ASME Papers Conference Year Paper Title Paper Author Page Number Other ASME Biennial  1987  Stability and Damped Critical Speeds of a Flexible Rotor in Fluid-Film Bearings   J. W. Lund   1    ASME Biennial  1987  Experimental Verification of Torquewhirl-the Destabilizing Influence of Tangential Torque   J. M. Vance and K. B. Yim   11    ASME Biennial  1987  Instability and Unbalance Response of Dissymmetric Rotor-Bearing Systems   P. M. Guilen, P. Berthiet, G. Ferraris, and M. Lalanne   19    ASME Biennial  1987  Stability of Cracked Rotors in the Coupled Vibration Mode   C. A. Papadopoulos and A. D. Dimarogonas   25    ASME Biennial  1987  The Stability of Rotating Shafts When Distributed Gyroscopic Effects Are Taken Into Account   Yu, Haomin   35    ASME Biennial  1987  Rotor Dynamic Analysis on Personal Computers   V. K. Obeid   41    ASME Biennial  1987  Evaluation of Pivot Stiffness for Typical Tilting Pad Journal Bearing Designs   R. G. Kirk and S. W. Reedy   49    ASME Biennial  1987  Identification of the Dynamic Characteristics of Oil-Film Bearings   Q. Zhang, G. Lallement, and R. Fillod   57    ASME Biennial  1987  A Versatile Finite Element Analysis of Journal Bearings and Oil Film Dampers   M. E. Samaha and T. S. Sankar   63    ASME Biennial  1987  System Configuration and Its Vibration Response   Z. A. Parszewski   71    ASME Biennial  1987  Automatic Generation of Component Modes for Rotordynamic Substructures   S. H. Crandall and N. A. Yeh   79    ASME Biennial  1987  Flexural Vibration of Turbine Generators: Simple Representations of Symmetrical Rotors   T. S. Wilkinson   85    ASME Biennial  1987  Improvements in Lightly Loaded Rotor/Bearing and Rotor/Seal Models   A. Muszynska   91    ASME Biennial  1987  Attenuation of Rotor Vibration Using Controlled-Pressure Hydrostatic Squeeze-Film Dampers   M. L. Adams and H. Zahloul   99    ASME Biennial  1987  Estimation of Squeeze-Film Bearing Inertia, Damping and Stiffness Coefficients   C. R. Burrows, N. C. Kucuk, M. N. Sahinkaya, and R. S. Stanway   109    ASME Biennial  1987  Application of Equivalent Linearizing Method to the Analyses of Flexible Rotor-Uncentralised Squeeze Film Damper Bearings System   Meng Guang, Xu Jian-Kang, and Xue Zhong-Qing   115    ASME Biennial  1987  Theoretical and Experimental Investigation on the Non Synchronous Responses of Flexible Rotor- Uncentralised Squeeze Film Damper Bearings System   Meng Guang, Zhu Chang-Sheng, Feng Xin Hai, and Xue Zhong-Qing   121    ASME Biennial  1987  Electromagnetic Control of Oil-Film Supported Rotors Using Sparse Measurements   C. R. Burrows, M. N. Sahinkaya, and S. Clements   127    ASME Biennial  1987  Active Control of a Flexible, Two-Mass Rotor Suspended in Magnetic Bearings   B. G. Johnson   133    ASME Biennial  1987  Active Electromagnetic Suspension of an Elastic Rotor: Modelling, Control, and Experimental Results   J. R. Salm   141    ASME Biennial  1987  Application of an Active Magnetic Bearing for Vibration Control Near Critical Speeds in Large Rotating Machines   C. Chan Hew Wai and J. Morel   151    ASME Biennial  1987  Subsynchronous Orbits Observed in Rotor - Squeeze Film Damper System   Changsheng Zhu and Xinhai Feng   159    ASME Biennial  1987  High Order Subharmonic Response of High Speed Rotors in Bearing Clearance   F. F. Ehrich   167    ASME Biennial  1987  Supercritical Shafting for an Advanced Turboprop Engine   P. D. Hylton and S. A. Klusman   175    ASME Biennial  1987  A General Theory for Viscoelastic Rotor Dynamics   W. Zhang   183    ASME Biennial  1987  Control of Flexible Rotors by Active Elements   H. Ulbrich   191    ASME Biennial  1987  Modelling and Control of Turbomachinery Vibrations   R. Firoozian and R. Stanway   197    ASME Biennial  1987  Excitation Force Identification of Rotating Machines Using Operational Rotor/Stator Amplitude Data and Analytical Synthesized Transfer Functions   J. Verhoeven   207    ASME Biennial  1987  Rotor Active "Anti-Swirl" Control   A. Muszynska, W. D. Franklin, and D. E. Bently   215    ASME Biennial  1987  A Two-Plane Extension of the Four Run Balancing Technique   L. J. Everett   223    ASME Biennial  1987  Balancing With Phase Only (Single-Plane and Multiplane)   W. C. Foiles and D. E. Bently   229    ASME Biennial  1987  Rotor Vibration Control, Part I: Periodically Forced Vibrations   Z. Gosiewski.   237    ASME Biennial  1987  Rotor Vibration Control, Part It: Free Vibrations   Z. Gosiewski.   245    ASME Biennial  1987  Formulation of Labyrinth Seal Effects in Rotor Dynamic Analyses   J. Dugundji, C. N. Duong, Y. -P. A. Chang   253    ASME Biennial  1987  Experimental Investigations of Rotor Whirl Excitation Forces Induced by Labyrinth Seal Flow   C. Rajakumar and F. Sisto   263    ASME Biennial  1987  Experimental Study on the Static and Dynamic Characteristics of Screw Grooved Seals   H. Kanki and T. Kawakami   273    ASME Biennial  1987  Experiments on Dynamic Stiffness and Damping of Tapered Bore Seals   D. P. Fleming   279    ASME Biennial  1987  On the Dynamic Response of a Helical Geared System Subjected to a Static Transmission Error in the Form of Deterministic and Filtered White Noise Inputs   S. V. Neriya, R. B. Bhat, and T. S. Sankar   287    ASME Biennial  1987  The Vibration Problem in Gear Coupled Rotor Systems   J. W. David and N. -G. Park   297    ASME Biennial  1987  Coupled Whirling Dynamics of a Flexible Bladed Disk/Shaft System Considering Coriolis Effects   N. Hagiwara and H. Iijfima   305    ASME Biennial  1987  Application of Chaos Theory to the Contacting Dynamics of High-Speed Rotors   W. M. Szczygielski   319    ASME Biennial  1987  Rotor Dynamic Analysis Axially Coupled System   I. Anwar and R. Colsher   327    ASME Biennial  1987  Evaluation of Exiting Forces in Turbomachinery Induced by Flow in Labyrinth Seals   M. Baumgartner   337    ASME Biennial  1987  A Method for Calculating Labyrinth Seal Inlet Swirl Velocity   R. G. Kirk   345    ASME Biennial  1987  Calculation of Rotordynamic Coefficients and Leakage for Annular Gas Seals by Means of Finite Difference Techniques   R. Nordmann, F. J. Dietzen, and H. P. Weiser   351    ASME Biennial  1987  Numerical and Analytical Study of Fluid Dynamic Forces in Seals and Bearings   L. T. Tam, A. J. Przekwas, A. Muszynska, R. C. Hendricks, M. J. Braun, and R. L. Mullen   359    ASME Biennial  1987  Hybrid Finite Element -- Boundary Element Simulation of Rotating Machinery Supported on Flexible Foundation and Soil   L. L. Earles, A. B. Palazzolo, C. -K. Lee, and C. H. Gerhold   371    ASME Biennial  1987  Numerical Computation Method for Rotor-Foundation (or Casing) Dynamics: (Based on the Myklested- Prohl Transfer Matrix Method)   T. Inagaki   383    ASME Biennial  1987  The Complex Modal Analysis for the Large Rotor-Bearing-Foundation System   Zheng Zhao~chang, Wu Nan-ping, and Zhou Kiao-p lng   397    ASME Biennial  1987  An Investigation of Vibration Characteristics of Rotor and Rotor-Support System for Locomotive Gasturbine   Xia Songbo, Wu Xinhua, and Wang Guangming   399    ASME Biennial  1987  Dynamic Characteristics of Annular Tapered Pump Seal   T. Iwatsubo and B. -S. Yang   405    ASME Biennial  1987  Theory Versus Experiment for the Rotordynamic Coefficients of Labyrinth Gas Seals: Part I - A Two Control Volume Model   J. K. Scharrer   411    ASME Biennial  1987  Theory Versus Experiment for the Rotordynamic Coefficients of Labyrinth Gas Seals: Part II - A Comparison to Experiment   D. W. Childs and J. K. Scharrer   427    ASME Biennial  1987  The Effects of Elastic Deformation on Seal Dynamics   T. Iwatsubo and B. S. Yang   435    ASME Biennial  1987  Circular Whirling and Unbalance Response of Nonlinear Rotors   G. Genta and A. Repaci   441    ASME Biennial  1987  Spiral Vibrations of Rotors   J. Schmied   449    ASME Biennial  1987  Stability of Rotation of a Rotor With a Winding Band   L. Cveticanin   457    ASME Biennial  1987  Dynamics of Textile Spindles on a Programmable Calculator   M. Callskan, M. A. Demircelik, and B. E, Platin  461    ASME Biennial  1987  The Dynamic Response of Rotors to Rubs During Startup   A. J. Smalley   467    ASME Biennial  1987  Rub Interactions of Flexible Casing Rotor Systems with Base Excitations   F. K. Choy, J. Padoran, and C. Batur   477    ASME Biennial  1987  Transient Rotor Dynamic Rub Phenomena; Theory and Test   A. F. Kascak, A. B. Palazzolo, and G. Montaque   485    ASME Biennial  1987  Synchronization Theory of Self-Synchronous Vibrating Machines With Ellipse Motion Locus   B. C. Wen   495    ASME Biennial  1987  Torsional Vibrations in Turbogenerators Due to Network Disturbances   P. Schwibinger, R. Nordmann, R. Wohlrab, K. Steigeder, and P. Wutsdorff   501    ASME Biennial  1987  Diagnosing Vibration Problems in Vertically Mounted Pumps   T. J. Walter, M. M. Marchlone, and H. G. Shugars   511    ASME Biennial  1987  A Numerical Method for Studying the Mechanical Vibrations of a Small Aerogenerator   N. Beauruler   519    ASME Biennial  1987  On the Transient Analysis of Rotor-Bearing Systems   R. Subblah and N. F. Rieger   525    ASME Biennial  1987  Transient Whirling of a Rotating Shaft With an Unbalanced Disk   Shuh-Jing Ying   537    ASME Biennial  1987  Transient Analysis of Rotors by Transfer Matrix Method   J. S. Rao, K. V. B. Sarma, and K. Gupta   545    ASME Biennial  1987  A Combined Sturm Sequence and Riccati Transfer Matrix Method for Eigenproblem Solution of a Flexible Rotor   H.