| TAMU Pump Show Papers | |||||
| Conference | Year | Paper Title | Paper Author | Page Number | Other |
| TAMU Pump Show | 1984 | Predicting & Improving the Dynamic Behavior of Multistage High Performance Pumps | Ulrich Bolleter, Arno Frei, Dusan Florjancic | 1 | |
| TAMU Pump Show | 1984 | Control of Backflow at the Inlets of Centrifugal Pumps and Inducers | Donald P. Sloteman, Paul Cooper, Jules L. Dussourd | 9 | |
| TAMU Pump Show | 1984 | Acoustic Resonance Phenomena in High Energy Variable Speed Centrifugal Pumps | Randal E. Schwartz, Richard M. Nelson | 23 | |
| TAMU Pump Show | 1984 | Does Impeller Diameter Affect NPSHR? | Daisuke Konno, Yoshiyuki Yamada | 29 | |
| TAMU Pump Show | 1984 | Improved Mechanical Seal Design Through Mathematical Modeling | Richard F. Salant, William E. Key | 37 | |
| TAMU Pump Show | 1984 | Horizontal Process Pump Modifications to Comply with API-610 Sixth Edition Forces and Moments | James E. Steiger | 47 | |
| TAMU Pump Show | 1984 | Air Model Testing to Determine Entrance Flow Fields | Joseph A. Silvaggio, Jr., Hans Spring | 57 | |
| TAMU Pump Show | 1984 | Experimental Determination of the Reverse Flow Onset in a Centrifugal Impeller | Jean Paul Barrand, Guy Caignaert, Richard Canavelis, P. Guiton | 63 | |
| TAMU Pump Show | 1984 | Maintenance and Troubleshooting of Single-Stage Centrifugal Pumps | W. Edward Nelson | 73 | |
| TAMU Pump Show | 1984 | Changes in Hydraulic Component Geometries Greatly Increased Power Plant Availability and Reduced Maintenance Costs: Case Histories | Elemer Makay, James A. Barrett | 85 | |
| TAMU Pump Show | 1984 | A Map of the Forest . . . Understanding Pump Suction Behavior: Where Do We Go From Here? | Igor J. Karassik | 101 | |
| TAMU Pump Show | 1984 | Symmetrical Seal Design: A Sealing Concept for Today | James P. Netzel | 109 | |
| TAMU Pump Show | 1984 | Selection Strategy For Mechanical Shaft Seals In Petrochemical Plants | Heinz P. Bloch | 115 | |
| TAMU Pump Show | 1984 | Pump Specifications That Improve Mechanical Seal Performance | James H. Ingram | 123 | |
| TAMU Pump Show | 1984 | Introduction to Rotordynamics of Pumps Without Fluid Forces | Malcolm E. Leader | 133 | |
| TAMU Pump Show | 1985 | Modern Cavitation Criteria for Centrifugal Pumps | S. Gopalakrishnan | 3 | |
| TAMU Pump Show | 1985 | A Solution for Variable Speed Vertical Pump Vibration Problems | Malcolm E. Leader | 11 | |
| TAMU Pump Show | 1985 | Forces on Centrifugal Pump Impellers | Belgacem Jery, Christopher E. Brennen, Thomas K. Caughey, Allan J. Acosta | 21 | |
| TAMU Pump Show | 1985 | Experimental Study of the Influence of Backflow Control on Pump Hydraulic-Mechanical Interaction | Paul J. Kasztejna, Charles C. Heald, Paul Cooper | 33 | |
| TAMU Pump Show | 1985 | Screw Pumps of One, Two and Three Screw Design | Joachim Wegener, Walter E. Cozza | 41 | |
| TAMU Pump Show | 1985 | Pump Selection and Application in a Pressurized Water Reactor Electric Generating Plant | David M. Kitch | 47 | |
| TAMU Pump Show | 1985 | Critical Speed Analysis of an Eight-Stage Centrifugal Pump | Kenneth E. Atkins, James D. Tison, J. C. Wachel | 59 | |
| TAMU Pump Show | 1985 | Flow Patterns Causing Instabilities in the Performance Curves of Centrifugal Pumps with Vaned Diffusers | Peter Hergt, Jörg Starke | 67 | |
| TAMU Pump Show | 1985 | The Prediction of Bearing Lubricant Temperatures and Cooling Requirements for a Centrifugal Pump | Charles A. Cappellino, James C. Osborne | 77 | |
| TAMU Pump Show | 1985 | A Powerful Application and Troubleshooting Method for Mechanical Seals | Thomas P. Will, Jr. | 85 | |
| TAMU Pump Show | 1985 | Flow Field Investigation for a Series of Right Angle Minimum Axial Depth Pump Intakes | Joseph H. G. Howard, Paul Hermann | 93 | |
| TAMU Pump Show | 1985 | Technical Features of Large Vertical Concrete Volute Pumps | Richard Canavelis, Jean-Pierre Daux, François d'Incá, Jean-Louis E. Bloch | 105 | |
| TAMU Pump Show | 1985 | Reliability Improvement In Mechanical Seals—Analysis of Design Considerations | Heinz P. Bloch, Wolfgang Schuebl | 115 | |
| TAMU Pump Show | 1985 | Reverse Indicator Cold Alignment with Graphical Plotting | Charles Jackson | 129 | |
| TAMU Pump Show | 1986 | Power Recovery Turbines for the Process Industry | S. Gopalakrishnan | 3 | |
| TAMU Pump Show | 1986 | Gas-Liquid Flow Through Centrifugal Pumps—Correlation of Data | Jim L. Turpin, James F. Lea, John L. Bearden | 13 | |
| TAMU Pump Show | 1986 | System Problem Experience in Multiple Reciprocating Pump Installations | William W. Parry, Jr. | 21 | |
| TAMU Pump Show | 1986 | Analytical and Experimental Techniques for Solving Pump Structural Resonance Problems | Robert E. Cornman | 27 | |
| TAMU Pump Show | 1986 | Design of Pump Shaft Trains Having Variable-Speed Electric Motors | Arno Frei, Andrej Grgic, Werner Heil, Armin Luzi | 33 | |
| TAMU Pump Show | 1986 | Rotordynamic Developments for High Speed Multistage Pumps | Stanley E. Pace, Stefan S. Florjancic, Ulrich Bolleter | 45 | |
| TAMU Pump Show | 1986 | The Effect of Specific Speed on the Efficiency of Single Stage Centrifugal Pumps | Eugene P. Sabini, Warren H. Fraser | 55 | |
| TAMU Pump Show | 1986 | Visual Studies of Cavitation in Pumping Machinery | Ronald Palgrave, Paul Cooper | 61 | |
| TAMU Pump Show | 1986 | Analysis of Nozzle Loads for Process Pumps | Takio Shimizu, Hironori Teshiba | 69 | |
| TAMU Pump Show | 1986 | Development of an Advanced Gas Turbine Driven High-Speed Centrifugal Pump for Injection Services | Erio Benvenuti, Robert T. Ross | 77 | |
| TAMU Pump Show | 1986 | An Overview of Hardfaced Coatings for Industrial Use | Edward R. Buchanan | 91 | |
| TAMU Pump Show | 1986 | Pump-Pro—A Centrifugal Pump Diagnostic Expert System | Thomas J. Fritsch | 97 | |
| TAMU Pump Show | 1986 | Coatings for Centrifugal Pump Components | Robert C. Tucker, Jr. | 107 | |
| TAMU Pump Show | 1986 | API 610 Baseplate and Nozzle Loading Criteria | James E. Steiger | 113 | |
| TAMU Pump Show | 1986 | Practical Considerations for Pump Baseplates, Grouting and Foundations | Malcolm G. Murray, Jr. | 131 | |
| TAMU Pump Show | 1987 | Development of Experience with a New Thrust Bearing System for Centrifugal Pumps | Hurlel G. Elliott, Donald W. Rice | 3 | |
| TAMU Pump Show | 1987 | Reducing ANSI Pump Maintenance Costs Through Component Upgrades | Joseph B. Dosch | 9 | |
| TAMU Pump Show | 1987 | The Effects of Slurries on Centrifugal Pump Performance | George Wilson | 19 | |
| TAMU Pump Show | 1987 | Experiences with a Numerical Method of Calculating Slurry Pump Casing Wear | Graeme R. Addie, Robert J. Visintainer, Mihail C. Roco | 27 | |
| TAMU Pump Show | 1987 | Considerations for Proper Sizing and Material Selection to Optimize Slurry Pump Performance | Gary Davidson | 35 | |
| TAMU Pump Show | 1987 | Complete Analysis and Simulation of Reciprocating Pumps Including System Piping | Pawan J. Singh, Nateri K. Madavan | 55 | |
| TAMU Pump Show | 1987 | Vibration Monitoring of Vertically Mounted Pumps—Tools for Manufacturers and Users | Thomas J. Walter, Matthew M. Marchione, H. Gordon Shugars | 75 | |
