| IGTI Papers |
| Conference |
Year |
Paper Title |
Paper Author |
Page Number |
Other |
| IGTI |
1990 |
Experimental Study of the Effect of Dense Spray on Drop Size Measurement by Light Scattering Technology |
J.S. Chin; W.M. Li; Y. Zhang |
|
90-GT-001 |
| IGTI |
1990 |
The Use of 3D Viscous Flow Calculations in the Design and Analysis of Industrial Centrifugal Compressors |
M.V. Casey; P. Dalbert; P. Roth |
|
90-GT-002 |
| IGTI |
1990 |
Energy Considerations in Twin-Fluid Atomization |
A.H. Lefebvre |
|
90-GT-003 |
| IGTI |
1990 |
The Influence of Air/Fuel Ratio and Swirl Number on the Combustion Characteristics of a Model Combustor |
A.F. Bicen; D.G.N. Tse; J.H. Whitelaw |
|
90-GT-004 |
| IGTI |
1990 |
Vibration Analysis of Cracked Turbine and Compressor Blades |
W. Ostachowicz; M. Krawczuk |
|
90-GT-005 |
| IGTI |
1990 |
Experimental Study on Internal Mixing Sonic Flow Air Assist Atomizer for Heavy Oils |
J.S. Chin; L.X. Wang |
|
90-GT-006 |
| IGTI |
1990 |
Experimental Evaluation of Sorbents for Sulfur Control in a Coal-Fueled Gas Turbine Slagging Combustor |
L.H. Cowell; C.S. Wen; R.T. LeCren |
|
90-GT-007 |
| IGTI |
1990 |
Effect of Acceleration on the Heat Transfer Coefficient on a Film Cooled Surface |
H.D. Ammari; N. Hay; D. Lampard |
|
90-GT-008 |
| IGTI |
1990 |
Influence of High Mainstream Turbulence on Leading Edge Film Cooling Heat Transfer |
A.B. Mehendale; J.C. Han |
|
90-GT-009 |
| IGTI |
1990 |
The Influence of Curvature on Film Cooling Performance |
S.G. Schwarz; R.J. Goldstein; E.R.G. Eckert |
|
90-GT-010 |
| IGTI |
1990 |
Advances in the Numerical Analysis of Linearized Unsteady Cascade Flows |
J.M. Verdon; W.J. Usab, Jr. |
|
90-GT-011 |
| IGTI |
1990 |
Three-Dimensional otational Flow in Transonic Turbomachines: Part I-Solution Obtained By sing a Number of S1 Stream Filaments of Revolution and a Central 2 |
C.H. Wu; Z. Wang; H. Chen |
|
90-GT-012 |
| IGTI |
1990 |
Three-Dimensional otational Flow in Transonic Turbomachines: Part II - Full 3D Flow in AS Rotor Obtained by Using a Number of S1 and S2 STream Filaments |
C.H. Wu; X. Zhao; L. Qin |
|
90-GT-013 |
| IGTI |
1990 |
Analysis of Unsteady Compressible Viscous Layers |
G.D. Powers; J.M. Verdon; K.A. Kousen |
|
90-GT-014 |
| IGTI |
1990 |
Inviscid-Viscous Interaction Analysis of Compressor Cascade Performance |
M. Barnett; D.E. Hobbs; D.E. Edwards |
|
90-GT-015 |
| IGTI |
1990 |
Rotating Cavity with Axial Throughflow of Cooling Air: Heat Transfer |
P.R. Farthing; C.A. Long; J.M. Owen; J.R. Pincombe |
|
90-GT-016 |
| IGTI |
1990 |
Rotating Cavity with Axial Throughflow of Cooling Air: Flow Structure |
P.R. Farthing; C.A. Long; J.M. Owen; J.R. Pincombe |
|
90-GT-017 |
| IGTI |
1990 |
Towards Improved Throughflow Capability: Use of 3D Viscous Flow Solvers in a Multistage Environment |
W.N. Dawes |
|
90-GT-018 |
| IGTI |
1990 |
The Calculation of Three Dimensional Viscous Flow Through Multistage Turbines |
J.D. Denton |
|
90-GT-019 |
| IGTI |
1990 |
Secondary Flow Measurements in a Turbine Cascade with High Inlet Turbulence |
D.G. Gregory-Smith; J.G.E. Clark |
|
90-GT-020 |
| IGTI |
1990 |
Thee-Dimensional Wake Decay Inside of a Compressor Cascade and Its Influence on the Downstream Unsteady Flow Field. Part I: Wake Decay Characteristics in the F |
C. Poensgen; H.E. Gallus |
|
90-GT-021 |
| IGTI |
1990 |
Three Dimensional Wake Decay Inside of a Compressor Cascade and Its Influence on the Downstream Unsteady Flow Field. Part II: Unsteady Flow Field Downstream of |
C. Poensgen; H.E. Gallus |
|
90-GT-022 |
| IGTI |
1990 |
Service Temperature Estimation of Turbine Blades Based on Microstructural Observations |
J.M. Aurrecoechea; W.D. Brentnall; J.R. Gast |
|
90-GT-023 |
| IGTI |
1990 |
Parametric and Numerical Study of Fully Developed Flow and Heat Transfer in Rotating Rectangular Ducts |
H. Iacovides; B.E. Launder |
|
90-GT-024 |
| IGTI |
1990 |
Local Heat Transfer in Turbine Disk-Cavities. Part I: Rotor and Stator Cooling with Hub Injection of Coolant |
R.S. Bunker; D.E. Metzger; S. Wittig |
|
90-GT-025 |
| IGTI |
1990 |
Local Heat Transfer in Turbine Disk-Cavities. Part II: Rotor Cooling with Radial Location Injection of Coolant |
R.S. Bunker; D.E. Metzger; S. Wittig |
|
90-GT-026 |
| IGTI |
1990 |
Experimental Measurement of the Vortex Development Downstream of a Lobed Forced Mixer |
W.A. Eckerle; H. Sheibani; J. Awad |
|
90-GT-027 |
| IGTI |
1990 |
Mixing of an Acoustically Excited Air Jet with a Confined Hot Crossflow |
P.J. Vermeulen; P. Grabinski; V. Ramesh |
|
90-GT-028 |
| IGTI |
1990 |
Full Annular Rig Development of the FT8 Gas Turbine Combustor |
T.G. Fox; B.C. Schlein |
|
90-GT-029 |
| IGTI |
1990 |
Status of Topping Combustor Development for Second Generation Fluidized Bed Combined Cycles |
R.V. Garland; P.W. Pillsbury |
|
90-GT-030 |
| IGTI |
1990 |
Influence of a Shroud on Swirler Flow Fields |
H. Eroglu; N.A. Chigier |
|
90-GT-031 |
| IGTI |
1990 |
The Effect of Swirl on the Velocity and Turbulence Fields of a Liquid Spray |
A. Brena De La Rosa; G. Wang; W.D. Bachalo |
|
90-GT-032 |
| IGTI |
1990 |
A Computational Fluid Dynamics and Chemistry Model for Jet Fuel Thermal Stability |
J.L. Krazinski; S.P. Vanka; J.A. Pearce; W.M. Roquemore |
|
90-GT-033 |
| IGTI |
1990 |
Chemical Composition of Exhaust from Aircraft Turbine Engines |
C.W. Spicer; M.W. Holdren; D.L. Smith; D.P. Hughes; M.D. Smith |
|
90-GT-034 |
| IGTI |
1990 |
A Computational Procedure for Difuser-Combustor Flow Interaction Analysis |
K.C. Karki; V.L. Oechsle; H.C. Mongia |
|
90-GT-035 |
| IGTI |
1990 |
Study of Internal Flows in a Mixed-Flow Pump Impeller at Various Tip Clearances Using 3-D Viscous Flow Computations |
A. Goto |
|
90-GT-036 |
| IGTI |
1990 |
Mechanics on the Tip Clearance Loss of Impeller Blades |
Y. Senoo |
|
90-GT-037 |
| IGTI |
1990 |
Mixing in Axial Flow Compressors: Part I-Test Facilities and Measurements in a Four-Stage Compressor |
Y.S. Li; N.A. Cumpsty |
|
90-GT-038 |
| IGTI |
1990 |
Mixing Axial Flow Compressors: Part II Measurements in a Single Stage Compressor and a Duct |
Y.S. Li; N.A. Cumpsty |
|
90-GT-039 |
| IGTI |
1990 |
Limit Cycle Vibration Analysis of a Long Rotating Cylinder Partially Filled with Liquid |
J. Colding-Jorgensen |
|
90-GT-040 |
| IGTI |
1990 |
Heat ransfer and Aerodynamics of a High Rim Speed Turbine Nozzle Guide Vane ested in the RAE Isentropic Light Piston Cascade (ILPC) |
S.P. Harasgama; E.T. Wedlake |
|
90-GT-041 |
| IGTI |
1990 |
Navier-Stokes Analysis of Turbine Blade Heat Transfer |
R.J. Boyle |
|
90-GT-042 |
| IGTI |
1990 |
Film Cooling Effectiveness Downstream of Single Row of Holes with Variable Density Ratio |
A.K. Sinha; D.G. Bogard; M.E. Crawford |
|
90-GT-043 |
| IGTI |
1990 |
Gas Turbine Film Cooling: Flowfield Due to a Second Row of Holes |
A.K. Sinha; D.G. Bogard; M.E. Crawford |
|
90-GT-044 |
| IGTI |
1990 |
Effects f Vortices with Different Circulations on Heat Transfer and Injectant ownstream of a Single Film-Cooling Hole in a Turbulent Boundary ayer |
P.M. Ligrani; C.S. Subramanian; D.W. Craig; P. Kaisuwan |
|
90-GT-045 |
| IGTI |
1990 |
Effect of Incidence on Wall Heating Rates and Aerodynamics on a Film Cooled Transonic Turbine Blade |
C. Camci; T. Arts |
|
90-GT-046 |
| IGTI |
1990 |
Fabrication and Development of Axial Silicon Nitride Gas Turbine Rotors |
G. Bandyopadhyay; K.W. French; D.J. Sordelet; K.D. Moergenthaler |
|
90-GT-047 |
| IGTI |
1990 |
Design of Ceramic Gas Turbine Components |
G. Stuermer; M. Fundus; A. Schulz; S. Wittig |
|
90-GT-048 |
| IGTI |
1990 |
Experimental Study of the Swirling Flow in the Volute of a Centrifugal Pump |
T. Elholm; E. Ayder; R. Van Den Braembussche |
|
90-GT-049 |
| IGTI |
1990 |
Two Dimensional Potential Flow Analysis of a Laboratory Centrifugal Pump |
S.M. Miner; R.D. Flack; P.E. Allaire |
|
90-GT-050 |
| IGTI |
1990 |
Turbulent Combustion Properties Behind a Confined Conical Stabilizer |
J.C. Pan; W.J. Schmoll; D.R. Ballal |
|
90-GT-051 |
| IGTI |
1990 |
A Method for the Design of Optimum Annular Diffusers of Canted Configurations |
R.C. Adkins; M.H. Wardle |
|
90-GT-052 |
| IGTI |
1990 |
Heat Transfer Measurements and Calculations in Transitionally Rough Flow |
M.H. Hosni; H.W. Coleman; R.P. Taylor |
|
90-GT-053 |
| IGTI |
1990 |
Acoustic Design of Lightweight Gas Turbine Enclosures |
R.D. Rawlinson |
|
90-GT-054 |
| IGTI |
1990 |
The Influence of Blade Lean on Turbine Losses |
S. Harrison |
|
90-GT-055 |
| IGTI |
1990 |
Three-Dimensional Flow in an Axial Turbine. Part 1 - Aerodyanamic Mechanisms |
H.D. Joslyn; R.P. Dring |
|
90-GT-056 |
| IGTI |
1990 |
Three-Dimensional Flow in an Axial Turbine. Part 2- Profile Attenuation |
H.D. Joslyn; R.P. Dring |
|
90-GT-057 |
| IGTI |
1990 |
Recent Test Results in the Direct Coal-Fired 80 MW Combustion Turbine Program |
R.L. Bannister; P.W. Pillsbury; R.C. Diehl; P.J. Loftus |
|
90-GT-058 |
| IGTI |
1990 |
Coal-Fueled Two-Stage Slagging Combustion Island and Cleanup System for Gas Turbine Application |
L.H. Cowell; A.M. Hasen; R.T. LeCren; M.D. Stephenson |
|
90-GT-059 |
| IGTI |
1990 |
Announcing the LM1600 Marine Gas Turbine Module |
R. Latterman; C. Beiner |
|
90-GT-060 |
| IGTI |
1990 |
Full Coverage Discrete Hole Film Cooling: The Influence of the Number of Holes and Pressure Loss |
G.E. Andrews; A.A. Asere; M.L. Gupta; M.C. Mkpadi; A. Tirmahi |
|
90-GT-061 |
| IGTI |
1990 |
Numerical Investigation of the Three-Dimensional Field in the Near Hole Region of a Film Cooled Turbine Vane |
X. Coudray |
|
90-GT-062 |
| IGTI |
1990 |
Thermogasdynamic Effects of the Engine Turbines with the Contra-Rotating Turbines |
Y.V. Sotsenko |
|
90-GT-063 |
| IGTI |
1990 |
An Analysis of the Viscous Flow Through a Compact Radial Turbine by the Average Passage Approach |
