| Papers |
| Conference |
Year |
Paper Title |
Paper Author |
Page Number |
Other |
| IGTI |
2004 |
A Performance Diagnosis of the 1939 Heinkel He S3B Turbojet |
C. Rodgers |
|
53014 |
| IGTI |
2004 |
Constraint on Aeroengine Design by Loss of Grounding in Vibration Physics |
Nicholas Klompas |
|
53033 |
| IGTI |
2004 |
Prediction of Turbofan Vibrations via Distinct Waves |
Nicholas Klompas |
|
53034 |
| IGTI |
2004 |
Experimental Operating Range Extension of a Twin-Spool Turbofan Engine by Active Stability Control Measures |
Stephan G. Scheidler,Leonhard Fottner |
|
53077 |
| IGTI |
2004 |
The Use of CFD for the Thermal Analysis of a High Pressure Compressor Rotor |
U. W. Ruedel,J. R. Turner |
|
53079 |
| IGTI |
2004 |
Evaluation of an Effective Engine Nozzle Map by Reduction of Data Acquired During Transient Operation |
M. Lichtsinder,Y. Levy |
|
53118 |
| IGTI |
2004 |
Thermal Stability Fuel Additives for Civil Aviation Applications |
J. F. A. Versluis,J. P. van Buijtenen,J. A. Melkert;P. Bogers |
|
53139 |
| IGTI |
2004 |
Research on Advanced Technologies for CO2 Reduction Using High Temperature Demonstrator Engine |
Masaharu Shinozaki,Tadashi Natsumura,Kenji Kobayashi,Mikiya Arai,Takurou Nakajima |
|
53140 |
| IGTI |
2004 |
Centenary of the First Gas Turbine to Give Net Power Output: A Tribute to AEgidius Elling |
Lars E. Bakken,Kristin Jordal,Elisabet Syverud,Timot Veer |
|
53211 |
| IGTI |
2004 |
Optimizing the Architecture of Civil Turbofan Engines to Improve Life Cycle Costs/Value Added |
Marc Foerstemann,Stephan Staudacher |
|
53221 |
| IGTI |
2004 |
Comparison of CFD and PIV Data for the Airflow in an Aero-Engine Bearing Chamber |
C. W. Lee,P. C. Palma,K. Simmons,S. J. Pickering |
|
53281 |
| IGTI |
2004 |
Effects of Using Hydrogen on Aero Gas Turbine Pollutant Emissions: Performance and Design |
Fredrik Svensson;Riti Singh |
|
53349 |
| IGTI |
2004 |
Performance Evaluation of Hybrid (Ceramic on Steel) Bearings With Advanced Aircraft Engine Oils for Lubrication |
L. Wang,R. J. K. Wood;H. E. G. Powrie;E. Streit;I. Care |
|
53418 |
| IGTI |
2004 |
A Numerical Simulation Capability for Analysis of Aircraft Inlet -- Engine Compatibility |
Alan Hale,Milt Davis,Jim Sirbaugh |
|
53473 |
| IGTI |
2004 |
Effectiveness of a Serpentine Inlet Duct Flow Control Technique at Design and Off-Design Simulated Flight Conditions |
Angie Rabe,Wing Ng,Ricardo Burdisso |
|
53475 |
| IGTI |
2004 |
A Probabilistic Assessment of NASA Ultra-Efficient Engine Technologies for a Large Subsonic Transport |
Michael T. Tong,Scott M. Jones;Philip C. Arcara Jr.;William J. Haller |
|
53485 |
| IGTI |
2004 |
Multi-Objective Robust Optimization of Air Engine Using IOSO Technology |
Igor N. Egorov,Gennady V. Kretinin,Igor A. Leshchenko,Sergey V. Kuptzov |
|
53504 |
| IGTI |
2004 |
Aero-Gasturbine Emission Reduction and Simulation Technology: Philosophy and Approach |
Savad A. Shakariyants,Jos P. van Buijtenen;Wilfried P. J. Visser |
|
53521 |
| IGTI |
2004 |
Generic Geometry Definition of the Aircraft Engine Combustion Chamber |
Savad A. Shakariyants,Jos P. van Buijtenen;Wilfried P. J. Visser |
|
53522 |
| IGTI |
2004 |
Preparations for Smart Sensor Usage in Aircraft Gas Turbine Testing |
Grant Patterson,Mike Bennett,Andy Nelius,William Irby;Owen Boals |
|
53601 |
| IGTI |
2004 |
Factors Affecting the Behaviour and Efficiency of a Targeted Jet Delivering Oil to a Bearing Lubrication System |
C. W. Lee,G. R. Johnson,P. C. Palma,K. Simmons,S. J. Pickering |
|
53606 |
| IGTI |
2004 |
A Generic Approach for Gas Turbine Adaptive Modeling |
W. P. J. Visser;O. Kogenhop,M. Oostveen |
|
53721 |
| IGTI |
2004 |
LES of the Flow and Particle Ingestion Into an Air Intake of a Jet Engine Running on the Ground |
Dragos Moroinu;Arne Karsllon;Laszlo Fuchs |
|
53762 |
| IGTI |
2004 |
Multi-Fidelity Simulation of a Turbofan Engine With Results Zoomed Into Mini-Maps for a Zero-D Cycle Simulation |
Mark G. Turner;John A. Reed;Robert Ryder;Joseph P. Veres |
|
53956 |
| IGTI |
2004 |
Introduction of Residual Stresses to Enhance Fatigue Performance in the Initial Design |
Paul Prevey,N. Jayaraman;Ravi Ravindranath |
|
53971 |
| IGTI |
2004 |
Comparison of Turbine Tip Leakage Flow for Flat Tip and Squealer Tip Geometries at High-Speed Conditions |
Nicole L. Key,Tony Arts |
|
53979 |
| IGTI |
2004 |
Adiabatic and Overall Effectiveness for a Film Cooled Blade |
Jason E. Albert,David G. Bogard;Frank Cunha |
|
53998 |
| IGTI |
2004 |
Ongoing Development and Recent Results of the Research in the Swedish Gas Turbine Centre (GTC) |
Sven Gunnar Sundkvist;Michael Andersson,Bogdan Gherman;Andreas Sveningsson;Damian Vogt |
|
54134 |
| IGTI |
2004 |
Numerical Study of an Inlet Particle Separator |
A. Ghenaiet;S. C. Tan |
|
54168 |
| IGTI |
2004 |
Study of Erosion Effects on an Axial Fan Global Range of Operation |
A. Ghenaiet;S. C. Tan;R. L. Elder |
|
54169 |
| IGTI |
2004 |
A Numerical Investigation of the Effects of Steam Ingestion on Compression System Performance |
Jason Klepper,Alan Hale,Milt Davis;Wayne Hurwitz |
|
54190 |
| IGTI |
2004 |
History, Philosophy, Physics, and Future Directions of Aircraft Propulsion System/Inlet Integration |
William T. Cousins |
|
54210 |
| IGTI |
2004 |
Assessing Fan and Compressor Blade HCF Sensitivity to Non-Uniform Inlet Flows |
Robert M. Wallace,Peter S. King;James Kenyon;Walter F. O'Brien |
|
54264 |
| IGTI |
2004 |
Turbine Blade Surface Deterioration by Erosion |
Widen Tabakoff;Richard B. Rivir;Kaushik Das,Puneet Arora |
|
54328 |
| IGTI |
2004 |
Wear Resistant Polymer Matrix Composites for Aerospace Applications |
Subhash K. Naik;James K. Sutter;Widen Tabakoff;Robert G. Siefker;Harold S. Haller;Randall J. Cupp;Kazuhisa Miyoshi |
