Search form for published papers in conferences related to rotordynamics.

Provided by Rotating Machinery Analysis, Inc.

Return to www.rotordynamics.org

List of conferences in the data base.

Enter search criteria
Conferences
Paper Title:
Paper Author:
From year:
To year:
Records per page:
Items found: 618 
After performing a search, to obtain a hardcopy of an article or entire proceeding try clicking on the link in the first column, which shows the name of the conference sponsor.
Papers
Conference Year Paper Title Paper Author Page Number Other
IGTI  2002  Anti Fouling Compressor Coating Evaluation on Rolls Royce 501-K Gas Turbines  Daniel E. Caguiat, Naval Surface Warfare Center, Philadelphia, PA, USA     GT-2002-30261 
IGTI  2002  Evaluation of At Sea Tested LM2500 Rainbow Rotor Blade Coatings  Matthew Driscoll, Eric McFetridge, William Arseneau, NAVSEA Philadelphia, Philadelphia, PA, USA     GT-2002-30263 
IGTI  2002  Compressor Fouling Testing on Rolls Royce/Allison 501-K17 and General Electric LM2500 Gas Turbine Engines  Daniel E. Caguiat, David M. Zipkin, Jeffrey S. Patterson, Naval Surface Warfare Center, Philadelphia, PA, USA     GT-2002-30262 
IGTI  2002  Preliminary Gas Turbine Design Using the Multidisciplinary Design System Mopeds  Peter Jeschke, Joachim Kurzke, Reinhold Schaber, Claus Riegler, MTU Aero Engines GmbH, Munich, GERMANY     GT-2002-30496 
IGTI  2002  Performance Modeling Methodology: Efficiency Definitions for Cooled Single and Multistage Turbines  Joachim Kurzke, MTU Aero Engines GmbH, Munich, GERMANY     GT-2002-30497 
IGTI  2002  Computer Based Optimisation and Automation of Analysis and Design Processes in Aero Engine Development  Alexander Karl, Roland Hansen, Michael Pfitzner, Rolls-Royce Deutschland, Dahlewitz, GERMANY     GT-2002-30498 
IGTI  2002  Importance of Inlet Total Pressure Conditions in Evaluating Performance of Non-Symmetric Gas Turbine Exhaust Ducts  M. H. Cunningham, A.M. Birk, Queen's University, Kingston, ON, CANADA; W. Di Bartolomeo, Pratt & Whitney Canada, Longueuil, Quebec, CANADA     GT-2002-30499 
IGTI  2002  A Computer Code for Gas Turbine Engine Weight and Disk Life Estimation  Michael T. Tong, NASA Glenn Research Center, Cleveland, OH, USA; Ian Halliwell, Modern Technologies Corporation, Cleveland, OH, USA; Louis J. Ghosn, Ohio Aerospace Institute, Cleveland, OH, USA     GT-2002-30500 
IGTI  2002  Confidence Intervals for Weibull Fast-Fracture Parameters  Mandar Chati, Curtis Johnson, Ahmet Kaya, General Electric, Niskayuna, NY, USA; Bjoern Schenk, Honeywell Engines, Systems and Services, Phoenix, AZ, USA     GT-2002-30501 
IGTI  2002  Simulating the Failure Behaviour of Ceramic Components Under Gas Turbine Conditions  A. Brückner-Foit, Kassel University, Kassel, GERMANY; P. Hülsmeier, Karlsruhe University, Karlsruhe, GERMANY; E. Diegele, Forschungszentrum Karlsruhe, Karlsruhe, GERMANY; U. Rettig, Siemens ZT MF2, München, GERMANY; C. Hohmann, Siemens KWU, Mülheim, GERMANY     GT-2002-30502 
IGTI  2002  Power Law Versus Exponential Form of Slow Crack Growth of Advanced Structural Ceramics - Dynamic Fatigue  Sung R. Choi, John P. Gyekenyesi, NASA Glenn Research Center, Cleveland, OH, USA     GT-2002-30506 
IGTI  2002  Thermoacoustic Flame Response of Swirl Flames  Werner Krebs, Stefan Hoffmann, Bernd Prade, Siemens AG, Power Generation, Mülheim, GERMANY; Martin Lohrmann, Horst Büchner, Universität Karlsruhe, Karlsruhe, GERMANY     GT-2002-30065 
IGTI  2002  Liquid Fuel Modulation by Fluidic Valve for Active Combustion Control  Fanping Sun, Jeffrey M. Cohen, United Technologies Research Center, East Hartford, CT, USA; Torger J. Anderson, UTC Fuel Cells, South Windsor, CT, USA     GT-2002-30607 
IGTI  2002  Active Control of Combustion Dynamics for Lean Premixed Gas Fired Systems  B. Anson, I. Critchley, J. Schumacher, M.Scott, Honeywell Engines, Phoenix, AZ, USA     GT-2002-30068 
IGTI  2002  Experimental and Numerical Studies of the Velocity Field of a Triple Annular Swirler  Guoqiang Li, Ephraim J. Gutmark, University of Cincinnati, Cincinnati, OH, USA     GT-2002-30069 
IGTI  2002  Dynamic Analysis of Swirl Stabilized Turbulent Gaseous Flames  Vivek K. Khanna, Uri Vandsburger, William R. Saunders, William T. Baumann, Virginia Polytechnic Institute and State University, Blacksburg, VA, USA     GT-2002-30061 
IGTI  2002  Modern Telemetry Systems and Rotating Instrumentation  Andreas Zeisberger, Lutz Matziol, Frank Deubert, MTU Aero Engines GmbH, München, GERMANY     GT-2002-30048 
IGTI  2002  Thermocouple Probes for Accurate Temperature Measurements in Short Duration Facilities  G. Paniagua, R. Dénos, M. Oropesa, von Karman Institute for Fluid Dynamics, Rhode Saint Genèse, BELGIUM     GT-2002-30043 
IGTI  2002  An Optimized Pneumatic Probe for Investigation of Gas Turbine Aerodynamics in Full Scale Gas Turbines  Dieter Warnack, Siemens Power Generation, Berlin, GERMANY     GT-2002-30044 
IGTI  2002  Considerations for Using 3D Pneumatic Probes in High Speed Axial Compressors  Simon Coldrick, Paul Ivey, Cranfield University, Bedford, UK; Roger Wells, Alstom Power Limited, Lincoln, UK     GT-2002-30045 
IGTI  2002  An Air-Cooled Jacket Designed to Protect Unsteady Pressure Transducers at Elevated Temperatures in Gas Turbine Engines  Paul C. Ivey, Cranfield University, Bedfordshire, UK; Derek G. Ferguson, JP Morgan, London, UK     GT-2002-30046 
IGTI  2002  Performance Evaluation of Multi-Stage SOFC and Gas Turbine Combined Systems  Kousuke Nishida, Toshimi Takagi, Shinichi Kinoshita, Osaka University, JAPAN; Tadashi Tsuji, Mitsubishi Heavy Industries, Ltd., Hyogo, JAPAN     GT-2002-30109 
IGTI  2002  Performance Evaluation of Gas Turbine-Fuel Cell Hybrid Micro Generation System  Shinji Kimijima, Nobuhide Kasagi, The University of Tokyo, Tokyo, JAPAN     GT-2002-30111 
IGTI  2002  Assessment of the Potential of Combined Micro Gas Turbine and High Temperature Fuel Cell Systems  Dieter Bohn, Nathalie Pöppe, Aachen University of Technology, Aachen, GERMANY; Joachim Lepers, B&B-AGEMA GmbH, Aachen, GERMANY     GT-2002-30112 
IGTI  2002  Simplified Versus Detailed SOFC Reactor Models and Influence on the Simulation of the Design Point Performance of Hybrid Systems  Loredana Magistri, Riccardo Bozzo, Paola Costamagna, Aristide F. Massardo, University of Genoa, Genoa, ITALY     GT-2002-30653 
IGTI  2002  Investigation of a Fuel Cell-Powered Blended Wing Body Airliner with Boundary Layer Re-Energization  Vassilios A. Pachidis, Riti Singh, Cranfield University, Bedford, UK     GT-2002-30647 
IGTI  2002  Brayton or Brayton-Rankine Combined Cycle with Hot-Gas Recirculation and Inverse Mixing Ejector  Branco Stankovic, Energoprojekt-Entel Co., Belgrade, YUGOSLAVIA     GT-2002-30140 
IGTI  2002  Complex Energy Systems Exploiting Solar Energy and Natural Gas Vaporization  Giacomo Bisio, Allesandro Bosio, Marco Cartesegna, Giuseppe Rubatto, University of Genoa, Genoa, ITALY     GT-2002-30141 
IGTI  2002  Acacia, A Small Scale Nuclear Power Plant with Cogeneration Capabilities  A.I. van Heek, NRG, Petten, THE NETHERLANDS     GT-2002-30512 
IGTI  2002  Degradation Effects on Combined Cycle Power Plant Performance Part 3: Gas and Steam Turbine Degradation Effects  A. I. Zwebek, P. Pilidis, Cranfield University, Bedford, UK     GT-2002-30513 
IGTI  2002  Electric Power Generation Equipment Specification & Supply in the Rapidly Changing Global Regulatory Scene  Lawrence D. Willey, Joel Chalfin, GE Power Systems, Schenectady, NY, USA     GT-2002-30161 
IGTI  2002  Long Term Verification Results & Reliability Improvement of M501G Gas Turbine  A. Maekawa, E. Akita, K. Akagi, K. Uemura, Mitsubishi Heavy Industries, Takasago, JAPAN; Y. Fukuizumi, Mitsubishi Heavy Industries, Yokohama, JAPAN; V. Kallianpur, Mitsubishi Power Systems, Lake Mary, FL, USA     GT-2002-30162 
IGTI  2002  Laser Weld Repair of Service Exposed IN738 and GTD 111 Buckets  Greg Frederick, David Gandy, EPRI, Charlotte, NC, USA; J.T. Stover, Consultant, Columbus, NC, USA     GT-2002-30160 
IGTI  2002  Safety Developments in Gas Turbine Power Applications  Roger C. Santon, Health and Safety Executive, Bootle, ENGLAND; Jasper W. Kidger, Chris J. Lea, Health and Safety Laboratory, Buxton, ENGLAND     GT-2002-30469 
IGTI  2002  A Thermodynamic Analysis of Different Options to Break 60% Electric Efficiency in Combined Cycle Power Plants  Paolo Chiesa, Ennio Macchi, Politecnico di Milano, Milano, ITALY     GT-2002-30663 
IGTI  2002  Evaluation of Pressure Side Film Cooling with Flow and Thermal Field Measurements, Part I: Showerhead Effects  J. Michael Cutbirth, Naval Surface Warfare Center, Memphis, TN, USA; David G. Bogard, University of Texas at Austin, Austin, TX, USA     GT-2002-30174 
IGTI  2002  Evaluation of Pressure Side Film Cooling with Flow and Thermal Field Measurements, Part II: Turbulence Effects  J. Michael Cutbirth, Naval Surface Warfare Center, Memphis, TN, USA; David G. Bogard, University of Texas at Austin, Austin, TX, USA     GT-2002-30175 
IGTI  2002  Leading-Edge Film-Cooling Physics: Part I - Adiabatic Effectiveness  William D.York, James H. Leylek, Clemson University, Clemson, SC, USA     GT-2002-30166 
IGTI  2002  Leading-Edge Film-Cooling Physics: Part II - Heat Transfer Coefficient  William D. York, James H. Leylek, Clemson University, Clemson, SC, USA     GT-2002-30167 
IGTI  2002  Leading-Edge Film-Cooling Physics: Part III - Diffused Hole Effectiveness  William D. York, James H. Leylek, Clemson University, Clemson, SC, USA     GT-2002-30520 
IGTI  2002  Experimental and Numerical Investigation of a Steam-Cooled Vane  Dieter Bohn, Andreas Wolff, Michael Wolff, Aachen University of Technology, Aachen, GERMANY; Karsten Kusterer, B&B-AGEMA, Aachen, GERMANY     GT-2002-30210 
IGTI  2002  Characterization of the Velocity and Heat Transfer Fields in an Internal Cooling Channel with High Blockage Ratio  Luca Casarsa, Murat Cakan, Tony Arts, von Karman Institute for Fluids Dynamics, Rhode Saint Genese, BELGIUM     GT-2002-30207 
IGTI  2002  Heat Transfer Enhancement in Square Ducts with V-Shaped Ribs of Various Angles  Rongguang Jia, Arash Saidi, Bengt Sunden, Lund Institute of Technology, Lund, SWEDEN     GT-2002-30209 
IGTI  2002  Computation of Turbulent Heat Transfer on the Walls of a 180 Degree Turn Channel with a Low Reynolds Number Reynolds Stress Model  D.L. Rigby, QSS, Group Inc., Cleveland, OH, USA; A.A. Ameri, NASA Glenn Research Center, Cleveland, OH, USA; E. Steinthorsson, A&E Consulting Inc., Westlake, OH, USA     GT-2002-30211 
IGTI  2002  Turbulent Heat Transfer Measurements on a Wall with Concave and Cylindrical Dimples in a Square Channel  S.W. Moon, S.C. Lau, Texas A&M University, College Station, TX, USA     GT-2002-30208 
IGTI  2002  Studies on a Blade Leading Edge Separation Bubble Affected by Periodic Wakes: Its Transitional Behavior and Boundary Layer Loss Reduction  K. Funazaki, Y. Kato, Iwate University, Morioka, JAPAN     GT-2002-30221 