-L. Qlausson   553    ASME Biennial  1987  Rotor Stability of High Pressure Multistage Centrifugal Compressors   H. R. Wyssmann   561    ASME Biennial  1987  Dynamic Analysis of Centrifugal Pump Rotors With Fluid-Mechanical Interactions   141. Diewald and R. Nordmann   571    ASME Biennial  1987  Fluid-Structure Interaction Forces at Pump-impeller-Shroud Surfaces for Rotordynamic Calculations   D. W. Childs   581    ASME Biennial  1987  The Responses of the Simple Rotor With Surface Transverse Crack   Y. B. Wang, Z. S. Duan, X. L. Huang, and B. C. Wen   595    ASME Biennial  1987  Experiments and Calculations on the Vibrations of Rotating Radial Impellers   H. Irretier   601    ASME Biennial  1987  Crack Depth Analysis of a Rotating Shaft by Vibration Measurement   B. O. Dirr and B. K. Schmalhorsr   607    ASME Biennial  1987  Development of an On-Line Rotor Crack Detection and Monitoring System   I. Imam, J, Scheibel, S. H. Azzaro, and R. J. Bankert   615    ASME Biennial  1987  Turbine-Alternator Run-Down Vibration Analysis: Automated Crack Detection   R. G. Herbery   631    ASME Biennial  1989  Response of a Servomechanism Controlled Swinging Arm Actuator for Head Positioning in Magnetic Storage Devices  B. M. Khan and R. B. Bhat   1    ASME Biennial  1989  Dynamic Optimization of a Rotor-Bearing Set  D. Bendeux and D. Doizelet   11    ASME Biennial  1989  Experimental Verification of Blade-Disc-Rotor Coupled Torsional Vibration for Large Turbine   H. Kanki and Y. Yamamoto   17    ASME Biennial  1989  Optimization Study of Engine Mounting Systems  S. Saitoh and M. Igarashi   23    ASME Biennial  1989  A Convenient Method for Diagnosis of Shafting Crack  M. Zhao and Z. H. Luo   29    ASME Biennial  1989  Flexibility Matrix Calculation for a Stepped Rotor Shaft  S. Doughty   35    ASME Biennial  1989  Influence of Impeller Shroud Forces on Turbopump Rotor Dynamics  J. P. Williams and D. W. Childs   41    ASME Biennial  1989  The Use of Beam-Like Modal Data for Stiffness Profile Estimation by the EBS Method - Part I: Justification and Implementation  T. A. Vest and M. S. Darlev   51    ASME Biennial  1989  Vibration of Rotor Partially Filled With Two Kinds of Liquids  B. S. Yang, Y. H. Yu, and T. Iwatsubo   57    ASME Biennial  1989  Fluid Induced Rotordynamic Instability of a Rotor With an Unbound Centrifugal Impeller  J. Colding-Jorgensen   63    ASME Biennial  1989  A New Method for the Critical Speed Calculation of Rotor-Bearing Systems - Part I: Theory  P. Y. Klm, R. C. Flanagan, and L R. G. Lowe   71    ASME Biennial  1989  A New Method for the Critical Speed Calculation of Rotor-Bearing Systems - Part II: Application  P. Y. Klm, R. C. Flanagan, and I. R. G. Lowe   77    ASME Biennial  1989  Dynamic Response of Rotors Using Modal Reduction Techniques  R. Subblah, R. B. Bhat, and T. S. Sankar   83    ASME Biennial  1989  Vibrations of Anisotropic Rotor-Bearing Systems  Y.-G. Jei and C.-W. Lee   89    ASME Biennial  1989  Vibrations of Rotating Disc-Like Structures - A Transfer Matrix Approach  M. Ghosh, A. Rajamani, and IV. Ganesan   97    ASME Biennial  1989  Identification of Modal Parameters of Rotating Systems Using Perturbation Techniques: Part 1   A. Muszynska, D. E. Bently, W. D. Franklin, and R. D. Hayashida   107    ASME Biennial  1989  Identification of Modal Parameters of Rotating Systems Using Perturbation Techniques: Part 2   A. Muszynska, D. E. Bently, W. D. Franklin, and R. D. Hayashida   113    ASME Biennial  1989  Periodic Response Investigation of Large Order Nonlinear Rotordynamic Systems Using Collocation   A. N. Jean and H. D. Nelson   119    ASME Biennial  1989  Coupled Bending - Bending Vibrations of Rotating Pretwisted Cantilever Blades-Method of Polynomial Frequency Equation   P. V. Reddy, K. N. Gupta, and J. S. Rao   129    ASME Biennial  1989  Coupled Vibration Analysis: Torsional Vibration of Turbine-Generator-Blade Coupled System   A. Okabe, R. Kaneko, O. Matsushita, K. Namura, and T. Yoshida   135    ASME Biennial  1989  Modeling Rotating Shafts Using Axisymmetric Solid Finite Elements With Matrix Reduction   R. W. Stephenson and K. E. Rouch   141    ASME Biennial  1989  The Performance of the Runge-Kutta Method in the Context of Mechanism Systems With Discontinuities   J. M. B. Brown, K. Soorig, W. K. D. Borthwick, M. V. Gandhi, and B. S. Thompson   149    ASME Biennial  1989  Modeling of Rotor-Foundation Systems Using Frequency-Response Functions in a Finite Element Approach   K. E. Rouch, T. H. McMains, and R. W. Stephenson   157    ASME Biennial  1989  Reduced Order Rotor Modeling Combining Theoretical and Experimental Data   L F. Santos and Id. I. Weber   167    ASME Biennial  1989  Transient Response of a Large Turbocharger Rotor   G. M. Chapman and J. B. Turnbull   173    ASME Biennial  1989  A New Method for Transient Dynamic Analysis of Rotors Using Successive Merging and Condensation Techniques   S. Ratan and J. Rodriguez   181    ASME Biennial  1989  A Wave Propagation for the Analysis of Transient Torsional Vibrations Due to Start-Up of a Rotor Machine   R. Bogacz, T. Szolc, and H. Irretier   187    ASME Biennial  1989  Transient Vibration of an Asymmetric Rotor System Through Critical Speed   Z. C. Fang artd Z. H. Luo   191    ASME Biennial  1989  Post-Stability (Limit Cycle) Operation in Terms of Bearings Alignment   Z. A. Parszewski and K. Krynicki   199    ASME Biennial  1989  A Generalized Approach to the Buckling Stability of Rotor Systems   V. Arun, S. Jayaram, and L. D. Mitchell   205    ASME Biennial  1989  Stability of an internally Damped Timoshenko Rotor Under Dynamic Axial Loads   S. K. Sinha   213    ASME Biennial  1989  Stability Behavior of Geared Rotor Systems Regarding Torsional Lateral Coupling   A. Zuerbes, T. Neumer, A. Klimmek, P. Schwibinger, and R. Nordmann   217    ASME Biennial  1989  Stability Analysis of Force Coupled Motion in Helical Geared Rotor Systems   S. V. Neriya, R. B. Bhat, and T. S. Sankar   225    ASME Biennial  1989  Detection of Developing Bearing Failures by Means of Vibration   Z. Reif and M. S. Lai   231    ASME Biennial  1989  Experimental Investigation of Cavitation Effects on the Squeeze Films Force Coefficients   F. Y. Zeidan and J. M. Vance   237    ASME Biennial  1989  Vibration Control of a Translating String Coupled to Hydrodynamic Bearings   C. A. Tan, B. Yang, and C. D. Mote, Jr.   243    ASME Biennial  1989  Experimental Determination of tile Journal Bearing Oil Film Coefficients by the Method of Selective Vibration Orbits   K. Brockwell and W. Dmochowski   251    ASME Biennial  1989  Variable Impedance Hydrodynamic Journal Bearings for Controlling Flexible Rotor Vibrations   M. J. Goodwin, T. Boroomand, and C. J. Hooke   261    ASME Biennial  1989  The Role of Bearing Support Stiffness Anisotropy in Suppression of Rotordynamic Instability   F. Ehrich   269    ASME Biennial  1989  The Elastodynamic Response of a Slider-Crank Mechanism With Clearance in the Gudgeon-Pin Bearing: A Theoretical and Experimental Investigation   K. Soong and B. S. Thompson   275    ASME Biennial  1989  Rotor-Bearing Asymptotic Response for a Frequency Sweep Test   A. El Hafidi and G. Lallement   285    ASME Biennial  1989  Prediction of Steady State Response of Flexible Rotor Systems With Nonlinear Supports   T. N. Shiau and A. N. Jean   293    ASME Biennial  1989  Free Vibration Analysis of Continuous Shaft on Elastic Bearings by Timoshenko Beam Theory   Y.-S. He and T. C. Huang   301    ASME Biennial  1989  Influence of Active Magnetic Bearing Sensor Location on the Calculated Critical Speeds of Turbomachinery   R. G. Kirk, J. Keesee, D. Ohanehi, and F. Pinckney   309    ASME Biennial  1989  Preliminary Experiments of Eddy Current Magnetic Bearing Performance   P. McLaren, L. Ting, E. Shea, K. Connor, and J. Tichy   317    ASME Biennial  1989  Test of an Active Magnetic Bearing in Liquid Nitrogen   K. W. Lang   321    ASME Biennial  1989  Active Vibration Control for Flexible Rotor by Optimal Direct-Output Feedback Control   K. Nonami, E. DiRusso, and D. P. Fleming   327    ASME Biennial  1989  A Programmable Electromagnetic Bearing for Vibration Control of a Flexible Shaft   C. D. Bradfield, J. B. Roberts, and S. Karunendiran   335    ASME Biennial  1989  Analysis, Design, and Testing of a Magnetic Bearing for a Centrifuge   R. B. Zmood, D. K. Artand, and J. A. Kirk   345    ASME Biennial  1989  An Active Optimal Control Strategy of Rotor Vibrations Using External Forces   W. Zhu, L Castelazo, and H. D. Nelson   351    ASME Biennial  1989  Cross Feedback Stabilization of the Digitally Controlled Magnetic Bearing   Y. Okada, B. Nagai, and T. Shimane   361    ASME Biennial  1989  Test and Theory for Piezoelectric Actuator-Active Vibration Control of Rotating Machinery   A. B. Palazzolo, R. R. Lin, A. F. Kascak, J. Montague, and R. M. Alexander   367    ASME Biennial  1989  A Method of Rotor Vibration Control Via Microprocessor   Z. Gosiewski   375    ASME Biennial  1989  Spray Automated Balancing of Rotors: How Process Parameters Influence Performance   A. J. Smalley, FI. M. Baldwin, D. P. Fleming, and J. S. Yuhas   381    ASME Biennial  1989  A Method for Using Transfer Matrix Methods for Balancing Flexible Rotors   F. H. Speckhart and J. A. Euler   389    ASME Biennial  1989  A Study of Whole Machine Balancing Technique for Overhung Centrifuge With Flexible Supports   Z. Baotang, T. S. Sankar, V. Kamala, and H. Shizheng   395    ASME Biennial  1989  On-Line Thermal Balancing Technique for a Large Turbo-Generator   