J.D. Heidmann; T.A. Beach |
|
90-GT-064 |
| IGTI |
1990 |
Performance Prediction of Subsonic Separated Cascades |
N. Yazigi; M.H. Charlier; G.A. Gerolymos; J. Chauvin |
|
90-GT-065 |
| IGTI |
1990 |
Design Methodology For Splittered Axial Compressors Rotors |
K.L. Tzuoo; S.S. Hingorani; A.K. Sehra |
|
90-GT-066 |
| IGTI |
1990 |
Application of an Inverse Design Procedure to Axial Compressor Blading |
M. Zedan; A.K. Sehra |
|
90-GT-067 |
| IGTI |
1990 |
Three-Dimensional Prescribed Velocity Blade Row Design |
V. Molnar; F. Ridzon; V. Adame |
|
90-GT-068 |
| IGTI |
1990 |
Gas Turbine Power Plant Possibilities with a Nuclear Heat Source-Closed And Open Cycle Variants |
C.F. McDonald |
|
90-GT-069 |
| IGTI |
1990 |
Solar Dynamic CBC Power for Space Station Freedom |
W.B. Harper, Jr., R.V. Boyle; C.T. Kudija |
|
90-GT-070 |
| IGTI |
1990 |
Combustion Performance of a Water-Injected MS7001E Gas Turbine Operating at a NOx Emission Level of 25 ppmvd |
D.O. Fitts; R.A. Symonds; E.R. Western |
|
90-GT-071 |
| IGTI |
1990 |
Development of a New 25 MW High Efficiency Heavy-Duty Gas Turbine H-25 |
H. Urushidani; T. Sasada; M. Wada; K. Kawaike |
|
90-GT-072 |
| IGTI |
1990 |
Aerodynamic Analysis of a Two Stage Transonic Compressor |
K.D. Broichhausen; P. Harster |
|
90-GT-073 |
| IGTI |
1990 |
The Turbine Regime of a Rear Axial Compressor Stage |
V. Cyrus |
|
90-GT-074 |
| IGTI |
1990 |
LDV Measurements of Turbulent Stresses in Radial Turbine Guide Vanes |
H. Eroglu; W. Tabakoff |
|
90-GT-075 |
| IGTI |
1990 |
Viscous Flow Computations in Turbomachine Cascades |
P.A. Chevrin; C. Vuillez |
|
90-GT-076 |
| IGTI |
1990 |
Viscous Flow Field Calculations in High-Loaded Centrifugal Compressor Diffusers |
I. Teipel; A. Wiedermann |
|
90-GT-077 |
| IGTI |
1990 |
Gas Turbine Rotar Blade Film Cooling with and without Simulated NGV Shock Waves and Wakes |
M.J. Rigby; A.B. Johnson; M.L.G. Oldfield |
|
90-GT-078 |
| IGTI |
1990 |
Development of Materials and Coating Processes for High Temperature Heavy Duty Gas Turbines |
S. Nakamura; Y. Fukui; M. Siga; Y. Kojima; S. Yamaguchi |
|
90-GT-079 |
| IGTI |
1990 |
The LCF Behavior of Several Solid Solution Strengthened Alloys Used in Gas Turbine Engines |
S.K. Srivastava; D.L. Klarstrom |
|
90-GT-080 |
| IGTI |
1990 |
Parametric Experiments on Coaxial Airblast Jet Atomization |
Z. Farago; N.A. Chigier |
|
90-GT-081 |
| IGTI |
1990 |
Experimental Studies of Reactive and Non-Reactive Flows in Dump Combustors |
A.S. Nejad; S.A. Ahmed; L.A. Roe; R.S. Gabruk |
|
90-GT-082 |
| IGTI |
1990 |
An Ultra-Low NOx Combustion SYstem for a 3.5 MW Industrial Gas Turbine |
C. Wilkes; H.C. Mongia, C.B. Santanam |
|
90-GT-083 |
| IGTI |
1990 |
Further Development of an Improved Pulse, Pressure Gain, Gas Turbine Combustor |
J.A.C. Kentfield; L.C.V. Fernandes |
|
90-GT-084 |
| IGTI |
1990 |
Experimental Evaluation of a Low Emissions, Variable Geometry, Small Gas Turbine Combustor |
K.O. Smith; M.H. Samii; H.K. Mak |
|
90-GT-085 |
| IGTI |
1990 |
A Study of Isothermal Flow Past a Confined Bluff Body |
M.K.Y. Lai; M.V. D'Souza; I.G. Campbell; G.J. Smallwood; D.R. Snelling |
|
90-GT-086 |
| IGTI |
1990 |
Ultra-Low NOx Rich-Lean Combustion |
N.K. Rizk; H.C. Mongia |
|
90-GT-087 |
| IGTI |
1990 |
An Anlysis of Pressure Swirl and Pure Airblast Atomization |
C-P. Mao; S.G. Chuech; A.J. Przekwas |
|
90-GT-088 |
| IGTI |
1990 |
Evaluation of a Catalytic Combustor in a Gas Turbine-Generator Unit |
S. Kajita; Y. Tanaka; J. Kitajima |
|
90-GT-089 |
| IGTI |
1990 |
Flow Behavior in a Dump Diffuser with Distorted Flow at the Inlet |
S. Honami; T. Morioka |
|
90-GT-090 |
| IGTI |
1990 |
Measuring Rotor and Blade Dynamics Using an Optical Blade Tip Sensor |
H.R. Simmons; K.E. Brewer; D.L. Michalsky; A.J. Smalley |
|
90-GT-091 |
| IGTI |
1990 |
The Effect of a Turbulent Wake on the Stagnation Point Part I: Skin Friction Results |
D.E. Wilson; A.J. Hanford |
|
90-GT-092 |
| IGTI |
1990 |
Model Adjustment of Small Rotors for High Speed Gas Turbines |
A. Delbez; D. Gay; B. Christian |
|
90-GT-093 |
| IGTI |
1990 |
Concave-Wall aminar Heat Transfer and Goertler Vortex Structure: Effects of re-Curvature Boundary Layer and Favourable Pressure Gradients |
R.I. Crane; H. Umur |
|
90-GT-094 |
| IGTI |
1990 |
Prediction and Measurement of Film Cooling Effectiveness for a First-Stage Turbine Vane Shroud |
D. Granser; T. Schulenberg |
|
90-GT-095 |
| IGTI |
1990 |
Development and Testing of an Axial Silicon Nitride Gas Turbine Rotor |
K.D. Moergenthaler; H. Hempel; L. Jungbauer; M. Stute; H. Wiest; K. Wunderlich |
|
90-GT-096 |
| IGTI |
1990 |
Testing of Ceramic Components in the Daimler-Benz Research Gas Turbine PWT 110 |
M. Stute; H. Burger; M. Griguscheit; E. Holder; K.D. Moergenthaler; F. Neubrand; M. Radloff |
|
90-GT-097 |
| IGTI |
1990 |
Reliability Analysis of Ceramics Using the Ceram Computer Program |
J. Lamon |
|
90-GT-098 |
| IGTI |
1990 |
A Study on the Blade Shape Influence on Flow Distribution and Performance in Centrifugal Compressor Rotors |
R. Tuccillo; A. Senatore |
|
90-GT-099 |
| IGTI |
1990 |
Recent Progress in Research Pertaining to Estimates of Gas-Side Heat Transfer in an Aircraft Gas Turbine |
R.W. Graham |
|
90-GT-100 |
| IGTI |
1990 |
Low-Toxic Method of Fuel Firing in Gas Turbine Micro-Flame Combustors |
A.V. Sudarev |
|
90-GT-101 |
| IGTI |
1990 |
Radial Swirlers with Peripheral Fuel Injection for Ultra-Low NOx Emissions |
H.S. Al Kabie; G.E. Andrews |
|
90-GT-102 |
| IGTI |
1990 |
The Mechanism of Fouling and the Cleaning Technique in Application to Flow Parts of the Power Generation Plant Compressors |
A.D. Mezheritsky; A.V. Sudarev |
|
90-GT-103 |
| IGTI |
1990 |
Cogeneration Plant Machinery Design for Maintenance and Reliability |
C.E. Zirkelback |
|
90-GT-104 |
| IGTI |
1990 |
Calculating NH3 Slip for SCR Equipped Cogeneration Units |
C.M. Anderson; J.A. Billings |
|
90-GT-105 |
| IGTI |
1990 |
Cogeneration Operating Experience Using Sixteen Industrial Grade Combustion Turbines |
R.M. Edgell; J.C. Henneforth |
|
90-GT-106 |
| IGTI |
1990 |
Field Evaluation of On-Line Compressor Cleaning in Heavy Duty Industrial Gas Turbines |
G.L. Haub; W.E. Hauhe, Jr. |
|
90-GT-107 |
| IGTI |
1990 |
Basic Analysis of Counter-Rotating Turbines |
R. Cai; G. Fang; W. Wu |
|
90-GT-108 |
| IGTI |
1990 |
Forcing Function Effects on Rotor Periodic Aerodynamic Response |
S.R. Manwaring; S. Fleeter |
|
90-GT-109 |
| IGTI |
1990 |
Experimental and Computed Performance Characteristics of High Speed Silicon Nitride Hybrid Ball Bearings |
G.W. Hosang |
|
90-GT-110 |
| IGTI |
1990 |
Assessment of Hot Gas Cleanup Technologies in Coal-Fired Gas Turbines |
E.L. Parsons, Jr.; H.A. Webb; C.M. Zeh |
|
90-GT-111 |
| IGTI |
1990 |
Combined Cycle Enhancement |
H. Jericha; F. Hoeller |
|
90-GT-112 |
| IGTI |
1990 |
Design of Robust Controllers for Gas Turbine Engines |
D.E. Moellenhoff; S.V. Rao; C.A. Skarvan |
|
90-GT-113 |
| IGTI |
1990 |
Effect of Particle Size Distribution on Particle Dynamics and Blade Erosion in Axial Flow Turbines |
W. Tabakoff; A. Hamed; M. Metwally |
|
90-GT-114 |
| IGTI |
1990 |
Determination of Cycle Configuration of Gas Turbines and Aircraft Engines by Optimization Procedure |
Y. Tsujikawa; M. Nagaoka |
|
90-GT-115 |
| IGTI |
1990 |
Introduction o the Basic Technology of Stealth Aircraft. Part 1: Basic onsiderations and Aircraft Self-emitted Signals-(Passive onsiderations) |
D. Howe |
|
90-GT-116 |
| IGTI |
1990 |
Introduction to the Basic Technology of Stealth Aircraft Part 2: Illumination by the Enemy-Active Considerations |
D. Howe |
|
90-GT-117 |
| IGTI |
1990 |
SNECMA M88 Engine Development Status |
J.C. Corde |
|
90-GT-118 |
| IGTI |
1990 |
EJ200 - The Engine for the New European Fighter Aircraft |
R.J. Lane; J. Behenna |
|
90-GT-119 |
| IGTI |
1990 |
Laminar Boundary Layer Interaction with an Unsteady Passing Wake |
D.E. Paxson; R.E. Mayle |
|
90-GT-120 |
| IGTI |
1990 |
The Effect of Incident Wake Conditions on the Mean Heat Transfer of an Airfoil |
K. Dullenkopf; A. Schulz; S. Wittig |
|
90-GT-121 |
| IGTI |
1990 |
Dynamic Control of Centrifugal Compressor Surge Using Tailored Structures |
D.L. Gysling; J. Dugundji; E.M. Greitzer; A.H. Epstein |
|
90-GT-122 |
| IGTI |
1990 |
Active Stabilization of Centrifugal Compressor Surge |
J.E. Pinsley; G.R. Guenette; A.H. Epstein; E.M. Greitzer |
|
90-GT-123 |
| IGTI |
1990 |
Investigation f the Flow at the Exit of an Unshrouded Centrifugal Impeller and omparison with the "Classical" Jet-Wake Theory |
K.-H. Rohne; M. Banzhaf |
|
90-GT-124 |
| IGTI |
1990 |
Integrity Assessments of Components in the Creep Range |
R.K. Penny; M.A. Weber |
|
90-GT-125 |
| IGTI |
1990 |
Analytical & Experimental Simulation of Fan Blade Behaviour & Damage Under Bird Impact |
H.C. Teichman; R.N. Tadros |
|
90-GT-126 |
| IGTI |
1990 |
Tip Leakage Flow in Axial Compressors |
J.A. Storer; N.A. Cumpsty |
|
90-GT-127 |
| IGTI |
1990 |
Centrifugal Compressor Impeller Aerodynamics (an Experimental Investigation) |
H.D. Joslyn; J.J. Brasz; R.P. Dring |
|
90-GT-128 |
| IGTI |
1990 |
Wake Measurements and Loss Evaluation in a Controlled Diffusion Compressor Cascade |
R.P. Shreeve; Y. Elazar; J.W. Dreon; A. Baydar |
|
90-GT-129 |
| IGTI |
1990 |
Similarity Behavior in Transitional Boundary Layers Over a Range of Adverse Pressure Gradients and Turbulence Levels |
J.P. Gostelow; G.J. Walker |
|
90-GT-130 |
| IGTI |
1990 |
Rim Seal Experiments and Analysis for Turbine Applications |
W.A. Daniels; B.V. Johnson; D.J. Graber; R.J. Martin |
|
90-GT-131 |
| IGTI |
1990 |
The Effects of Wake Mixing on Compressor Aerodynamics |
R.P. Dring; D.A. Spear |
|
90-GT-132 |
| IGTI |
1990 |
Unsteady Radial Transport in a Transonic Compressor Stage |
