Search form for published papers in conferences related to rotordynamics.

Provided by Rotating Machinery Analysis, Inc.

Return to www.rotordynamics.org

List of conferences in the data base.

Enter search criteria
Conferences
Paper Title:
Paper Author:
From year:
To year:
Records per page:
Items found: 549 
After performing a search, to obtain a hardcopy of an article or entire proceeding try clicking on the link in the first column, which shows the name of the conference sponsor.
Papers
Conference Year Paper Title Paper Author Page Number Other
IGTI  1996  2MW Class High Efficiency Gas Turbine IM270 For Co-generation Plants  Hideo Kobayashi, Syougo Tugumi, Yoshio Yonezawa, Riuzou Imamura, Ishikawajima-Harima Heavy Industries Co., Ltd., Tokyo, Japan    96-GT-001 
IGTI  1996  Microwave Blade Tip Clearance Measurement System  Richard Grzybowski, George Foyt, United Technologies Research Center, East Hartford, CT, USA; William Atkinson, United Technologies Pratt & Whitney, West Palm Beach, FL, USA; Hartwig Knoell, Daimler-Benz Aerospace MTU, Munich, Germany; Josef Wenger, Daiml    96-GT-002 
IGTI  1996  Application of Analytical Redundancy to the Detection of Sensor Faults on a Turbofan Engine  Ronald W. Kelly, DRA Pyestock, Farnborough Hants, United Kingdom    96-GT-003 
IGTI  1996  A Novel Proximity Probe Unaffected by Shaft Electromagnetic Properties  Michael M. Hastings; Henrik B. Jensen, Bruel & Kjaer A/S, Naerum, Denmark    96-GT-004 
IGTI  1996  Technology Development Programs for the Advanced Turbine Systems Engine  Ihor S. Diakunchak, Ronald L. Bannister, David J. Huber, D. Frank Roan, Westinghouse Electric Corporation, Orlando, FL, USA    96-GT-005 
IGTI  1996  Government/Industry Partnership: A Revolutionary Approach in Global Leadership of Advanced Gas Turbines  Sy A. Ali, Allison Engine Company, Indianapolis, IN, USA; Charles M. Zeh, U.S. Department of Energy, Morgantown, WV, USA    96-GT-006 
IGTI  1996  Operation of Combustion Turbines on Alternate Fuel Oils  K. W. Johnson, Westinghouse Electric Corporation, Orlando, FL, USA    96-GT-007 
IGTI  1996  Gas Turbine Firing Medium BTU Gas From Gasification Plant  Piero Zanello, Andrea Tasseli, Fiat Avio, Turin, Italy    96-GT-008 
IGTI  1996  A Test Rig for the Realization of Water Recovery in a Steam-Injected Gas Turbine  Wen Xueyou, Zou Jiguo, Fu Zheng, Yu Shikang, Li Lingbo, Harbin Marine Boiler & Turbine Research Institute, Harbin, China    96-GT-009 
IGTI  1996  The Reduction of Low Frequency Gas Turbine Exhaust Noise - A Case Study  William C. Lucas, ABB Power Generation Inc., Midlothian, VA, USA; George F. Hessler, Hessler Associates, Inc., Cabin John, MD, USA    96-GT-010 
IGTI  1996  H Gas Turbine Combined Cycle Technology & Development Status  James C. Corman, General Electric Company, Schenectady, NY, USA    96-GT-011 
IGTI  1996  Vibration Analysis of Rotor - Coupling - Bearing System with Misaligned Shafts  A. Sreenivasa Rao, A.S. Sekhar, Indian Institute of Technology, Kharagpur, India    96-GT-012 
IGTI  1996  GE MS7001 Gas Turbine Advanced Technology Uprate  Michael A. Cocca, James Van Wormer, GE Power Systems, Schenectady, NY , USA; Arthur Stappenbeck, Cogen Technologies, East Brunswick, NJ, USA    96-GT-013 
IGTI  1996  Designing for High Reliability and Availability in New Combustion Turbines  G. McQuiggan, Westinghouse Electric Corporation, Orlando, FL, USA    96-GT-014 
IGTI  1996  Design and Development of a Landfill Gas Combustion System for the Typhoon Gas Turbine  David J. Ecob, Michael B. Boyns, European Gas Turbines Ltd., Lincoln, United Kingdom; A. Allen Hunt, Browning Ferris Gas Services Inc., Houston, TX, USA; Steve Walsh, Ken McClave, Aero & Industrial Technology Ltd., Burnley, United Kingdom    96-GT-015 
IGTI  1996  The Advanced Cooling Technology for the 1500 °C Class Gas Turbines - The Steam Cooled Vanes and the Air Cooled Blades  H. Nomoto, A. Koga, S. Shibuya, S. Ito, Toshiba Corporation, Yokohama Japan; Y. Fukuyama, F. Otomo, Toshiba Corporation, Kawasaki, Japan; M. Sato, Y. Kobayashi, H. Matsuzaki, Tohuku Electric Power Co., Inc., Sendai, Japan    96-GT-016 
IGTI  1996  Low Speed Balancing of Flexible Rotors Considering Influences of Running Speeds  S. -G. Tan, X.-X. Wang, Zhejiang Unversity, Hangzhou, People's Republic of China    96-GT-017 
IGTI  1996  Investigation of Hydrodynamic Forces on Rotating and Whirling Centrifugal Pump Impellers  R. Fongang, University of Kaiserslautern, Kaiserslautern, Federal Republic of Germany; J. Colding-Jørgensen, Ødegaard & Danneskiold-Samsøe AS, Copenhagen, Denmark; R.N. Nordmann, Technical University of Darmstadt, Darmstadt, Federal Republic of Germany    96-GT-018 
IGTI  1996  An Improved Epicyclic Gearbox for Reduced and Controllable Sub-Synchronous Vibrations in Gas Turbogenerator Applications  A.K. Rakhit, Solar Turbines Incorporated, San Diego, CA, USA    96-GT-019 
IGTI  1996  Repowering Fossil Steam Power Plants with Combustion Turbine-Based Technologies  Stanley Pace, Electric Power Research Institute, Palo Alto, CA, USA; Arden Walters, Advanced Energy Research Inc., Delray Beach, FL, USA    96-GT-020 
IGTI  1996  Application of Rainbow Thermometry to the Study of Fuel Droplet Heat-Up and Evaporation Characteristics  Subramanian V. Sankar, Dale H. Buermann, William D. Bachalo, Aerometrics, Inc., Sunnyvale, CA, USA    96-GT-021 
IGTI  1996  Free Vibration of a Rotating Disk-Blade Coupled System with Shrouds  Yukinori Kobayashi, Gen Yamada, Hokkaido University, Sapporo, Japan; Takahiro Tomioka, Railway Technical Research Institute, Kokubunji, Japan    96-GT-022 
IGTI  1996  Unbalance Response of a Multi-Mode Rotor Supported on Short Squeeze Film Dampers  R. Youssef, A. El-Shafei, Cairo University, Giza, Egypt    96-GT-023 
IGTI  1996  Blade Vibrations of a High Speed Compressor Blisk-Rotor-Numerical Resonance Tuning and Optical Measurements  J. Frischbier, G. Schulze, M. Zielinski, G. Ziller, MTU München, Germany; C. Blaha, D.K. Hennecke, Darmstadt Technical University, Darmstadt, Germany    96-GT-024 
IGTI  1996  The Transient Torsional Vibration Behaviour of a Turbine-Generator System Under Short Circuit Excitation  Dennis S.H. Chan, Kværner Engineering A.S., Oslo, Norway    96-GT-025 
IGTI  1996  Numerical Investigation of the Clocking Effects in a Multistage Turbine  Frank Eulitz, Karl Engel, Hermann Gebing, DLR, German Aerospace Research Establishment, Cologne, Germany    96-GT-026 
IGTI  1996  Dry Low NOx Combustion Systems for GE Heavy-Duty Gas Turbines  L. Berkley Davis, General Electric Corporation., Schenectady, NY, USA    96-GT-027 
IGTI  1996  Measurements of Time-Varying Jet Isopleths Using Dual Light Sheet PLIF  Robert P. Campbell, General Electric CR&D, Schenectady, NY, USA; M. David Checkel, David J. Wilson, University of Alberta, Edmonton, Alberta, Canada    96-GT-028 
IGTI  1996  Wake Mixing in Axial Flow Compressors  John J. Adamczyk, NASA Lewis Research Center, Cleveland, OH, USA    96-GT-029 
IGTI  1996  Computation of Internal/Rotating Flows Using Recent CFD Techniques  Meng-Sing Liou, Kai-Hsiung Kao, Kumud Ajmani, NASA Lewis Research Center, Cleveland, OH, USA    96-GT-030 
IGTI  1996  Comparison of a TVD-Upwind Scheme and a Central Difference Scheme for Navier-Stokes Turbine Stage Flow Calculation  Markus Raif, Jürgen F. Mayer, Heinz Stetter, University of Stuttgart, Stuttgart, Germany    96-GT-031 
IGTI  1996  Simple Instrumentation Rake Designs for Gas Turbine Engine Testing  Peter D. Smout, Steven C. Cook, Rolls-Royce plc., Derby, United Kingdom    96-GT-032 
IGTI  1996  The Effects of Engine Degradation on Creep - Using a Transient Engine Simulation  P. Darrin Little, Canadian Forces Base Trenton, Astra, Ontario, Canada; Riti Singh, Cranfield University, Cranfield, Bedford, United Kingdom    96-GT-033 
IGTI  1996  Integrated Predictive Diagnostics: An Expanded View  Robert J. Hansen, David L. Hall, G. William Nickerson, Shashi Phoha, The Pennsylvania State University, State College, PA, USA    96-GT-034 
IGTI  1996  The Negative Information Problem in Mechanical Diagnostics  David L. Hall, Robert J. Hansen, Derek C. Lang, The Pennsylvania State University, State College, PA, USA    96-GT-035 
IGTI  1996  Status of the Automotive Ceramic Gas Turbine Development Program - Year Five Progress  Tsubura Nisiyama, Norio Nakazawa, Masafumi Sasaki, Masumi Iwai, Haruo Katagiri, Japan Automotive Research Institiute, Incorporated, Tsukuba, Ibaraki, Japan; Noritoshi Handa, Petroleum Energy Center, Minato-ku, Tokyo, Japan    96-GT-036 
IGTI  1996  Study of Radial Tip Clearance Effects in a Low-Speed Axial Compressor Rotor  I.G. Nikolaou, K.C. Giannakoglou, K.D. Papailiou, National Technial University of Athens, Athens, Greece    96-GT-037 
IGTI  1996  Quasi-Three-Dimensional and Three-Dimensional Flow Calculation in a Francis Turbine  Manfred J. Sallaberger, University of Technology Graz, Graz, Austria    96-GT-038 
IGTI  1996  Three-Dimensional Inverse Method for Turbomachinery Blading Design  Alain Demeulenaere, Rene Van den Braembussche, von Karman Institute for Fluid Dynamics, Rhode-Saint-Genese, Belgium    96-GT-039 
IGTI  1996  Quasi-Three-Dimensional Simplified Method for a Transonic Compressor Rotor  V. Tsamourtzis, A. Bölcs, Laboratoire de Thermique Appliquée et de Turbomachines (LTT), Swiss Federal Institute of Technology, Lausanne, Switzerland    96-GT-040 
IGTI  1996  Assessment of a Wave Rotor Topped Demonstrator Gas Turbine Engine Concept  Philip H. Snyder, Raymond E. Fish, Allison Engine Company, Rolls-Royce Aerospace Group, Indianapolis, IN, USA    96-GT-041 
IGTI  1996  Detailed Velocity and Turbulence Measurements of the Profile Boundary Layer in a Large Scale Turbine Cascade  Marina Ubaldi, Pietro Zunino, Ugo Campora, Andrea Ghiglione, Istituto di Macchine e Sistemi Energetici, Universitá di Genova, Genova, Italy    96-GT-042 
IGTI  1996  Development of a Small Low NOx Combustor with a Staging System for an Aircraft Engine (Part 1)  Masayoshi Kobayashi, Masashi Arai, Toshiyuki Kuyama, Kawasaki Heavy Industries Limited, Kobe, Japan    96-GT-043 
IGTI  1996  Techniques to Characterize the Thermal-Oxidation Stability of Jet Fuels and the Effects of Additives  V. Vilimpoc, B. Sarka, W.L. Weaver, Systems Research Laboratories, Dayton, OH, USA; J.R. Gord, S. Anderson, Wright Laboratory, Wright-Patterson Air Force Base, OH, USA    96-GT-044 
IGTI  1996  Development of an Improved Hybrid Burner - Initial Operating Experience in a Gas Turbine  Bernd Prade, Holger Streb, Peter Berenbrink, Bernhard Schetter, SIEMENS AG, Power Generation Group KWU, Mülheim, Germany; Gottfried Pyka, DEF, Dresden Elektrizität und Fernwärme GmbH, Dresden, Germany    96-GT-045 
IGTI  1996  Deposit Formation from No. 2 Distillate at Gas Turbine Conditions  Anthony J. Dean, Jean E. Bradt, John F. Ackerman, General Electric Research and Development Center, Schenectady, NY, USA    96-GT-046 
