Search form for published papers in conferences related to rotordynamics.

Provided by Rotating Machinery Analysis, Inc.

Return to www.rotordynamics.org

List of conferences in the data base.

Enter search criteria
Conferences
Paper Title:
Paper Author:
From year:
To year:
Records per page:
Items found: 108 
After performing a search, to obtain a hardcopy of an article or entire proceeding try clicking on the link in the first column, which shows the name of the conference sponsor.
Papers
Conference Year Paper Title Paper Author Page Number Other
ASME Biennial  1989  Response of a Servomechanism Controlled Swinging Arm Actuator for Head Positioning in Magnetic Storage Devices  B. M. Khan and R. B. Bhat   1   
ASME Biennial  1989  Dynamic Optimization of a Rotor-Bearing Set  D. Bendeux and D. Doizelet   11   
ASME Biennial  1989  Experimental Verification of Blade-Disc-Rotor Coupled Torsional Vibration for Large Turbine   H. Kanki and Y. Yamamoto   17   
ASME Biennial  1989  Optimization Study of Engine Mounting Systems  S. Saitoh and M. Igarashi   23   
ASME Biennial  1989  A Convenient Method for Diagnosis of Shafting Crack  M. Zhao and Z. H. Luo   29   
ASME Biennial  1989  Flexibility Matrix Calculation for a Stepped Rotor Shaft  S. Doughty   35   
ASME Biennial  1989  Influence of Impeller Shroud Forces on Turbopump Rotor Dynamics  J. P. Williams and D. W. Childs   41   
ASME Biennial  1989  The Use of Beam-Like Modal Data for Stiffness Profile Estimation by the EBS Method - Part I: Justification and Implementation  T. A. Vest and M. S. Darlev   51   
ASME Biennial  1989  Vibration of Rotor Partially Filled With Two Kinds of Liquids  B. S. Yang, Y. H. Yu, and T. Iwatsubo   57   
ASME Biennial  1989  Fluid Induced Rotordynamic Instability of a Rotor With an Unbound Centrifugal Impeller  J. Colding-Jorgensen   63   
ASME Biennial  1989  A New Method for the Critical Speed Calculation of Rotor-Bearing Systems - Part I: Theory  P. Y. Klm, R. C. Flanagan, and L R. G. Lowe   71   
ASME Biennial  1989  A New Method for the Critical Speed Calculation of Rotor-Bearing Systems - Part II: Application  P. Y. Klm, R. C. Flanagan, and I. R. G. Lowe   77   
ASME Biennial  1989  Dynamic Response of Rotors Using Modal Reduction Techniques  R. Subblah, R. B. Bhat, and T. S. Sankar   83   
ASME Biennial  1989  Vibrations of Anisotropic Rotor-Bearing Systems  Y.-G. Jei and C.-W. Lee   89   
ASME Biennial  1989  Vibrations of Rotating Disc-Like Structures - A Transfer Matrix Approach  M. Ghosh, A. Rajamani, and IV. Ganesan   97   
ASME Biennial  1989  Identification of Modal Parameters of Rotating Systems Using Perturbation Techniques: Part 1   A. Muszynska, D. E. Bently, W. D. Franklin, and R. D. Hayashida   107   
ASME Biennial  1989  Identification of Modal Parameters of Rotating Systems Using Perturbation Techniques: Part 2   A. Muszynska, D. E. Bently, W. D. Franklin, and R. D. Hayashida   113   
ASME Biennial  1989  Periodic Response Investigation of Large Order Nonlinear Rotordynamic Systems Using Collocation   A. N. Jean and H. D. Nelson   119   
ASME Biennial  1989  Coupled Bending - Bending Vibrations of Rotating Pretwisted Cantilever Blades-Method of Polynomial Frequency Equation   P. V. Reddy, K. N. Gupta, and J. S. Rao   129   
