</ IMECHE Papers Conference Year Paper Title Paper Author Page Number Other IMechE  1976  Vibration in rotating machinery: malfunction diagnosis - art and science  E. Downham  1    IMechE  1976  Rotor vibration: the choice of optimal journal bearings   D. Morrison  7    IMechE  1976  Vibrations in cracked shafts  T. A. Henry and B. E. Okah-Avae  15    IMechE  1976  Characteristic vibrations of flexural rotors in journal bearings  E. Pollman and H. Schwerdtfeger  21    IMechE  1976  Numerical analysis of free vibrations of damped rotating structures  K. K. Gupta  27    IMechE  1976  Practice of flexible rotor balancing  A. Giers  33    IMechE  1976  Vibrations of a rotating asymmetric shaft carrying two disks, supported in asymmetric bearings  L. Forrai  43    IMechE  1976  Large amplitude whirls of rotors  G. Capriz and A. Laratta  49    IMechE  1976  The vibrational behaviour of a rotating shaft system containing a transverse crack  I. W. Mayes and W. G. R. Davies  53    IMechE  1976  A method for using the free shaft modes in rotor balancing  J. W. Lund  65    IMechE  1976  Acceptance criteria for compressors and turbines in the process industry based on the response to deliberate unbalance  P. E. Simmons  73    IMechE  1976  The solution of vibration problems with simple models  E. Kramer, R. Nordman and H. D. Klement  79    IMechE  1976  Error analysis of vibration of rotor/bearing system  T. Iwatsubo  87    IMechE  1976  On the determination of the influence coefficients in rotor balancing, using linear regression analysis  L. Larsson  93    IMechE  1976  The dynamics of a two rotor system with slipping clutch  J. Stewart  99    IMechE  1976  Normal mode interactions in self-excited rotor vibrations  E. Brommundt  105    IMechE  1976  A method of stabilizing externally-pressurized gas journal bearings  D. J. Woodford  111    IMechE  1976  Information from bearing vibrations  R. C. Hemmings and J.D. Smith  117    IMechE  1976  Dynamic behaviour of a simple rotor with a cross-sectional crack  R. Gasch  123    IMechE  1976  Systematic combination of experiments and data processing in balancing of flexible rotors  J. Drechsler  129    IMechE  1976  Effect of damping on the flutter boundary of rotating systems  K. Huseyin  133    IMechE  1976  The impact of rotor dynamics analysis on advanced turbo compressor design  R. Gordon Kirk  139    IMechE  1976  Modal resolution and balancing of synchronous vibrations in flexible rotors with non-conservative cross coupling  H. F. Black and S. M. Nuttall  151    IMechE  1976  Experimental methods for the study of the vibratory behaviour of steam turbine blades  R. Bigret  159    IMechE  1976  Studies to gain insight into the complexities of blade vibration phenomena  D. J. Ewins  165    IMechE  1976  Experimental studies on the shaft dynamics of large turbogenerators for an improved surveillance  A. Azzoni, A. Clapis, R. Gariboldi, G. Lapini, G. Possa and T. Rossini  173    IMechE  1976  The characteristics, prediction and test analysis of supersonic flutter in turbofan engines  D. G. Halliwell  181    IMechE  1976  Dynamic stiffness matrix approach for rotor-bearing system analysis  N. F. Rieger, C. B. Thomas and W. W. Walter  187    IMechE  1976  The dynamics of a Hooke's Joint Gyroscope with mass unbalance  J. S. Burdess and L.'Maunder  195    IMechE  1976  Modern influence coefficient techniques for multiplane rotor balancing in the factory, test cell and field  R. H. Badgley  201    IMechE  1976  Vibration problems on rotating machinery in the chemical industry  J. B. Erskine and C. W. Reeves  209    IMechE  1976  Vibrational problems in modern power station plant  W. G. R. Davies, A. W. Lees, 1. W. Mayes, J, H. Worsfold and F. J. P. Crampton  215    IMechE  1976  Vibration analysis as an aid to the detection and diagnosis of faults in rotating machinery  R. M. Stewart  223    IMechE  1976  Dynamic analysis of rotating turbine and compressor blading  J. Thomas and C. A. Mota Soares  231    IMechE  1976  A strategy for investigating the linear dynamics of a rotor in bearings  I. Fawzy and R. E. D. Bishop  239    IMechE  1976  On piston slap in reciprocating machinery  Y. Fujimoto, T. Suzuki and Y. Ochiai  245    IMechE  1976  The whirl modes of vibration of a crankshaft  D. Hodgetts  255    IMechE  1976  The modal interpretation of the vibration of a damped rotating shaft  A. G. Parkinson  263    IMechE  1976  A theoretical and experimental investigation illustrating the influence of non-linearity and misalignment on the eight oil film force coefficients  R. H. Bannister  271    IMechE  1976  Investigations into load dependent vibrations of the high pressure rotor on large turbo-generators  S. H. Greathead and P. Bastow  279    IMechE  1976  The investigation method of wear effects on dynamic parameters of rotating systems  V. 1. Postnikov and A. S. Pronikov  287    IMechE  1976  Stabilization of turbomachinery with squeeze film dampers – theory and applications  E. J. Gunter, L. E. Barrett and P. E. Allaire  291    IMechE  1976  Characteristics of a magnetic rotor bearing for active vibration control  G. Schweitzer and R. Lange  301    IMechE  1980  Recognition of the causes of rotor vibration in Turbomachinery  D M Smith  1    IMechE  1980  Defining the machine/foundation interface  P E Simmons  5    IMechE  1980  Stresses of turbogenerator shafts and foundations caused by electrical system faults  Th. Jainsky  9    IMechE  1980  A method of calculating the vibrational behaviour of coupled rotating shafts containing a transverse crack  I W Mayes, W G R Davies  17    IMechE  1980  Vibration of a rotating shaft passing through two critical speeds  S Yanabe, A Tamura  29    IMechE  1980  A new branching technique for the static and dynamic analysis of geared systems  L D Mitchell  37    IMechE  1980  Analysis and design of centrifugal pumps considering rotor dynamics  M Takagi, O Matsushita, T Iino, K Kikuchi, K Komatsu  43    IMechE  1980  Flow induced spring constants of labyrinth seals  H Benckert, J Wachter  53    IMechE  1980  Processing surplus information in computer aided balancing of large flexible rotors  J Drechsler  65    IMechE  1980  Dynamic pressure determination in a squeeze-film damper  R Holmes, M Dede  71    IMechE  1980  A physical explanation of parametric instabilities in unsymmetric rotors  D A Peters, I Zvolanek  77    IMechE  1980  Investigation of a d.c. motor vibration problem  D France, H Grainger  83    IMechE  1980  Instability threshold of an unbalanced. rigid rotor in short journal bearings  J W Lund, H B Neilson  91    IMechE  1980  Further studies of bladed disc vibration: effects of packeting  D J Ewins  99    IMechE  1980  Vibration spectra from gear drives  A W Lees, P C Pandey  103    IMechE  1980  Modal dynamic simulation of flexible shafts in hydrodynamic bearings  H F Black, R D Brown  109    IMechE  1980  The selection of couplings for engine test beds  C A Beard  115    IMechE  1980  An instrument for the measurement of long-term variations of vertical bearing alignments in turbogenerators  A Clapis, G L Lapini, T Rossini  119    IMechE  1980  Analysis of high pressure oil seals for optimum turbocompressor dynamic performance  R G Kirk, J C Nicholas  125    IMechE  1980  On the dynamic behaviour of gyroscopic systems that include lubricated journal bearings  H McCallion, P M Ware  133    IMechE  1980  On the influence of casing stiffness in turbomachinery vibration analysis  S S Stecco, M Pinzauti  139    IMechE  1980  The role of sum and difference frequencies in rotating machinery fault diagnosis  R L Eshleman  145    IMechE  1980  Magnetic bearings - a novel type of suspension  G Schweitzer, H Ulbrich  151    IMechE  1980  Some damping and stiffness characteristics of angular contact bearings under oscillating radial load  T L H Walford, B J Stone  157    IMechE  1980  Fault diagnosis of gears using spectrum analysis  J I Taylor  163    IMechE  1980  Advances in the application of cepstrum analysis to gearbox diagnosis  R B Randall  169    IMechE  1980  Estimation of seal-bearing stiffness and damping parameters from experimental data  S B Childs, D W Childs, J Dressman  175    IMechE  1980  On the occurrence of unstable vibrations of a shaft having either asymmetrical stiffness or asymmetrical rotor, supported by asymmetrical flexible pedestals  H Ota, K Mizutani  181    IMechE  1980  Monitoring rolling contact bearings under adverse conditions  A G Ray  187    IMechE  1980  Vibration analysis of large rotor-bearing-foundation-systems using a modal condensation for the reduction of unknowns  M Jacker  195    IMechE  1980  Reduction of twice per