IGTI  1996  Combustion of Liquid Fuels in the Well Stirred Reactor  J. Zelina, Allied Signal Engines, Phoenix, AZ, USA; J. W. Blust, D.R. Ballal, University of Dayton, Dayton, OH, USA    96-GT-047 
IGTI  1996  Numerical and Experimental Investigation of a Rich Quench Lean Combustor Sector  Johannes W. Koopman, Peter Griebel, Christoph Hassa, Institute for Propulsion Technology, Cologne, Germany    96-GT-048 
IGTI  1996  An Advanced Development of a Second-Generation Dry, Low-NOx Combustor for 1.5MW Gas Turbine  Shin-ichi Kajita, Shin-ichi Ohga, Masahiro Ogata, Satoru Itaka, Jun-ichi Kitajima, Takeshi Kimura, Atsushi Okuto, Kawasaki Heavy Industries, LTD., Akashi, Japan    96-GT-049 
IGTI  1996  Excited Turbulent Reacting Flows in a Chamber with Gaseous Fuels Injecting through Porous Walls  Tong-Miin Liou, Po-Wen Hwang, Wan-Yih Lien, National Tsing Hua University, Hsinchu, Taiwan, R.O.C.    96-GT-050 
IGTI  1996  NOx Control in Black Liquor Fuel Gas Combined Cycles  Rebecca N. Sliger, Marcel D. Berz, John C. Kramlich, Philip C. Malte, University of Washington, Seattle, WA, USA    96-GT-051 
IGTI  1996  Experiments with a Gas Turbine Model Combustor Firing Blast- Furnace Gas  Yansong Liu, ABB Turbo Systems Ltd., Baden, Switzerland; Jürg Schmidli, ABB Power Generation Ltd., Baden, Switzerland    96-GT-052 
IGTI  1996  Development of a Dry Low NOx Combustor for 2MW Class Gas Turbine  J. Hosoi, T. Watanabe, H. Toh, Ishikawajima-Harima Heavy Industries Co., Ltd., Tokyo, Japan; M. Mori, H. Sato, A. Ishizuka, Tokyo Gas Co., Ltd., Tokyo, Japan    96-GT-053 
IGTI  1996  Dynamic Response of Fuel Nozzles for Liquid-Fueled Gas Turbine Combustors  Mounir Ibrahim, Cleveland State University, Cleveland, OH, USA; Terry Sanders, Douglas Darling, NASA Lewis Research Center, Cleveland, OH, USA; Michelle Zaller, NYMA, Inc., Brook Park, OH, USA    96-GT-054 
IGTI  1996  The Generation of 3D, Stretched, Viscous Unstructured Meshes for Arbitrary Domains  W.N. Dawes, Cambridge University, Cambridge, UK    96-GT-055 
IGTI  1996  Indicators of Incipient Surge for Three Turbofan Engines Using Standard Equipment and Instrumentation  Adam J. Baran, Michael G. Dunn, Calspan Advanced Technology Center, Buffalo, NY, USA    96-GT-056 
IGTI  1996  Time-Frequency Analysis of Compressor Rotating Stall by Means of Wavelet Transform  Shengfang Liao, Jingyi Chen, Chinese Academy of Sciences, Beijing, China    96-GT-057 
IGTI  1996  BladeCAD: An Interactive Geometric Design Tool for Turbomachinery Blades  Perry L. Miller IV, James H. Oliver, Iowa State University, Ames, IA, USA; David P. Miller, Daniel L. Tweedt, NASA Lewis Research Center, Cleveland, OH, USA    96-GT-058 
IGTI  1996  Design and Development of a Two Stage Transonic Axial Flow Compressor  Katsushi Nagai, Kazuaki Ikesawa, Takao Sugimoto, Toshinao Tanaka, Hiroshi Umino, Takeshi Ryuguji, Kawasaki Heavy Industries, Ltd., Akashi, Japan    96-GT-059 
IGTI  1996  The Influence of Inlet Swirl on the Flow Within an Annular S-Shaped Duct  D.W. Bailey, J.F. Carrotte, Loughborough University of Technology, Loughborough, Leics, United Kingdom    96-GT-060 
IGTI  1996  A Study of the Behaviour of Flow in a Diagonal-Flow Turbomachine  Arjun Sarathi Ray, Development Consultants Ltd., Calcutta, India    96-GT-061 
IGTI  1996  Compressor Off-Design Performance Prediction Using an Endwall Model  John Dunham, Defence Research Agency, Pyestock, Farnborough, Hampshire, United Kingdom    96-GT-062 
IGTI  1996  The Application of a Computer-Aided Design Technique to the Conceptual Design of Turbochargers - Part A Centrifugal Compressor Design and Turbine Matching  A. Whitfield, Abu Hasan Abdullah, University of Bath, Bath, U.K.    96-GT-063 
IGTI  1996  The Application of a Computer-Aided Design Technique to the Conceptual Design of Turbochargers - Part B Radial Turbine Design  A. Whitfield, Abu Hasan Abdullah, University of Bath, Bath, U.K.    96-GT-064 
IGTI  1996  Flow Development in Radial Turbine Rotors  Nicholas C. Baines, Concepts ETI, Inc., Kidlington, Oxon, UK    96-GT-065 
IGTI  1996  Numerical Calculations of a Turbine Volute Using a 3-D Navier-Stokes Solver  R.F. Martinez-Botas, K.R. Pullen, F. Shi, Imperial College of Science, Technology and Medicine, London, England    96-GT-066 
IGTI  1996  Numerical Simulation of Secondary Flow in Gas Turbine Disc Cavities, Including Conjugate Heat Transfer  Y.-H. Ho, M.M Athavale, CFD Research Corporation, Huntsville, AL, USA; J.M. Forry, Allison Engine Co., Rolls Royce Aerospace Group, Indianapolis, IN, USA; R.C. Hendricks, B.M. Steinetz, NASA Lewis Research Center, Cleveland, OH, USA    96-GT-067 
IGTI  1996  An Implicit Algorithm for Stator-Rotor Interaction Analysis  V. Michelassi, P. Adami, F. Martelli, University of Florence, Florence, Italy    96-GT-068 
IGTI  1996  Simulation of 3D-Unsteady Stator/Rotor Interaction in Turbomachinery Stages of Arbitrary Pitch Ratio  Alexander R. Jung, Jürgen F. Mayer, Heinz Stetter, University of Stuttgart, Stuttgart, Germany    96-GT-069 
IGTI  1996  Computation of Three-Dimensional Steady and Unsteady Flow Through a Compressor Stage  Y.-H. Ho, B. Lakshminarayana, The Pennsylvania State University, University Park, PA, USA    96-GT-070 
IGTI  1996  Navier-Stokes Simulation of the Flow Around a Leading Edge Film-Cooled Turbine Blade Including the Interior Cooling System and Comparison with Experimental Data  Dirk T. Vogel, Inst. f. Propulsion Technology, DLR, Cologne, Germany    96-GT-071 
IGTI  1996  Modelling of the Tip Clearance Losses in Axial Flow Machines  I.K. Nikolos, D.I. Douvikas, K.D. Papailiou, National Technical University of Athens, Athens, Greece    96-GT-072 
IGTI  1996  The Prediction of the Tip Clearance Vortex Circulation and its Induced Flow Field in Axial Flow Machines  I.K. Nikolos, D.I. Douvikas, K.D. Papailiou, National Technical University of Athens, Athens, Greece    96-GT-073 
IGTI  1996  The Chordwise Lean of Highly Loaded Turbine Blades  Wang Zhongqi, Han Wanjin, Harbin Institute of Technology, Harbin, People's Republic of China    96-GT-074 
IGTI  1996  Performance Benefits for Wave Rotor-Topped Gas Turbine Engines  Scott M. Jones, NASA Lewis Research Center, Cleveland, OH, USA; Gerard E. Welch, U.S. Army Research Laboratory, Cleveland, OH, USA    96-GT-075 
IGTI  1996  Coal/Biomass Fuels and the Gas Turbine: Utilization of Solid Fuels and their Derivatives  Mario DeCorso, Power Tech Associates, Inc., Media, PA, USA; Don Anson, Battelle, Columbus, OH, USA; Richard Newby, Westinghouse Electric Corporation, Pittsburgh, PA, USA; Richard Wenglarz, Allison Engine Co., Indianapolis, IN, USA; Ian Wright, Oak Ridge N    96-GT-076 
IGTI  1996  Externally Fired Evaporative Gas Turbine with a Condensing Heat Exchanger  Jinyue Yan, Lars Eidensten, Gunnar Svedberg, Royal Institute of Technology, Stockholm, Sweden    96-GT-077 
IGTI  1996  An Analysis of the Aeroelastic Behaviour of a Typical Fan-Blade with Emphasis on the Flutter Mechanism  J.G. Marshall, Aerothermal Methods, Rolls-Royce plc., Derby, United Kingdom; M. Imregun, Imperial College of Science, Technology & Medicine, London, United Kingdom    96-GT-078 
IGTI  1996  The Transfer Matrix-Component Mode Synthesis for Rotordynamic Analysis  Huang Taiping, Nanjing University of Aeronautics and Astronautics, Nanjing, P.R. China    96-GT-079 
IGTI  1996  Origin of Split Resonance and Backward Whirl in a Simple Rotor  Knox T. Millsaps, Curtis E. Vejvoda, Naval Postgraduate School, Monterey, CA, USA    96-GT-080 
IGTI  1996  Experimental Investigation of a Single Stage Axial Flow Compressor with Controlled Diffusion Airfoils  Pieper S., Schulte J., Hoynacki A., Gallus H.E., Institut für Strahlantriebe und Turboarbeitsmaschinen, RWTH Aachen, Federal Republic of Germany    96-GT-081 
IGTI  1996  Implementing New Uncertainty Guidelines and Standards in Turbine Testing  Hugh W. Coleman, University of Alabama in Huntsville, Huntsville, AL, USA; W. Glenn Steele, Mississippi State University, Mississippi State, MS, USA    96-GT-082 
IGTI  1996  The Blast Basket, A New Component Used in Testing Large, High Bypass Ratio, Fan Engines  Richard Adkins, Square One Consultants Ltd., Dorset, UK; Arsil Anas, GARUDA Maintenance Facilities, Jakarta, Indonesia    96-GT-083 
IGTI  1996  A Nonintrusive Rotor Blade Vibration Monitoring System  Henry Jones, Sverdrup Technology, Inc/AEDC Group, Arnold Air Force Base, TN, USA    96-GT-084 
IGTI  1996  Thrust Reverser Catchers Devices Which Enable Cyclic Testing Between Forward and Reverse Thrust  Richard C. Adkins, Square One Consultants Ltd, Dorset, England; Mike Sherwood, Rolls-Royce Plc, Derby, England    96-GT-085 
IGTI  1996  Empirical and Semi-empirical Correlation of Emissions Data from Modern Turbopropulsion Gas Turbine Engines  Allen M. Danis, Byron A. Pritchard, Hukam C. Mongia, GE Aircraft Engines, Cincinnati, OH, USA    96-GT-086 
IGTI  1996  Simultaneous Hot Desulfurization and Improved Filtration in Coal Utilization Processes  James F. Zievers, Parul Patel, Paul Eggerstedt, Industrial Filter & Pump Mfg. Co., Cicero, IL, USA; Elizabeth C. Zievers, Universal Porosics, Inc., La Grange, IL, USA    96-GT-087 
IGTI  1996  Development of Gas Turbine for Air-Blown Gasification  K. Wada, T. Sasada, Hitachi Works, Hitachi Ltd., Hitachi, Ibaraki, Japan; H. Hayashi, Engineering Research Association for IGC, Iwaki, Fukushima, Japan    96-GT-088 
IGTI  1996  Performance Modeling of Aeroderivative Steam-Injected Gas Turbines and Combined Cycles Fueled from Fixed or Fluid-bed Biomass Gasifiers  Eric D. Larson, Wendy E.M. Hughes, Princeton University, Princeton, NJ, USA    96-GT-089 
IGTI  1996  Adaptability of the Solar Advanced Turbine Systems to Biomass and Coal Derived Fuels  David J. White, Richard T. LeCren, Chaur S. Wen, Solar Turbines Incorporated, San Diego, CA, USA    96-GT-090 
IGTI  1996  An Assessment of Humid Air Turbines in Coal-Fired High Performance Power Systems  Julianne M. Klara, United States Department of Energy, Pittsburgh Energy Technology Center, Pittsburgh, PA, USA; Robert M. Enick, University of Pittsburgh, Pittsburgh, PA, USA; Scott M. Klara, Calgon Carbon Corporation, Pittsburgh, PA, USA, Lawrence E. Va    96-GT-091 
IGTI  1996  Externally Fired Combined Cycles (EFCC) - Part A: Thermodynamics and Technological Issues  Stefano Consonni, Ennio Macchi, Politechnico di Milano, Milan, Italy; Frencesco Farina, Ansaldo Ricerche, Genova, Italy    96-GT-092 
IGTI  1996  Externally Fired Combined Cycles (EFCC). Part B: Alternative Configurations and Cost Projections  Stefano Consonni, Ennio Macchi, Politecnico di Milano, Milan, Italy    96-GT-093 
IGTI  1996  Effect of Check Valve Dynamics on the Sizing of Recycle Systems for Centrifugal Compressors  K.K. Botros, Novacor Research & Technology Corporation, Calgary, Alberta, Canada; D.J. Richards, O. Roorda, NOVA Gas Transmission Ltd., Calgary, Alberta, Canada    96-GT-094 