IGTI  2002  On the Spreading Angle of Turbulent Spots in Non-Isothermal Boundary Layers with Favourable Pressure Gradients  S. Zhong, T.P. Chong, University of Manchester, Manchester, UK; H.P. Hodson, University of Cambridge, Cambridge, UK     GT-2002-30222 
IGTI  2002  Numerical Analysis of Turbomachinery Flows with Transitional Boundary Layers  P. De Palma, Politecnico di Bari, Bari, ITALY     GT-2002-30223 
IGTI  2002  Separated Flow Transition Under Simulated Low-Pressure Turbine Airfoil Conditions: Part 1 - Mean Flow and Turbulence Statistics  Ralph J. Volino, United States Naval Academy, Annapolis, MD, USA     GT-2002-30236 
IGTI  2002  Separated Flow Transition Under Simulated Low-Pressure Turbine Airfoil Conditions : Part 2 - Turbulence Spectra  Ralph J. Volino, United States Naval Academy, Annapolis, MD, USA     GT-2002-30237 
IGTI  2002  The Method of Harmonic Excitation for Determination of the Flexibility of the Support of Machine's Rotor  Jozef Rybczynski, Polish Academy of Sciences, Gdansk, POLAND     GT-2002-30285 
IGTI  2002  The Identification of the Unbalance of a Flexible Rotating Machine from a Single Run-Down  A.W. Lees, J.K. Sinha, M.I. Friswell, University of Wales, Swansea, UK     GT-2002-30420 
IGTI  2002  Non-Linear Effects of Vibration in Gas Turbine Engines with Two or Three Rotors  J. Pismenny, Y. Levy, Technion, Haifa, ISRAEL     GT-2002-30421 
IGTI  2002  The Effect of Reynolds Number, Compressibility and Free Stream Turbulence on Profile Entropy Generation Rate  Philip C. Griffin, Francis K. O'Donnell, Mark R.D. Davies, Ed Walsh, University of Limerick, Limerick, IRELAND     GT-2002-30330 
IGTI  2002  An Experimental and Computational Study of the Formation of a Streamwise Shed Vortex in a Turbine Stage  Graham Pullan, John Denton, Michael Dunkley, University of Cambridge, Cambridge, UK     GT-2002-30331 
IGTI  2002  Blade Row Interaction in a High Pressure Steam Turbine  V. S. P. Chaluvadi, A. I. Kalfas, H. P. Hodson, Whittle Laboratory, Cambridge University, Cambridge, ENGLAND     GT-2002-30574 
IGTI  2002  Transonic Flow Losses of Two Steam Turbine Blades at Large Incidences  S.-M. Li, T.-L. Chu, Y.-S. Yoo, W.F. Ng, Virginia Polytechnic Institute and State University, Blacksburg, VA, USA     GT-2002-30334 
IGTI  2002  The Effect of Milling Process Induced Coarse Surface Texture on Aerodynamic Turbine Profile Losses  Ulrich G. Harbecke, Walter Riess, Joerg R. Seume, University of Hannover, Hannover, GERMANY     GT-2002-30333 
IGTI  2002  Self-Recirculating Casing Treatment Concept for Enhanced Compressor Performance  Michael D. Hathaway, U.S. Army Research Laboratory, Cleveland, OH, USA     GT-2002-30368 
IGTI  2002  Aerodynamic Design and Performance of Aspirated Airfoils  Ali Merchant, Massachusetts Institute of Technology, Cambridge, MA, USA     GT-2002-30369 
IGTI  2002  Experimental Investigation of an Aspirated Fan Stage  Brian J. Schuler, Jack L. Kerrebrock, Ali Merchant, Massachusetts Institute of Technology, Cambridge, MA, USA     GT-2002-30370 
IGTI  2002  Effects of the Inlet Flow Conditions on the Tip Clearance Flow of an Isolated Compressor Rotor  Holger Brandt, Loenhard Fottner, Universität der Bundeswehr München, Neubiberg, GERMANY; Horst Saathoff, Udo Stark, Technische Universität Braunschweig, Braunschweig, GERMANY     GT-2002-30639 
IGTI  2002  Effects of Co- and Counter-Rotating Inlet Distortions on a 5-Stage HP-Compressor  Thomas Peters, Sulzer Innotec, Winterthur, SWITZERLAND; Leonhard Fottner, Universität der Bundeswehr München, Neubiberg, GERMANY     GT-2002-30395 
IGTI  2002  Investigation of the Response of an Air Blast Atomizer Combustion Chamber Configuration on Forced Modulation of Air Feed at Realistic Operating Conditions  Christoph Hassa, Johannes Heinze, Klaus Stursberg, German Aerospace Center, Köln, GERMANY     GT-2002-30059 
IGTI  2002  Measurements of Equivalence Ratio Fluctuations in a Lean Premixed Prevaporized (LPP) Combustor and Its Correlation to Combustion Instability  Quang-Viet Nguyen, National Aeronautics and Space Administration Glenn Research Center, Cleveland, OH, USA     GT-2002-30060 
IGTI  2002  Background Noise Effects on Combustor Stability  Tim Lieuwen, Georgia Institute of Technology, Atlanta, GA, USA; Andrzej Banaszuk, United Technologies Research Center, East Hartford, CT, USA     GT-2002-30062 
IGTI  2002  Time Domain Simulation of Combustion Instabilities in Annular Combustors  Christian Pankiewitz, Thomas Sattelmayer, Technische Universität München, Garching, GERMANY     GT-2002-30063 
IGTI  2002  Prediction of Combustion Dynamics in a Staged Premixed Combustor  Jeffrey A. Lovett, Kevin T. Uznanski, United Technologies Pratt & Whitney, East Hartford, CT, USA     GT-2002-30646 
IGTI  2002  Low-Order Acoustic Modelling for Annular Combustors: Validation and Inclusion of Modal Coupling  Stéphanie Evesque, Wolfgang Polifke, Technische Universität München, Garching, GERMANY     GT-2002-30064 
IGTI  2002  Innovative Minimally Intrusive Sensor Technology Development for Versatile Affordable Advanced Turbine Engine Combustors  Neil Goldstein, Fritz Bien, Jamine Lee, John Gruniger, Spectral Sciences, Inc., Burlington, MA, USA; Carlos A. Arana, Air Force Research Laboratory, Wright Patterson AFB, OH, USA; Torger Anderson, United Technologies Research Center, E. Hartford, CT, USA; W. Michael Glasheen, AMETEK, Wilmington, MA, USA     GT-2002-30051 
IGTI  2002  Observations of Flame Behavior in a Laboratory-Scale Pre-Mixed Natural Gas/Air Gas Turbine Combustor from PLIF Measurements of OH  Paul O. Hedman, Thomas H. Fletcher, Stewart G. Graham, G. Wayne Timothy, Daniel V. Flores, Jason K. Haslam, Brigham Young University, Provo, UT, USA     GT-2002-30052 
IGTI  2002  Observations of Flame Behavior in a Laboratory-Scale Pre-Mixed Natural Gas/Air Gas Turbine Combustor from LDA Velocity Measurements  Paul O. Hedman, Robert L. Murray, Thomas H. Fletcher, Brigham Young University, Provo, UT, USA     GT-2002-30053 
IGTI  2002  Observations of Flame Behavior in a Laboratory-Scale Pre-Mixed Natural Gas/Air Gas Turbine Combustor from CARS Temperature Measurements  Paul O. Hedman, Daniel V. Flores, Thomas H. Fletcher, Brigham Young University, Provo, UT, USA     GT-2002-30054 
IGTI  2002  Feasibility and Performance of an Ambient Pressure MCFC Combined with a Commercial Gas Turbine  Umberto Desideri, Piero Lunghi, Università di Perugia, Perugia, ITALY; Stefano Ubertini, Università di Roma "Tor Vergata", Roma, ITALY     GT-2002-30650 
IGTI  2002  Dynamic Modeling Results of a 1 MW Molten Carbonate Fuel Cell/Gas Turbine Power Sytem  Eric Liese, Randall S. Gemmen, National Energy Technology Laboratory, Morgantown, WV, USA     GT-2002-30110 
IGTI  2002  Molten Carbonate Fuel Cell Gas Turbine Combined Cycle for Marine Propulsion. Part B: Part Load Operation  Maria-Teresa Basurto, ITP, Industria de TurboPropulsores S.A., Zamudio, SPAIN; Pericles Pilidis, Richard Hales, Cranfield University, Cranfield, UK     GT-2002-30113 
IGTI  2002  Molten Carbonate Fuel Cell Gas Turbine Combined Cycle for Marine Propulsion. Part A: Design Point Operation  Maria-Teresa Basurto, ITP, Industria de TurboPropulsores S.A., Zamudio, SPAIN; Pericles Pilidis, Richard Hales, Cranfield University, Cranfield, UK     GT-2002-30114 
IGTI  2002  Off-Design Performance Analysis of a Hybrid System Based on an Existing MCFC Stack  Pietro Bedont, Ansaldo Fuel Cells, Genova, ITALY; Olivia Grillo, Aristide F. Massardo, Università di Genova, Genova, ITALY     GT-2002-30115 
IGTI  2002  Extrapolation of Compressor Characteristics to the Low-Speed Region for Sub-Idle Performance Modelling  Geoff Jones, Pericles Pilidis, Cranfield University, Cranfield, UK; Barry Curnock, Rolls-Royce plc, Bristol, UK     GT-2002-30649 
IGTI  2002  Film Cooling Effectiveness and Heat Transfer of Rectangular-Shaped Film Cooling Holes  Dong Ho Rhee, Youn Seok Lee, Hyung Hee Cho, Yonsei University, Seoul, KOREA     GT-2002-30168 
IGTI  2002  Film Cooling on a Modern HP Turbine Blade Part I: Experimental & Computational Methodology and Validation  Frederick A. Buck, GE Aircraft Engines, Cincinnati, OH, USA; D. Keith Walters, Jeffrey D. Ferguson, E. Lee McGrath, James H. Leylek, Clemson University, Clemson, SC, USA     GT-2002-30470 
IGTI  2002  Film Cooling on a Modern HP Turbine Blade Part II: Compound-Angle Round Holes  D. Keith Walters, James H. Leylek, Clemson University, Clemson, SC, USA; Frederick A. Buck, GE Aircraft Engines, Cincinnati, OH, USA     GT-2002-30613 
IGTI  2002  Film Cooling on a Modern HP Turbine Blade Part III: Axial Shaped Holes  Jeffrey D. Ferguson, James H. Leylek, Clemson University, Clemson, SC, USA; Frederick A. Buck, GE Aircraft Engines, Cincinnati, OH, USA     GT-2002-30522 
IGTI  2002  Film Cooling on a Modern HP Turbine Blade Part IV: Compound-Angle Shaped Holes  E. Lee McGrath, James H. Leylek, Clemson University, Clemson, SC, USA; Frederick A. Buck, GE Aircraft Engines, Cincinnati, OH, USA     GT-2002-30521 
IGTI  2002  Controlling Secondary-Flow Structure by Leading-Edge Airfoil Fillet and Inlet Swirl to Reduce Aerodynamic Loss and Surface Heat Transfer  T. I-P. Shih, Y.-L. Lin, Michigan State University, East Lansing, MI, USA     GT-2002-30529 
IGTI  2002  Unsteady Rotor Heat Transfer in a Transonic Turbine Stage  F. Didier, R. Dénos, T. Arts, Von Karman Institute for Fluid Dynamics, Rhode Saint Genèse, BELGIUM     GT-2002-30195 
IGTI  2002  Experimentally Aided Development of a Turbine Heat Transfer Prediction Method  A.E. Forest, A.J. Rawlinson, Rolls Royce plc, Derby, UK; C.C. Lai, National Defense University, Taoyuan, TAIWAN; S.M. Guo, M.L.G. Oldfield, University of Oxford, Oxford, UK; G.D. Lock, University of Bath, Bath, UK     GT-2002-30196 
IGTI  2002  Effect of Secondary Flow on Heat Transfer Over a Guide Vane Suction Side  Artem Khalatov, National Academy of Sciences, Kiev, UKRAINE; Sergei Khalatov, The University of Sussex, Brighton, UK; Nick Syred, Phillip Bowen, Cardiff University, Cardiff, UK     GT-2002-30197 
IGTI  2002  St and cf Augmentation for Real Turbine Roughness with Elevated Freestream Turbulence  Jeffrey P. Bons, Air Force Institute of Technology, Wright-Patterson AFB, OH, USA     GT-2002-30198 
IGTI  2002  Enhanced TF40B Gas Turbine Engine Development Program  Roger Yee, Mike Dvornak, Naval Surface Warfare Center, Philadelphia, PA, USA; Lee Myers, CSC, Arlington, VA, USA; Ken Braccio, Honeywell Engines & Systems, Phoenix, AZ, USA     GT-2002-30264 
IGTI  2002  US Navy Development of Air Assist Fuel Nozzle System for the 501K Series Gas Turbine Engines  Matthew G. Hoffman, Dennis M. Russom, Naval Surface Warfare Center, Philadelphia, PA, USA; Richard J. DeCorso, dB Associates, Media, PA, USA     GT-2002-30265 
IGTI  2002  The WR-21 Intercooled Recuperated Gas Turbine Engine - Operation and Integration into the Royal Navy Type 45 Destroyer Power System  Steven J. McCarthy, Ian Scott, Warship Support Agency, Bath, UK     GT-2002-30266 
IGTI  2002  High Capacity and High Efficiency Multi-Stage Air Intake System  Alan Hashem, Dani Fadda, Kenneth J. Fewel, Peerless Mfg. Co., Dallas, TX, USA     GT-2002-30267 
