IFToMM Papers Conference Year Paper Title Paper Author Page Number Other IFToMM  1982  1.1 Vibratory Problems on Gas Turbine Rotors  G. Sacchi and B. Moro  7    IFToMM  1982  1.2 Analysis of Turbogenerator Operation Defects on the Basis of Their Vibratory Behaviour  A. Benanti, C. Frigeri, A. Macchi, T. Rossini and M. Marinelli  17    IFToMM  1982  1.3 Investigation into Output Dependent Rotordynamic Instability of the High Pressure Rotor on a Large Turbogenerator  S.H. Greathead and M. Slocombe  27    IFToMM  1982  1.4 Double Frequency Vibration in Large Turbogenerator Rotors a Design Problem  W. Kellenberger and P. Rihak  37    IFToMM  1982  1.5 Some Results on the Twice per Revolution Balancing of Generators  N. Bachschmid and C. Frigeri  49    IFToMM  1982  1.6 Rotor-Support Parametric Instability Limits in Terms of Rotor Receptances in Rotating Axes  J.M. Krodkiewski and Z.A. Parszewski  55    IFToMM  1982  1.7 Parametric Resonance in a Gyroscopic Rotor Driven through Hooke's loint Mechanism  D. Ardayfio  67    IFToMM  1982  1.8 Economic Solutions of Rotordynamics Problems  M. Balda  71    IFToMM  1982  1.9 Quasi Modal Nonlinear Analysis for Seismic Response in Pump Rotors  M. Kaga, K. Kikuchi, O. Matsushita, M. Takagi and M. Furudono  83    IFToMM  1982  1.10 Modal Parameter Identification and Sensityvity Analysis in Rotating Machinery  R. Nordmann  95    IFToMM  1982  1.11 Sensitivity of The Eigenvalues of Rotors to Parameter Modifications  c.P. Fritzen and R. Nordmann  103    IFToMM  1982  1.12 Potential Of Transfer Function Control of Rotor Whip and Balance  J. Mahig  111    IFToMM  1982  1.13 Studies of Non-Linear Vibrations and the Stability of an Unbalanced Rotor with a Cavity Partially Filled with Viscous Fluid  V.A. Djoldasbekov, E.R. Rakhimovand A.S. Rakhmatullaev  117    IFToMM  1982  2.1 Rotor Dynamics of Non Symmetrical Rotor-Bearing-Frame Systems  H. Alberg  123    IFToMM  1982  2.2 Dynamic Interacting Response of Large Turbine-Generators Supported on Foundations of Different Flexibilities  I.K. Aneja  129    IFToMM  1982  2.3 Fan-Foundation Interaction - A Computerized Solution  H. Ming Chen, V. Sgroi and S.B. Malanovsky  139    IFToMM  1982  2.4 Dynamic Analysis ofa 660 MWTurbogenerator Foundation  N. Bachschmid, R. Bernanteand C. Frigeri  151    IFToMM  1982  2.5 Development of an Impact Exciter for Large Structures and Results of a First Application  K. Schollhorn  163    IFToMM  1982  2.6 Modal Resolution of Transient Vibrations in Rotor-Bearing-Foundation Systems Caused by Electrical System Faults  T. Jainski  177    IFToMM  1982  2.7 A Parametric Analysis for Vibrating Machine Foundations  G.c. Beolchini  191    IFToMM  1982  2.8 A Method for Evaluting the Sensitivity of a Turbo-Generator Shaft Line Vibrational Behaviour to Changes in Bearing Coefficients  I. W. Mayes and W.G.R. Davies  203    IFToMM  1982  2.9 A Forced Vibration Method to Calculate the Oil Film Instability Threshold or Rotor-Foundation Systems  G. Diana, E. Massa, B. Pizzigoni and C. Marcantoni- Taddei  207    IFToMM  1982  3.1 Mistuned Bladed Disks-Dynamical Behaviour and Computattion  H. Irretierand KJ. Schmidt  215    IFToMM  1982  3.2 Vibration Analysis of Steam Turbine Pinned Root Control Stage Blades  A.J. Partington  227    IFToMM  1982  3.3 Vibrations of Blades with Damping Wire  M. Butkovic  237    IFToMM  1982  3.4 Effect of Packeting on Turbine Blades Vibrations  R. Bernante, A. Macchi and P. Magneschi  247    IFToMM  1982  3.5 Forced Vibrations on Rotating Pretwisted Blades  H.M. Jadvani and J.S. Rao  259    IFToMM  1982  3.6 Hydraulic Analogy for Non Ideal Compressible Gas Flow  J.S. Rao, V. V.R. Rao and V. Seshadri  267    IFToMM  1982  3.7 Blade Excitation Due to Gyroscopic Forces  F. Sisto, A. T. Chang and M. Sutcu  279    IFToMM  1982  4.1 Balancing Experiences on Large Electric Machinery for The Production of Electric Energy  A. Marchetti  285    IFToMM  1982  4.2 A Unified Approach to Balancing with Multiple Constraints  E.S. Zorzi, J.C. Giordano and G.C. Lee  297    IFToMM  1982  4.3 Comparison of Effectiveness of Several Balancing Methods for Flexible Rotors  Zhou Shixiang and N.F. Rieger  305    IFToMM  1982  4.4 Balancing of a Multi-Mass Flexible Rotor-Bearing System without Phase Measurements  E.J. Gunter, H. Springer and R.R. Humphris  317    IFToMM  1982  5.1 Condition Monitoring of Large Francis Turbines and Generators on Hydro Power Stations  J.R.F. Arruda, H.I. Weber and D.E. Zampieri  331    IFToMM  1982  5.2 An On-Line Computer System as an Aid to Solving Rotor Dynamic Problems  A. Curami, M. Gasparetto, V. Rognoni and F. Di Pasquantonio  337    IFToMM  1982  5.3 The Size of a Turbo-Generating Sets and Permissible Vibrations  A. Vucetic, M. Butkovic, I. Skrtic and C. Orcic  347    IFToMM  1982  6.1 Experimental Research on the Behaviour of Hydrodynamic Plain Seals by Means of a Specific Testing Device  M. Falco, G. Diana, G. Marenco, G. Mimmi and P. Saccenti  355    IFToMM  1982  6.2 Exciting Forces Due to Swirl-Typ Flow in Labyrinth Seals  L Hauck  361    IFToMM  1982  6.3 Rotordynamic Moment Coefficients for Finite-Length Turbulent Seals  D. Childs  371    IFToMM  1982  7.1 The Determination of Hydrodynamic Oil Film Forces by 1n-Situ Testing  R.H. Bannister and A.R. Tawfik  379    IFToMM  1982  7.2 1nfluence of Misalignment of Support Journal Bearings on Stability of Multi-Rotor Systems  T. Nasuda and Y. Hori  389    IFToMM  1982  7.3 Study of Some Effects of Hydrodynamic Bearings Non-Linear Behaviour on Rotating Machine Operations  A. Pons  397    IFToMM  1982  7.4 Non-Linear Effects in Tilting Pad Bearings  N. Abdul- Wahed, D. Nicolas and M.T. Pascal  407    IFToMM  1982  7.5 Operating Characteristics of Three-Lobe and Pressure Dam Bearings  R.D. Flack and P.E. Allaire  417    IFToMM  1982  8.1 Elastic Solution for Vibration Trouble on Vertical Pumps  G. Marenco and L Vergani  429    IFToMM  1982  8.2 Seismic Response of Vertical Shaft Pump 1ncluding 1nteraction between Shaft and Pipe  T. Shimogo, K. Yoshida and Y. Kazao  439    IFToMM  1982  8.3 Vibrations and Critical Speeds of Submersible Turbine Pumps  T. Chalko and K. Marynowski  449    IFToMM  1982  8.4 A Theoretical and Experimental 1nvestigation on the Dynamic Behaviour of an Axial Pump  N. Bachschmid, B. Pizzigoni, A. Chessa, C. Guzzo and A. Vallini  461    IFToMM  1982  8.5 Vibration Problems on Large Rotating Machinery: Some Cases Experienced in ENEL Power Stations  M. Cadeddu, C. Frigeri, E. Gadda and A. Clapis  469    IFToMM  1982  8.6 Analytical and Experimental Procedures for Rotordynamic Predictions during Development of New Turbomachines  E. Benvenuti and P. Lacitignola  479    IFToMM  1982  8.7 Vibration Phenomena in Boiler FeedPumps Originating from Fluid Forces  R.D. Brown  497    IFToMM  1982  9.1 Theoretical and Experimental Investigation of Shaft Vibrations in Turbomachinery Excited by Cracks  B. Grabowski and O. Mahrenholtz  507    IFToMM  1982  9.2 On the Vibration Behaviour of a Cracked Rotor  LR.K. Nilsson  515    IFToMM  1986  The Calculation of the Stiffness and Damping Coefficients of Turbine Journal Bearings Considering Variable Viscosity  H. Ott, G. Paradissiadis  1    IFToMM  1986  Analysis of Dynamic Characteristics for Cylindrical Journal Bearing Based on Average Flow Theory  K. Ono, S. Michimura, A. Tamura  7    IFToMM  1986  The Lubrication of Multiple Ring Journal Bearing  A.E. Yousif  15    IFToMM  1986  Dynamically Loaded Finite Length Journal Bearings with Bending of the Journal within the Bearing  A.J. Smalley  21    IFToMM  1986  Study on Dynamic Characteristics of Flexible Cylindrical Journal Bearing  K. Ono, S. Michimura  29    IFToMM  1986  A Study on the Dynamic Characteristics of Swing Pad Journal Bearings Applied to a Vertical Shaft  K. Iwamoto, Y. Hori  37    IFToMM  1986  A Study on the Hybrid Bearing Characteristics for Large Pumps  Y. Ozawa, H. Kanki, T. Kawakami  43    IFToMM  1986  A Study of Aerostatically Lubricated Bearings with