|
54330 |
| IGTI |
2004 |
The Development of Innovative Methods for Erosion Testing a Russian Coating on GE T64 and T58 Gas Turbine Engine Compressor Blades |
Mark Klein;Gray Simpson |
|
54336 |
| IGTI |
2004 |
Numerical Predication of Swept Blade Aerodynamic Effects |
C. Xu,R. S. Amano |
|
53008 |
| IGTI |
2004 |
Effect of Coriolis and Centrifugal Forces on Turbulence and Heat Transfer at High Rotation and Buoyancy Numbers in a Rib-Roughened Internal Cooling Channel |
A. K. Sleiti,J. S. Kapat |
|
53018 |
| IGTI |
2004 |
Computational Study of Parameters Affecting Turbulent Flat Plate Film Cooling |
Mohammad Taeibi-Rahni,Shadi Mahjoob |
|
53027 |
| IGTI |
2004 |
Fluid Flow and Heat Transfer in Rotating Curved Duct at High Rotation and Density Ratios |
A. K. Sleiti,J. S. Kapat |
|
53028 |
| IGTI |
2004 |
Investigation of the Conjugate Convective-Conductive Thermal Behaviour of a Rib-Roughened Internal Cooling Channel |
Roberto Fedrizzi,Tony Arts |
|
53046 |
| IGTI |
2004 |
Film Cooling in Unsteady Flow With Separation Bubble |
M. Deinert,J. Hourmouziadis |
|
53075 |
| IGTI |
2004 |
Aerothermal Investigations on Turbine Endwalls and Blades (AITEB) |
F. Haselbach,H. P. Schiffer |
|
53078 |
| IGTI |
2004 |
Parametric Effects on Heat Transfer of Impingement on Dimpled Surface |
Koonlaya Kanokjaruviji,Ricardo F. Martinez-Botas |
|
53142 |
| IGTI |
2004 |
Preliminary Evaluation of Turbulence Level Influence in Heat Transfer Measurements |
Carlo Carcasci,Luca Innocenti,Marco Surace |
|
53151 |
| IGTI |
2004 |
Pedestal and Endwall Contribution in Heat Transfer in Thin Wedge Shaped Trailing Edge |
Bruno Facchini,Luca Innocenti,Lorenzo Tarchi |
|
53152 |
| IGTI |
2004 |
Gas Turbine Combustor Heat Shield Impingement Cooling Baffle |
Ardeshir Riahi,Fred G. Borns |
|
53160 |
| IGTI |
2004 |
Investigation of a High Aspect Ratio Rectangular Channel With High Blockage Ratio Round-Corner Ribs |
Christophe Diette;Tony Arts;Olivier Sgarzi;Emmanuel Laroche |
|
53163 |
| IGTI |
2004 |
Flowfield and Pressure Measurements in a Rotating Two-Pass Duct With Staggered Rounded Ribs Skewed 45 degrees to the Flow |
Tong-Miin Liou,Yi-Sian Hwang,Yi-Chen Li |
|
53173 |
| IGTI |
2004 |
Conjugate Heat Transfer Modelling in Film Cooled Blades |
F. Montomoli,P. Adami,S. Della Gatta,F. Martelli |
|
53177 |
| IGTI |
2004 |
Experimental and Numerical Investigation of Stationary Ribbed Ducts |
A. Magi,F. Montomoli,P. Adami,C. Carcasci |
|
53180 |
| IGTI |
2004 |
Optimization of the Rib Structure Inside a 2D Cooling Channel |
Andrea Haasenritter,Bernhard Weigand |
|
53187 |
| IGTI |
2004 |
Numerical Prediction of Film Cooling and Heat Transfer With Different Film-Hole Arrangements on the Plane and Squealer Tip of a Gas Turbine Blade |
Huitao Yang,Hamn-Ching Chen,Je-Chin Han |
|
53199 |
| IGTI |
2004 |
High Coverage Blade Tip Film Cooling |
M. Kuwabara,Keizo Tsukagoshi;T. Arts |
|
53226 |
| IGTI |
2004 |
The Effect of Freestream Turbulence on Film Cooling Heat Transfer Coefficient and Adiabatic Effectiveness Using Compound Angle Holes |
James E. Mayhew;James W. Baughn;Aaron R. Byerley |
|
53230 |
| IGTI |
2004 |
Experimental Study of the Flow and Thermal Development of a Row of Cooling Jets Impinging on a Rotating Concave Surface |
Hector Iacovides,Diamantis Kounadis,Brian E. Launder;Jiankang Li;Zeyuan Xu |
|
53244 |
| IGTI |
2004 |
Turbulent Flow and Heat Transfer in Stationary and Rotating Cooling Passages With Inclined Ribs on Opposite Walls |
Hector Iacovides;Mehrdad Raisee |
|
53245 |
| IGTI |
2004 |
Effectiveness of Normal and Angled Slot Cooling |
A. C. Smith,J. H. Hatchett,A. C. Nix,W. F. Ng,K. A. Thole;Frank J. Cunha |
|
53248 |
| IGTI |
2004 |
Film-Cooling Effectiveness on a Gas Turbine Blade Using Pressure Sensitive Paint |
Jaeyong Ahn,Shantanu Mhetras,Je-Chin Han |
|
53249 |
| IGTI |
2004 |
Measured Adiabatic Effectiveness and Heat Transfer for Blowing From the Tip of a Turbine Blade |
J. Christophel,E. Couch,K. A. Thole;F. J. Cunha |
|
53250 |
| IGTI |
2004 |
Cooling the Tip of a Turbine Blade Using Pressure Side Holes: Part 1 -- Adiabatic Effectiveness Measurements |
J. R. Christophel,K. A. Thole;F. J. Cunha |
|
53251 |
| IGTI |
2004 |
Cooling the Tip of a Turbine Blade Using Pressure Side Holes: Part 2 -- Heat Transfer Measurements |
J. R. Christophel,K. A. Thole;F. J. Cunha |
|
53254 |
| IGTI |
2004 |
Gas Turbine Engine Durability Impacts of High-Fuel-Air Ratio Combustors: Near Wall Reaction Effects on Film-Cooled Backward-Facing Step Heat Transfer |
David W. Milanes,Daniel R. Kirk,Krzysztof J. Fidkowski,Ian A. Waitz |
|
53259 |
| IGTI |
2004 |
Experimental Measurements and Modeling of the Effects of Large-Scale Freestream Turbulence on Heat Transfer |
A. C. Nix,T. E. Diller,W. F. Ng |
|
53260 |
| IGTI |
2004 |
Heat Transfer in Two-Pass Rotating Rectangular Channels (AR=1:2 and AR=1:4) With 45 degrees Angled Rib Turbulators |
Wen-Lung Fu,Lesley M. Wright,Je-Chin Han |
|
53261 |
| IGTI |
2004 |
Experimental and Computational Investigation of Heat Transfer Effectiveness and Pressure Distribution of a Shrouded Blade Tip Section |
Nirm V. Nirmalan,Jeremy C. Bailey,Mark E. Braaten |
|
53279 |
| IGTI |
2004 |
Heat Transfer Analysis of a Wedge Shaped Duct With Pin Fin and Pedestal Arrays: A Comparison Between Numerical and Experimental Results |
Antonio Andreini,Carlo Carcasci,Andrea Magi |
|
53319 |
| IGTI |
2004 |
Simulated Land-Based Turbine Deposits Generated in an Accelerated Deposition Facility |
Jared W. Jensen,Sean W. Squire,Jeffrey P. Bons,Thomas H. Fletcher |
|
53324 |
| IGTI |
2004 |
Adiabatic Effectiveness Measurements of Endwall Film-Cooling for a First Stage Vane |
D. G. Knost,K. A. Thole |
|
53326 |
| IGTI |
2004 |