IGTI  2002  Development of the Advanced Cycle Low-Power Gas Turbine Alternator (ACL GTA)  C.R. English, J. Fielder, Future and In Service Gas Turbines, Bath, UK     GT-2002-30268 
IGTI  2002  Gas Turbine Performance Prediction by Using Generalized Performance Curves of Compressor and Turbine Stages  P.R. Spina, DIEM - University of Bologna, Bologna, ITALY     GT-2002-30275 
IGTI  2002  Gas Turbine Health Indices Determination by Using Neural Networks  R. Bettocchi, University of Ferrara, Farrara, ITALY; P.R. Spina, DIEM - University of Bologna, Bologna, ITALY; G. Torella, Italian Air Force Academy, Pozzuoli, ITALY     GT-2002-30276 
IGTI  2002  Measurement of Void Fraction and Pressure Drop of Air-Oil Two-Phase Flow in Horizontal Pipes  J. Pawloski, C. Ching, M. Shoukri, McMaster University, Hamilton, ON, CANADA     GT-2002-30277 
IGTI  2002  On Reducing Piping Vibration Levels - Attacking the Source  Zheji Liu, D. Lee Hill, Dresser-Rand, Olean, NY, USA; Roman Motriuk, TransCanada Pipelines Ltd., Ontario, CANADA     GT-2002-30278 
IGTI  2002  Dynamic Response of a Hydrodynamic Thrust Bearing-Mounted Rotor  T.N. Shiau, K.S. Hsu, National Chung Cheng University, Chia Yi, TAIWAN; J.R. Chang, Nan-Jeon Institute of Technology, Tainan, TAIWAN     GT-2002-30314 
IGTI  2002  Turbomachinery Dual Rotor-Bearing System Analysis  Hsiao-Wei D. Chiang, Chih-Neng Hsu, National Tsing Hua University, Hsinchu, TAIWAN; Wes Jeng, Shun-Hsu Tu, Wei-Chen Li, Asia IC MIC-Process. Inc, Hsinchu, TAIWAN     GT-2002-30315 
IGTI  2002  A Microturbine Rotor-Bearing System Analysis  Hsiao-Wei D. Chiang, Chih-Neng Hsu, National Tsing Hua University, Hsinchu, TAIWAN; Wes Jeng, Shun-Hsu Tu, Wei-Chen Li, Asia IC MIC-Process. INC, Hsinchu, TAIWAN     GT-2002-30316 
IGTI  2002  Dynamic Response of Squeeze Film Dampers Operating with Bubbly Mixtures  Luis San Andrés, Oscar C. De Santiago, Texas A&M University, College Station, TX, USA     GT-2002-30317 
IGTI  2002  Unbalance Response of Rotors Supported on Hydrodynamic Bearings Placed Close to Nodal Points of Excited Vibration Modes  Demetrio C. Zachariadis, Universidade de São Paulo, São Paulo, BRAZIL     GT-2002-30318 
IGTI  2002  Performance Testing of a First and a Second Transonic Turbine Stage  F. Neumayer, H. Jericha, G. Kulhanek, A. Seyr, E. Rossi, W. Sanz, Graz University of Technology, Graz, AUSTRIA     GT-2002-30336 
IGTI  2002  A Design Method for the Profiling of End Walls in Turbines  Jonathan Hartland, Jaguar Cars Ltd., Coventry, UK; David Gregory-Smith, University of Durham, Durham, UK     GT-2002-30433 
IGTI  2002  Aerodynamic Perfromance in a Turbine Vane Cascade  R.J. Boyle, B.L. Lucci, NASA Glenn Research Center, Cleveland, OH, USA; R.G. Senyitko, QSS Group, Inc., Cleveland, OH, USA     GT-2002-30434 
IGTI  2002  Wake, Shock and Potential Field Interactions in a 1.5 Stage Turbine: Part I: Vane-Rotor and Rotor-Vane Interaction  R.J. Miller, University of Cambridge, Cambridge, UK; R.W. Moss, University of Newcastle, Newcastle, UK; R.W. Ainsworth, University of Oxford, Oxford, UK; N.W. Harvey, Rolls Royce plc., Derby, UK     GT-2002-30435 
IGTI  2002  Wake, Shock and Potential Field Interactions in a 1.5 Stage Turbine: Part II: Vane-Vane Interaction and Discussion of Results  R.J. Miller, University of Cambridge, Cambridge, UK; R.W. Moss, University of Newcastle, Newcastle, UK; R.W. Ainsworth, University of Oxford, Oxford, UK; N.W. Harvey, Rolls Royce plc., Derby, UK     GT-2002-30436 
IGTI  2002  Effects of Riblets on the Loss Behavior of a Highly Loaded Compressor Cascade  Matthias Boese, Leonhard Fottner, Universität der Bundeswehr München, Neubiberg, GERMANY     GT-2002-30438 
IGTI  2002  Time Resolved Measurements in an Annular Compressor Cascade with High Aerodynamic Loading  Jörg Weidenfeller, Martin Lawerenz, University of Kassel, Kassel, GERMANY     GT-2002-30439 
IGTI  2002  Influence of Endwall Contouring on the Transonic Flow in a Compressor Blade  M. Hoeger, MTU Aero Engines, München, GERMANY; P. Cardamone, L. Fottner, Universität der Bundeswehr, München, Neubiberg, GERMANY     GT-2002-30440 
IGTI  2002  Low Speed Studies of Swept and Dihedral Effects on Compressor Cascades  Bhaskar Roy, P.A. Laxmiprasanna, Vishal Borikar, Amit Batra, IIT Bombay, Mumbai, INDIA     GT-2002-30441 
IGTI  2002  Influencing the Secondary Losses in Compressor Cascades by a Leading Edge Bulb Modification at the Endwall  R. Müller, H. Sauer, K. Vogeler, Dresden University of Technology, Dresden, GERMANY; M. Hoeger, MTU Munich, Munich, GERMANY     GT-2002-30442 
IGTI  2002  Preliminary Design of Ceramic Components for the ST5+ Advanced Microturbine Engine  Jun Shi, Venkata R. Vedula, John Holowczak, Connie E. Bird, S. Scott Ochs, Luca Bertuccioli, David J. Bombara, United Technologies Research Center, East Hartford, CT, USA     GT-2002-30547 
IGTI  2002  Feasibility of a High-Temperature Polymer-Derived-Ceramic Turbine Fabricated Through Micro-Stereolithography  C. Walsh, L. An, J.S. Kapat, L.C. Chow, University of Central Florida, Orlando, FL, USA     GT-2002-30548 
IGTI  2002  Volumetric X-Ray Imaging for Ceramic Microturbine Rotors  W. A. Ellingson, E. R. Koehl, J. Stainbrook, Argonne National Laboratory, Argonne, IL, USA; M. Rivers, University of Chicago, Chicago, IL, USA     GT-2002-30549 
IGTI  2002  History of Development and Refinement of Gas-Static Bearings for Metal-Ceramic Gasgenerator of 2.5 MW Power  A.V. Soudarev, V.Ya. Podgorets, A.A. Souryaninov, A.S. Molchanov, Joint-Stock Company "TEDVIC", St. Petersburg, RUSSIA     GT-2002-30545 
IGTI  2002  Co-gasification Study and Optimisation of Coal, Biomass, and Plastics Waste Mixtures  Rui Neto André, Filomena Pinto, Carlos Franco, Celestino Tavares, Mário Dias, I. Gulyurtlu, I. Cabrita, INETI, Lisboa, PORTUGAL    GT-2002-30011 
IGTI  2002  MBM (Meat and Bone Meal) Co-Gasification in IGCC Technology  Francisco García-Peña, Alejandro Muñoz-Mozos, Pedro Casero-Cabezón, ELCOGAS, Puertollano, SPAIN    GT-2002-30010 
IGTI  2002  Feedstock Blending of Domestic Fuels in Gasifier/Liquifiers  Alex E.S. Green, M.S. Sankar, University of Florida, Gainesville, FL, USA; P. Venkatachalam, Tamil Nadu Agricultural University, Coimbatore, INDIA    GT-2002-30009 
IGTI  2002  Equipment of a Sister Ship of Air Craft Carrier "Charles de Gaulle" with 2 HTR Nuclear Reactor Instead of the Actual Two PWR - Preliminary Study - Main Results  Charles Fribourg, Technicatome, Gif sur Yvette CEDEX, FRANCE    GT-2002-30144 
IGTI  2002  Simulation Investigation of Control Options for Full Load Rejection in the PBMR Closed Cycle Gas Turbine Power Plant  Barend W. Botha, Pieter G. Rousseau, Potchefstroom University for CHE, Potchefstroom, SOUTH AFRICA    GT-2002-30145 
IGTI  2002  HTGR Closed Cycle GT Plant Analysis: Options and Procedures for Startup with Hot Gas Injection  K.N. Pradeep Kumar, A. Tourlidakis, P. Pilidis, Cranfield University, Cranfield, UK    GT-2002-30146 
IGTI  2002  Economic Feasibility of Fast Nuclear-Power Merchant Ships  Dmitry V. Paramonov, Westinghouse Electric Company, Pittsburgh, PA, USA    GT-2002-30147 
IGTI  2002  Design and Economics of the HTGR-GT Power Plant  JAERI Yasushi Muto, Shintaro Ishiyama, Shusaku Shiozawa, Japan Atomic Energy Research Institute, Oarai, JAPAN; Masanori Tanihira, Mitsubishi Heavy Industries, Ltd., Yokohama, JA    GT-2002-30148 
IGTI  2002  Small-Scale Well-Proven Inherently Safe Nuclear Power Conversion   G.A.K. Crommelin, Voorschoten, NETHERLANDS    GT-2002-30509 
IGTI  2002  Nuclear Gas Turbine Small-Scale Inherently Safe Well-Proven Nuclear Power  H. van Dam, T.H.J.J. van der Hagen, Delft University of Technology, Delft, NETHERLANDS    GT-2002-30510 
IGTI  2002  Versatile Heat Source for Nuclear Gas Turbine and Hydrogen Production Facility  Colin F. McDonald, McDonald Thermal Engineering, La Jolla, CA, USA    GT-2002-30511 
IGTI  2002  Film Cooling Experiments with Flow Introduced Upstream of a First Stage Nozzle Guide Vane through Slots of Various Geometries  Rohit A. Oke, Siemens Wesinghouse Power Corporation, Orlando, FL, USA; Terrence W. Simon, University of    GT-2002-30169 
IGTI  2002  Free-Stream Turbulence Effects on Film Cooling with Shaped Holes  Christian Saumweber, Achmed Schulz, Sigmar Wittig, Universität Karlsruhe, Karlsruhe, GERMANY    GT-2002-30170 
IGTI  2002  Numerical Investigation of Internal Crossflow Film Cooling  P. Adami, F. Martelli, F. Montomoli, University of Florence, Florence, ITALY; C. Saumweber, Universität Karlsruhe, Karlsruhe, GERMANY    GT-2002-30171 
IGTI  2002  The Effect of Freestream Turbulence on Film Cooling Adiabatic Effectiveness  James E. Mayhew, Rose-Hulman Institute of Technology, Terre Haute, IN, USA; James W. Baughn, University of California, Davis, CA, USA; Aaron R. Byerley,    GT-2002-30172 
IGTI  2002  The Effect of Freestream Turbulence on Film Cooling Heat Transfer Coefficient  James E. Mayhew, Rose-Hulman Institute of Technology, Terre Haute, IN, USA; James W. Baughn, University of California, Davis, CA, USA; Aaron R. Byerley    GT-2002-30173 
IGTI  2002  The Measurement of Full-Surface Internal Heat Transfer Coefficients for Turbine Airfoils Using a Non-Destructive Thermal Inertia Technique  Nirm V. Nirmalan, Ronald S. Bunker, Carl R. Hedlund, General Electric Company, Niskayuna,    GT-2002-30199 
IGTI  2002  Computational Analysis of Pitch-Width Effects on the Secondary Flows of Turbine Blades  C. Xu, B. Marini, Siemens Westinghouse Power Co., Orlando, FL, USA; R.S. Amano, University of Wisconsin, Milwaukee, WI, USA    GT-2002-30200 
IGTI  2002  An Experimental Investigation on the Influence of Periodic Unsteady Inflow Conditions on Leading Edge Film Cooling  Stefan Wolff, Leonhard Fottner, Universität der Bundeswehr München, Neubiberg, GERMANY; Sabine Ardey, MTU Aero E    GT-2002-30202 
IGTI  2002  LES Simulation and Experimental Measurement of Fully Developed Ribbed Channel Flow and Heat Transfer  Kazunori Watanabe, Toshihiko Takahashi, Central Research Institute of Electric Power Industry, Yokosuka, JAPAN    GT-2002-30203 
IGTI  2002  A Model for Diffusion of Turbulent Kinetic Energy for Calculation of Momentum and Heat Transfer in High FST Flows  Savas Yavuzkurt, The Pennsylvania State University, University Park, PA, USA; Ganesh R. Iyer, Caterpillar Inc., Peo    GT-2002-30204 
IGTI  2002  Genetic Optimization of Steam Injected Gas Turbine Power Plants  Ibrahim Sinan Akmandor, Özhan Öksüz, Melih Han Bilgin, Middle East Technical University, Ankara, TURKEY; Seçkin Gökaltun, Zorlu O&M, Istanbul, TURKEY    GT-2002-30416 
IGTI  2002  Microturbines and Trigeneration: Optimization Strategies and Multiple Engine Configuration Effects  Stefano Campanari, Luca Boncompagni, Ennio Macchi, Politecnico di Milano, Milano, ITALY    GT-2002-30417 
IGTI  2002  Pre-Design Studies of Cycles with Energy, Exergy, Thermoeconomy and ELCA Analysis  Ahmad R. Azimian, Isfahan University of Technology, Isfahan, IRAN; Pernilla L. Olausson, Mohsen Assadi, Lund Institute of Technology, Lund, SWEDEN    GT-2002-30418 