P.A. Kotidis; A.H. Epstein |
|
90-GT-133 |
| IGTI |
1990 |
Pressure Losses in Combining Subsonic Flows Through Branched Ducts |
N.I. Abou-Haidar; S.L. Dixon |
|
90-GT-134 |
| IGTI |
1990 |
Computation of Heat Transfer in Rotating Cavities Using a Two-Equation Model of Turbulence |
A.P. Morse; C.L. Ong |
|
90-GT-135 |
| IGTI |
1990 |
A Numerical Study of the Influence of Disc Geometry on the Flow and Heat Transfer in a Rotating Cavity |
B.L. Lapworth; J.W. Chew |
|
90-GT-136 |
| IGTI |
1990 |
More on the Turbulent-Strip Theory for Wake-Induced Transition |
R.E. Mayle; K. Dullenkopf |
|
90-GT-137 |
| IGTI |
1990 |
Heat Transfer Measurements in Rectangular Channels with Orthogonal-Mode Rotation |
W.D. Morris; G. Ghavami-Nasr |
|
90-GT-138 |
| IGTI |
1990 |
Cogenerative, Direct Exhaust Integration of Gas Turbines in Ethylene Production |
D.H. Cooke; W.D. Parizot |
|
90-GT-139 |
| IGTI |
1990 |
Design and Testing of a Controlled Diffusion Airfoil Cascade for Industrial Axial Flow Compressor Application |
W. Steinert; B. Eisenburg; H. Starken |
|
90-GT-140 |
| IGTI |
1990 |
Cooling-Air Injection into Secondary Flow and Loss Fields Within a Linear Turbine Cascade |
A. Yamamoto; Y. Kondo; R. Murao |
|
90-GT-141 |
| IGTI |
1990 |
The Role of Primary Jets in the Dome Region Aerodynamics of a Model Can Combustor |
C.D. Richards; G.S. Samuelsen |
|
90-GT-142 |
| IGTI |
1990 |
Design and Development of a Research Combustor for Lean Blowout Studies |
G.J. Sturgess; D.G. Sloan; A.L. Lesmerises; S.P. Heneghan; D.R. Ballal |
|
90-GT-143 |
| IGTI |
1990 |
Jet Shear Layer Turbulent Diffusion Flames for Ultra-Low NOx Emissions |
A.F. Al-Shaikhly; G.E. Andrews; C.O. Aniagolu |
|
90-GT-144 |
| IGTI |
1990 |
Industrial RB211-15 Years of History and Development |
P.E. Soinne; R.J. Stephens |
|
90-GT-145 |
| IGTI |
1990 |
Impeller Flow Field Measurement and Analysis |
J.R. Fagan; S. Fleeter |
|
90-GT-146 |
| IGTI |
1990 |
The Influence of Inlet Swirl Distortions on the Performance of a Jet Propulsion Two-Stage Axial Compressor |
W. Pazur; L. Fottner |
|
90-GT-147 |
| IGTI |
1990 |
Turbine Preliminary Design Using Artificial Intelligence and Numerical Optimization Techniques |
S.S. Tong; B.A. Gregory |
|
90-GT-148 |
| IGTI |
1990 |
On The Leading Edge: Combining Maturity and Advanced Technology on the F404 Turbofan Engine |
S.F. Powel, IV |
|
90-GT-149 |
| IGTI |
1990 |
Assessment of Unsteady Flows in Turbines |
O.P. Sharma; G.F. Pickett; R.H. Ni |
|
90-GT-150 |
| IGTI |
1990 |
Compressor Drum Aerodynamic Experiments nd Analysis with Coolant Injected at Selected Locations |
B.V. Johnson; W.A. Daniels; E.J. Kawecki; R.J. Martin |
|
90-GT-151 |
| IGTI |
1990 |
The Development of Axial Turbine Leakage Loss for Two Profiled Tip Geometries Using Linear Cascade Data |
J.P. Bindon; G. Morphis |
|
90-GT-152 |
| IGTI |
1990 |
Similarity Analysis of Compressor Tip Clearance Flow Structure |
G.T. Chen; E.M. Greitzer; C.S. Tan; F.E. Marble |
|
90-GT-153 |
| IGTI |
1990 |
Prediction of Tip-Leakage Losses in Axial Turbines |
M.I. Yaras; S.A. Sjolander |
|
90-GT-154 |
| IGTI |
1990 |
Experimental nd Numerical Investigation of Three-Dimensional Viscous Flows and ortex Motion Inside an Annular Compressor Blade Row |
H.E. Gallus; H.D. Schulz; C. Hah |
|
90-GT-155 |
| IGTI |
1990 |
Rotating Waves As A Stall Inception Indication in Axial Compressors |
V.H. Garnier; A.H. Epstein; E.M. Greitzer |
|
90-GT-156 |
| IGTI |
1990 |
Detection of a Rotating Stall Precursor in Isolated Axial Flow Compressor Rotors |
M. Inoue; M. Kuroumaru; T. Iwamoto; Y. Ando |
|
90-GT-157 |
| IGTI |
1990 |
Passive Control of Unstable Characteristics of a High Specific Speed Diagonal-Flow Fan by an Annular Wing |
K. Kaneko; M. Inoue; T. Setoguchi |
|
90-GT-159 |
| IGTI |
1990 |
Essential Ingredients for the Computation of Steady and Unsteady Blade Boundary Layers |
H.M. Jang; J.A. Ekaterinaris; M.F. Platzer; T. Cebeci |
|
90-GT-160 |
| IGTI |
1990 |
Secondary Flow and Loss Distribution in a Radial Compressor with Untwisted Backswept Vanes |
G. Sipos |
|
90-GT-161 |
| IGTI |
1990 |
Second Generation Low-Emission Combustors for ABB Gas Turbines: Burner Development and Tests at Atmospheric Pressure |
Th. Sattelmayer; M.P. Felchlin; J. Haumann; J. Hellat; D. Styner |
|
90-GT-162 |
| IGTI |
1990 |
Repowering of Thermal Power Plants by Means of a Closed Cycle MHD Topper |
O. Bellofatto; C.A. Borghi |
|
90-GT-163 |
| IGTI |
1990 |
Flexibility amd Adaptability of Closed Brayton Cycles Associated with Low Power Level Space Nuclear Heat Sources |
Z.P. Tilliette; F.O. Carre; E. Proust |
|
90-GT-164 |
| IGTI |
1990 |
Rolling Wear of Silicon Nitride Bearing Materials |
J.W. Lucek |
|
90-GT-165 |
| IGTI |
1990 |
Performance of Silicon Nitride (Si3N4) Components in Aerospace Bearing Applications |
F.J. Ebert |
|
90-GT-166 |
| IGTI |
1990 |
The F109-GA-100 Engine Designed Specifically for Trainer Use |
H.F.W. Maertins; T.W. Bruce |
|
90-GT-167 |
| IGTI |
1990 |
The Particle-Wall, Normal-Inmpact Collision Coefficient in the Presence of a Liquid Film |
D.P. Georgiou; G. Paleos |
|
90-GT-168 |
| IGTI |
1990 |
Coal Mineral Matter Transformation During Combustion and Its Implications for Gas Turbine Blade Erosion |
S. Rajan; J.K. Raghavan |
|
90-GT-169 |
| IGTI |
1990 |
A GCC Power Plant with Methanol Storage for Intermediate-Load Duty |
J.A. Paffenbarger |
|
90-GT-170 |
| IGTI |
1990 |
Second-Law Analysis of Fluidized-Bed Steam Generators |
G. Bidini; C. Grimaldi; G. Manfrida |
|
90-GT-171 |
| IGTI |
1990 |
Stealth Aircraft-History Technology and Outlook Part 2: Future Programs and Prospects |
B. Sweetman |
|
90-GT-172 |
| IGTI |
1990 |
A Simple and Reliable Combustion System |
B.Becker; F. Bonsen; G. Simon |
|
90-GT-173 |
| IGTI |
1990 |
Combustor Exit Temperature Distortion Effects on Heat Transfer and Aerodynamics Within a Rotating Turbine Blade Passage |
S.P. Harasgama |
|
90-GT-174 |
| IGTI |
1990 |
Unsteady Heat Transfer Measurements on a Rotating Gas Turbine Blade |
M.A. Hilditch; R.W. Ainsworth |
|
90-GT-175 |
| IGTI |
1990 |
Technical nd Other Considerations for the Selection of Inlet Air Filtration ystems for High-Efficiency Industrial Combustion Turbines |
C.H. Goulding; M.G. Rasmussen; F.M. Fritz, Jr. |
|
90-GT-176 |
| IGTI |
1990 |
A New Air Filtration System Concept for Space Limited Applications and Retrofits |
L. Cuvelier; M.D. Belcher |
|
90-GT-177 |
| IGTI |
1990 |
Large "Single Blade" Diverters and Beyond |
R.N. Heller; A.F. Squirrell; T.H. Hearnden; R.G. Allshouse |
|
90-GT-178 |
| IGTI |
1990 |
Direct Heat Cogeneration Applications for Kaolin Producers |
J.P. Hill |
|
90-GT-179 |
| IGTI |
1990 |
Improvements in Incinerators by Means of Gas Turbine Based Cogen Systems |
I.T. Wiekmeijer |
|
90-GT-180 |
| IGTI |
1990 |
Energy Conservation with Catalytic Cracking in the Refinery |
Y.S.H. Najjar |
|
90-GT-181 |
| IGTI |
1990 |
Operating Experience in Refinery Application of the 13MW Heavy Duty MF-111 Gas Turbine Engine |
J. Masada; I. Fukue |
|
90-GT-182 |
| IGTI |
1990 |
Lubrication Oil Reservior Mist Elimination |
R.D. Belden |
|
90-GT-183 |
| IGTI |
1990 |
A Comparison of Forming Technologies for Ceramic Gas-Turbine Engine Compenents |
R.R. Hengst; D.N. Heichel; J.E. Holowczak; A.P. Taglialavore; B.J. McEntire |
|
90-GT-184 |
| IGTI |
1990 |
Fabrication of ATTAP Ceramic Turbine Components |
R.W. Ohnsorg; J.E. Funk; H.A. Lawler |
|
90-GT-185 |
| IGTI |
1990 |
Developments in Injection Molding Silicon Nitride Turbine Components |
J. Neil; G. Bandyopadhyay; D.J. Sordelet; F.M. Mahoney |
|
90-GT-186 |
| IGTI |
1990 |
A Contribution to Designing a Radial Flow Gas Turbine Stage |
F.S. Bhinder |
|
90-GT-187 |
| IGTI |
1990 |
Transient Performance and Behaviour of Gas Turbine Engines |
G. Torella |
|
90-GT-188 |
| IGTI |
1990 |
Flight Development of the RTM 322 Engine |
P. Sewell; P.E. Scears |
|
90-GT-189 |
| IGTI |
1990 |
An Analytical Approach to Reliability Failure Forecasting and Product Quality |
J.L. Byers |
|
90-GT-190 |
| IGTI |
1990 |
Probabilistic Analysis of Mistuned Bladed Disks: A Combined Closed Form-Perturbation Approach |
M.P. Mignolet; K.R. Christensen |
|
90-GT-191 |
| IGTI |
1990 |
VATEMP: The Variable Area Turbine Engine Matching Program |
J.E.A. Roy-Aikins; J.R. Palmer |
|
90-GT-192 |
| IGTI |
1990 |
Advanced Sequential Linearization for Real Time Simulation of a Marine Gas Turbine |
D.L. Smith; S.D. Metz |
|
90-GT-193 |
| IGTI |
1990 |
Control System Design-Gas Turbine Machinery: The Use of a Corporate Model for Control System Design |
S. Girolami |
|
90-GT-194 |
| IGTI |
1990 |
New Generation of the Small Turboshaft and Turboprop Engines in the U.S.S.R. |
B.A. Ponomariov |
|
90-GT-195 |
| IGTI |
1990 |
A Small Gas Turbine for Drone Aircraft-Design Philosophy |
J.R. Barbosa; A.S. Takeda; J.F.C. Monteiro; M.T. Mendonca; K.W. Ramsden |
|
90-GT-196 |
| IGTI |
1990 |
Gas Turbine with Intermediate Heat Exchanger for Flight Application |
J. Shapiro; A. Levy |
|
90-GT-197 |
| IGTI |
1990 |
A Fully Compressible Three Dimensional Inverse Design Method Applicable to Radial and Mixed Flow Turbomachines |
M. Zangeneh; W.R. Hawthrone |
|
90-GT-198 |
| IGTI |
1990 |
The Application of Active Magnetic Bearings to a Power Turbine |
G.E. Brailean; W.M. Grasdal; V. Kulle; C.P. Oleksuk; R.A. Peterson |
|
90-GT-199 |
| IGTI |
1990 |
Development of Corrosion Resistant Coatings for Marine Gas Turbine Applications |
B.A. Nagaraj; D.J. Wortman; A.F. Maricocchi; J.S. Patton; R.L. Clarke |
|
90-GT-200 |
| IGTI |
1990 |
Laser Surface Melting of Thermally Sprayed Coatings and Effects on the Erosion Behaviours of Coatings |
J.S. Sun |
|
90-GT-201 |
| IGTI |
1990 |
Innovations in Refurbishing Gas Turbine Components |