ASME Biennial  1989  Coupled Vibration Analysis: Torsional Vibration of Turbine-Generator-Blade Coupled System   A. Okabe, R. Kaneko, O. Matsushita, K. Namura, and T. Yoshida   135   
ASME Biennial  1989  Modeling Rotating Shafts Using Axisymmetric Solid Finite Elements With Matrix Reduction   R. W. Stephenson and K. E. Rouch   141   
ASME Biennial  1989  The Performance of the Runge-Kutta Method in the Context of Mechanism Systems With Discontinuities   J. M. B. Brown, K. Soorig, W. K. D. Borthwick, M. V. Gandhi, and B. S. Thompson   149   
ASME Biennial  1989  Modeling of Rotor-Foundation Systems Using Frequency-Response Functions in a Finite Element Approach   K. E. Rouch, T. H. McMains, and R. W. Stephenson   157   
ASME Biennial  1989  Reduced Order Rotor Modeling Combining Theoretical and Experimental Data   L F. Santos and Id. I. Weber   167   
ASME Biennial  1989  Transient Response of a Large Turbocharger Rotor   G. M. Chapman and J. B. Turnbull   173   
ASME Biennial  1989  A New Method for Transient Dynamic Analysis of Rotors Using Successive Merging and Condensation Techniques   S. Ratan and J. Rodriguez   181   
ASME Biennial  1989  A Wave Propagation for the Analysis of Transient Torsional Vibrations Due to Start-Up of a Rotor Machine   R. Bogacz, T. Szolc, and H. Irretier   187   
ASME Biennial  1989  Transient Vibration of an Asymmetric Rotor System Through Critical Speed   Z. C. Fang artd Z. H. Luo   191   
ASME Biennial  1989  Post-Stability (Limit Cycle) Operation in Terms of Bearings Alignment   Z. A. Parszewski and K. Krynicki   199   
ASME Biennial  1989  A Generalized Approach to the Buckling Stability of Rotor Systems   V. Arun, S. Jayaram, and L. D. Mitchell   205   
ASME Biennial  1989  Stability of an internally Damped Timoshenko Rotor Under Dynamic Axial Loads   S. K. Sinha   213   
ASME Biennial  1989  Stability Behavior of Geared Rotor Systems Regarding Torsional Lateral Coupling   A. Zuerbes, T. Neumer, A. Klimmek, P. Schwibinger, and R. Nordmann   217   
ASME Biennial  1989  Stability Analysis of Force Coupled Motion in Helical Geared Rotor Systems   S. V. Neriya, R. B. Bhat, and T. S. Sankar   225   
ASME Biennial  1989  Detection of Developing Bearing Failures by Means of Vibration   Z. Reif and M. S. Lai   231   
ASME Biennial  1989  Experimental Investigation of Cavitation Effects on the Squeeze Films Force Coefficients   F. Y. Zeidan and J. M. Vance   237   
ASME Biennial  1989  Vibration Control of a Translating String Coupled to Hydrodynamic Bearings   C. A. Tan, B. Yang, and C. D. Mote, Jr.   243   
ASME Biennial  1989  Experimental Determination of tile Journal Bearing Oil Film Coefficients by the Method of Selective Vibration Orbits   K. Brockwell and W. Dmochowski   251   
ASME Biennial  1989  Variable Impedance Hydrodynamic Journal Bearings for Controlling Flexible Rotor Vibrations   M. J. Goodwin, T. Boroomand, and C. J. Hooke   261   
ASME Biennial  1989  The Role of Bearing Support Stiffness Anisotropy in Suppression of Rotordynamic Instability   F. Ehrich   269   
ASME Biennial  1989  The Elastodynamic Response of a Slider-Crank Mechanism With Clearance in the Gudgeon-Pin Bearing: A Theoretical and Experimental Investigation   K. Soong and B. S. Thompson   275   