IGTI  2002  Cogenerative BAGT Performance with Variable Thermal Power  M. Bianchi, G. Negri di Montenegro, A. Peretto, DIEM - University of Bologna, Bologna, ITALY    GT-2002-30557 
IGTI  2002  A Feasibility Study of Existing Gas Turbines for Recuperated, Intercooled and Reheat  Cycle R. Bhargava, Universal Ensco, Inc., Houston, TX, USA; M. Bianchi, A. Peretto, P.R. Spina, University of Bologna, Bologna, ITALY    GT-2002-30558 
IGTI  2002  Probabilistic Study of Fluid Structure Interaction  Rama S.R. Gorla, Cleveland State University, Cleveland, OH, USA; Shantaram S. Pai, Jeffrey J. Rusick, NASA Glenn Research Center, Cleveland, OH, USA    GT-2002-30308 
IGTI  2002  Robust Optimal Positioning of Strain Gauges on Blades  Marc P. Mignolet, Arizona State University, Tempe, AZ, USA; Byeong-Keun Choi, Gyeongsang National University, Tongyoung, KOREA    GT-2002-30454 
IGTI  2002  Eigen Solutions of an Orthotropy Composite Blade Solved by the Differential Quadrature  Method J.H. Kuang, M.H. Hsu, National Sun Yat-Sen University, Kaohsiung, TAIWAN    GT-2002-30423 
IGTI  2002  Predicting Engine Whirl Instability Via Equivalent 2D Mechanisms   Nicholas Klompas, Waterford, NY, USA    GT-2002-30422 
IGTI  2002  An Improved Turbulence Closure Model Using Cabot's Near-Wall Function  H.Y. Tan, H.N. Lim, Defence Science & Technology Agency, RSAF, SINGAPORE; E.Y.K. Ng, Nanyang Technological University, SINGAPORE; D. Choi, United Technologi    GT-2002-30679 
IGTI  2002  Application of Reduced-Order Aerodynamic Modeling to the Analysis of Structural Uncertainty in Bladed Disks  K. Willcox, J. Peraire, Massachusetts Institute of Technology, Cambridge, MA, USA    GT-2002-30680 
IGTI  2002  Orthogonal Shape Functions and Progressive Optimization for the Design of 2D Transonic Cascades  L.A. Catalano, A. Dadone, Politecnico di Bari, Bari, ITALY    GT-2002-30678 
IGTI  2002  Performance Evaluation of an Internal Flow Navier-Stokes Solver for Compressible Viscous Flow Simulations  H. Tugrul Tinaztepe, ROKETSAN Engineering & Development Group, Ankara, TURKEY; Ahmet S. Üçer, I. Sinan Akamandor, Middle Ea    GT-2002-30681 
IGTI  2002  Semi-Unstructured Grid Methods for Turbomachinery Applications  J. Contreras, R. Corral, J. Fernandez-Castañeda, G. Pastor, C. Vasco, Industria de TurboPropulsores, S.A., Madrid, SPAIN    GT-2002-30572 
IGTI  2002  An Entropic Minimization Technique for Turbine Blade Profiles  Ed Walsh, Mark Davies, University of Limerick, IRELAND; Roy Myose, Wichita State University, Wichita, KS, USA    GT-2002-30346 
IGTI  2002  Experimental Investigation of Turbine Wake Flow by Interferometrically Triggered PIV & LDV Measurements  J. Woisetschläger, N. Mayrhofer, H. Lang, B. Hampel, Graz University of Technology, Graz, AUSTRIA    GT-2002-30347 
IGTI  2002  Using Gurney Flaps to Control Laminar Separation on Linear Cascade Blades  Aaron R. Byerley, USAF Academy, Colorado Springs, CO, USA; Oliver Störmer, Jörg List, Bundesamt fur Wehrtechnik und Beschaffung, Manching, GERMANY; James W    GT-2002-30662 
IGTI  2002  Simulation of the Interaction of Labyrinth Seal Leakage Flow and Main Flow in an Axial Turbine  Jan E. Anker, Jürgen F. Mayer, University of Stuttgart, Stuttgart, GERMANY    GT-2002-30348 
IGTI  2002  Numerical Investigation of the Effect of Ash Particle Deposition on the Flow Field Through Turbine Cascades  Hesham El-Batsh, Hermann Haselbacher, Vienna University of Technology, Vienna, AUSTRIA    GT-2002-30600 
IGTI  2002  Evolution of Upstream Propagating Shock Waves from a Transonic Compressor Rotor  Anil Prasad, Pratt and Whitney Aircraft Engines, East Hartford, CT, USA    GT-2002-30356 
IGTI  2002  Experimental Investigation of Unsteady Flow Field Within a Two Stage Axial Turbomachine Using Particle Image Velocimetry  Oguz Uzol, Yi-Chih Chow, Joseph Katz, Charles Meneveau, Johns Hopkins University, Baltimore, MD, USA    GT-2002-30664 
IGTI  2002  Flow Non-Uniformities and Turbulent "Hot Spots" Due to Wake-Blade and Wake-Wake Interactions in a Multistage Turbomachine  Yi-Chih Chow, Oguz Uzol, Joseph Katz, Johns Hopkins University, Baltimore, MD, USA    GT-2002-30667 
IGTI  2002  Analysis of Rotor-Rotor and Stator-Stator Interferences in Multi-Stage Turbomachines  L. He, T. Chen, University of Durham, Durham, UK; R.G. Wells, Y.S. Li, W. Ning, ALSTOM Power, Lincoln, UK    GT-2002-30355 
IGTI  2002  Effect of Upstream Unsteady Flow Conditions on Rotor Tip Leakage Flow  Borislav T. Sirakov, Choon S. Tan, MIT Gas Turbine Laboratory, Cambridge, MA, USA    GT-2002-30358 
IGTI  2002  High Performance and Cost Effective Recuperator for Micro-Gas Turbines  Gunnar Lagerström, Max Xie, Rekuperator Svenska AB, Malmö, SWEDEN    GT-2002-30402 
IGTI  2002  A Preliminary Study of an Inter-Cooled and Recuperative Microgasturbine Below 300 kW  Kenjiro Takase, Hideo Furukawa, Toyo Radiator Co., Ltd., Tokyo, JAPAN; Kimiaki Nakano, Toyo Radiator Co., Ltd., Hadano, Kanagawa, JAPAN    GT-2002-30403 
IGTI  2002  Test Facility for Screening and Evaluating Candidate Materials for Advanced Microturbine Recuperators  Edgar Lara-Curzio, P.J. Maziasz, B.A. Pint, Oak Ridge National Laboratory, Oak Ridge, TN, USA; Matt Stewart, Doug Hamrin, Natha    GT-2002-30581 
IGTI  2002  The Effect of Water Vapor on Oxidation Performance of Alloys Used in Recuperators  Bruce A. Pint, Karren L. More, Peter F. Tortorelli, Oak Ridge National Laboratory, Oak Ridge, TN, USA    GT-2002-30543 
IGTI  2002  Experiments in Active Stall Control of a Twin-Spool Turbofan Engine  Dirk C. Leinhos, Stephan G. Scheidler, Leonhard Fottner, Universität der Bundeswehr, München, GERMANY; Frank Grauer, MTU Aero Engines, München, GERMANY; Jakob He    GT-2002-30002 
IGTI  2002  F-22/F119 Propulsion System Ground and Flight Test Analysis Using Modeling and Simulation Techniques  Donald J. Malloy, Sverdrup Technology, Inc., Arnold Air Force Base, TN, USA; Allan T. Webb, David S. Kidman, Air Force Flight    GT-2002-30001 
IGTI  2002  Improved Methodology for Turbine Engine Emission Measurements  Paul A. Jalbert, Vincent A. Zaccardi, Jacobs/Sverdrup, AEDC Group, Arnold Air Force Base, TN, USA    GT-2002-30606 
IGTI  2002  A Flight Simulation Vision for Aeropropulsion Altitude Ground Test Facilities  Milt Davis, Peter Montgomery, Sverdrup Technology, Inc., Arnold Air Force Base, TN, USA    GT-2002-30003 
IGTI  2002  Evolution of a Turbine Engine Test Facility to Meet the Test Needs of Future Aircraft Systems  Peter Montgomery, Rick Burdette, Jason Klepper, Al Milhoan, Sverdrup Technology, Inc., Arnold Air Force Base, TN, USA    GT-2002-30605 
IGTI  2002  Integral Textile Ceramic Composites for Turbine Engine Combustors  B. N. Cox, J.B. Davis, D.B. Marshall, Q.D. Yang, Rockwell Scientific, Thousand Oaks, CA, USA    GT-2002-30056 
IGTI  2002  The Evaluation of CFCC Liners After Field Testing in a Gas Turbine - III  Narendernath Miriyala, Josh Kimmel, Jeffrey Price, Solar Turbines Incorporated, San Diego, CA, USA; Karren More, Peter Tortorelli, Oak Ridge National Labora    GT-2002-30585 
IGTI  2002  Characterization and Nozzle Test Experience of a Self Sealing Ceramic Matrix Composite for Gas Turbine Applications  Eric P. Bouillon, G. Habarou, Patrick C. Spriet, SNECMA Moteurs, Bordeaux, FRANCE; Jean L. Lecordix, SNECMA Moteu    GT-2002-30458 
IGTI  2002  Characterization of Ceramic Matrix Composite Fasterners Exposed in a Combustor Liner Rig Test  Michael Verrilli, David Brewer, NASA Glenn Research Center, Cleveland, OH, USA    GT-2002-30459 
IGTI  2002  Ceramic Matrix Composite Material in Highly Loaded Journal Bearings  M. Leuchs, A. Mühlratzer, MAN Technologie AG, Augsburg, GERMANY    GT-2002-30460 
IGTI  2002  Integrating the Staged Prevaporizer-Premixer Into Gas Turbine Cycles  J. S. Campbell, Jr., P. C. Malte, S. de Bruyn Kops, I. Novosselov, University of Washington, Seattle, WA, USA; John C. Y. Lee, Solar Turbines, Inc., San Diego,    GT-2002-30081 
IGTI  2002  High Power Density Silicon Combustion Systems for Micro Gas Turbine Engines  C. M. Spadaccini, J. Lee, S. Lukachko, I. A. Waitz, Massachusetts Institute of Technology, Cambridge, MA, USA; A. Mehra, D-STAR Engineering Corp., Shelto    GT-2002-30082 
IGTI  2002  Advanced Catalytic Pilot for Low NOx Industrial Gas Turbines  Hasan Karim, Kent Lyle, Shahrokh Etemad, Lance Smith, William Pfefferle, Precision Combustion Inc., North Haven, CT, USA; Partha Dutta, Kenneth Smith, Solar Turbines In    GT-2002-30083 
IGTI  2002  The Development of the Ramgen Engine Combustion System Blake  C. Chenevert, Donald W. Kendrick, Ben Trueblood, Jon Tonouchi, Shawn P. Lawlor, Robert C. Steele, Ramgen Power Systems, Bellevue, WA, USA    GT-2002-30084 
IGTI  2002  Two-Dimensional Flow and NOx Emissions in Deflagrative Internal Combustion Wave Rotor Configurations  Razi Nalim, Kerem Pekkan, Indiana University-Purdue University, Indianapolis, IN, USA    GT-2002-30085 
IGTI  2002  Nonlinear Gas Turbine Modeling Using Feedforward Neural Networks  Neophytos Chiras, Ceri Evans, David Rees, University of Glamorgan, Pontypridd, UK    GT-2002-30035 
IGTI  2002  A Model-Based Controller for Commercial Aero Gas Turbines  Arkadiy Turevskiy, Pratt & Whitney, East Hartford, CT, USA; Richard Meisner, Meisner Engineering, Glastonbury, CT, USA; Robert H. Luppold, Luppold & Associates, Inc., West    GT-2002-30041 
IGTI  2002  A High-Fidelity Real-Time Simulation Code of Gas Turbine Dynamics for Control Applications  S.M. Camporeale, B. Fortunato, M. Mastrovito, Politecnico di Bari, Bari, ITALY    GT-2002-30039 
IGTI  2002  Application of Markov Chains to Identification of Turbine Engine Dynamic Models  V.Yu. Arkov, Russian Academy of Sciences, Ufa, RUSSIA; G.G. Kulikov, Ufa State Aviation Technical University, Ufa, RUSSIA; T.V.Breikin, University of    GT-2002-30038 
IGTI  2002  Semi-Closed Cycle O2/CO2 Combustion Gas Turbines: Influence of Fluid Properties on the Aerodynamic Performance of the Turbomachinery  S.K. Roberts, S.A. Sjolander, Carleton University, Ottawa, ON, CANADA    GT-2002-30410 
IGTI  2002  Exergy Analysis of Gas-Turbine Combined Cycle with CO2 Capture Using Pre-Combustion Decarbonization of Natural Gas  Hanne M. Kvamsdal, SINTEF Energy Research, Trondheim, NORWAY; Ivar S. Ertesvåg, Olav Bolland, Tor Tolstad, Norwegi    GT-2002-30411 
IGTI  2002  Some Unconventional Aero Gas Turbines Using Hydrogen Fuel  Stefano Boggia, Anthony Jackson, Cranfield University, Cranfield, UK    GT-2002-30412 
IGTI  2002  The Effects of Incondensable Gases on H2/O2 Cycle Performance  M. Gambini, GL. Guizzi, M. Vellini, University of Rome "Tor Vergata", Rome, ITALY    GT-2002-30413 
IGTI  2002  The Employment of Hydrogenated Fuels from Natural Gas Reforming: Gas Turbine and Combustion Analysis  Fabio Bozza, Maria Cristina Cameretti, Raffaele Tuccillo, Università di Napoli Federico II, Napoli, ITALY    GT-2002-30414 
IGTI  2002  Film Cooling: a Comparative Study of Different Heater-Foil Configurations for Liquid Crystals Experiments  G. Vogel, A. Graf, Swiss Federal Institute of Technology, Lausanne, SWITZERLAND; B. Weigand, University of Stuttgart, Stutt    GT-2002-30552 