C.F. Walker; J.S. Cosart |
|
90-GT-202 |
| IGTI |
1990 |
Design and Performance Features of the Marine LM1600 Gas Turbine |
J.M. Thames; H.B. Stueber; C.T. Vincent |
|
90-GT-203 |
| IGTI |
1990 |
Garrett's Turboshaft Engines and Technologies for 1990's |
T.D. Pyle; D.R. Aldrich |
|
90-GT-204 |
| IGTI |
1990 |
Analytical Statistics of Forced Response of a Mistuned Bladed Disk Assembly in Subsonic Flow |
S. Chen; A. Sinha |
|
90-GT-205 |
| IGTI |
1990 |
High Temperature Corrosion Resistance of Mechanically Alloyed Products in Gas Turbine Environments |
G.D. Smith; J.J. Fischer |
|
90-GT-206 |
| IGTI |
1990 |
An Experimental Investigation of Loss Reduction with Riblets on Cascade Blade Surfaces and Isolated Airfoils |
F.Chen; Y.P. Tang; M.Z. Chen |
|
90-GT-207 |
| IGTI |
1990 |
Effects of Surface Roughness, Freestream Turbulence, and Incident Angle on the Performance of a 2-D Compressor Cascade |
W.C. Elrod; P.I. King; E.M. Poniatowski |
|
90-GT-208 |
| IGTI |
1990 |
The Interaction Between the Axial Compressor and the Downstream Distorting Component |
G.C. Tang |
|
90-GT-209 |
| IGTI |
1990 |
An Investigation of the Dynamic Characteristic of Axial Flow Compressors |
G.C. Tang; B. Hu; H.M. Zhang |
|
90-GT-210 |
| IGTI |
1990 |
Basic Features of Speed Induced Transient Behaviour of Axial Flow Compressors |
G.C. Tang |
|
90-GT-211 |
| IGTI |
1990 |
Flowfield Calculation in Compressor Operating with Distorted Inlet Flow |
H. Joubert |
|
90-GT-212 |
| IGTI |
1990 |
Centrifugal Compressor Impeller Aerodynamics (A Numerical Investigation) |
D.J. Dorney; R.L. Davis |
|
90-GT-213 |
| IGTI |
1990 |
Measured and Predicted Effects of Inlet Distortion on Axial Compressors |
J.P. Longley |
|
90-GT-214 |
| IGTI |
1990 |
Inlet Flow Distortion Effects on Rotating Stall |
J. Fortin; W.C. Moffatt |
|
90-GT-215 |
| IGTI |
1990 |
Experimental Investigation of the Stalled Flow in a Centrifugal Pump-Turbine with Vaned Diffuser |
M. Ubaldi; P. Zunino |
|
90-GT-216 |
| IGTI |
1990 |
Flow Visualization in a Simulated Brush Seal |
M.J. Braun; R.C. Hendricks; V. Canacci |
|
90-GT-217 |
| IGTI |
1990 |
Wake Mixing Improvements in a Linear Compressor Cascade with Crenulated Trailing Edges |
J.L. Veesart; P.I. King; W.C. Elrod; A.J. Wennerstom |
|
90-GT-218 |
| IGTI |
1990 |
Heat Transfer from a Rotating Disc |
G.H. Dibelius; M. Heinen |
|
90-GT-219 |
| IGTI |
1990 |
Industrial Design Optimization of Small and Large Size Axial Turbines |
A. Massardo; A. Satta |
|
90-GT-220 |
| IGTI |
1990 |
The Effect of Low Reynolds Number on Straight Compressor Cascades |
J. Citavy; J. Jilek |
|
90-GT-221 |
| IGTI |
1990 |
A Boundary Layer Transition Correlation For Concave Surfaces |
F. Hachem; M.W. Johnson |
|
90-GT-222 |
| IGTI |
1990 |
Aerothermal Boundary Layer Computation Including Strong Viscous-Inviscid Flow Interaction |
P. Kulisa; F. Leboeuf; P. Klinger; J. Bernard |
|
90-GT-223 |
| IGTI |
1990 |
An Engine Demonstration of Active Surge Control |
J.E. Ffowcs Williams; W.R. Graham |
|
90-GT-224 |
| IGTI |
1990 |
Analysis f Experimental Time-Dependent Blade Surface Pressures from an scillating Turbine Cascade with the Influence Coefficient ehcnique |
T.H. Fransson |
|
90-GT-225 |
| IGTI |
1990 |
Numerical rediction of Film Cooling Effectiveness and the Associated Aerodynamic osses with a Three-Dimensional Calculation Procedure |
G.H. Dibelius; R. Pitt; B. Wen |
|
90-GT-226 |
| IGTI |
1990 |
Prediction of the Aerodynamic and Thermal Environment in Turbines |
L.W. Griffin; K.A. Belford |
|
90-GT-227 |
| IGTI |
1990 |
Vortex Control Over End Wall Flow in Compressor Cascades |
Y.P. Tang; M.Z. Chen |
|
90-GT-228 |
| IGTI |
1990 |
Energy Exchange and Secondary Losses Prediction in High Speed Axial and Radial Compressors |
J.K. Kaldellis; P.D. Ktenidis; D.E. Kodossakis |
|
90-GT-229 |
| IGTI |
1990 |
An Interactive System to Integrate the Design, Analysis, and Manufacture of Centrifugal Compressor Impellers |
J.E. Crouse; J.M. Sorokes |
|
90-GT-230 |
| IGTI |
1990 |
The Effect of Backswept Blading on the Flow in a Centrifugal Compressor Impeller |
T.Z. Farge; M.W. Johnson |
|
90-GT-231 |
| IGTI |
1990 |
Unsteady Velocity-and Turbulence Measurements with a Fast Response Pressure Probe |
G. Ruck; H. Stetter |
|
90-GT-232 |
| IGTI |
1990 |
Flow Investigation in a Small High Speed Impeller Passage Using Laser Anemometry |
N.A. Ahmed; R.L. Elder |
|
90-GT-233 |
| IGTI |
1990 |
A Prediction of 3-D Viscous Flow and Performance of the NASA Low-Speed Centrifugal Compressor |
J. Moore; J.G. Moore |
|
90-GT-234 |
| IGTI |
1990 |
Three Dimensional Design of a High-Speed Radial Inflow Turbine by a Novel Design Method |
M. Zangeneh |
|
90-GT-235 |
| IGTI |
1990 |
Boundary Layer and Navier-Stokes Analysis of a NASA Controlled-Diffusion Compressor Blade |
Y.K. Ho; G.J. Walker; P. Stow |
|
90-GT-236 |
| IGTI |
1990 |
Semi-Inverse Design of Compressor Cascades Including Supersonic Inflow |
A. Kirschner; H. Stoff |
|
90-GT-237 |
| IGTI |
1990 |
Developments Leading to an Axial Flow compressor for a 25MW Class High Efficiency Gas Turbine |
Y. Kashiwabara; Y. Katoh; H. Ishii; T. Hattori; T. Sasada; Y. Matsuura |
|
90-GT-238 |
| IGTI |
1990 |
On the Design of Magnetic Suspension Systems |
A. Sinha |
|
90-GT-239 |
| IGTI |
1990 |
Development of a Compact, Lightweight Magnetic Bearing |
C.R. Meeks; V. Spencer |
|
90-GT-240 |
| IGTI |
1990 |
CT7-6: The Most Recent T700 Growth Derivative Engine |
P.L. Kastrinelis; W.E. Lightfoot |
|
90-GT-241 |
| IGTI |
1990 |
T407/GLC38: A Modern Technology Powerplant |
M.J. Zoccoli; D.D. Klassen |
|
90-GT-242 |
| IGTI |
1990 |
Derivative T406 Based Turbofans for Advanced Trainers |
R.E. Riffel; T.F. McKain |
|
90-GT-243 |
| IGTI |
1990 |
Gas Turbine Engine Test Cell Modeling |
D. Salinas; E.E. Cooper |
|
90-GT-244 |
| IGTI |
1990 |
T406 Engine Development Program |
J.R. Arvin; M.E. Bowman |
|
90-GT-245 |
| IGTI |
1990 |
Effects f Chordwise Displacement and Nonrigid Section Deformation on Unsteady erodynamic Response of Subsonic and Supersonic Oscillating ascades |
M. Namba; K. Toshimitsu |
|
90-GT-246 |
| IGTI |
1990 |
Design of Shroud Interface-Angle to Minimize the Forced Vibrations of Blades |
J.H. Wang; H.L. Yau |
|
90-GT-247 |
| IGTI |
1990 |
Development of Silicon Nitride Engine Components for Advanced Gas Turbine Applications |
J.P. Pollinger; B.J. Busovne, Jr. |
|
90-GT-248 |
| IGTI |
1990 |
Relationship Between Feedstock Characteristics and Erosivity of FBC Bed Materials |
A.V. Levy; B.Q. Wang; G.Q. Geng |
|
90-GT-249 |
| IGTI |
1990 |
Options in Gas Turbine Power Augmentation Using Inlet Air Chilling |
I.S. Ondryas; D.A. Wilson; M. Kawamoto; G.L. Haub |
|
90-GT-250 |
| IGTI |
1990 |
Potential Applications of Structural Ceramic Composites in Gas Turbines |
W.P. Parks, Jr. R.R. Ramey; D.C. Rawlins; J.R. Price; M. Van Roode |
|
90-GT-251 |
| IGTI |
1990 |
Optimizing Aircraft Performance with Adaptive Integrated Flight Propulsion Control |
R.H. Smith; J.P. Chisholm; J.F. Stewart |
|
90-GT-252 |
| IGTI |
1990 |
Influence of Periodically Unsteady Wake Flow on the Flow Separation in Blade Channels |
G.H. Dibelius; E. Ahlers |
|
90-GT-253 |
| IGTI |
1990 |
Heat Transfer Characteristics of Turbulent Flow in a Square Channel with Angled Discrete Ribs |
S.C. Lau; R.D. McMillan; J.C. Han |
|
90-GT-254 |
| IGTI |
1990 |
An Experimental Investigation of Nozzle-Exit Boundary Layers of Highly Heated Free Jets |
J. Lepicovsky |
|
90-GT-255 |
| IGTI |
1990 |
Experimental Performance of a Heat Flux Microsensor |
J.M. Hager; S. Simmons; D. Smith; S. Onishi; L.W. Langley; T.E. Diller |
|
90-GT-256 |
| IGTI |
1990 |
Development of an Efficient Oil Film Damper for Improving the Control of Rotor Vibration |
S. Zhang; L. Yan |
|
90-GT-257 |
| IGTI |
1990 |
Laser Velocimeter Measurements in a Centrifugal Pump with a Synchronously Orbiting Impeller |
R.J. Beaudoin; S.M. Miner; R.D. Flack |
|
90-GT-258 |
| IGTI |
1990 |
Temporally and Spatially Resolved Flow in a Two-Stage Axial Compressor Part I - Experiment |
R.C. Stauter; R.P. Dring; F.O. Carta |
|
90-GT-259 |
| IGTI |
1990 |
A Zonal Approach for Navier-Stokes Computations of Compressible Cascade Flow Fields Using a TVD Finite Volume Method |
M. Furukawa; M. Yamasaki; M. Inoue |
|
90-GT-260 |
| IGTI |
1990 |
Prediction of Cascade Performance Using an Incompressible Navier-Stokes Technique |
G.V. Hobson; B. Lakshminarayana |
|
90-GT-261 |
| IGTI |
1990 |
Inviscid and Viscous Solutions for Airfoil/Cascade Flows Using a Locally Implicit Algorithm on Adaptive Meshes |
C.J. Hwang; J.L. Liu |
|
90-GT-262 |
| IGTI |
1990 |
Detailed Boundary Layer Measurements on a Transonic Turbine Cascade |
D.J. Mee; N.C. Baines; M.L.G. Oldfield |
|
90-GT-263 |
| IGTI |
1990 |
An Examination of the Contributions to Loss on a Transonic Turbine Blade in Cascade |
D.J. Mee; N.C. Baines; M.L.G. Oldfield; T.E. Dickens |
|
90-GT-264 |
| IGTI |
1990 |
An Experimental Study of the Effects of Liquid Properties on the Breakup of a Two-Dimensional Liquid Sheet |
B.E. Stapper; W.A. Sowa; G.S. Samuelsen |
|
90-GT-265 |
| IGTI |
1990 |
Evaluating Thermographic Phosphors in an Operating Turbine Engine |
B.W. Noel; H.M. Borella; W. Lewis; W.D. Turley; D.L. Beshears; G.J. Capps; M.R. Cates; J.D. Muhs; K.W. Tobin |
|
90-GT-266 |
| IGTI |
1990 |
Advanced Technology Programs for Small Turboshaft Engines: Past, Present, Future |
E.T. Johnson; H. Lindsay |
|
90-GT-267 |
| IGTI |
1990 |
Status of the Industrial Applications of the Active Magnetic Bearings Technology |
M. Dussaux |
|
90-GT-268 |
| IGTI |
1990 |
Transient Stress Response of a Turbine Blade under Non-Linear Damping Effects |
J.S. Rao; N.S. Vyas |
|
90-GT-269 |
| IGTI |
1990 |
Generalized High Speed Simulation of Gas Turbine Engines |