revolution vibration levels due to weight effect in large turbogenerators  M Bachschmid, G Diana  203    IMechE  1980  Stall flutter of linear cascade in compressible flow  S Kaji  209    IMechE  1980  Spring and damping coefficients of the labyrinth seals  M Kurohashi, Y Inoue, T Abe, T Fujikawa  215    IMechE  1980  Experiments on the dynamic characteristics of large scale journal bearings  S Hisa, T Matsuura, T Someya  223    IMechE  1980  Identification of stiffness and damping coefficients of journal bearings by means of the impact method  R Nordmann, K Schollhorn  231    IMechE  1980  Drive trains in printing machines  J D Furley, J A Jefferis, J D Smith  239    IMechE  1980  Analytical nonlinear bearing calculations using a variational approach  L E Barrett, P E Allaire, D F Li  247    IMechE  1980  Balancing flexible rotors as a problem of mathematical programming  M Balda  253    IMechE  1980  Balancing of a double overhung compressor with skewed wheels and a bowed shaft  D J Salamone, E J Gunter, L E Barrett  259    IMechE  1980  Forced backward whirling of aircraft propeller-engine systems  H Crandall  265    IMechE  1980  The transient response of turbo alternator rotor systems under short-circuiting conditions  J S Rao, D K Rao  271    IMechE  1980  Identification of journal bearing coefficients using a pseudo-random binary sequence  I U Dogan, J S Burdess, J R Hewit  277    IMechE  1980  Relative energy concepts in rotating system dynamics  T S Done  283    IMechE  1980  Instabilities of parametric rotor-support systems  J Krodiewski, K Marynowski, Z Parszewski  289    IMechE  1980  A theoretical and experimental analysis of the rotor dynamics of a high pressure steam turbine on a large ammonia plant  N Hensman, C W Reeves, A V Ruddy, C M Taylor  297    IMechE  1980  Experimental and analytical research on a full scale turbine journal bearing  G Diana, D Borgese, A Dufour  309    IMechE  1980  Vibration aspects of rolling mill horizontal drives with reference to recent coupling development  C Patterson, J L Wearing, J D Fletcher  315    IMechE  1980  Seismic response of a flexible rotor  T Shimogo, Y Adia, M Nakano  321    IMechE  1980  Dynamically tuned gyroscopes and their spin axis bearings  D G Bonfield, D J Haines  327    IMechE  1980  Computation of vibrations of the coupled system machine-foundation  E Kramer  333    IMechE  1980  A contribution for the calculation of intermittent vibrations of electrically driven rotors  U Hollburg  339    IMechE  1980  Effects of vibrations generated by spin axis bearings on gyroscopic northfinding equipment  T Trayner  347    IMechE  1980  The specification and development of a standard for gearbox monitoring  R M Stewart  353    IMechE  1980  Theoretical and experimental investigation into the effectiveness of squeeze-film damper bearing without a centralising spring  R A Cookson, S S Kossa  359    IMechE  1980  Gyroscopes with ball bearing suspension  V F Zhuravlev, D M Klimov  367    IMechE  1980  Labyrinth seal effects on rotor whirl instability  B T Murphy, J M Vance  369    IMechE  1980  Experimental study of an inter-shaft squeeze film bearing  J B Courage  375    IMechE  1980  A new analysis procedure for noise and vibration diagnosis of rotating machinery  G Hauser  381    IMechE  1980  Dynamics of high speed rotative assemblies  D A Thurgood  389    IMechE  1980  The effects of unbalance on stability and its influence on non-synchronous whirling  R H Bannister, J Makdissy  395    IMechE  1980  Further investigations into load dependent low frequency vibration of the high pressure rotor on large turbogenerators  S H Greathead, M D Slocombe  401    IMechE  1980  Double-frequency accelerations in turbogenerator rotors resulting from anisotropy in the bearings  W Kellenburger  415    IMechE  1980  Automatic balancing of grinding wheels  H Kaliszer  421    IMechE  1980  Torsional vibrations during the starting process in driving systems with three phase motors  H Peeken, G Diekhans  427    IMechE  1980  A unified approach to flexible rotor balancing: outline and experimental verification  M S Darlow, A G Parkinson  437    IMechE  1980  A technique for modelling rotors from measured vibration characteristics  G B Thomas, P Littlewood  445    IMechE  1980  Determination of the unbalance and the dynamic characteristics of a flexible rotor under non-stationary conditions  L N Shatalov  453    IMechE  1980  Automatic balancing of rotors  A A Gusarov, L N Shatalov  457    IMechE  1984  Keynote address--Some recent advances in rotor dynamics  R L Eshleman  xi    IMechE  1984  The influence of the elastic half-space on stability and unbalance response of a simple rotor-bearing foundation system  R Gasch, J Maurer, W Sarfeld  1    IMechE  1984  Calculations of long rotors with many bearings on a flexible foundation  Z Wang, W Lund  13    IMechE  1984  A study on oil whip for a shaft supported by multi-bearings  Y S Sasaki, H T Tomita  17    IMechE  1984  Rotor dynamic analysis of a nuclear heat transport pump under normal and part void conditions  P E Allaire, L E Barrett, R D Flack, F W Barton, J D Knight  23    IMechE  1984  Special problems of rotor dynamics in the design of superconducting generators with multi-shell rotors  H L Berger, T S Kulig  31    IMechE  1984  Transient vibrations in large rotor-bearing systems  K Krynicki, K Marynowski  39    IMechE  1984  Natural frequencies of shell-centrifuges  L Papa, R Telefono  45    IMechE  1984  Stability analysis of rotor-bearing system subject to cross-coupling force  M Kurohashi, T Fujikawa, R Kawai, T Tlwatsubo  51    IMechE  1984  The coupled lateral torsional vibration of a geared motor system  T Iwatsubo, S Arii, R Kawai  59    IMechE  1984  Coupled torsional-flexural vibration of a shaft in a geared system  H Iida, A Tamura  67    IMechE  1984  Dynamic loads in gear teeth  A W Lees  73    IMechE  1984  Dynamic behaviour of high speed gears  F Kucukay  81    IMechE  1984  Vibration monitoring strategy for large turbo-generators  D L Thomas  91    IMechE  1984  Separating excitation and structural response effects in gearboxes  R B Randall  101    IMechE  1984  Kalman filters applied to time-domain estimation of linearized oil-film coefficients  M N Sahinkaya, C R Burrows  109    IMechE  1984  A review of rolling element bearing health monitoring (III): preliminary test results on eddy current proximity transducer technique  P Y Kim  119    IMechE  1984  Generalized criteria for the evaluation of torsional vibration dampers  K Federn  127    IMechE  1984  Mechanical damping of torsional vibrations in turbo-generators due to network disturbances  C J Cudworth, J R Smith, F Mykura  139    IMechE  1984  Identification of time-dependent exciting vectors and their further processing presented by means of torsional vibrations  E R Koehler, S W P Liebig, A Lingener  145    IMechE  1984  Plain seal dynamic behaviour--experimental and analytical results  M Falco, G Mimmi, B Pizzigoni, C Marenco, C Negri  151    IMechE  1984  Experimental study on the dynamic characteristics of pump annular seals  K Kankiand, T Kawakami  159    IMechE  1984  Identification of stiffness, damping and mass coefficients for annular seals  R Nordmann, H Massman  167    IMechE  1984  Vibrational behaviour of a rotor with a cross-sectional crack  J Schmied, E Kramer  183    IMechE  1984  The influence of unbalance on cracked rotors  N Bachschmid, G Diana, B Pizzigoni  193    IMechE  1984  Even multiple vibrations of a rotating shaft due to secondary moment of a universal joints  H Ota, M Kato  199    IMechE  1984  Static and dynamic characteristics of annular plain seals  S Kaneko, Y Hori, M Tanaka  205    IMechE  1984  Experimental measurement of lateral force in a model labyrinth and the effect on rotor stability  R D Brown, Y M M S Leong  215    IMechE  1984  Finite length solutions for the rotor dynamic coefficients of constant-clearance and convergent-tapered annular seals  D W Childs  223    IMechE  1984  Acoustically excited vibration of compressor blades  R Parkera, S A T Stoneman  233    IMechE  1984  Non-steady forces in turbomachine stage  J S Rao, V V R Rao, V Seshadri  243    IMechE  1984  Numerical analysis of transient responses in blade dynamics  H Irretier  255    IMechE  1984  Stability of offset journal bearing systems  J F Booker, S Covindachar  269    IMechE  1984  A linearized stability analysis of rigid and flexible rotors in plain hybrid (hydrostatic/hydrodynamic) journal bearings  W B Rowe, F S Chong Weston, W  277    IMechE  1984  The effect of manufacturing tolerances on the stability of profile bore BEARINGS  F A Martin Ruddy, A V  287    