Groove Compensation  G. Lin, T. Aoyama, I. Inasaki  49    IFToMM  1986  A Journal Bearing Test Rig for Temperature and Pressure Measurements with Results for an Offset Half Bearing  L.J. Read, R.D. Flack  55    IFToMM  1986  Application of Random Excitation Technique to Dynamic Characteristics Measurement of Bearing  C. Yasuda, H. Kanki, Y. Ozawa, T. Kawakami  61    IFToMM  1986  A Method of Identifying Bearing Dynamic Coefficients and Unbalances of Turbine Rotor  S.B. Xia, W.H. Huang, Z.G. Li  69    IFToMM  1986  A Site Test of the Dynamic Characteristics of Fluid Film Bearings on a Running Power Turbine Set  H. Gong, H. Chang, C. Chang, D. Jin, D. Jin  75    IFToMM  1986  The Singularity of the Riccati Transfer Matrix Method and a Method for Its Being Eliminated  Z. Wang  81    IFToMM  1986  A 3-Dimensional Approach to Dynamic Analysis of Rotating Shaft-Disk Flexible Systems  M. Geradin, N. Kill  87    IFToMM  1986  Development of a Geometrically Non-Linear Timoshenko Beam Model for Application in Rotor Dynamics  T.A.G. Heeren, A. de Kraker, M.T.M. Crooijimans, D.H. van Campen  95    IFToMM  1986  The Effect of Earth Rotation on the Dynamics of High-Speed Vertically Mounted Discs  M.N. Sahinkaya, C.R. Burrows  101    IFToMM  1986  Mechanics of Dynamically Tuned Gyro  D.M. Klimov  105    IFToMM  1986  The Role of Rigid Body Balancing for Flexible Shafts  A.G. Parkinson  109    IFToMM  1986  A Method for Calculating the Optimum Balance Corrections of Flexible Rotors  D. Jin, X. Tang  173    IFToMM  1986  Balancing of a Flexible Rotor with High Speed and the Related Measurement Technique  Y. Nie, H. Zhao  117    IFToMM  1986  Adaptively Computer Controlled Fully Automatic Balancing System  H. Kaliszer, M. Abdulwahab  123    IFToMM  1986  Dynamic Balancing of Hydroelectric Generating Sets  S.X. Jiang, Q.Y. Gong  129    IFToMM  1986  Field Balancing 70 MW Gas Turbine-Generators  E.J. Gunter, W.E. Gunter  135    IFToMM  1986  Computer Simulation of Torsional and Flexural Vibrations in Machinery  C. Troeder, A. Laschet  145    IFToMM  1986  A New Approach to Describe the Mechanical Performance of Flexible Couplings in Drive System  H. Peeken, C. Troeder, J. Benner, W. Platt  159    IFToMM  1986  High Speed Rolling Piston Rotary Compressor Development (Analysis on Bearing Load Caused by Unbalanced Force in Overhung Flexible Rotor System)  M. Kubo, N. Kawashima, H. Marumo  165    IFToMM  1986  Three Dimensional Stress Analysis on Rotor Shaft with Ribs under Dynamic Load  K. Sonoda, N. Yamashita, H. Kanzaki, T. Uchida, T. Murakami, K. Ishihara  171    IFToMM  1986  Composite Flywheel Optimization  A.P. Bessonov, M.Y. Ochan  177    IFToMM  1986  Balancing of Flexible Rotor by Modal Parameter Identification  Y. Kanemitsu  183    IFToMM  1986  Identification of the Modal Parameters by Perturbation Testing of a Rotor with Strong Gyroscopic Effect  D.E. Bently, A. Muszynska, A. Olas  189    IFToMM  1986  Measurement of Rotational Vibration of Gears Using Double Aperture Method  I. Hayashi, T. Hayashi, S. Ueha, T. Honda  195    IFToMM  1986  Algebraic Formulas for the Threshold and Mode of Instability and the First Critical Speed of a Simple Flexibly Supported (Overhung) Rotor-Bearing System  E.A. Muijderman  201    IFToMM  1986  Sub-Synchronous Limit Cycles for a Flexible Shaft in Lobed Hydrodynamic Bearings  R.D. Brown  211    IFToMM  1986  An Approximate Nonlinear Transient Analysis of Journal Bearing Response in Unstable Region of Linearized System  M. Malik, y. Hori  217    IFToMM  1986  Solving Nonsynchronous Vibration Problems of Large Rotating Machineries by Exciting Test in Actual Operating Condition  H. Kanki, H. Fujii, A. Hizume, T. Ichimura, T. Yamamoto  221    IFToMM  1986  Vibrational Characteristics of a Rotor Shaft of an Electric Motor for Downhole Pump  Y. Hori, T. Kato, Y. Nishimura, S. Konomoto  227    IFToMM  1986  Multiple Pad Pressure Dam Journal Bearings Analysis and Application to Vertical Machines  P.E. Allaire, T. Okita  233    IFToMM  1986  Machine Dynamics in Terms of the System Configuration Parameters  Z.A. Parszewski, J.M. Krodkiewski  239    IFToMM  1986  An Experimental Study of Squeeze Film Damper Bearing without Centralizing Spring  M. Tanaka, Y. Hori  245    IFToMM  1986  The Unbalance Responses of a Rigid Rotor Supported in Squeeze-Film Damper Bearings  J.K. Xu, S.Q. Chen  251    IFToMM  1986  Vibration Control Capability of Squeeze-Film Bearings  F. Kaya  257    IFToMM  1986  Rotor-Foundation (or Casing) Dynamics and Evaluation  T. Inagaki, K. Shiraki  263    IFToMM  1986  Experimental and Numerical Analysis on a Large Nuclear Steam Turbo-Generator Group  A. Pons  269    IFToMM  1986  The Disturbing Force and Moment Analysis and Dynamic Response Calculation for Die Forging Press-Elastic Foundation System  S. Liu, Y. Dai, S. Gu, W. Yao  277    IFToMM  1986  Dynamic Analysis of Press-Elastic Foundation System Using Component Mode Synthesis  S. Liu, S. Gu, Y. Dai  283    IFToMM  1986  Analytical and Experimental Investigations on Vibratory Stresses of a Rotating Steam Turbine Blade under NPF Excitation  J.S. Rao, K. Gupta, N.S. Vyas  289    IFToMM  1986  Transient Vibrations of Turbine Blades due to Passage through Partial Admission and Nozzle Excitation Resonances  H. Irretier  301    IFToMM  1986  Study on Aerodynamic Force Exciting Vibration of Turbine Rotor Blade  M. Tanaka, A. Takehira, K. Kuwata, A. Hoshino, H. Koike, K. Ishihara, T. Isozaki, H. Yamasaki  307    IFToMM  1986  Impeller Blade Vibration in Turbochargers  N. Nishiwaki, K. Kimura, S. Shiratori  313    IFToMM  1986  Startup Torsional Vibration of Rotating Machine Driven by Synchronous Motor  T. Iwatsubo, Y. Yamanoto, R. Kawai  319    IFToMM  1986  Torsional System Design Relative to Synchronous Motor Start-up with a Variable Frequency Power Supply System  P. deChoudhury  325    IFToMM  1986  Improvement of a Reduced Torsional Model by Means of Parameter Identification  P. Schwibinger, T. Feng, R. Nordmann  329    IFToMM  1986  Quick Predictions of Drive Conditions for Torsional Systems  B. Weyh  339    IFToMM  1986  Analysis of Single Rotor Turbines by Means of Torsional Waves  A. Mioduchowski, M.G. Faulkner  345    IFToMM  1986  Noise of Lightly Loaded Spur Gears  I. Hayashi, T. Hayashi  349    IFToMM  1986  In-Plane Circumferential Vibrations of Rotating Discs  S. Amada  355    IFToMM  1986  Turbine Generator Vibration Monitoring in the CEGB  D.L. Thomas  361    IFToMM  1986  A Diagnostic System to Define Malfunctioning Conditions of A Turbogenerator  G. Diana, M. Gasparetto, F. Cheli, A. Manenti, A. Manenti  367    IFToMM  1986  An On-Line Computer System for Phase-Angle Monitoring in Turbogenerator  J.H. Wang  373    IFToMM  1986  Identification of Fractures in Rotors  M.R. Kujath  379    IFToMM  1986  An On-Line Crack Detection Method for Turbogenerator Rotors  G. Diana, N. Bachschmid, F. Angeli  385    IFToMM  1986  Fault Diagnosis in Rotating Machinery  M.F. White  391    IFToMM  1986  A Study on Ball Bearing Fault Diagnosis by Cepstral Analysis  J-E. Oh, E-S. Yoon, S-H. Yum, O-K. Kwon  397    IFToMM  1986  An Investigation of the Early Detection of Defects in Ball Bearings Using Vibration Monitoring -- Practical Limit of Detectability and Growth Speed of Defects  T. Miyachi, K. Seki  403    IFToMM  1986  Hilbert Transform Techniques in Machine Diagnostics  R.B. Randall  409    IFToMM  1986  Digital Control of Electro-Magnetic Damper for Rotating Machinery  B. Nagai, Y. Okada, K. Matsuda, K. Kibune  415    IFToMM  1986  Flexible Rotor Vibration Analysis Combined with Active Magnetic Bearing Control  O. Matsushita, M. Takagi, N. Tsumaki, M. Yoneyama, T. Sugaya, H. Bleuler  421    IFToMM  1986  Quasi-Modal Vibration Control by Means of Active Control Bearings  K. Nonami, D.P. Fleming  429    IFToMM  1986  On the Active Control of Rotors with Uncertain Parameters  P. Hagedorn, K. Kelkel, U. Weltin  437    IFToMM  1986  Automatic Control of the Vibration of the Flexible