ISCORMA Papers Conference Year Paper Title Paper Author Page Number Other ISCORMA  2001  Design Optimization of High Speed Laboratory Centrifuges Using an Evolutionary Strategy  J. Strackeljan, X. Feng, D. Behr    1003  ISCORMA  2001  Detection of a Rotor Crack by a Periodic Excitation  Y. Ishida, T. Inoue, K. Nishimura    1004  ISCORMA  2001  Detection of Feedback Related Faults in Magnetic Bearing/Rotor Systems Using Synchronous Control Techniques  M. N. Sahinkaya, M. O. T. Cole, P. S. Keogh, C. R. Burrows    1005  ISCORMA  2001  Sensitive and Noise-Immune Vibration Discriminants for Instability Phenomena Detection Caused by Incipient Machinery Deterioration  A. Sokolova, F. Balitsky    1006  ISCORMA  2001  A Hybrid Radial Bearing With Improved Rotordynamic Stability  L. San Andrés    2006  ISCORMA  2001  Dynamic Response of a Rotor Supported on a Floating Ring Bearing  J. Naranjo, C. Holt, L. San Andrés    2005  ISCORMA  2001  Dynamic Analysis of High Speed Spindle System With Diametrical and Thrust Magnetic Bearings  T. N. Shiau, C. M. Chang, K. S. Hsu    2003  ISCORMA  2001  Some Types, Classification and Definitions of Instability in Rotating Machinery  V. Oravský    2009  ISCORMA  2001  The Effect of Bearing Clearances on Its Dynamic Stiffness  Z. Racic    3009  ISCORMA  2001  Design Optimization of Fixed Pad Journal Bearing for Rotor System Using a Genetic Algorithm Approach  H. Saruhan, K. E. Rouch, C. A. Roso    3001  ISCORMA  2001  Investigation of New Design of 3-Lobe Journal Bearing  R. Karpiuk, W. Radulski, O. Olszewski, P. Ostrowski, A. Malec    3013  ISCORMA  2001  Active Controlled Fluid Film Based on Wave Bearing Technology  F. Dimofte, R. C. Hendricks    3014  ISCORMA  2001  Analysis of the Dynamic Characteristics of Lab-Centrifuges and Its Application  Y. Yang, Z. Wang    4003  ISCORMA  2001  Effect of Lubrication System on Dynamic Analysis of Scroll Compressors  W.-S. Lee, J.-J. Chieh, W.-L. Chen, S.-L. Chen    4010  ISCORMA  2001  A Composite Air Spindle-Rotor System  D. G. Lee, S. H. Chang     4013  ISCORMA  2001  Rotordynamics and DDM Design Sensitivity Analysis of an APU Gas Turbine Having a Spline Shaft Connection  A. S. Lee, J. W. Ha    4001  ISCORMA  2001  Fact and Fallacy in Linear Rotordynamics Analysis  A. Caldwell    5001  ISCORMA  2001  Life Begins at 70  K. Liu    5009  ISCORMA  2001  On Transient Excitation of a Damped Two-Bladed Rotor  J. F. Bratt    5007  ISCORMA  2001  Vibration Characteristics of Rotors With Massive Overhangs  B. Ryjik     5006  ISCORMA  2001  Online Lubrication Performance Monitoring of Fluid Film Bearing by Shaft Vibration Measurement  T. Toyota, T. Niho, T. Chiba    3011  ISCORMA  2001  Numerical Analysis of the Journal Motion in the Hydrodynamic Bearing of the Internal Combustion Engine  V. M. Fridman, C. F. Musolff, I. L. Piraner    3012  ISCORMA  2001  Computational Modelling of Dynamic Behaviour and Stability of Journal Bearings Using the Bézier Body  E. Malenovský, F. Pochylý    3002  ISCORMA  2001  Externally Pressurized Bearings Allow Rotor Dynamic Optimization  D. E. Bently, T. Eldridge, J. Jensen    3018  ISCORMA  2001  Why We Need to Install Exciters in Rotating Machines? -- Benefits and Prospects  C.