Modeling and Validation of the Thermal Effects on Gas Turbine Transients |
Annette E. Nielsen,Christoph W. Moll;Stephan Staudacher |
|
53344 |
| IGTI |
2004 |
Optimization of Three-Dimensional Angled Ribs With RANS Analysis of Turbulent Heat Transfer |
Hong-Min Kim,Kwang-Yong Kim |
|
53346 |
| IGTI |
2004 |
Flowfield Measurements in a Ribbed Channel Relevant to Internal Turbine Blade Cooling |
A. Graham,E. Sewall,K. A. Thole |
|
53361 |
| IGTI |
2004 |
On Annulus Flow Characteristics and Performance of Dilution Holes in a Gas Turbine Combustor |
M. D. Agrawal;Sanjeev Bharani |
|
53376 |
| IGTI |
2004 |
Analytical Approach to Steam Turbine Heat Transfer in a Combined Cycle Power Plant |
Howard M. Brilliang,Anil K. Tolpadi |
|
53387 |
| IGTI |
2004 |
Large Eddy Simulation of Flow and Heat Transfer in a Channel Roughened by Square or Semicircle Ribs |
Joon Ahn,Haecheon Choi,Joon Sik Lee |
|
53401 |
| IGTI |
2004 |
Effects of Tip Gap Film Injection From Plain and Squealer Blade Tips |
Hasan Nasir,Srinath V. Ekkad;Ronald Bunker,Chander Prakash |
|
53455 |
| IGTI |
2004 |
A Low-Re RSTM Model for Computations of Heat Transfer and Fluid Flow for Impingement and Convective Cooling |
Rongguang Jia,Bengt Sunden |
|
53459 |
| IGTI |
2004 |
Aerodynamic and Heat-Flux Measurements With Predictions on a Modern One and 1/2 Stage High Pressure Transonic Turbine |
Charles W. Haldeman,Michael G. Dunn;John W. Barter,Brian R. Green,Robert F. Bergholz |
|
53478 |
| IGTI |
2004 |
Internal Cooling in 4:1 AR Passages at High Rotation Numbers |
Fuguo Zhou;Jonathan Lagrone,Sumanta Acharya |
|
53501 |
| IGTI |
2004 |
Direct Numerical Simulation of a Film Cooling Jet |
Frank Muldoon,Sumanta Acharya |
|
53502 |
| IGTI |
2004 |
Heat Transfer Characteristic Inside Two-Pass Variable Cross-Section Channels With Ribs and Bleeding Holes |
Xiangyun Liu,Shuiting Ding,Zhi Tao,Guoqiang Xu |
|
53529 |
| IGTI |
2004 |
An Investigation of Duct Aspect Ratio Effects on Heat/Mass Transfer in a Rotating Duct With 90 degrees Ribs |
Kyung Min Kim,Yun Young Kim,Dong Ho Rhee,Hyung Hee Cho |
|
53533 |
| IGTI |
2004 |
Features of a Cooling System Simulation Tool Used in Industrial Preliminary Design Stage |
Stefano Zecchi,Lorenzo Arcangeli,Bruno Facchini;Daniele Coutandin |
|
53547 |
| IGTI |
2004 |
Numerical Analysis of Crossflow and Single Jet Impinging on a Heated Surface With Shaped Groove |
Stefano Zecchi,Alessandro Bacci |
|
53549 |
| IGTI |
2004 |
Expansion Line Modeling and Strength Diagnostics of Internally Cooled Gas Turbines |
Tadeusz Chmielniak,Wojciech Kosman |
|
53550 |
| IGTI |
2004 |
The Transient Liquid Crystal Technique: Influence of Surface Curvature and Finite Wall Thickness |
G. Wagner,M. Kotulla,P. Ott;B. Weigand,J. von Wolfersdorf |
|
53553 |
| IGTI |
2004 |
Detailed Flow Investigation Using PIV in a Typical Turbine Cooling Geometry With Ribbed Walls |
M. Elfert,M. P. Jarius;B. Weigand |
|
53566 |
| IGTI |
2004 |
Evaluation of Predicted Heat Transfer on a Transonic Blade Using V2-f Models |
Ali A. Ameri,Kumud Ajmani |
|
53572 |
| IGTI |
2004 |
Computations of Flow Field and Heat Transfer in a Stator Vane Passage Using the V2 - f Turbulence Model |
Andreas Sveningsson,Lars Davidson |
|
53586 |
| IGTI |
2004 |
Developing a Combustor Simulator for Investigating High Pressure Turbine Aerodynamics and Heat Transfer |
M. D. Barringer,K. A. Thole;M. D. Polanka |
|
53613 |
| IGTI |
2004 |
CFD Heat Transfer Predictions for a High-Pressure Turbine Stage |
James A. Tallman |
|
53654 |
| IGTI |
2004 |
Flow Characteristics Within and Downstream of Spherical and Cylindrical Dimple on a Flat Plate at Low Reynolds Numbers |
A. Khalatov;A. Byerley;D. Ochoa;Seong-Ki Min |
|
53656 |
| IGTI |
2004 |
Computation of Flow and Heat Transfer in Two-Pass Rotating Rectangular Channels (AR=1:1, AR=1:2, AR=1:4) With 45-deg. Angled Ribs by Reynolds Stress Turbulence Model |
Guoguang Su,Hamn-Ching Chen,Je-Chin Han;James D. Heidmann |
|
53662 |
| IGTI |
2004 |
Heat Transfer and Pressure Drop Characteristics of Finned Tube Banks in Heat Exchanger for Gas Turbine |
K. Kawaguchi,K. Okui;Y. Hasegawa |
|
53665 |
| IGTI |
2004 |
Large Eddy Simulation of Flow and Heat Transfer in a Rectangular Channel With Crossed Angled Ribs |
Toshihiko Takahashi,Kazunori Watanabe |
|
53673 |
| IGTI |
2004 |
Conjugate Simulation of Flow and Heat Conduction With a New Method for Faster Calculation |
Takashi Yamane,Toyoaki Yoshida,Shunji Enomoto,Ryoji Takaki,Kazuomi Yamamoto |
|
53680 |
| IGTI |
2004 |
Effect of Hole Arrangements on Local Heat/Mass Transfer for Impingement/Effusion Cooling With Small Hole Spacing |
Hyung-Hee Cho,Dong Ho Rhee;R. J. Goldstein |
|
53685 |
| IGTI |
2004 |
Local Heat/Mass Transfer With Various Rib Arrangements in Impingement/Effusion Cooling System With Crossflow |
Dong Ho Rhee,Yong Woo Nam,Hyung Hee Cho |
|
53686 |
| IGTI |
2004 |
Measurement and Simulation of the Transonic Innovative Cooling System (ICS) for High-Temperature Transonic Gas Turbine Stages |
E. Gottlich;L. Innocenti,A. Vacca;W. Sanz,J. Woisetschlager;B. Facchini;H. Jericha;E. Rossi |
|
53712 |
| IGTI |
2004 |
Conjugate Calculations for a Film-Cooled Blade Under Different Operating Conditions |
Karsten Kusterer;Dieter Bohn;Takao Sugimoto;Ryozo Tanaka |
|
53719 |
| IGTI |
2004 |
Influence of the 180 degrees Bend Geometry on the Pressure Loss and Heat Transfer in a High Aspect Ratio Rectangular Smooth Channel |
Detlef Pape,Herve Jeanmart,Jens von Wolfersdorf,Bernhard Weigand |
|
53753 |
| IGTI |
2004 |
Large Eddy Simulation of Flow and Heat Transfer in a 90 degrees Ribbed Duct With Rotation: Effect of Coriolis Forces |
Samer Abdel-Wahab,Danesh K. Tafti |
|
53796 |
| IGTI |
2004 |