ASME Biennial  1989  Rotor-Bearing Asymptotic Response for a Frequency Sweep Test   A. El Hafidi and G. Lallement   285   
ASME Biennial  1989  Prediction of Steady State Response of Flexible Rotor Systems With Nonlinear Supports   T. N. Shiau and A. N. Jean   293   
ASME Biennial  1989  Free Vibration Analysis of Continuous Shaft on Elastic Bearings by Timoshenko Beam Theory   Y.-S. He and T. C. Huang   301   
ASME Biennial  1989  Influence of Active Magnetic Bearing Sensor Location on the Calculated Critical Speeds of Turbomachinery   R. G. Kirk, J. Keesee, D. Ohanehi, and F. Pinckney   309   
ASME Biennial  1989  Preliminary Experiments of Eddy Current Magnetic Bearing Performance   P. McLaren, L. Ting, E. Shea, K. Connor, and J. Tichy   317   
ASME Biennial  1989  Test of an Active Magnetic Bearing in Liquid Nitrogen   K. W. Lang   321   
ASME Biennial  1989  Active Vibration Control for Flexible Rotor by Optimal Direct-Output Feedback Control   K. Nonami, E. DiRusso, and D. P. Fleming   327   
ASME Biennial  1989  A Programmable Electromagnetic Bearing for Vibration Control of a Flexible Shaft   C. D. Bradfield, J. B. Roberts, and S. Karunendiran   335   
ASME Biennial  1989  Analysis, Design, and Testing of a Magnetic Bearing for a Centrifuge   R. B. Zmood, D. K. Artand, and J. A. Kirk   345   
ASME Biennial  1989  An Active Optimal Control Strategy of Rotor Vibrations Using External Forces   W. Zhu, L Castelazo, and H. D. Nelson   351   
ASME Biennial  1989  Cross Feedback Stabilization of the Digitally Controlled Magnetic Bearing   Y. Okada, B. Nagai, and T. Shimane   361   
ASME Biennial  1989  Test and Theory for Piezoelectric Actuator-Active Vibration Control of Rotating Machinery   A. B. Palazzolo, R. R. Lin, A. F. Kascak, J. Montague, and R. M. Alexander   367   
ASME Biennial  1989  A Method of Rotor Vibration Control Via Microprocessor   Z. Gosiewski   375   
ASME Biennial  1989  Spray Automated Balancing of Rotors: How Process Parameters Influence Performance   A. J. Smalley, FI. M. Baldwin, D. P. Fleming, and J. S. Yuhas   381   
ASME Biennial  1989  A Method for Using Transfer Matrix Methods for Balancing Flexible Rotors   F. H. Speckhart and J. A. Euler   389   
ASME Biennial  1989  A Study of Whole Machine Balancing Technique for Overhung Centrifuge With Flexible Supports   Z. Baotang, T. S. Sankar, V. Kamala, and H. Shizheng   395   
ASME Biennial  1989  On-Line Thermal Balancing Technique for a Large Turbo-Generator   M. Zumbach, G. Schweitzer, and K. Schoellhorn   403   
ASME Biennial  1989  A New Balance Method for Flexible Rotors With Asymmetric Principal Stiffnesses   X. Songbo, W. Xinghua, W. Guangming, P. Yucai, L. Rongqiang, and X. Shichang   411   
ASME Biennial  1989  Experimental and Numerical Analysis of Read/Write Head Suspension Dynamics for High Performance Floppy Drive Systems  G.M. Frees and D.K. Miu  1, vol 2   
ASME Biennial  1989  Coupled Vibratrion of Cracked Shafts  C.A. Papadopoulos and A.D.Dimarogonas  7, vol 2   
ASME Biennial  1989  Resonance Frequency Prediction of Automotive Serpentine Belt Drive Systems by Computer Modelling  R.C.S. Gaspar and LE.Hawker  13, vol 2   