IGTI  2002  Assesment of Various Film Cooling Configurations Including Shaped and Compound Angle Holes Based on Large Scale Experiments  J. Dittmar, A. Schulz, S. Wittig, Universität Karlsruhe, Karlsruhe, GERMANY    GT-2002-30176 
IGTI  2002  Flow Visualisation of a Converging Slot-Hole Film-Cooling Geometry  J.E. Sargison, University of Tasmania, Tasmania, AUSTRALIA; S.M. Guo, M.L.G. Oldfield, University of Oxford, Oxford, UK; G.D. Lock, University of Bath, Bath, UK;    GT-2002-30177 
IGTI  2002  Film Cooling Effectiveness Due to Discrete Holes within Transverse Surface Slot  Ronald S. Bunker, General Electric Corp. R&D Center, Schenectady, NY, USA    GT-2002-30178 
IGTI  2002  Numerical Assessment of Different Turbulence Models for Slot Jet Impinging on Flat and Concave Surfaces  Rongguang Jia, Masoud Rokni, Bengt Sundén, Lund Institute of Technology, Lund, SWEDEN    GT-2002-30449 
IGTI  2002  Local Heat Transfer and Flow Distributions for Impinging Jet Arrays of Dense and Sparse Extent  J.C. Bailey, R.S. Bunker, General Electric Company, Niskayuna, NY, USA    GT-2002-30473 
IGTI  2002  Flow and Heat (Mass) Transfer Characteristics in an Impingement/Effusion Cooling System with Crossflow Dong  Ho Rhee, Jong Hyun Choi, Hyung Hee Cho, Yonsei University, Seoul, KOREA    GT-2002-30474 
IGTI  2002  Mist/Steam Heat Transfer with Jet Impingement onto a Concave Surface  Xianchang Li, J. Leo Gaddis, Clemson University, Clemson, SC, USA; Ting Wang, University of New Orleans, New Orleans, LA, USA    GT-2002-30475 
IGTI  2002  Experimental Racetrack Shaped Jet Impingement on a Roughened Leading-Edge Wall with Film Holes  M.E. Taslim, Y. Pan, K. Bakhtari, Northeastern University, Boston, MA, USA    GT-2002-30477 
IGTI  2002  A Prediction Method for the Local Entropy Generation Rate in a Transitional Boundary Layer with a Free Stream Pressure Gradient  Ed Walsh, Mark Davies, University of Limerick, Limerick, IRELAND; Roy Myose, Wichita State University    GT-2002-30231 
IGTI  2002  Measurements of the Effects of Freestream Turbulence on Separation-Bubble Transition  M.I. Yaras, Carleton University, Ottawa, CANADA    GT-2002-30232 
IGTI  2002  An Investigation of the Scales in Transitional Boundary Layers Under High Free-Stream Turbulence Conditions  Ralph J. Volino, United States Naval Academy, Annapolis, MD, USA    GT-2002-30233 
IGTI  2002  The Nonstationary Behaviour of Stator Profile Boundary Layer Excited by Periodic Upstream Wakes  Witold Elsner, Drobniak Stanislaw, Technical University of Czestochowa, Czestochowa, Poland    GT-2002-30234 
IGTI  2002  Predicting Transition Without Empiricism or DNS   Mark W. Johnson, University of Liverpool, Liverpool, UK    GT-2002-30238 
IGTI  2002  Operational Experience with Internal Coatings in Aero- and Industrial Gas Turbine Airfoils  G. A. Kool, National Aerospace Laboratory NLR, Emmeloord, THE NETHERLANDS; K.S. Agema, KEMA, Arnhem, THE NETHERLANDS; J.P. van Buijtenen,    GT-2002-30591 
IGTI  2002  Intrinsic and Extrinsic Variable Effects on Thermal Barrier Coatings Life  Zaher Mutasim, Solar Turbines, Incorporated, San Diego, CA, USA    GT-2002-30273 
IGTI  2002  Development of Operating Temperature Prediction Method Using Thermophysical Properties Change of TBC  Tomoharu Fujii, Takeshi Takahashi, Central Research Institute of Electric Power Industry, Yokosuka, JAPAN    GT-2002-30274 
IGTI  2002  Forced Response Experiments in a High Pressure Turbine Stage  Holger Hennings, German Aerospace Center, Göttingen, GERMANY; Robert Elliot, Rolls-Royce plc, Derby, GREAT BRITAIN    GT-2002-30453 
IGTI  2002  Calculation and Correlation of the Unsteady Flowfield in a High Pressure Turbine  Milind A. Bakhle, Theo G. Keith, Jr., University of Toledo, Toledo, OH, USA; Jong S. Liu, Josef Panovsky, Honeywell Engines, Systems and Services, P    GT-2002-30322 
IGTI  2002  Investigation of Unsteady Aerodynamic Blade Excitation Mechanisms in Transonic Turbine Stages  Björn Laumert, Torsten H. Fransson, KTH-The Royal Institute of Technology, Stockholm, SWEDEN; Hans Mårtensson, Volvo Aero Corporation,    GT-2002-30450 
IGTI  2002  Using CFD to Reduce Resonant Stresses on a Single-Stage, High-Pressure Turbine Blade  J.P. Clark, A.S. Aggarwala, M.A. Velonis, R.E. Gacek, S.S. Magge, F.R. Price, United Technologies Pratt & Whitney, East Hartford, CT, USA    GT-2002-30320 
IGTI  2002  Effects of Blade Count on Three-bladerow Interaction in a Transonic Turbine  H.D. Li, L. He, University of Durham, Durham, U.K.    GT-2002-30310 
IGTI  2002  Radial Impeller Forces Using CFD Part I: Model Development and Validation  Daniel O. Baun, Concepts NREC, White River Junction, VT, USA; Ronald D. Flack, University of Virginia, Charlottesville, VA, USA    GT-2002-30377 
IGTI  2002  Radial Impeller Forces Using CFD Part II: A Comparison Between Compressible and Incompressible Flows  Daniel O. Baun, Concepts NREC, White River Junction, VT, USA; Ronald D. Flack, University of Virginia, Charlottesville, VA, USA    GT-2002-30378 
IGTI  2002  Backward Traveling Rotating Stall Waves in Centrifugal Compressors  Z.S. Spakovsky, Massachusettes Institue of Technology, Cambridge, MA, USA    GT-2002-30379 
IGTI  2002  A Study on Impeller-Diffuser Interaction: Part I - Influence on the Performance  Kai U. Ziegler, Heinz E. Gallus, Reinhard Niehuis, Rheinisch-Westfälische Technische Hochschule Aachen, Aachen, GERMANY    GT-2002-30381 
IGTI  2002  A Study on Impeller-Diffuser Interaction: Part II - Detailed Flow Analysis  Kai U. Ziegler, Heinz E. Gallus, Reinhard Niehuis, Rheinisch-Westfälische Technische Hochschule Aachen, Aachen, GERMANY    GT-2002-30382 
IGTI  2002  The Effects of Wake-Passing Unsteadiness Over a Highly-Loaded Compressor-Like Flat Plate  Xavier Ottavy, Stephane Vilmin, Maciek Opoka, Howard Hodson, Cambridge University, Cambridge, UK; Simon Gallimore, Rolls-Royce, Derby, UK    GT-2002-30354 
IGTI  2002  Validation of a Three Dimensional Linearized Euler Analysis for Classical Wake/Stator Interactions  Dilip Prasad, Pratt & Whitney Aircraft Engines, East Hartford, CT, USA; Joseph M. Verdon, Ohio Aerospace Institute, Cleveland, OH,    GT-2002-30400 
IGTI  2002  Predicting Bladerow Interactions Using a Multistage Time-Linearized Navier-Stokes Solver  W. Ning, Y.S. Li, R.G. Wells, ALSTOM Power, Lincoln, UK    GT-2002-30309 
IGTI  2002  Acoustically-Induced Structural Fatigue of Impeller Discs - A Brief Note  Frantisek L. Eisinger, Robert E. Sullivan, Foster Wheeler Energy Corporation, Clinton, NJ, USA    GT-2002-30604 
IGTI  2002  Effects of Flow Control on Forced Response and Performance of a Transonic Compressor  S. Todd Bailie, Wing F. Ng, Alfred L. Wicks, Virginia Polytechnic Institute and State University, Blacksburg, VA, USA; William W. Copenhaver, U.    GT-2002-30008 
IGTI  2002  An Engine Research Program Focused on Low Pressure Turbine Aerodynamic Performance  Raymond Castner, John Adamczyk, NASA Glenn Research Center, Cleveland, OH, USA; Santo Chiappetta, John Wyzykowski, Pratt & Whitney Canada, Mississ    GT-2002-30004 
IGTI  2002  A Test Stand for Dynamic Characterization of Oil-Free Bearings for Modern Gas Turbine Engines  Erik E. Swanson, James F. Walton II, Hooshang Heshmat, Mohawk Innovative Technology, Inc., Albany, NY, USA    GT-2002-30005 
IGTI  2002  A Method for On-Line Temperature Calculation of Aircraft Engine Turbine Discs  D. Botto, S. Zucca, M.M. Gola, Politecnico di Torino, Torino, ITALY; S. Salvano, FIAT AVIO, ITALY    GT-2002-30006 
IGTI  2002  Ejector Pumping Enhancement Through Pulsing Primary Flow  P.J. Vermeulen, V. Ramesh, University of Calgary, Calgary, Alberta, CANADA; D.N. Miller, P.J. Yagle, E.E. Bender, Lockheed Martin Aeronautics Company, Fort Worth, TX, USA    GT-2002-30007 
IGTI  2002  Ceramic Gas Turbine Materials Impact Evaluation  Mark van Roode, Oscar Jimenez, John McClain, Jeff Price, Solar Turbines Incorporated, San Diego, CA, USA; Vijay Parthasarathy, Burning Glass Technologies, San Diego, CA, USA; Kevin    GT-2002-30505 
IGTI  2002  Fracture Toughness Testing on Bars Under Opposite Cylinder Loading  Theo Fett, Dietrich Munz, Gerhard Thun, Forschungszentrum Karlsruhe, Karlsruhe,GERMANY    GT-2002-30507 
IGTI  2002  A Novel Technique for Estimation of Critical Size of Frontal Process Zone in Ceramics  Seong-Min Choi, Masato Okamoto, Hideo Awaji, Nagoya Institute of Technology, Nagoya, JAPAN    GT-2002-30508 
IGTI  2002  Advances in the Development of Silicon Nitride and Other Ceramics  W. Dave Carruthers, Dave Carruthers & Associates, Battle Ground, WA, USA; Mark van Roode, Solar Turbines Incorporated, San Diego, CA, USA; Paul F. Becher, Mattison    GT-2002-30504 
IGTI  2002  Design Study of a Lean Premixed Prevaporized Counter Flow Combustor for a Micro Gas Turbine  O. Liedtke, A. Schulz, S. Wittig, Universität Karlsruhe, Karlsruhe, GERMANY    GT-2002-30074 
IGTI  2002  Development of a Lean Direct Fuel Injector for Low Emission Aero Gas Turbines  Daniel A. Nickolaus, D. Scott Crocker, David L. Black, Clifford E. Smith, CFD Research Corporation, Huntsville, AL, USA    GT-2002-30409 
IGTI  2002  Design of High Performing Duct-Burners for Combined-Cycle Plants Using Progressive Optimization  L. A. Catalano, A. Dadone, D. Manodoro, Politecnico di Bari, Bari, ITALY    GT-2002-30087 
IGTI  2002  Design & Evaluation of an LCV Combustor for the VOLVO VT4400 Industrial Gas Turbine  Pontus Eriksson, Fredrik Hermann, Lund Institute of Technology, Lund, SWEDEN; Steve Walsh, Aero & Industrial Technology Ltd., Burnley, UK; Rolf G    GT-2002-30088 
IGTI  2002  Sector Tests of a Low-NOx, Lean-Direct-Injection, Multipoint Integrated Module Combustor Concept  Robert Tacina, NASA, Glenn Research Center, Cleveland, OH, USA; Changlie Wey, QSS Group, Inc., Cleveland, OH, USA; Peter Laing, Adel    GT-2002-30089 
IGTI  2002  CFD-Based, Parametric, Design Tool for Gas Turbine Combustors from Compressor Deswirl Exit to Turbine Inlet  Mark K. Lai, Robert S. Reynolds, Jeffrey Armstrong, Honeywell International, Phoenix, AZ, USA    GT-2002-30090 
IGTI  2002  CFD Modelling of Biogas Cofiring in a Gasturbine  J.A. Lycklama à Nijeholt, E.M.J. Komen, NRG Petten, Petten, NETHERLANDS; R.T.E. Hermanns, L.P.H. de Goey, Eindhoven University of Technology, Eindhoven, NETHERLANDS; M.C. van Beek,    GT-2002-30103 
IGTI  2002  Low NOx Emission Technology for the Vx4.3A Gas Turbine Series in Fuel Oil Operation  Juergen Meisel, Gerald Lauer, Stefan Hoffman, Siemens AG, Mülheim, GERMANY    GT-2002-30104 
IGTI  2002  A Combustion Study of Gas Turbines Using Multi-Species/Reacting Computational Fluid Dynamic  Sasan Armand, Swales NASA, Hampton, VA, USA; Mei Chen, AEA Technology, Waterloo, ON, CANADA    GT-2002-30105 
IGTI  2002  V64.3A Gas Turbine Natural Gas Burner Development  Heinrich Hermsmeyer, Bernd Prade, Udo Schmitz, Stefan Hoffmann, Werner Krebs, Siemens AG, Power Generation, Mülheim/Ruhr, GERMANY    GT-2002-30106 