Large Eddy Simulation of Flow and Heat Transfer in a 90 degrees Ribbed Duct With Rotation: Effect of Coriolis and Centrifugal Buoyancy Forces |
Samer Abdel-Wahab,Danesh K. Tafti |
|
53799 |
| IGTI |
2004 |
Large Eddy Simulation of Flow and Heat Transfer in a Staggered 45 degrees Ribbed Duct |
Samer Abdel-Wahab,Danesh K. Tafti |
|
53800 |
| IGTI |
2004 |
Large Eddy Simulation of the Developing Region of a Stationary Ribbed Internal Turbine Blade Cooling Channel |
Evan A. Sewall,Danesh K. Tafti |
|
53832 |
| IGTI |
2004 |
Large Eddy Simulation of the Developing Region of a Rotating Ribbed Internal Turbine Blade Cooling Channel |
Evan A. Sewall,Danesh K. Tafti |
|
53833 |
| IGTI |
2004 |
Unsteady Heat Transfer Measurements From Transonic Turbine Blades at Engine Representative Conditions in a Transient Facility |
William Allan;Roger Ainsworth,Steven Thorpe |
|
53835 |
| IGTI |
2004 |
Infrared Thermography With In-Situ Calibration Using Thermochromic Liquid Crystals Applied to Film Cooling |
Dennis Brauckmann,Jens von Wolfersdorf |
|
53855 |
| IGTI |
2004 |
Turbulent Augmentation of Internal Convection Over Pins in Staggered Pin Fin Arrays |
F. E. Ames,L. A. Dvorak,M. J. Morrow |
|
53889 |
| IGTI |
2004 |
Large Eddy Simulations of Flow and Heat Transfer in Rotating Ribbed Duct Flows |
Mayank Tyagi,Sumanta Acharya |
|
53924 |
| IGTI |
2004 |
Heat/Mass Transfer in a 4:1 AR Smooth and Ribbed Coolant Passage With Rotation at 90-Degree and 45-Degree Orientations |
S. Acharya,P. Agarwal,D. E. Nikitopoulos |
|
53928 |
| IGTI |
2004 |
Turbine Heat Transfer and Aerodynamic Measurements and Predictions for a 1.5 Stage Configuration |
Kam S. Chana,Udai K. Singh;Thomas Povey |
|
53951 |
| IGTI |
2004 |
Latticework (Vortex) Cooling Effectiveness: Part 2 -- Rotating Channel Experiments |
S. Acharya,Fuguo Zhou;Jonathan Lagrone,Gazi Mahmood;Ronald S. Bunker |
|
53983 |
| IGTI |
2004 |
Unsteady RANS Simulation of Turbulent Flow and Heat Transfer in Ribbed Coolant Passages of Different Aspect Ratio |
A. K. Saha,S. Acharya |
|
53986 |
| IGTI |
2004 |
Effects of Hot Streaks on Adiabatic Effectiveness for a Film Cooled Turbine Vane |
Krishnakumar Varadarajan,David G. Bogard |
|
54016 |
| IGTI |
2004 |
The Effects of the Vane and Mainstream Turbulence Level on Hot Streak Attenuation |
Sean C. Jenkins,David G. Bogard |
|
54022 |
| IGTI |
2004 |
Numerical Study of the Effect of Blowing Angle on Cooling Effectiveness of an Effusion Cooling |
Yaping Hu,Honghu Ji |
|
54043 |
| IGTI |
2004 |
Thermal Performance of Angled, V-Shaped, and W-Shaped Rib Turbulators in Rotating Rectangular Cooling Channels (AR = 4:1) |
Lesley M. Wright,Wen-Lung Fu,Je-Chin Han |
|
54073 |
| IGTI |
2004 |
Performance Investigation of Film and Transpiration Cooling |
J. H. Wang,J. Messner,M. V. Casey |
|
54132 |
| IGTI |
2004 |
Latticework (Vortex) Cooling Effectiveness: Part 1 -- Stationary Channel Experiments |
Ronald S. Bunker |
|
54157 |
| IGTI |
2004 |
Enhanced Impingement Heat Transfer: The Influence of Impingement X/D for Interrupted Rib Obstacles (Rectangular Pin Fins) |
G. E. Andrews,R. A. A. Abdul Husain,M. C. Mkpadi |
|
54184 |
| IGTI |
2004 |
Comparison of Thermo-Hydraulic Characteristics for Two Types of Dimpled Surfaces |
Artem Khalatov,Igor Borisov,Sergei Kobzar;B. Glezer |
|
54204 |
| IGTI |
2004 |
Mist/Steam Heat Transfer of Multiple Rows of Impinging Jets |
Ting Wang;J. Leo Gaddis;Xianchang Li |
|
54206 |
| IGTI |
2004 |
Conjugate Heat Transfer Simulation of a Radially Cooled Gas Turbine Vane |
Bruno Facchini,Andrea Magi,Alberto Scotti Del Greco |
|
54213 |
| IGTI |
2004 |
Measurements, Computation and Analysis of a Semi-Constrained, Axisymmetric Impinging Jet |
David A. Adolfson,Terrence W. Simon;Mounir B. Ibrahim |
|
54215 |
| IGTI |
2004 |
Nusselt Numbers and Flow Structure on and Above Shallow Dimpled Surface Within a Channel Including Effects of Inlet Turbulence Intensity Level |
P. M. Ligrani,N. K. Burgess,S. Y. Won |
|
54231 |
| IGTI |
2004 |
Effects of Dimple Depth on Nusselt Numbers and Friction Factors for Internal Cooling in a Channel |
N. K. Burgess,P. M. Ligrani |
|
54232 |
| IGTI |
2004 |
A Transient Infrared Thermography Method for Simultaneous Film Cooling Effectiveness and Heat Transfer Coefficient Measurements From a Single Test |
Srinath V. Ekkad;Shichuan Ou,Richard B. Rivir |
|
54236 |
| IGTI |
2004 |
In-Wall Network (Mesh) Cooling Augmentation of Gas Turbine Airfoils |
Ronald S. Bunker,Jeremy C. Bailey;Ching-Pang Lee;Charles W. Stevens |
|
54260 |
| IGTI |
2004 |
Three Dimensional Measurements of Instantaneous Flow Field in Corners With Smooth Surfaces Under a Zero Pressure Gradient |
Michael Phillips,Steve Deutsch,Arnie Fontaine,Savas Yavuzkurt |
|
54304 |
| IGTI |
2004 |
Predictions for the Effects of Freestream Turbulence on Turbine Blade Heat Transfer |
R. J. Boyle;Forrest E. Ames;P. W. Giel |
|
54332 |
| IGTI |
2004 |
Surface Roughness Effects on External Heat Transfer of a HP Turbine Vane |
M. Stript,A. Schulz,Sigmar Wittig |
|
53114 |
| IGTI |
2004 |
Numerical Investigation of Unsteady Boundary Layer Transition Induced by Periodically Passing Wakes With an Intermittency Transport Equation |
Rene Pecnik,Wolfgang Sanz,Paul Pieringer |
|
53204 |
| IGTI |
2004 |
Studies on Bypass Transition of a Boundary Layer Subjected to Localized Periodic External Disturbances |
K. Funazaki,Y. Wakita,T. Otsuki |
|
53305 |
| IGTI |
2004 |
Transition on Concave Surfaces |
Antonis Dris,Mark W. Johnson |
|
53352 |
| IGTI |
2004 |
Predicting Transitional Separation Bubbles |
John A. Redford,Mark W. Johnson |
|
53353 |
| IGTI |
2004 |
Separated Flow Transition Mechanism and Prediction With High and Low Freestream Turbulence Under Low Pressure Turbine Conditions |