-W. Lee    1007  ISCORMA  2001  Diagnostic Approaches for Gears and Bearings  C. Breneur, J. Mahfoudh, K. Stofleth, D. Play    1008  ISCORMA  2001  Vibroacoustical Diagnostics of the Movable Reflector-Modulator of the IBR-2 Pulsed Research Reactor  S. V. Evropin, V. D. Sizarev, L. V. Yakushina, V. D. Ananiev, L. V. Edunov    1009  ISCORMA  2001  Expert System Source Identification of Excessive Vibration  R. G. Kirk, Z. Guo    1010  ISCORMA  2001  Cracked Beam Section Model Applied to Turbine Rotors  C. Vare, S. Andrieux    4002  ISCORMA  2001  Dynamic Analysis of Rotor Systems With Angular Contact Ball Bearings Subject to Axial and Radial Loads  S.-W. Hong, Y. C. Shin    4009  ISCORMA  2001  Dynamics of Rotating Flexible Blade-Disc-Shaft Assemblies -- Application to a Turbomolecular Pump Rotor  G. Jacquet-Richardet, E. Chatelet, C. Gaboyer, O. Dauvillier    4014  ISCORMA  2001  Dynamic Behavior of High-Speed Rotor Supported by Fluid Film Journal Bearings  Y. M. Temis, M. Y. Temis    4012  ISCORMA  2001  Analysis of Externally Pressurized Fluid-Film Bearings for High-Speed Rotating Machinery  Z. Guo, R. G. Kirk    3006  ISCORMA  2001  Experimental Study of the Rotor Rig With a Bubble Inserted Into the Bearing Clearance  D. E. Bently, A. Petchenev, O. Malakhova    3015  ISCORMA  2001  Stability Insights From Hybrid-Bearing Research at the Texas A&M University Turbomachinery Laboratory  D. W. Childs    3016  ISCORMA  2001  Hydrostatic Pivoted Pad Bearing for Oil-Free Turbomachinery  L. M. Greenhill, V. J. Lease    3005  ISCORMA  2001  Numerically Calculated Rotor Dynamic Coefficients of a Pump Rotor Side Space  T. Staubli, M. Bissig    4007  ISCORMA  2001  An Analysis of Rotor System Dynamics Using Properties of Separate Rotors, Obtained by FEM Softwares  B. Ryjik    4011  ISCORMA  2001  Identification of External Disturbances in Rotating Machinery With Magnetic Bearings  Z. Gosiewski    4004  ISCORMA  2001  Decoupling Control of Fault-Tolerant Magnetic Bearings  U. J. Na, A. B. Palazzolo, A. F. Kascak    4008  ISCORMA  2001  Determination of Contact Forces During Rubbing Considering Blade Dynamics  J. Ahrens, H. Ulbrich    5004  ISCORMA  2001  Thermo-Mechanical Behavior of Rotor With Rubbing  J. T. Sawicki, A. Montilla-Bravo, Z. Gosiewski    5008  ISCORMA  2001  Consideration of Whirl Frequency Ratio and Effective Damping Coefficient of Seal  T. Iwatsubo, H. Ishimaru    2014  ISCORMA  2001  The Effect of Swirl Braked Grooved Seals on the Stability and the Unbalance Response of a Flexible Rotor  H. Ishimaru, T. Iwatsubo    2004  ISCORMA  2001  Effects of Seal Geometry on Rotordynamic Fluid Forces  G. Morimoto, H. Nishida, Y. Yoshida, Y. Tsujimoto, S. Morii, Y. Kawashima    2012  ISCORMA  2001  Design Verification and Troubleshooting by Vibration Exciting Test in Actual Operating Condition  H. Kanki    2013  ISCORMA  2001  Condition Monitoring and Diagnosis of Rotating Machinery by Gram-Charlier Expansion of Vibration Signal  T. Toyota, T. Niho, P. Chen    1013  ISCORMA  2001  Vibration and Stability of 3000 HP Titanium Construction Chemical Process Blower  L. Gutzwiller, M. A. Corbo    1014  ISCORMA  2001  Application of In-Operation Modal Analysis in Diagnostics of Machinery  T. Uhl, T. Barszcz, W. Lisowski    1016  ISCORMA  2001  Rotordynamic Influence on Rolling Element Bearing Selection and Operation  G. K. Queitzsch, Jr., D. P. Fleming    1017  ISCORMA  2001  Air-Hammer Instability of Externally Pressurized Compressible-Fluid Bearings  J. S. Jacob, J. J. Yu, D. E. Bently, P. Goldman    2015  ISCORMA  2001  Effect of Interference Fits on Threshold Speeds of Rotordynamic Instability  J. M. Vance, D. Ying    2007  ISCORMA  2001  Surge Characteristics of Centrifugal Compressors With IGV's  C. Rodgers    2002  ISCORMA  2001  Stability Analysis of Isotropic