M. Zumbach, G. Schweitzer, and K. Schoellhorn   403    ASME Biennial  1989  A New Balance Method for Flexible Rotors With Asymmetric Principal Stiffnesses   X. Songbo, W. Xinghua, W. Guangming, P. Yucai, L. Rongqiang, and X. Shichang   411    ASME Biennial  1989  Experimental and Numerical Analysis of Read/Write Head Suspension Dynamics for High Performance Floppy Drive Systems  G.M. Frees and D.K. Miu  1, vol 2    ASME Biennial  1989  Coupled Vibratrion of Cracked Shafts  C.A. Papadopoulos and A.D.Dimarogonas  7, vol 2    ASME Biennial  1989  Resonance Frequency Prediction of Automotive Serpentine Belt Drive Systems by Computer Modelling  R.C.S. Gaspar and LE.Hawker  13, vol 2    ASME Biennial  1989  Actuator Design for Rotor Control  H.Ulbrich and J.Althaus  17, vol 2    ASME Biennial  1989  Analysis of Non-Repeatable Radial Vibration of Magnetic Disk Spindles  K. Ono, N. Saiki,Y. Sanada, and A. Kumano  23, vol 2    ASME Biennial  1989  Dynamic Simulation for Predicting Surface Roughness in Turning  D. Y.Jang and A. Seireg  31, vol 2    ASME Biennial  1989  Modeling and Sensitivity Studies of the Feed drive System of a CNC lathe Driven by a DC Motor  M.G. Mehrabi and A. Hemami  37, vol 2    ASME Biennial  1989  Regenerative Chatter Vibration of Cut-Off Type lathe Tools  E Marui, M. Hashimoto, and S. Kato  45, vol 2    ASME Biennial  1989  Chatter Growth Analysis by the Extended Interpretation of the Theoretical Stability Chart  K. Jemielniak and A. Widota  51, vol 2    ASME Biennial  1989  Modeling and Prediction of Dynamic Stability of Milling Machines  Ting Xian Zhang and Bao Shun Liu  57, vol 2    ASME Biennial  1989  Modeling and Finite Element Analysis of Drill Bit Vibrations  O. Tekinalp and A. G. Ulsoy  61, vol 2    ASME Biennial  1989  Enhancement of Dynamic Quality of a Machine Tool Using Frequency Response Optimization Method  E.I. Rivin and W.D'Ambrogio  69, vol 2    ASME Biennial  1989  Chatter Suppression by Using Piezoelectric Active Damper  T. Matsubara, H. Yamamoto, and H.Mizumoto  79, vol 2    ASME Biennial  1989  A Modification of Machine Tool Dynamical Properties Using Vibration Absorbers  K. Marchelek, S. Berczynski, and A. Witek.  85, vol 2    ASME Biennial  1989  The Application of Component Mode Synthesis Techniques to the Dynamic Analysis of the Machine Tool Spindle Systems  Yuan Bijun  91, vol 2    ASME Biennial  1989  The SSME HPFTP Wavy Interstage Seal: Part I - Seal Analysis  J.K. Scharrer and D.J. Nunez  95, vol 2    ASME Biennial  1989  The SSME HPFTP Wavy Interstage Seal: Part II - Rotordynamic Analysis  B. T. Murphy, J. K. Scharrer, and L. A. Hawkins  101, vol 2    ASME Biennial  1989  Calculation of Rotordynamic Coefficients for Labyrinth Seals Using a Three Dimensional Finite Difference Method  P. Weiser and R. Nordmann  109, vol 2    ASME Biennial  1989  Calculation of Velocity and Pressure Fields in Labyrinth Seals of Pumps  F. Banquet  115, vol 2    ASME Biennial  1989  Study on Self-Excited Vibration Caused by Steam Fluid Force in Labyrinth Seals  Huang Xiuzhu, Zhang Xueyan, and Zhang Youzhu  123, vol 2    ASME Biennial  1989  Advanced Analysis of Multi-Ring Liquid Seals  S.W. Reedy and R.G. Kirk  129, vol 2    ASME Biennial  1989  Calculations of Dynamic Forces in Liquid Annular Seal  T. Iwatsubo, T. Matsumoto, and Y. Tsujimoto  135, vol 2    ASME Biennial  1989  Experimental Study of Dynamic Fluid Forces and Moments for a Long Annular Seal  Y. Kanemori and T. Iwatsubo  141, vol 2    ASME Biennial  1989  Unbalance Response of a Jeffcott Rotor Incorporating Long Squeeze Film Dampers  A. El-Shafei  149, vol 2    ASME Biennial  1989  Numerical and Experimental Study of a Finite Submerged Squeeze Film Damper  I. Kinsale and J. Tichy  159, vol 2    ASME Biennial  1989  Identification of Squeeze-Film Bearing Dynamics Using a Recursive, Frequency-Domain Filter  R. Stanway, T. K. Tee, and J. E. Mottershead  167, vol 2    ASME Biennial  1989  Prediction of the Performance of Cavitated Squeeze-Film Dampers  C. R. Burrows, N. C. Kucuk, and M. N. Sahinkaya   177, vol 2    ASME Biennial  1989  Friction Damping of Circular Motion  J.H. Griffin and C-H. Menq  187, vol 2    ASME Biennial  1989  A Study of the Preview Dynamic Damper  N. Tanaka and Y. Kikushima  195, vol 2    ASME Biennial  1989  Concepts and Solutions of Damping Description in Materials and Members  L Gaul  205, vol 2    ASME Biennial  1989  Dynamic Reanalysis of Weakly Non-Proportionally Damped Gyroscopic Systems  Zhao-Chang Zheng and YongHu  215, vol 2    ASME Biennial  1989  A Decentralized Noncollocated Active Vibration Control Algorithm  C.J. Maday and N.H. Johnson  223, vol 2    ASME Biennial  1989  Smart Structures Incorporating Electro-Rheological Fluids for Vibration-Control and Active Damping Applications: An Experimental Investigation  S. B. Choi, B. S. Thompson, and M. V. Gandhi  229, vol 2    ASME Biennial  1989  Experimental Evaluation of Wide Band Active Vibration Controllers  A. V. Metcaffe and J. S. Burdess  237, vol 2    ASME Biennial  1989  Modal Control of a Flexible Beam With Multiple Sensors and Actuators  P. K. Raju and S.P.Sun  245, vol 2    ASME Biennial  1989  Vibration Control of the Elastodynamic Response of High-Speed Flexible Linkage Mechanisms  C.K. Sung and Y.C. Chen  253, vol 2    ASME Biennial  1989  Viscoelastic Circular Plate Wave Guide Absorber  C.D. Hettema,Y.S. Shin, K.S. Kim  263, vol 2    ASME Biennial  1989  An Active Dynamic Vibration Absorber for Multi-Degree-of-Freedom Systems  H. Nishimura, K. Yoshida, and T. Shimogo  275, vol 2    ASME Biennial  1989  Application of Clearance Viscous Damper  S. Sathikh and S. Ganapathy  283, vol 2    ASME Biennial  1989  Transfer Function Method for Active Control Design of Structure Constrained by Frequency  D.Y. Chen,Z.W. Hu, and F.Y. Fan  289, vol 2    ASME Biennial  1989  Low Frequency Vibration Isolation Technology for Microgravity Space Experiments  C.M. Grodsinsky and G. V. Brown  295, vol 2    ASME Biennial  1989  Active Vibration Isolation For Micro-Displacement Feedback Control  H. S. Tzou  303, vol 2    ASME Biennial  1989  Advanced Electronics Transport Module Designed for Military Environment  D. Shimansky  311, vol 2    ASME Biennial  1989  Adaptive Control for Semi-Active Isolators  S. Bellizzi and R. Bouc  317, vol 2    ASME Biennial  1989  The Use of Canonical Correlation Analysis in Component Model Reduction  R.E. Skelton and D. Da  325, vol 2    ASME Biennial  1989  Dynamics and Control of Tethered Satellite Systems: A Brief Review  A.K. Misra and V.J. Modi  333, vol 2    ASME Biennial  1989  An Approach to Dynamics and Control of a Class of Interconnected Rigid/Flexible Orbiting Bodies  Y. Morita and V.J. Modi  347, vol 2    ASME Biennial  1989  Generic Model Laboratory Tests for Large Flexible Structure Control  T. Lange  355, vol 2    ASME Biennial  1989  Effects of Flexibility on the Attitude Stability of Spinning Spacecraft  B.N. Agrawal  363, vol 2    ASME Biennial  1989  Some Definitions of Degree of Controllability (Observability) for Discrete-Time Systems and Their Applications  X. Guangqian and P.M. Bainum  369, vol 2    ASME Biennial  1991  Observations of Subcritical Superharmonic and Chaotic Response in Rotordynamics  Fredric Ehrich   1    ASME Biennial  1991  Analytical and Experimental Simulation of Loose Pedestal Dynamic Effects on a Rotating Machine Vibrational Response  Pavel Goldman and Agnes Muszynska   11    ASME Biennial  1991  Response of a Rotating Beam Subject to an Accelerating Force  A. Argento and R. A. Scott   19    ASME Biennial  1991  Spontaneous Sidebanding in High Speed Rotordynamics  Fredric Ehrich   25    ASME Biennial  1991  Flexural Critical Speeds of a Two-Rotor Bearing System With One Overhang  C. Y. Chow, I-Chih Wang, and Rae Chow   35    ASME Biennial  1991  Weight-Excited Vibrations of Rotating Curved Beams  Jorg Wauer   43    ASME Biennial  1991  Nonlinear Steady-State Rotordynamic Analysis Using Transfer Coefficient Method  M. Kobayashi, S. Saito, and S. Yamauchi   51    ASME Biennial  1991  A Slewing Motor-Beam System: Performance, Behavior and Dimensional Analysis  Jy-Jen F. Sah and Roger W. Mayne   59    ASME Biennial  1991  Virtual Balancing of Rotors Supported by Magnetic Bearings  H. Ming Chen and C. P. Roger Ku   65    ASME Biennial  1991  A Comparison of Experimental Results and Theoretical Predictions for the Rotordynamic Coefficients of Short (L/D - 1/6) Labyrinth Seals  Joseph M. Pelletti and Dara W. Childs   69    ASME Biennial  1991  Identification and Resolution of a One-Times Slip Frequency Synchronous Motor Field Start Up Problem  F. H. Wolff and J. F. Hustak   77    ASME Biennial  1991  Active Vibration Control of Flexible Rotor Using H~ Control Theory  K. Nonami, J. W. Wang, M. Sampei, and T. Mira   85    ASME Biennial  1991  Consistent Modeling of Rotating Timoshenko Shafts Subject to Axial Loads  S. H. Choi, C. Pierre, and A. G. Ulsoy   93    ASME Biennial  1991  Rotor System Modeling With Foundation Matrices From Experimental Modal Data  Robert W. Stephenson and Keith E. Rouch   105    ASME Biennial  1991  Modelling of an Elastic Disk With Finite Hub Motions and Small Elastic Vibrations With Application to Rotordynamics  George T. Flowers   115    ASME Biennial  1991  Rotor Whirl Measurements on a Long Rotating Cylinder Partially Filled With Liquid  Jorgen Colding-Jorgensen   127    ASME Biennial  1991  Accurate Free Vibration Analysis for Rotating Shaft  Bo Suk Yang and Walter D. Pilkey   133    ASME Biennial  1991  