Ralph J. Volino,Douglas G. Bohl |
|
53360 |
| IGTI |
2004 |
A Correlation-Based Transition Model Using Local Variables: Part I -- Model Formulation |
F. R. Menter,R. B. Langtry;S. R. Likki,Y. B. Suzen,P. G. Huang;S. Volker |
|
53452 |
| IGTI |
2004 |
A Correlation-Based Transition Model Using Local Variables: Part II -- Test Cases and Industrial Applications |
R. B. Langtry,F. R. Menter;S. R. Likki,Y. B. Suzen,P. G. Huang;S. Volker |
|
53454 |
| IGTI |
2004 |
Modeling of Boundary-Layer Transition |
S. K. Roberts,M. I. Yaras |
|
53664 |
| IGTI |
2004 |
Boundary-Layer Transition in Separation Bubbles Over Rough Surfaces |
S. K. Roberts,M. I. Yaras |
|
53667 |
| IGTI |
2004 |
Boundary-Layer Transition Over Rough Surfaces With Elevated Free-Stream Turbulence |
S. K. Roberts,M. I. Yaras |
|
53668 |
| IGTI |
2004 |
Prediction of Turbulence and Transition in Turbomachinery Flows Using an Innovative Second Moment Closure Modeling |
Domenico Borello,Franco Rispoli;Kemal Hanjalic |
|
53706 |
| IGTI |
2004 |
Experimental Analysis and Prediction of Wake-Induced Transition in Turbomachinery |
Witold Elsner;Stephane Vilmin;Stanislaw Drobniak,Wladyslaw Piotrowski |
|
53757 |
| IGTI |
2004 |
Investigation of a High Lift LP Turbine Blade Submitted to Passing Wakes: Part 1 -- Profile Loss and Heat Transfer |
Thomas Coton,Tony Arts |
|
53768 |
| IGTI |
2004 |
Investigation of a High Lift LP Turbine Blade Submitted to Passing Wakes: Part 2 -- Boundary Layer Transition |
Thomas Coton,Tony Arts |
|
53781 |
| IGTI |
2004 |
Predicting Transition in Turbomachinery: Part I -- A Review and New Model Development |
T. J. Praisner;J. P. Clark |
|
54108 |
| IGTI |
2004 |
Predicting Transition in Turbomachinery: Part II -- Model Validation and Benchmarking |
T. J. Praisner,E. A. Grover,M. J. Rice;J. P. Clark |
|
54109 |
| IGTI |
2004 |
High Frequency Surface Heat Flux Imaging of Bypass Transition |
Richard J. Anthony;Terry V. Jones;John E. LaGraff |
|
54162 |
| IGTI |
2004 |
Evaluation of Algebraic Transition Models for Application to Unsteady Flows in Low-Pressure Turbines |
Nan Jiang,Terrence W. Simon |
|
54223 |
| IGTI |
2004 |
A Novel Cooling Method for Turbine Rotor-Stator Rim Cavities Affected by Mainstream Ingress |
Y. Okita,M. Nishiura,S. Yamawaki,Y. Hironaka |
|
53016 |
| IGTI |
2004 |
Development of Higher Temperature Abradable Seals for Gas Turbine Applications |
Raymond E. Chupp,Yuk-Chiu Lau,Farshad Ghasripoor,Donald J. Baldwin;Chek Ng,Tara McGovern,Dalero Berkeley |
|
53029 |
| IGTI |
2004 |
Dust Separation in a Gas Turbine Pre-Swirl Cooling Air System: A Parameter Variation |
O. Schneider,H. J. Dohmen,F. K. Benra;D. Brillert |
|
53048 |
| IGTI |
2004 |
Study of Airflow Features Through Step Seals in the Presence of Dis-Engagement Due to Axial Movement |
Yi Wang,Colin Young,Guy Snowsill,Tim Scanlon |
|
53056 |
| IGTI |
2004 |
Measurement and Analysis of an Efficient Turbine Rotor Pump Work Reduction System Incorporating Pre-Swirl Nozzles and a Free Vortex Pressure Augmentation Chamber |
V. Laurello;M. Yuri,K. Fujii,K. Ishizaka,T. Nakamura,H. Nishimura |
|
53090 |
| IGTI |
2004 |
A Simple Method for Estimating Ingestion of Annulus Gas Into a Turbine Rotor Stator Cavity in the Presence of External Pressure Variations |
T. Scanlon,J. Wilkes;D. Bohn;O. Gentilhomme |
|
53097 |
| IGTI |
2004 |
Influence of Fluid-Dynamics on Heat Transfer in a Pre-Swirl Rotating-Disc System |
Gary D. Lock,Michael Wilson,J. Michael Owen |
|
53158 |
| IGTI |
2004 |
Numerical Simulation of 3D Bristle Bending in Brush Seals |
Cesare Guardino;John W. Chew |
|
53176 |
| IGTI |
2004 |
Probabilistic Analysis of a Turbofan Secondary Flow System |
David Cloud;Ethan Stearns |
|
53197 |
| IGTI |
2004 |
Buoyancy-Induced Flow in a Heated Rotating Cavity |
J. Michael Owen;Jonathan Powell |
|
53210 |
| IGTI |
2004 |
The Influence of Incidence Angle on the Discharge Coefficient for Rotating Radial Orifices |
A. Idris,K. R. Pullen,R. Read |
|
53237 |
| IGTI |
2004 |
A Non-Coupled CFD-FE Procedure to Evaluate Windage and Heat Transfer in Rotor-Stator Cavities |
Leo V. Lewis,James I. Provins |
|
53246 |
| IGTI |
2004 |
Wear Prediction of Strip Seals Through Conductance |
Farshad Gharispoor,Norman A. Turnquist;Mark Kowalczyk,Bernard Couture |
|
53297 |
| IGTI |
2004 |
On Fields Synergism and Convective Heat Transfer Enhancement and Control in Centrifugal Force Field |
Honghu Ji |
|
53301 |
| IGTI |
2004 |
Experiments on Gas Ingestion Through Axial-Flow Turbine Rim Seals |
R. P. Roy,J. Feng,D. Narzary,P. Saurabh;R. E. Paolillo |
|
53394 |
| IGTI |
2004 |
Oil Pumping in High Speed and High Loaded Ball Bearings |
Michael Flouros |
|
53406 |
| IGTI |
2004 |
Measurements of Surface Temperature Distribution in a Rotating Disk With Blade Cooling Holes Using Thermochromic Liquid Crystal |
Chong Zhang,Guoqiang Xu,Shuiting Ding,Zhi Tao |
|
53519 |
| IGTI |
2004 |
Investigation of Flow and Heat Transfer Instabilities in a Rotating Cavity With Axial Throughflow of Cooling Air |
Shuqing Tian,Zhi Tao,Shuiting Ding,Guoqiang Xu |
|
53525 |
| IGTI |
2004 |
Numerical Simulation of Natural Convection in Stationary and Rotating Cavities |
Sun Zixiang;Alistair Kilfoil;John W. Chew;Nicholas J. Hills |
|
53528 |
| IGTI |
2004 |
Advanced Transmission and Oil System Concepts for Modern Aero-Engines |
M. Klingsporn |
|
53578 |
| IGTI |
2004 |
Prediction of Velocities and Heat Transfer Coefficients in a Rotor-Stator Cavity |
Justin Evans;Lon M. Stevens,Clint Bodily,Moon-Kyoo Brian Kang |
|
53639 |
| IGTI |
2004 |
A Numerical Model for Oil Film Flow in an Aero-Engine Bearing Chamber and Comparison With Experimental Data |
Mark Farrall,Kathy Simmons,Stephen Hibbert;Philippe Gorse |
|
53698 |
| IGTI |