Rotor with Microcomputer  G-P. Feng, N. Xin  443    IFToMM  1986  Whirling of a Flexible Cylinder Filled with Liquid  S.H. Crandall, J. Mroszcyk  449    IFToMM  1986  Vibration of Rotor Containing Liquid  T. Shimogo, K. Yoshida, M. Kumagai, Y. Kazao  453    IFToMM  1986  Unstable Vibration of a Truncated Conical Rotor with 16 Spiral Fins Partially Immersed in Water  F. Hara  459    IFToMM  1986  Curing Self-Excited Vibrations in a Super-Critical Shaft  D. Thelen, A. Giers  467    IFToMM  1986  Self-Excited Vibrations of a Rotating Shaft Internal Friction  H. Ota, K. Mizutani  475    IFToMM  1986  On the Rubbing Phenomena in Turbomachinery  A. Curami, B. Pizzigoni, A. Vania  481    IFToMM  1986  Destabilization of Rotors from Friction in Internal Joints with Micro-Slip  J.W. Lund  487    IFToMM  1986  Unstable and Forced Vibrations of an Asymmetrical Shaft Driven by a Universal Joint  H. Ota, M. Kato  493    IFToMM  1986  Lateral Vibration of Rotating Body Driven through Constant-Velocity Joints  M. Saigo, T. Iwatsubo  499    IFToMM  1986  Investigations and Preventions of Self Excited Torsional Vibrations of Rotating Shafts due to Slipping Clutch  S. Yanabe, A. Okada, N. Yamagishi, A. Tonegawa, S. Ogawa, T. Li  505    IFToMM  1986  Some Theoretical Analyses on Flexible Rotor--Squeeze Film Damper Bearings System and Fluid Film Forces  G. Meng, Z.Q. Xue  511    IFToMM  1986  System Vibrations: Rotor with Self Excited Support  J. Awrejcewicz  517    IFToMM  1986  Approximate Computation of Unbalance Vibrations of Multi-Bearing Rotors  E. Kramer  523    IFToMM  1986  Influence of Slide Bearings and Support Dynamics in Rotor Dynamics  H.F. Schwaberger, W.J. Keusch  529    IFToMM  1986  Influence of Damped and Flexible Pedestals on the Dynamic Response of Flexible Rotors on Fluid Film Bearings  K.S. Ramakrishnan, B.S. Prabhu, B.V.A Rao  535    IFToMM  1986  Transient Vibration of Bladed Flexible Rotor due to Sudden Imbalance  M. Sakata, K. Kimura, H. Takahara, H. Ohnabe  541    IFToMM  1986  Dynamics of Textile Spinning Spindles and Rotors  A. Kahraman, M. Caliskan, H.N. Ozguven  547    IFToMM  1986  Computer Study of Radial Vibrations in a Rotor / Ball Bearing System  H. Tamura, E.H. Gad, A. Sueoka  553    IFToMM  1986  A Computer Program for Determination of the Natural Frequencies of Multilayer Shells  L. Papa  561    IFToMM  1986  Mechanical Model Study for Shrink Fit Rotor  W. Zhang, S. Xia, F. Chen, H. Song, H. Song  567    IFToMM  1986  On a Nature and Some Properties of Insensitive Speeds of a flexible Rotor  A.A Gusarov  571    IFToMM  1986  Dynamic Characteristics of the Rotors with Axial Vibration   B.C. Wen, W.Y. Wu, D.J. Liu  577    IFToMM  1986  Degeneration of the Free Vibration Frequency of the Crafts Loaded by Torsional Moment  A.J. Poplawski  583    IFToMM  1986  Labyrinth Seal Analysis for Centrifugal Compressor Design -- Theory and Practice  R.G. Kirk  589    IFToMM  1986  A Theoretical Approach to Labyrinth Seal Forces -- Lateral Forces of the Labyrinth Seal on a Whirling Rotor  T. Kameoka, M. Kurohashi, T. Fujikawa, T. Abe  597    IFToMM  1986  Theoretical and Experimental Study on the Destabilizing Forces by Labyrinth Seal  H. Kanki, S. Morii, A. Hizume  603    IFToMM  1986  Testing for Rotordynamic Coefficients and Leakage : Circumferentially-grooved Turbulent Annular Seals  D.W. Childs, C.H. Kim  609    IFToMM  1986  Rotordynamic Coefficients and Leakage Flow for Smooth and Grooved Seals in Turbopumps  R. Nordmann, F.J. Dietzen, W. Janson, A. Frei, A. Frei  619    IFToMM  1986  The Effects of Surface Waviness and Roughness on Seal Dynamics  T. Iwatsubo, B-S. Yang  629    IFToMM  1986  Steam Excited Vibration in Rotor-Bearing System  S. Hisa, H. Sakakida, A. Asatu, T. Sakamoto  635    IFToMM  1986  Fluid Force Testing Machine for Whirling Centrifugal Impeller  H. Ohashi, R. Hatanaka, A. Sakurai  643    IFToMM  1986  Fluid Effects on Rotor Dynamics of Hydraulic Turbomachines  R. Liebe  649    IFToMM  1986  Effects of Seals on Rotor Dynamics  M. Falco, G. Mimmi, G. Marenco  655    IFToMM  1986  Effect of the Fluid Film Seals on the Stability of Turbocompressor Rotor  M. Tanaka, S. Sugimura, J. Mitsui, A. Nishidoi  663    IFToMM  1990  Rotor instability due to leakage flow induced pressure acting on the rotor disc  A Tondl  3    IFToMM  1990  Stability of periodic torsional vibrations in turbine-generator rotors  G Toth  9    IFToMM  1990  Experimental investigation of reverse whirl of a flexible rotor  A Lingener  13    IFToMM  1990  Form whirl to whip in rotordynamics  S H Crandall  19    IFToMM  1990  Validation of rotor-dynamic models using dynamic testing  R L Eschleman, K R Guy  27    IFToMM  1990  A method to improve the accuracy of experimental models for the dynamic testing of turbogenerators  P S Leung, I A Craighean, T S Wilkinson  33    IFToMM  1990  Mechanical model study for tie rod fastening rotor system  S Xia, W Zhang, Z Rao, F Chen, X Li, G Wang  39    IFToMM  1990  Iterative techniques for the computation of the unbalance response of multi degrees of freedom nonlinear rotors  G Genta, A Repaci, I Briacca  45    IFToMM  1990  Parameter optimization for the dynamics of rotating machinery  W Diewald, R Nordmann  51    IFToMM  1990  Application of optimization techniques for hypercritical rotors   D Doizelet, D Bondoux  57    IFToMM  1990  Analytical and experimental research on some typical non-linear effects in the frequency response of a rotor on lubricated bearings  G Diana, F Cheli, A Manenti, F Petrone  65    IFToMM  1990  The design and application of a bearing test rig for dynamic coefficients  G J Kostrzewsky, D V Taylor, R D Flack  73    IFToMM  1990  Oil Pressure-Supply-Outlet influence on bearing characteristics  Z A Parszewski, J M Krodkiewski, D-X Li  79    IFToMM  1990  A method for measuring oil film coefficients of journal bearings  S Yanabe, S Yamashita, B Weyh  85    IFToMM  1990  Stability characteristics of worn journal bearings   M Tanaka, Y Hori  93    IFToMM  1990  Floating bush aerostatic journal bearings employing slot restrictors  S Yoshimoto, Y Anno, T Iiya  99    IFToMM  1990  Oil film and vibration characteristics of offset-halves journal bearing  I Matsumoto, J Esaki, T Furukawa, S Taniguchi  105    IFToMM  1990  Experimental analysis on non linear response of flexible rotor supported on uncentralised squeeze film dampers  M Guang  113    IFToMM  1990  The behaviors of resonant bistable operation in flexible rotor-squeeze film damper systems  C Zhu, X Feng, J Xu, C Fu  119    IFToMM  1990  Dynamic characteristics of a centralised squeeze film damper  A Kassai, J Der Hagopian, M Lalanne, D F Thomas  125    IFToMM  1990  Investigation of travelling wave vibration for bladed disk in Turbomachinery  L-T Yan, Q-H Li  133    IFToMM  1990  Vibration behaviour of laced turbocharger blading  G M Chapman, W Xu  137    IFToMM  1990  Vibrations of bladed disks and their elements including interblading bonds and mistuning  Y Vorobiev, M L Korsunsky, A I Shepel  143    IFToMM  1990  The optimal distribution of the detuned blades around the disk from the stress point of view  R Rzadkowski  147    IFToMM  1990  Vibration analysis of a rotating orthotropic composite blade with an open crack by the finite element method  L-W Chen, G-S Shen  155    IFToMM  1990  On the extension of the analytical solution of the transient excited vibrations of a SDOF-system on the run-up and run-down of turbine blades  H Irretier  161    IFToMM  1990  Flutter analysis of plate-like rotating blades  G Jacquet-Richardet, R Henry  171    IFToMM  1990  Material damping of a prestressed beam  R Hinrichs, O Marhenholts  179    IFToMM  1990  Interface damping in blade attachment region   J S Rao, M A W Usmani, C V Ramakrishnan  185    IFToMM  1990  Damping properties of steam turbine blades  N F Rieger, T H McCloskey  191    IFToMM  1990  Analysis of transient torsional vibrations in the rotor machine using a hybrid model  R Bogacz, H Irretier, T