IGTI  1996  A New Gas Compressor Product Development  Ronald P. Porter, Allison Engine Company, Indianapolis, IN, USA    96-GT-095 
IGTI  1996  Turbomachinery Diagnostic System: SNAM Cortemaggiore Compressor Station as a Typical Application  Paolo Pulicani, Nuovo Pignone s.p.a., Rome, Italy; Giuliano Zampieri, SNAM s.p.a., Milano, Italy    96-GT-096 
IGTI  1996  Analysis and Validation of Turbine Disc Cooling  John M. Hannis, John D. Maltson, Robert J. Corry, Nigel Johnson, European Gas Turbines, Lincoln, England    96-GT-097 
IGTI  1996  Study of Hot Streak Phenomena in Subsonic and Transonic Flows  Daniel J. Dorney, Western Michigan University, Kalamazoo, MI, USA; Douglas L. Sondak, United Technologies Research Center, East Hartford, CT, USA    96-GT-098 
IGTI  1996  Experimental Study of Tip Clearance Effects Under Transonic Flow Conditions  M. Wehner, A. Bölcs, Swiss Federal Institute of Technology, EPFL Lausanne, Switzerland; J. Bütikofer, ABB Power Generation Ltd., Baden, Switzerland    96-GT-099 
IGTI  1996  Transition Effects on Secondary Flows in a Turbine Cascade  H. Moore and D.G. Gregory-Smith, University of Durham, Durham, UK    96-GT-100 
IGTI  1996  Intelligent Pressure Measurement for Turbo Machinery Applications  Derek Greener, Scanivalve Corporation, Bristol, Great Britain    96-GT-101 
IGTI  1996  Radial Compressor Fault Identification Using Dynamic Measurement Data  N. Aretakis, K. Mathioudakis, National Technical University of Athens, Zograta, Athens, Greece    96-GT-102 
IGTI  1996  Processing of Circumferential Temperature Distributions for the Detection of Gas Turbine Burner Malfunctions  A. Tsalavoutas, K. Mathioudakis, National Technical University of Athens, Zograta, Athens, Greece; M.K. Smith, European Gas Turbines, Lincoln, England    96-GT-103 
IGTI  1996  A Simplified Scheme for Scheduling Multivariable Controllers and its Application to a Turbofan Engine  Sanjay Garg, NASA Lewis Research Center, Cleveland, OH, USA    96-GT-104 
IGTI  1996  Smart Structures and Fiber Optic Technology for 21st Century Control Applications  W.B. Spillman Jr., BF Goodrich Aerospace Aircraft Integrated Systems, Vergennes, VT, USA    96-GT-105 
IGTI  1996  SiC High Temperature Electronics for Next Generation Aircraft Controls Systems  John F. Perkins, Richard H. Hopkins, Charles D. Brandt, Anant K. Agarwal, Suresh Seshadri, Richard R. Siergiej, Westinghouse Science & Technology Center, Pittsburgh, PA, USA    96-GT-106 
IGTI  1996  Transition of a Technology Base for Advanced Aircraft Gas Turbine Control Systems  Michael E. McGlone, United Technologies Pratt & Whitney, W. Palm Beach, FL, USA    96-GT-107 
IGTI  1996  High Temperature Power Electronics for Gas Turbine Engine Applications  Richard R. Grzybowski, A. George Foyt, United Technologies Research Center, East Hartford, CT, USA    96-GT-108 
IGTI  1996  Friction Damping of Hollow Airfoils: Part I - Theoretical Development  J.H. Griffin, W-T. Wu, Carnegie Mellon University, Pittsburgh, PA, USA; Y. El-Aini, Pratt & Whitney, West Palm Beach, FL, USA    96-GT-109 
IGTI  1996  Friction Damping of Hollow Airfoils: Part II - Experimental Verification  Yehia M. El-Aini, Barry K. Benedict, Pratt & Whitney, West Palm Beach, FL, USA; Wen-Te Wu, Carnegie Mellon University, Pittsburgh, PA, USA    96-GT-110 
IGTI  1996  A Normalized Modal Eigenvalue Approach for Resolving Modal Interaction  Ming-Ta Yang, Jerry H. Griffin, Carnegie Mellon University, Pittsburgh, PA, USA    96-GT-111 
IGTI  1996  Modeling Sulfur Dioxide Capture in a Pulverized Coal Combustor  Rajesh B. Nair, Savas Yavuzkurt, The Pennsylvania State University, University Park, PA, USA    96-GT-112 
IGTI  1996  Three-Dimensional Flow Field Measurements in a Transonic Turbine Cascade  P.W. Giel, NYMA, Inc., Brook Park, OH, USA; D.R. Thurman, I. Lopez, R.J. Boyle, G.J. Van Fossen, T.A. Jett, W.P. Camperchioli, H. La, NASA Lewis Research Center, Cleveland, OH, USA    96-GT-113 
IGTI  1996  Calculation of Tip Clearance Effects in a Transonic Compressor Rotor  Rodrick V. Chima, NASA Lewis Research Center, Cleveland, OH, USA    96-GT-114 
IGTI  1996  A Numerical Investigation of the Startup Transient in a Wave Rotor  Daniel E. Paxson, NASA Lewis Research Center, Cleveland, OH, USA    96-GT-115 
IGTI  1996  A Numerical Investigation of Premixed Combustion in Wave Rotors  M. Razi Nalim, Daniel E. Paxson, NASA Lewis Research Center, Cleveland, OH, USA    96-GT-116 
IGTI  1996  An Experimental Determination of Losses in a 3-Port Wave Rotor  Jack Wilson, NYMA, Inc., Brook Park, OH, USA    96-GT-117 
IGTI  1996  Analysis of Hot Streak Effects on Turbine Rotor Heat Load  Tonghuo Shang, Pratt & Whitney, East Hartford, CT, USA; Alan H. Epstein, Massachusetts Institute of Technology, Cambridge, MA, USA    96-GT-118 
IGTI  1996  Development of a Low-Emission Combustor for a 100-kW Automotive Ceramic Gas Turbine  Masafumi Sasaki, Hirotaka Kumakura, Daishi Suzuki, Hiroyuki Ichikawa, Youichiro Ohkubo, Yuusaku Yoshida, Japan Automobile Research Institute, Incorporated, Tsukuba, Japan    96-GT-119 
IGTI  1996  Aerodynamically Induced Radial Forces in a Centrifugal Gas Compressor - Part 1: Experimental Measurement  Jeffrey J. Moore, Michael B. Flathers, Solar Turbines Incorporated, San Diego, CA, USA    96-GT-120 
IGTI  1996  Force Versus Current and Air Gap Calibration of a Double Acting Magnetic Thrust Bearing  D.O. Baun, R.L. Fittro, E.H. Maslen, University of Virginia, Charlottesville, VA, USA    96-GT-121 
IGTI  1996  The Acoustic Influence of Cell Depth on the Rotordynamic Characteristics of Smooth-Rotor/Honeycomb-Stator Annular Gas Seals  George F. Kleynhans, Dara W. Childs, Texas A&M University, College Station, TX, USA    96-GT-122 
IGTI  1996  PI Control of HSFDs for Active Control of Rotor-Bearing Systems  J.P. Hathout, A. El-Shafei, Cairo University, Giza, Egypt    96-GT-123 
IGTI  1996  A Linearized Unsteady Aerodynamic Analysis for Real Blade Supersonic Cascades  Matthew D. Montgomery, Joseph M. Verdon, United Technologies Research Center, East Hartford, CT, USA; Sanford Fleeter, Purdue University, West Lafayette, IN, USA    96-GT-124 
IGTI  1996  The Maximum Factor by Which Forced Vibration of Blades Can Increase Due to Mistuning  Denis S. Whitehead, Imperial College, London, England    96-GT-125 
IGTI  1996  Low NOx Premixed Combustion of MBtu Fuels in a Research Burner  K. Döbbeling, A. Eroglu, D. Winkler, T. Sattelmayer, ABB Corporate Research, Dättwil, Switzerland; W. Keppel, ABB Power Generation, Mannheim, Germany    96-GT-126 
IGTI  1996  Fuel Nozzle Aerodynamic Design Using CFD Analysis  D. Scott Crocker, Eric J. Fuller, Clifford E. Smith, CFD Research Corporation, Huntsville, AL USA    96-GT-127 
IGTI  1996  Characterization of NOx, N2O, and CO for Lean-Premixed Combustion in a High-Pressure Jet-Stirred Reactor  Robert C. Steele, Jon H. Tonouchi, David G. Nicol, David C. Horning, Philip C. Malte, David T. Pratt, University of Washington, Seattle, WA, USA    96-GT-128 
IGTI  1996  NOx Measurements for Combustor with Acoustically Controlled Primary Zone  Peter J. Vermeulen, Venkataramanayya Ramesh, The University of Calgary, Calgary, Alberta, Canada    96-GT-129 
IGTI  1996  Catalytic Combustion of Natural Gas Over Supported Platinum: Flow Reactor Experiments and Detailed Numerical Modeling  Tami C. Bond, Ryan A. Noguchi, Chen-Pang Chou, Rajiv K. Mongia, Jyh-Yuan Chen, Robert W. Dibble, University of California at Berkeley, Berkeley, CA, USA    96-GT-130 
IGTI  1996  Structure of Airblast Sprays Under High Ambient Pressure Conditions  Q P Zheng, A K Jasuja, A H Lefebvre, Cranfield University, Cranfield, Bedford, England    96-GT-131 
IGTI  1996  The Effects of Dissolved Oxygen Concentration, Fractional Oxygen Consumption, and Additives on JP-8 Thermal Stability  J.S. Ervin, T.F. Williams, S.P. Heneghan, S. Zabarnick, University of Dayton, Dayton, OH, USA    96-GT-132 
IGTI  1996  Numerical Prediction of the Dynamic Behaviour of Turbulent Diffusion Flames  Dieter Bohn, Gregor Deutsch, Uwe Krüger, Aachen University of Technology, Aachen, Germany    96-GT-133 
IGTI  1996  Development of a Dry Ultra Low NOx Double Swirler Staged Gas Turbine Combustor  Hiroshi Sato, Masaaki Mori, Tokyo Gas Co., Ltd., Tokyo, Japan    96-GT-134 
IGTI  1996  Preliminary Gas Turbine Combustor Design Using a Network Approach  Peter J. Stuttaford, Philip A. Rubini, Cranfield University, Cranfield, Bedfordshire, U.K.    96-GT-135 
IGTI  1996  Flow Visualization and Leakage Measurements of Stepped Labyrinth Seals; Part 1: Annular Groove  David L. Rhode, James W. Johnson, Texas A&M University, College Station, TX, USA; Daniel H. Broussard, Texaco USA, Houston, TX, USA    96-GT-136 
IGTI  1996  Flow Visualization and Leakage Measurements of Stepped Labyrinth Seals; Part 2: Sloping Surfaces  David L. Rhode, Texas A&M University, College Station, TX, USA; James S. Younger, Solar Turbines, Inc., DeSoto, TX, USA; Marcus D. Wernig, Schlumberger Anadrill, Sugar Land, TX, USA    96-GT-137 
IGTI  1996  Application of Thermochromic Liquid Crystal to Rotating Surfaces  C. Camci, The Pennsylvania State University, University Park, PA, USA; B. Glezer, Solar Turbines Incorporated, San Diego, CA, USA; J.M. Owen, R.G. Pilbrow, B.J. Syson, University of Bath, Bath, UK    96-GT-138 
IGTI  1996  Flow Development Through Inter-Turbine Diffusers  Robert G. Dominy, David A. Kirkham, University of Durham, Durham, UK; Andrew D. Smith, Rolls-Royce PLC, Derby, U.K.    96-GT-139 
IGTI  1996  Comparison Between Complete Hilbert Transform and Simplified Solutions of the Moore Rotating Stall Model  Gianmario L. Arnulfi, University of Udine, Udine, Italy; Fabio L. Ghiglino, Aristide F. Massardo, University of Genova, Genova, Italy    96-GT-140 
IGTI  1996  IGV-Rotor Interaction Analysis in a Transonic Compressor Using the Navier-Stokes Equations  Andrea Arnone, University of Florence, Florence, Italy; Roberto Pacciani, Nuovo Pignone S.p.A., Florence, Italy    96-GT-141 
IGTI  1996  The Prediction of Laminar Flame Speeds for Weak Mixtures  D. Kretschmer, J. Odgers, Université Laval, Québec, QC, Canada    96-GT-142 
IGTI  1996  Anchored CCD for Gas Turbine Combustor Design and Data Correlation  Allen M. Danis, David L. Burrus, Hukam C. Mongia, GE Aircraft Engines, Cincinnati, OH, USA    96-GT-143 
IGTI  1996  Next-Generation Integration Concepts for Air Separation Units and Gas Turbines  Arthur R. Smith, Joseph Klosek, Donald W. Woodward, Air Products and Chemicals, Inc., Allentown, PA, USA    96-GT-144 
IGTI  1996  Design and Test of a New Axial Compressor for the Nuovo Pignone Heavy Duty Gas Turbines  Erio Benvenuti, Nuovo Pignone S.P.A., Firenze, Italy    96-GT-145 
IGTI  1996  Investigation of Wedge Probe Wall Proximity Effects Part 1: Experimental Study  Peter D. Smout, Rolls-Royce plc., Derby, United Kingdom; Paul C. Ivey, Cranfield Universtiy, Bedford, United Kingdom    96-GT-146 