Determination of Non-Conservative Coupling Loss Factors Between Rotating Machinery Components  J. M. Cuschieri, J. C. Sun, and F. Journeau   139    ASME Biennial  1991  On the Dynamics of a Beam Rotating at Nonconstant Speed  Yii-Mei Huang and Ming-Shang Lin   147    ASME Biennial  1991  The Influence of Mounting Compliance and Operating Conditions on the Radial Stiffness of Ball Bearings: Analytic and Test Results  M. F. Butner, B. T. Murphy, and R. A. Akian   155    ASME Biennial  1991  Influence of Thermal Conductivity of Lubricant on the THD Characteristics of a Plain Journal Bearing  C. Rajalingham, B. S. Prabhu, R. B. Bhat, and G. D. Xistris   163    ASME Biennial  1991  Jumping Phenomenon in Journal Bearing  Krystof Kryniski   169    ASME Biennial  1991  Effect of Backlash on Vibration Spectrum in Spur Gearboxes Incorporating Sleeve Bearings  Fawzi M. A. EI-Saeidy   175    ASME Biennial  1991  Design of Magnetic Bearings for Rotor Systems With Harmonic Excitations  D. Dhar and L. E. Barrett   183    ASME Biennial  1991  Transient Response Technique Applied to Active Magnetic Bearing Machinery During Rotor Drop  Toshiyasu Ishii and R. Gordon Kirk   191    ASME Biennial  1991  The Rocketdyne Multifunction Tester: Operation of a Radial Magnetic Bearing as an Excitation Source  L. A. Hawkins, B. T. Murphy, and K. W. Lang   201    ASME Biennial  1991  Tile Effect of Sensor Location on the Forced Response Characteristics of Rotors With Active Magnetic Bearings  D. Rawal, J. Keesee, and R. Gordon Kirk   209    ASME Biennial  1991  Fluid Inertia Forces in Squeeze Film Dampers  A. El-Shafei and S. H. Crandall   219    ASME Biennial  1991  The Effectiveness of Porous Squeeze Film Dampers for Suppressing Nonsynchronous Motions  Shiplng Zhang, Litang Yan, Qihan Li, and Yoshihiko Kawazoe   229    ASME Biennial  1991  Optimal Design of Centered Squeeze Film Dampers  C. Nataraj and Hashem Ashrafiuon   237    ASME Biennial  1991  The Effect of Bistable Jump on the Reliability of Squeeze Film Damper  Zhu Changsheng   245    ASME Biennial  1991  Experimental Investigation on the Dynamic Pressure and Force Response of a Partially Sealed Squeeze Film Damper  G. Meng, L. A. San Andres, and J. M. Vance   251    ASME Biennial  1991  Controllable Squeeze Film Damper: An Application of Electro-Rheological Fluid  Shin Morishita and Jun'ichi Mitsui   257    ASME Biennial  1991  Investigation on the Bistable Jump in Subcritical Speed Range of Rotor Supported on Uncentralized Squeeze Film Dampers  Zhu Changsheng, Wang Xixuan, and Fu Caigao   263    ASME Biennial  1991  Vibrations of Foundations Interacting With Subsoil Experimental Studies and BE Calculations  L. Gaul   269    ASME Biennial  1991  Estimation of Response and Loss Factor of Damped Sandwich Beam  S;. Markus and T. Nanasi   275    ASME Biennial  1991  Parameter Identification of Non-Linear Impact Damper  Kang-Yu He and Xiao-Xu Yuan   281    ASME Biennial  1991  Self-Operating On-Off Type Semi-Active Damper and Its Performance Test  Hyeong-keun Klm, Nak Hoon Sung, and Youn-sik Park   287    ASME Biennial  1991  Dynamic Torque Response of an Electro-Rheological Clutch  R. Firoozian, W. A. Bullough, S. Xiao, A. Hosseini-Sianaki, A. R. Johnson, and J. Makin   295    ASME Biennial  1991  An Efficient Method for Calculating Damped Critical Speeds of Rotor-Bearing Systems  D. Z. Wang and D. L. Taylor   303    ASME Biennial  1991  Characteristic Study of Torsional Vibration on a Full Size Turbine-Generator Unit  Huang Xiuzhu, Zhang Xueyan, Sun Daixia, and Gong Qing   311    ASME Biennial  1991  Progressive Torsional-Axial Continued Vibrations in Crankshaft Systems: A Phenomenon of Coupled Vibration  X. G. Song, T. X. Song, D. X. Xue, and B. Z. Li   319    ASME Biennial  1991  Semiactive Control of Vibrations in Automobiles  Junghsen Lieh and Imtiaz Haque   325    ASME Biennial  1991  A Review of the Dynamics of Independently Rotating Wheel Systems for Railway Vehicles  S. Narayana Swamy, R. V. Dukkipati, and M. O. M. Osman   331    ASME Biennial  1991  Integral and State Variable Feedback Controllers for Improved Performance in Automotive Vehicles  Mohamed M. EIMadany   339    ASME Biennial  1991  A Study of Control Strategy for Vehicle Semi-Active Suspension System  Yiming Zhang and Ye Lin   347    ASME Biennial  1991  A Transfer Matrix Technique for Evaluating the Natural Frequencies and Critical Speeds of a Rotor With Multiple Flexible Disks  Fangsheng Wu and George T. Flowers   353    ASME Biennial  1991  Application of Generalized Polynomial Expansion Method to Nonlinear Rotor Bearing Systems  Jori Li Hwang and Ting Nung Shiau   355    ASME Biennial  1993  Thermal/Mechanical Effect of Rotor-to-Stator Rubs in Rotating Machinery   Muszynska, A.  1-6  CN000551375  ASME Biennial  1993  Rotor Whirl Forces Induced by the Tip Clearance Effect in Axial Flow Compressors   Ehrich, F.  7-18  CN000551387  ASME Biennial  1993  An Experimental Study of the Influence of Disk Flexibility and Rubbing on Rotordynamics   Wu, F.; Flowers, G. T.  19-26   CN000551399  ASME Biennial  1993  Steady-State Unbalance Response of Continuous Rotors on Anisotropic Supports   Curti, G.; Raffa, F. A.; Vatta, F.  27-34   CN000551405  ASME Biennial  1993  Improved Rotordynamic Unbalance Response Calculations Using the Polynomial Method   Murphy, B. T.  35-42   CN000551417  ASME Biennial  1993  Input Sensitive Dynamic Resistor of a Rotating System   Lee, B. K.  43-46   CN000551429  ASME Biennial  1993  Whirling of Composite-Material Driveshafts Including Bending-Twisting Coupling and Transverse Shear Deformation   Bert, C. W.; Kim, C.-D.  47-54   CN000551430  ASME Biennial  1993  Torsional Vibration Analysis of Shafts With Sections of Tapered Diameter   Baker, J. R.; Rouch, K. E.  55-66   CN000551442  ASME Biennial  1993  A Theoretical and Experimental Investigation of a Gas Operated Bearing Damper for Turbomachinery: Part I - Theoretical Model and Predictions   Sundararajan, P.; Vance, J. M.  67-84  CN000551454  ASME Biennial  1993  A Theoretical and Experimental Investigation of a Gas Operated Bearing Damper for Turbomachinery: Part II - Experimental Results and Comparison With Theory   Sundararajan, P.; Vance, J. M.  85-120  CN000551466  ASME Biennial  1993  A Waved Journal Bearing Concept-Evaluating Steady-State and Dynamic Performance With a Potential Active Control Alternative   Dimofte, F.  121-128   CN000551478  ASME Biennial  1993  Modelling Fluid Inertia Forces of Short Journal Bearings for Rotordynamic Applications   El-Shafei, A.  129-138   CN000551480  ASME Biennial  1993  A New Damper Seal for Turbomachinery   Vance, J. M.; Schultz, R. R.  139-148   CN000551491  ASME Biennial  1993  Commissioning of a High Speed Composite Rotor With Hydrostatic Dampers and Ceramic Rolling Element Bearings   Headifen, R. N.; Fuller, R. L.; Kitzmiller, J. R.  149-158   CN000551508  ASME Biennial  1993  Effect of Straight Through Labyrinth Seals on Rotordynamics   Vance, J. M.; Zierer, J. J.; Conway, E. M.  159-172   CN000551510  ASME Biennial  1993  Theory Versus Experiment for Short (L/D = 1/6) Honeycomb and Smooth Annular Pressure Seals   Childs, D. W.; Kleynhans, G. F.  173-180   CN000551521  ASME Biennial  1993  The Effect of Inlet Grooves and Swirl on the Dynamics of Long Annular Seals in Centrifugal Pumps   Ismail, M.; Brown, R. D.; France, D.  181-192   CN000551533  ASME Biennial  1993  Asymmetrical Rolling and Self Excited Vibrations in a Hot Roughing Mill   Jafari, A. A.; Tieu, A. K.; Basu, A.  193-202   CN000551545  ASME Biennial  1993  Non-Linear Vibrations and Asymmetry in Coupled Tandem Hot Rolling Mills   Jafari, A. A.; Tieu, A. K.; Basu, A.  203-212   CN000551557  ASME Biennial  1993  An Eigenvalue Inclusion Principle for Simple, Rotationally Periodic Structures   Shen, I. Y.  213-218   CN000551569  ASME Biennial  1993  Vibration of a Rotating Stepped Beam by the Distributed Transfer Function Method   Kuang, W.; Tan, C. A.  219-228   CN000551570  ASME Biennial  1993  High Speed Rotating Shafts Design Algorithm   Po Kee Wong  229-240   CN000551582  ASME Biennial  1993  Predicting the Vibrations of a Spinning Inflated Membrane   Segalman, D. J.; Slavin, A. M.  241-248   CN000551594  ASME Biennial  1993  A Theoretical Approach to Determine Angular Stiffness and Damping Coefficients of an Axial Spline Coupling in High-Speed Rotating Machinery   Ku, C.-P. R.; Walton, J. F.; Lund, J. W.  249-256   CN000551600  ASME Biennial  1993  Development of an On-Line PC-Based Diagnostic Expert System   Pawtowski, E. C.; Kirk, R. G.; Cochran, J. S.  257-264   CN000551612  ASME Biennial  1993  An Experimental Investigation of the Dynamic Characteristics of an Axial Spline Coupling in High-Speed Rotating Machinery   Walton, J. F.; Ku, C.-P. R.; Lund, J. W.  265-270   CN000551624  ASME Biennial  1993  Digital Measurement Method on Rotating Shaft Torsional Vibration   Fu, H.; Yan, P.  271-276   CN000551636  ASME Biennial  1993  Crack Detection in Turbo Rotors Vibrational Analysis and Fault Detection   Soeffker, D.; Bajkowski, J.; Mueller, P. C.  277-288   CN000551648  ASME Biennial  1993  Stability and Response of Rotors Supported on Active Magnetic Bearings   Ramesh, K.; Kirk, R. G.  289-296   CN000551650  ASME Biennial  1993  Internal Rotor Friction Induced Instability in High-Speed Rotating Machinery   Walton, J. F.; Martin, M. R.  297-306   CN000551661  ASME Biennial  1993  Rotating, Axially Loaded Timoshenko Shaft: Modeling and Stability   Karch, G.; Wauer, J.  307-314  CN000551673  ASME Biennial  1993  Stability and Stability Degree of a Cracked Flexible Rotor Supported on Journal Bearings   Guang, M.; Gasch, R.  315-324   CN000551685  ASME Biennial  1993  Isotropic Control of Rotor Bearing System   Kim, C.