Szolc  207    IFToMM  1990  Dynamic response of a rotor-foundation-soil system considering the effects of an active or passive environment  E de Mesquita Neto  213    IFToMM  1990  Eccentricity and meshing contributions to the dynamic tooth loading on geared trains  P Velex, D Berthe  219    IFToMM  1990  The low frequency content of the fluctuating forces induced by gear faults on geared rotors  Ph Briere, J Sabot  225    IFToMM  1990  Instability of a rotor filled with liquid  S Morishita  233    IFToMM  1990  Thermal bow in an axisymmetrical shaft containing a transverse notch and related vibrational behaviour  N Bachschmid, D Del Vescovo  239    IFToMM  1990  An examination of errors in modified hydraulic analogy in the presence of normal and oblique shocks  J S Rao  245    IFToMM  1990  Vibrating response to the errors in manufacturing and assembling of rigid coupling  D Jin, L Zhang, L Ji, W D Pilkey  251    IFToMM  1990  Balancing of highly flexible shaft lines on their critical bending speeds  R Chevalier  257    IFToMM  1990  Real time balancing of a flexible rotor supported by magnetic bearing  Y Kanemitsu, M Ohsawa, K Watanabe  263    IFToMM  1990  New methods of Francis runner balancing  A Bolotnikov  269    IFToMM  1990  Squeeze film damper as an application of electro-rheological fluid   S Morishita, J Mitsui  277    IFToMM  1990  Development of porous squeeze film damper bearings for improving the blade loss dynamics of rotor-support systems  S Zhang, L Yan, Q Li  283    IFToMM  1990  A study of non-newtonian viscosity effects on the offset circular orbit squeeze-film damper  Z-Q Xue, G Meng  289    IFToMM  1990  Study of a squeeze film damper with an axial controlled flow  O Bonneau, J Frene  295    IFToMM  1990  Annular honeycomb seals: additional test results for leakage and rotordynamics coefficients  D Childs, D Elrod, C Ramsey  303    IFToMM  1990  An experimental study on the static and dynamic characteristics of damper seals  T Iwatsibo, B C Sheng  307    IFToMM  1990  Evaluation of dynamic characteristics of parallel grooved seals by theory and experiment  T Iwatsibo, B C Sheng  313    IFToMM  1990  Experimental evaluation of holding forces in floating ring seals  R G Kirk, D B Browne  319    IFToMM  1990  A feasibility and technology assessment for the implementation of active rotor vibration control systems  M L Adams, T H McCloskey  327    IFToMM  1990  Active chamber system for control of rotordynamics. Theory and experiment  J Althaus, H Ulbrich, T Jager  333    IFToMM  1990  Active control of vibrations of rotor-support systems by the controlled squeeze film damping bearings  J Gu, X Ren  339    IFToMM  1990  Dynamic analysis of the large rotor-foundation-soil system  Z-C Zhang, N-P Wu  347    IFToMM  1990  Rotordynamics of the Vulcain LH2 turbopump. Comparison between test results and dynamic analysis  C Brune, F Lassoudiere  353    IFToMM  1990  The dynamic interaction of the turboset with the foundation  J Smejkal  361    IFToMM  1990  Characterizing the influence of the structure connection dampings on dynamical rotor behavior  B Vinsonneau, F Lemant  367    IFToMM  1990  Fluid induced rotor vibrations in decanter centrifuges  J Colding-Jorgensen  375    IFToMM  1990  The effect of oil filled bolster on textile spindle dynamics  U Degirmenci, M Akkok, M Caliskan  383    IFToMM  1990  Analysis of the causes of vibration level increase in dual cement mill bearings and foundation  S Gajin, R Folic, G Varju  389    IFToMM  1990  Dynamic analysis of aircraft engines subjected to maneuvers  M Gerardin, N Kill  397    IFToMM  1990  Experimental and theoretical dynamic analysis of a rotating shrouded impeller   A Berlioz, R Henry, J M Pugnet, G Ferraris  403    IFToMM  1990  A steam turbine rotor remaining life estimation with deterministic and probabilistic fracture analysis using the SAFER computer code  G T Cunningham, R A Smoak  411    IFToMM  1990  Identification of mechanical systems by means of the extended Kalman filter  C P Fritzen, S Seibold  423    IFToMM  1990  Parameter estimation and model updating of rotor-bearing systems by the direct curve-fit of frequency response functions  J R F Arruda, M V M Duarte  431    IFToMM  1990  Modal parameter identification by impact excitation tests of rotor supported in oil-film bearings  J Tonnesen, J W Lund  437    IFToMM  1990  Identification of journal bearing stiffness and damping coefficients by extended Kalman filter  Z Y Mohammad, J S Burdess  445    IFToMM  1990  Diagnosis of malfunctions in large turbine-generators: some case histories  M Cappelli, G Diana, G L Lapini, A Vallini  455    IFToMM  1990  Application of phase angles to fault diagnosis  G Yue, L Yan, Q Li  461    IFToMM  1990  The application of pattern recognition technique in fault diagnosis of machinery equipment  Y Yan, T Shimogo  467    IFToMM  1990  The application of Haar transform in signature extraction and condition monitoring of mechanical system  Y Yan, T Shimogo  473    IFToMM  1990  Alleviation of vibration by bearing layout redesign  K Krynisky  477    IFToMM  1990  Monitoring of torque variation of rotating systems with an Induction motor  T Shimogo, A Motoya, T Ono, Y Miyata  483    IFToMM  1990  New concepts for contact-free support of industrial high speed rotors  H Bleuler, H Bernhardt  491    IFToMM  1990  Non linear hysteresis effects in electromagnetic bearings  H Springer, E H Malsen, R R Humphris  497    IFToMM  1990  Dynamic behavior of flexible rotors with active magnetic bearings on safety auxiliary bearings  A Gelin, J J M Pugnet, D Hagopian  503    IFToMM  1990  A high speed rotor in active magnetic bearings  R Larsonneur  509    IFToMM  1990  Control of rotor vibration due to cross stiffness effect of active magnetic bearing   O Matsushita, M Tagaki, M Yoneyama, T Yoshida, I Saitoh  515    IFToMM  1990  An analytical solution for the forced vibration response of tuned bladed disk assemblies   K Y Sanliturk, M Iremgun, D J Ewins  523    IFToMM  1990  Experimental investigation of bladed disk vibrations  L Pust  529    IFToMM  1990  Design of blade-shroud to minimize the sensitivity of response to preload mistuning  J H Wang, H L Yau  535    IFToMM  1990  Unstable vibration of a single rotating disk in a confined fluid  F Hara  543    IFToMM  1990  Supercritical behaviour of rotating disc.  S G Hutton, L Yang  549    IFToMM  1990  The experimental analysis for lateral vibration characteristics of disk-shaped bevel gear  Q Li  553    IFToMM  1990  Modelling and estimation of hydroelectric machinery  A Sperber, H I Weber  559    IFToMM  1990  Self excited natural vibrations of a turbogenerator set and their elimination  C Besigk, W Blank, G Ohlmann, P Shulz  565    IFToMM  1990  Seismic and shock response of a rotor on hydrodynamic bearings  S Edney, C H J Fox, E J Williams  571    IFToMM  1990  Analytical and experimental rotordynamic predictions during prototype development of a turbocharger  P S K Rangan, C Haridas, R Padmanabhan, B S Prabhu  577    IFToMM  1990  Tilt pad seal and damper bearing applications to high speed and high density centrifugal compressors  E A Memmott  585    IFToMM  1990  Failure detection in heavy machinery using process and vibration signals and extraction of characteristics  C Troeder, A Laschet  591    IFToMM  1990  An on line application of a turbomachinery supervisory system  A Curami, M Gasparetto, A Vania  597    IFToMM  1990  Managing influence coefficients for turbomachinery balancing: the use of regression techniques  A J Smalley  605    IFToMM  1990  Reduction of pump vibration applying modal balancing of hydraulic excitation  H Kanki, T Kawakami  611    IFToMM  1990  Identification and balancing of flexible rotors  V P Roizman, V A Dubrovsky  617    IFToMM  1994  ROTORDYNAMIC RESPONSE IN NONLINEAR ANISOTROPIC MOUNTING SYSTEMS   F.F. Ehrich  1    IFToMM  1994  PARAMETER IDENTIFICATION IN ROTATING MACHINERY BY MEANS OF MAGNETIC BEARINGS  R. Nordmann, M. Matros, and