N. Sugiyama |
|
90-GT-270 |
| IGTI |
1990 |
Considerations for the Use of Variable Geometry in Gas Turbines |
J.E.A. Roy-Aikins |
|
90-GT-271 |
| IGTI |
1990 |
Enhanced On-Line Machinery Condition Monitoring through Automated Start-up/Shutdown Vibration Data Acquisition |
R.G. Harker; G.W. Handelin |
|
90-GT-272 |
| IGTI |
1990 |
Aero/Aeroderivative ngines: Internal Transducers Offer Potential For Enhanced Condition onitoring and Vibration Diagnostics |
M.J. Werner |
|
90-GT-273 |
| IGTI |
1990 |
Transient control of an Expander Driven Generator in an FCCU Application |
J. Sorokes; H.A. Kidd |
|
90-GT-274 |
| IGTI |
1990 |
Control System Retrofit Completes 10 Years of Gas-Turbine Reliability Enhancements |
A.A. Kohlmiller; W.B. Piercy |
|
90-GT-275 |
| IGTI |
1990 |
Correlated Fuel Property Effects on an F402-RR-406A (Pegasus) Engine Combustor |
H.C. Low; C.J. Scott; A. Veninger |
|
90-GT-276 |
| IGTI |
1990 |
Air Blast Atomization as a Function of Pressure Loss for Large Air Flow Rates |
U.S. Abdul Hussain; G.E. Andrews |
|
90-GT-277 |
| IGTI |
1990 |
Economic Considerations of Aircraft Turbines Manufacturing |
J.J. Alonso |
|
90-GT-278 |
| IGTI |
1990 |
Unburned Hydrocarbon, Volatile Organic Compound, and Aldehyde Emissions from General Electric Heavy-Duty Gas Turbines |
R.E. Pavri; R.A. Symonds |
|
90-GT-279 |
| IGTI |
1990 |
Effects f Gas Turbine Combustor Geometry Variation on Pollutant Emission Using Multi-Annular, Telescopic, Swirl Combustor |
V. Motevalli |
|
90-GT-280 |
| IGTI |
1990 |
Procedures for Shape Optimization of Gas Turbine Disks |
T.C. Cheu |
|
90-GT-281 |
| IGTI |
1990 |
Marine Support Concepts for Aero Derivative Turbine Engines |
C.E. Curry; P.W. Keppel |
|
90-GT-282 |
| IGTI |
1990 |
Design Considerations in the Development of a 38MW Gas Turbine Cogeneration Facility |
A.D. Hall; W.E. Hauhe, Jr. |
|
90-GT-283 |
| IGTI |
1990 |
Modification of a General Electric 7001B Turbine for Increased Reliability by Using 7001E Parts |
D.K. Prugger; W.J. McDermott |
|
90-GT-284 |
| IGTI |
1990 |
Full Coverage Impingement Heat Transfer at High Temperatures |
R.A.A. Abdul Husain; G.E. Andrews |
|
90-GT-285 |
| IGTI |
1990 |
Free Convection Phenomena in a Ribbed Wall |
N.S. Maravegias; D.P. Georgiou; D.D. Papiliou |
|
90-GT-286 |
| IGTI |
1990 |
FT8A, A New High Performance 25 MW Mechanical Drive Aero Derivative Gas Turbine |
A. Prario; H. Voss |
|
90-GT-287 |
| IGTI |
1990 |
Offshore Experience of the LM2500 Gas Turbine |
R.B. Spector; L.S. Cimino |
|
90-GT-288 |
| IGTI |
1990 |
RB211 Development and Experience with TransCanada Pipelines |
P.J. Handy; L.A. Cooke; D.J. Pethrick |
|
90-GT-289 |
| IGTI |
1990 |
Operating Experiences of the First LM1600 Installation |
A.L. Braun; S.R. Price |
|
90-GT-290 |
| IGTI |
1990 |
User Experience in Upgrading Early Models of Aero Derived Gas Turbine Pipeline Compressor Units to Current Standards |
L.J. Williams; D.J. Pethrick |
|
90-GT-291 |
| IGTI |
1990 |
Natural Gas Compressor Station Noise Abatement Systems |
G.P. Pappas |
|
90-GT-292 |
| IGTI |
1990 |
Material Issues for PFBC Expander Turbines |
J. Stringer |
|
90-GT-293 |
| IGTI |
1990 |
Reconstruction of Individual Aerodynamic Performance Stage Characteristics from Multistage Compressor |
L. Sapiro |
|
90-GT-294 |
| IGTI |
1990 |
The Rolls-Royce Turbomeca Adour - The Optimum Trainer Engine |
M. Ferguson |
|
90-GT-295 |
| IGTI |
1990 |
Testing at the U.S. Navy's Gas Turbine Systems Engineering Complex |
J.H. Preisel |
|
90-GT-296 |
| IGTI |
1990 |
Why an Engine Air Particle Separator (EAPS)? |
J.T. Potts, Jr. |
|
90-GT-297 |
| IGTI |
1990 |
Laser Two-Focus Anemometry Investigation of the Flowfield within a Supersonic Axial |
I. Trebinjac; A. Vouillarmet |
|
90-GT-298 |
| IGTI |
1990 |
Temporally and Spatially Resolved Flow in a Two-Stage Axial Compressor. Part II: Computational Assessment |
K.L. Gundy-Burlet; M.M. Rai; R.C. Stauter; R.P. Dring |
|
90-GT-299 |
| IGTI |
1990 |
A Technique for Measuring Convective Heat Transfer at Rough Surfaces |
Z. Wang; P.T. Ireland; T.V. Jones |
|
90-GT-300 |
| IGTI |
1990 |
Measurement and Calculation of End Wall Heat Transfer & Aerodynamics on a Nozzle Guide Vane in Annular Cascade |
N.W. Harvey; T.V. Jones |
|
90-GT-301 |
| IGTI |
1990 |
3D Flow Analysis in a Linear Cascade Using a Navier-Stokes Finite Element Code |
J.F. Combes; J.P. Chabard; B. Metivet |
|
90-GT-302 |
| IGTI |
1990 |
A Comparison of Zero and One Equation Turbulence Modelling for Turbomachinery Calculations |
W.N. Dawes |
|
90-GT-303 |
| IGTI |
1990 |
Dawes and Denton Codes Applied to a Transonic Compressor Rotor |
T.W. Von Backstroem |
|
90-GT-304 |
| IGTI |
1990 |
ATTAP/AGT 101-Year 2 Progress in Ceramic Technology Development |
J.R. Kidwell; L.J. Lindberg; R.E. Morey |
|
90-GT-305 |
| IGTI |
1990 |
Ceramic Small Gas Turbine Technology Demonstrator |
T. Bornemisza |
|
90-GT-306 |
| IGTI |
1990 |
Closed Brayton Cycle Engine Application to Emerging Unmanned Underwater Vehicle Missions |
A.D. Harper; J.S. Jansen |
|
90-GT-307 |
| IGTI |
1990 |
Second-Generation Low-Emission Combustors for ABB Gas Turbines: Test Under Full-Engine Conditions |
M. Aigner; A. Mayer; P. Schiessel; W. Strittmatter |
|
90-GT-308 |
| IGTI |
1990 |
'Recycling' of Gas Turbines from Obsolete Aircraft |
J.M. Morquillas; P. Pilidis |
|
90-GT-309 |
| IGTI |
1990 |
Nozzle Guide Vane Shock Wave Propagation and Bifurcation in a Transonic Turbine Rotor |
A.B. Johnson; M.L.G. Oldfield; M.J. Rigby; M.B. Giles |
|
90-GT-310 |
| IGTI |
1990 |
Numerical Prediction of Turbine Profile Loss |
L. Xu; J.D. Denton |
|
90-GT-311 |
| IGTI |
1990 |
Overtip Pressure Measurements in a Cold-Flow Turbine Rig |
R.C. Kingcombe; I.M. Smith; R.V. Steeden |
|
90-GT-312 |
| IGTI |
1990 |
Experimental Analysis Data on the Transonic Flow Past a Plane Turbine Cascade |
M. Stastny; P. Safarik |
|
90-GT-313 |
| IGTI |
1990 |
Off-Design Performance of a Linear Cascade of Turbine Blades |
B. Tremblay; S.A. Sjolander; S.H. Moustapha |
|
90-GT-314 |
| IGTI |
1990 |
The Assumed Mode Method in Structural Dynamics of Bladed-Disk-Shaft Systems |
N. Khader; S. Masoud |
|
90-GT-315 |
| IGTI |
1990 |
Fatigue Strength Enhancement Using Shape Memory Alloy Bushings |
E.R. Buchanan; R.B. Celin |
|
90-GT-316 |
| IGTI |
1990 |
An Evaluation of Waspaloy Expander Blade Tip Weld Repairs |
D.W. Cameron |
|
90-GT-317 |
| IGTI |
1990 |
Chemical Stripping of Honeycomb Airseals. Overview & Update |
Z. Galel; F. Brindisi; D. Nordstrom |
|
90-GT-318 |
| IGTI |
1990 |
Platinum Modified Aluminides-Present Status |
J.S. Smith; D.H. Boone |
|
90-GT-319 |
| IGTI |
1990 |
Evaluation of a 50,000 HP Marine Gas Turbine for Use in Future U.S. Navy Surface Ships |
C.B. Franks; J.R. White; J.C. Ness |
|
90-GT-320 |
| IGTI |
1990 |
Gas Turbine Powered Blue Riband Winner |
R. Allen; T.B. Lauriat |
|
90-GT-321 |
| IGTI |
1990 |
Accelerated Mission Tests and Reliability Improvement of F3-30 Engine |
H. Yanagihara; A. Tateno |
|
90-GT-322 |
| IGTI |
1990 |
RAMSCRAM - A Flexible Ramjet/Scramjet Engine Simulation Program |
L.A. Burkhardt; L.C. Franciscus |
|
90-GT-323 |
| IGTI |
1990 |
Non Invasive Measurement of Strain and Temperature by Neutron Diffraction |
T.M. Holden; J.H. Root; D.C. Tennant; D.E. Kroeze; D. Leggett |
|
90-GT-324 |
| IGTI |
1990 |
The Influences of Fintube Characteristics on the and Operation of Waste Heat Recovery Boilers (W.H.R.B.) Behind Turbines |
P.A. Desmet |
|
90-GT-325 |
| IGTI |
1990 |
Active Control Application to a Model Gas Turbine Combustor |
J. Brouwer; B.A. Ault; J.E. Bobrow; G.S. Samuelsen |
|
90-GT-326 |
| IGTI |
1990 |
High Turning Limit and Jet Like Profiles in Secondary Flow Field of Axial Turbines |
J.K. Kaldellis; P.D. Ktenidis |
|
90-GT-327 |
| IGTI |
1990 |
Steady-State Analysis of a Nonlinear Rotor-Housing System |
Y.B. Kim; S.T. Noah |
|
90-GT-328 |
| IGTI |
1990 |
An Investigation of Convective Heat Transfer in a Rotating Circular Coolant Channel |
J.O. Medwell; W.D. Morris; J.Y. Xia; C. Taylor |
|
90-GT-329 |
| IGTI |
1990 |
Influence of High Rotational Speeds on the Heat Transfer and Discharge Coefficients in Labyrinth Seals |
W. Waschka; S. Wittig; S. Kim |
|
90-GT-330 |
| IGTI |
1990 |
Heat Transfer in Rotating Serpentine Passages with Smooth Walls |
J.H. Wagner; B.V. Johnson; F.C. Kopper |
|
90-GT-331 |
| IGTI |
1990 |
An xperimental Investigation of Heat Transfer in an Orthogonally Rotating hannel Roughened with 45 Degree Criss-Cross Ribs on Two Opposite alls |
M.E. Taslim; L.A. Bondi; D.M. Kercher |
|
90-GT-332 |
| IGTI |
1990 |
Turbine Tip and Shroud Heat Transfer |
D.E. Metzger; M.G. Dunn; C. Hah |
|
90-GT-333 |
| IGTI |
1990 |
Film Cooling in the Presence of Mainstream Pressure Gradients |
A.J.H. Teekaram; C.J.P. Forth; T.V. Jones |
|
90-GT-334 |
| IGTI |
1990 |
A Comparative Evaluation of Advanced Combined Cycle Alternatives |
O. Bolland |
|
90-GT-335 |
| IGTI |
1990 |
An Algorithm and Criteria for Compressor Characteristics. Real Time Modeling and Approximation |
A.M. El-Gammal |
|
90-GT-336 |
| IGTI |
1990 |
A New Method of Predicting the Performance of Gas Turbine Engines |
Y. Wang |
|
90-GT-337 |
| IGTI |
1990 |
Airframe/Propulsion Integration at Transonic Speeds |
W.P. Henderson |
|
90-GT-338 |
| IGTI |
1990 |
Fault Detection and Diagnosis in Gas Turbines |
G. Merrington; O-K. Kwon; G. Goodwin; B. Carlsson |
|
90-GT-339 |
| IGTI |
1990 |
A Controlled System for a High-Quality Generating Set Equipped with a Two-Shaft Gas Turbine |
H. Kumakura; T. Matsumura; E. Tsuruta; A. Watanabe |
|
90-GT-340 |
| IGTI |
1990 |
Fast Response Wall Pressure Measurement as a Means of Gas Turbine Blade Fault Identification |
K. Mathioudakis; A. Papathanasiou; E. Loukis; K. Papiliou |