2004 |
Influence of Operating Condition and Geometry on the Oil Film Thickness in Aero-Engine Bearing Chambers |
P. Gorse;S. Busam;K. Dullenkopf |
|
53708 |
| IGTI |
2004 |
Numerical Simulation of the Unsteady Flow Field in an Axial Gas Turbine Rim Seal Configuration |
Ralf Jakoby,Thomas Zierer;Klas Lindblad,Jonas Larsson;Laurent deVito;Dieter E. Bohn,Joachim Funcke,Achim Decker |
|
53829 |
| IGTI |
2004 |
Leakage and Power Loss Test Results for Competing Turbine Engine Seals |
Margaret P. Proctor,Irebert R. Delgado |
|
53935 |
| IGTI |
2004 |
Investigation Into the Computational Analysis of Direct-Transfer Pre-Swirl Systems for Gas Turbine Cooling |
A. C. Benim,D. Brillert,M. Cagan |
|
54151 |
| IGTI |
2004 |
Flow Characteristics and Stability Analysis of Variable-Density Rotating Flows in Compressor-Disk Cavities |
Bruce V. Johnson;J. D. Lin;William A. Daniels,Roger Paolillo |
|
54279 |
| IGTI |
2004 |
Non-Metallic Brush Seals for Gas Turbine Bearings |
Nitin Bhate;Anthony C. Thermos;Mahmut Aksit;Mehmet Demiroglu;Huseyin Kizil |
|
54296 |
| IGTI |
2004 |
Flow Stability of Heat Recovery Steam Generators |
Heimo Walter,Wladimir Linzer |
|
53040 |
| IGTI |
2004 |
A Parametric Study of Interstage Injection on GE Frame 7EA Gas Turbine |
M. Bagnoli,M. Bianchi,F. Melino,A. Peretto,P. R. Spina;R. Bhargava;S. Ingistov |
|
53042 |
| IGTI |
2004 |
Technical and Economical Feasibility of Gas Turbine Inlet Cooling Using Evaporative Fogging System in Two Different Locations in Oman |
Yousif H. Zurigat;Belal Dawoud;Jamal N. Al-Bortmany,Sameh T. Al-Shihabi |
|
53122 |
| IGTI |
2004 |
Investigation of the Two-Phase Flow Field of the GTX100 Compressor Inlet During Off-Line Washing |
Ulf Engdar,Raik C. Orbay,Magnus K. Genrup,Jens Klingmann |
|
53141 |
| IGTI |
2004 |
A Review of Gas Turbine Online Washing Systems |
Friederike C. Mund,Pericles Pilidis |
|
53224 |
| IGTI |
2004 |
Performance of Integrated Combined and Cogeneration Cycles Using Latest Gas Turbines |
Sanjay;Onkar Singh;B. N. Prasad |
|
53312 |
| IGTI |
2004 |
A Review of L20A Engine Design and Field Operating Experience |
Takao Sugimoto,Katsushi Nagai,Masanori Ryu,Ryozo Tanaka,Takeshi Kimura |
|
53411 |
| IGTI |
2004 |
Set Up of a Robust Neural Network for Gas Turbine Simulation |
R. Bettocchi,M. Pinelli;P. R. Spina;M. Venturini,Michele Burgio |
|
53421 |
| IGTI |
2004 |
Numerical Investigation of Different Stack Design Solutions in a Cogeneration Power Plant |
M. Pinelli;G. Bucci |
|
53426 |
| IGTI |
2004 |
Experimental Inlet Air Cooling of a 75 kW Gas Turbine |
Andrew Banta |
|
53481 |
| IGTI |
2004 |
Effects of Spray Parameters and Operating Conditions on an Industrial Gas Turbine Washing System |
Friederike C. Mund,Pericles Pilidis |
|
53551 |
| IGTI |
2004 |
Corrugated Flute Filter Media Packaging Reduces Combustion Turbine Intake Air Filter System Size by 40% |
Thomas C. Gahr |
|
53558 |
| IGTI |
2004 |
Optimal Design of Gas Turbine Cogeneration Plants in Consideration of Discreteness of Equipment Capacities |
Ryohei Yokoyama,Koichi Ito |
|
53678 |
| IGTI |
2004 |
Optimal Operational Planning of Cogeneration Systems With Microturbine and Desiccant Air-Conditioning Units |
Satoshi Gamou,Koichi Ito,Ryohei Yokoyama |
|
53683 |
| IGTI |
2004 |
Selection and Sizing of Prime Movers in Combined Heat and Power Systems |
Sepehr Sanaye,Shahabeddin Shokrollahi |
|
53715 |
| IGTI |
2004 |
Thermal-Economic Evaluation of Evaporative Inlet Cooling Methods for Ray Gas Turbine Power Plant |
Sepehr Sanaye,Abbasali Farhad,Mohsen Ebrahimi |
|
53717 |
| IGTI |
2004 |
Optimization of the Managing Strategy of a Cogenerative Power Park in a Liberalized Market |
Paolo Silva,Stefano Campanari;Ennio Macchi;Stefano Delfino |
|
53744 |
| IGTI |
2004 |
The Upgraded Power Turbine for the Industrial Gas Turbine THM 1304 Development and First Operational Experience |
E. Aschenbruck,M. Beukenberg,M. Blaswich;Horst Bokelmann |
|
53785 |
| IGTI |
2004 |
Influence of High Fogging Systems on Gas Turbine Engine Operation and Performance |
Giovanni Cataldi,Harald Guntner;Charles Matz;Tom McKay,Jurgen Hoffmann,Anton Nemet;Stefan Lecheler;Jost Braun |
|
53788 |
| IGTI |
2004 |
Analysis of Optimal Unit Numbers and Sizes for Microturbine Cogeneration Systems |
Satoshi Gamou,Koichi Ito,Ryohei Yokoyama |
|
53793 |
| IGTI |
2004 |
Abradable Seals for Gas Turbines and Other Rotary Equipment |
Karel Hajmrle,Petr Fiala,Anthony P. Chilkowich,Lawrence T. Shiembob |
|
53865 |
| IGTI |
2004 |
Strategic Management of Technology for Power Generation Equipment: A System Dynamics Approach |
Flavio J. Franco |
|
53878 |
| IGTI |
2004 |
Combined Heat and Power Technologies: Application Studies of Options Including Micro Gas Turbines |
Miguel Angel Gonzalez,Roger Padilla;Reinhard Willinger |
|
53909 |
| IGTI |
2004 |
Wet Compression System Stability Analysis: Part I -- Wet Compression Moore Greitzer Transient Model |
Minghong Li,Qun Zheng |
|
54018 |
| IGTI |
2004 |
Wet Compression System Stability Analysis: Part II -- Simulations and Bifurcation Analysis |
Qun Zheng,Minghong Li |
|
54020 |
| IGTI |
2004 |
Design of a Gas Turbine Based Air Start Unit for Larger Aircraft Engine |
Li-Chieh Hsu,Wu-Chi Ho,Chien-Ching Hsueh |
|
54047 |
| IGTI |
2004 |
Thermodynamic Analysis of Intercooled Gas-Steam Combined and Steam Injected Gas Turbine Power Plants |
R. Yadav,Sunil Kumar Jumhare,Pradeep Kumar,Samir Saraswati |
|
54097 |
| IGTI |
2004 |
Thermodynamic Evaluation of Humidified Air Turbine (HAT) Cycles |
R. Yadav,Pawan Krishan Dwivedi,Pradeep Kumar,Samir Saraswati |
|
54098 |
| IGTI |
2004 |
A Parametric Analysis for Optimal Selection of Gas Turbine Cogeneration System |
K. Sarabchi,A. Ansari |
|
54317 |
| IGTI |
2004 |