| TAMU Pump Show | 1987 | Solving the Vibration Problem of a Vertical Multistage Cryogenic Pump | Ching M. Chang, Fred W. Braun | 85 | |
| TAMU Pump Show | 1987 | The Effect of Design Features on Centrifugal Pump Efficiency | Eugene P. Sabini, Warren H. Fraser | 97 | |
| TAMU Pump Show | 1987 | Economically Matching Circulation Water Flow to Cooling Tower Load | David A. Fairbanks | 103 | |
| TAMU Pump Show | 1987 | Pump Vibration Analysis for the Amateur | W. Edward Nelson | 109 | |
| TAMU Pump Show | 1987 | Development of an Incipient Failure Detection Technique for Mechanical Seals | Tadashi Kataoka, Chishiro Yamashina, Masahiro Komatsu | 121 | |
| TAMU Pump Show | 1987 | Pumps and Materials for Flue Gas Desulphurization Plants | Winfried Schöffler | 133 | |
| TAMU Pump Show | 1988 | Solutions to Abrasive Wear-Related Rotordynamic Instability Problems on Prudhoe Bay Injection Pumps | Robert A. Valantas, Ulrich Bolleter | 3 | |
| TAMU Pump Show | 1988 | A New Computer Program for Pump Rotordynamic Analysis | Jorgen L. Nikolajsen, Richard J. Gajan | 11 | |
| TAMU Pump Show | 1988 | Face Seal Balance Ratio Selection for Two Phase Single and Multicomponent Mixtures | Alan O. Lebeck | 17 | |
| TAMU Pump Show | 1988 | Metal Bellows Mechanical Face Seals for High Performance Pump Applications | Amit Datta, James F. Gardner, James U. Derby, David P. Casucci | 27 | |
| TAMU Pump Show | 1988 | A New Method for Computing Minimum Flow | S. Gopalakrishnan | 41 | |
| TAMU Pump Show | 1988 | Reliability and Future Development of High Pressure Diaphragm Pumps for Process Service | Gerhard Vetter | 49 | |
| TAMU Pump Show | 1988 | Vertical Diffuser Type Turbine, Mixed-Flow, and Axial-Flow Propeller Pumps—A Brief Overview | Herman A. J. Greutink | 65 | |
| TAMU Pump Show | 1988 | New Developed Multistage Variable Speed Drive (MSVD) of High Economy for the Speed Control of Pumps with Power Up to 40,000 HP | Walter Rappold | 73 | |
| TAMU Pump Show | 1988 | Rotordynamic Considerations in the Design of High Speed, Multistage Centrifugal Pumps | Jan J. Verhoeven | 81 | |
| TAMU Pump Show | 1988 | Centrifugal Pump Specification and Selection—A System's Approach | Stan T. Shiels | 93 | |
| TAMU Pump Show | 1988 | Design and Operation of Pumps for Hot Standby Service | Charles C. Heald, David G. Penry | 109 | |
| TAMU Pump Show | 1988 | Pump Baseplate Installation and Grouting | Perry C. Monroe, Jr. | 117 | |
| TAMU Pump Show | 1988 | An Open Letter to the Pump Industry | Igor J. Karassik, J. T. McGuire | 129 | |
| TAMU Pump Show | 1988 | Condition Monitoring of Rolling Element Bearings Installed in Centrifugal Pumps | Jerome A. Lorenc | 135 | |
| TAMU Pump Show | 1988 | User Experience with Portable Data Terminals in a Machinery Monitoring Program | John M. Cummings | 147 | |
| TAMU Pump Show | 1988 | High Head-Low Flow Centrifugal Pumps | Conrad C. Mowrey | 155 | |
| TAMU Pump Show | 1988 | Characteristics of the Reciprocating Pump | John E. Miller | 163 | |
| TAMU Pump Show | 1988 | Specifying Minimum Flow | Paul Cooper, James A. Barrett, Peter R. Stech, S. Gopalakrishnan, W. Edward Nelson, Charles C. Heald, Bruno Schiavello | 177 | |
| TAMU Pump Show | 1989 | The Effect of Seal Chamber Design on Seal Performance | Michael P. Davison | 3 | |
| TAMU Pump Show | 1989 | Heat Transfer in Mechanical Seals | Gordon S. Buck | 9 | |
| TAMU Pump Show | 1989 | Vibration Assessment of Variable Speed Vertically Mounted Pumps | Thomas J. Walter, Shalom Zelingher | 17 | |
| TAMU Pump Show | 1989 | Vibration Behavior of Heber Hydrocarbon Booster Pumps | Donald W. McLaughlin, John F. Nagy, Jonne L. Berning | 23 | |
| TAMU Pump Show | 1989 | Centrifugal Pump Hydraulics for Low Specific Speed Applications | Trygve Dahl | 31 | |
| TAMU Pump Show | 1989 | Reciprocating Pump Valve Design | Gerhard Vetter, Erwin Thiel, Ulrich Störk | 39 | |
| TAMU Pump Show | 1989 | Upstream Pumping: New Developments in Mechanical Seal Designs | Afzal Ali | 53 | |
| TAMU Pump Show | 1989 | The Development of an Advanced Mechanical Seal for Slurry Applications | Duncan K. Irons | 59 | |
| TAMU Pump Show | 1989 | Design, Construction & Test of Magnetic Bearings in an Industrial Canned Motor Pump | Paul E. Allaire, Joseph Imlach, John P. McDonald, R. R. Humphris, D. W. Lewis, B. B. Banerjee, B. J. Blair, J. Claydon, R. D. Flack | 65 | |
| TAMU Pump Show | 1989 | Dry Start Bearing for Vertical Pumps | Hiroshi Satoh, Hirohisa Takeda | 75 | |
| TAMU Pump Show | 1989 | Rolling Bearings in Centrifugal Pumps | Keith E. Meyers | 91 | |
| TAMU Pump Show | 1989 | Inspection and Quality Control | Joe H. Babineaux | 101 | |
| TAMU Pump Show | 1990 | New Developments in Standby Seals for Applications for Environmentally Sensitive Duties | Jeremy Heatley, Matthew Giffrow | 3 | |
| TAMU Pump Show | 1990 | Evolution of a Mechanical Seal Condition Monitoring System | Frank Olmos | 9 | |
| TAMU Pump Show | 1990 | Root Cause Analysis of Five Costly Centrifugal Pump Failures | Heinz P. Bloch | 15 | |
| TAMU Pump Show | 1990 | Considerations in Hot and Cold Alignment and Couplings | Charles Jackson | 27 | |
| TAMU Pump Show | 1990 | Experimental Evaluation of Bladder Type Dampeners for Reciprocating Pumps | Pawan J. Singh, William K. Chaplis | 39 | |
| TAMU Pump Show | 1990 | Improving Pump Reliability in Light Hydrocarbon and Condensate Service with Metal Filled Graphite Wear Parts | Robert P. Komin | 49 | |
| TAMU Pump Show | 1990 | Design of Magnetically Driven Chemical Pump to Fit ANSI B73.1 Dimensions Using a Semiopen Impeller | Frederic W. Buse, C. Dean Stoughton | 55 | |
| TAMU Pump Show | 1990 | Design, Construction, and Applications of Magnetically Coupled Centrifugal Pumps | Harry Schommer, Thomas G. Johnson | 63 | |
| TAMU Pump Show | 1990 | Pump Rotor Critical Speeds Diagnosis and Solutions | Dennis G. Bowman, William D. Marscher, Stephen R. Reid | 73 | |
| TAMU Pump Show | 1990 | Rotordynamic and Dry Running Behavior of a Full Scale Test Boiler Feed Pump | Arno Frei, Johann Gulich, Guenther Eichhorn, Josef Eberl, Thomas H. McCloskey | 81 | |
| TAMU Pump Show | 1990 | Magnetically Driven Centrifugal Pumps: Eliminating Seal Problems in Refinery and Chemical Processing Plant Equipment | Jared D. Mayes | 93 | |
| TAMU Pump Show | 1990 | ISO 5199 Standard Addresses Today's Reliability Requirements for Chemical Process Pumps | Peter Fabeck, R. Barry Erickson | 101 | |
| TAMU Pump Show | 1990 | And What of the Future? | Igor J. Karassik | 119 | |
| TAMU Pump Show | 1990 | Vibration Monitoring and Analysis of Pumps | Kevin R. Guy | 123 | |
| TAMU Pump Show | 1990 | A User's View of Sealless Pumps—Their Economics, Reliability, and the Environment | Ronald G. Eierman | 127 | |
| TAMU Pump Show | 1990 | Selection of Coatings for Pump Applications | Paul S. Gupton | 135 | |
| TAMU Pump Show | 1991 | Elimination of Cavitation-Related Instabilities and Damage in High-Energy Pump Impellers | Paul Cooper, Donald P. Sloteman, Edward Graf, Dirk J. Vlaming | 1 | |