IGTI  2002  The Development of an Ultra Low Emissions Liquid Fuel Combustor for the OPRA OP16 Gas Turbine  Sikke Klein, Ivar Austrem, Jan Mowill, OPRA Optimal Radial Turbine B.V., Hengelo, NETHERLANDS    GT-2002-30107 
IGTI  2002  The ALSTOM GT13E2 Medium BTU Gas Turbine  Frank Reiss, Karl Reyser, ALSTOM Power Ltd., Baden, SWITZERLAND; Timothy Griffin, ALSTOM Power Technology Ltd., Baden, SWITZERLAND    GT-2002-30108 
IGTI  2002  Active Combustion Instability Control with Spinning Valve Actuator  Prabir Barooah, Torger J. Anderson, Jeffrey M. Cohen, United Technologies Research Center, East Hartford, CT, USA    GT-2002-30042 
IGTI  2002  Application of Dynamic Simulation to CAES G/T Control System Development  Katsuyuki Takahashi, Makoto Endoh, Tomoshige Yasuda, Masahiro Kurosaki, Ishikawajima-Harima Heavy Industries Co., Ltd., Tokyo, JAPAN    GT-2002-30036 
IGTI  2002  Staged Combustion Control System Development for Aviation Gas Turbine Engines  T.V. Breikin, S.M. Hargrave, H.A. Thompson, P.J. Fleming, University of Sheffield, Sheffield, UK; S.J. Riley, Rolls-Royce plc, Derby, UK    GT-2002-30040 
IGTI  2002  The Use of Expert Systems for Gas Turbine Diagnostics and Maintenance  P.R. Spina, University of Bologna, Bologna, ITALY; G. Torella, Italian Air Force Academy, Napoli, ITALY; M. Venturini, University of Ferrara, Ferrara, ITALY    GT-2002-30033 
IGTI  2002  The R-ATR and the R-REF Gas Turbine Power Cycles with CO2 Removal Part 1: The R-ATR Cycle  Daniele Fiaschi, Lidia Lombardi, Libero Tapinassi, University of Florence, Firenze, ITALY    GT-2002-30116 
IGTI  2002  Thermodynamic Performance Analysis of New Gas Turbine Combined Cycles with No Emissions of Carbon Dioxide  R. Gabbrielli, Università di Pisa, Pisa, ITALY; R. Singh, Cranfield University, Cranfield, UK    GT-2002-30117 
IGTI  2002  Conceptual Design for an Industrial Prototype GRAZ CYCLE Power Plant  H. Jericha, E. Göttlich, Graz University of Technology, Graz, AUSTRIA    GT-2002-30118 
IGTI  2002  The R-ATR and the R-REF Gas Turbine Power Cycles with CO2 Removal Part 2: The R-REF Cycle  Daniele Fiaschi, Lidia Lombardi, Libero Tapinassi, University of Florence, Firenze, ITALY    GT-2002-30550 
IGTI  2002  Carbon Dioxide Emission Analysis with Energy Payback Effect  Motoaki Utamura, Hitachi Engineering Co. Ltd, Hitachi-shi, JAPAN    GT-2002-30448 
IGTI  2002  Flow and Heat Transfer Predictions for a Flat-Tip Turbine Blade   Huitao Yang, Sumanta Acharya, Srinath V. Ekkad, Louisiana State University, Baton Rouge, LA, USA; Chander Prakash, GE Aircraft Engines, Cincinnati, OH, USA; Ron Bunc    GT-2002-30190 
IGTI  2002  Numerical Simulation of Flow and Heat Transfer Past a Turbine Blade with a Squealer-Tip  Huitao Yang, Sumanta Acharya, Srinath V. Ekkad, Louisiana State University, Baton Rouge, LA, USA; Chander Prakash, GE Aircraft Engines, Cinci    GT-2002-30193 
IGTI  2002  Effects of Tip Geometry and Tip Clearance on the Mass/Heat Transfer from a Large-Scale Gas Turbine Blade  M. Papa, F. Gori, University of Rome "Tor Vergata", Rome, ITALY; R.J. Goldstein, University of Minnesota, Minneapolis, MN, U    GT-2002-30192 
IGTI  2002  Heat Transfer Coefficient and Film-Cooling Effectiveness on a Gas Turbine Blade Tip  Jae Su Kwak, Je-Chin Han, Texas A&M University, College Station, TX, USA    GT-2002-30194 
IGTI  2002  Predictions of External Heat Transfer for Turbine Vanes and Blades with Secondary Flowfields  K. Hermanson, S. Kern, G. Picker, S. Parneix, Alstom Power (Schweiz), Baden-Dättwil, SWITZERLAND    GT-2002-30206 
IGTI  2002  ICAS-GT: A European Collaborative Research Programme on Internal Cooling Air Systems for Gas Turbines Peter  D. Smout, Rolls-Royce plc., Derby, U.K.; John W. Chew, University of Surrey, Guildford, U.K.; Peter R. N. Childs, Unive    GT-2002-30479 
IGTI  2002  Measurement and Analysis of Ingestion Through a Turbine Rim Seal  O. Gentilhomme, N.J. Hills, A.B. Turner, University of Sussex, Brighton, UK; J.W. Chew, University of Surrey, Guildford, UK    GT-2002-30481 
IGTI  2002  Computation of Flow Between Two Discs Rotating at Different Speeds  Muhsin Kilic, Uludag University, Bursa, TURKEY; J Michael Owen, University of Bath, Bath, UK    GT-2002-30242 
IGTI  2002  Fluid Dynamics of a Pre-Swirl Rotor-Stator System  Youyou Yan, City University, London, UK; Mahmood Farzaneh Gord, Gary D. Lock, Michael Wilson, J.Michael Owen, University of Bath, Bath, UK    GT-2002-30415 
IGTI  2002  Experimental Studies of the Boundary Conditions Leading to Oil Fire in the Bearing Chamber and in the Secondary Air System of Aeroengines  K. Willenborg, S. Busam, H. Roßkamp, S. Wittig, Universität Karlsruhe, Karlsruhe, GERMANY    GT-2002-30241 
IGTI  2002  Application of Methodologies to Evaluate the Health State of Gas Turbines in a Cogenerative Combined Cycle Power Plant   . Pinelli, M. Venturini, University of Ferrara, Ferrara, Italy    GT-2002-30248 
IGTI  2002  Development of Diagnostic Tools for Real Time Assessment of Gas Turbine Hot Gas Path Component Temperatures. A Preliminary Study.  Carlo Carcasci, Bruno Facchini, Francesco Grillo, University of Florence, Florence, ITALY; Erio Ben    GT-2002-30249 
IGTI  2002  Combined Heat and Power Sizing Methodology   Asfaw Beyene, San Diego State University, San Diego, CA, USA    GT-2002-30567 
IGTI  2002  The Model Steam Turbine: More Details About the Heat Recovery Steam Generator Evaluating Method in a Combined Cycle Plant  Dietmar Schmidt, Michail Arnold, Siemens PG, Erlangen, GERMANY    GT-2002-30482 
IGTI  2002  Thermal and Economic Considerations for Optimizing HRSG Design   Akber Pasha, Andrew S. Ragland, Suichu Sun, Vogt-NEM Inc., Louisville, KY, USA    GT-2002-30250 
IGTI  2002  A Simple Method for Estimating the Parameters of the Beta Distribution Applied to Modeling Uncertainty in Gas Turbine Inlet Temperature Frederic   A. Holland, Jr., NASA Glenn Research Center, Cleveland, OH, USA    GT-2002-30295 
IGTI  2002  Load History Effects on Fretting Contacts of Isotropic Materials  P. T. Rajeev, GE Superabrasives, Worthington, OH, USA; H. Murthy, T. N. Farris, Purdue University, West Lafayette, IN, USA    GT-2002-30297 
IGTI  2002  Analytical Method of Fatigue Damage Estimation for Compressor Stator Blades of Gas Turbines Experiencing Rotating Stall   Yasushi Hayasaka, Shigeo Sakurai, Takeshi Kudo, Kunihiro Ichikawa, Hitachi, Ltd., Hitachi, JAPAN    GT-2002-30298 
IGTI  2002  Critical Plane Fatigue Modeling and Characterization of Single Crystal Nickel Superalloys  Rajiv A. Naik, Daniel P. DeLuca, Dilip M. Shah, Pratt & Whitney, East Hartford, CT, USA    GT-2002-30300 
IGTI  2002  A New Tool for Design and Certification of Aircraft Turbine Rotors  Gerald R. Leverant, R. Craig McClung, Harry R. Millwater, Michael P. Enright, Southwest Research Institute, San Antonio, TX, USA    GT-2002-30303 
IGTI  2002  Optimum Strain Gauge Application to Bladed Assemblies  J. Szwedowicz, ABB Turbo Systems Ltd., Baden, SWITZERLAND; S.M. Senn, R.S. Abhari, Swiss Federal Institute of Technology, Zurich, SWITZERLAND    GT-2002-30306 
IGTI  2002  Investigation of Flow Structure and Losses at the Endwall Sections of the Last Stage Blade  A.V. Granovski, M.K. Kostege, Alstom Power Uniturbo, Moscow, RUSSIA    GT-2002-30349 
IGTI  2002  Visualizations of the Unsteady Flow Field Near the Endwall of a Turbine Cascade  Hongwei Ma, Haokang Jiang, Yaxi Qiu, Beijing University of Aeronautics and Astronautics, Beijing, CHINA    GT-2002-30350 
IGTI  2002  Axisymmetric Endwall Contouring in a Four-Stage Turbine - Comparison of Experimental and Numerical Results  Dieter E. Bohn, Norbert Sürken, Qing Yu, Aachen University of Technology, Aachen, GERMANY; Franz Kreitmeier, ALSTOM Power,    GT-2002-30351 
IGTI  2002  Improving 3D Flow Characteristics in a Multistage LP Turbine by Means of Endwall Contouring and Airfoil Design Modification - Part 1: Design and Experimental Investigation   S. Eymann, University of Stuttgart, Stuttgart, GERMANY;    GT-2002-30352 
IGTI  2002  Improving 3D Flow Characteristics in a Multistage LP Turbine by Means of Endwall Contouring and Airfoil Design Modification - Part 2: Numerical Simulation and Analysis  Jochen Gier, Sabine Ardey, Stefan Eymann, Ulf Reinmöller, Re    GT-2002-30353 
IGTI  2002  Component Tests with a Model V84.3A Gas Turbine in the Siemens Test Facility in Berlin  Christof Lechner, Bernward Mertens, Dieter Warnack, Dirk Weltersbach, Siemens Power Generation, Berlin, GERMANY; Herwart Hönen, RWTH Aachen, A    GT-2002-30490 
IGTI  2002  Swirl and Tip Leakage Flow Interaction with Struts in Axial Diffusers  H.-U. Fleige, W. Riess, J. Seume, University of Hannover, Hannover, GERMANY    GT-2002-30491 
IGTI  2002  Aerodynamic Optimisation of an Aeroengine Bypass Duct OGV-Pylon Configuration   Thomas Tschirner, Michael Pfitzner, Rüdiger Merz, Rolls Royce Deutschland plc & Co KG, Dahlewitz, GERMANY    GT-2002-30493 
IGTI  2002  Stator-Rotor Interactions in a Transonic Compressor: Part 1 - Effect of Blade-Row Spacing on Performance  Steven E. Gorrell, William W. Copenhaver, Air Force Research Laboratory, Wright-Patterson AFB, OH, USA; Theodore H. Okiishi,    GT-2002-30494 
IGTI  2002  Stator-Rotor Interactions in a Transonic Compressor: Part 2 - Description of a Loss Producing Mechanism   Steven E. Gorrell, William W. Copenhaver, Air Force Research Laboratory, Wright-Patterson AFB, OH, USA; Theodore H. Okiishi,    GT-2002-30495 
IGTI  2002  Microturbine Recuperator Manufacturing and Operating Experience   Bill Treece, Phil Vessa, Robert McKeirnan, Capstone Turbine Corporation, Chatsworth, CA, USA    GT-2002-30404 
IGTI  2002  The ACTE Spiral Recuperator for Gas Turbine Engines   Hubert Antoine, Luc Prieels, ACTE S.A., Ans, BELGIUM    GT-2002-30405 
IGTI  2002  Impact of a Ceramic Microchannel Heat Exchanger on a Micro Turbine  B.G. Carman, J.S. Kapat, L.C. Chow, L. An, University of Central Florida, Orlando, FL, USA    GT-2002-30544 
IGTI  2002  Proe 90™ Recuperator for Microturbine Applications   Richard A. Proeschel, Proe Power Systems, Thousand Oaks, CA, USA    GT-2002-30406 
IGTI  2002  The National Energy Technology Laboratory's Hybrid Power Systems Program  Richard Dennis, Mark Williams, Abbie Layne, U.S. Department of Energy, Morgantown, WV, USA; Scott Samuelsen, University of California, Irvine, CA, USA; Norm Holcombe, U.S. Department of Energy, Pittsburgh, PA, USA     GT-2002-30668 
IGTI  2002  Status of Pressurized SOFC/Gas Turbine Power System Development at Siemens Westinghouse  Stephen E. Veyo, Kevin P. Litzinger, Shailesh D. Vora, Wayne L. Lundberg, Siemens Westinghouse Power Corporation, Pittsburgh, PA, USA     GT-2002-30670 
IGTI  2002  Power Plant System Configurations for the 21st Century  A.D. Rao, G.S. Samuelsen, University of California, Irvine, CA, USA; F.L. Robson, KraftWork Systems, Inc., Amston, CT, USA; R.A. Geisbrecht, U.S. DOE/NETL, Pittsburgh, PA, USA     GT-2002-30671 
IGTI  2002  Stressed Oxidation Life for a Carbon Fiber Reinforced Silicon Carbide Matrix Composite  Anthony Calomino, Michael Verrilli, NASA Glenn Research Center, Brook Park, OH, USA; David J. Thomas, Ohio Aerospace Institute, Brook Park, OH, USA     GT-2002-30057 