IMechE  1984  The prediction and measurement of bearing transfer functions at high frequencies  C J Jenkins, L V Embling, D A Cordner  295    IMechE  1984  Calculated and measured natural frequencies of low pressure steam turbine blades and wheels with arch-coverbands  P Kelen  303    IMechE  1984  Some practical aspects of the interpretation of coupled LP-stage vibration  J Wachter, J Jarosch, P Pfeiffer  311    IMechE  1984  On the long arc coupling of steam turbine buckets  O Tuncel, R A Walter, A B Dodd Jr  319    IMechE  1984  Partial lateral rotor to stator rub  A Muszynska  327    IMechE  1984  Brake squeal problem in underground trains  J S Rao, N F Rieger  337    IMechE  1984  Chatter coupled vibrations of a large vertical lathe, rotating table and its tools slide  Z A Parszewski Chalko, T J  349    IMechE  1984  The dynamics of precession of a supporting centrifuge with the cavity partially filled with a viscous fluid  U A Djoldasbekov, E R Rakhimov , A S Rakhmatullaev  357    IMechE  1984  The equations of motion of N-bladed propellers with arbitrarily positioned hinges and their application to an experimental one-bladed wind turbine  M Person  363    IMechE  1984  Double frequency forced vibration of turbine blades due to an elliptical orbit of the rotor  W Kellenberger  373    IMechE  1984  The dynamics of a flexible bladed disc on a flexible rotor in a two-rotor system  V C Gallardo, M J Stallone  383    IMechE  1984  Vibration modal analysis by means of impulse excitation and measurement using strain gauges  L Y Yi, F R Kongand , Y S Chang  391    IMechE  1984  Insights from applied field balancing of turbomachinery  R C Kirk  397    IMechE  1984  Computer aided balancing system for mass-produced turbo-rotors  K Nishimoto, S Morii, A Tanba, H Ohsawa  409    IMechE  1984  Stability of an eccentric partially filled centrifuge  R L Pendleton, Z H Lu  419    IMechE  1984  Application of quasi-modal concept to rotational ratio response analysis and new balancing  O Matsushita, M Ida, R Takahashi  427    IMechE  1984  Sub-rotational speed axial vibrations of shafts in rotating machinery  D Dyer  439    IMechE  1984  Non-linear vibrations of a textile machine rotor  L J Cveticanin  447    IMechE  1984  Non-linear dynamics of flexible rotor systems  M T M Crooijmans, A de Kraker, D H van Campen  451    IMechE  1984  Rotor dynamics of reciprocating compressors  M F White, H Engja, M Loerum  457    IMechE  1984  Response due to a momentarily created unbalance  H Alberg  465    IMechE  1984  A new view on balancing flexible rotors  M Balda  471    IMechE  1984  Theory on balancing of a flexible rotor by driving torque excitation  K Ono  475    IMechE  1984  Vibration problems with thermally induced distortions in turbine-generator rotors  Y Hashemi  481    IMechE  1984  Large unbalance vibration in steam turbine-generator sets  M L Adams, T H McCloskey  491    IMechE  1984  Non-linear unbalance response and stability thresholds of a warped multimass rotor in misaligned bearings  H Springer, H Ecker, E J Gunter  499    IMechE  1984  Equivalent stiffness and damping coefficients for squeeze film dampers   E J Hahn  507    IMechE  1984  State variable feedback control of rotor-bearing suspension systems  R Stanway, O Reilly  515    IMechE  1984  Optimum vibration control of flexible transmission shafts  F Kaya, J B Roberts  525    IMechE  1984  Variable impedance bearings for turbogenerator rotors  M J Goodwin, J E T Pennyand , C J Hooke  535    IMechE  1984  Theory and application of magnetic bearings with integrated displacement  H Ulbrich, E Anton  543    IMechE  1984  Modelling and control of a flexible rotor with magnetic bearings  J Salm, G Schweitzer  553    IMechE  1988  Anti-earthquake considerations in rotordynamics  Y Hori  1    IMechE  1988  Turbomachinery field balance techniques--three case histories  C Jackson  9    IMechE  1988  Control strategies for use with magnetic bearings  C R Burrows, M N Sahinkaya  23    IMechE  1988  Active synchronous response control of rigid-body rotors  B G Johnson, R L Hockne, K M Misovee  33    IMechE  1988  The active magnetic bearing enables optimum control of machine vibrations  H Zlotykamien  41    IMechE  1988  Magnetic bearing design optimization  J Imlach, P E Allaire, R R Humphris, L E Barrett  53    IMechE  1988  An active support system for rotors with oil-film bearings  S Furst, H Ulbrich  61    IMechE  1988  The use of fluid swirl to control the vibration behaviour of rotating machines  J A Hart, R D Brown  69    IMechE  1988  Stabilization by cross stiffness control of electromagnetic damper for contained liquid rotor unstable vibration  O Matsushita, M Takagi, M Yoneyama, I Saitoh, A Nagata, M Aizawa  77    IMechE  1988  An analysis of combined squeeze-film and variable stiffness hydrostatic bearings, and their use in aircraft engine vibration control  M J Goodwin, M P Roach, J E T Penny  85    IMechE  1988  Analysis and test results of two centrifugal compressors using active magnetic bearings  R C Kirk, J F Hustak, K A Schoeneck  93    IMechE  1988  Active electromagnetic suspension and vibration control of an elastic rotor with a signal processor  H Bleuler, J Salm  101    IMechE  1988  Microprocesor-controlled automatic balancing systems  H Kaliszer, A Holnicki, M Orlowski  109    IMechE  1988  Structural loads due to surge in an axial compressor  N T Birch, J B Brownell, A M Cargil, M R Lawson, R J Parker, K G Tillen  117    IMechE  1988  The influence of damping and angular acceleration on the vibratory response of rotating beam-like blades passing through resonance  H Irretier  125    IMechE  1988  Gasdynamic damping properties of steam turbine blades  N F Rieger  135    IMechE  1988  A probabilistic analysis of mistuned bladed turbine disc  M P Singh, D J Ewins  143    IMechE  1988  Free vibration of the mistuned bladed disc  R Rzadkowski  151    IMechE  1988  The dynamics of n-bladed propellers with arbitrarily positioned hinges under the influence of aerodynamic forces  M Person  163    IMechE  1988  Interpretation of strain gauge results for gas turbine engines with aid of finite element analysis  R Elliott, A K McBride  177    IMechE  1988  On critical speeds of rotating discs  W Seemann, J Wauer  185    IMechE  1988  Strategies for the vibration analysis of a large turbocharger  J B Turnbull, G M Chapman  193    IMechE  1988  Identification of turbomachinery foundations from run-down records -- a preliminary experimental study  T K Tee, R Stanway, J E Mottershead, A W Lees  201    IMechE  1988  The least squares method applied to identify rotor/foundation parameters  A W Lees  209    IMechE  1988  A method to identify the foundation modal parameters through measurements of the rotor vibrations  G Diana, F Cheli, A Vania  217    IMechE  1988  Impact excitation tests of a rotor supported in ball-bearings  J Tonnesen, J W Lund  223    IMechE  1988  A procedure for identifying non-linearity in rigid rotors supported in hydrodynamic and ball/roller bearing systems  L Garibaldi, G R Tomlinson  229    IMechE  1988  Improvement to prediction accuracy of stability limits and resonance amplitudes using instability-threshold-based journal bearing rotordynamic coefficients  M Rashidi, M L Adams  235    IMechE  1988  The application of the model reference adaptive system in the identification of dynamic characteristics of oil-film bearings  W Kang, D Jin  241    IMechE  1988  Practical considerations on the rotordynamic behaviour and design of high speed multi-stage pumps  J J Verhoeven  247    IMechE  1988  The influence of seals on the dynamics of turbopumps  W Diewald, R Nordmann, C Ast, C Herzer, C Vogel  259    IMechE  1988  'Wet critical speeds' of boiler feed pump beyond the pump operational range  G Marenco  265    IMechE  1988  The influence of torsional-lateral-coupling in geared rotor systems on its eigenvalues, modes and unbalance vibrations  P Schwibinger, T Neumer, A Zurbes, R Nordmann  279    IMechE  1988  Vibration and noise of a geared rotor system -- considered lateral and torsional motion  T Iwatsubo  289    IMechE  1988  The dynamics of a rotor with rubbing  A de Kraker, M T M Crooijmans, D H van Campen  297    IMechE  1988  Dynamic instability of multi-degree-of-freedom flexible rotor systems due to full annular rub  W Zhang  305    IMechE  1988  Effect of bearing alignment on stability threshold and post-stability behaviour of rotor-bearing systems  Z A Parszewski, K Krynicki, E D Kirby  311    IMechE  1988  A study of non-steady stability of a rotor journal bearing system--stability of the 360 short bearing  T Inagaki, T Kawakami, T Osada  317    IMechE  