IGTI  1996  Investigation of Wedge Probe Wall Proximity Effects Part 2: Numerical and Analytical Modelling  Peter D. Smout, Rolls-Royce plc., Derby, United Kingdom; Paul C. Ivey, Cranfield Universtiy, Bedford, United Kingdom    96-GT-147 
IGTI  1996  Aircraft Gas Turbine Engine Fuel Pumping Systems in the 21st Century  Lowell D. Hansen, Gregory D. Kucera, Jeffrey S. Clemons, Jinkook Lee, Argo-Tech Corporation, Cleveland, OH, USA    96-GT-148 
IGTI  1996  A Study on Axial Skewing Effect of a Turbine Stator by 3-D Navier-Stokes Analysis  Naixing Chen, Qian Zhou, Weiguang Huang, Chinese Academy of Sciences, Beijing, China    96-GT-149 
IGTI  1996  3-D Numerical Simulation of the Flow through a Turbine Blade Cascade with Cooling Injection at the Leading Edge  Dieter Bohn, Karsten Kusterer, Harald Schönenborn, Aachen University of Technology, Aachen, Germany    96-GT-150 
IGTI  1996  A Numerically Supported Investigation of the 3D Flow in Centrifugal Impellers Part I: The Validation Base  Ch. Hirsch, S. Kang, G. Pointel, Vrije Universiteit Brussel, Brussel, Belgium    96-GT-151 
IGTI  1996  A Numerically Supported Investigation of the 3D Flow in Centrifugal Impellers Part II: Secondary Flow Structure  Ch. Hirsch, S. Kang, G. Pointel, Vrije Universiteit Brussel, Brussel, Belgium    96-GT-152 
IGTI  1996  Study of a Surge-Free Centrifugal Compressor with Automatically Variable Inlet and Diffuser Vanes  Hideomi Harada, Ebara Research Company, Limited, Fujisawa-Shi, Japan    96-GT-153 
IGTI  1996  The Use of Circumferentially Nonuniform Stators to Attenuate LP Compressor Rotor-Stator-Strut Aerodynamic and Mechanical Interactions  Markland G. Jones, Michael T. Barton, AlliedSignal Engines, Phoeniz, AZ, USA; Walter F. O'Brien, Virginia Polytechnic Institute and State University, Blacksburg, VA, USA    96-GT-154 
IGTI  1996  Performance of Low Solidity and Conventional Diffuser Systems for Centrifugal Compressors  Abraham Engeda, Naresh K. Amineni, Michigan State University, East Lansing, MI, USA; William C. Hohlweg, Gregory L. Direnzi, Elliot Turbomachinery Company, Jeannette, PA, USA    96-GT-155 
IGTI  1996  On the Application of Chimera/Unstructured Hybrid Grids for Conjugate Heat Transfer  Kai-Hsiung Kao, Meng-Seng Liou, NASA Lewis Research Center, Cleveland, OH, USA    96-GT-156 
IGTI  1996  Unsteady Flow in the Vaned Diffuser of a Medium Specific Speed Pump  Felix A. Muggli, Donald Wiss, Klaus Eisele, Zhengji Zhang, Michael V. Casey, Sulzer Innotec, Winterthur, Switzerland; Paul Galpin, Advanced Scientific Computing, Waterloo, ON, Canada    96-GT-157 
IGTI  1996  Turbine Airfoil Design Optimization  Sanjay Goel, Cofer, John I., IV, Hardev Singh, General Electric Company, Schenectady, NY, USA    96-GT-158 
IGTI  1996  Turbulent Flow Computations in Rotating Cavities Using Low-Reynolds-Number Models  Hector Iacovides, Kostas S. Nikas, Marcel A.F. Te Braak, UMIST, Manchester, UK    96-GT-159 
IGTI  1996  Calculation of Transition in Adverse Pressure Gradient Flow by Conditioned Equations  J. Steelant, E. Dick, Universiteit Gent, Gent, Belgium    96-GT-160 
IGTI  1996  The Influence of Rotation on Impingement Cooling  Ch. Mattern, D.K. Hennecke, Technical University Darmstadt, Darmstadt, Germany    96-GT-161 
IGTI  1996  The Role of the Impingement Plate in Array Heat Transfer  Kenneth W. Van Treuren, USAF Academy, Colorado, USA; Zoulan Wang, Peter Ireland, Terry V. Jones, University of Oxford, Oxford, United Kingdom; S.T. Kohler, Rolls-Royce Plc., Bristol, United Kingdom    96-GT-162 
IGTI  1996  Comparison and Prediction of Local and Average Heat Transfer Coefficients under an Array of Inline and Staggered Impinging Jets  Kenneth W. Van Treuren, USAF Academy, Colorado, USA; Zoulan Wang, Peter Ireland, Terry V. Jones, University of Oxford, Oxford, United Kingdom; S.T. Kohler, Rolls-Royce Plc., Bristol, United Kingdom    96-GT-163 
IGTI  1996  How to Get Component Maps for Aircraft Gas Turbine Performance Calculations  Joachim Kurzke, MTU München Gmbh, München, Germany    96-GT-164 
IGTI  1996  An Object-Oriented Approach to Gas Turbine Performance Computation  Peng Yip, Ho, Nanyang Technological University, Singapore; Poh Seng, Ng, Republic of Singapore Air Force, Singapore    96-GT-165 
IGTI  1996  Measurements in a Transitional Boundary Layer with Görtler Vortices  Ralph J. Volino, United States Naval Academy, Annapolis, MD, USA; Terrence W. Simon, University of Minnesota, Minneapolis, MN, USA    96-GT-166 
IGTI  1996  A Row of Streamwise-Inclined Jets in Crossflow: Measurements and Calculations  Matthew J. Findlay, Pingfan He, Martha Salcudean, Ian S. Gartshore, University of British Columbia, Vancouver, British Columbia, Canada    96-GT-167 
IGTI  1996  Three-Dimensional Blade Boundary Layer and Endwall Flow Development in the Nozzle Passage of a Single Stage Turbine  D. Ristic, B. Lakshminarayana, Pennsylvania State University, University Park, PA, USA    96-GT-168 
IGTI  1996  Heat Transfer Measurements on a Turbine Airfoil at Various Reynolds Numbers and Turbulence Intensities Including Effects of Surface Roughness  A. Hoffs, U. Drost, A. Bölcs, EPFL-LTT, Lausanne, Switzerland    96-GT-169 
IGTI  1996  Flow Field Diagnosis in Multistage Axial Compressors  J. Liu, Z.-C. Zhang, D.-J. Ye, Tsinghua University, Beijing, China    96-GT-170 
IGTI  1996  Experimental Investigation on Rotating Stall in a Centrifugal Blower with Two and Four Stages and Vaneless Diffusers  Gianmario L. Arnulfi, Piero Pinamonti, Universitá di Udine, Udine, Italy; Diego Micheli, Universitá di Trieste, Trieste, Italy    96-GT-171 
IGTI  1996  Evaluation of the External Heat Transfer Coefficients in the High-Pressure Turbine of a Full-Scale Core Engine  A.R. Narcus, H.R. Przirembel, F.O. Soechting, Pratt & Whitney Aircraft, West Palm Beach, FL, USA    96-GT-172 
IGTI  1996  Effect of Aspect Ratio on the Buoyancy Driven Reverse Flow Near the Leading Wall of Rotating Cooling Passages  Prabhat Tekriwal, GE Corporate Research and Development, Schenectady, NY, USA    96-GT-173 
IGTI  1996  Flowfield Measurements for Film Cooling Holes with Expanded Exits  K. Thole, M. Gritsch, A. Schulz, S. Wittig, Universität Karlsruhe, Karlsruhe, Germany    96-GT-174 
IGTI  1996  Influence of a Leaking Gap Downstream of the Injection Holes on Film Cooling Performance  Y. Yu, M.K. Chyu, Carnegie Mellon University, Pittsburgh, PA, USA    96-GT-175 
IGTI  1996  Leading Edge Film Cooling: Computations and Experiments Including Density Effects  Pingfan He, Dragos Licu, Martha Salcudean, Ian S. Gartshore, The University of British Columbia, Vancouver, B.C., Canada    96-GT-176 
IGTI  1996  A Prescribed Velocity Distribution Scheme for Turbomachine Blading  Udai K. Singh, De Montfort University, Leicester, United Kingdom    96-GT-177 
IGTI  1996  Compressible, Turbulent, Viscous Flow Computations for Blade Aerodynamics and Heat Transfer  A.A. Boretti, Fiat Research Center, Orbassano, Italy    96-GT-178 
IGTI  1996  The Influence of Outlet Stator Part Surface Roughness on the Performance of a Very Low Flow Coefficient Centrifugal Compressor Stage  Jan Paroubek, Václav Cyrus, AHT Energetics Ltd., Prague, Czech Republic; Jiri Kyncl, CKD Kompresory a.s., Prague, Czech Republic    96-GT-179 
IGTI  1996  Endwall Heat Transfer Measurements in a Transonic Turbine Cascade  P.W. Giel, NYMA, Inc., Brook Park, OH, USA; D.R. Thurman, G.J. Van Fossen, S.A. Hippensteele, R.J. Boyle, NASA Lewis Research Center, Cleveland, OH, USA    96-GT-180 
IGTI  1996  A Novel Technique for the Internal Blade Cooling  B. Glezer, H.K. Moon, T. O'Connell, Solar Turbines Incorporated, San Diego, CA, USA    96-GT-181 
IGTI  1996  CFD Indications of Premix Flame Stability in a Gas Turbine Combustor  J. Allan, Rolls-Royce Gas Turbine Engines (Canada) Inc., Dorval, Quebec, Canada    96-GT-182 
IGTI  1996  Jet Fuel Oxidation and Deposition  Colette C. Knight, James C. Carnahan, Kevin Janora, John F. Ackerman, GE Corporate Research and Development, Schenectady, NY, USA    96-GT-183 
IGTI  1996  Modelling Turbulent Combustion in a Non-Adiabatic CO/H2 Flame Using Reaction Progress Variables  Jim B.W. Kok, Jurgen J.J. Louis, University of Twente, Enschede, The Netherlands    96-GT-184 
IGTI  1996  Non-Intrusive Thermometry in Liquid Kerosene Fuelled Combustor Sector Rigs Using Coherent Anti-Stokes Raman (CARS) and Comparison with CFD Temperature Predictions  J.D. Black, H.T. Brocklehurst, C.H. Priddin, Rolls-Royce plc, Derby, U.K.    96-GT-185 
IGTI  1996  Stochastic Modelling of NOx and Smoke Production in Gas Turbine Combustors  I.M. Aksit, J.B. Moss, Cranfield University, Bedford, England    96-GT-186 
IGTI  1996  Effects of Geometry on Slot-Jet Film Cooling Performance  Daniel G. Hyams, Kevin T. McGovern, James H. Leylek, Clemson University, Clemson, SC, USA    96-GT-187 
IGTI  1996  Internal Passage Heat Transfer Prediction Using Multiblock Grids and a k-w Turbulence Model  David L. Rigby, NYMA, Inc., Brook Park, OH, USA; A.A. Ameri, AYT Corporation, Brook Park, OH, USA; E. Steinthorssen, NASA Lewis Research Center, Cleveland, OH, USA    96-GT-188 
IGTI  1996  Analysis of Gas Turbine Rotor Blade Tip and Shroud Heat Transfer  A.A. Ameri, A.Y.T. Corporation, Brook Park, OH, USA; E. Steinthorsson, NASA Lewis Research Center, Cleveland, OH, USA    96-GT-189 
IGTI  1996  Enhancing Undergraduate Education: Design of a Gas Turbine Laboratory Facility  Kirk E. Hiles, Gregg W. Dixon, United States Coast Guard Academy, New London, CT, USA    96-GT-190 
IGTI  1996  The Turboexpander a Design, Make and Test Student Project  J. D. Denton, Whittle Laboratory, Cambridge, UK    96-GT-191 
IGTI  1996  Integrated Gas Turbine Technology Education at Durham University  Harry Marsh, Robert Dominy, David Gregory-Smith, Li He, Durham University, Durham, England, U.K.    96-GT-192 
IGTI  1996  ATEC: The Aerodynamic Turbine Engine Code for the Analysis of Transient and Dynamic Gas Turbine Engine System Operations Part 1: Model Development  Doug Garrard, Sverdrup Technology, Inc. / AEDC Group, Arnold AFB, TN, USA    96-GT-193 
IGTI  1996  ATEC: The Aerodynamic Turbine Engine Code for the Analysis of Transient and Dynamic Gas Turbine Engine System Operations Part 2: Numerical Simulations  Doug Garrard, Sverdrup Technology, Inc. / AEDC Group, Arnold AFB, TN, USA    96-GT-194 
IGTI  1996  Development of a Dual-Fuel Injection System for Lean Premixed Industrial Gas Turbines  Luke H. Cowell, Amjad Rajput, Douglas C. Rawlins, Solar Turbines Incorporated, San Diego, CA, USA    96-GT-195 
IGTI  1996  Turbomachinery Teaching and Research as a Supplement to Mechanical Engineering Education  Abraham Engeda, Michigan State University, E. Lansing, MI, USA    96-GT-196 
IGTI  1996  An Instructional Cogeneration Laboratory Using Gas Turbine Technology  Andrew Banta, Ngo Dinh Thinh, California State University, Sacramento, CA, USA    96-GT-197 