IGTI  2002  Progress in SiC/SiC Ceramic Composite Development for Gas Turbine Hot-Section Components under NASA EPM and UEET Programs  James A. DiCarlo, Hee Mann Yun, Gregory N. Morscher, Ramakrishna T. Bhatt, NASA Glenn Research Center, Cleveland, OH, USA     GT-2002-30461 
IGTI  2002  An Improved Long Life Duration CMC for Jet Aircraft Engine Applications  Eric Bouillon, Franck Lamouroux, Laurent Baroumes, Jean Claude Cavalier, Patrick Spriet, Georges Habarou, Snecma-Moteurs, Le Haillan, FRANCE     GT-2002-30625 
IGTI  2002  Interpretation of Weighted-Least-Squares Gas Path Analysis Results  David L. Doel, GE Aircraft Engines, Evendale, OH, USA     GT-2002-30025 
IGTI  2002  Feed Forward Neural Network-Based Diagnostic Tool for Gas Turbine Power Plant  Lorenzo Dambrosio, Marco Bomba, Sergio M. Camporeale, Bernardo Fortunato, Politecnico Di Bari, Bari, ITALY     GT-2002-30019 
IGTI  2002  Identifiability in Multi-Point Gas Turbine Parameter Estimation Problems  Tomas U.J. Grönstedt, Chalmers University of Technology, Göteborg, SWEDEN     GT-2002-30020 
IGTI  2002  Fault Diagnostics Using Genetic Algorithm for Advanced Cycle Gas Turbine  Suresh Sampath, Ankush Gulati, Riti Singh, Cranfield University, UK     GT-2002-30021 
IGTI  2002  Gas Turbine Data Validation Using Gas Path Analysis  Patrick C. Escher, EscherTec. Ltd., Zürich, SWITZERLAND     GT-2002-30024 
IGTI  2002  Inherent CO2 Capture Using Chemical Looping Combustion in a Natural Gas Fired Power Cycle  Øyvind Brandvoll, Olav Bolland, The Norwegian University of Science and Technology, Trondheim, NORWAY     GT-2002-30129 
IGTI  2002  The LAJ Cycle: A New Combined- Cycle Fossil Fuel Power System  Roddie R. Judkins, Timothy R. Armstrong, Solomon D. Labinov, Oak Ridge National Laboratory, Oak Ridge, TN, USA     GT-2002-30612 
IGTI  2002  A Universal Mathematical Model for a New Combined-Cycle, Fossil-Fuel Power System (LAJ Cycle): Part 1 - Static Model  Roddie R. Judkins, Timothy R. Armstrong, Solomon D. Labinov, Oak Ridge National Laboratory, Oak Ridge, TN, USA     GT-2002-30611 
IGTI  2002  A Universal Mathematical Model for a New Combined-Cycle Fossil-Fuel Power System (LAJ Cycle): Part 2 - Dynamic Model  Roddie R. Judkins, Timothy R. Armstrong, Solomon D. Labinov, Oak Ridge National Laboratory, Oak Ridge, TN, USA     GT-2002-30665 
IGTI  2002  A New Generalised Carbon Exergy Tax: An Effective Rule to Control Global Warming  A. Traverso, A.F. Massardo, Università di Genova, Genova, ITALY; M. Santarelli, M. Calì, Politecnico di Torino, Torino, ITALY     GT-2002-30139 
IGTI  2002  Integration of Gas Turbine Education in an Undergraduate Thermodynamics Course  Blace C. Albert, A. Özer Arnas, United States Military Academy, West Point, NY, USA     GT-2002-30153 
IGTI  2002  An Undergraduate Gas Turbine Engine Program Enhanced by Design and Research Threads  Brenda A. Haven, Aaron R. Byerley, Neal Barlow, United States Air Force Academy, USAF Academy, CO, USA     GT-2002-30588 
IGTI  2002  A Rotating Machinery Course at Virginia Tech Developed with Industry Support  Mary E. F. Kasarda, Virginia Tech, Blacksburg, VA, USA     GT-2002-30154 
IGTI  2002  Component Matching Analysis for a Power Generation Gas Turbine - Classroom Applications  Ron Flack, University of Virginia, Charlottesville, VA, USA     GT-2002-30155 
IGTI  2002  Augmentation of Stagnation Region Heat Transfer Due to Turbulence from an Advanced Dual-Annular Combustor  G. James Van Fossen, NASA Glenn Research Center, Cleveland, OH, USA; Ronald S. Bunker, General Electric, Schenectady, NY,USA     GT-2002-30184 
IGTI  2002  Measurement and Prediction of the Influence of Catalytic and Dry Low NOx Combustor Turbulence on Vane Surface Heat Transfer  Forrest E. Ames, Chao Wang, Pierre A. Barbot, University of North Dakota, Grand Forks, ND, USA     GT-2002-30524 
IGTI  2002  Effects of Aeroderivative Combustor Turbulence on Endwall Heat Transfer Distributions Acquired in a Linear Vane Cascade  Forrest E. Ames, Pierre A. Barbot, Chao Wang, University of North Dakota, Grand Forks, ND, USA     GT-2002-30525 
IGTI  2002  Combustor Turbine Interface Studies - Part 1: Endwall Effectiveness Measurements  W.F. Colban, K.A. Thole, Virginia Polytechnic Institute and State University, Blacksburg, VA, USA; G. Zess, Pratt and Whitney, East Hartford, CT, USA     GT-2002-30526 
IGTI  2002  Combustor-Turbine Interface Studies - Part 2: Flow and Thermal Field Measurements  W. F. Colban, A. T. Lethander, K. A. Thole, Virginia Polytechnic Institute and State University, Blacksburg, VA, USA; G. Zess, Pratt and Whitney, East Hartford, CT, USA     GT-2002-30527 
IGTI  2002  Numerical Simulation of Film Cooling on the Tip of a Gas Turbine Blade  Sumanta Acharya, Huitao Yang, Louisiana State University, Baton Rouge, LA, USA; Chander Prakash, GE Aircraft Engines, Cincinnati, OH, USA; Ron Bunker, GE Corporate Research, Schenectady, NY, USA     GT-2002-30553 
IGTI  2002  An Investigation on Turbine Tip and Shroud Heat Transfer  Kam S. Chana, QinetiQ, Farnborough, UK; Terry V. Jones, University of Oxford, Oxford, UK     GT-2002-30554 
IGTI  2002  Heat Transfer Coefficient and Film- Cooling Effectiveness on the Squealer Tip of a Gas Turbine Blade  Jae Su Kwak, Je-Chin Han, Texas A&M University, College Station, TX, USA     GT-2002-30555 
IGTI  2002  Local Mass/Heat Transfer on Turbine Blade Near-Tip Surfaces  P. Jin, R.J. Goldstein, University of Minnesota, Minneapolis, MN, USA     GT-2002-30556 
IGTI  2002  Determination of Non-Uniform Heat Transfer Coefficients Around a Solid Aluminum Alloy Complex Shape During Quenching by Using an Inverse Method  Pen-Chung Chen, ALSTOM Power Inc., Midlothian, VA, USA; Deborah A. Kaminski, Robert W. Messler, Jr., Rensselaer Polytechnic Institute, Troy, NY, USA     GT-2002-30205 
IGTI  2002  Upgrades of Steam Turbine Generator Units in Watson Cogeneration Combined Cycle Plant  Steve Ingistov, BP/WCC, Los Angeles, CA, USA     GT-2002-30251 
IGTI  2002  Design Considerations for Combined Cycle Plants for the Deregulated Market - An EPC Contractor's Perspective  Ram G. Narula, Martin Massy, Jyoti Singh, Bechtel Power Corporation, Frederick, MD, USA     GT-2002-30252 
IGTI  2002  GT10C - 30 MW Gas Turbine for Mechanical Drive and Power Generation  Anders Hellberg, Georg Norden, Sergey Shukin, Alstom Power Sweden, Finspong, SWEDEN     GT-2002-30253 
IGTI  2002  Design, Development and Operational Experience of ALSTOM's 13.4MW Cyclone Gas Turbine  Brian M. Igoe, Martin McGurry, ALSTOM Power Ltd., Lincoln, UK     GT-2002-30254 
IGTI  2002  Development of a 20MW-Class High-Efficiency Gas Turbine L20A  Takao Sugimoto, Katsushi Nagai, Masanori Ryu, Ryozo Tanaka, Takeshi Kimura, Takashi Nagatomo, Kawasaki Heavy Industries, Ltd., Akashi Hyogo, JAPAN     GT-2002-30255 
IGTI  2002  Viscoplastic Modelling for Industrial Gas Turbine (IGT) Application with Emphasis on the Sheet Material Haynes 230  Magnus Hasselqvist, ALSTOM Power Sweden, Finspong, SWEDEN     GT-2002-30659 
IGTI  2002  The Effect of Molybdenum on the Creep Behavior of Orthorhombic Titanium Aluminides  Dominique A. Shepherd, National Institute of Standards and Technology, Gaithersburg, MD, USA; Vijay K. Vasudevan, University of Cincinnati, Cincinnati, OH, USA     GT-2002-30660 
IGTI  2002  Surface Generation and Machining with Rational B-Splines for Turbomachinery Components  Der Min Tsay, Chien Wen Chen, Jiun Ren Chen, National Sun Yat-Sen University, Kaohsiung, TAIWAN     GT-2002-30485 
IGTI  2002  A Study on the CAD/CAM of Curvic Couplings  Ying-Chien Tsai, Wei-Yi Hsu, National Sun Yat-Sen University, Kaohsiung, TAIWAN     GT-2002-30486 
IGTI  2002  Selection of Overlays for Single Crystal Shrouded Turbine Blades  Irene Nava, Solar Turbines Incorporated, San Diego, CA, USA; Douglas Nagy, Liburdi Engineering Limited, Dundas, ON, CANADA     GT-2002-30661 
IGTI  2002  CMSX® -486, A New Grain Boundary Strengthened Single Crystal Superalloy  Ken Harris, Jacqueline B. Wahl, Cannon-Muskegon Corporation, Muskegon, MI, USA     GT-2002-30487 
IGTI  2002  Through Life Management of Naval Gas Turbines for Extended Service Lives and Reduced Lifetime Costs  Richard Bolwell, UK MoD Warship Support Agency, Bath, UK     GT-2002-30269 
IGTI  2002  United States Navy (USN) Integrated Power System (IPS) Gas Turbine Generator Set Test Experience  Edward Harvey, Joseph Kingsley, Matthew Stauffer, Naval Surface Warfare Center, Philadelphia, PA, USA     GT-2002-30260 
IGTI  2002  US Navy Large Deck Amphibious Assault Ship: Steam to Gas Turbine Conversion  Shaun Hatcher, Alan Oswald, Abe Boughner, NAVSEA-Philadelphia, Philadelphia, PA, USA     GT-2002-30419 
IGTI  2002  The Design and Layout of the Propulsion Plant of the RNLN Air Defence and Command Frigate (ADCF)  K.O. Broekhaus, M.J. Rand, Royal Netherlands Navy, The Hague, NETHERLANDS     GT-2002-30673 
IGTI  2002  A Bulk Flow Model for Off-Centered Honeycomb Gas Seals  Thomas Soulas, Luis San Andres, Texas A&M University, College Station, TX, USA     GT-2002-30286 
IGTI  2002  A Bulk-Flow Model of Angled Injection Lomakin Bearings  Luis San Andrés, Thomas Soulas, Texas A&M University, College Station, TX, USA; Florence Challier, Patrice Fayolle, Snecma Moteurs - DMF, Vernon, FRANCE     GT-2002-30287 
IGTI  2002  A Study of the Influence of Static Eccentricity and Unbalance on Cavitation Effects in a Squeeze Film Damped Flexible Rotor  Philip Bonello, Michael J. Brennan, Roy Holmes, University of Southampton, Southampton, UNITED KINGDOM     GT-2002-30288 
IGTI  2002  Deterministic Micro Asperities on Bearings and Seals Using a Modified LIGA Process  Lyndon Scott Stephens, Ravi Siripuram, Matthew Hayden, Bianca McCartt, University of Kentucky, Lexington, KY, USA     GT-2002-30289 
IGTI  2002  Measurement of Oil Aeration Effects in Journal Bearings  J.L. Nikolajsen, D. Dong, M.J. Goodwin, Staffordshire University, Stafford, UK     GT-2002-30290 
IGTI  2002  A Novel Two Dimensional Viscous Inverse Design Method for Turbomachinery Blading  L. de Vito, R.A. Van den Braembussche, H. Deconinck, von Karman Institute for Fluid Dynamics, Sint-Genesius-Rode, BELGIUM     GT-2002-30617 
IGTI  2002  Accelerating Turbomachinery Design  Jerome P. Jarrett, William N. Dawes, P. John Clarkson, University of Cambridge, Cambridge, UK     GT-2002-30618 
IGTI  2002  Analysis and Optimization of Transonic Centrifugal Compressor Impellers Using the Design of Experiments Technique  Duccio Bonaiuti, Andrea Arnone, Mirco Ermini, University of Florence, Florence, ITALY; Leonardo Baldassarre, GE Nuovo Pignone, Florence, ITALY     GT-2002-30619 
IGTI  2002  Development of an (Adaptive) Unstructured 2-D Inverse Design Method for Turbomachinery Blades  Benjamin M.F. Choo, Mehrdad Zangeneh, University College London, London, UK     GT-2002-30620 
IGTI  2002  Computational Modeling of Vortex Generators for Turbomachinery  R.V. Chima, NASA Glenn Research Center, Cleveland, OH, USA     GT-2002-30677 