The Use of Acoustic Emission Technology in Coating Ductility Testing at Various Temperatures |
Xin-Hai Li,Johan Moverare |
|
53054 |
| IGTI |
2004 |
Alloy Selection for Honeycomb Gas Path Seal Systems |
Dieter R. Sporer;Lawrence T. Shiembob |
|
53115 |
| IGTI |
2004 |
Degradation Mechanism Characterization and Remaining Life Prediction for NiCoCrAlY Coatings |
K. S. Chan,N. S. Cheruvu |
|
53383 |
| IGTI |
2004 |
The Influence of Metallurgical and Mechanical Pre-Damage on Creep-Crack and Fatigue-Crack Growth Rates of CrMoV Steel |
Masaru Sekihara,Shigeo Sakurai |
|
53399 |
| IGTI |
2004 |
High Vacuum Brazing of Fe-Cr-Al-Y Honeycomb |
Dieter R. Sporer;Ingo Reinkensmeier |
|
53407 |
| IGTI |
2004 |
Damage Analysis of Gas Turbine Vanes Using a Thermal Fluid Dynamic and Mechanical Approach |
Enrico Marchegiano,Giancarlo Benelli,Paolo Gheri;Donato Aquaro |
|
53763 |
| IGTI |
2004 |
Numerical Simulation of the Low Plasticity Burnishing Process for Fatigue Property Enhancement |
W. Beres;J. Li;P. C. Patnaik |
|
53925 |
| IGTI |
2004 |
Strain-Life Assessment of Grainex Mar-M 247 for NASA's Turbine Seal Test Facility |
Irebert R. Delgado;Gary R. Halford,Bruce M. Steinetz;Clare M. Rimnac |
|
53939 |
| IGTI |
2004 |
CM 939 Weldable(R) Alloy |
Ken Harris,Jacqueline B. Wahl |
|
53966 |
| IGTI |
2004 |
Improving Rough Cutting Efficiency for Machining of Impellers |
Min Tsay,Chien-Wen Chen |
|
54025 |
| IGTI |
2004 |
Life-Refurbishment of Service-Degraded Gas Turbine Buckets |
Yomei Yoshioka,Daizo Saito;Kazutoshi Ishibashi,Junji Ishii;Atsuhiko Izumi,Yasuhiro Aburatani;Akihiro Itou,Yukio Kagiya;Hirotaka Watanabe,Seiichi Hyakudome |
|
54040 |
| IGTI |
2004 |
The Coarsening Kinetic of [gamma]' Particles in Nickel-Based Superalloys During Aging at High Temperatures |
F. Mastromatteo;F. Niccolai,M. Giannozzi,U. Bardi |
|
54214 |
| IGTI |
2004 |
Progress on Environmentally Compliant Aluminum Ceramic Compressor Coatings |
Mark F. Mosser |
|
54294 |
| IGTI |
2004 |
Properties, Weldability, and Applications of Modern, Wrought, Heat-Resistant Alloys for Aerospace and Power Generation Industries |
M. D. Rowe,V. R. Ishwar,D. L. Klarstrom |
|
54309 |
| IGTI |
2004 |
TMF Crack Initiation Lifing of Austenitic Carbide Precipitating Alloys |
Magnus Hasselqvist |
|
54333 |
| IGTI |
2004 |
Enhanced TF40B Gas Turbine Engine Bleed Air Anti-Ice System (BAAS) Development |
Roger Yee;Lee Myers |
|
53164 |
| IGTI |
2004 |
Resultant Benefits of Standardized Overhaul Packages for LM2500 Propulsion Gas Turbine Engines in U.S. Navy Applications |
Matthew J. Driscoll,Joseph Picozzi |
|
53456 |
| IGTI |
2004 |
Metallurgical Analysis of Rainbow Rotor Coatings: Analysis of Fleet Blades |
Robert A. Neff,Gerald B. Katz;B. Nagaraj,Rachel Tarvin |
|
53461 |
| IGTI |
2004 |
Test and Evaluation of a Gas Turbine Electric Starter System |
Martin Quinones;James R. Gustafson,Kenneth A. Marks,Douglas Parsons,Richard Lapointe |
|
53476 |
| IGTI |
2004 |
On the Feasibility of Nuclear Versus Combustion Gas Turbine Propulsion for High-Speed Cargo Ships |
H. Boonstra,A. C. Groot;C. A. Prins |
|
53777 |
| IGTI |
2004 |
U.S. Navy Refinement of Electronic Fuel Controls and Air Assist Fuel Nozzles to Meet Upgraded Power Requirements for the 501-K34 Marine Gas Turbines |
Matthew G. Hoffman,Brian Connery,Helen J. Kozuhowski,Ivan Pineiro |
|
53868 |
| IGTI |
2004 |
Inlet Air Salt Concentration Detection on U.S. Navy Ship Service Gas Turbine Generator Sets |
Daniel E. Caguiat,Jennifer Connor;Edward Duckless;Richard J. DeCorso |
|
53984 |
| IGTI |
2004 |
Gas Turbine and Generator Test Experience in Support of the Advanced Hull Form Inshore Demonstrator (AHFID) |
Roger J. Carr Jr.,Denis Lison,Fred T. Willett |
|
54006 |
| IGTI |
2004 |
Understanding Royal Navy Gas Turbine Sea Water Lubricating Oil Cooler Failures When Caused by Microbial Induced Corrosion ('SRB') |
Richard Bolwell |
|
54063 |
| IGTI |
2004 |
Managing Reliability Improvement in the U.S. Navy's Marine Gas Turbine Generator Sets |
Dennis M. Russom,Keith Mummaw,Ivan Pineiro |
|
54122 |
| IGTI |
2004 |
Detection and Localization of Fouling in a Gas Turbine Compressor From Aerothermodynamic Measurements |
Knox T. Millsaps;Jon Baker;Jeffrey S. Patterson |
|
54173 |
| IGTI |
2004 |
Thermodynamic Analysis of 'Inter-Turbine'' and 'Intra-Turbine'' Reheat for Marine Gas Turbines |
Knox T. Millsaps;Bruce Rodman |
|
54174 |
| IGTI |
2004 |
Insertion of Electrostatically Charged Fuel Atomization Technology Into a U.S. Navy Shipboard Gas Turbine Engine |
David P. Guimond;Matthew E. Thomas,Roberto DiSalvo |
|
54298 |
| IGTI |
2004 |
Development of the Advanced Cycle Low-Power Gas Turbine Alternator (ACL-GTA) |
R. McCallum,Colin English;Bernard Watier |
|
54302 |
| IGTI |
2004 |
USNS LCPL Roy M. Wheat: Zorya DT-59 Gas Turbine Installation and Integration |
Richard DeCorso;Daniel E. Caguiat,Jeffrey S. Patterson,David M. Zipkin |
|
54306 |
| IGTI |
2004 |
Installation and Planned Testing of the 625 kW Molten Carbonate Ship Service Fuel Cell |
Anthony Nickens;Donald Hoffman,Mark Cervi,Edward House |
|
54307 |
| IGTI |
2004 |
Large-Scale Tests of Pyrotechnically Generated Aerosol Fire Extinguishing Systems for the Protection of Machinery Spaces and Gas Turbine Enclosures in Royal Naval Warships |
Martin Connell;James L. D. Glockling;Fiona Neads |
|
54312 |
| IGTI |
2004 |
A Microturbine Operating With Variable Heat Output |
O. Ibrahim,P. Zimmermann,C. Hirsch,T. Sattelmayer;B. Gerhard;C. Steinbach |
|
53011 |
| IGTI |
2004 |
A Novel Centrifugal Flow Gas Turbine Design |
Klaus Brun,Robert J. McKee,Anthony J. Smalley,Justin R. Hollingsworth,Ryan S. Gernentz |
|
53063 |
| IGTI |
2004 |