1988  Fluid-induced shaft vibrations in rotary atomizers  J Colding-Jorgensen  325    IMechE  1988  On the natural frequencies and stability of a Laval rotor subjected to follower force  K Czolczynski , K P Marynowski  333    IMechE  1988  Stability of the textile machine rotor  L Cveticanin, M Zlokalica  337    IMechE  1988  Dynamic loading and response of reciprocating compressor bearings  A J Smalley, M F White  341    IMechE  1988  An analysis of the steady state and dynamic characteristics of a cylindrical-spherical floating ring bearing  P S Leung, I A Craighead, T S Wilkinson  349    IMechE  1988  One-dimensional finite element analysis of multiple-pad pressure dam bearings  T Okia, P E Allaire  359    IMechE  1988  Non-linear effects in lubricated bearings   G Diana, F Cheli, A Manenti, F Petrone  365    IMechE  1988  Clearance effects on leakage and rotordynamic coefficients of smooth, liquid annular seals  D W Childs, S Nolan, D Nunez  371    IMechE  1988  Finite difference analysis of rotordynamic seal coefficients for an eccentric shaft position  R Nordmann, F J Dietzen  379    IMechE  1988  Evaluation of liquid and gas seals for improved design of turbomachinery  R G Kirk, J F Husrak, K A Schoeneck  387    IMechE  1988  Some in-field experiences of non-repeatable behaviour in the dynamics of rotating machinery  C Frigeri, G A Zanetta, A Vallini  395    IMechE  1988  The diagnosis of faults of a turbine set  X W Jiang, F Wang, C F Dong  405    IMechE  1988  Comparison between computed and measured vibrations of turbomachines  E Kramer, L Eckert  411    IMechE  1988  In-service vibration levels on large turbine generators  H Ellam, D L Thomas  419    IMechE  1988  Turbogenerator layout for optimal dynamic response--a study and a case history  Z A Parszewski, T J Chalko, D-X Li  427    IMechE  1988  Prediction and measurement of vibrations of pump rotors  E T Buehlmann, R Stuerchler, A Frei, E Leibundgut, S E Page  435    IMechE  1988  A method for overall condition monitoring by controlling the efficiency and vibration level of rotating machinery  E H Gottlieh  445    IMechE  1988  Application of an expert system to rotating machinery health monitoring  J W Hill, N C Boines  449    IMechE  1988  A microcomputer-based vibration diagnostic system for steam turbines and generators  Y W Kuo  455    IMechE  1988  Dynamic behaviour of the Laval rotor with a cracked hollow shaft--a comparison of crack models  R Gasch, M Person, B Weitz  463    IMechE  1988  Theoretical research, calculation and experiments of cracked shaft dynamic  B C Wen, Y B Wang  473    IMechE  1988  Bimodal (complex) balancing of large turbogenerator rotors having large or small unbalance  W Kellenberger, P Rihak  479    IMechE  1988  Balancing turboset rotors as evolutionary systems  M Balda  487    IMechE  1988  Turbine generator trim balancing using optimized least squares methods  A F P Sanderson  491    IMechE  1988  An improved least squares method for calculating balancing correction masses  H Gu, H R Ren, J M Yang  499    IMechE  1988  Experimental study on balancing of flexible rotor by torsional excitation  K Ono, Y Nakayama  505    IMechE  1988  Balancing of flexible rotors with one transient run--an experimental and theoretical investigation  R de Silva  511    IMechE  1988  Balancing of jet engine modules  H Sehneider  523    IMechE  1988  Calculation of unbalance sensitivity in complex rotor systems  H-L Olausson, A Klang  531    IMechE  1988  Unbalance response analysis of rotor bearing systems with spin speed dependent parameters  S-W Hong, C-W Lee  539    IMechE  1988  Thermally induced unbalance Or generator rotors due to blocked gas cooling ducts  D Dyer, D J Williams, D M Ward, T C Neilson  547    IMechE  1988  Unbalance and vibration control in a large geotechnical centrifuge  A J A Giers, D Thlen  555    IMechE  1988  Problems associated with low frequency vibrations induced by rotating ride equipments  M S Leong  561    IMechE  1988  Conservative and nonconservative coupling in dynamic systems  S H Crondall, J W Mrosczyk  567    IMechE  1988  Effects of loose rotating parts on rotordynamics  A Muszynska  573    IMechE  1988  Vibration transmission characteristics of a marine diesel driveshaft installation  R Kinns, Z Chowaniec  579    IMechE  1988  Response of two elastically supported rigid rotors sharing a common discontinuously non-linear support  R D Neilson, A D S Barr  589    IMechE  1988  Dynamic response of a dual-rotor system by extended transfer matrix method  K D Gupta, K Gupta, J S Rao, K V B Sarma  599    IMechE  1988  The dynamic analysis of a multi-shaft rotor-bearing-case system  Z-C Zheng, Y Hu  607    IMechE  1988  A finite element approach to the aeroelastic analysis of flexible rotors attached to flexible supports  A D Garrad, M H Patel  615    IMechE  1988  An expert system interface to a suite of rotordynamics programs  G B Thomas, R C Thomas, C C Lai  621    IMechE  1988  Non-linear dynamic analysis Or flexible rotors  M Geradin, N Kill  627    IMechE  1988  The transient response of a three-level rotor system subjected to a seismic environment  R Subbiah, S Zhou, N F Rieger  635    IMechE  1988  Transient response of a rotor beam excited by impulsive loading at the fixed end  J F Bratt  641    IMechE  1988  Unstable vibration of a rotor with a transverse crack  A Tamura, Y Iwata, H Sato  647    IMechE  1988  The development and practical application of rotordynamic analysis techniques for large steam turbine generators  P M McGuire, D W Price  655    IMechE  1992  On the discrepancies between experiment and theory for a cylindrical fluid-film journal bearing considering steady-state and dynamic characteristics   C M Myllerup, J Tonnesen and J W Lund  1  C432/058  IMechE  1992  Seismic response of a linearly stable multirotor system  T Kato, K Koguchi and Y Hori  7  C432/031  IMechE  1992  Unsteady forces in a turbomachine stage – experimental verification   J S Rao, P B Sharma, K V Subba Rao and S Tandon  13  C432/008  IMechE  1992  TUBSIM - a computer program package for forced vibrations and life estimation of turbine blades for stationary and transient operations   M Hohlrieder, H lrretier and A Kayser  21  C432/040  IMechE  1992  Calculations and experiments on the stress and vibration properties of a bladed compressor disk   N F Rieger, T C T Lam and M L Redding  33  C432/132  IMechE  1992  Dynamic strain gauge measurements and resonance endurance tests performed on a turbocharger axial turbine   B Phillipsen  43  C432/075  IMechE  1992  Statistical analysis of random mistuning of bladed assemblies   K y Sanliturk, M lmregun and D J Ewins  51  C432/110  IMechE  1992  Predicting the randomness of forced vibration response of a bladed disc   M P Singh  59  C432/128  IMechE  1992  Turbine blade assemblies and their vibration characteristics   K Namura, E Saito, A Okabe and K lkeuchi  65  C432/094  IMechE  1992  Vibration characteristics of integrally-shrouded blades   E Swain, G M Chapman and M Yang  73  C432/080  IMechE  1992  Active magnetic bearing control strategies for solving vibration problems in industrial rotor systems   R Larsonneur, R Siegwart and A Traxler  83  C432/088  IMechE  1992  Active bearing load capacity requirements for rotating shafts   E H Maslen and P E Allaire  91  C432/114  IMechE  1992  Stability of centrifugal compressors by applications of tilt pad seals, damper bearings and shunt holes   E A Memmott  99  C432/070  IMechE  1992  Active control of a flexible rotor by magnetic bearing - effect of power amplifier on unbalance response of rotor   Y Kanemitsu, M Ohsawa and K Watanabe  111  C432/023  IMechE  1992  Decentralized control schemes for minimising vibration in a multiaxis rotor isolation system   Shengbiao Li  115  C432/004  IMechE  1992  New directions in vibration control   O A Brooks  125  C432/010  IMechE  1992  H-infinity controller design for active vibration control of a flexible rotor   C Mu, p S Keogh and c: R Burrows  131  C432/138  IMechE  1992  A fast hydraulic actuator for active vibration control   J Althaus and H Ulbrich  141  C432/045  IMechE  1992  Optimal design of supercritical, composite shafts with axially varying fibre lay-up   J Creonte and M S Oarlow  149  C432/056  IMechE  1992  Vibration and noise excitation in the timing gear train of diesel engines   M Wilhelm and B Spessert  155  C432/122  IMechE  1992  Identification methods in the dynamics of turbogenerator rotors   G A Zanetta  173  C432/092  IMechE  1992  Identification of bearing dynamic coefficients by using measured and computed unbalance responses in flexible rotor-bearing systems   S-W Hong