T. Neumer   7    IFToMM  1994  MODERN TECHNOLOGY DEVELOPMENTS FOR STEAM AND GAS TURBINE BLADING   Neville F. Rieger  17    IFToMM  1994  DIAGNOSTICS OF PLANETARY BEARINGS  Robert B. Randall  25    IFToMM  1994  EXPLORATORY RESEARCH ON CHAOS CONCEPTS AS DIAGNOSTIC TOOLS FOR ASSESSING ROTATING MACHINERY VIBRATION SIGNATURES  M.L. Adams and I.A. Abu-Mahfouz  29    IFToMM  1994  ANALYSIS OF RUBBING IN A VERTICAL ROTOR WITH OBSERVATION OF CHAOTIC MOTION   Humberto Camargo Piccoli and Hans Ingo Weber  41    IFToMM  1994  VIBRATIONS OF A ROTATING SHAFT CONTAINING A TRANSVERSE CRACK (MAJOR CRITICAL SPEED OF A HORIZONTAL SHAFT)  Yukio Ishida, Toshio Yamamoto, Kazuharu Hirokawa  47    IFToMM  1994  FORCED VIBRATION OF MISTUNED BLADED DISCS IN STATIONARY OPERATIONS  H. Irretier, Romuald Rzadkowski  53    IFToMM  1994  ANALYTICAL AND EXPERIMENTAL INVESTIGATION OF BLADED?DISK/SHAFTCOUPLED SYSTEM   Wen Zhang, Wenliang Wang, Hao Wang, and Jiong Tang  63    IFToMM  1994  DYNAMIC BEHAVIOR OF FLUID IMMERSED ROTATIONALLY PERIODIC STRUCTURES APPLICATION TO A SHIP PROPELLER  Christian Dal-Ferro, Georges Jacquet-Richardet, and Remy Henry  69    IFToMM  1994  HOPF BIFURCATION IN A NONLINEAR ROTOR SYSTEM SUBJECTED TO A FOLLOWER FORCE  Krzysztof Marynowski and Krzysztof Czolcznski  75    IFToMM  1994  TURBOFAN BLADE LOSS DESIGN TOOLS  Peter D. Hylton and Donald W. Bums  81    IFToMM  1994  DYNAMICS OF A ROTOR WITH ANNULAR RUB  John L. Isaksson  85    IFToMM  1994  CHAOTIC RESPONSE OF ROTOR/SATOR RUBS  Wei Yang and Xikuan Tang  91    IFToMM  1994  USE OF DIRECTIONAL SEPCTRA FOR DIAGNOSIS OF ASYMMETRY/ANISOTROPY IN ROTOR SYSTEMS  Chong-Won Lee and Chee-Young Joh  97    IFToMM  1994  MODEL IDENTIFICATION IN COMPUTER-CONTROLLED MONITORING OF ROTORMACHINERY  A. Curami and A. Vania  103    IFToMM  1994  APPLICATION OF THE EXPERIMENTAL DETERMINATION OF CHARACTER MATRICES TO THE BALANCING OF A FLEXIBLE ROTOR  Hiroshi Iida  111    IFToMM  1994  IDENTIFICATION WITH SIMPLE MODELS OF THE MODE SHAPES AND UNBALANCES OF ROTOR SYSTEMS FROM BEARING MEASUREMENTS  N. Bachschmid, R. Bemante, S. Bruni and A. Collina  117    IFToMM  1994  DYNAMIC BEHAVIOUR OF ELECTRIC MOTORS FOR MARINE AND NAVAL APPLICATIONS  G. Diana, B. Pizzigoni, and C. Gorla  123    IFToMM  1994  CONTRIBUTION OF SPECTRAL ANALYSIS FOR INTERPRETING VULCAIN HYDROGEN TURBOPUMP ROTORDYNAMICS TEST RESULTS  C. Brune, A. L. Mertz  129    IFToMM  1994  CALCULATING VANE-PASS FREQUENCIES  William C. Foiles  137    IFToMM  1994  IDENTIFICATION AND RESOLUTION OF AERODYNAMICALLY INDUCED SUBSYNCHRONOUS VIBRATION DURING HYDROCARBON TESTING OF A 34,000 HP CENTRIFUGAL COMPRESSOR  M. J. Kuzdzal, J. F. Hustak, and J. M. Sorokes  143    IFToMM  1994  ANNUALR PUMP SEALS AND ROTORDYAMICS  Dara Childs  153    IFToMM  1994  PRACTICAL ROTOR DYNAMICS GIVES INSIGHT TO DIAGNOSTICS, BALANCING, CORRECTIONS  Charles Jackson  163    IFToMM  1994  MODELING, ANALYSIS AND COMPUTATION IN ROTORDYAMICS: A HISTORICAL PERSPECTIVE  H. D. Nelson  171    IFToMM  1994  VIBRATION OF TURBINE ROTOR SHAFT SUPPORTED BY VERTICALLY POSITIONED TWO-LOBE JOURNAL BEARINGS  Iwao Matsumoto, Toyoaki Furukawa, and Jinro Esaki, Yukihiko Inoue  179    IFToMM  1994  ANALYSIS AND DESIGN OF FLOATING OIL RING SEALS FOR CENTRIFUGAL COMPRESSORS  R. Gordon Kirk  185    IFToMM  1994  THE DYNAMIC FORCES OF PUMP ANNULAR SEALS THROUGH TWO PHASE FLOW  T. Iwatsubo and T. Nishino  191    IFToMM  1994  VIBRATION ANALYSIS FOR DETECTION OF GEAR FAULTS WITHIN GEARBOX, APPLICATION TO SPUR AND HELICAL GEARS  M. Alattass, J. Mahfoudh, and D. Play  197    IFToMM  1994  MODELING AND ANALYSIS OF GEARED ROTORDYNAMIC SYSTEMS  C. S. Chen, and S. Natsiavas, H. D. Nelson  205    IFToMM  1994  A MATRIX ASSEMBLY TECHNIQUE TO CALCULATE EPICYLIC GEAR FREQUENCIES  William C. Foiles  213    IFToMM  1994  FLEXIBILITY ENHANCED QUASI-STATIC ANALYSIS OF ROLLING ELEMENT BEARINGS  L. M. Greenhill, D. H. Merchant, S. G. Ryan  217    IFToMM  1994  A COMPLEX MODEL FOR LIGHTLY LOADED BEARINGS  Huaping Mu, Chengsong Chang, Xikuan Tang  225    IFToMM  1994  PROCESS-LIQUID TURBULENT-FLOW HYDROSTATIC BEARINGS: ANALYSIS AND TESTS FOR ROTORDYNAMIC COEFFICIENTS  Zhou Yang, Luis San Andres, and Dara W. Childs  233    IFToMM  1994  ABNORMAL VIBRATION AND SELF-CENTERING FUNCTION OF SUN GEAR SHAFT IN PLANETARY GEAR TRAIN  Shigeo Yanabe and Masanobu Yoshino  243    IFToMM  1994  AN INFLUENCE OF GEAR TEETH IMPACTS ON TORSIONAL VIBRATIONS OF A DISCRETE CONTINUOUS MODEL OF THE DRIVE SYSTEM  Tomasz Szolc and Roman Bogacz  249    IFToMM  1994  EIGENSOLUTION OF ROTARYWING SYSTEM  Zhaochang Zheng and Gexue Ren  255    IFToMM  1994  A HYBRID METHOD FOR VIBRATION ANALYSIS OF ROTOR SYSTEMS  Bo Suk Yang  261    IFToMM  1994  SIMULTANEOUS OPTIMUM DESIGN OF SHAFT CONFIGURATION AND DAMPER IN TORSIONAL VIBRATION OF TURBOGENERATOR ROTOR SET  T. Iwatsubo, K. Adachi, and S. Okada  269    IFToMM  1994  APPOXIMATE FORMULAS FOR THE MAXIMUM TRANSIENT RESONANCE RESPONSE OF UNBALANCE-EXCITED ROTORS  H. Irretier and F. Leul  275    IFToMM  1994  POST-STABILITY ATTENUATION OF ROTOR-BEARING SYSTEMS  Krzysztof Krynicki, Zdzislaw A. Parszewski  281    IFToMM  1994  DYNAMIC INSTABILITY OF COMPOSITE ROTORS  Håkan L. Wettergren  287    IFToMM  1994  HIGH-SPEED BALANCING BY THE TWO-RUN TECHNIQUE  Tang Bing Xin and Wen Bang Chun  293    IFToMM  1994  RECENT ADVANCES IN THE STUDY OF OIL LUBRICATED JOURNAL BEARINGS  P. G. Morton  299    IFToMM  1994  INSIGHTS INTO THE STATIC AND DYNAMIC CHARACTERISTICS OF JOURNAL BEARINGS  A. El-Shafei  307    IFToMM  1994  APPLICATION OF MODAL METHODS IN ROTOR DYNAMICS  Jorgen W. Lund  317    IFToMM  1994  DYNAMIC BEHAVIOR OF SYMMETRIC COAXIAL CO AND COUNTER-ROTATING ROTORS APPLICATION TO A PROPFAN ENGINE  Michel Lalanne and Guy Ferraris  321    IFToMM  1994  NUMERICAL STUDY OF A FLEXIBLE ROTOR MOUNTED IN AN ACTIVE SQUEEZE FILM DAMPER  Olivier Bonneau and Jean Frene  327    IFToMM  1994  FLUID INERTIA EFFECTS ON THE NON-LINEAR RESPONSE OF A RIGID ROTOR SUPPORTED ON SQUEEZE-FILM DAMPERS  Padmanabhan Sundararajan, Sherif T. Noah, and Luis San Andres  333    IFToMM  1994  DEVELOPMENT OF AN ADVANCED HYBRID SQUEEZE FILM DAMPER FOR ROTOR SYSTEM VIBRATION CONTROL  Changsheng Zhu and Xixuan Wang  341    IFToMM  1994  ROTOR VIBRATION OF A STEAM TURBINE CAUSED BY NOZZLE EROSION  H. Nomoto and H. Sakakida  351    IFToMM  1994  DYNAMIC RESPONSE OF A ROTOR BEARING SYSTEM DUE TO BEARING FAILURE  Horst Ecker, Helmut Springer, and Hermann Haselbacher  357    IFToMM  1994  UNBALANCE RESONANCE VIBRATION CONTROL FOR MAGNETICALLY BORNE FLEXIBLE ROTORS  Osami Matsushita, Naohiko Takahashi, Mitsuho Yoneyama, and Yasuo Fukushima  363    IFToMM  1994  STUDY ON VIBRATION RELIABILITY DESIGN FOR BEARING OF TURBINE-GENERATOR SETS  Jinyuan Shi, Hansheng Gong, and Zhenkun Lin  371    IFToMM  1998  Magnetic bearings as a component of smart rotating machinery  G. Schweitzer   3    IFToMM  1998  Active vibration control of rotors  H. Ulbrich   16    IFToMM  1998  Rotor vibration control using squeeze film dampers  R. Holmes  32    IFToMM  1998  Recent results for honeycomb and hole pattern stator annular damper seals  D. W. Childs   52    IFToMM  1998  Rotordynamic problems experienced in actual machines  M. Tanaka   68    IFToMM  1998  Some developments in machine condition monitoring  R. B. Randall  83    IFToMM  1998  Prediction of damage accumulation in vibrating rotors  M. Balda  101    IFToMM  1998  Detection of crack position and depth in rotating shafts  I. Hachmann, K. Popp   113    IFToMM  1998  Determining location and extent of rotor damage  M. Musil, L. Starek   125    IFToMM  1998  Computing critical speeds for rotating machines with speed dependent bearing properties   M. Friswell, M. Smart, S. Garvey, J. Penny  136    IFToMM  1998  Rotor bearing model order reduction  M. Rades   148    IFToMM  1998  On the application of the substructuring method to the analysis of rotor/stator- dynamics  R. Rocha, M. Zindeluk, A. Neto   160    IFToMM  1998  Nonlinear rotor