ASME Biennial  1989  Actuator Design for Rotor Control  H.Ulbrich and J.Althaus  17, vol 2   
ASME Biennial  1989  Analysis of Non-Repeatable Radial Vibration of Magnetic Disk Spindles  K. Ono, N. Saiki,Y. Sanada, and A. Kumano  23, vol 2   
ASME Biennial  1989  Dynamic Simulation for Predicting Surface Roughness in Turning  D. Y.Jang and A. Seireg  31, vol 2   
ASME Biennial  1989  Modeling and Sensitivity Studies of the Feed drive System of a CNC lathe Driven by a DC Motor  M.G. Mehrabi and A. Hemami  37, vol 2   
ASME Biennial  1989  Regenerative Chatter Vibration of Cut-Off Type lathe Tools  E Marui, M. Hashimoto, and S. Kato  45, vol 2   
ASME Biennial  1989  Chatter Growth Analysis by the Extended Interpretation of the Theoretical Stability Chart  K. Jemielniak and A. Widota  51, vol 2   
ASME Biennial  1989  Modeling and Prediction of Dynamic Stability of Milling Machines  Ting Xian Zhang and Bao Shun Liu  57, vol 2   
ASME Biennial  1989  Modeling and Finite Element Analysis of Drill Bit Vibrations  O. Tekinalp and A. G. Ulsoy  61, vol 2   
ASME Biennial  1989  Enhancement of Dynamic Quality of a Machine Tool Using Frequency Response Optimization Method  E.I. Rivin and W.D'Ambrogio  69, vol 2   
ASME Biennial  1989  Chatter Suppression by Using Piezoelectric Active Damper  T. Matsubara, H. Yamamoto, and H.Mizumoto  79, vol 2   
ASME Biennial  1989  A Modification of Machine Tool Dynamical Properties Using Vibration Absorbers  K. Marchelek, S. Berczynski, and A. Witek.  85, vol 2   
ASME Biennial  1989  The Application of Component Mode Synthesis Techniques to the Dynamic Analysis of the Machine Tool Spindle Systems  Yuan Bijun  91, vol 2   
ASME Biennial  1989  The SSME HPFTP Wavy Interstage Seal: Part I - Seal Analysis  J.K. Scharrer and D.J. Nunez  95, vol 2   
ASME Biennial  1989  The SSME HPFTP Wavy Interstage Seal: Part II - Rotordynamic Analysis  B. T. Murphy, J. K. Scharrer, and L. A. Hawkins  101, vol 2   
ASME Biennial  1989  Calculation of Rotordynamic Coefficients for Labyrinth Seals Using a Three Dimensional Finite Difference Method  P. Weiser and R. Nordmann  109, vol 2   
ASME Biennial  1989  Calculation of Velocity and Pressure Fields in Labyrinth Seals of Pumps  F. Banquet  115, vol 2   
ASME Biennial  1989  Study on Self-Excited Vibration Caused by Steam Fluid Force in Labyrinth Seals  Huang Xiuzhu, Zhang Xueyan, and Zhang Youzhu  123, vol 2   
ASME Biennial  1989  Advanced Analysis of Multi-Ring Liquid Seals  S.W. Reedy and R.G. Kirk  129, vol 2   
ASME Biennial  1989  Calculations of Dynamic Forces in Liquid Annular Seal  T. Iwatsubo, T. Matsumoto, and Y. Tsujimoto  135, vol 2   
ASME Biennial  1989  Experimental Study of Dynamic Fluid Forces and Moments for a Long Annular Seal  Y. Kanemori and T. Iwatsubo  141, vol 2   
ASME Biennial  1989  Unbalance Response of a Jeffcott Rotor Incorporating Long Squeeze Film Dampers  A. El-Shafei  149, vol 2   
ASME Biennial  1989  Numerical and Experimental Study of a Finite Submerged Squeeze Film Damper  I. Kinsale and J. Tichy  159, vol 2   
ASME Biennial  1989  Identification of Squeeze-Film Bearing Dynamics Using a Recursive, Frequency-Domain Filter  R. Stanway, T. K. Tee, and J. E. Mottershead  167, vol 2   