-S.; Lee, C.-W.  325-330   CN000551697  ASME Biennial  1993  Dynamic Analysis of Flexible Rotors Subjected to Torque and Force   Yun, J.-S.; Lee, C.-W.  331-338   CN000551703  ASME Biennial  1993  An Integrated Approach Toward the Dynamic Analysis of High-Speed Spindles: Part I - System Model   Chen, C. H.; Wang, K. W.; Shin, Y. C.  339-346  CN000551715  ASME Biennial  1993  An Integrated Approach Toward the Dynamic Analysis of High-Speed Spindles: Part II - Dynamics Under Moving End Load   Chen, C. H.; Wang, K. W.  347-354  CN000551727  ASME Biennial  1993  On the Generation of Bending Vibration in a Drill Rod   Kaski, J.  355-362   CN000551739  ASME Biennial  1993  Dynamic Characteristics of TEHD Tilt Pad Journal Bearing Simulation Including Multiple Mode Pad Flexibility Model   Kim, J.; Palazzolo, A.  363-380  CN000551740  ASME Biennial  1995  Modal Loss Factors of Thick Three-Layer Cylinders With Viscoelastic Core  Hamidzadeh, H. R.; Jiang, Y.  3-8  CN014995287  ASME Biennial  1995  Damping Machine Tools With Imbedded Viscoelastic Materials Constrained by Shear Tubes  Marsh, E. R.; Hale, L. C.  9-14  CN014995292  ASME Biennial  1995  Shape Optimization of Unconstrained Beam and Plate Damping Layers  Lumsdaine, A.; Scott, R. A.  15-22  CN014995300  ASME Biennial  1995  Vibration Analysis of Metal/Polymer/Metal Components  Mignery, L. A.  23-34  CN014995315  ASME Biennial  1995  H~2 Optimal Tuning of Passive Isolators and Absorbers  Van Pelt, T. H.; Bernstein, D. S.  35-40  CN014995320  ASME Biennial  1995  Transient Vibration Reduction Through the Use of Dual Absorbers  Bursal, F. H.  41-52  CN014995336  ASME Biennial  1995  An Electromechanical Vibration Absorber  Nagem, R. J.; Madanshetty, S.; Medhi, G.  53-58  CN014995341  ASME Biennial  1995  Active Vibration Absorption Using Delayed Resonator With Relative Position Measurement  Olgac, N.; Hosek, M.  59-66  CN014995357  ASME Biennial  1995  Digital Optimal Multivariable Control of a Smart Structure Featuring Piezoelectric Sensors and Actuators  Sannah, M.; Smaili, A.; Lahdhiri, T.  67-76  CN014995362  ASME Biennial  1995  Modeling, Actuation, and Control of an Active Fluid Vibration Isolator  Panza, M. J.; McGuire, D. P.; Jones, P. J.  77-88  CN014995378  ASME Biennial  1995  Effects of Desired Transmissibility Functions on the Performance and Design of Control Systems for Microgravity Isolation Systems  Tsai, N.-C.; Sinha, A.  89-96  CN014995383  ASME Biennial  1995  Chaotic Response of a Hard Duffing Type Vibration Isolator With Combined Coulomb and Viscous Damping  Leung, A. Y. T.; Ravindra, B.; Mallik, A. K.; Chan, C. W.  97-104  CN014995399  ASME Biennial  1995  Vibration Localization in Rotating Shafts: Part I - Theory  Galip Ulsoy, A.; Pierre, C.; Choi, S.  105-116  CN014995406  ASME Biennial  1995  Vibration Localization in Rotating Shafts: Part II - Experiment  Galip Ulsoy, A.; Pierre, C.; Choi, S.  117-124  CN014995411  ASME Biennial  1995  On the Active-Passive Hybrid Vibration Control Actions of Structures With Active Constrained Layer Treatments  Liao, W. H.; Wang, K.-W.  125-142  CN014995427  ASME Biennial  1995  Active Boundary Control of Elastic Cables  Baicu, C. F.; Rahn, C. D.  143-148  CN014995432  ASME Biennial  1995  A Variational Formulation: A Work-Energy Relation and Damping Mechanisms of Active Constrained Layer Treatments  Shen, I. Y.  149-160  CN014995448  ASME Biennial  1995  Energy Flow Control of Interconnected Structures: Part I - Modal Subsystems  Hall, S. R.  161-172  CN014995453  ASME Biennial  1995  Energy Flow Control of Interconnected Structures: Part II - Structural Subsystems  Hall, S. R.  173-184  CN014995469  ASME Biennial  1995  Passive Control of Structural Vibration in Base-Isolated Shear Structures  Hussein, R.  185-188  CN014995474  ASME Biennial  1995  Optimum Structural Vibration Control With Bounds on Control Forces  Bolonkin, A. A.; Veley, D. E.; Khot, N. S.  189-196  CN014995480  ASME Biennial  1995  Frequency Domain Approach to Solve the Time-Optimal Control of a Distributed Parameter System  Alli, H.; Singh, T.  197-206  CN014995495  ASME Biennial  1995  Active Mode Localization in Distributed Parameter Systems With Consideration of Limited Actuator Placement  Shelley, F. J.; Clark, W. W.  207-214  CN014995502  ASME Biennial  1995  Robustness of Natural Controls of Distributed-Parameter Systems  Jai Hyuk Hwang; Doo Man Kim; Kyoung Ho Lim  215-226  CN014995518  ASME Biennial  1995  Spherical Complaint Model for Vibration Estimation and Control  Thompson, T. J.  227-238  CN014995523  ASME Biennial  1995  Active Vibration Quenching Using Inverse Dynamics  Trautt, T. A.; Bayo, E.  239-246  CN014995539  ASME Biennial  1995  The Method of Successive Decrease and the Concept of Harmonic Wave Filter in Structural Wave Control  Wang, D.; Wang, Q.; Leung, A. Y. T.  247-254  CN014995544  ASME Biennial  1995  Two-Time Scale Control of Flexible Structures  Chen, L.; Xi, Y.; Zhang, Z.  255-260  CN014995550  ASME Biennial  1995  Hybrid Vibration Control of a Cable-Stayed Bridge  Bell, M.; Shoureshi, R. A.  261-272  CN014995565  ASME Biennial  1995  Passenger Ride Comfort Through Observer Based Control  Taghirad, H. D.; Esmailzadeh, E.  273-280  CN014995570  ASME Biennial  1995  A Pointwise Approach for Synthesizing Semi-Active Vehicle Suspensions  Chang, P.-M.; Jayasuriya, S.  281-288  CN014995586  ASME Biennial  1995  Tuning of a Rear Electronic Control Engine Mount  Galvin, D. D.  289-296  CN014995591  ASME Biennial  1995  Control of a Slewing Motor-Beam System With Coulomb Friction  Crassidis, A. L.; Mayne, R. W.  297-306  CN014995609  ASME Biennial  1995  Dynamic Stability Analysis for Multi-Flute End Milling  Shorr, M. J.; Liang, S. Y.  307-316  CN014995614  ASME Biennial  1995  Complete Balancing of Multicylinder Engines Without Requiring Harmonic Balancers  Bagci, C.  317-324  CN014995620  ASME Biennial  1995  Bode Integral Constraints and the Zero Spillover Controller in Active Noise and Vibration Control  Hong, J.; Bernstein, D. S.  325-332  CN014995635  ASME Biennial  1995  Remarks on the Modelling of Active Structures With Colocated Piezoelectric Actuators and Sensors  Loix, N.; Preumont, A.  335-340  CN014995640  ASME Biennial  1995  System Identification of Torsionally-Coupled Structures  Lin, C.-C.; Ueng, J.-M.; Lin, P.-L.  341-350  CN014995656  ASME Biennial  1995  Identification of Inertial Properties for Resiliently Supported Mechanical System  Nakamura, M.; Sawanobori, T.; Nagamatsu, A.  351-358  CN014995661  ASME Biennial  1995  The Modeling and Active Control of Flexible Plate Structure for Reducing Noise Radiation  Seto, K.; Miyata, T.; Ren, M.; Doi, F.  359-368  CN014995677  ASME Biennial  1995  Rigid and Flexible Body Modeling for a Triaxial Shaker Control System  Dougherty, J. J.; El-Sherief, H.; Nguyen, T.  369-374  CN014995682  ASME Biennial  1995  Development of V-Shaped Hybrid Mass Damper and Its Application to High-Rise Buildings  Imazeki, M.; Tanida, K.; Mutaguchi, M.; Koike, Y.  375-382  CN014995698  ASME Biennial  1995  Hydraulic Actuator Tuning in the Control of a Rotating Flexible Beam Mechanism  Panza, M. J.; Mayne, R. W.  383-392  CN014995705  ASME Biennial  1995  Vibration Control Method and Adaptability for Flexible Structures With Distributed Parameters Using a Hybrid Dynamic Absorber  Seto, K.; Kondo, S.; Ezure, K.  393-400  CN014995710  ASME Biennial  1995  Hybrid Feedback-Feedforward Control for Vibration Suppression  De Man, P.; Preumont, A.  401-406  CN014995726  ASME Biennial  1995  Active Vibration Control of Triple Flexible Structures Combined With Actuators  Seto, K.; Toba, Y.; Doi, F.  407-416  CN014995731  ASME Biennial  1995  Vibration Control of the Piping System: A Method Using Feedback-Error Learning  Takita, Y.  417-424  CN014995747  ASME Biennial  1995  Vibration Control With Neural Network Dynamic Compensator  Shiotsuka, T.; Yoshida, K.; Nagamatsu, A.  425-432  CN014995752  ASME Biennial  1995  H{ Structural Controller Design Based on Absolute Acceleration Measurement  Yamada, N.; Nishitani, A.  433-438  CN014995768  ASME Biennial  1995  Nonstationary Robust Positioning Control of Flexible Structures  Hara, S.; Yoshida, K.  439-448  CN014995773  ASME Biennial  1995  Sliding Mode Control for Flexible Structures With Control-Based Frequency-Shaping Hyperplane  Nonami, K.; Nishimura, H.  449-458  CN014995789  ASME Biennial  1995  A Design Method of Robust Controller for a Flexible Structure Using H/ Control Theory  Watanabe, T.; Yoshida, K.  459-466  CN014995794  ASME Biennial  1995  Optimal Design of a Truss Structure for a Segmented Reflector  Hahn, M. A.; Mirmirani, M. D.; Boussalis, H. R.  467-470  CN014995801  ASME Biennial  1995  An Optimal Design Method for Rubber Dynamic Vibration Absorber  Satoh, Y.; Misawa, H.  471-478  CN014995817  ASME Biennial  1995  Transient Response Analysis of Compressor-Piping Coupled System in Air Conditioning Units  Sawanobori, T.; Nakamura, M.; Nagamatsu, A.; Okamoto, J.  479-486  CN014995822  ASME Biennial  1995  Integrated Optimum Design of Structure and Control System by Modal Analysis  Kajiwara, I.; Tsujioka, K.; Nagamatsu, A.  487-494  CN014995838  ASME Biennial  1995  Vibration Control Using Combined Independent Modal Space Control and Fuzzy Logic  Asdigha, M.; Greif, R.  495-502  CN014995843  ASME Biennial  1995  Vibration Control of Moving Flexible Structure by Repetitive Control  Mitsuta, S.; Tsuji, H.; Itoh, H.; Ogasawara, Y.  503-510  CN014995859  ASME Biennial  1995  The Trajectory Tracking Control of 2-Link Flexible Arm Using Tendon Mechanism  Cao, H.; Yoshida, K.  511-518  CN014995864  ASME Biennial  1995  Dynamic Walk of a Quadruped Locomotion Robot Using Robust Optimal Tracking Control  Uchida, H.; Nonami, K.  521-528  CN014995870  ASME Biennial  1995  Experimental Verification of Time-Varying Impulse Shaping for a Two-Link Flexible Manipulator  Cho, J.