dynamic analysis using finite elements and equivalent linearization   A. EI-Shafey, H. N. Bayoumi, A. M. A. Mansour   175    IFToMM  1998  Time integration of transient vibrations of nonlinear rotordynamic systems having mass coupled substructures  H. Boll   188    IFToMM  1998  Dynamic analysis of a crankshaft in bending with an electric motor and nonlinear fluid film-bearings   R. Dufour, M. Gerard, M. Chareyron  200    IFToMM  1998  Numerical methods for the stability investigation of flexural vibration of rotor systems supported by fluid film-bearings  J. Zapomel, E. Malenovsky   212    IFToMM  1998  Dynamic characteristics of pump seals with spiral groove  T. Iwatsubo, H. Ishimaru  224    IFToMM  1998  Influence of labyrinth seal geometry on rotordynamic coefficients  K. Kwanka   241    IFToMM  1998  Development of labyrinth seals and gas bearings in high-performance turbomachinery using finite difference-techniques  H. P. Weiser, R. Nordmann  252    IFToMM  1998  Vibrations in misaligned rotor ball bearing systems  C. W. Lee, Y. S. Lee  262    IFToMM  1998  Diffuser rotating stall and influence on shaft excitational forces, Part 1: Experimental investigation  E. Torbergsen, M. White  274    IFToMM  1998  Gas turbine rotor exposed to the Newkirk-effect  B. Larsson   286    IFToMM  1998  Rotor dynamic analysis of a submerged turbine generator driven by liquefied natural gas   A. J. Smalley. J. Hollingsworth, G. Habets, H. Kirnmel  298    IFToMM  1998  A rotordynamic analysis of a fourteen stage pump with particular emphasis on the impeller shroud and wearing seal modelling  A. S. Lee, T. W . Ha  310    IFToMM  1998  Prediction and measurement of dynamic gear transmission error  S. Du, R. B. Randall  323    IFToMM  1998  A two stage approach for enhanced diagnosis of rotating machines  S. Seibold. I. Bucher   338    IFToMM  1998  Advanced vibrational diagnostic for failure source localisation   U. Suedmersen, Y. Liu, D. Stegemann, W. Reimche, 0. Pietsch   350    IFToMM  1998  Condition monitoring: Experimental study of the transmission error for the detection of gear faults   J. Mahfoudh, D. Remond, C. Bard, C. Renoux   364    IFToMM  1998  Optional techniques for active magnetic bearing equipped flexible rotors   0. Matsushita, T. Iwatsubo, K. Iizuka  377    IFToMM  1998  Engineering for rotors supported on magnetic bearings: The process and the tools  J. Schmied, F. Betschon   389    IFToMM  1998  Model reduction and robust observer design for turbine generator shafts  P. Lang, D. Pratzel-Wolters, J. Xu, S. Kulig  407    IFToMM  1998  Rotordynamic modelling and control system design for an aircraft gas turbine rotor suspended on magnetic bearings   B. Antkowiak, J. Scholten, F. Nelson,  419    IFToMM  1998  Active vibration damping for rotors by a controllable oil-film bearing  W. Wu, F. Pfeiffer   431    IFToMM  1998  Coupling of elastic and gyroscopic modes of rotating disc structures  F. Reuter   443    IFToMM  1998  Vibration and life estimation of rotor structures  H. Irretier, 0. Repetski   456    IFToMM  1998  A contact model of a rotating, rubbing blade  I. Jiang, J. Ahrens, H. Ulbrich, E. M. Scheideler   478    IFToMM  1998  2D self excited vibration of a palisade and a bladed disk  R. Rzadkowski, V. Gnesin, A. Kovalyov   490    IFToMM  1998  A comparison of the experimental and predicted rigid rotor stability threshold of a highly preloaded three lobe bearing  R. D. Flack, G. I. Kostrzewsky   501    IFToMM  1998  The effects of vertical preload and load direction on the stability characteristics of offset-halves journal bearings  M. Tanaka, K. Suzuki   513    IFToMM  1998  Oil whip in transient operating conditions  S. Verstege   525    IFToMM  1998  Non-linear inverse modelling to estimate forces in journal bearings from measured orbits   M. Jecmenica, M. White, N. Bachschmid, E. Tanzi   536    IFToMM  1998  Dynamic characteristics of hydrodynamically lubricated tilting pad thrust bearings  E. Storteig, M. F. White   548    IFToMM  1998  Application and remarks on the finite bearing solution (FBS)  A. Fuerst, H. I. Weber, G. C. Brito   560    IFToMM  1998  Experimental analysis of a tilting pad journal bearing influence in a vertical rotating system  K. L. Cavalca, F. G. Dedini  571    IFToMM  1998  Vibration control of a rotor by changing preload of a tilting pad bearing   Y. Kanemitsu, S. Kijimotao, K. Matuda, Y. Tatebayashi, M. Hata   583    IFToMM  1998  Observation of disk axial face excited instability  R. G. Kirk  595    IFToMM  1998  Subharmonic oscillation of order 1/2 and internal resonance phenomena in rotor systems  Y. Ishida, T. Inoue, K. Takeuchi   605    IFToMM  1998  On the dynamical behaviour of a textile spindle with clearances  D. Waldeck   617    IFToMM  1998  Parametrical vibration of rotary flexibly supported foundations with rotor  0. Zahorec, M. Musil, P. Elesztos   629    IFToMM  1998  Field balancing of two rotors placed on a coupling supporting structure  H. Wilhelm, H. P: Wolfel  641    IFToMM  1998  Balancing of flexible rotors some considerations on modal convergence  H. Schneider, A. G. Parkinson   653    IFToMM  1998  A new balancing method applying LMI optimization method  H. Kanki, M. Kawanishi, K. Ono   667    IFToMM  1998  The use of model parameters for the identification of the unbalance distribution of elastic rotors  J. Belz, H. Irretier   679    IFToMM  1998  New excitation and response measurement techniques for modal testing of flexible rotors   T. Kreuzinger-Janik, H. lrretier   695    IFToMM  1998  Experimental validation of unbalance identification methods  N. Bachschmid, R. Dellupi  709    IFToMM  1998  Parameter identification of rotormachinery supporting structures  A. Curami, A. Vania  722    IFToMM  1998  Experimental identification of the pedestals in a rotor-bearing-pedestal system  N. S. Feng, E. J. Hahn  734    IFToMM  1998  Testing of micromotors and rotating microsystems   G. Haddad, W. Brenner, G. Abraham, A. Matzner, G. Popovic, A. Vujanic   746    IFToMM  1998  Dry friction induced backward whirl: theory and experiment  A. Bartha  756    IFToMM  1998  A contribution to the rotor-stator contact  J. Gruber   768    IFToMM  1998  Whirl simulation of a rotor colliding with annular guard during acceleration  S. Yanabe   780    IFToMM  1998  Nonlinear stability analysis of a single mass rotor contacting a rigid auxiliary bearing  H. Ecker   790    IFToMM  1998  Rub induced non-linear vibrations considering the thermo-elastic effect  R. Liebich  802    IFToMM  1998  Steady state analysis of a multi-disk or continuous rotor with one retainer bearing   G. Wegener, R. Markert, K. Pothmann   816    IFToMM  1998  Travelling wave speed instability  P. Schmiechen, D. Ewins   829    IFToMM  1998  Theoretical and experimental investigations of impeller casing interaction forces   J. Sobotzik, R. Fongang, R. Nordmannvg   841    IFToMM  1998  Numerical determination of radial electro-magnetic forces on rotors of electrical machines   D. Flockermann, M. Klocke, S. Kulig  856    IFToMM  1998  Simulation of a magnetic drive pump with asynchronous motor considering non-linear effects   C. Klesen, M. Matros, R. Nordmann  876    IFToMM  1998  Identification and reduction of the anisotropy of flexible rolls by partial machining  D. Wiese, M. Breitwieser, G. Wegener   888    IFToMM  1998  Active magnetic bearings for the identification of dynamic characteristics of turbulent journal bearings  E. Knopf, R. Nordmann   904    IFToMM  2002  Adaptive control of a rotor excited by destabilizing cross-coupling forces  Hirschmanner M, Steinschaden N and Springer H   38    IFToMM  2002  Fault diagnosis in a centrifugal pump using active magnetic bearings  Nordmann R and Aenis M   46    IFToMM  2002  Two-dimensional vibration abatement in a turning process  Al-Jumaily AM, Oberst H and Yan W   56    IFToMM  2002  A magnetorheological fluid damper for rotor applications  Forte P, Paterno M and Rustighi E   63    IFToMM  2002  