IGTI  2002  The Use of Artificial Neural Networks for Performance Prediction of Return Channels for Industrial Centrifugal Compressors  Simone Pazzi, Francesco Martelli, Università di Firenze, Firenze, ITALY; Vittorio Michelassi, Università Roma Tre, Roma, ITALY; Marco Giachi, Nuovo Pignone - GE, Firenze, ITALY     GT-2002-30392 
IGTI  2002  CFD Applications to Industrial Centrifugal Compressor Design  Andrea Arnone, Duccio Bonaiuti, Paolo Boncinelli, Mirco Ermini, Alberto Milani, University of Florence, Florence, ITALY; Leonardo Baldassarre, Massimo Camatti, GE Nuovo Pignone, Florence, ITALY     GT-2002-30393 
IGTI  2002  Investigations of the Flow through a High Pressure Ratio Centrifugal Impeller  Gernot Eisenlohr, Wehrheim, GERMANY; Hartmut Krain, DLR-Köln, Köln, GERMANY; Franz-Arno Richter, MAN Turbomaschinen AG, Oberhausen, GERMANY; Valentin Tiede, Kompressorenbau Bannewitz GmbH, Bannewitz, GERMANY     GT-2002-30394 
IGTI  2002  Improving a Vaned Diffuser for a Given Centrifugal Impeller by 3D Inverse Design  Mehrdad Zangeneh, University College London, London, UK; Damian Vogt, Christian Roduner, ETH Swiss Federal Institute of Technology, Zurich, SWITZERLAND     GT-2002-30621 
IGTI  2002  Blade Row Interaction Effects on the Performance of a Moderately Loaded NASA Transonic Compressor Stage  Dale E. Van Zante, NASA Glenn Research Center, Cleveland, OH, USA; Wai-Ming To, AP Solutions, Inc., Cleveland, OH, USA; Jen-Ping Chen, Mississippi State University, MS, USA     GT-2002-30575 
IGTI  2002  One-Dimensional Unsteady Modeling of the Flow-Field in a Short Duration Facility  G. Frati, R. Dénos, Von Karman Institute for Fluid Dynamics, Rhode Saint Genèse, BELGIUM     GT-2002-30456 
IGTI  2002  Towards a Reduction of Compressor Blade Dynamic Loading by Means of Rotor-Stator Interaction Optimization  Ernesto Benini, Andrea Toffolo, Università di Padova, Padova, ITALY     GT-2002-30396 
IGTI  2002  Unsteady Flow Simulations of a Transonic Nozzle and Cascade for a Time-Dependent Boundary Flow  Erdal Turkbeyler, Imperial College of Science, Technology and Medicine, London, UK     GT-2002-30457 
IGTI  2002  Experimental Investigations into Pressure Field in Tip Clearance of Shrouded Rotor Blades  Krzysztof Kosowski, Marian Piwowarski, Technical University of Gdansk, Gdansk, POLAND     GT-2002-30397 
IGTI  2002  Environmental Barrier Coatings Having a YSZ Top Coat  Kang N. Lee, NASA Glenn Research Center, Cleveland, OH, USA     GT-2002-30626 
IGTI  2002  Development and Evaluation of Ceramic Components  Takero Fukudome, Sazo Tsuruzono, Kyocera Corporation, Kokubu, JAPAN; Wataru Karasawa, Yoshihiro Ichikawa, Kawasaki Heavy Industries Ltd., Akashi, JAPAN     GT-2002-30627 
IGTI  2002  Development and Evaluation of Environmental Barrier Coatings for Silicon Nitride  Ellen Y. Sun, Harry E. Eaton, John E. Holowczak, Gary D. Linsey, United Technologies Research Center, East Hartford, CT, USA     GT-2002-30628 
IGTI  2002  Evaluation of Mechanical Reliability of Silicon Nitride Vanes After Field Tests in an Industrial Gas Turbine  H.-T. Lin, M.K. Ferber, Oak Ridge National Laboratory, Oak Ridge, TN, USA; W. Westphal, F. Macri, Rolls-Royce Allison, Indianapolis, IN, USA     GT-2002-30629 
IGTI  2002  Nondestructive Characterization of Environmental Barrier Coatings Applied to Monolithic Ceramics  W.A. Ellingson, C. Deemer, S. Erdman, A. Parikh, Argonne National Laboratory, Argonne, IL, USA     GT-2002-30645 
IGTI  2002  Fuel Atomization in Small Jet Engines  Yeshayahou Levy, Semion Lipkin, Valery Nadvany, Valery Sherbaum, Technion, Haifa, ISRAEL     GT-2002-30586 
IGTI  2002  Low Emission Combustion Turbine Experiments with Supercritical Fuels™  Charles W. Haldeman, Joseph P. O'Brien, Jon R. Valbert, Robert M. Cataldo, Brian S. Ahern, Arthur W. White, Supercritical Combustion Corporation, Woburn, MA, USA; George Opdyke, Jr., Dykewood Enterprises, Stratford, CT, USA; Jefferson W. Tester, Massachusettes Institute of Technology, Cambridge, MA, USA     GT-2002-30587 
IGTI  2002  Fuel-Cooled Thermal Management for Advanced Aero Engines  He Huang, Louis J. Spadaccini, David R. Sobel, United Technologies Research Center, East Hartford, CT, USA     GT-2002-30070 
IGTI  2002  On-Line Fuel Deoxygenation for Coke Suppression  Louis J. Spadaccini, He Huang, United Technologies Research Center, East Hartford, CT, USA     GT-2002-30071 
IGTI  2002  Spray Test of Fuel Nozzle for Lean Pre-Mixed Pre-Vaporized Combustor  Tomoyoshi Nakae, Masao Saigo, Akihiro Santo, Atsushi Tanaka, Mitsubishi Heavy Industries Ltd., Komaki, JAPAN     GT-2002-30072 
IGTI  2002  Turbofan Performance Deterioration Tracking Using Non-Linear Models and Optimization Techniques  K. Mathioudakis, Ph. Kamboukos, A.Stamatis, National Technical University of Athens, Athens, GREECE     GT-2002-30026 
IGTI  2002  Increasing Diagnostic Effectiveness by Inclusion of Fuel Composition and Water Injection Effects  K. Mathioudakis, N. Aretakis, A. Tsalavoutas, National Technical University of Athens, Athens, GREECE     GT-2002-30032 
IGTI  2002  Automated Fault Diagnosis for Small Gas Turbine Engines  Craig R. Davison, A.M. Birk, Queen's University, Kingston, Ontario, CANADA     GT-2002-30029 
IGTI  2002  Setting Up of a Probabilistic Neural Network for Sensor Fault Detection Including Operation with Component Faults  C. Romessis, K. Mathioudakis, National Technical University of Athens, Athens, GREECE     GT-2002-30030 
IGTI  2002  Non-Linear Engine Component Fault Diagnosis from a Limited Number of Measurements Using a Combinatorial Approach  N. Aretakis, K. Mathioudakis, A. Stamatis, National Technical University of Athens, Athens, GREECE     GT-2002-30031 
IGTI  2002  Optimisation of Biomass Fuelled Gas Turbines Using Genetic Algorithms  Sandro B. Ferreira, Pericles Pillidis, Cranfield University, Cranfield, UK; Henrik Widell, Klarup, DENMARK     GT-2002-30131 
IGTI  2002  Comparative Analysis of Off-Design Performance Characteristics of Single and Two Shaft Industrial Gas Turbines  J.H. Kim, J. L. Sohn, S.T. Ro, Seoul National University, Seoul, KOREA; T.S. Kim, Inha University, Inchon, KOREA     GT-2002-30132 
IGTI  2002  Improved Gas Turbine Efficiency Through Alternative Regenerator Configuration  Paul A. Dellenback, University of Wyoming, Laramie, WY, USA     GT-2002-30133 
IGTI  2002  Steady and Dynamic Performance and Emissions of a Variable Geometry Combustor in a Gas Turbine Engine  Y. G. Li, R. L. Hales, Cranfield University, Bedford, England     GT-2002-30135 
IGTI  2002  Part Load Behavior Optimization of Hybrid Coal and Gas Fired Combined Cycles Including Deactivation of Components  Janpeter Kühnel, Reza S. Abhari, ETH Zürich, Zürich, SWITZERLAND     GT-2002-30136 
IGTI  2002  Influence of the Hub Endwall Cavity Flow on the Time-Averaged and Time-Resolved Aero-Thermodynamics of an Axial HP Turbine Stage  R. Dénos, G. Paniagua, Von Karman Institute for Fluid Dynamics, Rhode Saint Genèse, BELGIUM     GT-2002-30185 
IGTI  2002  Turbine Tip and Shroud Heat Transfer and Loading Part A: Parameter Effects Including Reynolds Number, Pressure Ratio, and Gas to Metal Temperature Ratio  Marc D. Polanka, Donald A. Hoying, Matthew Meininger, Charles D. MacArthur, Air Force Research Laboratory, WPAFB, OH, USA     GT-2002-30186 
IGTI  2002  Prediction and Measurement of the Flow and Heat Transfer Along the Endwall and Within an Inlet Vane Passage  Hugo D. Pasinato, Zan Liu, Ramendra P. Roy, Kyle D. Squires, Arizona State University, Tempe, AZ, USA; W. Jeffrey Howe, Honeywell Engines and Systems, Phoenix, AZ, USA     GT-2002-30189 
IGTI  2002  Effects of High Free-Stream Turbulence on the Near-Wall Flow and Heat/Mass Transfer on the Endwall of a Linear Turbine Rotor Cascade  Sang Woo Lee, Sang Bae Jun, Kumoh National University of Technology, Kumi, KOREA; Byung-Kyu Park, Korea Institute of Machinery and Materials, Taejon, KOREA; Joon Sik Lee, Seoul National University, Seoul, KOREA     GT-2002-30187 
IGTI  2002  Effect of Non-Uniform Inlet Conditions on Endwall Secondary Flows  K. S. Hermanson, Alstom Power, Baden-Dättwil, SWITZERLAND; K. A. Thole, Virginia Polytechnic Institute and State University, Blacksburg, VA, USA     GT-2002-30188 
IGTI  2002  Measurement and CFD Prediction of the Flow Within an H.P. Compressor Drive Cone  Christopher A. Long, Alan B. Turner, Guven Kais, Kok M. Tham, University of Sussex, Brighton, UK; John A. Verdicchio, Rolls-Royce plc, Derby, UK     GT-2002-30239 
IGTI  2002  Experimental Analysis of Dust Separation in the Internal Cooling Air System of Gas Turbines  O. Schneider, H.J. Dohmen, Gerhard-Mercator University, Duisburg, GERMANY; A.W.Reichert, Siemens AG, Power Generation, Mülheim, GERMANY     GT-2002-30240 
IGTI  2002  Numerical Investigation of Vortex Reducer Flows in the High Pressure Compressor of Modern Aeroengines  Dieter Peitsch, Manuela Stein, Stefan Hein, Rolls-Royce Deutschland Ltd. & Co. KG, Dahlewitz, GERMANY; Reinhard Niehuis, Ulf Reinmöller, Rheinisch-Westfälische Technische Hochschule, Aachen, GERMANY     GT-2002-30674 
IGTI  2002  CFD Optimisation of Cooling Air Offtake Passages within Rotor Cavities  Colin Young, Guy D. Snowsill, Rolls-Royce plc, Derby, UK     GT-2002-30480 
IGTI  2002  Economic and Performance Evaluation of Combined Cycle Repowering Options  Rattan K. Tawney, James A. Bonner, Asem M. Elgawhary, Bechtel Power Corporation, Frederick, MD, USA     GT-2002-30565 
IGTI  2002  Effect of Inlet Air Cooling by Ice Storage on Unit Sizing of a Gas Turbine Cogeneration Plant  Ryohei Yokoyama, Koichi Ito, Osaka Prefecture University, Sakai, JAPAN     GT-2002-30484 
IGTI  2002  Parametric Analysis of Existing Gas Turbines with Inlet Evaporative and Overspray Fogging  R. Bhargava, Universal Ensco, Inc, Houston, TX, USA; C.B. Meher-Homji, Mee Industries, Inc., Monrovia, CA, USA     GT-2002-30560 
IGTI  2002  Cold Flow Investigation of Silicon Carbide Cylindrical Filter Element  M.H. Al-Hajeri, Raed Al-Saleh, Adel Al-Hebeshi, Technical Studies College, Roudha, KUWAIT; Ali Witry, Daimler Chrysler, Windsor, CANADA     GT-2002-30589 
IGTI  2002  Oil-Free Foil Bearings as a Reliable, High Performance Backup Bearing for Active Magnetic Bearings  E.E. Swanson, H. Heshmat, Mohawk Innovative Technology, Inc., Albany, NY, USA     GT-2002-30291 
IGTI  2002  On the Control of Synchronous Vibration in Rotor/Magnetic Bearing Systems Involving Auxiliary Bearing Contact  Patrick Keogh, Matthew Cole, Necip Sahinkaya, Clifford Burrows, University of Bath, Bath, UK     GT-2002-30292 
IGTI  2002  Non-Linear Behaviors in the Motion of a Magnetically Supported Rotor on the Catcher Bearing During Levitation Loss, an Experimental Description  E.N. Cuesta, V.R. Rastelli, L.U. Medina, N.I. Montbrun, S.E. Diaz, Universidad Simón Bolivar, Caracas, VENEZUELA     GT-2002-30293 
IGTI  2002  Neural Network Emulation of a Magnetically Suspended Rotor  A. Escalante, V. Guzmán, M. Parada, L. Medina, S.E. Diaz, Universidad Simón Bolivar, Caracas, VENEZUELA     GT-2002-30294 
IGTI  2002&nbs