ASME Biennial  1989  Prediction of the Performance of Cavitated Squeeze-Film Dampers  C. R. Burrows, N. C. Kucuk, and M. N. Sahinkaya   177, vol 2   
ASME Biennial  1989  Friction Damping of Circular Motion  J.H. Griffin and C-H. Menq  187, vol 2   
ASME Biennial  1989  A Study of the Preview Dynamic Damper  N. Tanaka and Y. Kikushima  195, vol 2   
ASME Biennial  1989  Concepts and Solutions of Damping Description in Materials and Members  L Gaul  205, vol 2   
ASME Biennial  1989  Dynamic Reanalysis of Weakly Non-Proportionally Damped Gyroscopic Systems  Zhao-Chang Zheng and YongHu  215, vol 2   
ASME Biennial  1989  A Decentralized Noncollocated Active Vibration Control Algorithm  C.J. Maday and N.H. Johnson  223, vol 2   
ASME Biennial  1989  Smart Structures Incorporating Electro-Rheological Fluids for Vibration-Control and Active Damping Applications: An Experimental Investigation  S. B. Choi, B. S. Thompson, and M. V. Gandhi  229, vol 2   
ASME Biennial  1989  Experimental Evaluation of Wide Band Active Vibration Controllers  A. V. Metcaffe and J. S. Burdess  237, vol 2   
ASME Biennial  1989  Modal Control of a Flexible Beam With Multiple Sensors and Actuators  P. K. Raju and S.P.Sun  245, vol 2   
ASME Biennial  1989  Vibration Control of the Elastodynamic Response of High-Speed Flexible Linkage Mechanisms  C.K. Sung and Y.C. Chen  253, vol 2   
ASME Biennial  1989  Viscoelastic Circular Plate Wave Guide Absorber  C.D. Hettema,Y.S. Shin, K.S. Kim  263, vol 2   
ASME Biennial  1989  An Active Dynamic Vibration Absorber for Multi-Degree-of-Freedom Systems  H. Nishimura, K. Yoshida, and T. Shimogo  275, vol 2   
ASME Biennial  1989  Application of Clearance Viscous Damper  S. Sathikh and S. Ganapathy  283, vol 2   
ASME Biennial  1989  Transfer Function Method for Active Control Design of Structure Constrained by Frequency  D.Y. Chen,Z.W. Hu, and F.Y. Fan  289, vol 2   
ASME Biennial  1989  Low Frequency Vibration Isolation Technology for Microgravity Space Experiments  C.M. Grodsinsky and G. V. Brown  295, vol 2   
ASME Biennial  1989  Active Vibration Isolation For Micro-Displacement Feedback Control  H. S. Tzou  303, vol 2   
ASME Biennial  1989  Advanced Electronics Transport Module Designed for Military Environment  D. Shimansky  311, vol 2   
ASME Biennial  1989  Adaptive Control for Semi-Active Isolators  S. Bellizzi and R. Bouc  317, vol 2   
ASME Biennial  1989  The Use of Canonical Correlation Analysis in Component Model Reduction  R.E. Skelton and D. Da  325, vol 2   
ASME Biennial  1989  Dynamics and Control of Tethered Satellite Systems: A Brief Review  A.K. Misra and V.J. Modi  333, vol 2   
ASME Biennial  1989  An Approach to Dynamics and Control of a Class of Interconnected Rigid/Flexible Orbiting Bodies  Y. Morita and V.J. Modi  347, vol 2   
ASME Biennial  1989  Generic Model Laboratory Tests for Large Flexible Structure Control  T. Lange  355, vol 2   
ASME Biennial  1989  Effects of Flexibility on the Attitude Stability of Spinning Spacecraft  B.N. Agrawal  363, vol 2   
ASME Biennial  1989  Some Definitions of Degree of Controllability (Observability) for Discrete-Time Systems and Their Applications  X. Guangqian and P.M. Bainum  369, vol 2