| TAMU Pump Show | 1991 | Solution to Cavitation Induced Vibration Problems in Crude Oil Pipeline Pumps | Ulrich Bolleter, Diether Schwarz, Brian Carney, Earl A. Gordon | 21 | |
| TAMU Pump Show | 1991 | An Integral Balance Piston for Centrifugal Pump Impellers | Kevin Fairman, William J. Mabe | 29 | |
| TAMU Pump Show | 1991 | Efficient Multiphase Pump Station for Onshore Application and Prospects for Offshore Application | Winfried Neumann | 43 | |
| TAMU Pump Show | 1991 | Tandem Seals for Near Zero Hydrocarbon Emissions | William E. Key, George Wang, Kenneth E. Lavelle | 49 | |
| TAMU Pump Show | 1991 | Analysis of the Thermal Behavior in the Sealing Cavity of an Overhung API Process Pump | Lev Nelik | 57 | |
| TAMU Pump Show | 1991 | Changes in Pump Vibration Levels Caused by the Misalignment of Different Style Couplings | Jerome A. Lorenc | 63 | |
| TAMU Pump Show | 1991 | Measurement and Prediction of Full Scale Annular Seal Coefficients | Stefan S. Florjancic, Thomas H. McCloskey | 71 | |
| TAMU Pump Show | 1991 | Dual Containment Shells—Added Safety for Magnetically Driven Pumps | Peter Rix, Ron McLean | 85 | |
| TAMU Pump Show | 1991 | Techniques for Eddy Current Reduction in Magnetic Drives Using Metallic Containment Barriers | Jeffrey H. Smith, John B. Oliver | 97 | |
| TAMU Pump Show | 1991 | Single Plane Balancing | Charles Jackson | 105 | |
| TAMU Pump Show | 1991 | A User's Engineering Review of Sealless Pump Design Limitations and Features | Terry Hernandez | 129 | |
| TAMU Pump Show | 1991 | Supplier Quality Improvement Process | Richard M. Dubner | 147 | |
| TAMU Pump Show | 1992 | Development of a Magnetic Bearing API Process Pump with a Canned Motor | Lloyd Hanson, Joseph Imlach | 3 | |
| TAMU Pump Show | 1992 | Development and Qualification of a Magnetically Coupled Process Pump for API 610 7th Edition Services | Charles C. Heald, Paul W. Behnke, Richard F. Gussert | 9 | |
| TAMU Pump Show | 1992 | Benefits of a Balanced Interference Fit Bellows Seal Design in High Temperature Corrosive Applications | David P. Casucci, William J. McCollough | 23 | |
| TAMU Pump Show | 1992 | Inside the Sealless Pump | John Veness, Clifford J. Steer, Steven Rose | 29 | |
| TAMU Pump Show | 1992 | Liquefied Natural Gas Pump with Hydrostatic Journal Bearings | Tatsuo Katayama, Akihisa Okada | 39 | |
| TAMU Pump Show | 1992 | Design Considerations and Application Guidelines for Pumping Liquids with Entrained Gas Using Open Impeller Centrifugal Pumps | Charles A. Cappellino, Daniel R. Roll, George Wilson | 51 | |
| TAMU Pump Show | 1992 | Mechanical Seal Chamber Design for Improved Performance | Neal D. Barnes, Robert K. Flitney, B.S. Nau | 61 | |
| TAMU Pump Show | 1992 | Zero Emission Solutions for Mechanical Seals on Light Hydrocarbons | Neil M. Wallace, J.A.M. ten Houte de Lange | 69 | |
| TAMU Pump Show | 1992 | Design and Operation Refinement of a Multistage Light Hydrocarbon Pump | Kenneth R. Laplant, Charles R. Rutan | 77 | |
| TAMU Pump Show | 1992 | Evaluation of Coating for Resistance to Abrasive and Adhesive Wear in Pump Components | Colin McCaul, Roger Kaufold | 89 | |
| TAMU Pump Show | 1992 | Affordable Quasi Three-Dimensional Inverse Design Method for Pump Impellers | Hans Spring | 97 | |
| TAMU Pump Show | 1992 | Progressing Cavity Pumps Proper Selection and Application | Alan G. Wild | 111 | |
| TAMU Pump Show | 1992 | Corrosion in Pumps | Ronald S. Miller | 119 | |
| TAMU Pump Show | 1992 | Smoke or Substance?...Some Misconceptions about Desirable Construction Features of Centrifugal Pumps | Igor J. Karassik | 129 | |
| TAMU Pump Show | 1992 | Pump Vibrations | W. Edward Nelson, J. W. Dufour | 137 | |
| TAMU Pump Show | 1993 | Magnetic Fluid Seal System for Control of Pump Fugitive Emissions | William E. Key, Lionel A. Young, Will B. Mraz, Paul McMahan, Thomas J. Black | 3 | |
| TAMU Pump Show | 1993 | Enhanced Mechanical Seal Performance Through Proper Selection and Application of Enlarged-Bore Seal Chambers | William V. Adams, Richard H. Robinson, James S. Budrow | 15 | |
| TAMU Pump Show | 1993 | Pressure Pulsation Dampening Methods for Reciprocating Pumps | Gerhard Vetter, Bernd Seidl | 25 | |
| TAMU Pump Show | 1993 | Model Predictions and Experimental Results for the Rotordynamic Characteristics of Leakage Flows in Centrifugal Pumps | Adiel Guinzburg, Christopher E. Brennen | 41 | |
| TAMU Pump Show | 1993 | Design and Testing of a Zero-Net Radial Taper, Radially Compliant Face Seal | Alan O. Lebeck | 49 | |
| TAMU Pump Show | 1993 | Controlling Emissions to Atmosphere Through the Use of a Dry-Sliding Secondary Containment Seal | Patrick M. Flach, Jan E. Sandgren, David P. Casucci | 55 | |
| TAMU Pump Show | 1993 | Sintered Alpha Silicon Carbide Pump Bearings—Tribological Materials Optimization to Improve Reliability | Heinrich Knoch, Josef Kracker, William D. Long | 63 | |
| TAMU Pump Show | 1993 | Shaft Sizing for Multistage Pumps | Ulrich Bolleter, Arno Frei | 71 | |
| TAMU Pump Show | 1993 | A Case History—Improved Hydraulic Design Lowers Cavitation Erosion and Vibrations of a Water Transport Pump | Stefan S. Florjancic, Alan D. Clother, Francisco Javier Lopez Chavez | 81 | |
| TAMU Pump Show | 1993 | The Shortcomings of Using Pump Suction Specific Speed Alone to Avoid Suction Recirculation Problems | Allan R. Budris | 91 | |
| TAMU Pump Show | 1993 | Vibration Problems with an Electric Motor for a Centrifugal Pump Installation | Lawrence Wray | 97 | |
| TAMU Pump Show | 1993 | Canned Motor and Magnetically Coupled Pumps—Applications, Operations, and Maintenance in a Chemical Plant | Melmut Vollmüller, Willi Seifert, Kenneth B. Fischer | 109 | |
| TAMU Pump Show | 1993 | Corrosion in Pumps and Other Damage Mechanisms | Ronald S. Miller | 119 | |
| TAMU Pump Show | 1993 | Cavitation and Recirculation Troubleshooting Methodology | Bruno Schiavello | 133 | |
| TAMU Pump Show | 1993 | Application of Variable Speed Electric Motors for Pumps | Stephen P. Murphy | 157 | |
| TAMU Pump Show | 1993 | Hydraulic Institute Sealless Standards | Joseph A. Cleary, Barry Erickson, Erik Fiske, H. Ray Perriman | 169 | |
| TAMU Pump Show | 1993 | Dynamic Loading on Pumps—Causes for Vibration | Stefan S. Florjancic, Arno Frei | 171 | |
| TAMU Pump Show | 1993 | Using Fault Trees to Determine the Root Causes of Rotating Equipment Failures | Robert X. Perez | 185 | |
| TAMU Pump Show | 1994 | A Team Approach to Quality Pump Procurement and Installation | Karen Self, Stephen Treichler, Mohammad Zamin | 3 | |
| TAMU Pump Show | 1994 | Thermal Test Analysis of Bearing Frame Inline Pumps on High Temperature Service | Bruce E. Freeland, Charles A. Cappellino, Douglas Paddock | 11 | |
| TAMU Pump Show | 1994 | The Development of Low Friction, Low Leakage Mechanical Seals Using Laser Technology | Neil M. Wallace, Heinz Konrad Müller | 19 | |
| TAMU Pump Show | 1994 | The Role of Off-Design Pump Operation on Mechanical Seal Performance | William V. Adams, Lee A. Waling, Randy R. Dingman, Joseph C. Parker | 29 | |
| TAMU Pump Show | 1994 | Monitoring Sealless Pumps for Metal-to-Metal Contact of the Internal Rotor | Julien Le Bleu, Jr. | 41 | |