IGTI  1996  Assessment of Three Turbulence Models in a Compressor Rotor  A. Shabbir, J. Zhu, NASA Lewis Research Center, Cleveland, OH, USA; M. Celestina, NYMA Inc., Cleveland, OH, USA    96-GT-198 
IGTI  1996  The Path to Predicting Bypass Transition  R.E. Mayle, A. Schulz, Universität Karlsruhe, Karlsruhe, Germany    96-GT-199 
IGTI  1996  Full Surface Local Heat Transfer Coefficient Measurements in a Model of an Integrally Cast Impingement Cooling Geometry  David R.H. Gillespie, Zuolan Wang, Peter T. Ireland, University of Oxford, Oxford, UK; S. Toby Kohler, Rolls Royce, Bristol, UK    96-GT-200 
IGTI  1996  Convective Heat Transfer of Cubic Fin Arrays in a Narrow Channel  M.K. Chyu, Y.C. Hsing, Carnegie Mellon University, Pittsburgh, PA, USA; V. Natarajan, The BOC Group, Murray Hill, NJ, USA    96-GT-201 
IGTI  1996  Variable Geometry Pipe Diffusers  J.W. Salvage, United Technologies, Syracuse, NY, USA    96-GT-202 
IGTI  1996  Measurements and Prediction of the Effects of Surface Roughness on Profile Losses and Deviation in a Turbine Cascade  Richard J. Kind, Peter J. Serjak, Michael W.P. Abbott, Carleton University, Ottawa, Canada    96-GT-203 
IGTI  1996  Evaluation of the Effectiveness of a Metal Deactivator and Other Additives in Reducing Insolubles in Aviation Fuels  E. Grant Jones, Innovative Scientific Solutions, Inc., Beavercreek, OH, USA; Walter J. Balster, Lori M. Balster, Systems Research Laboratories, Dayton, OH, USA    96-GT-204 
IGTI  1996  Coupled Lagrangian Monte Carlo PDF-CFD Computation of Gas Turbine Combustor Flowfields with Finite-Rate Chemistry  Anil K. Tolpadi, Iris Z. Hu, Sanjay M. Correa, General Electric Research & Development Center, Schenectady, NY, USA; David L. Burrus, General Electric Aircraft Engines, Cincinnati, OH, USA    96-GT-205 
IGTI  1996  Response of a Turbofan Engine Compression System to Disturbed Inlet Conditions  Adnan M. Abdel-Fattah, Defence Science and Technology Organization, Melbourne, Australia    96-GT-206 
IGTI  1996  Effect of Periodic Wake Passing on Film Effectiveness of Inclined Discrete Cooling Holes Around the Leading Edge of a Blunt Body  Ken-ichi Funazaki, Eitaro Koyabu, Iwate University, Morioka, Japan; Shigemichi Yamawaki, Ishikawajima-Harima Heavy Industries Co., Tokyo, Japan    96-GT-207 
IGTI  1996  Aerodynamic Aspects of Endwall Film-Cooling  S. Friedrichs, H.P. Hodson, W.N. Dawes, University of Cambridge, Cambridge, United Kingdom/FONT>    96-GT-208 
IGTI  1996  Fluctuating Thermal Field in the Near Hole Region for Film Cooling Flows  Atul Kohli, David G. Bogard, University of Texas at Austin, Austin, TX, USA    96-GT-209 
IGTI  1996  High-Accuracy Turbine Performance Measurements in Short-Duration Facilities  Charles W. Haldeman Jr., Michael G. Dunn, Calspan - UB Research Center, Buffalo, NY, USA    96-GT-210 
IGTI  1996  Power Turbine Remaining Life Analysis: Experience and Practical Considerations  Robert J. Klova, P.E., Hermes Galatis, P.E., CONMEC, Inc., Bethlehem, PA, USA    96-GT-211 
IGTI  1996  The Enhanced TF40B Engine: A Modular Upgrade  Stephen D. Metz, U.S. Navy, San Diego, CA, USA; Edward M. House, Naval Surface Warfare Center, Carderock Division, Philidelphia, PA, USA; Howard Rubenstein, AlliedSignal Aerospace, Stratford, CT, USA    96-GT-212 
IGTI  1996  Development of a Diagnostic Tool to Trouble Shoot LM2500 Performance & Controls Problems  Bruce D. Thompson, Richard Raczkowski, Fleet Technical Support Center, Pacific, San Diego, CA, USA    96-GT-213 
IGTI  1996  LM2500 High Pressure Turbine Blade Refurbishment  Matthew J. Driscoll, Peter P. Descar Jr., Gerald B. Katz, Naval Surface Warfare Center, Philadelphia, PA, USA; Walter E. Coward, Naval Sea Systems Command, Washington, DC, USAT>    96-GT-214 
IGTI  1996  Redesigning a Generator Set for Improved Maintenance  William E. Masincup, Naval Sea System Command, Arlington, VA, USA; Jack Halsey, P.E., Allison Engine Company, Indianapolis, IN, USA; Dennis Russom, P.E., Naval Surface Warfare Center, Philadelphia, PA, USA    96-GT-215 
IGTI  1996  Managing Naval Gas Turbines Through a Memorandum of Understanding  J. Albert Markus, Ministry of Defence, Foxhill, Bath, United Kingdom; Andy M.G. Glennie, Ministry of Defence, The Hague, The Netherlands    96-GT-216 
IGTI  1996  Allison Model 501-KH Industrial Gas Turbine Engine  Ronald P. Porter, Allison Engine Company, Indianapolis, IN, USA    96-GT-217 
IGTI  1996  Operational Experience with the World's First Offshore Turboexpanders with Magnetic Bearings  Harald Underbakke, Statoil, Stavanger, Norway    96-GT-218 
IGTI  1996  Joining of Wrought Ni-Base Combustor Alloys  A.M. Ritter, M.R. Jackson, N. Abuaf, M.A. Lacey, A.S. Feitelberg, GE Corporate Research & Development, Schenectady, NY, USA; P. Lang, Acraline Products, Inc., Tipton, IN, USA    96-GT-219 
IGTI  1996  Nondestructive Evaluation of Locally Repaired Coating for Gas Turbine Blades  Y. Shen, N. Pietranera, U. Guerreschi, S. Corcoruto, Ansaldo, Genoa, Italy; E. Gandini, Atla, Turin, Italy    96-GT-220 
IGTI  1996  Adiabatic Effectiveness and Heat Transfer Coefficient on a Film-Cooled Rotating Blade  Vijay K. Garg, AYT Corporation, c/o NASA Lewis Research Center, Cleveland, OH, USA    96-GT-221 
IGTI  1996  Transonic Film-Cooling Investigations: Effects of Hole Shapes & Orientations  S. Wittig, A. Schulz, M. Gritsch, K.A. Thole, Universität Karlsruhe, Karlsruhe, Germany    96-GT-222 
IGTI  1996  Comparison of Predicted and Experimental Nusselt Number for a Film-Cooled Rotating Blade  Vijay K. Garg, AYT Corporation c/o NASA Lewis Research Center, Cleveland, OH, USA; Reza S. Abhari, The Ohio State University, Columbus, OH, USA    96-GT-223 
IGTI  1996  Prediction of Effectiveness and Heat Transfer Using a New 2-D Injection and Dispersion Model of the Film Cooling Process  S. Neelakantan, M.E. Crawford, The University of Texas at Austin, Austin, TX, USA    96-GT-224 
IGTI  1996  Applications of Advanced Liquid Crystal Video Thermography to Turbine Cooling Passage Heat Transfer Measurement  Robert P. Campbell, Michael J. Molezzi, General Electric Corporate R&D, Schenectady, NY, USA    96-GT-225 
IGTI  1996  Three Dimensional Analysis of Advanced Swirl Vane/Nozzle Assemblies  Gerald J. Micklow, University of Florida, Gainesville, FL, USA; Michael Benjamin, Parker Hannifin Corporation, Cleveland, OH, USA    96-GT-226 
IGTI  1996  Effects of Steam Injection and Stochiometry on Cyclone Gasification of Wood Powder  Christian Fredriksson, Björn Kjellström, Luleå University of Technology, Luleå, Sweden; Bengt Degerman, DEMEC AB, Gunnarsbyn, Sweden    96-GT-227 
IGTI  1996  Reynolds Stress Tensor Measurements in a Centrifugal Compressor Vaned Diffuser  Ali Pinarbasi, Mark W. Johnson, The University of Liverpool, Liverpool, UK    96-GT-228 
IGTI  1996  The Effect of High Temperature Feedwater on the Performance of an Evaporative Cooler Installed in a Gas Turbine Combustion Air Inlet System  R.S. Johnson, Sr., P.E., Solar Turbines, San Diego, CA, USA    96-GT-229 
IGTI  1996  A Unique Approach to HRSG Bypass Dampers  David T. Ryan, Damper Design Inc.,Bethlehem, PA, USA; Judith A. Veatch, Black & Veach, Overland Park, KS, USA; Akber Pasha, Henry Vogt Machine Company, Louisville, KY, USA    96-GT-230 
IGTI  1996  Westinghouse Combustion Turbine Performance in Coal Gasification Combined Cycles  Richard A. Newby, Westinghouse Electric Corporation, Pittsburgh, PA, USA; Ronald L. Bannister, Frank Miao, Westinghouse Electric Corporation, Orlando, FL, USA    96-GT-231 
IGTI  1996  A New Approach for a Low-Cooled Ceramic Nozzle Vane  C. Gutmann, A. Schulz, S. Wittig, Universität Karlsruhe, Karlsruhe, Germany    96-GT-232 
IGTI  1996  Application of Advanced Experimental Techniques in the Development of a Cooled Turbine Nozzle  H.K. Moon, B. Glezer, Solar Turbines Incorporated, San Diego, CA, USA    96-GT-233 
IGTI  1996  Prediction of Turbulent Flow and Heat Transfer in Rotating Square and Rectangular Smooth Channels  Sandip Dutta, University of South Carolina, Columbia, SC, USA; Malcolm J. Andrews, Je-Chin Han, Texas A&M University, College Station, TX, USA    96-GT-234 
IGTI  1996  Optimization of Transient Heat Transfer Measurements Using Thermochromic Liquid Crystals Based on an Error Estimation  Rainer Höcker, ABB Corporate Research Center, Baden-Dättwil, Switzerland    96-GT-235 
IGTI  1996  PIV Measurements of Periodically Forced Flat Plate Film Cooling Flows with High Free Stream Turbulence  Sivaram P. Gogineni, Darryl D. Trump, Systems Research Laboratories, Dayton, OH, USA; David J. Pestlan, University of Dayton Research Institute, Dayton, OH, USA; Richard B. Rivir, Aero Propulsion and Power Directorate, Wright-Patterson AFB, OH, USA    96-GT-236 
IGTI  1996  Experimental Measurement and CFD Prediction of Heat Transfer to a Nozzle Guide Vane  Trevor J. Kirsten, Andreas M. Lippert, CSIR, Aerotek, Pretoria, South Africa; Glen C. Snedden, Graham D.J. Smith, University of Natal, Durban, Dalbridge, South Africa    96-GT-237 
IGTI  1996  Aerodynamic Performance of Rear Axial Compressor Stage with Annular Diffuser and Outlet Chamber  Václav Cyrus, AHT Energetics Ltd., Prague-Bechovice, Czech Republic    96-GT-238 
IGTI  1996  Comparisons of Rig and Engine Dynamic Events in the Compressor of an Axi-Centrifugal Turboshaft Engine  A. Karl Owen, Duane L. Mattern, Dzu K. Le, NASA Lewis Research Center, Cleveland, OH, USA    96-GT-239 
IGTI  1996  Invariant Coordinate Systems for Compressor Control  Dr. B.W. Batson, Compressor Controls Corporation, Des Moines, IA, USA    96-GT-240 
IGTI  1996  Actuator Placement for Active Surge Control in a Multi-Stage Axial Compressor  M. Montazeri-Gh., D.J. Allerton, R.L. Elder, Cranfield University, Bedford, England    96-GT-241 
IGTI  1996  Health Monitoring of Turbine Engine Gas Path Components and Measurement Instruments  Y.H. Lee, R. Singh, Cranfield University, Bedford, UK    96-GT-242 
IGTI  1996  Experimental Research on the Aerodynamic Performances of 2-D Lobed Exhaust Ejector Systems  Hu Hui, Liu Huoxing, Li Li, Wu Shousheng, Beijing University of Aeronautics and Astronautics, Beijing, P.R. China    96-GT-243 
IGTI  1996  Inlet and Nozzle Technology for 21st Century Fighter Aircraft  Marvin C. Gridley, Steven H. Walker, Wright Laboratory, Wright-Patterson AFB, OH, USA    96-GT-244 
IGTI  1996  Propulsion System Considerations for Future Supersonic Transports - A Global Perspective  Robert A. Mercure, National Aeronautics and Space Administration, Washington, DC, USA    96-GT-245 
IGTI  1996  Biomass-Fired Atmospheric Gas Turbine Plant  M. Fesharaki, S. Moser, H. Halozan, H. Jericha, Graz University of Technology, Graz, Austria    96-GT-246 
IGTI  1996  Hydrogen-Fueled Combustion Turbine Cycles  Ronald L. Bannister, David J. Huber, Westinghouse Electric Corporation, Orlando, FL, USA; Richard A. Newby, John A. Paffenbarger, Westinghouse Electric Corporation, Pittsburgh, PA, USA    96-GT-247 