-K.; Park, Y.-S.  529-536  CN014995885  ASME Biennial  1995  Stabilizing and Positioning Control of Inverted Flexible Pendulum by Means of H{ Servo Control With Partial-State Feedback  Nishimura, H.; Ohnuki, O.; Nonami, K.; Totani, T.  537-544  CN014995890  ASME Biennial  1995  Magnetically Induced Vibration in a 8-Pole, 9-Slot, Brushless DC Motor  Chuang, T. Y.; Lieu, D. K.  545-552  CN014995908  ASME Biennial  1995  Contact Impedance Sensors: Applicability for the Evaluation of Flexible Structures  Daugela, A.; Fujii, H.; Misaki, A.  553-560  CN014995913  ASME Biennial  1995  Electromagnetically Generated Acoustic Noise in DC Machines  Hwang, S.; Lieu, D. K.  561-570  CN014995929  ASME Biennial  1995  Development of Six Degrees of Freedom Vibration Isolation System for Microgravity Environment  Suzuki, T.; Tanida, K.; Tanji, A.; Okubo, K.  571-578  CN014995934  ASME Biennial  1995  New Control Algorithms for Semi-Active Dynamic Vibration Absorbers  Abe, M.; Igusa, T.  579-588  CN014995940  ASME Biennial  1995  Sensorless Active Suppression of Transverse Vibration of Flexible Plate  Matsuda, K.-I.; Okada, Y.  589-594  CN014995955  ASME Biennial  1995  Active and Regenerative Control of Electrodynamic Vibration Damper  Okada, Y.; Harada, H.  595-602  CN014995960  ASME Biennial  1995  Parametric Studies of Photo Deformation and Optical Actuation  Tzou, H. S.; Chou, C.-S.  603-610  CN014995976  ASME Biennial  1995  Response of Piezoelectric Solids to Unitary Impulsive Loads: A Computational Approach  Khutoryansky, N.; Sosa, H.  611-616  CN014995981  ASME Biennial  1995  Piezoelectric Actuation of von Karman Circular Plates With Thermal Deformation and Nonlinear Oscillation  Tzou, H. S.; Zhou, Y.-H.  617-626  CN014995997  ASME Biennial  1995  Optimum Design of Sandwich Panels With Piezoelectric and Shape Memory Alloy Actuators  Birman, V.; Simonyan, A.  627-638  CN014996002  ASME Biennial  1995  Design, Modeling and Fabrication of Micro-Robotic Actuators With Ionic Polymeric Gel and SMA Micro-Muscles  Shahinpoor, M.; Burmeister, M. W. J.; Hoffman, W.  639-648  CN014996018  ASME Biennial  1995  Simultaneous Use of Piezoelectric Ceramics as Sensor and Actuator For Through-Plate Sound Transmission Control  Akishita, S.; Aoyama, S.; Yokoi, K.; Ma, C. C. H.  649-656  CN014996023  ASME Biennial  1995  Optimum Structure/Control Design Using Multiobjective Optimization Techniques  Sunar, M.; Rao, S. S.  657-664  CN014996039  ASME Biennial  1995  Digital Optimal Multivariable Control of a Smart Structure Featuring Piezoelectric Sensors and Actuators  Sannah, M.; Smaili, A.; Lahdhiri, T.  665-674  CN014996044  ASME Biennial  1995  Finite Element Vibration Analysis of Composite Plates With Embedded Shape Memory Alloy Fibers at Elevated Temperatures  Zhong, Z. W.; Mei, C.  675-684  CN014996050  ASME Biennial  1995  Elasto-Plastic Analysis of Anisotropic Plates and Shells With Moderate Thickness by FEM  Zhong, W. F.; Huang, Y. Y.  685-690  CN014996065  ASME Biennial  1995  Active Constrained Layer Damping of Seismic Excitations  Baz, A.; Poh, S.  691-700  CN014996070  ASME Biennial  1995  Consideration of Both Extensional and Shear Strain of Core Material in Modal Property Estimation and Sandwich Plates  Lee, B.-C.; Kim, K.-J.  701-708  CN014996086  ASME Biennial  1995  Controlling the Vibration Levels of Vibrating Vanes Using Viscoelastic Materials  Oyadiji, S. O.; Tomlinson, G. R.  709-718  CN014996091  ASME Biennial  1995  Optimal Length of Constrained Layers on a Substrate With Linearly Varying Strain  Demoret, K. B.; Torvik, P. J.  719-726  CN014996109  ASME Biennial  1995  Interpretation of Active Dampers as Variable-Parameter Passive Devices  Anderson, E. H.  727-736  CN014996114  ASME Biennial  1995  An ER Long-Stroke Damper: Performance Modelling Under Quasi-Steady Conditions  Peel, D. J.; Stanway, R.; Sproston, J. L.; Bullough, W. A.  737-744  CN014996120  ASME Biennial  1995  Optimal Damping of Vibrations in Multibody Systems Through Equivalent Friction Control Laws  Dakev, N. V.; Chipperfield, A. J.; Fleming, P. J.  745-752  CN014996135  ASME Biennial  1995  Identification of a Significantly Non-Proportionally Damped Structure Using Force Appropriation  Holmes, P. S.; Wright, J. R.; Cooper, J. E.  753-760  CN014996140  ASME Biennial  1995  Reduction of Vibrations in Complex Structures With Viscoelastic Neutralizers: A Generalized Approach  De Espindola, J. J.; Bavastri, C. A.  761-766  CN014996156  ASME Biennial  1995  The Frequencies and Damping of a Cantilever Composite Plate With a Viscoelastic Layer  Cupial, P.; Niziol, J.  767-774  CN014996161  ASME Biennial  1995  The Method of Trajectories for Finding Eigenfrequencies of Damped Structures  Pesterev, A. V.; Tavrizov, G. A.  775-780  CN014996177  ASME Biennial  1995  Transient and Steady-State Response of Constrained Translating Strings  Zhu, W. D.; Mote, C. D.  783-794  CN014996182  ASME Biennial  1995  The Efficacy of the Momentum Balance Method in Transverse Impact Problems  Yigit, A. S.; Christoforou, A. P.  795-804  CN014996198  ASME Biennial  1995  Dynamic Analysis of the Axially Moving String Based on Wave Propagation  Ying, S.; Tan, C. A.  805-814  CN014996205  ASME Biennial  1995  Existence of Periodic Solution for Equation of Motion of Simple Beams With Harmonically Variable Length  Esmailzadeh, E.; Nakhaie-Jazar, G.; Mehri, B.  815-822  CN014996210  ASME Biennial  1995  Exact Perturbation for the Vibration of Almost Annular or Circular Plates  Parker, R. G.; Mote, C. D.  823-834  CN014996226  ASME Biennial  1995  Orthogonal Bases for Eigenvalue Sensitivities: Torsional Vibration  Nayfeh, S. A.; Asada, H.  835-838  CN014996231  ASME Biennial  1995  Split Vibration Modes in Acoustically-Coupled Disk Stacks  Tseng, J.-G.; Wickert, J.  839-846  CN014996247  ASME Biennial  1995  Green's Function Synthesis for Layered Distributed Parameter Systems  Lueschen, G. G. G.; Bergman, L. A.  847-854  CN014996252  ASME Biennial  1995  On the Analysis and Fundamental Frequency of Slightly Curved Sandwich Beams With a Delamination  Rossettos, J. N.  855-861  CN014996268  ASME Biennial  1995  Distributed Transfer Function Analysis of Ring-Stiffened Cylindrical Shells  Zhou, J.; Yang, B.  861-868  CN014996273  ASME Biennial  1995  Effects of the Electromagnetic Forces on Vibrational Behavior of the Laminated Mechanical Structure of Stator Cores  Ozturk, C.  869-878  CN014996289  ASME Biennial  1995  Analysis of the Equations of Linear Controlled Structures  Ma, F.; Lee, W. C.  879-884  CN014996294  ASME Biennial  1995  On the Number of Modes Required to Observe Forces in Flexible Structures  Marangoni, R. D.  885-894  CN014996301  ASME Biennial  1995  Prediction of Rotating Machinery Vibration Using Balance Simulation With Measurement Uncertainty  Andrews, R. P.  895-900  CN014996317  ASME Biennial  1995  Regularization of Some One-Dimensional Inverse Problems for Identification of Nonlinear Surface Phenomena  Groetsch, C. W.; Hanke, M.  903-908  CN014996322  ASME Biennial  1995  The Landweber Iteration for an Inverse Scattering Problem  Hanke, M.; Hettlich, F.; Scherzer, O.  909-916  CN014996338  ASME Biennial  1995  Efficient Numerical Solution of Inverse Heat Conduction Problems  Reinhardt, H.-J.; Dinh Nho Hao  917-922  CN014996343  ASME Biennial  1995  Direct and Inverse Wave Propagation in the Frequency Domain via the Weyl Operator Symbol Calculus  Fishman, L.  923-930  CN014996359  ASME Biennial  1995  Applications of Electrical Impedance Tomography to Nondestructive Evaluation  Santosa, F.  931-938  CN014996364  ASME Biennial  1995  Least Squares Estimation of Hydraulic Conductivity From Field Data  Bailey, K. R.; Fitzpatrick, B. G.; Jeffris, M. A.  939-946  CN014996370  ASME Biennial  1995  An Operator-Adjoint Approach to Electrical Impedance Tomography  Wade, J. G.  947-954  CN014996385  ASME Biennial  1995  On the Local Regularization of Inverse Problems of Volterra Type  Lamm, P. K.  955-962  CN014996390  ASME Biennial  1995  Parameter Estimation for an Imperfectly Clamped Plate: Numerical Examples  Banks, H. T.; Smith, R. C.; Wang, Y.  963-972  CN014996408  ASME Biennial  1995  Identification of Forces in Vibrating Plates by Pointwise and Line Observations: Uniqueness and Stability  Yamamoto, M.  973-978  CN014996413  ASME Biennial  1995  Determination of Modal Residues and Residual Flexibility for Time-Domain System Realization  Alvin, K. F.; Peterson, L. D.  979-986  CN014996429  ASME Biennial  1995  Elastic Impedance Tomography  Nakamura, G.; Uhlmann, G.  987-992  CN014996434  ASME Biennial  1995  Parameter Estimation of Flexible One-Link Manipulator Using B-Spline Approximations  Kojima, F.  993-998  CN014996440  ASME Biennial  1995  Convergence and Large Division in a Bayesian Approach to Functional Estimation Problems  Fitzpatrick, B. G.; Yin, G.  999-1004  CN014996455  