|
90-GT-341 |
| IGTI |
1990 |
Simulation of Aircraft Gas Turbine Engines |
I.H. Ismail; F.S. Bhinder |
|
90-GT-342 |
| IGTI |
1990 |
Computational Fluid Dynamic Applications for Jet Propulsion System Integration |
R.H. Tindell |
|
90-GT-343 |
| IGTI |
1990 |
Dynamic Simulation of Compressor Station Operation Including Centrifugal Compressor and Gas Turbine |
K.K. Botros; P.J. Campbell; D.B. Mah |
|
90-GT-344 |
| IGTI |
1990 |
Combined Cycle Plants with Frame 9F Gas Turbines |
P. Lugand; C. Parietti |
|
90-GT-345 |
| IGTI |
1990 |
The Use of Semi-Conductor Sensors for Blade Surface Pressure Measurement in a Model Turbine Stage |
R.W. Ainsworth; A.J. Dietz; T.A. Nunn |
|
90-GT-346 |
| IGTI |
1990 |
Corrosion and Degradation of Ceramic Particulate Filters in Direct Coal-Fired Turbine Applications |
J.W. Sawyer; R.J. Vass; N.R. Brown; J.J. Brown, Jr. |
|
90-GT-347 |
| IGTI |
1990 |
A Proposed Method for Assessing the Susceptibility of Axial Compressors to Fouling |
F. Seddigh; H.I.H. Saravanamuttoo |
|
90-GT-348 |
| IGTI |
1990 |
Control Systems for Turbo Expanders in Pressure Reduction Service |
T.H. Barmby; A. Cleveland |
|
90-GT-349 |
| IGTI |
1990 |
MS3002 Advanced Tech Upgrade Application and Operating Experience |
C.M. Grondahl; M.E. Guiler |
|
90-GT-350 |
| IGTI |
1990 |
A Computer Method for Thermal Power Cycle Calculation |
E. Perz |
|
90-GT-351 |
| IGTI |
1990 |
Mixing in Axial-Flow Compressors: Conclusions Drawn from 3-D Navier-Stokes Analyses and Experiements |
J.H. Leylek; D.C. Wisler |
|
90-GT-352 |
| IGTI |
1990 |
The Aerodynamic and Mechanical Performance of a High Pressure Turbine Stage in a Transient Wind Tunnel |
A.G. Sheard; R.W. Ainsworth |
|
90-GT-353 |
| IGTI |
1990 |
High Speed Compressor Surge with Application to Active Control |
A.M. Cargill; C. Freeman |
|
90-GT-354 |
| IGTI |
1990 |
Endwall Losses and Flow Unsteadiness in a Turbine Blade Cascade |
L. Adjlout; S.L. Dixon |
|
90-GT-355 |
| IGTI |
1990 |
An xperimental Study of Local Wall Shear Stress, Surface Static Pressure nd Flow Visualization Upstream, Alongside and Downstream of a Blade ndwall Corner |
A.K. Abdulla; R.K. Bhargava; R. Raj |
|
90-GT-356 |
| IGTI |
1990 |
Engine Performance Monitoring and Troubleshooting Techniques for the CF-18 Aircraft |
R.W. Cue; D.E. Muir |
|
90-GT-357 |
| IGTI |
1990 |
Aero-Thermal Performance of a Two Dimensional Highly Loaded Transonic Turbine Nozzle Guide Vane |
T. Arts; M. Lambert De Rouvroit |
|
90-GT-358 |
| IGTI |
1990 |
Three-Dimensional Flowfields Inside a Transonic Compressor with Swept Blades |
C. Hah; A.J. Wennerstrom |
|
90-GT-359 |
| IGTI |
1990 |
Development of ODS Superalloy Technology in Japan for Turbine Blade Applications |
K. Mino |
|
90-GT-360 |
| IGTI |
1990 |
An Approach to Describing the Simultaneous Erosion and High Temperature Oxidation of Alloys |
I.G. Wright; V.K. Sethi; V. Nagarajan |
|
90-GT-361 |
| IGTI |
1990 |
Shop Test of the 501F - A 150 MW Combustion Turbine |
D.T. Entenmann; W.E. North; I. Fukue; A. Muyama |
|
90-GT-362 |
| IGTI |
1990 |
Fully Loaded Factory Test of the CW251B12 Gas Turbine Engine |
I.S. Diakunchak |
|
90-GT-363 |
| IGTI |
1990 |
Integrated Propulsion System Requirements for Control of STOVL Aircraft |
G.W. Gallops; C.F. Weiss; R.A. Carlton |
|
90-GT-364 |
| IGTI |
1990 |
Assessing Diagnostic Techniques for Problem Identification in Advanced Industrial Gas Turbines |
A. Lifson; A.J. Smalley; G.H. Quentin; J. Zanyk |
|
90-GT-365 |
| IGTI |
1990 |
Coal-Derived Gas Utilization in Combined Gas-Steam Cycle Power Plants |
R. Tuccillo; G. Fontana; E. Jannelli |
|
90-GT-366 |
| IGTI |
1990 |
Combined Cycles Permit the Most Environmentally Benign Conversion of Fossil Fuels to Electricity |
G. Haupt; J.S. Joyce; K. Kuenstle |
|
90-GT-367 |
| IGTI |
1990 |
Gas urbine Performance Improvement. Direct Mixing Evaporative Cooling ystem. American Atlas Cogeneration Facility, Rifle, Colorado |
J.P. Nolan; V.J. Twombly |
|
90-GT-368 |
| IGTI |
1990 |
Modified Exhaust Heated Gas Turbine Cycle with Increased Thermal Efficiency and Its Prospect for Industrial Application |
J.A. Golinski |
|
90-GT-369 |
| IGTI |
1990 |
Off-Design Performances of Fully-Fired Combined Cycle Cogeneration |
G. Fang; R. Cai; R. Lin |
|
90-GT-370 |
| IGTI |
1990 |
Construction of a 700MW Combined Cycle Plant for Yanai Power Station No. 1 |
S. Shirakura; K. Hoshino; N. Ando |
|
90-GT-371 |
| IGTI |
1990 |
Water Treatment and Moisture Separation in Steam-Injected Gas Turbines |
D.A. Kolp; S.R. Gagnon; M.J. Rosenbluth |
|
90-GT-372 |
| IGTI |
1990 |
Comparison of Inviscid Computations with Theory and Experiment in Vibrating Transonic compressor Cascades |
G.A. Gerolymos; E. Blin; H. Quiniou |
|
90-GT-373 |
| IGTI |
1990 |
The Role for Expert Systems in Commercial Gas Turbine Engine Monitoring |
D.L. Doel |
|
90-GT-374 |
| IGTI |
1990 |
Experience with External Fires in Gas Turbine Installations and Implications for Fire Protection |
R.E. Dundas |
|
90-GT-375 |
| IGTI |
1990 |
Gas Turbine Component Fault Identification by Means of Adaptive Performance Modeling |
A. Stamatis; K. Mathioudakis; M. Smith; K. Papailiou |
|
90-GT-376 |
| IGTI |
1990 |
Factors that Affect Rolling Contact Fatigue Life of Ceramics and Rolling Contact Fatigue Life of Ceramic Balls and Rollers |
Y. Nishihara; H. Nakashima; N. Tsushima; S. Ito |
|
90-GT-377 |
| IGTI |
1990 |
MS9001F - A New Advanced Technology 50 Hz Gas Turbine |
D.E. Brandt; M. Colas |
|
90-GT-378 |
| IGTI |
1990 |
Future of Combined-Cycle Plants in Belgium |
P. Mathieu |
|
90-GT-379 |
| IGTI |
1990 |
Experimental Evaluation of a Low NOx LBG Combustor Using Bypass Air |
T. Nakata; M. Sato; T. Ninomiya; T. Abe; S. Mandai; N. Sato |
|
90-GT-380 |
| IGTI |
1990 |
Coal Gaseous Fueled, Low Fuel NOx Gas Turbine Combustor |
M. Sato; T. Ninomiya; T. Nakata; T. Yoshine; M. Yamada; S. Hisa |
|
90-GT-381 |
| IGTI |
1990 |
Influence of Cascade Parameters on the Deposition of Small Particles |
D.P. Kladas; D.P. Georgiou |
|
90-GT-382 |
| IGTI |
1990 |
Determination of Fracture Origin in Ceramic Radial Rotor by Taking Photographs at Failure from Two or Three Directions |
N. Kamiya; M. Asai; A. Bessho; S. Wada |
|
90-GT-383 |
| IGTI |
1990 |
Development of Ceramic Engine Parts for Heat Insulated Engine |
H. Kawamura |
|
90-GT-384 |
| IGTI |
1990 |
TFE 1042-A New Low Bypass Ratio Engine |
A.R. Findelstein |
|
90-GT-385 |
| IGTI |
1990 |
Problems and Use of the Scaling Factors in the Numerical Simulation of Jet Engines |
G. Torella |
|
90-GT-386 |
| IGTI |
1990 |
Analysis of Viscous Flowfield Over Tactical Aircraft Forebody and Inlets |
W. Tseng; D. Findlay |
|
90-GT-387 |
| IGTI |
1990 |
Optical Fan Blade Profile Measurement in Rotating Turbomachinery |
T. Davinson; J. Mutton; R. Parker; A. Parnell; J. Roberts |
|
90-GT-388 |
| IGTI |
1990 |
Non-Intrusive Sensing Techniques for Advanced Turbine Engine Structures |
W.A. Stange |
|
90-GT-389 |
| IGTI |
1990 |
Development of Advanced Diagnostics for Turbine Disks |
J.R. Dunphy; W.H. Atkinson |
|
90-GT-390 |
| IGTI |
1990 |
Adaptation of a Small Commercial Fan Jet Trainer for Military Applications |
D.I. Boyd |
|
90-GT-391 |
| IGTI |
1990 |
NOx Exhaust Emissions for Gas-Fired Turbine Engines |
P.C. Malte; S. Bernstein; F. Bahlmann; J. Doelman |
|
90-GT-392 |
| IGTI |
1990 |
The Effect of Ambient Pressure on the Spray Characteristics of a Twin-Fluid Atomizer |
S.A. Drennan; W.A. Sowa; G.S. Samuelsen |
|
90-GT-393 |
| IGTI |
1990 |
Flow Distribution in a Model Recuperator of an Intercolled-Recuperative Marine Gas Turbine |
R.A. Uhlig; R.L. Kiang; J.L. Buyer |
|
90-GT-394 |
| IGTI |
1992 |
Shock Formation In Overexpanded Tip Leakage Flow |
J. oore, Virginia Polytechnic Inst. & State University, Blacksburg, A, USA; K.M. Elward, General Electric Company, Schenectady, NY, SA |
|
92-GT-001 |
| IGTI |
1992 |
Status Of The Automotive Ceramic Gas Turbine Development Program |
T. Itoh, Japan Automobile Research Inst., Inc., Ibaraki, JAPAN; H. Kimura, Petroleum Energy Center, Tokyo, JAPAN |
|
92-GT-002 |
| IGTI |
1992 |
Current Status of 300 KW Industrial Ceramic Gas Turbine R&D In Japan |
K. onjo, R. Hashimoto, Agency of Industrial Science and Technology, MITI, okyo, JAPAN; H. Ogiyama, New Energy and Industrial Technology evelopment Organization, Tokyo, JAPAN |
|
92-GT-003 |
| IGTI |
1992 |
Recent Advances In Simulating Unsteady Flow Phenomena Brought About By Passage Of Shock Waves In A Linear Turbine Cascade |
J.C. ollie, H.L. Moses, J.A. Schetz, Virginia Polytechnic Inst. & State niversity, Blacksburg, VA, USA; B.A. Gregory, General Electric ircraft Engines, Cincinnati, OH, USA |
|
92-GT-004 |
| IGTI |
1992 |
A Statistical Approach To The Experimental Evaluation Of Transonic Turbine Airfoils In A Linear Cascade |
M.L. helton, B.A. Gregory, General Electric Aircraft Engines, Cincinnati, H, USA; R.L. Doughty, T. Kiss, H.L. Moses, Virginia Polytechnic Inst. amp; State University, Blacksburg, VA, USA |
|
92-GT-005 |
| IGTI |
1992 |
Coupled Multi-Disciplinary Simulation Of Composite Engine Structures In Propulsion Environment |
C.C. Chamis, NASA Lewis Research Center, Cleveland, OH, USA; S.N. Singhal, Sverdrup Technology, Inc., Cleveland, OH, USA |
|
92-GT-006 |
| IGTI |
1992 |
A Study On Stability And Response Analysis Of A Nonlinear Rotor System With Mass Unbalance And Side Load |
T.N. Shiau, National Cheng Kung University, Tainan, Taiwan, R.O.C.; |
|
92-GT-007 |
| IGTI |
1992 |
Investigation Of The Vibration Of A Blade With Friction Damper By HBM |
J.H. Wang, W.K. Chen, National Tsing Hua University, Hsinchu, Taiwan, R.O.C.; |
|
92-GT-008 |
| IGTI |
1992 |
LQR-Based east-Squares Output Feedback Control Of Rotor Vibrations Using The omplex Mode And Balanced Realization Methods |