| TAMU Pump Show | 1994 | Analysis and Testing of Alternative Bearings Materials for Applications in Sealless Pumps | Jerome A. Lorenc, Lev Nelik | 51 | |
| TAMU Pump Show | 1994 | CMA/STLE Pump Seal Mass Emissions Study | Thomas Kittleman, Michael Pope, William V. Adams | 57 | |
| TAMU Pump Show | 1994 | Design and Development of Gas Lubricated Seals for Pumps | James R. Wasser, Rick Sailer, Greg Warne | 63 | |
| TAMU Pump Show | 1994 | Reliability Improvements to a High Pressure, High Temperature, Thirteen Stage Charge Pump | Dave A. Johns | 69 | |
| TAMU Pump Show | 1994 | Rotating Equipment Pump Reliability Upgrading Project | Ed Ringstead | 77 | |
| TAMU Pump Show | 1994 | Computational Fluid Dynamical Analysis of Complex Internal Flows in Centrifugal Pumps | Paul Cooper, Edward Graf, Timothy Luce | 83 | |
| TAMU Pump Show | 1994 | Improvement of a High Temperature Bellows Seal | William E. Key, Ronald L. Grace, Kenneth E. Lavelle, Lionel A. Young, George Wang, Al C. Holman | 95 | |
| TAMU Pump Show | 1994 | Oil Mist Lubrication for the Petro Chemical Industry | Charlie Towne | 107 | |
| TAMU Pump Show | 1994 | Sealless Centrifugal Pumps | David Littlefield | 115 | |
| TAMU Pump Show | 1994 | How to Avoid Building Problems into your Pumping Systems | W. Edward Nelson, John W. Dufour | 125 | |
| TAMU Pump Show | 1994 | Positive Displacement Pumps—Performance and Application | David B. Parker | 137 | |
| TAMU Pump Show | 1994 | Composite Pumps | Frederic W. Buse | 141 | |
| TAMU Pump Show | 1995 | Justifying the Reinstallation and Upgrading of Problem ANSI Pumps at an Operating Chemical Plant | Joseph F. Dolniak | 3 | |
| TAMU Pump Show | 1995 | Design and Implementation of a Mechanical Seal Improvement Program at an Oil Refinery | Johnny J. Pellin, William J. McCollough | 11 | |
| TAMU Pump Show | 1995 | Dual Gas Sealing Technology for Pumps | William V. Adams, Randy R. Dingman, Joseph C. Parker | 19 | |
| TAMU Pump Show | 1995 | Design and Testing of Dual Seal Series Arrangements for Pressurized Barrier Fluid | Kenneth E. Lavelle, William E. Key, Al C. Holman | 31 | |
| TAMU Pump Show | 1995 | Modern Manufacturing of Advanced Impeller and Diffuser Vane Profiles | Helmut Riegger, Alexander Nicklas | 37 | |
| TAMU Pump Show | 1995 | Understand Progressing Cavity Pumps Characteristics and a Void Abrasive Wear | Gerhard Vetter, Wolfgang Wirth | 47 | |
| TAMU Pump Show | 1995 | Effect of Mechanical Unbalance on Vibrations, Forces and Reliability of a Single-Stage Centrifugal Pump | Lev Nelik, Charles Jackson | 61 | |
| TAMU Pump Show | 1995 | Magnetic Bearings as an Impeller Force Measurement Technique | Adiel Guinzburg, Frederic W. Buse | 69 | |
| TAMU Pump Show | 1995 | Dry Running Tests Utilizing Silicon Carbide Bearings and Polymer Lubricating Strips with Conductive and Nonconductive Containment Shells in an ANSI Magnetic Drive Pump | Anthony E. Stavale | 77 | |
| TAMU Pump Show | 1995 | Dry Running Bellows Type Tandem Seals for VOC Services | Reid W. Engstrom, David P. Casucci, Michael Kotlyar | 83 | |
| TAMU Pump Show | 1995 | Testing and Field Performance of a High Duty NGL Pipeline Seal | Kenneth E. Lavelle, William J. Woods | 89 | |
| TAMU Pump Show | 1995 | Experimental Evaluation of High Energy Pump Improvements Including Effects of Upstream Piping | Donald P. Sloteman, Timothy L. Wotring, Patrick March, Dan McBee, Larry Moody | 97 | |
| TAMU Pump Show | 1995 | Judge the Pump Hydraulic Design Through Numbers Before You Buy | Hans Spring | 113 | |
| TAMU Pump Show | 1995 | A Name Well Chosen | Igor J. Karassik | 121 | |
| TAMU Pump Show | 1995 | The Road to Reliable Pumps | Perry C. Monroe, Jr. | 125 | |
| TAMU Pump Show | 1995 | Centrifugal Pumps Inspection and Testing | Vinod P. Patel, James R. Bro | 143 | |
| TAMU Pump Show | 1995 | Centrifugal Pump Application—Key Hydraulic and Performance Criteria | Stan T. Shiels | 151 | |
| TAMU Pump Show | 1995 | Shaft Alignment | Jack Essinger | 163 | |
| TAMU Pump Show | 1995 | Monitoring Repairs to Your Pumps | W. Edward Nelson | 189 | |
| TAMU Pump Show | 1995 | Diaphragm Development Trends for Safe Leakfree Reciprocating Process Pumps | Gerhard Vetter, Eberhard Schlücker, Waldemar Horn, William E. Neis | 207 | |
| TAMU Pump Show | 1995 | The Effects of Valve Dynamics on Reciprocating Pump Reliability | Stephen M. Price, Donald R. Smith, James D. Tison | 221 | |
| TAMU Pump Show | 1996 | Experimental Investigations in Respect to the Relevance of Suction Specific Speed for the Performance and Reliability of Centrifugal Pumps | Bernd Stoffel, Ralf Jaeger | 3 | |
| TAMU Pump Show | 1996 | The Suction Performance of Centrifugal Pumps Possibilities and Limits of Improvements | Peter Hergt, Alexander Nicklas, Gerhard Moellenkopf, S. Brodersen | 13 | |
| TAMU Pump Show | 1996 | Design and Testing of Seals to Meet API 682 Requirements | Ralph Gabriel, Syed K. Niamathullah | 27 | |
| TAMU Pump Show | 1996 | Development of a Noncontacting Seal for Gas/Liquid Applications Using Wavy Face Technology | Lionel A. Young, William E. Key, Ronald L. Grace | 39 | |
| TAMU Pump Show | 1996 | Centrifugal Pump Vibration Caused by Supersynchronous Shaft Instability | Donald R. Smith, Stephen M. Price, Friedrich K. Kunz | 47 | |
| TAMU Pump Show | 1996 | Torsional Vibration in Pump/Driver Shaft Trains—The Role of External Damping From Pump Impellers | Rainer Nordmann, Peter Weiser, Arno Frei, Rudolf Stuerchler | 61 | |
| TAMU Pump Show | 1996 | Field Investigation of Bearing Housing Oil Cleanliness | William V. Adams, R. Barry Erickson, Bill Needelman, Michael D. Smith | 71 | |
| TAMU Pump Show | 1996 | Double Row Angular Contact Ball Bearings in Centrifugal Pumps | Keith E. Meyers | 81 | |
| TAMU Pump Show | 1996 | A Case Study: Unusual Problems Discovered During the Rerate of 2800 HP Boiler Feedwater Pumps and Turbines | John P. Henderson | 89 | |
| TAMU Pump Show | 1996 | The Control of Variable Speed Pumps in Parallel Operation | Anthony B. Crease | 97 | |
| TAMU Pump Show | 1996 | Mag Drive Pumps: Why They Work—How They Fail | Micheal T. Stevens | 105 | |
| TAMU Pump Show | 1996 | ASME B73.1M Pump Reliability Program Formation—A Data Based Approach | Steven J. Hrivnak | 115 | |
| TAMU Pump Show | 1996 | Improved Mechanical Seal for High Pressure Pumps in Severe Abrasive Tailings Services | Rod Mosher, Doug McCullough, Frank E. Manning | 125 | |
| TAMU Pump Show | 1996 | Determination of NPSHR for Reciprocating Positive Displacement Pumps—A New Approach | Pawan J. Singh, Stephen D. Able | 131 | |
| TAMU Pump Show | 1996 | Abrasive Wear in Pumps—A Tribometric Approach to Improve Pump Life | Gerhard Vetter, Ralph Kießling, Wolfgang Wirth | 143 | |
| TAMU Pump Show | 1996 | Multiphase Gas-Liquid Pumping | Paul Cooper, Bruno Schiavello, Charles de Marolles, Jacques de Salis, Allan J. Prang, Daniel H. Broussard | 159 | |
| TAMU Pump Show | 1996 | The Use of Basic Hydraulics to Solve Field Problems | Lev Nelik, Joseph A. Silvaggio, Jr., John P. Joseph II, Jeffery Freeman | 175 | |