and C-W Lee  183  C432/074  IMechE  1992  Parameter identification for non-linear rotor-stator systems - the Volterra/Wiener based approach   E A Odiari and D J Ewins  193  C432/111  IMechE  1992  Stability analysis of a rotor with parameter uncertainties   S Katsumata  203  C432/125  IMechE  1992  Instability for inclinational vibrations of an asymmetrical shaft driven through a universal joint   K Mizutani and H Ota  209  C432/085  IMechE  1992  Stability of axial oscillations in pumps using hydrostatic thrust bearings   D W Bilyk  215  C432/005  IMechE  1992  Dynamic loads in geared transmission systems in mining machinery   J Rosinski  227  C432/077  IMechE  1992  Correction of vibration problems on an HP steam turbine due to clearance in bearing housing and to a permanent rotor distortion   G L Lapini, R Vario, A Vallini, G Diana and A Vania  233  C432/067  IMechE  1992  Troubleshooting power plant rotating machinery vibration problems using computational techniques: case histories   T H McCloskey and M L Adams  239  C432/137  IMechE  1992  Development of a large capacity stator blade control axial compressor   I Matsumoto, M Gotoh, H ltaka and H Arimura  251  C432/096  IMechE  1992  Torsional/lateral vibration cross-coupled responses due to shaft anisotropy: a new tool in shaft crack detection   A Muszynska, P Goldman and D E Bently  257  C432/090  IMechE  1992  The vibration behaviour of a large steam turbine generator during crack propagation through the generator rotor   A F P Sanderson  263  C432/102  IMechE  1992  Detection of a transverse crack in a rotor shaft by adding external force   T Iwatsubo, S Arii and A Oks  275  C432/093  IMechE  1992  A study of cracks influence on the modal characteristics of rotors   L Hamidi, J-B Piaud and M Massoud  283  C432/066  IMechE  1992  Crack detection in rotating shafts - an experimental study   M Uao and R Gasch  289  C432/106  IMechE  1992  Bearing parameter identification using power spectral density methods   C Rouvas, B T Murphy and R K Hale  297  C432/151  IMechE  1992  Experimental rotordynamic and leakage results for short (L/D=1/6) honeycomb and smooth annular pressure seals   D W Childs and G F Kleynhans  305  C432/003  IMechE  1992  The effects of thermal stress on seal dynamics   Bo-Suk Yang and T Iwatsubo  311  C432/020  IMechE  1992  Dynamic characteristics of long annular seals in centrifugal pumps   R D Brown and M Ismail  315  C432/112  IMechE  1992  Dynamic characteristics of journal bearings with partially concave surfaces - effect of inclination of wear dent   M Tanaka  325  C432/068  IMechE  1992  Dynamic characteristics of a swing pad bearing applied to a horizontal rotor   K Iwamoto  331  C432/017  IMechE  1992  An analysis of the steady state and dynamic characteristics of a spherical journal bearing with axial loading   I A Craighead and P S Leung  337  C432/016  IMechE  1992  An investigation of the effects of dynamically skewed journal and shaft axes on rigid-rotor stability.   P J Ogrodnik and M J Goodwin  345  C432/072  IMechE  1992  The static and dynamic characteristics of 23 inch (584.2mm) diameter journal bearing   H Sakakida, S Asatsu and S Tasaki  351  C432/057  IMechE  1992  Experimental evaluation of fluid-film bearings using electromagnetic shaft loading and evidence of localized thermal distortion   E E Swanson and R G Kirk  359  C432/048  IMechE  1992  Experimental determination of hydrostatic journal bearing rotordynamic coefficients  M L Adams, J T Sawicki and R J Capaldi  365  C432/145  IMechE  1992  Design of speed changing gearbox fluid film support bearings for minimum vibrations and maximum life  J R Bielk  375  C432/113  IMechE  1992  Analysis of gear vibration signatures by the weighted Wigner-Ville distribution   P D McFadden and W J Wang  387  C432/134  IMechE  1992  Detection of gear damage by statistical vibration analysis   H R Martin  395  C432/006  IMechE  1992  Predicting the remaining life of rolling element bearings   A F Khan, E J Williams and C H J Fox  403  C432/037  IMechE  1992  On the use of laser vibrometry for rotating machinery measurements   S J Rothberg and N A Halliwell  409  C432/078  IMechE  1992  Optical diagnostic techniques for condition monitoring: vibration and magnetic field measurement   R P Tatam  417  C432/129  IMechE  1992  Techniques for remote monitoring and processing of large quantities of on-line vibration data   D N Futter, G Hewitt, I W Mayes and T K Tee  425  C432/082  IMechE  1992  Integration or differentiation: the optimum way to monitor pump vibration levels   S A Lloyd and P Ansley- Watson  433  C432/148  IMechE  1992  An on-line vibration analysis system for a marine gas turbine   A J Mundin and A J Penter  441  C432/099  IMechE  1992  Experimental investigations on the use of gated vibration analysis for condition monitoring in reciprocating machines   M S Leong and K B Lim  451  C432/104  IMechE  1992  Diagnosis on hydroelectric machinery   R Cardinali, D Weber and R Nordmann  461  C432/019  IMechE  1992  Equations of motion of a shaft-rotor system with variable rotating speed   M Kato, H Ota and S Nakamura  469  C432/101  IMechE  1992  The use of perturbation theory in structural and rotor dynamics   A W Lees  475  C432/018  IMechE  1992  Probabilistic rotor dynamic analysis using the fast probability integral   A J Smalley, H R Millwater, Y-T Wu and B F Evans  485  C432/044  IMechE  1992  Improvement of a transient vibration by sensitivity analysis   H Iida and S Kato  493  C432/084  IMechE  1992  Dynamic analysis of the motor for a downhole electric submersible pump   M F White, E A Torbergsen, O H ]acobsen and V A Lumpkin  499  C432/026  IMechE  1992  Identification of fluid-structure interactions in centrifugal pumps   T U Neumer, T Feng, R Nordmann, J Verhoeven, D M A P De Vis  509  C432/064  IMechE  1992  The causes of torsional resonance in reciprocating engines and pumps at other than integer multiples of the fundamental excitation frequency   D C Hesterman and B J Stone  517  C432/041  IMechE  1992  The vibrations of mechanical and electromagnetic coupling of an a.c. motor in the starting process   J Qiu  523  C432/121  IMechE  1992  A combined finite element/transfer matrix approach for including foundation effects on the vibration behaviour of rotating machinery   N Feng, E J Hahn, A Lattab and A Sestieri  529  C432/142  IMechE  1992  Dynamic considerations of flexible foundations for large turbogenerators   P S Leung  535  C432/069  IMechE  1992  Supporting structure effects on rotating machinery vibrations   F Cheli, K L Cavalca, F G Dedini and A Vania  543  C432/119  IMechE  1992  Modelling a turbo-machine for complex eigenfrequency calculations and dynamic response prediction - application to vibration control of turbo-generator   J M Pugnet and B Vinsonneau  549  C432/033  IMechE  1992  Two new procedures to balance flexible rotors without test runs   D Wiese  557  C432/034  IMechE  1992  Basic study of self-automatic balancer for high-speed spindles   S Shimizu and H-S Lee  569  C432/050  IMechE  1992  Unbalance response of nonlinear asymmetric rotating systems   G Genta, C Delprete, A Tonoli and R Vadori  575  C432/054  IMechE  1992  Squeeze film damping of a rigid rotor supported on three bearings   J E H Sykes and R Holmes  583  C432/030  IMechE  1992  Non-linear vibrations due to roller-bearing clearances   N Bachschmid, A Curami and D Del Vescovo  591  C432/025  IMechE  1992  Dynamic force coefficients of short and long squeeze film dampers executing elliptic orbits   A El-Shafei and R V Eranki  597  C432/127  IMechE  1992  Case history: subsynchronous vibrations of a steam turbine   F Cagliani and A Rebizzo  605  C432/063  IMechE  1996  On modelling elastic disk and shaft systems for numerical Eigenfrequency analysis  M Hohlrieder and H Irretier  1  C500/009/96  IMechE  1996  A method for calculating the natural frequencies of continuous blade structures with three different types of loose coupling means  K Namura, E Saito, and A Okabe  13  C500/051/96  IMechE  1996  Impact response of 2-bladed rotor  J F Bratt  23  C500/132/96  IMechE  1996  Some fundamental aspects on the dynamic properties of journal bearings  K 0 Olsson  31  C500/020/96  IMechE  1996  Dynamic coefficients of long annular pump seals - further experimental results  M Ismail and R D Brown  41  C500/060/96  IMechE  1996  Simplified calculation of dynamic coefficients for hydrodynamics bearings in large hydrogenerators  H I Weber; A G A Fuerst, and G C Brito Jr  53  C500/131/96  IMechE  1996  Journal motion at critical speed  D Morrison  63  C500/046/96  IMechE  1996  Accurate prediction in dynamics of