IGTI  1996  Thermal Efficiency Projections of a Simple-Cycle Gas Turbine in Biogas Power Generation  David E. Yomogida, Valentino M. Tiangco, California Energy Commission, Sacramento, CA, USA; Ngo D. Thinh, California State University, Sacramento, CA, USA; Ying Lee, Unviersity of California, Davis, CA USA    96-GT-248 
IGTI  1996  Experimental Investigation of Turbulence Structures in the Boundary Layer of a Highly Loaded Turbine Cascade  Dirk Wunderwald, ABB Turbo Systems Ltd., Baden, Switzerland; Leonhard Fottner, Universität der Bundeswehr München, Neubiberg, Germany    96-GT-249 
IGTI  1996  Dutch Experience with Hot Windbox Repowering  P.J. Ploumen, KEMA, Arnhem, The Netherlands; J.J. Veenema, N.V. EPON, Zwolle, The Netherlands    96-GT-250 
IGTI  1996  Passage Flow Structure and its Influence on Endwall Heat Transfer in a 90° Turning Duct: Turbulent Stresses and Turbulent Kinetic Energy Production  Brian G. Wiedner, Brown & Root, Inc., Houston, TX, USA; Cengiz Camci, The Pennsylvania State University, University Park, PA, USA    96-GT-251 
IGTI  1996  Status of the Development of the CGT301, a 300 kW Class Ceramic Gas Turbine  Takao Mikami, Shinya Tanaka, Masashi Tatsuzawa, Takeshi Sakida, Ishikawajima-Harima Heavy Industries Co., Ltd., Tokyo, Japan    96-GT-252 
IGTI  1996  Impact of Rotor Wakes on Steady-State Axial Compressor Performance  P. Deregel, C.S. Tan, Massachusetts Institute of Technology, Cambridge, MA, USA    96-GT-253 
IGTI  1996  A Review of Recent Research on Contra-Rotating Axial Flow Compressor Stage  P.B. Sharma, A. Adekoya, Delhi College of Engineering, Delhi, India    96-GT-254 
IGTI  1996  Experimental Contribution on the Significance and the Control by Transverse Injection of the Horseshoe Vortex  D.P. Georgiou, V.A. Papavasilopoulos, M. Alevisos, University of Patras, Patras, Greece    96-GT-255 
IGTI  1996  Cooling and Sealing Air System in Industrial Gas Turbine Engines  A.W. Reichert, M. Janssen, Siemens AG KWU Group, Mülheim, Germany    96-GT-256 
IGTI  1996  The Effect of Impeller Inlet Annular Turning Vanes on Multistage Centrifugal Compressor Performance  Hélène Balligand, Xiubao Huang, Lamson Corporation, Syracuse, NY, USA; Joost J. Brasz, Carrier Corporation, Syracuse, NY, USA    96-GT-257 
IGTI  1996  Fully-Developed Buoyancy-Affected Flow and Heat Transfer in an Axially Rotating Annular Channel with Longitudinal Partitions  Andrei E. Khodak, Vrije Universiteit Brussel, Brussels, Belgium; Vladimir V. Ris, Alexander I. Kirillov, Evgeni M. Smirnov, St.-Petersburg State Technical University, St.-Petersburg, Russia    96-GT-258 
IGTI  1996  The Effect of Blade Angle Design Selection on Wave-Turbine Engine Performance  William E. Lear, Robert P. Kielb,University of Florida, Gainesville, FL, USA    96-GT-259 
IGTI  1996  A Parametric Study of the Flutter Stability Characteristics of Turbomachine Cascades  H. Försching, DLR Institute of Aeroelasticity, Göttingen, Germany    96-GT-260 
IGTI  1996  Jet, Wake and Intrinsic Motion in Impellers of Centrifugal Compressors  Y.N. Chen, Sulzer Innotec Ldr., Winterthur, Switzerland; U. Seidel, U. Haupt, M. Rautenberg, University of Hannover, Hannover, Germany    96-GT-261 
IGTI  1996  A Study of the Flow Characteristics in the Inducer Bleed Slot of a Centrifugal Compressor  P.A. Eynon, A. Whitfield, University of Bath, Bath, Avon, England; M.R. Firth, A.J. Parkes, R. Saxton, Holset Engineering Co., Huddersfield, West Yorkshire, England    96-GT-262 
IGTI  1996  Effect of Circumferential Inlet Flow Distortion and Swirl on the Flow Field of an Axial Flow Fan Stage  K. Viswanath, M. Govardhan, Indian Institute of Technology, Madras, India    96-GT-263 
IGTI  1996  Analytical Solution of Whirl Speed and Mode Shape for Rotating Shafts  S.M. Yang, G.J. Sheu, C.D. Yang, National Cheng Kung University, Taiwan, R.O.C.    96-GT-264 
IGTI  1996  A Probabilistic Creep Fatigue Computer Program for Structural Integrity Analysis  Harry R. Millwater, Graham G. Chell, David S. Riha, Southwest Research Institute, San Antonio, TX, USA    96-GT-265 
IGTI  1996  Predicting Gas Turbine Reliability to Assess Risks for Purchased Power Agreements  Wolfram Krockow, Strategic Power Systems International GmbH, Düsseldorf, Germany    96-GT-266 
IGTI  1996  Reliability Analysis of Power Generation Gas Turbine Auxiliaries Using Structured Analytical Methods  Horst Rönnebeck, ABB Power Generation Ltd, Baden, Switzerland    96-GT-267 
IGTI  1996  Sensitivity Controlled Response Surface Approach for Reliability Based Design  Stefan Reh, Martin Scheu, ABB Power Generation Ltd., Baden, Switzerland    96-GT-268 
IGTI  1996  European Standardisation Efforts on Fibre-Reinforced Ceramic Matrix Composites  Marc Steen, Institute for Advanced Materials, Petten, The Netherlands    96-GT-269 
IGTI  1996  ASTM Standards for Monolithic and Composite Advanced Ceramics: Industrial, Governmental and Academic Cooperation  Michael G. Jenkins, University of Washington, Seattle, WA, USA; George D. Quinn, National Institute of Standards and Technology, Gaithersburg, MD, USA    96-GT-270 
IGTI  1996  The Thermal-Mechanical Behavior of Selected Si3N4 and SiC Ceramics  Norman L. Hecht, Hongsang Rho, Nora R. Osborne, Dale E. McCullum, Steven M. Goodrich, University of Dayton Research Institute, Dayton, OH, USA    96-GT-271 
IGTI  1996  Superduplex Stainless Steel Use in Manufacturing Highly Sour Gas Centrifugal Compressors  Francois Millet, Patrick Friez, Angelo Franzi, FRAMATOME - THERMODYN, Le Creusot, France; Bernard Bonnefois, Creusot Loire Industrie - Usinor Sacilor Group, Le Creusot, France; Jean-Marc Lardon, TECPHY, Firminy Division, Firminy, France    96-GT-272 
IGTI  1996  Optimum Operation and Maintenance of Gas Turbines Offshore  Lars E. Bakken, Roald Skorping, Statoil, Norway    96-GT-273 
IGTI  1996  Dry Low NOx Combustion Systems Development and Operating Experience  Torsten Strand, ABB STAL, Finspong, Sweden    96-GT-274 
IGTI  1996  SPE "Mashproekt" Gas Turbine Engines for Gas Pumping Sets  Victor I. Romanov, Vladimir V. Lupandin, Anatoliy V. Kovalenko, Anatoliy I. Shelestyuk, SPE "Mashproekt," Nikolayev, Ukraine    96-GT-275 
IGTI  1996  Refurbishment of a Solar Centaur Compressor Set to Meet European Environmental Regulations  Herbert Rohrbacher, OMV Gasdepartment, Auersthal, Austria; John Barron,Solar Turbines Overseas Ltd., Brussels, Belgium    96-GT-276 
IGTI  1996  Power Plant Simulation Software for Optimizing Thermodynamic and Financial Plant Operation  Patrick R. Griffin, Maher Elmasri, Gwo-Tung Chen, Thermoflow Incorporated, Wellesley, MA, USA; Stephen Kamppila, Frank Basile, Selkirk Cogen Partners, L.P., Selkirk, NY, USA    96-GT-277 
IGTI  1996  Dynamic Modeling of Starting Aerodynamics and Stage Matching in an Axi-Centrifugal Compressor  Kevin Wilkes, Walter F. O'Brien, Virginia Polytechnic Institute and State University, Blacksburg, VA, USA; A. Karl Owen, U.S. Army Vehicle Propulsion Directorate, Cleveland, OH, USA    96-GT-278 
IGTI  1996  Stage-by-Stage Dynamic Compression System Modeling for Split Core and Bypass Systems  Jules W. Lindau, NASA Lewis Research Center, Cleveland, OH, USA; Walter F. O'Brien, Virginia Polytechnic Institute and State University, Blacksburg, VA, USA    96-GT-279 
IGTI  1996  Application of Aeroengine Aerodynamic Design Codes to Industrial Gas Turbine Design  David A. Little, Westinghouse Electric Corporation, Orlando, FL, USA; Keith Cobley, Rolls-Royce, plc, Derby, United Kingdom    96-GT-280 
IGTI  1996  Surface Temperature Measurement of Thermal Barrier Coatings Using Infrared Pyrometry  James A. Ruud, Robert D. Lillquist, Dennis M. Gray, GE Corporate Research and Development, Schenectady, NY, USA    96-GT-281 
IGTI  1996  The Effect of Thermal Aging on the Thermal Conductivity of Plasma Sprayed and EB-PVD Thermal Barrier Coatings  Ralph B. Dinwiddie, Stephen C. Beecher, Wallace D. Porter, Oak Ridge National Laboratory, Oak Ridge, TN, USA; Ben A. Nagaraj, G.E. Aircraft Engines, Cincinnati, OH, USA    96-GT-282 
IGTI  1996  The Effects of Environmental Contaminants on Industrial Gas Turbine Thermal Barrier Coatings  H.E. Eaton, N.S. Bornstein, United Technologies Research Center, East Hartford, CT, USA; J.T. DeMasi-Marcin, Pratt & Whitney Aircraft Company, East Hartford, CT, USA    96-GT-283 
IGTI  1996  Applications of Continuous Fiber Reinforced Ceramic Composites in Military Turbojet Engines  Patrick Spriet, Georges Habarou, Société Européenne de Propulsion, Bordeaux, France    96-GT-284 
IGTI  1996  Role of Environmental Deposits in Spallation of Thermal Barrier Coatings on Aeroengine and Land-based Gas Turbine Hardware  Marcus P. Borom, Curtis A. Johnson, Louis A. Peluso, GE Corporate Research and Development, Schenectady, NY, USA    96-GT-285 
IGTI  1996  Isothermal and Cyclic Oxidation of an Air Plasma-Sprayed Thermal Barrier Coating System  J. Allen Haynes, Mattison K. Ferber, Wallace D. Porter, Oak Ridge National Laboratory, Oak Ridge, TN, USA; E. Douglas Rigney, University of Alabama at Birmingham, Birmingham, AL, USA    96-GT-286 
IGTI  1996  Silicon Nitride Components for AGATA - A European Gas Turbine for Hybrid Vehicles  Robert Lundberg, Volvo Aero Corporation, Trollhättan, Sweden; Jan Adlerborn, AC Cerama AB, Robertsfors, Sweden    96-GT-287 
IGTI  1996  Characterization of Engine Stabilization for Diagnostic and Acceptance Testing  J.W. Bird, A.I. Georgantas, B.C. Barry, National Research Council, Ottawa, Canada; Capt. J.P. Francoeur, Capt. P. House, National Defence, Ottawa, Canada    96-GT-288 
IGTI  1996  Multivariable Control of Industrial Gas Turbines: Field Test Results  Ravi Rajamani, GE Corporate Research & Development, Schenectady, NY, USA; Bruce G. Norman, GE Power Generation Engineering, Schenectady, NY, USA    96-GT-289 
IGTI  1996  Evaluation of Thermochemical Recuperation and Partial Oxidation Concepts for Natural Gas-Fired Advanced Turbine Systems  Joseph K. Rabovitser, Mark J. Khinkis, Institute of Gas Technology, Des Plaines, IL, USA; Ronald L. Bannister, Frank Q. Miao, Westinghouse Electric Corporation, Power Generation Business Unit, Orlando, FL, USA    96-GT-290 
IGTI  1996  User-Oriented Gas Turbine Research at KEMA  R.A. Rooth, KEMA Nederland, B.V., Arnhem, The Netherlands    96-GT-291 
IGTI  1996  Collaborative Advanced Gas Turbine (CAGT) Program Status An International Initiative to Catalyze an Intercooled Aeroderivative (ICAD) Gas Turbine Launch Order  Barry Davidson, National Power, Swindon, England; Dan Whitney, Sacramento Municipal Utility District, Sacramento, CA, USA; Niels Laursen, ELKRAFT Power Company, Ltd., Copenhagen, Denmark; Art Cohn, Electric Power Research Institute, Palo Alto, CA, USA; Ge    96-GT-292 