G.W. an, H.D. Nelson, P.E. Crouch, Arizona State University, Tempe, AZ, SA; M.P. Mignolet, Texas Christian University, Fort Worth, TX, SA |
|
92-GT-009 |
| IGTI |
1992 |
A Numerical Investigation Into The Nozzle Flow Of High By-Pass Turbofans |
H. Zimmerman, K. Katheder, A. Jula, MTU Motoren- und Turbinen-Union München GmbH, Munich, GERMANY; |
|
92-GT-010 |
| IGTI |
1992 |
Conceptual Design Of A Centrifugal Compressor Including Consideration Of The Effect Of Inlet Prewhirl |
A. Whitfield, University of Bath, Bath, UK; |
|
92-GT-011 |
| IGTI |
1992 |
Numerical Analyses Of A Rocket Engine Turbine And Comparison With Air Test Data |
K. ran, D.C. Chan, Rockwell International Corp., Canoga Park, CA, USA; .T. Hudson, S.W. Gaddis, NASA-Marshall Space Flight Center, untsville, AL, USA |
|
92-GT-012 |
| IGTI |
1992 |
Analysis Of High Speed Multistage Compressor Throughflow Using Spanwise Mixing |
J. Dunham, Defence Research Agency, Hampshire, UK; |
|
92-GT-013 |
| IGTI |
1992 |
Lifting Surface Theory for Steady Aerodynamic Analysis of Ducted Counter Rotation Propfan |
H.K. Kodama, Ishikawajima-Harima Heavy Ind., Tokyo, JAPAN; M. Namba, Kyushu University, Fukuoka, JAPAN |
|
92-GT-014 |
| IGTI |
1992 |
Design Features Of The GTD 8000 And GTD 15000 Marine Gas Turbine Engines |
V.I. Romanov, NPO Mashproject, Nicolayev, USSR; |
|
92-GT-015 |
| IGTI |
1992 |
Evaluation Of Compressor Inlet Flow Conditioners |
A.H. Haidari, VORTAB, Inc., Whitehall, PA, USA; T. Hordendorf, J.C. Bartos, CONMEC, Inc., Bethlehem, PA, USA |
|
92-GT-016 |
| IGTI |
1992 |
The Influence Of Adjustable Inlet Guide Vanes On the Performance Of Multi-Stage Industrial Centrifugal Compressors |
K. Ludtke, Babcock-Borsig AG, Berlin, GERMANY; |
|
92-GT-017 |
| IGTI |
1992 |
Stage Efficiency Effects Of Vaneless Diffuser Wall Contours |
J.B. Wulf, Union Carbide Industrial Gases, Tonawanda, NY, USA; |
|
92-GT-018 |
| IGTI |
1992 |
Experimental Results On A Rotatable Low Solidity Vaned Diffuser |
J.M. Sorokes, J.P. Welch, Dresser-Rand Turbo Products Division, Olean, NY, USA; |
|
92-GT-019 |
| IGTI |
1992 |
Pressure Distributions In A Single And Two Versions Of A Double Volute Of A Centrifugal Pump |
W. e Ojeda, R.D. Flack, University of Virginia, Charlottesville, VA, USA; .M. Miner, U.S. Naval Academy, Annapolis, MD, USA |
|
92-GT-020 |
| IGTI |
1992 |
Solar Centaur Taurus T-6502 - The First Installation |
A.L. Braun, NOVA Corporation of Alberta, Calgary, AB, CANADA; |
|
92-GT-021 |
| IGTI |
1992 |
Simplified Mathematical Representations Of Single Shaft Gas Turbines In Mechanical Drive Service |
W.I. Rowen, General Electric Company, Schenectady, NY, USA; |
|
92-GT-022 |
| IGTI |
1992 |
Turbine Rebuild Effects On Gas Turbine Performance |
J.D. MacLeod, National Research Council, Ottawa, ON, CANADA; B. Orbanski, Standard Aero Ltd., Winnipeg, MB, CANADA |
|
92-GT-023 |
| IGTI |
1992 |
Transient Phenomena In Compressor Stations During Surge |
K. Botros, Nova Husky Research Corporation, Calgary, AB, CANADA; |
|
92-GT-024 |
| IGTI |
1992 |
Axial Inlet Conversion To A Centrifugal Compressor With Magnetic Bearings |
T. Novecosky, NOVA Corporation of Alberts, Edmonton, AB, CANADA; |
|
92-GT-025 |
| IGTI |
1992 |
Foothills Decompression/Recompression Facilities - Unique Power Recovery Application In Gas Pipelines |
S. itt, Foothills Pipelines Ltd., Calgary, AB, CANADA; B.D. Rose, Amoco anada Petroleum Company Ltd., Calgary, AB, CANADA |
|
92-GT-026 |
| IGTI |
1992 |
Development Of A Regenerator For An Automotive Gas Turbine Engine |
J. Sayama, T. Morishita, Toyota Motor Corporation, Shizuoka, JAPAN; |
|
92-GT-027 |
| IGTI |
1992 |
Compressor Fault Identification From Overall Performance Data Based On Adaptive Stage Stacking |
K. Mathioudakis, A. Stamatis, National Technical University of Athens, Athens, GREECE; |
|
92-GT-028 |
| IGTI |
1992 |
Optimizing Automated Gas Turbine Fault Detection Using Statistical Pattern Recognition |
E. Loukis, K. Mathioudakis, K. Papailiou, National Technical University of Athens, Athens, GREECE; |
|
92-GT-029 |
| IGTI |
1992 |
Experimental And Theoretical Analysis Of The Flow In A Centrifugal Compressor Volute |
E. yder, R. Van den Braembussche, von Karman Institute For Fluid ynamics, Rhode Saint Genese, BELGIUM; J.J. Brasz, Carrier Corporation, yracuse, NY, USA |
|
92-GT-030 |
| IGTI |
1992 |
Aerodynamic Performance Of A Transonic Low Aspect Ratio Turbine Nozzle |
S.H. oustapha, Pratt & Whitney Canada, Inc., Montreal, PQ, CANADA; W.E. arscallen, National Research Council, Ottawa, ON, CANADA; J.D. cGeachy, Queen's University, Kingston, ON, CANADA |
|
92-GT-031 |
| IGTI |
1992 |
Investigation Of Compressor Rotor Wake Structure At Peak Pressure Rise Coefficient And Effects Of Loading |
J. Prato, B. Lakshminarayana, The Pennsylvania State University, University Park, PA, USA; |
|
92-GT-032 |
| IGTI |
1992 |
Pressure Fluctuation On Casing Wall Of Isolated Axial Compressor Rotors At Low Flow Rate |
M. Inoue, M. Kuroumaru, Y. Ando, Kyushu University, Fukuoka, JAPAN; |
|
92-GT-033 |
| IGTI |
1992 |
Blade Loading And Shock Wave In A Transonic Circular Cascade Diffuser |
H. ayami, N. Kawaguchi, Kyushu University, Kasuga, JAPAN; M. Sawae, ippon Mining Co., LTD., Chita, JAPAN; T. Nakamura, Toshiba orporation, Yokohama, JAPAN |
|
92-GT-034 |
| IGTI |
1992 |
Active Control Of Complex Physical Systems: An Overview |
R.J. Hansen, Office of Naval Research, Arlington, VA, USA; E.W. Hendricks, Naval Ocean Systems Center, San Diego, CA, USA |
|
92-GT-035 |
| IGTI |
1992 |
Recess Vane Passive Stall Control |
M. Ziabasharhagh, A.B. McKenzie, R.L. Elder, Cranfield Inst. of Technology, Bedford, UK; |
|
92-GT-036 |
| IGTI |
1992 |
Evaluation Of Leasing Versus Purchasing Water Treatment Equipment For Cogeneration Projects |
S.R. Gagnon, Process Equipment Unlimited, Londonderry, NH, USA; H.A. Guidotti, Energy Services, Inc., Farmington, CT, USA |
|
92-GT-037 |
| IGTI |
1992 |
Influence Of A Thermal Barrier Coating On The Performance Of A Turboprop Engine |
J.D. acLeod, National Research Council of Canada, Ottawa, ON, CANADA; .C.G. Laflamme, Department of National Defence, Ottawa, ON, ANADA |
|
92-GT-038 |
| IGTI |
1992 |
Optimized High Efficiency Filter For High-Efficiency Industrial Combustion Turbines |
Henry H.S. Yu, C.H. Goulding, Farr Company, El Sequndo, CA, USA; |
|
92-GT-039 |
| IGTI |
1992 |
100 MW Combined Cycle Achieves 7000 BTU/KWH Heat Rate At JFK International Airport |
D.A. olp, S.Y. Kim, Energy Services, Inc., Farmington, CT, USA; R.Roberts, . Roberts Consulting, Inc., The Woodlands, TX, USA |
|
92-GT-040 |
| IGTI |
1992 |
A Combustor Diffuser Of Annular Configuration Suitable For Industrial Gas Turbines |
R.C. dkins, Cranfield Institute of Technology, Cranfield, UK; A.C. Benim, .C. Escher, J. Hellat, W.M. Koenig, ABB Turbo Systems Ltd., Baden, WITZERLAND |
|
92-GT-041 |
| IGTI |
1992 |
Safety spects And Environmental Considerations For A 10 MW Cogeneration Heavy uty Gas Turbine Burning Coke Oven Gas With 60% Hydrogen Content |
J.J. Wolf, M.A. Perkavec, European Gas Turbines GMBH, Essen, GERMANY; |
|
92-GT-042 |
| IGTI |
1992 |
A Model And State-Space Controllers For An Intercooled, Regenerated (ICR) Gas Turbine Engine |
J.W. atts, T.E. Dwan, U.S. Naval Academy, Annapolis, MD, USA; R.W. Garman, avid Taylor Research Center, Annapolis, MD, USA |
|
92-GT-043 |
| IGTI |
1992 |
Hot Corrosion Resistance Of Thermal Barrier Coatings |
B.A. agaraj, A.F. Maricocchi, D.J. Wortman, General Electric Aircraft ngines, Cincinnati, OH, USA; J.S. Patton, R.L. Clarke, David Taylor esearch Center, Annapolis, MD, USA |
|
92-GT-044 |
| IGTI |
1992 |
Civil Aircraft Challenges In Engine/Airframe Integration |
G.L. Hamilton, H.R. Welge, McDonnell Douglas Corporation, Long Beach, CA, USA; |
|
92-GT-045 |
| IGTI |
1992 |
Development Of A Gas Turbine Generator - On Board Electric Power Source For MAGLEV Trains |
T. ashizu, S. Matsuda, Toshiba Corporation, Yokohama, JAPAN; T. orishita, Toyota Motor Corporation, Susono, JAPAN; N. Terauchi, ailway Technical Research Institute, Tokyo, JAPAN |
|
92-GT-046 |
| IGTI |
1992 |
A System Dynamics Approach To Modeling Gas Turbine Combustor Wear |
B. agepalli, S. Dinc, I. Imam, GE Corp. Research & Development, chenectady, NY, USA; J. Barnes, C. Slocum, GE Gas Turbine & ombined Cycle Engineering, Schenectady, NY, USA |
|
92-GT-047 |
| IGTI |
1992 |
Viscous Flows In Centrifugal Compressor Diffusers At Transonic Mach Numbers |
I. Teipel, A. Wiedermann, W. Evers, University of Hannover, Hannover, GERMANY; |
|
92-GT-048 |
| IGTI |
1992 |
An Investigation On The Artificial Viscosity In The Transonic Stream Function Formulation |
J.Z. Xu, J.Y. Du, H. Shen, M.C. Ge, Chinese Academy of Sciences, Beijing, CHINA; |
|
92-GT-049 |
| IGTI |
1992 |
Electromechanical Measurement Of Turbomachinery Blade Tip-To-Casing Running Clearance |
A.G. Sheard, Rotodata Ltd., Derby, ENGLAND; S.R. Turner, Rolls-Royce plc, Bristol, ENGLAND |
|
92-GT-050 |
| IGTI |
1992 |
Self-Excited Vibration Of Plugs In Regulating Valves |
V. Vlcek, I. Dobias, Czechoslovak Academy of Science, Prague, CZECHOSLOVAKIA; |
|
92-GT-051 |
| IGTI |
1992 |
Integration Of Condition Monitoring Technologies For the Health Monitoring Of Gas Turbines |
C.B. eher-Homji, Boyce Engineering International Inc., Houston, TX, USA; .P. Cullen, Phillips Petroleum Company, Tananger, NORWAY |
|
92-GT-052 |
| IGTI |
1992 |
Development Of A Knowledge Based Advisory System Based On Vibration Of A Peaking Gas Turbine |
R.M. aldwin, A.J. Smalley, R.E. Harris, Southwest Research Institute, San ntonio, TX, USA; G.H. Quentin, Electric Power Research Institute, Palo lto, CA, USA |
|
92-GT-053 |
| IGTI |
1992 |