centrifugal impellers  A Gelin,J M Pugnet, and G Jacquet-Richardet  77  C500/090/96  IMechE  1996  Vibration of boiler feed pump and interaction force between impeller blades and guide vanes  Y Kanemitsu and M Eguchi  89  C500/029/96  IMechE  1996  Dynamic modelling of centrifugal fun rotors  J HIrons  99  C500/037/96  IMechE  1996  Vibration of circular saw blades with initial non-symmetric membrane stress distribution  T Andersson  109  C500/063/96  IMechE  1996  Test results and numerical simulation of AMB rotor drop  E E Swanson, K V S Raju, and R G Kirk  119  C500/074/96  IMechE  1996  A theoretical analysis of stability characteristics of high-speed floating bush bearings  M Tanaka  133  C500/087/96  IMechE  1996  Experimental verification of stability characteristics of two- lobe journal bearings with surface wear dent  M Tanaka and K Suzuki  143  C500/088/96  IMechE  1996  Axial vibrations induced by oil film forces  G Diana, F Cheli,A Collina, and S Bruni  151  C500/120/96  IMechE  1996  Risk assessment of low pressure steam turbine blades  T C T Lam and NF Rieger  161  C500/122/96  IMechE  1996  Friction damper optimization for turbine blades: experiment and theoretical predictions  K Y Sanliturk, A B Stanbridge, and D J Ewins  171  C500/019/96  IMechE  1996  The influence of aerodynamic damping and stiffness on the vibrational behaviour of wind turbines  K Kaiser and R Gasch  187  C500/002/96  IMechE  1996  Calculation of dynamic force and coefficient of labyrinth seal with arbitrary configuration  T Iwatsubo, H Mochida, and XJia  197  C500/093/96  IMechE  1996  stability analysis of a variable impedance hydrodynamic bearing  M J Goodwin, L K Lim, M P Roach, and P J Ogrodnik  211  C500/010/96  IMechE  1996  Thermo-hydrodynamic analysis of taper bore grooved liquid ring seals  R G Kirk and S K Baheti  225  C500/075/96  IMechE  1996  Stability thresholds of rotor systems supported on tilting-pad journal bearings  D S H Chan and M F White  235  C500/116/96  IMechE  1996  Rotor vibration controller design for combined unbalance forcing and multi-frequency base motion  P S Keogh, N K Rutland, and C R Burrows  259  C500/058/96  IMechE  1996  Calculation of coupled vibrations  W Schiffer  275  C500/059/96  IMechE  1996  Optimum damping condition of transient vibration for a rotating shaft  K Mizutani, H Wada, and K Kato  287  C500/061/96  IMechE  1996  Torsional dynamics and active control of helicopter drive train  F Malburet, A Otho, P Lacube, and T Krysinski  297  C500/086/96  IMechE  1996  Simulations and experiments of the non-linear hysteresis loop for rotor-bearing instability  Maurice L Adams, Michael L Adams, and J-S Guo  309  C500/001/96  IMechE  1996  Vibration design and field experience with novel vertical high-power two-pole induction motors  M Utecht  321  C500/035/96  IMechE  1996  Stability analysis of rotors operating in magnetic field  S Morii, N Nagai, K Katayama, and A Sueoka  331  C500/047/96  IMechE  1996  Elimination of subsynchronous vibrations on a multi-stage process centrifugal compressor during full load tests under natural gas  A Gelin, J M Pugnet, J-C Pocheron, D Bolusset, A Charbonnier, D Orhon  341  C500/089/96  IMechE  1996  Masking effects in digital envelope analysis of faulty bearing signals  R B Randall and Y Gao  351  C500/097/96  IMechE  1996  Inner race fault detection in rolling element bearings using directional spectra of vibration signals  C-W Lee andJ-P Park  361  C500/110/96  IMechE  1996  2-dimensionalcomputationalmodelfor vibration analysis of waviness in rolling bearing applications  J A Wensing and G C van Nijen  371  C500/136/96  IMechE  1996  Transient response and contact due to sudden imbalance in a flexible rotor-casing system with support asymmetry  M K K Ghauri, C HJ Fox, and EJ Williams  383  C500/016/96  IMechE  1996  Unbalance response analysis of a two-mass rotor system including robbing effects  J L Isaksson  395  C500/021/96  IMechE  1996  Spiral vibrations - modal treatment of a rotor-rob problem based on coupled structural/thermal equations  R Liebich and R Gasch  405  C500/042/96  IMechE  1996  Numerical simulation of jet engine behaviour in case of an assumed blade loss  K Muhlenfeld and R Tadros  415  C500/065/96  IMechE  1996  Quasi joint time frequency analysis in turbomachinery  K A Kaupert  425  C500/004/96  IMechE  1996  Decomposing transient vibration signals from rotating machinery into spatial, temporal, and directional components  I Bucher, DJ Ewins, and D A Robb  433  C500/005/96  IMechE  1996  Simulation models for bearing vibration generation and fault detection via neural networks  X F Wang and P D McFadden  441  C500/015/96  IMechE  1996  Instationary balancing of rigid rotors in the time-domain- theory and experimental results  I Menz and R Gasch  451  C500/014/96  IMechE  1996  Evaluation of unbalance resonance vibration control methods for active magnetic bearing equipped flexible rotor  O Matsushita, Y Hisanaga, and S Saitoh  461  C500/024/96  IMechE  1996  Evaluation of the state of unbalance in flexible rotors-vibration velocity versus modal unbalances  D Wiese  471  C500/036/96  IMechE  1996  Influence coefficient method for rotor balancing using multip1e trial mass sets  E Preciado, R H Bannister, andJ E Aguirre  491  C500/130/96  IMechE  1996  Condition monitoring of rotating machinery using a fuzzy pattern recognition algorithm  J Strackeljan and D Behr  507  C500/049/96  IMechE  1996  Towards risk based criteria for rotor vibration  AJ Smalley, R M Baldwin, D A Mauney, and H R Millwater  517  C500/081/96  IMechE  1996  Signature analysis of waves propagating through very long bars applicable to down-hole pump diagnosis  M P Ribeiro, D J Ewins, and D A Robb  529  C500/034/96  IMechE  1996  Modal testing of rotating structures: difficulties, assumptions, and practical approach  I Bucher, D J Ewins, and D A Robb  539  C500/007/96  IMechE  1996  Modal testing of\U1constrained rotors  A B Stanbridge and D J Ewins  563  C500/025/96  IMechE  1996  Identification of forces and deformation shapes of rotors in operating conditions - numerical test results  G A Zanetta and R Provasi  573  C500/028/96  IMechE  1996  Rotordynamic modelling utilizing dynamic support data obtained from field impact tests  I Redmond  583  C500/055/96  IMechE  1996  Dynamic coupling in simple geared rotor bearing system  TN Shiau,J S Rao, andJ R Chang  599  C500/127/96  IMechE  1996  Dynamic characteristics of two different systems with variable inertia controlled by same equations  V Oravsky andJ S Rao  609  C500/128/96  IMechE  1996  The torsional vibration characteristics of couplings  J Ilich, S J Drew, and B J Stone  619  C500/032/96  IMechE  1996  Torsional modal analysis of rotating shaft systems  T J Miles, S J Rothberg, and M Lucas  631  C500/101/96  IMechE  1996  Solution to stability problems in steam turbines by optimization of a squeeze film damper  J J Nyqvist and R Larsson  641  C500/022/96  IMechE  1996  Restraining sudden unbalance responses by centralized and uncentralized squeeze film dampers  G Meng and EJ Hahn  651  C500/094/96  IMechE  1996  Vibration analysis of a squeeze film dampers - flexible rotor system subjected to an earthquake with a vertical shock  S Okamoto and H Okada  661  C500/107/96  IMechE  1996  Adaptive control for rotor-bearing systems using hybrid squeeze film dampers  J P Hathout and A EI-Shafei  671  C500/119/96  IMechE  1996  Influence of the natural cylinder output unbalance and network configurations on the torsional vibration calculations of diesel electric installations  J Jenzer   691  C500/012/96  IMechE  1996  Simulation of transient torsional vibrations in marine diesel propulsion. plants  H Keller  703  C500/013/96  IMechE  1996  Vibration of engines resulting from torsional vibration of crankshafts  DC Hesterman, SJ Drew, and BJ Stone  713  C500/033/96  IMechE  1996  Torsional vibration of an asymmetrical rotor shaft after passing its critical speed of whirling  S I Nakamura, H Ota, and M Kato  725  C500/078/96  IMechE  1996  A resonance energy factor for the rotordynamic evaluation of high-speed gear compressors  J Althaus  735  C500/111/96  IMechE  1996  Hydrodynamically coupled mass on a turbine runner  H Schmid and R H Scanlan  747  C500/126/96  IMechE  1996  Stress in rotating and laterally vibrating machinery rotors  A Muszynska  769  C500/069/96  IMechE  1996  Measurements on a rotor contacting its housing  M Fumagalli and G Schweitzer  779  C500/085/96  IMechE  2004  Calibration of labyrinth seal bulk flow design analysis predictions to CFD simulation results  R G Kirk and Z Guo  3  C623/057/2004  IMechE  2004  