| TAMU Pump Show | 1996 | Material Problems and Solutions—A Metallurgical Perspective | Colin McCaul | 183 | |
| TAMU Pump Show | 1996 | Slurry Pipeline Design for Operation with Centrifugal Pumps | Graeme R. Addie | 193 | |
| TAMU Pump Show | 1997 | Mechanical Seal Reliability Improved with API Piping Plans 23 | V. Ray Dodd and Thomas E. Hinkel | 1 | |
| TAMU Pump Show | 1997 | Pressure Ratings of Mechanical Seals | Gordon S. Buck | 7 | |
| TAMU Pump Show | 1997 | Replacement of the Boiler FeedPumps During the Retrofit of the 500 MW Units at a German Power Station | Cord H. Laux, Uwe Burchhardt, and Uwe Kirstein | 15 | |
| TAMU Pump Show | 1997 | Rebuilding Process Pumps to Comply with Fugitive Emissions Standards | Stephen C. Rossi and John B. Cary | 25 | |
| TAMU Pump Show | 1997 | Development and Field Test Results of High Performance Seals for an NGL Injection Pump | Thomas D. Maceyka, Peter Kay, and David R. Leet | 35 | |
| TAMU Pump Show | 1997 | Design and Application of Dual Gas Seals for Small Bore Seal Chambers | Alan O'Brien and James R. Wasser | 43 | |
| TAMU Pump Show | 1997 | Control Valve Induced Pipeline Vibrations in a Paper Pulp Pumping System | Andrew L. Lewis, Fred R. Szenasi, and Daniel R. Roll | 49 | |
| TAMU Pump Show | 1997 | The Application of Computer Simulation and Real-Time Monitoring to Minimize the Pressure Pulsations in Complex Pumping Systems | Edward Graf and John F. Marchi, Jr. | 61 | |
| TAMU Pump Show | 1997 | Two-Phase Flow Performance of a Heat Transport Pump | H. Samarasekera | 69 | |
| TAMU Pump Show | 1997 | Twenty-Three Years Operating Experience with the World's Largest Boiler Feedwater Pump | Frank L. Michell, Daniel H. Drew, Timothy L. Wotring, and Richard P. Koch | 75 | |
| TAMU Pump Show | 1997 | Bone-Dry Running Tests Utilizing Diamond Like Carbon Coated Silicon Carbide Bearings and Polymer Lubricating Strips in an Ansi Magnetic Drive Pump | Anthony E. Stavale | 85 | |
| TAMU Pump Show | 1997 | Diamond Like Carbon Coatings-Tribological Possibilities and Limitations in Applications on Sintered Silicon Carbide Bearing and Seal Faces | Michael Fundus and Heinrich Knoch | 93 | |
| TAMU Pump Show | 1997 | A Comparison of Positive Displacement and Centrifugal Pump Applications | John E. Purcell and Joseph A. Silvaggio, Jr. | 99 | |
| TAMU Pump Show | 1997 | Pump Life-Cycles and the Internet-Utilizing Technology to Improve Pump Reliability | Paul Shank | 105 | |
| TAMU Pump Show | 1997 | Present Limits of Operation of Product Lubricated and Magnetic Bearings in Pumps | Michael K. Swann, Jonathan Watkins, and Kevin R. Bornstein | 113 | |
| TAMU Pump Show | 1997 | Oil Lubrication Systems for Process Pumps and Related Equipment | Vinod P. Patel and Donald G. Coppins | 129 | |
| TAMU Pump Show | 1997 | Application of the Pitot Pump | Thomas L. Angle, Aleksander S. Roudnev, and James G. Shaw | 144 | |
| TAMU Pump Show | 1997 | Progressing Cavity Pump | Kent Whitmire | 149 | |
| TAMU Pump Show | 1997 | Air Operated Double Diaphragm Pumps | Charles W. Taylor and William F. Versaw | 157 | |
| TAMU Pump Show | 1997 | The Application of Hydraulically Actuated Diaphragm Metering Pumps | Daniel W. Chacchia | 161 | |
| TAMU Pump Show | 1997 | Troubleshooting Tactics to Improve Pump Mean Time Between Repairs | John P. Joseph II and Perry C. Monroe Jr. | 171 | |
| TAMU Pump Show | 1998 | Computer Simulation of the Flowpath in Magnetic Sealless Pumps | Adiel Guinzburg, Frederic W. Buse | 1 | |
| TAMU Pump Show | 1998 | CFD Analysis of a Double Suction Cooling Water Pump | John P. Pembroke, Eugene P. Sabini, David E. Littlefield | 11 | |
| TAMU Pump Show | 1998 | Analyzing Unacceptable Seal Performance | Patrick M. Flach, Mark J. Murphy, William I. Anderson | 21 | |
| TAMU Pump Show | 1998 | Pump Reliability Improvements Through Effective Seals and Coupling Management | Neil M. Wallace, T. John David | 27 | |
| TAMU Pump Show | 1998 | Hydraulically Rerating Centrifugal Pumps to Improve Reliability | Robert X. Perez, Claude Knight, Jr. | 41 | |
| TAMU Pump Show | 1998 | An Innovative Upgrade and Performance Rerate Of Large, High Speed, High Temperature, Multistage Barrel Pumps | Jan J. Verhoeven, David Redpath, Angus F. Kerr | 51 | |
| TAMU Pump Show | 1998 | The Use of Wavy Face Technology in Various Gas Seal Applications | Lionel A. Young, Michael B. Huebner | 61 | |
| TAMU Pump Show | 1998 | A New Method for Secondary Containment of Emissions from Primary Seals | Allan Mathis, Joseph L. Melancon, Fred Trackwell | 69 | |
| TAMU Pump Show | 1998 | Experience in the Use of Flexure Pivot Tilt Pad Bearings In Boiler Feed Water Pumps | W.E. Kepple, Dave W. Read, Fouad Y. Zeidan, Christian Paraskevakos, Matthew P. Dawson | 77 | |
| TAMU Pump Show | 1998 | Cavitation Effects on Pump Thrust Leading to Bearing Failures | E.V. Wilkinson, Robert R. Ross, Ron L. Edmisten | 85 | |
| TAMU Pump Show | 1998 | Application Guidelines for Pumping Liquids That Have a Large Dissolved Gas Content | Daniel W. Wood, Robert J. Hart, Ernesto Marra | 91 | |
| TAMU Pump Show | 1998 | Effects of Entrained Air, Npsh Margin, and Suction Piping On Cavitation in Centrifugal Pumps | Allan R. Budris, Philip A. Mayleben | 99 | |
| TAMU Pump Show | 1998 | Pump Impeller Lifetime Improvement Through Visual Study of Leading-edge Cavitation | Frank C. Visser, Jack J.M. Backx, Jan Geerts, Mike Cugal, D. Miguel Medina Torres | 109 | |
| TAMU Pump Show | 1998 | Severe Suction Bell Damage in Large, Open Impeller, Vertical Turbine Pumps | Michael D. Smith | 119 | |
| TAMU Pump Show | 1998 | Continuous Monitoring of Sealless Pumps—The Next Step | Julien Le Bleu, Jr., James Lobach | 125 | |
| TAMU Pump Show | 1998 | Using Fiber-Optic Pressure Sensors to Detect Cavitation and Flow Instabilities in Centrifugal Pumps | Robert X. Perez, Chung E. Lee, Henry F. Taylor | 133 | |
| TAMU Pump Show | 1998 | High Temperature Twin Screw Pumps | David B. Parker | 139 | |
| TAMU Pump Show | 1998 | Methods of Investigation and Solution Of Stress, Vibration, and Noise Problems in Pumps | William D. Marscher, Jack S. Campbell | 143 | |
| TAMU Pump Show | 1998 | Polymer Composite Industrial Chemical Pumps | Frederic W. Buse, Charles A. Cappellino, Robert C. Rollings | 157 | |
| TAMU Pump Show | 1998 | Pump Rotordynamics Made Simple | Mark A. Corbo, Stanley B. Malanoski | 167 | |
| TAMU Pump Show | 1998 | Sleeve Type Bearings and Their Lubrication Systems In Vertical Turbine Pumps, Mixed Flow and Axial Flow Pumps | Herman A.J. Greutink | 205 | |
| TAMU Pump Show | 1998 | Reciprocating Pump Dynamic Concepts for Improved Pump Operations | Larry E. Blodgett | 211 | |
| TAMU Pump Show | 1999 | A Case History—Improvements to an Existing Cooling Tower Sump and Horizontal Split Case Pumps | Paul J. Wallen and Gregory S. Towsley | 1 | |
| TAMU Pump Show | 1999 | Finding and Eliminating Chronic Pump Failures | Clay Crook | 9 | |
| TAMU Pump Show | 1999 | High Pressure Noncontacting Mechanical Seal for API Applications | Gregory E. Klostermann | 17 | |