Rotor-Bearing Systems With Internal Damping Using Finite Elements  L. Forrai    2010  ISCORMA  2001  An Effect of Pad Support Position on the Dynamic Characteristics of Tilting 4-Pad Journal Bearing  S. Strzelecki    3008  ISCORMA  2001  Analysis of Short Magnetohydrodynamic Journal Bearings  J. Wauer, B. Schweizer    3004  ISCORMA  2001  Development of a Test Rig for the Measurement of Squeeze-Film Damper Force Coefficients  J. I. Inayat-Hussain, H. Kanki, Y. Senno    3010  ISCORMA  2001  Short Journal Bearings With Misaligned Axes  J. Gomez-Mancilla, V. R. Nosov    3017  ISCORMA  2001  Experimental Study of an Overhung Rotor System With Gyroscopic Effects, and the System's Response to Partial Rub  K. Dayton, P. Goldman, W. Franklin, D. E. Bently    5011  ISCORMA  2001  Presentation: Determining Dynamic Stiffness of a Pressurized Bearing Using 3D CFD Code With Experimental Verification  Robert Blumenthal and Wes Franklin    0  ISCORMA  2003  Numerical Modelling and Simulation in Rotordynamics  G. Genta      ISCORMA  2003  Reviewing Turbomachine Sealing and Secondary Flows  R. C. Hendricks, B. M. Steinetz, M. J. Braun, L. T. Tam, A. Muszynska, E. V. Zaretsky, M. M. Athavale, A. J. Przekwas      ISCORMA  2003  Unconventional Bearings in Turbomachinery - Modeling and Selected Applications  Z. Kozanecki      ISCORMA  2003  The Influence of Damping on the Efficiency of Autobalancing Devices for Rigid Rotors  B. Ryzhik, L. Sperling, and H. Duckstein       ISCORMA  2003  The Application of High Speed and Optimal Control in Electromagnetic Bearing  System Based on DSP, S. Liu, Z. Bian, and C. Yin       ISCORMA  2003  Influence of Control Loop on Torsional Vibrations of Rotating Machinery  Z. Domachowski, W. Próchnicki, Z. Puhaczewski, and M. Dzida       ISCORMA  2003  Dynamic Characteristics of Tilting 12-Pad Journal Bearing  O. Olszewski, S. Strzelecki, and T. Someya       ISCORMA  2003  Effect of Bore Profile on the Static and Dynamic Characteristics of 6-Lobe Journal Bearing  S. Strzelecki       ISCORMA  2003  Influence of Elastohydrodynamic Contact Deformations in Fluid Film Bearing on High-Speed Rotor Dynamic  Y. M. Temis and M.Y. Temis       ISCORMA  2003  Sub-Synchronous Whirl in the LE-7A Rocket Engine Fuel Turbo-Pump  Motoi, A. Kitamura, N. Sakazume, M. Uchiumi, M. Uchida, K. Saiki, O. Nozaki, T. Iwatsubo       ISCORMA  2003  Detection Technique for Faults Perturbing Rotor Stability, Illustrated by Means of an Example of the Movable Reflector-Modulator of the Pulsed Research Reactor  A. G. Sokolova, F. J. Balitsky, and V. D. Sizarev       ISCORMA  2003  Dynamic Analysis of a Dual Rotor-Bearing System in Support of the TF-41 Seeded-Fault Testing  J. T. Sawicki, J. P. Gyekenyesi, G. Y. Baaklini, and A. L. Gyekenyesi       ISCORMA  2003  Rotational Test of a Flexible Rotor Supported by Active Magnetic Bearings  H. Fujiwara, M. Ito, O. Matsushita, and Y. Kanemitsu       ISCORMA  2003  New Concept of the Spin Test System With Active Magnetic Bearings  D. Kozanecka, Z. Kozanecki, T. Lech, and P. Swider       ISCORMA  2003  Steady-State Analysis of the Long Plain Journal Bearing in the Nanotechnology Environment  C. H. T. Pan, D. Kim, and M. D. Bryant       ISCORMA  2003  Dynamic Analysis of the Long Plain Journal Bearing in the Nanotechnology  Environment, C. H. T. Pan, D. Kim, and M. D. Bryant       ISCORMA  2003  Dynamic Behavior of Cracked Flexible Rotor Subjected to Constant Driving Torque  J. T. Sawicki, D. E. Bently, X. Wu, G. Y. Baaklini, and