Rotordynamics of turbine labyrinth seals – a comparison of CFD models to experiments  J Schettel and R Nordmann  13  C623/018/2004  IMechE  2004  Assessing seal clearance loss caused by static deflection and unbalance response of a large compressor rotor  A J Smalley, J R Hollingsworth, M Camatti, and W Hardeveld  23  C623/049/2004  IMechE  2004  Self-excited vibration of elastic rotors in tilting-pad journal bearings  H Taura and M Tanaka  35  C623/050/2004  IMechE  2004  Stabilization of a rigid rotor by a time-varying stiffness of the bearing mounts  H Ecker and A Tondl  45  C623/014/2004  IMechE  2004  Squeeze film damper with rigorous account of cavitation  K-O Olsson  55  C623/015/2004  IMechE  2004  Dynamic analysis of a rotor system supported by non-ideal plain journal bearings  P E Hannukainen, J T Sopanen, and A Mikkola  69  C623/010/2004  IMechE  2004  The stability of centrifugal compressors by applications of tilt-pad seals  E A Memmott  81  C623/021/2004  IMechE  2004  Rotordynamic modelling of a multi-stage water-injection pump for enhanced oil recovery  S H Al-Farsi, B Samanta, and K R Al-Balushi  91  C623/038/2004  IMechE  2004  Analysis of non-linear effects in oil-film journal bearings  A Vania and E Tanzi  101  C623/041/2004  IMechE  2004  A tracking solver using sliding mode control to obtain eigensolutions of rotor-bearing systems  O Matsushita, H Fujiwara, and M Ito  111  C623/019/2004  IMechE  2004  Investigation into the performance of an aero-engine rotor assembly incorporating a non-circular squeeze film damper  D F Kik, C L Lim, and M C Levesley  121  C623/068/2004  IMechE  2004  Analysis of a flexible rotor system including non-linear squeeze film damping using a finite element method  C L Lim, D F Kik, and M C Levesley  131  C623/070/2004  IMechE  2004  Prediction of dynamic response of machine tool by sub-structure analysis  M R Movahhedy and J M Gerami  141  C623/079/2004  IMechE  2004  Numerical approach to investigation of stability and vibration of rotors supported by long segment bearings lubricated with oil containing air bubbles  J Zapom?l  153  C623/024/2004  IMechE  2004  Analysis of essentially non-linear vibration of large-scale models for bladed discs with variable contact and friction at root joints  E P Petrov and D J Ewins  163  C623/028/2004  IMechE  2004  Computational modelling of frequency-dependent additional effects during fluid-film interaction with structures  E Malenovský and F Pochylý  173  C623/008/2004  IMechE  2004  Optimization methods applied to parameters estimation of flexible coupling in rotating systems  A Tapia Tadeo, H Fiori de Castro, and K Lucchesi Cavalca  183  C623/090/2004  IMechE  2004  The stiffening effect of laminated rotor cores on flexible-rotor electrical machines  S D Garvey, J E T Penny, M I Friswell, and A W Lees  193  C623/075/2004  IMechE  2004  Validating synchronous blade vibration amplitudes from blade tip-timing data analysis  J Gallego Garrido and G Dimitriadis  205  C623/023/2004  IMechE  2004  Automatic post-processing of laser vibrometry data for rotor vibration measurements  B Halkon and S Rothberg  215  C623/085/2004  IMechE  2004  Laser doppler vibrometry measurements of a rotating milling machine spindle  M Rantatalo, K Tatar, and P Norman  231  C623/110/2004  IMechE  2004  Controlling method of sideband noise of meshing frequency for spiral bevel gears  T Hirogaki, E Aoyama, T Katayama, Y Nakata, Y Nakano, and Y Uenishi  241  C623/016/2004  IMechE  2004  Model-based analysis of torsional and transverse vibrations of geared rotating machines  P Pennacchi and A Vania  251  C623/040/2004  IMechE  2004  Real-time travelling waves and whirl decomposition  I Bucher, M Feldman, A Minikes, and R Gabay  261  C623/078/2004  IMechE  2004  A simple but versatile rotor model  J E T Penny, M I Friswell, A W Lees, and S D Garvey  269  C623/033/2004  IMechE  2004  Defeating Nyquist  R F McLean, S H Alsop, and J S Fleming  281  C623/039/2004  IMechE  2004  Application of Goertzel Algorithm for unbalance signal processing  D Neumeuer and R Nordmann  291  C623/007/2004  IMechE  2004  Rolling element bearing fault detection using improved envelope analysis  L Shi, R B Randall, and J Antoni  301  C623/020/2004  IMechE  2004  Automated novelty detection using a modified Kohonen self organizing map  L B Jack, A K Nandi, and M L D Wong  313  C623/027/2004  IMechE  2004  Damaged roller bearing vibrations – study of the cyclic statistical features  N Bouguerriou, C Capdessus, E Sekko, and L Allam  323  C623/059/2004  IMechE  2004  The effects of localized gear tooth damage on the gear dynamics – a comparison of the effect of a gear tooth root crack and a spall on the gear transmission error  H Endo, R B Randall, and C Gosselin  333  C623/101/2004  IMechE  2004  A novel condensation scheme for identification of crack model parameters in a beam based on force-response measurements  R Tiwari, N Dharmaraju, and S Talukdar  343  C623/104/2004  IMechE  2004  An application of artificial neural networks and fuzzy logic to vibration monitoring of large rotating machinery in power plants  L Gregori and G A Zanetta  353  C623/046/2004  IMechE  2004  Automatic feature extraction for bearing fault detection using genetic programming  H Guo, L B Jack, and A K Nandi  363  C623/026/2004  IMechE  2004  Identification of rotor dynamic machinery – a laboratory trial  A W Lees, E D Price, and M I Friswell  373  C623/030/2004  IMechE  2004  Unbalance identification in a large steam turbogenerator using model-based identification and modal foundation  N Bachschmid, P Pennacchi, A Vania, L Gregori, and G A Zanetta  383  C623/081/2004  IMechE  2004  Experimental estimation of bearing dynamic parameters from rundown data  R Tiwari, A W Lees, and M I Friswell  393  C623/105/2004  IMechE  2004  Identification of the configuration state of turbomachinery using rotor deformation measurements  W Hu, N S Feng, and E J Hahn  403  C624/072/2004  IMechE  2004  Evaluation of rigid and flexible coupling models in an experimental rotor-coupling-bearing system using frequency response functions  A Tapia Tadeo and K Lucchesi Cavalca  413  C623/093/2004  IMechE  2004  Vibration measurements for validation of electromechanical rotor model for cage induction motor  T P Holopainen, S A Aatola, and A Arkkio  423  C623/034/2004  IMechE  2004  Updating method based on genetic algorithm applied to non-linear journal bearing model  H Fiori de Castro, S Junichi Idehara, K Lucchesi Cavalca, and M Dias Junior  433  C623/091/2004  IMechE  2004  Vibration of an automotive turbocharger – a case study  R Holmes, M J Brennan, and B Gottrand  445  C623/011/2004  IMechE  2004  Rotordynamic analysis of an electric submersible pump  S Al-Gheithi, B Samanta, K R Al-Balushi, S A Al-Araimi, and R A Siddiqui  457  C623/037/2004  IMechE  2004  Dynamics of high-speed cryo pump rotors  J S Rao, R Sreenivas, and P P George  467  C623/103/2004  IMechE  2004  Diagnosis of gearbox faults in the field  A El-Shafei  479  C623/088/2004  IMechE  2004  Fault classification using genetic programming  L Zhang, L B Jack, and A K Nandi  491  C623/022/2004  IMechE  2004  Detection and modelling of rotor eccentricity in electrical machines – an overview  L Frosini and P Pennacchi  501  C623/060/2004  IMechE  2004  Analysis of rolling element bearing faults in rotating machinery – experiments, modelling, fault detection, and diagnosis  M L Adams and K A Loparo  511  C623/009/2004  IMechE  2004  Inverse determination of imbalance distributions  D Peters, R Nordmann, B Domes, and P Maass  521  C623/062/2004  IMechE  2004  Active diagnostics of rotating structures  I Bucher, O Shomer, and H Raz  531  C623/077/2004  IMechE  2004  Evaluation of damping ratio estimation techniques for rotordynamic stability measurements  C H Cloud, E H Maslen, and L E Barrett  541  C623/048/2004  IMechE  2004  Torsional behaviour of cracked rotors  N Bachschmid, P Pennacchi, and E Tanzi  553  C623/067/2004  IMechE  2004  A scenario test for detection of breathing crack in rotors  C-W Lee and S-W Kang  563  C623/025/2004  IMechE  2004  Model analysis of rotor system using modulated co-ordinates for asymmetric rotor system with anisotropic stator  C-W Lee, J-H Suh, and S-W Hong  575  C623/051/2004  IMechE  2004  Integrating experimental tests and rotordynamics analysis for solving vibration problems on geothermal turbogenerator sets  L Gregori, G A Zanetta, D Lucci, and C Lupetti  585  C623/047/2004  IMechE  2004  Experiments and modelling of a three-bearing flexible rotor for unbalance response and instability thresholds  M L Adams and A H Falah  595  C623/002/2004  IMechE  