ASME Biennial  1995  A Bounded Variation Approach to Inverse Interferometry  Pitzpatrick, B. G.; Keeling, S. L.; Rock, S. G.  1005-1008  CN014996460  ASME Biennial  1995  Fast Total Variation-Based Image Reconstruction  Vogel, C. R.; Oman, M. E.  1009-1016  CN014996476  ASME Biennial  1995  Nonsmooth Optimization Method for Image Resoration  Ito, K.; Kunisch, K.  1017-1022  CN014996481  ASME Biennial  1995  Stability and Resolution in Thermal Imaging  Bryan, K.; Caudill, L. F.  1023-1032  CN014996497  ASME Biennial  1995  Estimating the Interaction Kernel in a Mathematical Model for a Beam With Internal Damping Mechanism  Lin, T.; Russell, D. L.  1033-1042  CN014996504  ASME Biennial  1995  One Line Estimation of Stiffness in Nonlinear Beam Models With Piezoceramic Actuators  Demetriou, M. A.; Fitzpatrick, B. G.  1043-1050  CN014996510  ASME Biennial  1995  Identification of the Polyharmonic Vibration From Combination With a Normal Random Noise by the Use of High-Order Moments of Instantaneous-Value Distribution  Steinfwolf, A.  1051-1060  CN014996525  ASME Biennial  1995  Identification of Parameters in Hereditary Systems  Hartung, F.; Turi, J.; Herdman, T. L.  1061-1066  CN014996530  ASME Biennial  1995  A Numerical Algorithm for Determining a Coefficient in an Elliptic Equation  Lowe, B. D.; Rundell, W. R.  1067-1072  CN014996546  ASME Biennial  1995  Identification of Thermal and Hysteretic Response of SMA Embedded Flexible Rods  Kurdila, A. J.; Webb, G.  1073-1082  CN014996551  ASME Biennial  1995  An Optimization Based Approach to Flow Matching for Burger's Equation With a Forcing Term  Herdman, T. L.; Kang, K.  1083-1086  CN014996567  ASME Biennial  1995  A Symmetric Positive Definite Inverse Vibration Problem With Underdamped Modes  Starek, L.; Inman, D. J.; Pilkey, D. F.  1089-1094  CN014996572  ASME Biennial  1995  Computer Simulation for Active Control of Vibration in Beam Structures  Tanaka, M.; Matsumoto, T.; Huang, L.  1095-1102  CN014996588  ASME Biennial  1995  The Treatment of Systematic Errors in Model Updating  Frishwell, M. I.; Mottershead, J. E.; Zhang, Y.  1103-1110  CN014996593  ASME Biennial  1995  An Efficient Approximated Algorithm for Balancing and Order Reduction of Lightly Damped Systems  Halevi, Y.  1111-1118  CN014996600  ASME Biennial  1995  Identification of Vehicle-Bridge Interactive Forces From Measured Bridge Responses: Theoretical Studies  Law, S. S.; Chan, T. H. T.; Zeng, Q. H.  1119-1126  CN014996616  ASME Biennial  1995  Experimental Identification of Structural Damage by Neural Networks  Ceravolo, R.; De Stefano, A.; Grosjacques, M.; Sabia, D.  1127-1134  CN014996621  ASME Biennial  1995  On the Inverse Multiplicative Eigenvalue Problem With an Engineering Application  Sivan, D. D.; Ram, Y. M.  1135-1142  CN014996637  ASME Biennial  1995  Model Verification and Validation in Engineering: Updating of Mathematical Models by the Use of Test Data  Guenter Natke, H.  1145-1156  CN014996642  ASME Biennial  1995  New Approaches for Identifying Structural Models  Cogan, S.; Lallement, G.; Sanseigne, L.  1157-1162  CN014996658  ASME Biennial  1997  Unified approach of active panel vibration and flutter controls using piezoelectric actuation and iterative root locus method  Ming T. Ho, Kulicke & Soffa Industries, Inc., Roger R. Chen, Old Dominion University, Li C. Chu, C&C Technologies, Inc.    DETC97/VIB-3780  ASME Biennial  1997  Robust passive-active mounts for machinery and equipment  J. Hannsen Su, Naval Surface Warfare Center    DETC97/VIB-3774  ASME Biennial  1997  Vibration control of a distributed axially moving string using two actuators  M. S. de Queiroz, D. M. Dawson, Chris D. Rahn, F. Zhang, Clemson University    DETC97/VIB-3781  ASME Biennial  1997  Characteristics of Enhanced Active Constrained Layer Damping Treatments With Edge Elements: Part I: Finite Element Model Development and Validation  W. H., Liao, Kon-Well, Wang, The Pennsylvania State University    DETC97/VIB-3778  ASME Biennial  1997  Characteristics of Enhanced Active Constrained Layer Damping Treatments With Edge Elements: Part II — System Analysis  W. H., Liao, Kon-Well, Wang, The Pennsylvania State University    DETC97/VIB-4172  ASME Biennial  1997  Revisiting Hrovat's semi-active tuned mass damper  Jeffrey L., Kuehn, Gregory D., Brock, William N., Patten, University of Oklahoma    DETC97/VIB-3786  ASME Biennial  1997  Experimental performance of a MR fluid damper  Dan, Kroushl, Amy, Nesbit, Jin Kyoo, Lee, Roy D., Marangoni, William W., Clark, Darrin, Schwartz, Pradeep P., PhulÈ, University of Pittsburgh    DETC97/VIB-3776  ASME Biennial  1997  Semi-active modal response control approach for linear mechanical and structural systems  Jeffrey Hayen, Southwestern Oregon Community College    DETC97/VIB-3782  ASME Biennial  1997  Reduction of ship vibration by the dynamic absorber  Wen-Jeng Hsueh, National Taiwan University    DETC97/VIB-3787  ASME Biennial  1997  Adaptive LMS model-following control applied inside a closed loop  Bradley R., Smith, H.H., Robertshaw, Virginia Polytechnic Institute and State University    DETC97/VIB-3783  ASME Biennial  1997  Robust tracking for uncertain flexible structures using mixed time-optimal and sliding mode control  Nader Jalili, Nejat Olgac, University of Connecticut    DETC97/VIB-3777  ASME Biennial  1997  A neural network design methodology for structural control  G. S. Lee, Shih-Ming Yang, National Cheng Kung University    DETC97/VIB-3775  ASME Biennial  1997  Performance comparison between vibration control by confinement and conventional control  Daryoush Allaei, QRDC    DETC97/VIB-3785  ASME Biennial  1997  Analytical Investigation on elastodynamic vibration suppression of a flexible four-bar mechanism system featuring a smart coupler link and multivariable optimal regulator  Muhammad Sannah, JLG Industries, Inc., Ahmad Smaili, Tennessee Technological University    DETC97/VIB-3779  ASME Biennial  1997  Microdynamic model and control of a hub-appendage type system  Chen Hsieh, Jong-Ching Lin, National Cheng Kung University    DETC97/VIB-3784  ASME Biennial  1997  Passive vibration and noise control of a fuselage with the floor effect  Yii-Mei Huang, KuoWen Dai, National Central University    DETC97/VIB-3788  ASME Biennial  1997  Mathematical model of a buckled spring applied for vehicle active suspension  Shiping Yao, Colin Morgan, Nigel J. Leighton, Wolverhampton University    DETC97/VIB-4160  ASME Biennial  1997  Adaptive Noise Cancellation in an Acoustic Duct  Foued Ben-Amara, Pierre T. Kabamba, A. Galip Ulsoy, The University of Michigan    DETC97/VIB-3794  ASME Biennial  1997  Spatial Characteristics of Acoustic Boundary Control for Interior Noise Suppression  S. M. Hirsch, Jian Qiao Sun, University of Delaware    DETC97/VIB-3792  ASME Biennial  1997  Impedance Characteristics of Structural Acoustic Control  J. Qiao, University of Delaware    DETC97/VIB-3791  ASME Biennial  1997  Actively Silencing a Cavity by Acoustic Impedance Changes  Oliver Lacour, D. Thenail, M. A. Galland, Ecole Centrale de Lyon    DETC97/VIB-3795  ASME Biennial  1997  Minimization of Radiated Sound Power from Vibrating Shells by Optimal Placement of Lumped Masses  Ashok D. Belegundu, G. H. Koopmann, E. W. Constans, The Pennsylvania State University    DETC97/VIB-3798  ASME Biennial  1997  Surface Topography and Noise Emission In Gearboxes  Naser Amini, B. G. RosÈn, Chalmers University of Technology    DETC97/VIB-3790  ASME Biennial  1997  Optimization of Noise and Vibration of a Cylindrical Cam Mechanism Using Inertial Compensation Techniques  Song-Lin Ge, Universita di Firenze    DETC97/VIB-3789  ASME Biennial  1997  Quantitative Identification of Vehicle Rattle Sources Using CAE and Experimental Tools  Jen Her, Shang-Rou Hsieh, Ford Motor Company, J.A. Moore, Noise and Vibration Consultant    DETC97/VIB-3797  ASME Biennial  1997  Acoustic Double Holography Method and its Application to Engine Noise Research  Mitsuo Nakano, Isuzu Advanced Engineering Center, Ltd., Masao Nagamatsu, Kohei Suzuki, Takuya Yoshimura, Tokyo Metropolitan University    DETC97/VIB-3799  ASME Biennial  1997  Active Noise Control with the Active Muffler in Automotive Exhaust System  Jae-Eung Oh, Hanyang University    DETC97/VIB-3796  ASME Biennial  1997  Modeling and Feedback Control of Flexible Plate with Focus on the Modes Highly Coupled to Radiation Field  M. Z. Ren, K. Seto and F. Doi    DETC97/VIB-3811  ASME Biennial  1997  Sliding Mode Control with Pre-filter for Spillover and Chattering Suppression  T. Ito and K. Nonami    DETC97/VIB-3812  ASME Biennial  1997  Solving Vibration Control Problems using Reduced Order Models for Flexible Structures - A Genetic Algorithm approach.  