| TAMU Pump Show | 1999 | A Cavitation Resistant Hydrostatic Seal for High Pressure Breakdown | Warren C. Prouty, Derek S. Da Silva, Harry Farrell | 25 | |
| TAMU Pump Show | 1999 | Finite Element Transient Thermal Analysis of an Axially Split Horizontal Multistage Pump | Roland Kaiser, Wolfram Lienau, Douglas J. Peters | 35 | |
| TAMU Pump Show | 1999 | Case Study—Increasing the System Flow in an Existing Sump | D. Waylon Free, Blake P. Tullis, James R. Bird | 49 | |
| TAMU Pump Show | 1999 | Development of a Twin Hybrid Noncontacting Gas Seal and Its Application to Process Pumps | Shifeng Wu, Christopher A. Kowalski, Lynn E. Stafford | 59 | |
| TAMU Pump Show | 1999 | Double Gas Seal with Coplanar Coaxial Rayleigh Pad Faces for Pump Sealing Application | Alan O. Lebeck, Gabriel Albor | 69 | |
| TAMU Pump Show | 1999 | Guidelines to Maximize Reliability and Minimize Risk in Plants Using High Pressure Process Diaphragm Pumps | Eberhard Schlücker, James M. Blanding, Joseph F. Murray | 77 | |
| TAMU Pump Show | 1999 | Design and Operation of a Nonpressurized Dual Gas Seal in Light Hydrocarbons | Mark Cooper, Joseph C. Parker | 101 | |
| TAMU Pump Show | 1999 | Low Cost Reliability Through Operator Involvement | Mark Parris, Dan Cameron | 107 | |
| TAMU Pump Show | 1999 | Pump Reliability and Efficiency Increase Maintenance Program—Utilizing High Performance Thermoplastics | Tommy Hinkel, Matt Giffrow | 115 | |
| TAMU Pump Show | 1999 | Vane Pass Vibration—Source, Assessment, and Correction—A Practical Guide for Centrifugal Pumps | Fred L. Robinett, Johann F. Gülich, Thomas Kaiser | 121 | |
| TAMU Pump Show | 1999 | Pressurized Lube Oil Systems | Vinod Patel, Don Coppins | 139 | |
| TAMU Pump Show | 1999 | How to Extend the Life of Your Boiler Feed Pump | Joseph A. Silvaggio, Jr., Gary Krafft | 153 | |
| TAMU Pump Show | 1999 | The New Hydraulic Institute Pump Intake Design Standard | Jack Claxton, George E. Hecker, Arnold Sdano | 161 | |
| TAMU Pump Show | 1999 | How to Justify Machinery Improvements Using Reliability Engineering Principles | H. Paul Barringer, Todd R. Monroe | 171 | |
| TAMU Pump Show | 1999 | Component Balance for Centrifugal Pumps—Effects of Product Design, Balance Machine Tooling, and the Balancing Process on Balancing Repeatability | Mark A. Harris, Douglas Paddock, Joseph O. Voelkel, Kenneth D. Szymanski | 185 | |
| TAMU Pump Show | 2001 | Reducing Life-Cycle Costs for Pumps Handling Cryogenic Fluids | James P. Netzel, Joachim Voigt | 1 | Mechanical Seals; Mechanical Seals/Design |
| TAMU Pump Show | 2001 | Nuclear Waste Transfer Pump—Design, Analysis, Testing, and Operation | Richard F. Guardiani, F. Marshall Hauck, Stephen D. Riesenweber | 5 | Nuclear Pumps; Sealless Pumps; Slurry Pumps |
| TAMU Pump Show | 2001 | Seal Reliability and Performance Improvements in a Large, High Pressure, High Temperature Barrel Pump | Ed Wilcox | 17 | Mechanical Seals; Performance; Rotordynamics; Vibration |
| TAMU Pump Show | 2001 | Improving the Reliability and Performance of a Melt Pump Application in a Petrochemical Plant with Block Style Universal Joints | Andrew Hudson, Matthew A. McGinnity, Parthiv R. Amin | 27 | Turbines |
| TAMU Pump Show | 2001 | Developing Fixed-Fee Seal Agreements to Improve Pump Reliability | Marc L. Fontaine, Eileen Haflich | 31 | Failure Analysis; Maintenance; Mechanical Seals |
| TAMU Pump Show | 2001 | Mass Customized Design and Manufacturing System of Advanced Hydraulic Parts | Hiroyki Kato, Akira Goto, Hirokazu Takayama, Sumio Saito, Takashi Enomoto, Shiro Nabe | 43 | Efficiency; General Subjects; Model Testing; Performance |
| TAMU Pump Show | 2001 | Rotordynamic Integrity of a New Machine—A Vertical Hydraulic Turbine in Cryogenic Fluids, The | G.L.G.M. Habets, Anthony J. Smalley | 51 | Vertical Pumps; Rotordynamics; Turbines; Variable Speed Drives |
| TAMU Pump Show | 2001 | Numerical Prediction of Cavitation in Pumps | Philippe Dupont | 59 | Cavitation; NPSH |
| TAMU Pump Show | 2001 | Development of a Smart Pumping System | Anthony E. Stavale, Jerome A. Lorenc, Eugene P. Sabini | 67 | Expert Systems; Model Testing: Instability Performance Curves; Specification and Selection; Variable Speed Drives |
| TAMU Pump Show | 2001 | Principles and Application of a Diagnostic System for Mechanical Seals | Cord Schmidthals, Stephan F. Greitzke | 77 | Failure Analysis; Inspection and Quality Control; Maintenance; Mechanical Seals |
| TAMU Pump Show | 2001 | Pumps—2000 and Beyond | Paul Cooper | 83 | Pump 17 Welcome Address |
| TAMU Pump Show | 2001 | Selection of API 614, Fourth Edition, Chapter 3, General Purpose Lube Oil System Components for Rotating Process Equipment | Vinod P. Patel, Donald G. Coppins | 89 | Maintenance |
| TAMU Pump Show | 2001 | Tutorial on Cryogenic Submerged Electric Motor Pumps | Steve Rush, Lonn Hall | 101 | Sealless Pumps |
| TAMU Pump Show | 2001 | Best Practices in Selecting and Applying Positive Displacement Pumps | John E. Petersen | 109 | Positive Displacement Pumps |
| TAMU Pump Show | 2001 | Centrifugal Pump Mechanical Design, Analysis, and Testing | Greg Case, William D. Marscher | 119 | Vibration; Specification and Selection |
| TAMU Pump Show | 2001 | Toward Reduced Pump Operating Costs, Part Two—Avoiding Premature Failures | James P. Netzel, David Redpath, Neil M. Wallace | 135 | Failure Analysis; Mechanical Seals; Performance |
| TAMU Pump Show | 2001 | Pump Rerates—When and How | James T. McGuire | 147 | Maintenance |
| TAMU Pump Show | 2002 | Optimizing Pumping Systems to Minimize First or Life-Cycle Cost | Judy Hodgson, Trey Walters | 1 | |
| TAMU Pump Show | 2002 | Next Generation Pump Systems Enable New Opportunities for Asset Management and Economic Optimization | Fred M. Discenzo, Dennis Rusnak, Lloyd Hanson, Dukki Chung, Joseph Zevchek | 9 | |
| TAMU Pump Show | 2002 | The Use of Asbestos-Free Materials in Static Sealing on Pumps | Anthony R. Currie | 17 | |
| TAMU Pump Show | 2002 | Developments in Sealing Technology within Multiphase Pumping | John G. Evans, Sido Janssen | 25 | |
| TAMU Pump Show | 2002 | Best Practices in the Application and Maintenance of Oil Sump Lubrication of Horizontal Process Pumps | Brad Rake, Ray Terrell | 33 | |
| TAMU Pump Show | 2002 | Operation and Current Developments of Self-Contained, Self-Lubricating Thrust and Journal Bearings Systems | Matthew M. Marchione | 43 | |
| TAMU Pump Show | 2002 | Advances in Mechanical SealingCAn Introduction to API 682 Second Edition | Michael B. Huebner, Joseph M. Thorp, Gordon S. Buck, Cesar L. Fernandez | 59 | |
| TAMU Pump Show | 2002 | Containment Seals for API 682 Second Edition | Peter E. Bowden, Chris J. Fone | 67 | |
| TAMU Pump Show | 2002 | Numerical Simulation of BPF Pressure Pulsation Field in Centrifugal Pumps | Serguei Timouchev, Jean Tourret | 85 | |
| TAMU Pump Show | 2002 | Practical Use of Rotordynamic Analysis to Correct a Vertical Long Shaft Pump=s Whirl Problem | Mark A. Corbo, David B. Stefanko, Robert A. Leishear | 107 | |
| TAMU Pump Show | 2002 | Infinite Dry-Running and Solids-Handling via Combining Mag-Drive and Gas Seal Technology | Lev Nelik, Chris L. Miller, Dave McGinty | 121 | |