M. I. Friswell       ISCORMA  2003  Detection of Steady Crack Growth on Rotating Shafts  J. Gómez-Mancilla, V. R. Nosov, and R. García-Illescas       ISCORMA  2003  Control of Overhung Rotor Supported by Active Magnetic Bearings  M. Ito, H. Fujiwara, O. Matsushita, and N. Takahashi       ISCORMA  2003  The Spindle Speed Optimal Control in Modern Milling Operations  K. J. Kalinski and M. Galewski       ISCORMA  2003  On Vibration Control of Transiently Excited Structurally Damped 3-Bladed Rotor  J. F. Bratt       ISCORMA  2003  Destabilizing Force of Labyrinth Seal Under Partial Admission Condition  H. Kanki, S. Shibabe, and N. Goshima       ISCORMA  2003  Influence of Structural Parameters and Flow Conditions on the Dynamic Behaviour of Flexible Labyrinth Seals  G. Schuck and R. Nordmann       ISCORMA  2003  Introduction to Computational Modelling of Taylor Vortices for Fluid-Film Interaction Structures  E. Malenovský and F. Pochylý       ISCORMA  2003  Coupled Forms of Vibrations in Rotating Machinery  J. Kicinski       ISCORMA  2003  Coupled Vibration Analysis of an Industrial Gas Turbine Engine & Drivetrain - Analysis and Testing  A. Surial and A. Kaushal       ISCORMA  2003  New Theory of Rotor Dynamics: Dynamics of Umbrella-Type Rotor With Flexible Support  A. Y. Zhivotov, Y. G. Zhivotov, and Y. V. Brazaluk       ISCORMA  2003  Experimental Verification of Piecewise Nonlinear Jeffcott Rotor Model With Preloaded Snubber Ring  E. V. Karpenko, M. Wiercigroch, and R. D. Neilson       ISCORMA  2003  Dynamic of the Non-Holonomic Rotating Machinery With Variable Speed Drives  M. Zlokolica, W. Wisutmethangoon, P. Ngamsritragul, B. Sovilj, and M. Vladimir       ISCORMA  2003  Stability of a Rotor Supported by Wave Journal Bearings as a Function of Oil Temperature  M. I. Lambrulescu, F. Dimofte, and J. T. Sawicki       ISCORMA  2003  Thermal Effects on Dynamic Characteristics of Tilting 5-Pad Journal Bearing  S. Strzelecki and Z. Towarek       ISCORMA  2003  Natural Frequencies and Mode Shapes of Rotating Three Shrouded Bladed Discs Placed on the Part of the Shaft  R. Rzadkowski, L. Kwapisz, J. Sokolowski, R. Karpiuk, P. Ostrowski, and W. Radulski       ISCORMA  2003  On the Role of Damping on the Dynamics of Rotating Blades  G. Genta       ISCORMA  2003  Improvement of Rotor Performance Under Rubbing Conditions Through Active Auxiliary Bearings  J. Jiang and H. Ulbrich       ISCORMA  2003  Impacting of a Rotor Against Retainer Bearing  A. Muszynska       ISCORMA  2003  Impact Velocity Modeling of Gear Vibration to Estimate Defect Width  A. Parey and N. Tandon       ISCORMA  2003  Modeling the Oil Flow Beneath the Flexible Sleeve of an Active Oil Bearing  X. Yu, G. Davies, and J. Krodkiewski       ISCORMA  2003  Influence of Oil Flow Under the Flexible Sleeve of the Active Bearing on the Stability of the Rotor Bearing System  X. Yu, G. Davies, and J. Krodkiewski       ISCORMA  2003  Synchronous Analysis for Diagnostics of Rolling Bearings in the Turbo Jet Engine  Z. Gosiewski and A. Romaniuk       ISCORMA  2003  Diagnosing of Unbalancing Gas Turbine Rotors  A. Charchalis and A. Grzadziela       ISCORMA  2003  Robust Active Vibration Control of Flexible Rotors Using Piezo Actuators as Active Bearing  A. Alizadeh, C. Ehmann, U. Schönhoff, and R. Nordmann       ISCORMA  2003  Stability Control of an AMB-Driveline System With Internal Damping and Non-Constant Velocity Couplings  H. A. DeSmidt, K. W. Wang, E. C. Smith, andA. J. Provenza       ISCORMA  2003  Dynamic Characteristics