Path-following analysis versus WMSL method – an application for nonlinear magnetic bearing characteristics  Steinschaden N and Springer H   71    IFToMM  2002  Active stabilisation of a rigid rotor by a piezoelectrically controlled mobile journal bearing system  Przybylowicz PM   79    IFToMM  2002  A study on parametric excitation for suppressing self-excited rotor vibrations  Ecker H, Pumhoessel T and Tondl A   85    IFToMM  2002  A novel frequency domain identification of a MIMO AMB rigid rotor system  Ahn H-J, Park I-H and Han D-C   93    IFToMM  2002  Fuzzy modal control of a flexible rotor by piezoelectric actuators arranged on a plane  Malhis M, Gaudiller L and Der Hagopian J   101    IFToMM  2002  LPV model reduction of high speed gyroscopic rotors in magnetic bearings for robust control  Li G, Lin Z and Allaire PE   117    IFToMM  2002  General influence coefficient algorithm in balancing of rotating machinery  Yu X   123    IFToMM  2002  Multi plane balancing of a rotating machine using a single transducer  Zang C, Lees AW and Friswell MI   130    IFToMM  2002  Limits for the use of auto-balancing  Olsson K-O   137    IFToMM  2002  Effect of interfacial damping on blade stresses  Rao JS, Singh AK and Borate S   146    IFToMM  2002  Measurement and analysis of random vibration of steam turbine low pressure end blade  Kaneko Y, Mori K, Iizuka S and Ooyama H   153    IFToMM  2002  Model-based estimation of contact forces of a rotating blade  Ahrens J, Soeffker D and Ulbrich H   160    IFToMM  2002  Vibrations of rotating open cylindrical shell blade  Kee Y-J and Kim J-H   167    IFToMM  2002  Rotordynamic stability case studies  De Choudhury P   175    IFToMM  2002  The field test and calculation analysis for unstable vibration of 320MW turbomachinery rotor-bearing systems  Lu S, Fu H, Wang J and Ma Y   183    IFToMM  2002  Case studies of fault identification in power plant large rotating machinery  Bachschmid N, Pennacchi P, Vania A, Zanetta GA and Gregori L   191    IFToMM  2002  Early detection of non-linear effects in fluid-film journal bearings  Pennacchi P and Vania A   201    IFToMM  2002  Model based analysis of the non-linear behaviour of oil-film journal bearings  Bachschmid N and Vania A   209    IFToMM  2002  Condition monitoring using neural networks  Hackstein H   219    IFToMM  2002  Condition monitoring: experimental study of combined faults on gears and bearings  Mahfoudh J and Breneur C   227    IFToMM  2002  Improved machine vibration models  Lees AW   235    IFToMM  2002  Operating experience with an on-line vibration control system for PWR main coolant pumps  Runkel J and Hellmich   243    IFToMM  2002  The research for the system and network of condition monitoring, data management, analysis, diagnosis and remote transmission of turbo-generator group  Lu S, Tong X, Jin R and Wang J   251    IFToMM  2002  Experimental validation of an original software package based on chaos theory for monitoring and diagnostics of rotating machinery  Lucifredi A, Magnetto A and Silvestri P   257    IFToMM  2002  Localisation of the TDC-position from crankshaft speed fluctuation measurements  Johnsson R and Agren   265    IFToMM  2002  Rotordynamic fault diagnostics using phase coherent filtering  Pooley J and Murray S   273    IFToMM  2002  Bond graph approach in diagnosing truncated beat phenomena in high speed rotating machinery  Giridhar RK, Barad S, Suresh TN and Mukherjee A   279    IFToMM  2002  Investigations into engine transient response due to internal and external dynamic excitations  Moreno Barragan JA   286    IFToMM  2002  Diagnosis of localised and extended rolling element bearing faults in the presence of strong gear signals  Randall RB and Antoni J   294    IFToMM  2002  Development of a hybrid neural/expert system to diagnose problems in induction motors  Brito JN and Pederiva R   302    IFToMM  2002  Parameter monitoring of a rotor system excited by stochastic forces  Pederiva R and Eduardo AC   310    IFToMM  2002  Salvaging transient measurement signals with serious flaws using wavelet analysis  Uchikawa H, Shi Q, Ando S and Saegusa H   318    IFToMM  2002  Aggregated monitoring of technical condition in industrial systems  Steinebach C and Thorstensen TA   326    IFToMM  2002  Determination of degree of bilinearity and cyclostationarity in signals: applications to rotating machines  Bouillaut L, Raad A and Sidahmed M   335    IFToMM  2002  Studies on rotor cracks due to bending and torsional effects  Subbiah R, Montgomery J and Banks RL   343    IFToMM  2002  Dynamics of rotating shafts with delaminations – modeling and solution approach  Wauer J   350    IFToMM  2002  Non-linear effects in cracked rotors  Bachschmid N and Tanzi E   358    IFToMM  2002  Crack detectability in vertical axis cooling pumps during operation  Bachschmid N, Pennacchi P, Tanzi E, Verrier P, Hasnaoui F and Aabadi K   366    IFToMM  2002  The complicated response of a simple rotor with a fatigue crack  Yang JD, Zheng TS, Zhang W, Yuan HQ and Wen BC   374    IFToMM  2002  Vibration analysis in the characterization of the dynamic behaviour of cracked rotating shafts  García-Illescas R and Gomez-Mancilla J   380    IFToMM  2002  Improvement of damping parameters of flexible rotors by experimental modal analysis and model updating  Irretier H and Lindemann S   388    IFToMM  2002  Unbalance responses of rotor/stator systems with nonlinear bearings by the time finite element method  Demailly D, Thouverez F and Jezequel L   396    IFToMM  2002  Generalized entities: A modern framework for rotor dynamics software  Swanson EE and Pulitzer III SW   404    IFToMM  2002  Stabilisation of high-speed flexible rotors supported by oil-film bearings  Sahinkaya MN and Burrows CR   412    IFToMM  2002  Modeling effect of flexible and rigid couplings in mechanical systems  Tapia AT and Cavalca KL   420    IFToMM  2002  Practical applications of singular value decomposition in rotordynamics  Cloud CH, Foiles WC, Li G, Maslen EH and Barrett LE   429    IFToMM  2002  Perturbation theory in modal analysis of mistuned rotors  Irwanto B, Hardtke H-J and Pawandenat D   439    IFToMM  2002  Partial compensation of unbalance by one- and two-plane automatic balancing devices  Ryzhik B, Duckstein H and Sperling L   446    IFToMM  2002  Electromagnetic circulatory forces and rotordynamic instability in electric machines  Holopainen TP, Tenhunen A and Arkkio A   456    IFToMM  2002  Finite element stability analysis of multibearing rotors with internal damping  Forrai L   464    IFToMM  2002  A method for analysing the dynamic behavior of rotor-bearing systems with nonlinear supports  Xia S, Wang L, Huang W, Hu C and Jiao Y   471    IFToMM  2002  Prediction of rotordynamic stability for a high pressure high speed turbopump unit  Kwak H-D, Lee Y-B, Kim C-H, Ha T-W and Woo Y-C   478    IFToMM  2002  Characterisation of rotating machinery dynamics within limited frequency intervals using modal analysis  Gutierrez-Wing ES and Ewins DJ   486    IFToMM  2002  On the simultaneous forward and backward whirling of flexible rotors: numerical analysis and experimental verification  Dias Jr M, Idehara SJ, Mesquita ALA and Miranda UA   496    IFToMM  2002  On the application of directional time-frequency distributions to the identification of simultaneous forward and backward whirling in flexible rotors  Miranda UA, Dias Jr M, Mesquita ALA and Idehara SJ   504    IFToMM  2002  Rotordynamic problems of high speed centrifuges  Stelter P and Harms A   512    IFToMM  2002  Coupled non-linear vibrations in 200 MW turbosets  Kicinski J   520    IFToMM  2002  An experimental analysis of rotors on flexible structures  Cavalca KL, Cavalcante PF and Okabe EP   531    IFToMM  2002  The comparison of pressure and velocity fields of squeeze film dampers calculated by the Reynolds and Navier-Stokes Equations  Pochyly F and Malenovsky E   541    IFToMM  2002  A parametric study of the stability of high-speed floating