IGTI  1996  Design of the Tempest Industrial Gas Turbine  Kevin R. Scott, Ian G. Amos, Paul D.P. Garbett, Roger G. Wells, European Gas Turbines, Lincoln, England    96-GT-293 
IGTI  1996  Development of Advanced Gas Turbine  H. Matsuzaki, Y. Suto, Y. Kanazawa, M. Sato, I. Kobayashi, Y. Kobayashi, Tohoku Electric Power Co., Inc., Sendai, Japan    96-GT-294 
IGTI  1996  Development of Ceramic Turbine Rotors and Nozzles for the 100kW Automotive Ceramic Gas Turbine Program  Satoru Yamada, Keiichiro Watanabe, Advanced Technical Ceramics Lab. NGK Insulators, Ltd., Nagoya, Aichi, Japan; Massaki Masuda, NGK Europe GmbH, Eschborn, Germany    96-GT-295 
IGTI  1996  Cost Effective Manufacturing Methods for Structural Ceramic Matrix Composite (CMC) Components  Dr. H. Wurtinger, Dr. A. Mühlratzer, MAN Technologie AG, Augsburg, Germany    96-GT-296 
IGTI  1996  Results of Small Gas Turbine for Distributed Generation Strategies Workshop  George A. Hay III, George Touchton, Art Cohn, EPRI Gas Turbine Program, Palo Alto, CA, USA; Paul Bautista, GRI, Chicago, IL, USA; William Parks, US DOE, Washington, DC, USA; Joseph Darguzas, Sarget & Lundy, Chicago, IL, USA    96-GT-297 
IGTI  1996  Inlet Conditioning Enhances Performance of Modern Combined Cycle Plants for Cost-Effective Power Generation  Septimus Van Der Linden, David E. Searles, ABB Power Generation, Richmond, VA, USA    96-GT-298 
IGTI  1996  Effects of Surface Roughness on Film Cooling  Donald L. Schmidt, Basav Sen, David G. Bogard, The University of Texas at Austin, Austin,TX, USA    96-GT-299 
IGTI  1996  Analysis of the Oil Film on the inside Surface of an Aero-Engine Bearing Chamber Housing  John W. Chew, Rolls-Royce plc, Derby, United Kingdom    96-GT-300 
IGTI  1996  Evaluation of New Process Options for Co-generation in the Sugar Industry  M.A. Gabra, B.O. Kjellström, Luleå University of Technology, Luleå, Sweden    96-GT-301 
IGTI  1996  A Simultaneous Solution Method Based on a Modular Approach for Power Plant Analyses and Optimized Designs and Operations  Giovanni Cerri, Universitá degli Studi Roma, Roma, Italy    96-GT-302 
IGTI  1996  Numerical Simulation of Particulate Two-Phase Flows in Curved Pipeline Geometries  S. Naik, The Robert Gordon University, Schoolhill, Aberdeen, UK    96-GT-303 
IGTI  1996  Predicted Turbine Heat Transfer for a Range of Test Conditions  R.J. Boyle, B.L. Lucci, NASA Lewis Research Center, Cleveland, OH, USA    96-GT-304 
IGTI  1996  A Novel Fluids Research Technique: Three-State Anemometry  M. Funes-Gallanzi, Warwick University, Coventry, UK    96-GT-305 
IGTI  1996  Manufacturing Methods, Random Defects and Quality Assurance in Relation to the Reliability of Turbine Components  A. Mitchell, University of British Columbia, Vancouver, BC, Canada    96-GT-306 
IGTI  1996  Numerical Investigation of the Unsteady Transonic 3D-Flow in Stator and Rotor Cascades with Oscillating Blades  Dieter Peitsch, Heinz E. Gallus, Stefan Weber, Rheinisch-Westfälische Technische Hochschule Aachen, Aachen, Germany    96-GT-307 
IGTI  1996  Investigation of the Flow and Heat Transfer in a Low Pressure Turbine Interdisc Cavity with Skewed Radial Jetflow  Alexander V. Mirzamoghadam, BMW Rolls-Royce Aero-Engines, Dahlewitz, Germany    96-GT-308 
IGTI  1996  Flow in a Rotating Cavity with a Peripheral Inlet and Outlet of Cooling Air  Xiaopeng Gan, Iraj Mirzaee, J. Michael Owen, D. Andrew, S. Rees, Michael Wilson, University of Bath, Bath, United Kingdom    96-GT-309 
IGTI  1996  CFD Based Sensitivity Study of Flow Parameters for Engine Like Film Cooling Conditions  Stefan Baldauf, Michael Scheurlen, Siemens AG/KWU, Mülheim/Ruhr, Germany    96-GT-310 
IGTI  1996  Development of an Aeroelastic Code Based on an Euler/Navier-Stokes Aerodynamic Solver  Milind A. Bakhle, Rakesh Srivastava, George L. Stefko, NASA Lewis Research Center, Cleveland, OH, USA; J. Mark Janus, Mississippi State University, MS, USA    96-GT-311 
IGTI  1996  Inverse Heat Transfer Engineering Design for Internally Cooled Gas Turbine Airfoils  Francisco J.T. Cunha, David A. DeAngelis, General Electric Company, Schenectady, NY, USA    96-GT-312 
IGTI  1996  Secondary Flow and It's Contribution to Heat Transfer Enhancement in a Blade Cooling Passage with Discrete Ribs  Zhengjun Hu, Jiarui Shen, Chinese Academy of Sciences, Beijing, China    96-GT-313 
IGTI  1996  Development of the Next Generation 1500°C Class Advanced Gas Turbine for 50Hz Utilities  S. Aoki, Y. Tsukuda, E. Akita, Y. Iwasaki, Mitsubishi Heavy Industries, Ltd., Takasago, Japan; R. Tomat, M. Rosso, C. Schips, Fiat Avio S.p.A., Turin, Italy    96-GT-314 
IGTI  1996  Development of the Sequential Combustion System for the ABB GT24/GT26 Gas Turbine Family  Franz Joos, Philipp Brunner, Burkhard Schulte-Werning, Khawar Syed, ABB Power Generation Ltd, Baden, Switzerland; Adnan Eroglu, ABB Management Ltd., Baden, Switzerland    96-GT-315 
IGTI  1996  Estimating Gas Turbine Internal Cycle Parameters Using a Neural Network  Nicolas W. Chbat, Ravi Rajamani, GE Corporate Research & Development, Schenectady, NY, USA; Todd A. Ashley, GE Power Generation Engineering, Schenectady, NY USA    96-GT-316 
IGTI  1996  Semi-Closed Gas Turbine/Combined Cycle with Water Recovery and Extensive Exhaust Gas Recirculation  Bruno Facchini, Daniele Fiaschi, Giampaolo Manfrida, Universit á di Firenze, Firenze, Italy    96-GT-317 
IGTI  1996  Experimental Assessment of the Emissions Benefits of a Ceramic Gas Turbine Combustor  K.O. Smith, A. Fahme, Solar Turbines Incorporated, San Diego, CA, USA    96-GT-318 
IGTI  1996  Ceramics for ATS Industrial Gas Turbines  Richard Wenglarz, Sy Ali, Allison Engine Company, Indianapolis, IN, USA; Abbie Layne, U.S. Department of Energy, Morgantown, WV, USA    96-GT-319 
IGTI  1996  Standards for Advanced Ceramics and Pre-Standardization Research - A Review  Roger Morrell, National Physical Laboratory, Teddington, Middlesex, UK    96-GT-320 
IGTI  1996  International Standardization Activities for Fine Ceramics - Status of ISO/TC 206 on Fine Ceramics  Takashi Kanno, Japan National Council for International Standardization on Fine Ceramics, Tokyo, Japan    96-GT-321 
IGTI  1996  The Offshore Application of a Dual-mode Injection Centrifugal Compressor and Improvements to Rotating Stall  Arne Lynghjem, Ove Svendsen, Harald Underbakke, Statoil, Stavenger, Norway    96-GT-322 
IGTI  1996  Magnetic Bearing Improvement Program at NOVA  Paul S. Alves, Barry M. Alavi, NOVA Gas Transmission Ltd., Calgary, Alberta, Canada    96-GT-323 
IGTI  1996  The Design and Evaluation of a 14 Stage, 16:1 Pressure Ratio Compressor for an Industrial Gas Turbine  Mohammad R. Saadatmand, Solar Turbines Incorporated, San Diego, CA, USA    96-GT-324 
IGTI  1996  Using an Auxiliary Power Unit (APU) Gas Turbine Engine to Start the LSD-41 Class Diesel Engines  Jeffrey S. Patterson, Naval Surface Warfare Center, Carderock Division, Philadelphia, PA, USA    96-GT-325 
IGTI  1996  A Gas Turbine Propulsion Plant with the Capability to Provide Steam for Both Injection and Aircraft Catapults  Wen Xueyou, Wei Yingxin, Jin Jierong, Fu Zhen, Harbin Marine Boiler & Turbine Research Institute, Harbin, China    96-GT-326 
IGTI  1996  Sea Trials/Commissioning of a Gas Turbine Powered High Speed Passenger Vessel  Chris Waldhelm, Solar Turbines, San Diego, CA, USA; Nigel Warren, FBM Marine Ltd., Cowes, UK    96-GT-327 
IGTI  1996  WR-21 Design and Maintenance  Carl L. Weiler, Westinghouse Electric Corporation, Sunnyvale, CA, USA; Alastair Broadbelt, Bernard Law, Rolls-Royce, Ansty, England    96-GT-328 
IGTI  1996  Analyzing Gas Turbine Failures to Identify Training Shortfalls  Lane Hunter Coward, Naval Sea Systems Command, Arlington, VA, USA; James R. Hardin, Westinghouse Electric Corporation, Pittsburgh, PA, USA    96-GT-329 
IGTI  1996  Endurance Testing of Marine Gas Turbines for the Royal Navy  Lieutenant Clive McCartney, Royal Navy, Farnborough, Hampshire, United Kingdom; Lieutenant Robin D. Hughes, Royal Navy, Bath, Avon, United Kingdom    96-GT-330 
IGTI  1996  Partial Regenerative Steam Injected Gas Turbine  Shigekazu. Uji, Ishikawajima-Harima Heavy Industries Co., Ltd., Tokyo, Japan    96-GT-331 
IGTI  1996  Dynamic Modeling of Single-Shaft Industrial Gas Turbine  R. Bettocchi, P.R. Spina, Università di Ferrara, Ferrara, Italy; F. Fabbri, Ferrari Auto S.P.A., Maranello (MO), Italy    96-GT-332 
IGTI  1996  A Methodology for Establishing Optimal Part-Load Operation of Industrial Gas Turbines  Fabio Bozza, Raffaele Tuccillo, Universitá di Napoli, Napoli, Italy    96-GT-333 
IGTI  1996  Steady-State and Time-Dependent Experimental Results of a NACA-3506 Cascade in an Annular Channel  Heiko Körbacher, Albin Bölcs, Swiss Federal Institute of Technology, Lausanne, Switzerland    96-GT-334 
IGTI  1996  A Modal Coupling for Fluid and Structure Analyses of Turbomachine Flutter. Application to a Fan Stage  Francois Moyroud, Georges Jacquet-Richardet, Institut National des Sciences Appliquées, Villeurbanne, France; Torsten Fransson, Royal Institute of Technology, Stockholm, Sweden    96-GT-335 
IGTI  1996  Biomass Gasification Hot Gas Filter Testing Results  Benjamin C. Wiant, Dennis M. Bachovchin, Westinghouse Electric Corporation, Orlando, FL, USA; Michael Onischak, Ronald H. Carty, Institute of Gas Technology, Des Plaines, IL, USA; Matthew Ratcliff, National Renewable Energy Laboratory, Golden, CO, USA    96-GT-336 
IGTI  1996  Experimental Determination of the Influence of Foreign Particle Ingestion on the Behavior of Hot-Section Components Including Lamilloy®  Matthew M. Weaver, Calspan Advanced Technology Center, Buffalo, NY, USA; Michael G. Dunn, The Ohio State University, Department of Aerospace Engineering, Columbus, OH, USA; Tab Heffernan, Allison Engine Company, Indianapolis, IN, USA    96-GT-337 
IGTI  1996  Computation of the Unsteady Transonic Flow in Harmonically Oscillating Turbine Cascades Taking into Account Viscous Effects  B. Grüber, V. Carstens, DLR, Göttingen, Germany    96-GT-338 
IGTI  1996  Oscillating Cascade Aerodynamics at Large Mean Incidence  Daniel H. Buffum, NASA Lewis Research Center, Cleveland, OH, USA; Vincent R. Capece, Aaron J. King, University of California, Davis, CA, USA; Yehia M. El-Aini, Pratt & Whitney, West Palm Beach, FL, USA    96-GT-339 
IGTI  1996  Validation of a Nonlinear Unsteady Aerodynamic Simulator for Vibrating Blade Rows  Timothy C. Ayer, Joseph M. Verdon, United Technologies Research Center, East Hartford, CT, USA    96-GT-340 
IGTI  1996  A Technique to Achieve Uniform Stress Distribution in Compressive Creep Testing of Advanced Ceramics at High Temperatures  Kenneth C. Liu, Christopher O. Stevens, Charles R. Brinkman, Oak Ridge National Laboratory, Oak Ridge, TN, USA; Nicholas E. Holshauser, North Carolina A & T State University, Greensboro, NC, USA    96-GT-341 
IGTI  1996  Fatigue Strength as a Function of Preloading in Dynamic Fatigue Testing of Glass and Ceramics  Sung R. Choi, Cleveland State University, Cleveland, OH, USA; Jonathan A. Salem, John P. Gyekenyesi, NASA Lewis Research Center, Cleveland, OH, USA    96-GT-342 