One-Dimensional Methods For Accurate Prediction Of Off-Design Performance Behavior Of Axial Turbines |
T. Schobeiri, Texas A&M University, College Station, TX, USA; |
|
92-GT-054 |
| IGTI |
1992 |
An Investigation Of Post Stall Transients And Recoverability Of Axial Compression Systems: Part I - A Simplified Method |
J. Hu, G.C. Tang, H.M. Zhang, Nanjing Aeronautical Institute, Nanjing, CHINA; |
|
92-GT-055 |
| IGTI |
1992 |
An Investigation Of Post Stall Transients And Recoverability Of Axial Compression Systems: Part II - Numerical Simulations |
J. Hu, G.C. Tang, H.M. Zhang, Nanjing Aeronautical Institute, Nanjing, CHINA; |
|
92-GT-056 |
| IGTI |
1992 |
Stability Of Fully Developed Rotating Stall |
F.E. McCaughan, H.X. Xue, Case Western Reserve University, Cleveland, OH, USA; |
|
92-GT-057 |
| IGTI |
1992 |
A Wide-Range Axial-Flow Compressor Stage Performance Model |
G.S. loch, Wright Patterson Air Force Base, WPAFB, OH, USA; W.F. O'Brien, irginia Polytechnic Institute and State University, Blacksburg, VA, SA |
|
92-GT-058 |
| IGTI |
1992 |
Modified Surge In An Axial Flow Compressor |
L. Pust, National Research Inst. for Machine Design, Prague, Bechovice, CZECH.; |
|
92-GT-059 |
| IGTI |
1992 |
Turbulence Evaluation Within The Secondary Flow Region Of A Turbine Cascade |
D.G. Gregory-Smith, Th. Biesinger, University of Durham, Durham, UK; |
|
92-GT-060 |
| IGTI |
1992 |
Three Dimensional Transonic Flow Measurements In An Axial Turbine With Conical Walls |
F. Kost, DLR, Gottingen, GERMANY; |
|
92-GT-061 |
| IGTI |
1992 |
Secondary Flows In A Transonic Cascade: Validation Of A 3-D Navier-Stokes Code |
F. Bassi, Politecnico di Milano, Milano, ITALY; M. Savini, CNPM-CNR, Peschiera Borromeo, ITALY |
|
92-GT-062 |
| IGTI |
1992 |
Assessment Of A 3-D Euler Code For Subsonic Turbine Vane Flows And Study Of The Non-Radial Blade Stacking |
J. Vialonga, B. Petot, SNECMA, Moissy-Cramayel, FRANCE; T. Chiappa, Ecole Des Mines De Nancy, Maisons-Alfort, FRANCE |
|
92-GT-063 |
| IGTI |
1992 |
An Investigation Of Spanwise Mixing In Multistage Axial Flow Compressors |
S.-M. Li, Tsing Hua University, Beijing, CHINA; M.-Z. Chen, Beijing University of Aero. & Astro., Beijing, CHINA |
|
92-GT-064 |
| IGTI |
1992 |
Three-Dimensional Inviscid Flow Computations In A Spatial Turbopump Inducer Using A Distributed Loss Model |
E.M. l Ghazzani, G. Bois, Metraflu, Ecully, FRANCE; P. Geai, Societe uropeenne de Propulsion, Vernon, FRANCE; F. Leboeuf, Ecole Centrale de yon, Ecully, FRANCE |
|
92-GT-065 |
| IGTI |
1992 |
The Vortex Behaviour Of The Rotating-Stall Cell Of A Centrifugal Compressor With Vaned Diffuser |
Y.N. hen, Sulzer Brothers Ltd., Winterthur, SWITZERLAND; U. Seidel, U. aupt, M. Rautenberg, University of Hannover, Hannover, GERMANY |
|
92-GT-066 |
| IGTI |
1992 |
Flow Pattern And Heat Transfer In A Closed Rotating Annulus |
D. Bohn, G.H. Dibelius, E. Deuker, R. Emunds, RWTH, Aachen, GERMANY; |
|
92-GT-067 |
| IGTI |
1992 |
Simulation Of The Secondary Air System Of Aero Engines |
K.J. Kutz, T.M. Speer, MTU München GmbH, München, GERMANY; |
|
92-GT-068 |
| IGTI |
1992 |
Shroud Heat Transfer Measurements From A Rotating Cavity With An Axial Throughflow Of Air |
C.A. Long, P.G. Tucker, University of Sussex, Sussex, UK; |
|
92-GT-069 |
| IGTI |
1992 |
Calculation Of Turbulent Flow For An Enclosed Rotating Cone |
N.E. ay, ARA Limited, Bedford, UK; J.W. Chew, Rolls-Royce Ltd, Derby, UK; .W. James, Polytechnic South West, Plymouth, UK |
|
92-GT-070 |
| IGTI |
1992 |
Compressible Flow Pressure Losses In Wye-Junctions |
N.I. Abou-Haidar, University of Leicester, Leicester, UK; S.L. Dixon, The University of Liverpool, Liverpool, UK |
|
92-GT-071 |
| IGTI |
1992 |
Aeroloads And Secondary Flows In A Transonic Mixed Flow Turbine Stage |
K.R. Kirtley, T.A. Beach, Sverdrup Technology, Inc., Cleveland, OH, USA; C. Rogo, Teledyne CAE, Toledo, OH, USA |
|
92-GT-072 |
| IGTI |
1992 |
Design And Rotor Performance Of A 5:1 Mixed-Flow Supersonic Compressor |
R. Monig, Rheinmetall GmbH, Dusseldorf, GERMANY; W. Elmendorf, H.E. Gallus, RWTH Aachen, Aachen, GERMANY |
|
92-GT-073 |
| IGTI |
1992 |
Aerodynamic Design Of Turbomachinery Blading In Three-Dimensional Flow: An Application To Radial Inflow Turbines |
Y.L. Yang, C.S. Tan, W.R. Hawthorne, Massachusetts Institute of Technology, Cambridge, MA, USA; |
|
92-GT-074 |
| IGTI |
1992 |
Hot Streaks And Phantom Cooling In A Turbine Rotor Passage: Part 1 - Separate Effects |
R.J. Roback, R.P. Dring, United Technologies Research Center, E. Hartford, CT, USA; |
|
92-GT-075 |
| IGTI |
1992 |
Hot Streaks And Phantom Cooling In A Turbine Rotor Passage: Part 2 - Combined Effects And Analytical Modelling |
R.J. Roback, R.P. Dring, United Technologies Research Center, E. Hartford, CT, USA; |
|
92-GT-076 |
| IGTI |
1992 |
Extending The Fatigue Life Of Aircraft Engine Components By Hole Cold Expansion Technology |
A.C. Rufin, Fatigue Technology, Inc., Seattle, WA, USA; |
|
92-GT-077 |
| IGTI |
1992 |
Fatigue Life Estimation Procedure For A Turbine Blade Under Transient Loads |
N.S. Vyas, Indian Institute of Technology, Kanpur, INDIA; J.S. Rao, Indian Institute of Technology, New Delhi, INDIA |
|
92-GT-078 |
| IGTI |
1992 |
Circulator Design/Technology Evolution For Gas-Cooled Nuclear Reactors |
C.F. cDonald, General Atomics, San Diego, CA, USA; D.D. Kapich, Consultant, an Diego, CA, USA; I.R. Marshall, J. Donaldson, James Howden Company, td., Renfrew, Scotland, UK |
|
92-GT-079 |
| IGTI |
1992 |
An Infrared Pyrometry System For Monitoring Gas Turbine Blades: Development Of A Computer Model And Experimental Results |
M. De Lucia, C. Lanfranchi, Universita delgi Studi di Firenze, Firenze, ITALY; |
|
92-GT-080 |
| IGTI |
1992 |
Effects Of Back-Pressure In A Lean Blowout Research Combustor |
G.J. turgess, Pratt & Whitney, E. Hartford, CT, USA; S.P. Heneghan, .D. Vangsness, D.R. Ballal, University of Dayton, Dayton, OH, USA; .L. Lesmerises, D. Shouse, Wright Laboratories, WPAFB, OH, USA |
|
92-GT-081 |
| IGTI |
1992 |
Fault Signatures Obtained From Fault Implant Tests On An F404 Engine |
R.W. Eustace, B.A. Woodyatt, G.L. Merrington, T.A. Runacres, DSTO Aeronautical Research Laboratory, Melbourne, AUSTRALIA; |
|
92-GT-082 |
| IGTI |
1992 |
The Effect Of Compressor Rotor Tip Crops On Turboshaft Engine Performance |
P.C. Frith, DSTO Aeronautical Research Laboratory, Melbourne, AUSTRALIA; |
|
92-GT-083 |
| IGTI |
1992 |
Surface-Curvature-Distribution Effects On Turbine-Cascade Performance |
T. Korakianitis, P. Papagiannidis, Washington University, St. Louis, MO, USA; |
|
92-GT-084 |
| IGTI |
1992 |
A Study Of Stall In A Low Hub/Tip Ratio Fan |
M. oundranayagam, National Engineering Laboratory, Glasgow, SCOTLAND; .L. Elder, Cranfield Institute Of Technology, Bedford, ENGLAND |
|
92-GT-085 |
| IGTI |
1992 |
Investigation Of The Part-Load Performance Of Two 1.12 MW Regenerative Marine Gas Turbines |
T. Korakianitis, K. Beier, Washington University, St. Louis, MO, USA; |
|
92-GT-086 |
| IGTI |
1992 |
Development Of Gas Turbine Steam-Injection Water Recovery (SIWR) System |
H.B. Nguyen, A. den Otter, NOVA Corporation of Alberta, Edmonton, AB, CANADA; |
|
92-GT-087 |
| IGTI |
1992 |
Active Stabilization Of Compressor Instability And Surge In A Working Engine |
J.E. rowcs Williams, Cambridge University, Cambridge, UK; M.F.L. Harper, .J. Allwright, Topexpress Limited, Cambridge, UK |
|
92-GT-088 |
| IGTI |
1992 |
A Survey Of Platform Machinery In The North Sea |
L.E. Bakken, J.M. Overli, Statoil, Trondheim, NORWAY; |
|
92-GT-089 |
| IGTI |
1992 |
Experimental Analysis Of Transonic Flow Through The Variable Nozzle Of A Radial Inflow Turbine |
H.E. Gallus, U. Lingner, RWTH Aachen, Aachen, GERMANY; I. Ispas, Atlas Copco, Koln, GERMANY |
|
92-GT-090 |
| IGTI |
1992 |
Influence Of Blade Aerodynamic Loading On Efficiency Of Radial-Inflow Turbines |
T. Takamura, F. Nishiguchi, Nissan Motor Co., LTD, Yokosuka, JAPAN; |
|
92-GT-091 |
| IGTI |
1992 |
The Effects Of Blade Loading In Radial And Mixed Flow Turbines |
H. hen, M. Abidat, N.C. Baines, Imperial College, London, U.K.; M.R. irth, Holset Engineering Company, LTD, Huddersfield, U.K. |
|
92-GT-092 |
| IGTI |
1992 |
The Design And Evaluation Of A High Pressure Ratio Radial Turbine |
K.R. Pullen, N.C. Baines, Imperial College, London, U.K.; S.H. Hill, Rolls Royce plc, Herts, U.K. |
|
92-GT-093 |
| IGTI |
1992 |
Aerodynamic Design Of Pivotable Nozzle Vanes For Radial-Inflow Turbines |
M. Scholch, Universitat der Bundeswehr, Hamburg, GERMANY; |
|
92-GT-094 |
| IGTI |
1992 |
Markov Fatigue In Single Crystal Airfoils |
C. Annis, D.P. DeLuca, Pratt & Whitney, West Palm Beach, FL, USA; |
|
92-GT-095 |
| IGTI |
1992 |
Performance Evaluation Of Space Solar Brayton Cycle Power Systems |
Z.-G. Diao, Chinese Academy of Sciences, Beijing, CHINA; |
|
92-GT-096 |
| IGTI |
1992 |
Combined Closed Cycle (C 3) Systems For Underwater Power Generation |
A. Massardo, Universita di Genova, Genova, ITALY; G.M. Arnulfi, Universita di Udine, ITALY |
|
92-GT-097 |
| IGTI |
1992 |
Combined-Closed Gas Cycles For Terrestrial, Marine And Space Nuclear Power Systems |
Z.P. Tilliette, DMT/SERMA, Saclay, FRANCE; |
|
92-GT-098 |
| IGTI |
1992 |
Conceptual Study On Radiator Area Reduction Of Brayton Cycle Solar Dynamic Power |
Y. Tsujikawa, University of Osaka Prefecture, Sakai, JAPAN; |
|
92-GT-099 |
| IGTI |
1992 |
Condition Monitoring And Diagnostic Aspects Of Gas Turbine Transient Response |
C.B. Meher-Homji, R. Bhargava, Boyce Engineering International Inc., Houston, TX, USA; |
|
92-GT-100 |
| IGTI |
1992 |
Comparisons Of Recuperator Flow Distributions Of An Intercooled-Recuperative Marine Gas Turbine |
R.L. iang, J.L. Buyer, David Taylor Research Center, Annapolis, MD, USA; |