bush journal bearings  Tanaka M   549    IFToMM  2002  Interaction of squeeze film dampers and hole feed systems and its influence on the dynamics of a Jeffcott rotor  Assis Rodrigues F, Thouverez F and Jezequel L   556    IFToMM  2002  Experimental and theoretical study on swirl braked labyrinth seal  Iwatsubo T and Iwasaki Y   564    IFToMM  2002  Optimal design of squeeze film damper using an enhanced genetic algorithm  Kim Y-C, Ahn Y-K and Yang B-S   572    IFToMM  2002  A general nonlinear analytical model of oil-film forces for finite length journal bearings  Zhang W, Zheng TS, Yang JD and Ma JM   580    IFToMM  2002  Perturbation solution of Reynolds equation for finite journal bearings  El-Shafei A   588    IFToMM  2002  Dynamic coefficients of plain annular gas seals – a comparison of experimentally and numerically derived results  Kwanka K, Sobotzik J and Glockner O   599    IFToMM  2002  Dynamics of an over-hung rotor with a disc-type magneto-rheological fluid damper  Zhu C, Robb DA and Ewins   607    IFToMM  2002  Instability and control of a cantilever rotor supported on MR fluid damper and sliding bearing  Wang J and Meng G   615    IFToMM  2002  An unsteady oil-film force model of a bearing with multi-pads for nonlinear dynamic analysis of rotor-bearing systems  Zheng TS, Shen GY and Zhang W   621    IFToMM  2002  Damping and stiffness coefficients of elastomer rings and their optimised application in rotor dynamics: theoretical investigations and experimental validation  Bormann A and Gasch R   628    IFToMM  2002  An efficient calculation method of nonlinear oil film forces in journal bearings  Xia S, Jiao Y, Chen Z, Huang W and Zhang Z   645    IFToMM  2002  Cavitation effects on the stability of a submerged journal bearing  Sawicki JT and Rao TVVLN   652    IFToMM  2002  Load direction effects on measured static and dynamic operating characteristics of tilting pad journal bearings  Brechting R, Prior RJ, Flack RD and Barrett LE   659    IFToMM  2002  Thermoelastohydrodynamic analysis of journal bearings with a generalized 2-D energy equation  He M and Allaire P   666    IFToMM  2002  TEHD modeling of leading edge groove journal bearings  He M, Allaire P, Barrett L and Nicholas J   674    IFToMM  2002  A study of the dynamic behaviour of transmissions sets using epicyclic gear trains  Morais RF and Dedini FG   682    IFToMM  2002  Development of an epicyclic gear train design methodology for two linked EGTs  Dedini FG, Amaral D and Becker M   690    IFToMM  2002  The dynamic modelling of multiple pairs of spur gears in mesh including friction and geometrical errors  Jia S, Howard I and Wang J   698    IFToMM  2002  The application of time-frequency analysis in diagnostics of local damages of toothed gears  Wilk A, Madej H and Lazarz B   706    IFToMM  2002  Multi-domain analysis of rotating machinery  Wettergren HL, Blom OCJ and Jirstrand M   714    IFToMM  2002  Simulation of rotordynamic effects in electric power generators due to electrical system anomalies  Blom OCJ and Wettergren HL   722    IFToMM  2002  The vibration behavior of centrifugal compressor impeller blades in the five-axis CNC flank milling process  Hasemann H, Rautenberg M, Hagelstein D and Sonthipermpoon K   730    IFToMM  2002  Estimation of the rotating stall frequency from rotor frequency and common blade number integer fractions in a four stage axial compressor  Hellmich B, Fischer A, Reissner A, Runkel J and Seume J   737    IFToMM  2002  A review of the origins and current status of rotor dynamics  Nelson FC   745    IFToMM  2002  Evaluation of rotordynamical concepts subjected to rotating unbalance and impulse  Karlberg M and Aidanpaa J-O   752    IFToMM  2002  Rotordynamics of turbomachinery ... looking back ... looking forward  Childs DW   759    IFToMM  2002  Experimental determination of bearing performance of the VentrAssist rotary blood pump  Chung M, Zhang N, Tansley GD and Woodard JC   767    IFToMM  2002  Development and design of traction drive for continuously variable transmission for low power and torque systems  Forti AW and Dedini FG   776    IFToMM  2002  Finite element analysis of rolling contact of two paper machine rolls  Järvenpaa V-M and Keskinen E   784    IFToMM  2002  In-operation modal analysis – application to rotating machinery diagnostics  Uhl T, Lisowski W and Batko W   791    IFToMM  2002  3D inviscid unsteady forces of stator-rotor last steam turbine stage with vibrating blades  Rzadkowski R and Gnesin V   798    IFToMM  2002  Dynamic characteristics of tilting 5-pad journal bearing with asymmetric support of pads  Strzelecki S   807    IFToMM  2002  Inverse problems in rotor dynamics using optimization techniques  Assis EG and Steffen Jr. V   815    IFToMM  2002  Identification of dynamic properties of a turboset rotor from its run down  Balda M   822    IFToMM  2002  A reduced modeling for flexible rotor-bearing systems and its application  Matsushita O, Fujiwara H and Takahashi N   830    IFToMM  2002  The application of modal synthesis method on torsional vibration analysis for rotorbearing system  Zou C-P, Chen D-S and Hua H-X   838    IFToMM  2002  Modal analysis of a large turbine-generator system with foundation effects  Konishi T, Allaire P and Untaroiu C   846    IFToMM  2002  Numerical evaluation of an identification technique for flexibly supported rigid turbomachinery foundations  Feng NS and Hahn EJ   854    IFToMM  2002  Global dynamics of shaft lines rotating in surrounding fluids - application to thin fluid films  Lornage D and Jacquet-Richardet G   862    IFToMM  2002  Identifying resonances in rotating structures with interference diagrams  Ponge-Ferreira W, Nigro FEB and Irretier H   870    IFToMM  2002  Part I – Theoretical model for a synchronous thermal instability operating in overhung rotors  Balbahadur AC and Kirk RG   878    IFToMM  2002  Part II – Case studies for a synchronous thermal instability operating in overhung rotors  Balbahadur AC and Kirk RG   887    IFToMM  2002  Driving shaft bearing for clearing saw  Falth MKE and Wettergren HL   897    IFToMM  2002  Nonstationary oscillations of a nonlinear rotor system with internal resonance during acceleration through critical speeds  Ishida Y, Murakami S and Inoue T   905    IFToMM  2002  Rotor motion during stator contact  Ehehalt U and Markert R   913    IFToMM  2002  Subsynchronous resonance in turbine generators caused by faulty induction machines  Joswig F and Kulig S   921    IFToMM  2002  How interference fits stiffen the flexible rotors of centrifugal compressors  Smalley AJ, Pantermuehl PJ, Hollingsworth JR and Camatti M   928    IFToMM  2002  Theoretical and experimental investigation on the dynamic behaviour of disk blades during sharpening  Carmignani C, Forte P and Rustighi E   936    IFToMM  2002  Flexible rotor supported by viscoelastic foil bearings beyond the bending critical speed  Lee Y-B, Kim T-H, Kim C-H, Lee N-S and Jang G-H   944    IFToMM  2002  Stability and bifurcation analysis of periodically excited rotors supported by hydrodynamic bearings of non-circular cross section  Zapomel J   952    IFToMM  2002  Nonlinear dynamics of multi-disc rotor in dry friction bearings  Zigulic R, Butkovic M and Braut S   960    IFToMM  2002  An approximate model for vibration response of bearing shells of turbo-alternator set  Junghare AS, Modak JP and Kothari AG   976    IFToMM  2002  Study on the bifurcation and chaos behavior of rubbing rotor-stator systems  Yuan HQ, Wang DY, Yang JD, Liu YX and Wen BC   984    IFToMM  2002  Uncertain responses of rotor systems with rubbing  Zhang YM and Wen BC   989    IFToMM  2002  Investigation of self-excited vibrations in flexible labyrinth seals due to instationary pressure fields  Schuck G and Nordmann R   995    IFToMM  2002  Transient vibration prediction for rotors on ball bearings using load-dependent nonlinear bearing stiffness  Fleming DP and Poplawski JV   1003    IFToMM  2002  A study of ball be