IGTI  1996  Wavelet Analysis for Gas Turbine Fault Diagnostics  N. Aretakis, K. Mathioudakis, National Technical University of Athens, Athens, Greece    96-GT-343 
IGTI  1996  An Assessment of the Performance of Closed Cycles with and without Heat Rejection at Cryogenic Temperatures  A. Agazzani, A.F. Massardo, University of Genova, Genoa, Italy; T. Korakianitis, Washington University, St Louis, MO, USA    96-GT-344 
IGTI  1996  A SemiClosed Cycle Gas Turbine with Carbon Dioxide-Argon as Working Fluid  Inaki Ulizar, Torrejon de Ardoz, Madrid, Spain; Pericles Pilidis, Cranfield University, Cranfield, Bedford, UK    96-GT-345 
IGTI  1996  Structural Design and High Pressure Test of a Ceramic Combustor for 1500°C Class Industrial Gas Turbine  I. Yuri, T. Hisamatsu, K. Watanabe, Y. Etori, Central Research Institute of Electric Power Industry, Yokosuka, Kanagawa, Japan    96-GT-346 
IGTI  1996  Progress in Fabrication of Silicon Nitride Structural Components for Turbomachinery Applications  John P. Pollinger, AlliedSignal Aerospace, Torrance, CA, USA    96-GT-347 
IGTI  1996  Ceramic Matrix Composites Application in Automotive Gas Turbine  Hiroshi Kaya, Petroleum Energy Center, Tokyo, Japan; Takao Izumi, Japan Automobile Research Institute, Tsukuba, Japan    96-GT-348 
IGTI  1996  Capacitive Measurement of Compressor and Turbine Blade Tip to Casing Running Clearance  D. Müller, S. Mozumdar, E. Johann, BMW Rolls-Royce GmbH, Dahlewitz, Germany; A.G. Sheard, BICC Thermoheat Ltd., Coventry, England    96-GT-349 
IGTI  1996  A Fast-Response Total Temperature Probe for Unsteady Compressible Flows  D.R. Buttsworth, T.V. Jones, University of Oxford, Oxford, United Kingdom    96-GT-350 
IGTI  1996  A Systematic Computational Methodology Applied to a Three-Dimensional Film-Cooling Flowfield  Dibbon K. Walters, James H. Leylek, Clemson University, Clemson, SC, USA    96-GT-351 
IGTI  1996  Aerodynamically Induced Radial Forces in a Centrifugal Gas Compressor - Part 2: Computational Investigation  Michael B. Flathers, Solar Turbines Incorporated, San Diego, CA, USA; George E. Bache, Advanced Scientific Computing Corp., El Dorado Hills, CA, USA    96-GT-352 
IGTI  1996  Development of a High Specific Speed Centrifugal Compressor  C. Rodgers, Consultant, San Diego, CA, USA    96-GT-353 
IGTI  1996  Investigation of an Aft-Swept, Transonic Compressor Rotor  S.L. Puterbaugh, W.W. Copenhaver, Wright Patterson Laboratory, Wright Patterson AFB, OH, USA; C. Hah, NASA Lewis Research Center, Cleveland, OH, USA; A.J. Wennerstrom, Hot Springs Village, AR, USA    96-GT-354 
IGTI  1996  Measurements of Heat Transfer Coefficients and Friction Factors in Passages Rib-Roughened on All Walls  M.E. Taslim, T. Li, Northeastern University, Boston, MA, USA; S.D. Spring, GE Aircraft Engines, Lynn, MA, USA    96-GT-355 
IGTI  1996  Rib Heat Transfer Coefficient Measurements in a Rib-Roughened Square Passage  G.J. Korotky, M.E. Taslim, Northeastern University, Boston, MA, USA    96-GT-356 
IGTI  1996  CFD-Analysis of Coverplate Receiver Flow  Oliver Popp, Horst Zimmerman, Dr. J. Kutz, Daimler-Benz Aerospace, München, Germany    96-GT-357 
IGTI  1996  Development of Blade Profiles for Low Pressure Turbine Applications  E.M. Curtis, H.P. Hodson, M.R. Banieghbal, J.D. Denton, R.J. Howell, Whittle Laboratory, University of Cambridge, Cambridge, UK; N.W. Harvey, Rolls-Royce Plc, Derby, UK    96-GT-358 
IGTI  1996  The Effect of Vortex Shedding on the Unsteady Pressure Distribution Around the Trailing Edge of a Turbine Blade  G. Cicatelli, C.H. Sieverding, von Karman Institute, Belgium    96-GT-359 
IGTI  1996  Analysis of Instability Inception in High-Speed Multi-Stage Axial-Flow Compressors  Gavin J. Hendricks, Jayant S. Sabnis, Matthew R. Feulner, United Technologies Research Center, East Hartford, CT, USA    96-GT-360 
IGTI  1996  REVAP® Cycle: A New Evaporative Cycle Without Saturation Tower  J. De Ruyck, S. Bram, G. Allard, Vrije Universiteit Brussel, Brussels, Belgium    96-GT-361 
IGTI  1996  Progress on the European Gas Turbine Program - AGATA  Rolf Gabrielsson, Volvo Aero Corporation, Trollhättan, Sweden; Göran Holmqvist, Volvo Aero Turbines, Malmö, Sweden    96-GT-362 
IGTI  1996  An Analysis of Axial Compressors Fouling and a Cleaning Method of their Blading  A.P. Tarabrin, Research Institute, NPO CKTI, St. Petersburg, Russia; V.A. Schurovsky, Gas Research Institute, VNIIGAS, Moscow, Russia; A.I. Bodrov, Institute of Machine Building, PIMACH, St. Petersburg, Russia; J-P. Stalder, Turbotect Ltd., Baden, Switzer    96-GT-363 
IGTI  1996  Rotordynamic Forces due to Turbine Tip Leakage - Part 1: Blade Scale Effects  Seung Jin Song, INHA University, Namgu, Inchon, Korea; Manuel Martinez-Sanchez, MIT, Cambridge, MA, USA    96-GT-364 
IGTI  1996  Rotordynamic Forces due to Turbine Tip Leakage - Part 2: Radius Scale Effects & Experimental Verification  Seung Jin Song, INHA University, Namgu, Inchon, Korea; Manuel Martinez-Sanchez, MIT, Cambridge, MA, USA    96-GT-365 
IGTI  1996  Radial Turbine Development for the 100kW Automotive Ceramic Gas Turbine  Norio Nakazawa, Hiroshi Ogita, Masayuki Takahashi, Takaaki Yoshizawa, Yasumasa Mori, Japan Automobile Research Institute, Incorporated, Tsukuba, Ibaraki, Japan    96-GT-366 
IGTI  1996  Ceramic Gas Turbine Technology Development  M.W. Rettler, M.L. Easley, J.R. Smyth, AlliedSignal Aerospace Company, Phoenix, AZ, USA    96-GT-367 
IGTI  1996  A Viscoplastic Constitutive Theory for Monolithic Ceramics - I  Lesley A Janosik, NASA Lewis Research Center, Cleveland, OH, USA; Stephen F. Duffy, PhD, P.E., Cleveland, OH, USA    96-GT-368 
IGTI  1996  Creep Life of Ceramic Components Using a Finite Element Based Integrated Design Program (CARES/CREEP)  Lynn M. Powers, Cleveland State University, Cleveland, OH, USA; Osama M. Jadaan, University of Wisconsin-Platteville, Platteville, WI, USA; John P. Gyekenyesi, NASA-Lewis Research Center, Cleveland, OH, USA    96-GT-369 
IGTI  1996  Stall Precursor Identification in High Speed Compressor Stages Using Chaotic Time Series Analysis Methods  Michelle M. Bright, NASA Lewis Research Center, Cleveland, OH, USA; Helen K. Qammer, The University of Akron, Akron, OH, USA; Harald J. Weigl, James D. Paduano, Massachusetts Institute of Technology, Cambridge, MA, USA    96-GT-370 
IGTI  1996  Application of a Multi-Block CFD Code to Investigate the Impact of Geometry Modeling on Centrifugal Compressor Flow Field Predictions  Michael D. Hathaway, U.S. Army Vehicle Propulsion Directorate, Cleveland, OH, USA; Jerry R. Wood, NASA Lewis Research Center, Cleveland, OH, USA    96-GT-372 
IGTI  1996  The Effect of Misalignment on Rotor Vibrations  Dr. Jorgen L. Nikolajsen, Staffordshire University, Stafford, England    96-GT-373 
IGTI  1996  Unsteady Flow in Oscillating Turbine Cascade Part 1. Linear Cascade Experiment  L. He, University of Durham, Durham, U.K.    96-GT-374 
IGTI  1996  Unsteady Flow in Oscillating Turbine Cascade Part 2. Computational Study  L. He, University of Durham, Durham, U.K.    96-GT-375 
IGTI  1996  Inlet Distortion Generated Forced Response of a Low Aspect Ratio Transonic Fan  Steven R. Manwaring, Christopher B. Lorence, Aspi R. Wadia, GE Aircraft Engines, Cincinnati, OH, USA; Douglas C. Rabe, Wright Laboratory, Wright-Patterson AFB, OH, USA    96-GT-376 
IGTI  1996  The Effect of Squeeze Film Damper Parameters on the Unbalance Response and Stability of a Flexible Rotor  F. Chu, Tsinghua University, Beijing, China; R. Holmes, University of Southampton, Southampton, UK    96-GT-377 
IGTI  1996  Experience in Full Load Testing Natural Gas Centrifugal Compressors For Rotordynamics Improvements  Alain Gelin, Jean-Marc Pugnet, Daniel Bolusset, Patrick Friez, FRAMATOME Division THERMODYN, Le Creusot, France    96-GT-378 
IGTI  1996  Characterization of Laws of Friction in the Context of Engine Blade Dynamics  A.V. Srinivasan, Worcester Polytechnic Institute, Worcester, MA, USA; D. Michael McFarland, University of Connecticut, Storrs, CT, USA    96-GT-379 
IGTI  1996  Inconel Alloy 783: An Oxidation Resistant, Low Expansion Superalloy for Gas Turbine Applications  K.A. Heck, J.S. Smith, Inco Alloys International, Huntington, WV, USA; R. Smith, Inco Alloys International, Hereford, England    96-GT-380 
IGTI  1996  An Experimental Study of Turbine Vane Heat Transfer with Water-Air Cooling  Nirm V. Nirmalan, John A. Weaver, Larry D. Hylton, Allison Engine Company, Indianapolis, IN, USA    96-GT-381 
IGTI  1996  High Pressure Test Results of a Catalytic Combustor for Gas Turbine  T. Fujii, Y. Ozawa, S. Kikumoto, M. Sato, Central Research Insitute of Electric Power Industry, Yokosuka, Kanagawa, Japan; Y. Yuasa, H. Inoue, Kansai Electric Power Co., Inc., Amagasaki, Hyogo, Japan    96-GT-382 
IGTI  1996  Experimental Investigation of the Liquid Fuel Evaporation in a Premix Duct for Lean Premixed and Prevaporized Combustion  Michael Brandt, Kay O. Gugel, Christoph Hassa, German Aerospace Research Establishment, Köln, Germany    96-GT-383 
IGTI  1996  Optimal Planning of a Super Waste Incineration Cogeneration Plant  Koichi Ito, Ryohei Yokoyama, Osaka Prefecture University, Sakai, Osaka, Japan; Makoto Shimoda, Hitachi, Ltd., Hitachinaka, Ibaraki, Japan    96-GT-384 
IGTI  1996  Creep Performance of Candidate SiC and Si3N4 Materials for Land-Based, Gas Turbine Engine Components  Andrew A. Wereszczak, Timothy P. Kirkland, Oak Ridge National Laboratory, Oak Ridge, TN, USA    96-GT-385 
IGTI  1996  Characterization and Laboratory Simulation of Turbine Airfoil Surface Roughness and Associated Heat Transfer  David G. Bogard, Donald L. Schmidt, The University of Texas at Austin, Austin, TX, USA; Martin Tabbita, Pratt & Whitney, West Palm Beach, FL, USA    96-GT-386 
IGTI  1996  Rotation Effect on Jet Impingement Heat Transfer in Smooth Rectangular Channels with Four Heated Walls and Radially Outward Cross Flow  J.A. Parsons, J.C. Han, Texas A&M University, College Station, TX, USA; C.P. Lee, GE Aircraft Engines, Cincinnati, OH, USA    96-GT-387 
IGTI  1996  Computational Prediction of Heat Transfer to Gas Turbine Nozzle Guide Vanes with Roughened Surfaces  S.M. Guo, T.V. Jones, University of Oxford, Oxford, England; G.D. Lock, University of Bath, Bath, England; S.N. Dancer, Rolls-Royce plc, Derby, England    96-GT-388 
IGTI  1996  Analysis of the Flow in Vaneless Diffusers with Large Width-to-Radius Ratios  Hua-Shu Dou, Shimpei Mizuki, Hosei University, Koganei-city, Tokyo, Japan    96-GT-389 
IGTI  1996  Development of Cobalt Base Superalloy for Heavy Duty Gas Turbine Nozzles  M. Sato, Y. Kobayashi, M. Matsuzaki, K. Shimomura, Tohoku Electric Power Company, Sendai, Miyagi, Japan; T. Shibata, S. Nakamura, Y. Fukui, K. Wada, Hitachi Ltd., Hitachi, Ibaraki, Ja