| TAMU Pump Show | 2002 | Prefilled Equipment BaseplatesCHow to Get a Superior Equipment Installation for Less Money | Todd R. Monroe, Kermit L. Palmer | 131 | |
| TAMU Pump Show | 2002 | Pumps and Their SystemsCA Changing Industry | Robert J. Hart | 141 | |
| TAMU Pump Show | 2002 | Toward Reduced Pump Operating Costs, Part 3 - Minimizing the Effects of Wear and Optimizing Pump Efficiency | James P. Netzel, Eugene P.Sabini | 145 | |
| TAMU Pump Show | 2002 | Avoiding Failures in Centrifugal Pumps | William D. Marscher | 157 | |
| TAMU Pump Show | 2002 | API 610 Ninth Edition Highlights | Jack D. Sanders, Roger L. Jones, Charles C. Heald | 177 | |
| TAMU Pump Show | 2002 | Mixer Mechanical Design - Fluid Forces | Ronald J. Weetman, Bernd Gigas | 203 | |
| TAMU Pump Show | 2003 | Thunder Horse Injection Pump | Paul Meuter, Wolfram Lienau, Thomas Felix, Andreas Schachenmann, Brian Germaine, Charles L. McDonald | 1 | |
| TAMU Pump Show | 2003 | Understanding the Performance of a Progressive Cavity Pump with Metallic Stator | Jose Gamboa, Aurelio Olivet, Juan Carlos Iglesias, Pedro Gonzalez | 19 | |
| TAMU Pump Show | 2003 | Use of Noncontacting Seals in Volatile Services | Bob Goodenberger, Douglas E. Barron, Jason Marquardt | 33 | |
| TAMU Pump Show | 2003 | Developments in High Performance Seal Designs for Critical High Pressure Offshore and Pipeline Applications | John L. Morton, John G. Evans | 39 | |
| TAMU Pump Show | 2003 | Cavitation Study in a High Pressure Water Injection Pump | Erik Torbergsen, Sigve Gjerstad, Andreas Hosøy, Brian Aasland | 49 | |
| TAMU Pump Show | 2003 | Seismic Analysis on Modified Service Water Pumps | Karl Pottie, Angel Bayón, Carlos Rebollo, Manuel Ruiz de Lope, Miguel Mota | 57 | |
| TAMU Pump Show | 2003 | First Operating Experiences with the Integration of Split Sealing Constraints to a Gas Seal Challenge | Henri V. Azibert, Shifeng Wu | 67 | |
| TAMU Pump Show | 2003 | Advanced Gas Sealing Systems for Hydrofluoric Acid Alkylation and Other Extremely Hazardous Duties | Dan Kozlowski, Ebrahim Jahromi, Jim Wasser | 75 | |
| TAMU Pump Show | 2003 | Design Consideration for a Large Mixer Used in an Agitated Column Application | Andrew J. Creathorn | 83 | |
| TAMU Pump Show | 2003 | Application of Monte Carlo Simulations to System Reliability Analysis | Dennis C. Alexander | 91 | |
| TAMU Pump Show | 2003 | The Fundamentals of AC Electric Induction Motor Design and Application | Edward J. Thornton, J. Kirk Armintor | 95 | |
| TAMU Pump Show | 2003 | Selecting Steam Turbines for Pump Drives | Mike Cerce, Vinod Patel | 107 | |
| TAMU Pump Show | 2003 | Review of API 682, Second Edition | Mike Huebner | 117 | |
| TAMU Pump Show | 2003 | API 685 Tutorial | Shawn L. Bennett, Jim Bryant | 125 | |
| TAMU Pump Show | 2004 | PUMPING OIL SAND FROTH | Baha Abulnaga | 1 | |
| TAMU Pump Show | 2004 | CENTRIFUGAL PUMPS IN HEATED BITUMEN PIPELINE SERVICE | Ralph Dickau, Carlos Pardo | 10 | |
| TAMU Pump Show | 2004 | ABNORMAL VERTICAL PUMP SUCTION RECIRCULATION PROBLEMS DUE TO PUMP-SYSTEM INTERACTION | Bruno Schiavello, Donald R. Smith, Stephen M. Price | 18 | |
| TAMU Pump Show | 2004 | SELECTION OF LARGE WATER TRANSPORT PUMPS AND FIELD EXPERIENCES | Walter Bolliger, Erwin Leibundgut | 48 | |
| TAMU Pump Show | 2004 | DETERMINING THE CAUSE OF BEARING FAILURES IN CIRCULATING WATER PUMP MOTORS | Julia Postill, Malcolm E. Leader, Ray D. Kelm, Chesley Brown | 62 | |
| TAMU Pump Show | 2004 | ENHANCED MULTIPHASE FLOW PREDICTIONS IN TWIN-SCREW PUMPS | Allan J. Prang, Paul Cooper | 69 | |
| TAMU Pump Show | 2004 | MECHANICAL SEALS WITH WAVY SIC FACES FOR A SEVERE DUTY NGL/CRUDE PIPELINE APPLICATION | Bill Key, Ralph Dickau, Bob Carlson | 77 | |
| TAMU Pump Show | 2004 | MULTISTAGE PUMP EFFICIENCY GAINS THROUGH THE ELIMINATION OF THE SEAL CHAMBER PRESSURE EQUALIZATION LINE | Trey Maxwell, John Griffith | 88 | |
| TAMU Pump Show | 2004 | GROUTING OF SMALL PUMP BASEPLATES? IS IT WORTH IT? | Roger L. Jones, Chuck Lickteig, Jean J. Zoppe | 95 | |
| TAMU Pump Show | 2004 | DEMONSTRATION OF CAVITATION LIFE EXTENSION FOR SUCTION-STAGE IMPELLERS IN HIGH ENERGY PUMPS | Donald P. Sloteman, Douglas A. Robertson, Leo Margolin | 103 | |
| TAMU Pump Show | 2004 | DESIGN CONSIDERATIONS FOR NONCLOG PUMPS | Richard J. Cronin, David A.House, Alan C. Miller | 116 | |
| TAMU Pump Show | 2004 | SEALING SYSTEMS FOR WATER PUMPS | Alan Evans | 130 | |
| TAMU Pump Show | 2004 | OVERVIEW OF API 682 AND ISO 21049 | Michael Huebner | 131 | |
| TAMU Pump Show | 2004 | INTRODUCTION TO SEALING MIXERS IN THE PHARMACEUTICAL AND BIOTECH INDUSTRIES | Robert A. Smith | 138 | |
| TAMU Pump Show | 2005 | IDENTIFICATION OF BEARING HOUSING VIBRATIONS OF A LARGE BARREL TYPE INJECTION PUMP AND THEIR ANALYSIS BY MEANS OF THE FINITE ELEMENT METHOD | Wolfram Lienau, Peter Sandford, Yasar Deger | 1 | Lecture |
| TAMU Pump Show | 2005 | IMPELLER RERATE TO REDUCE HYDRAULICALLY GENERATED VIBRATION | Gary Dyson | 10 | Lecture |
| TAMU Pump Show | 2005 | DESIGNING AN ULTRA-LOW SPECIFIC SPEED CENTRIFUGAL PUMP | Hiroshi Satoh, Kazuo Uchida, Yinchun Cao | 16 | Lecture |
| TAMU Pump Show | 2005 | A NEW UNIQUE HIGH PRESSURE PUMP SYSTEM | Thomas L. Angle, James G. Shaw, Steve Cummins, Mike Turner | 22 | Lecture |
| TAMU Pump Show | 2005 | HARMONIC FREE MAGNETIC (FCMA) SOFT STARTERS FOR LARGE CAPACITY HIGH VOLTAGE INDUCTION AND SYNCHRONOUS MOTORS DRIVING PUMPS AND COMPRESSORS | Prafulla Deo, Mohan N. Gowaikar | 34 | Lecture |
| TAMU Pump Show | 2005 | UPTHRUST PROBLEMS ON MULTISTAGE VERTICAL TURBINE PUMPS | Donald R. Smith, Stephen Price | 46 | Lecture |
| TAMU Pump Show | 2005 | A VERY HIGH HEAD PUMP | J.T. McGuire, Vahe Hayrepetian | 58 | Lecture |
| TAMU Pump Show | 2005 | DESIGN AND DEVELOPMENT OF ELECTRIC SUBMERSIBLE PUMPS FOR LARGE CAPACITIES | Andreas Hosøy, Sigve Gjerstad, Jostein Smaamo, Erik Torbergsen | 69 | Lecture |
| TAMU Pump Show | 2005 | ACTIVE LIFT SEAL TECHNOLOGY IMPACTED ON WATER INJECTION SERVICES | John L. Morton, Joe Attard, John G. Evans | 77 | Lecture |
| TAMU Pump Show | 2005 | OPTIMIZING THE ASSET MANAGEMENT OF PUMPS THROUGH INTEGRATED ONLINE MONITORING | Deane Horn, Mark Granger | 85 | Lecture |
| TAMU Pump Show | 2005 | CENTRIFUGAL PUMP COOLING AND LUBRICANT APPLICATION—A “BEST TECHNOLOGY” UPDATE | Heinz P. Bloch | 92 | Lecture |
| TAMU Pump Show | 2005 | IMPROVEMENTS IN BEARING LIFE USING NEW SEALING TECHNOLOGY | Chris Rehmann | 103 | Lecture |
| TAMU Pump Show | 2005 | USE OF INDUCERS IN LIQUIFIED PETROLEUM GAS AND CONDENSATE SERVICE FOR BETTER PERFORMANCE | Trinath Sahoo | 112 | SPECIAL PAPER |
| TAMU Pump Show | 2005 | A NEW CONCEPT IN MECHANICAL SEAL COOLING—THE INTEGRAL HEAT SINK | Lyndon Scott Stephens, Matthew A. Hayden, Daryl S. Schneider | 117 | SPECIAL PAPER |
| TAMU Pump Show | 2005 | MATERIAL SELECTION FOR MECHANICAL SEALS | Michael Huebner | 127 | Tutorial |
| TAMU Pump Show | 2005 | BASIC PUMP ROTORDYNAMIC ANALYSIS AND SPECIFICATIONS | William D. Marscher | 136 | Tutorial |