of Rotor-Bearing System With the Rotor Reinforced by Light Coating of Composite Material  S. M. Ghoneam and S. Strzelecki       ISCORMA  2003  On the Use of the "Bagplot" Representation for a Sensitivity Analysis on the Effects of Bearing Dynamic Stiffness Variations on the Vibrations of a Steam Turbine  P. Pennacchi and A. Vania      ISCORMA  2003  ADRE® Application in Measuring Hot-Cold-Hot Machinery Component Movement  I. Dabelic       ISCORMA  2003  Analytical-Numerical Approach for Non-Linear Dynamic Modeling of the Bearing-Rotor-Shaft Systems to Design and Fault Diagnostics  T. Szolc, J. Kicinski, and R. Rzadkowski       ISCORMA  2003  Feedforward and Feedback Control During N-Waved Machining by Magnetic Bearing Spindles  Z. Gosiewski and J. T. Sawicki       ISCORMA  2003  FPGA Based Transconductance Amplifier for AMB Application  M. Chiaberge, C. Damilano, F. Maddaleno, and G. Genta       ISCORMA  2003  Actuator/Sensor Integration in Magnetic Bearings  Z. Gosiewski and M. Szaro       ISCORMA  2003  Non-Axisymmetrical 3D Element for FEM Rotordynamics  M. Silvagni, G. Genta, and A. Tonoli       ISCORMA  2003  Vibration Measurements and FE Modeling Tools in Root Cause Analysis (I)  Z. Racic       ISCORMA  2003  Runout Measurements With Non-Contact Probes, and FE Modeling, Tools in RootCause Analysis (II)  Z. Racic       ISCORMA  2003  Vibration Problems of High Power Air Blower Machine  V. Barzdaitis, M. Bogdevicius, and S. Gecys       ISCORMA  2003  Full Load String Test Experience on the Instability of a High Speed Back to Back Compressor Equipped With a Honeycomb Seal  M. Camatti, G. Vannini, L. Baldassarre, J. Fulton, and P. Forte       ISCORMA  2003  Instability Induced by Iron Losses in Rotor-Active Magnetic Bearing System  N. Takahashi, M. Hiroshima, H. Miura, and Y. Fukushima       ISCORMA  2003  Stability of Gas-Lubricated Externally Pressurized Two-Layered Porous Journal  Bearings, N. Saha and B. C. Majumdar       ISCORMA  2003  Stability Performance Comparison of Rotor-Bearing Systems Supported on Conventional and Hybrid Journal Bearings  J. Gómez-Mancilla, V. Nosov, A. Ordoñez-Pantoja, and G. Silva-Navarro       ISCORMA  2003  Dynamics of a Rigid Rotor in Non-Linear Squeeze-Film Dampers  J. I. Inayat-Hussain       ISCORMA  2003  Identification of Dynamic Stiffness of Squeeze Film Damper Using Active Magnetic Bearing System as an Exciter  K.-J. Kim and C.-W. Lee       ISCORMA  2003  Field Experience With Vibration of Well Balanced Rotors Due to Shaft-Bearing Misalignment and Other Factors  R. S. Norek       ISCORMA  2003  Dynamic Response of Rotor Bearing System Under the Effect of Residual Shaft Bow Mounted on Viscoelastic Suspensions  T. N. Shiau and E. K. Lee       ISCORMA  2003  Unbalance Response Prediction for Rotors on Ball Bearings Using Speed and Load Dependent Nonlinear Bearing Stiffness  D. P. Fleming and J. V. Poplawski       ISCORMA  2003  Vibration Control of Nonlinear Rotor Systems Using Dynamic Damper  Y. Ishida and T. Inoue       ISCORMA  2003  Experimental Determination of Rotor Bearing Parameters and Fluid Inertia Effect Using Nonsynchronous Perturbation Testing  D. E. Bently, D. W. Mathis, G. R. Thomas, and G. G. Nichols      ISCORMA  2003  Simulating and Testing the Transient Response of Rotors Equipped With Externally Pressurized Bearings Using State Space Modeling  D. E. Bently, D. W. Mathis, and J. M. Meagher       ISCORMA  2003  Normalization of Vibration Measurements: Unnecessary Complication or ImportantPrerequisite?