2004  Application of a new modelling technique to a highly non-linear flexible rotor system  A P H Weightman, M C Levesley, and W J Manning  605  C623/069/2004  IMechE  2004  Statistical analysis and optimization of design parameters in components of rotating machinery  Z de Castro Silveira and K Lucchesi Cavalca  615  C623/092/2004  IMechE  2004  Simultaneous optimum design of rotor and magnetic bearings  T Iwatsubo, N Nakanishi, and A Nakashima  627  C623/063/2004  IMechE  2004  Non-linear parameter identification of a rotor with partial rub  Y-S Choi  641  C623/029/2004  IMechE  2004  Parametric characterization of rub induced whirl instability using an instrumented rotordynamics test rig  R J Williams  651  C623/012/2004  IMechE  2004  Smooth treatment and non-linear characteristics of non-linear rotor system with step impact-rub force  G Meng and F S Lin  661  C623/112/2004  IMechE  2004  Rotor-to-stator rub causing spiral vibrations – modelling and validation of experimental data on a real rotating machine  N Bachschmid, P Pennacchi, and A Vania  671  C623/080/2004  IMechE  2004  Low-frequency vibrations in disk braking systems – controlling the creep-groan phenomenon in road vehicles  M F Harrison  681  C623/001/2004  IMechE  2004  New system identification scheme of AMB rotor system considering sensor and actuator dynamics  H-J Ahn, D-C Han, C-J Kim, and E H Maslen  693  C623/036/2004  IMechE  2004  Active parametric vibration control of a smart beam  H Springer and S Kovyrshin  703  C623/017/2004  IMechE  2004  Vibration control with lateral force produced in electrical machines  W K S Khoo, S D Garvey, K Kalita, and P R Houlston      IMechE  2008  Coupling between rotor planes due to deformations of components having a helical direction  S D Garvey, University of Nottingham, UK; J E T Penny, Aston University, UK; M I Friswell, University of Bristol, UK; A W Lees, Swansea University, UK  C663/086/08    IMechE  2008  Application of multi-stage cyclic symmetry to rotor dynamics   N Kill, SAMTECHS.A., Belgium  C663/015/08    IMechE  2008  Strong and weak whirling modes in rotating machinery   C-W Lee, Y-H Seo, Korea Advance Institute of Science and Technology, Korea  C663/041/08    IMechE  2008  Influence of imperfections on vibrations in rotating machinery   A Lazarus, D Combescure, CEA Saclay, France  C663/053/08    IMechE  2008  Non-contacting electromagnetic actuators for chatter stability analysis of milling tools  A R Yusof J,N D Sims, R E Clark, University of Sheffield, UK  C663/082/08    IMechE  2008  Use of Tracking-Continuous Scanning LDV (T-CSLDV) methods for vibration study of bladed disk assembly under operating conditions   D Di Maio, D J Ewins, Imperial College London, UK  C663/083/08    IMechE  2008  Identification of a rotating machine support structure through MIMO technique  E Paiva Okabe, K Lucchesi Cavalca, University of Campinas, Brazil  C663/068/08    IMechE  2008  Model-based analysis of oil-whip instability phenomena occurred in the generator of a power unit  A Vania, Politecnico di Milano, Italy  C663/011/08    IMechE  2008  Analysis of fluid-induced instability using dynamic stiffness and nonlinear journal bearing model  H Fiori de Castro, K Lucchesi Cavalca, University of Campinas, Brazil  C663/031/08    IMechE  2008  Suppression of self-excited vibrations in drivetrains   HEcker, H Springer, Vienna University of Technology, Austria  C663/051/08    IMechE  2008  Unstable shaft vibrations arising from thermal effects due to oil shearing between stationary and rotating elements  P G Morton, Consultant, UK   C663/10l/08    IMechE  2008  A simplified model for lateral rotor dynamic analysis of soft mounted asynchronous machines including electromagnetic excitations  U Werner, Siemens AG, Germany  C663/003/08    IMechE  2008  Dynamic behaviour of rotating electrical machines' stators   G Carvalho Brito Jr., Itaipu Binacional and Uniceste - Western Parana State University, Brazil  C663/005/08    IMechE  2008  Electromechanical interaction in rotordynamics of electrical machines - an overview  T P Holopainen, ABB Electrical Machines, Finland; A Arkkio, Helsinki University of Technology, Finland  C663/037/08    IMechE  2008  Identification of homogenized equivalent materials for the modal analysis of composite structures in electrical machines  Mvan der Giet, K Hameyer, RWTHAachen University, Germany  C663/084/08    IMechE  2008  Origin of unbalanced-magnetic-pull components in electrical machines  A Arkkio, Helsinki University of Technology, Finland; T Holopainen, ABB Electrical Machines, Finland  C663/038/08    IMechE  2008  Modelling and active damping of a motor spindle with speed-dependent dynamics  S Kern, A Schiffler, R Nordmann, E Abele, Technische Universitat Darmstadt, Germany  C663/092/08    IMechE  2008  Self-bearing cage induction machine actuator in active control of rotor vibrations  A Laiho, K Tammi, VTT Technical Research Centre, Finland; J Orivuori, K Zenger, A Sinervo, A Arkkio, Helsinki University of Technology, Finland  C663/039/08    IMechE  2008  Centrifugal pumps uncoupled shafts laser alignment and its influence on vibration level  D Litvinov, Riga Technical University, Latvia  C663/022/08    IMechE  2008  Model and experiment for vibration reduction of a single cylinder reciprocating compressor  N Levecque, J Mahfoud, G Ferraris, R Dufour, INSA Lyon, France; D Violette, Danfoss Commercial Compressors, France  C663/026/08    IMechE  2008  Experimental rotordynamic investigations of a flexible low-pressure-spool  D Peters, Gleason Germany (Holdings) GmbH, Germany; C Kaletsch, R Koehler, R Nordmann, Technische Universitat Darmstadt, Germany; B Domes, Rolls-Royce Deutschland Ltd. & Co. KG, Germany  C663/035/08    IMechE  2008  Dynamic effects in rotors of large horizontal-axis wind-turbines with free-moving masses in blades  S D Garvey, University of Nottingham, UK; JET Penny, Aston University, UK  C663/087/08    IMechE  2008  Improved simulation of faults in rolling element bearings in gearboxes  N Sawalhi, R B Randall, University of New South Wales, Australia  C663/036/08    IMechE  2008  Diagnostics of a spiral bevel gearbox using signals of the motor inverter  R Ricci, P Pennacchi, Politecnico di Milano, Italy  C663/058/08    IMechE  2008  Bi-spectrum of a composite coherent cross-spectrum for faults detection in rotating machines  J K Sinha, University of Manchester, UK  C663/076/08    IMechE  2008  Detection of rolling element bearing faults by analysis of the motor current  A Ibrahim, F Guillet, M El Badaoui, IUT de Roanne, France; R B Randall, University of New South Wales, Australia; D Remand, INSA Lyon, France  C663/080/08    IMechE  2008  Bearing condition monitoring using multiple sensors and integrated data fusion techniques  S L Chen, M Craig, R J K Wood, L Wang, University of Southampton, UK; R Callan, H E G Powrie, GE Aviation, UK  C663/08l/08    IMechE  2008  Stochastic approach for crack identification in rotating shafts using Monte Carlo simulations and a hybrid mechanical model  T Szolc, P Tauzowski, R Stocki, J Knabel, Polish Academy of Sciences, Poland  C663/018/08    IMechE  2008  A shaft crack identification technique based on vibration measurements  M Karthikeyan, R Tiwari, S Talukdar, Indian Institute of Technology Guwahati, India  C663/023/08    IMechE  2008  Turbo-generator groups affected by transverse cracks: a sensitivity analysis of vibrations versus crack position and depth  N Bachschmid, E Tanzi, P Pennacchi, Politecnico di Milano, Italy  C663/028/08    IMechE  2008  Detecting cracked rotors using an active magnetic actuator   M I Friswell, Bristol University, UK; Y Y He, Tsinghua University, PR China; JET Penny, Aston University, UK; J T Sawicki, Cleveland State University, USA  C663/054/08    IMechE  2008  Flexibility coefficients of a shaft with an elliptical front crack   L Rubio, B Munoz-Abella, University Carlos III of Madrid, Spain  C663/056/08    IMechE  2008  Transient modal analysis of the nonlinear dynamics of a turbocharger  P Bonello, University of Manchester, UK  C663/006/08    IMechE  2008  Experimental study of high speed turbocharger dynamic stability  R G Kirk, Virginia Polytechnic Institute and State University, USA; J C Nicholas, Rotating Machinery Technology, Inc., USA  C663/008/08    IMechE  2008  An investigation of gyroscopic effects on the dynamic behaviour of a turbocharger  P Kamesh, M J Brennan, R Holmes, University of Southampton, UK  C663/072/08    IMechE  2008  Bearing condition monitoring using feature generated by genetic programming based on Fisher criterion  H Guo, Q Zhang, A K Nandi, University of Liverpool, UK  C663/102/08