| TAMU Pump Show | 2005 | PRACTICAL DESIGN AGAINST PUMP PULSATIONS | Mark. A Corbo, Charles F. Stearns | 137 | Tutorial |
| TAMU Pump Show | 2005 | PROCESSES AND PUMP SERVICES IN THE LNG INDUSTRY | David A. Coyle, Vinod Patel | 179 | Tutorial |
| TAMU Pump Show | 2007 | RELIABILITY IMPROVEMENTS TO A HIGH SPEED/HIGH ENERGY PUMP | Ed Wilcox | 1 | LECTURES |
| TAMU Pump Show | 2007 | EFFECTIVE ISOLATION TREATMENT OF VERTICAL PUMPS INCLUDING SEISMIC RESTRAINTS | Lyn Greenhill, Valerie Lease | 7 | LECTURES |
| TAMU Pump Show | 2007 | DRIVING PUMP RELIABILITY FORWARD WITH ADVANCED COMPOSITE WEAR RINGS | Robert Aronen, Brian Boulden, Martin Russek | 15 | LECTURES |
| TAMU Pump Show | 2007 | NUMERICAL SIMULATION ON A PUMP OPERATING IN A TURBINE MODE | Sonia Rawal, J.T. Kshirsagar | 21 | LECTURES |
| TAMU Pump Show | 2007 | CAVITATION IN HIGH ENERGY PUMPS— DETECTION AND ASSESSMENT OF DAMAGE POTENTIAL | Donald P. Sloteman | 29 | LECTURES |
| TAMU Pump Show | 2007 | VIBRATION FIELD PROBLEM RESOLVED WITH ANALYTICAL DIAGNOSTIC APPROACH AND INNOVATIVE IMPELLER DESIGN | Bruno Schiavello, Giancarlo Cicatelli | 39 | LECTURES |
| TAMU Pump Show | 2007 | GUIDELINES FOR APPLICATION OF HIGH TEMPERATURE DUAL SEALS | Gordon Buck | 51 | TUTORIALS |
| TAMU Pump Show | 2007 | ESTABLISHING AN ELECTRIC MOTOR LUBRICATION PROGRAM | Marianne Duncanson | 53 | TUTORIALS |
| TAMU Pump Show | 2007 | ELECTRONIC DATA EXCHANGE IN THE PUMP INDUSTRY | Kenneth Burkhardt, Trygve Dahl, Mark E. Palmer | 55 | TUTORIALS |
| TAMU Pump Show | 2007 | PUMP CAVITATION— VARIOUS NPSHR CRITERIA, NPSHA MARGINS, IMPELLER LIFE EXPECTANCY | Bruno Schiavello, Frank C. Visser | 67 | TUTORIALS |
| TAMU Pump Show | 2007 | AN ENDUSER’S GUIDE TO CENTRIFUGAL PUMP ROTORDYNAMICS | William D. Marscher | 69 | TUTORIALS |
| TAMU Pump Show | 2007 | MULTIPHASE PUMPS | Bob Heyl | 85 | TUTORIALS |
| TAMU Pump Show | 2007 | UPDATES IN PROGRESS FOR ISO 13709/API 610, CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES | Roger Jones | 97 | TUTORIALS |
| TAMU Pump Show | 2007 | ROAD TO RELIABLE PUMPS | Todd Monroe, Perry Monroe | 99 | TUTORIALS |
| TAMU Pump Show | 2008 | REDUCING RELIABILITY INCIDENTS AND IMPROVING MEANTIME BETWEEN REPAIR | Anthony E. Stavale | 1 | LECTURES |
| TAMU Pump Show | 2008 | HOW TO IMPROVE RELIABILITY IN CENTRIFUGAL PUMP SYSTEMS THROUGH THE AUTOMATIC TUNEUP OF PUMPS WITHIN THEIR BEST OPERATIONAL CONDITION | Guilherme Martins, Enio Lima | 11 | LECTURES |
| TAMU Pump Show | 2008 | APPLICATION OF NUMERICAL OPTIMIZATION TO SEAWATER PUMPING SYSTEMS | Joseph M. Thorp, Jeffrey A. Olsen | 19 | LECTURES |
| TAMU Pump Show | 2008 | NUMERICAL PREDICTION ON AIR ENTRAINMENT IN PUMP INTAKES | Shyam N. Shukla, Jagadish T. Kshirsagar | 29 | LECTURES |
| TAMU Pump Show | 2008 | EVALUATION OF ROTORDYNAMIC CRITERIA FOR MULTISTAGE PUMP SHAFTS | Wolfram Lienau, Nicolas Lagas | 35 | LECTURES |
| TAMU Pump Show | 2008 | POSITIVE DISPLACEMENT RECIPROCATING PUMP FUNDAMENTALS— POWERANDDIRECTACTINGTYPES | Herbert H. Tackett, Jr. ,James A. Cripe ,Gary Dyson | 45 | TUTORIALS |
| TAMU Pump Show | 2008 | TUTORIAL ON STEAM TURBINE DRIVERS FORFOSSILANDNUCLEARFEEDPUMPAPPLICATIONS | Jerry DiOrio | 59 | TUTORIALS |
| TAMU Pump Show | 2008 | GUIDELINESFORAPPLICATIONOFHIGHTEMPERATUREDUALSEALS | Gordon S. Buck | 69 | TUTORIALS |
| TAMU Pump Show | 2008 | ADJUSTABLE SPEED DRIVES APPLIED TOLARGEACINDUCTIONMOTORANDPUMPSYSTEMS | Timothy J. Cookson, Nicholas G. Lang, Edward J. Thornton | 75 | TUTORIALS |
| TAMU Pump Show | 2008 | ANALYSIS GUIDE FOR VARIABLE FREQUENCY DRIVE OPERATED CENTRIFUGAL PUMPS | Thomas F. Kaiser, Richard H. Osman, Ralph O. Dickau | 81 | TUTORIALS |
| TAMU Pump Show | 2009 | A VISION AND MISSION FOR PUMP R&D OVER THE NEXT 25 YEARS | Paul Cooper | 1 | |
| TAMU Pump Show | 2009 | CONTEMPORARY GUIDE TO MECHANICAL SEAL LEAKAGE | Jonn B. Merrill | 13 | |
| TAMU Pump Show | 2009 | POWER PUMP VALVE DYNAMICS | Terry Henshaw | 23 | |
| TAMU Pump Show | 2009 | DYNAMIC IMPROVEMENT OF AN OVERHUNG SINGLE·STAGE PUMP | Giacomo Marenco. Alessandro Nicchio. Alberto Piva | 33 | |
| TAMU Pump Show | 2009 | VALIDATION OF NUMERICAL PROCEDURE FOR ASSESSMENT OF CENTRIFUGAL PUMP CAVITATION EROSION | Serguei F. Timouchec, Sergey S. Panaiotti, Vladimir A. Knyazev", Vladimir A. Soldatov | 39 | |
| TAMU Pump Show | 2009 | HYBRID PUMP - A NEW TYPE OF PUMP FOR THE PAZFLOR DEEP SEA PROJECT | Pierre-Jenn Bibet. Bernard Quoix, Haakon Grimstad | 49 | |
| TAMU Pump Show | 2009 | A REVIEW OF NSS LIMITATIONS - NEW OPPORTUNlTIES | Michael Hirschberger, Ian .James | 59 | |
| TAMU Pump Show | 2009 | ACOUSTICS IN PUMPING SYSTEMS | Roberl J. McKee. Eugene Broerman | 69 | |
| TAMU Pump Show | 2009 | COMMISSIONING AND STARTUPS OF NEW UNITS (PUMPS) | W. Ed Wilkox, Mike White, Gordon Parks | 75 | |
| TAMU Pump Show | 2009 | SOLVING STRUCTURAL VIBRATION PROBLEMS USING OPERATING DEFLECTION SHAPE (ODS) AND FEA | Paul Boyadjis, Maki M. Onari | 85 | |
| TAMU Pump Show | 2009 | BEST PRACTICES FOR OPERATORS | Julien Le Bleu, Jr. | 103 | |
| TAMU Pump Show | 2009 | PUMP CAVITATION - VARIOUS NPSHR CRITERIA, NPSHA MARGINS, IMPELLER LIFE EXPECTANCY | Bruno Schiavello. Frank C. Visser | 113 | |
| TAMU Pump Show | 2009 | 25 YEARS OF DRIVING PUMP TECHNOLOGY - THE CONTRIBUTION OF THE PUMP SYMPOSIUM | Paul Cooper | 145 | |
| TAMU Pump Show | 2010 | VISUALIZATION STUDY OF THE PERFORMANCE BREAKDOWN IN THE TWO-PHASE PERFORMANCE OF AN ELECTRICAL SUBMERSIBLE PUMP | Jose Gamboa, Mauricio Prado | 1 | Lecture |
| TAMU Pump Show | 2010 | IMPROVING THE RELIABILITY OF A DECOKING JET PUMP TRAIN WITH A HYDRODYNAMIC VARIABLE SPEED DRIVE | Reinaldo Bermudez | 17 | Lecture |
| TAMU Pump Show | 2010 | UPSTREAM PUMPING TECHNOLOGY IN CENTRIFUGAL PUMP MECHANICAL SEALING APPLICATIONS-FIELD EXPERIENCE WITH HIGH DUTY SEAWATER INJECTION PUMPS | Vugar A. Mammadov, Agil Yusifov, Ken P. Tacon | 27 | Lecture |
| TAMU Pump Show | 2010 | AN IMPROVED HEAT SOAK CALCULATION FOR MECHANICAL SEALS | Gordon S. Buck, Tsu Yen Chen | 33 | Lecture |
| TAMU Pump Show | 2010 | IMPROVING RELIABILITY IN A HIGH STATIC HEAD SYSTEM THROUGH VFD APPLICATION | Guilherme Vasconcellos Martins, Enio von Haehling Lima | 39 | Lecture |
| TAMU Pump Show | 2010 | ASSESSMENT OF WEAR EROSION IN PUMP IMPELLERS | Susanne Kriiger, Nicolas Martin, Philippe Dupont | 51 | Lecture |
| TAMU Pump Show | 2010 | PRESSURIZED DUAL MECHANICAL SEALS SUPPORTING PIPING PLAN DEVELOPMENTS | Richard Smith | 57 | Lecture |
| TAMU Pump Show | 2010 | RISK-BASED PUMP SEAL SELECTION GUIDELINE COMPLEMENTING ISO 21049/API 682 | Michael Goodrich | 67 | Lecture |
| TAMU Pump Show | 2010 | MATERIALS SELECTION FOR SEAWATER PUMPS | Stephen J. Morrow | 73 | Tutorial |
| TAMU Pump Show | 2010 | HYDRAULIC MODELING AND SIMULATION OF PUMPING SySTEMS | Augusto Garcia-Hernandez, Melissa Wilcox, Thomas Moore | 81 | Tutorial |
| TAMU Pump Show | 2010 | CONVERSION OF A PIPELINE STATION FROM CENTRIFUGAL TO ROTARY POSITIVE DISPLACEMENT PUMPS | Morg M Bruck, Barry A. Butler, Michael L. Moore | 89 | Tutorial |
| TAMU Pump Show | 2010 | MECHANICAL SEAL PERFORMANCE AND RELATED CALCULATIONS | Tom Arnold, Chris Fone | 97 | Tutorial |