S. Kundu, K. Kamagata, S. Sugino, T. Minowa, and K. Seto    DETC97/VIB-3817  ASME Biennial  1997  LMI Based Controller Design for a Bridge Tower under Construction  I. N. Kar, K. Seto and F. Doi    DETC97/VIB-3810  ASME Biennial  1997  Fuzzy Changing Stiffness Control of the Unstable Vibration of a Centrifuge Rotor  Y. Yuan, S.Y. Liu and B.C. Wen    DETC97/VIB-3813  ASME Biennial  1997  Order Reduction of Controller Based on LMIs Improving Error Bound  R. Saragih and K. Yoshida    DETC97/VIB-3819  ASME Biennial  1997  Fuzzy Logic Control of Time Periodic Mechanical Systems  D. Boghiu, S.C Sinha and D.B. Marghitu    DETC97/VIB-3830  ASME Biennial  1997  Self-Compensating Control for Suppression of Rotational Speed Variation Excited by Reduction Gear Mechanism  M. Itoh, S. Kasei and S. Fukuda    DETC97/VIB-3801  ASME Biennial  1997  Tunable Torsional Vibration Absorber: The Centrifugal Delayed Resonator  M. Hosek, H. Elmali and N. Olgac    DETC97/VIB-3829  ASME Biennial  1997  Regenerative Damper with an Optimally Tuned Resonant Circuit  Y. Okada, J. Yonemura and M. Shibata    DETC97/VIB-3804  ASME Biennial  1997  Virtual Auxiliary Mass as Hybridization Effects of Dynamic Vibration Absorber  O. Nishihara, M. Yasuda and H. Matsuhisa    DETC97/VIB-3807  ASME Biennial  1997  Application of Dynamic Vibration Absorbers to Mass Measurement  T. Mizuno    DETC97/VIB-3803  ASME Biennial  1997  Control Performance of Hadamard Weighted H2 Controller for Multiple-Input Structure System  T. Watanabe    DETC97/VIB-3818  ASME Biennial  1997  High Performance Damping with a Semi-Active Spring  James E. Bobrow    DETC97/VIB-3826  ASME Biennial  1997  Active Vibration Isolation Control for A Multi-Degree-Of-Freedom Structure with Uncertainties of Its Base  H. Nishimura and A. Kojima    DETC97/VIB-3800  ASME Biennial  1997  Vibration Reduction and Isolation by ON-OFF Control of Friction Force at Spring Support  H. Yamaguchi, M. Yashima and Y. Hirayama    DETC97/VIB-3802  ASME Biennial  1997  On an Improvement of Hybrid Vibration Isolation System  K. Mizutani, Y. Fujita and R. Ikeura    DETC97/VIB-3805  ASME Biennial  1997  Semi-Active Vibration Isolation Control Using Feedforward Information of Disturbance  S. Yoshida and K. Yoshida    DETC97/VIB-3820  ASME Biennial  1997  Vibration Control of a Self-Standing Quadrupedal Robot with YT-Mechanisms for Stable  Yoshihiro Takita    DETC97/VIB-3806  ASME Biennial  1997  Self-motion Utilization for Reducing Vibration of Structurally Flexible Redundant Robot Manipulators  S. J. Kim and Y. S. Park    DETC97/VIB-4130  ASME Biennial  1997  Actuator Selection for Vibration Control with Control Energy Constraints  H. Doki, K. Hiramoto and R. E. Skelton    DETC97/VIB-3832  ASME Biennial  1997  Modeling and Active Vibration Control with Robustness for Bridge Tower Structures under Construction  K. Seto, F. Doi and M. Ren    DETC97/VIB-3808  ASME Biennial  1997  Structural Vibration Control for Bridge Towers and Its Effect under Wind Excitation using a Wind Tunnel  F. Doi, K. Seto, Y. Gatade and M. Ren    DETC97/VIB-3809  ASME Biennial  1997  Active Vibration Control of Bridge Tower under Construction  T. Tamaki, H. Kagaya, F. Sasaki, K. Ogawa, Y. Nishi, M. Sasaki and K. Yamaguchi    DETC97/VIB-3822  ASME Biennial  1997  Analytical studies of shape memory alloy dampers for structural control of base isolated bridges  Krzysztof Wilde, Paolo Gardoni and Yozo Fujino    DETC97/VIB-3824  ASME Biennial  1997  A Semi-Active Modal Response Control Approach for Linear Mechanical or Structural Systems  J.C. Hayen and W.D. Iwan    DETC97/VIB-3827  ASME Biennial  1997  Vibration Control by Active Tuned Liquid Damper using Magnetic Fluid  M. Abe, Y. Fujino and Y. Sano    DETC97/VIB-3825  ASME Biennial  1997  Self-Regulating Variable Oil Damper for Structural Response Control  H. Kurino and T. Kobori    DETC97/VIB-3815  ASME Biennial  1997  Seismic Response Reduction Using Magnetorheological Dampers  B.F. Spencer, Jr., S.J. Dyke, M.K. Sain and J.D. Carlson    DETC97/VIB-3828  ASME Biennial  1997  Development and Testing of Variable Gain Control Algorithms for Seismic Response Control of a Full-Scale Frame Structure  Hirokazu Iemura, Akira Igarashi, Yutaka Inoue and Mitsuo Sakamoto    DETC97/VIB-3823  ASME Biennial  1997  Development of an Active Mass Damper for Stabilizing the Load Suspended on a Floating Crane  I. Iwasaki, K. Tanida, S. Kaji, M. Mutaguchi and T. Murata    DETC97/VIB-3816  ASME Biennial  1997  A Method for Large Scale Structural-Acoustic Analysis  Koki Shiohata, K. Nemoto, Hitachi, Limited, T. Iwatsubo, Kobe University    DETC97/VIB-3834  ASME Biennial  1997  Computational Issues in Damping Identification for Large Scale Problems  Deborah F. Pilkey, Virginia Tech, Kevin P. Roe, Institute of Computer Applications in Science & Engineering, Daniel J. Inman, Virginia Tech    DETC97/VIB-3835  ASME Biennial  1997  Efficient Structural Acoustic Analysis Using Finite and Infinite Elements and Parallel Processing Architectures  Stewart W. Moore, Henno Allik, BBN Systems and Technologies    DETC97/VIB-3836  ASME Biennial  1997  Computation of Nonlinear Response of Hydraulically Actuated Structures  D. Burton, Texas Tech University, P. Baker, Y. Lew, Battelle Pacific Northwest Laboratories    DETC97/VIB-3837  ASME Biennial  1997  Comparison of Refined Beam Theory and FEM for Piezo-Actuated Structures  Wolfgang E. Seemann, Kai Wolf, Peter Hagedorn, Darmstadt University of Technology    DETC97/VIB-3838  ASME Biennial  1997  Thickness-Optimization of Piezoceramic Transducers for Energy Transfer  Kai Wolf, Stephan Frese, Peter Hagedorn, Wolfgang Seemann, Darmstadt University of Technology    DETC97/VIB-3839  ASME Biennial  1997  Finite Element Methods for the Radiation of Ultrasonic Phased Arrays Into an Acoustic Medium  Karl Grosh, John M. Dodson, Yuan Lin, University of Michigan    DETC97/VIB-3840  ASME Biennial  1997  Implementation of Non-Reflecting Boundaries in a Space-Time Finite Element Method for Structural Acoustics  Lonny L. Thompson, Clemson University    DETC97/VIB-3841  ASME Biennial  1997  Nonlinear Wave Propagation in Elastic Submerged Cables  M. Behbahani-Nejad, Noel C. Perkins, University of Michigan    DETC97/VIB-3842   ASME Biennial  1997  Closed Form Transient Response of One-Dimensional Continua  Xuqiang Wu, Bingen Yang, University of Southern California    DETC97/VIB-3843  ASME Biennial  1997  An Analysis of a Friction Damped System Using Two Component Mode Methods  E. Pesheck, Christophe Pierre, University of Michigan    DETC97/VIB-3844  ASME Biennial  1997  Analysis of Dynamic Force Between Teeth Walls in Scroll Compressors by Elastic Contact Modelling  Takayuki Suzuki, Kazuhiro Sato, Mitsubishi Heavy Industries, Ltd.    DETC97/VIB3845  ASME Biennial  1997  Two-Dimensional Gas Pulsation Modeling of Thin Shell Type Gas Cavities With Special Attention to Active Pulsation Cancellation  Peter C.-C. Lai, Copeland Corp., Werner Soedel, Purdue University    DETC97/VIB-3847  ASME Biennial  1997  Analysis of Acoustical Properties of a Gear Mechanism  Evgueni I. Podzharov, University of Panamericana    DETC97/VIB-3848  ASME Biennial  1997  Experimental and Numerical Studies of Friction-Induced Oscillations of a Pin-on-Disk Apparatus  W. Tworzydlo and O.N. Hamzeh, The Computational Mechanics Company, Inc., W. Zaton and Tom Judek, ORTECH Corporation, Heather Loftus, Ford Motor Company    DETC97/VIB-3903  ASME Biennial  1997  Friction Induced Vibrations: Experiments  Modelling and Analysis, Nikolaus Hinrichs, Marcus Oestreich, and Karl Popp, University of Hannover    DETC97/VIB-3908  ASME Biennial  1997  Periodic Response of Front End Accessory Drives with Dry Friction  M.J. Leamy and Noel Perkins, University of Michigan    DETC97/VIB-3912  ASME Biennial  1997  Analysis of Stick-Slip Motion in Coulomb Damped Systems Using Variable Structure System Theory  Aldo Ferri and Bonnie S. Heck, Georgia Tech    DETC97/VIB-3915  ASME Biennial  1997  Phase Space Interpretation and Stability Analysis of a Self Excited  Friction Damped Turbine Airfoil, E. Pesheck, and Christophe Pierre, University of Michigan    DETC97/VIB-3913  ASME Biennial  1997  Effect of Dynamic Shear Force on Fastener Loosening in Assemblies  Yubo Dong and Daniel Hess, University of South Florida    DETC97/VIB-3904  ASME Biennial  1997  Periodic Optimal Control of Dampers  Prakash S. Kasturi and Pierre E. Dupont, Boston University    DETC97/VIB-3910  ASME Biennial  1997  Analytical and Experimental Investigation of an Impact Oscillator  M. Oestreich, N. Hinrichs, and K. Popp, University of Hannover, and C.J. Budd, University of Bath    DETC97/VIB-3907  ASME Biennial  1997  Dynamic Analysis of Nonlinear Rotor Systems Using Floquet Methods  Dan Marghitu and George T. Flowers, Auburn University    DETC97/VIB-3909  ASME Biennial  1997  Micro-Scale Simulation of Adhesive Effects During Normal Impact  Jeffrey Streator, Georgia Tech    DETC97/VIB-3914  ASME Biennial  1997  In-Plane Stick-Slip Vibration on the Surface of a Flexible Disc Clamped Between Elastic Sliders  H. Ouyang and J.E. Mottershead, University of Liverpool, M.P. Cartmell, University of Edinburgh, M.I. Friswell, University of Wales    DETC97/VIB-3906  ASME Biennial  1997  Dynamics of a Vibratory Feeder  Peter Wolfsteiner and Friedrich Pfeiffer, TU- Munchen    DETC97/VIB-3905  ASME Biennial  1997  Optimization of Noise and Vibration of a Cylindrical Cam Mechanism Using Inertial Compensation Techniques  Song-Lin Ge, G. Nerli, and M. Carfagni, Universita di Firenze    DETC97/VIB-3911  ASME Biennial  1997  Vibroacoustic Source Identification  From Measured Structure Response and Resolution of the Inverse Problem, Charles H. Pezerat, INSA    DETC97/VIB-3917  ASME Biennial  1997  Influence of Internal Structures of High Modal Density on the Shell's Radiation  Lionel Oddo, INSA    DETC97/VIB-3916  ASME Biennial  1997  Applications of the Causality Condition to Acoustic Reflections  J. Gregory McDaniel, Boston University    DETC97/VIB-4133  ASME Biennial  1997  Acoustic radiation modes on a partially excited surface  Pei-Tai Chen, National Taiwan Ocean University    DETC97/VIB-3918  ASME Biennial  1997  Modified Geometrical Acoustics Behavior Exhibited by Computations for Hemi-Capped Cylinders in the Mid-Frequency Range