Permanent Magnet High Speed Stater/Generator System Development Directly Coupled to Gas Turbine Engine for Mobile Auxiliary Power Unit |
H. S. Yang;M. S. Rho,H. Y. Park,J. H. Choi,Y. B. Cha,J. H. Kwon,C. H. Yang,J. B. Hwang |
|
53165 |
| IGTI |
2004 |
Steady State and Transient Modeling of a Micro-Turbine With Comparison to Operating Engine |
Craig R. Davison,A. M. Birk |
|
53378 |
| IGTI |
2004 |
Performance Testing of a Microturbine Generator Set With Twin Rotating Disk Regenerators |
Hsiao-Wei D. Chiang,Chun-Hao Wang,Chih-Neng Hsu |
|
53467 |
| IGTI |
2004 |
Micro Gas Turbine With Ceramic Rotor |
Hiro Yoshida,Takayuki Matsunuma,Norihiko Iki,Yoshio Akimune;Hiroshi Hoya |
|
53493 |
| IGTI |
2004 |
Micro Turbocharger on a Single Silicon Rotor |
P. Kang,S. Tanaka,M. Esashi |
|
53565 |
| IGTI |
2004 |
Stainless Steels With Improved Oxidation Resistance for Recuperators |
Bruce A. Pint,Karren L. More |
|
53627 |
| IGTI |
2004 |
Testing of a Small Turbocharger/Turbojet Sized Simulator Rotor Supported on Foil Bearings |
James F. Walton II,Hooshang Heshmat,Michael J. Tomaszewski |
|
53647 |
| IGTI |
2004 |
Improving Turbine Performance by Use of CFD |
Giorgos Sieros,Michail Kefalakis,Kyriacos D. Papailiou |
|
53737 |
| IGTI |
2004 |
Operation of a Mesoscopic Gas Turbine Simulator at Speeds in Excess of 700,000 rpm on Foil Bearings |
Mohsen Salehi,Hooshang Heshmat,James F. Walton II,Michael Tomaszewski |
|
53870 |
| IGTI |
2004 |
Aerothermodynamics of Micro-Turbomachinery |
Y. Gong,B. T. Sirakov,A. H. Epstein,C. S. Tan |
|
53877 |
| IGTI |
2004 |
The Use and Performance of Oxidation and Creep-Resistant Stainless Steels in an Exhaust Gas Primary Surface Recuperator Application |
James M. Rakowski,Charles P. Stinner;Mark Lipschutz,J. Preston Montague |
|
53917 |
| IGTI |
2004 |
Cheope: A Tool for the Optimal Design of Compact Recuperators |
Alberto Traverso,Federico Zanzarsi,Aristide Massardo |
|
54114 |
| IGTI |
2004 |
Design of Ceramic Components for an Advanced Micro-Turbine Engine |
Bill Tredway,Jun Shi,John Holowczak,Venkata Vedula,Connie E. Bird,S. Scott Ochs,Luca Bertuccioli,David J. Bombara,Kevin E. Green |
|
54205 |
| IGTI |
2004 |
Austenitic Stainless Steels and Alloys With Improving High-Temperature Performance for Advanced Microturbine Recuperators |
Philip J. Maziasz,Bruce A. Pint,John P. Shingledecker,Karren L. More,Neal D. Evans,Edgar Lara-Curzio |
|
54239 |
| IGTI |
2004 |
Screening and Evaluation of Materials for Microturbine Recuperators |
Edgar Lara-Curzio,R. Trejo,K. L. More,P. A. Maziasz,B. A. Pint |
|
54254 |
| IGTI |
2004 |
A Novel Gas Turbine Product Line for Onsite Generation and Combined Heat and Power Between 400 kWe and 1.6 MWe |
George L. Touchton,Alexandr Belokon;Mikhail Senkevich,V. Belyaev |
|
54257 |
| IGTI |
2004 |
Development of an Advanced Microtubine System Using Humid Air Turbine Cycle |
Satoshi Dodo,Susumu Nakano,Tomoaki Inoue,Masaya Ichinose,Manabu Yagi,Kuniyoshi Tsubouchi,Kazuyuki Yamaguchi,Yasushi Hayasaka |
|
54337 |
| IGTI |
2004 |
Surge Avoidance in Gas Compression Systems |
R. Kurz,R. C. White |
|
53066 |
| IGTI |
2004 |
All-Electric Actuator for Mid-Size Gas Turbines |
Terry L. Fredlund;Joe Mares |
|
53082 |
| IGTI |
2004 |
Dynamic Characteristics of the Diverging Taper Honeycomb-Stator Seal |
Anthony J. Smalley;Massimo Camatti;Dara W. Childs;Justin Hollingsworth;Giuseppe Vannini;Jeremy J. Carter |
|
53084 |
| IGTI |
2004 |
Detecting and Evaluating Deterioration in Compression Equipment by Monitoring Deviations From Expected Performance |
Robert J. McKee,Anthony J. Smalley,Gary D. Bourn;Kenneth N. Young;Martin B. Treuhaft |
|
53085 |
| IGTI |
2004 |
Salt in the Marine Environment and the Creation of a Standard Input for Gas Turbine Air Intake Filtration Systems |
Peter T. McGuigan |
|
53113 |
| IGTI |
2004 |
Vent Gas Collection From Gas Compressor Dry Gas Seals |
Ari Suomilammi |
|
53154 |
| IGTI |
2004 |
Failures of High Energy, High Pitch Velocity Gear Boxes |
Steve Ingistov |
|
53262 |
| IGTI |
2004 |
Tuning Your Fuel Gas Delivery System |
T. D. Newbound,K. S. Al-Showiman |
|
53298 |
| IGTI |
2004 |
Development and Experimental Validation of a Compressor Dynamic Model |
M. Venturini |
|
53416 |
| IGTI |
2004 |
Compressor Transient Behaviour |
Gisle B. Tveit,Lars E. Bakken;Tor Bjorge |
|
53700 |
| IGTI |
2004 |
Measured Data Correction for Improved Fouling and Degradation Analysis of Offshore Gas Turbines |
Timot Veer;Klaus K. Haglerod;Olav Bolland |
|
53760 |
| IGTI |
2004 |
Three-Dimensional Finite Element Analysis of Dovetail Attachments With and Without Crowning |
J. R. Beisheim;G. B. Sinclair |
|
53222 |
| IGTI |
2004 |
Thermomechanical Design of a Heat Exchanger for a Recuperative Aero Engine |
Harald Schonenborn,Ernst Ebert,Burkhard Simon,Paul Storm |
|
53696 |
| IGTI |
2004 |
Subsurface Stress Fields in FCC Single Crystal Anisotropic Contacts |
Nagaraj K. Arakere,Erik C. Knudsen;Gregory R. Swanson;Gregory Duke;Gilda Ham-Battista |
|
53913 |
| IGTI |
2004 |
Investigation of Three-Dimensional Stress Fields and Slip Systems for FCC Single Crystal Superalloy Notched Specimens |
Nagaraj K. Arakere,Shadab Siddiqui;Shannon Magnan;Fereshteh Ebrahimi,Luis E. Forero |
|
53938 |
| IGTI |
2004 |
Melt Infiltrated SiC Composites for Gas Turbine Engine Applications |
Gregory N. Morscher;Vijay V. Pujar |
|
53196 |
| IGTI |
2004 |
Innovative Manufacturing Process of MGC Components for Ultra-High Efficiency Gas Turbine Systems |
Yoshiharu Waku;Narihito Nakagawa;Kenji Kobayashi;Yasuhiro Kinoshita;Shinya Yokoi |
|
53266 |
| IGTI |
2004 |
High Temperature Stability of MGCs Gas Turbine Components in Air and Combustion Gas Flow Environments |
Narihito Nakagawa,Hideki Ohtsubo,Kohji Shibata,Atsuyuki Mitani,Kazutoshi Shimizu;Yoshiharu Waku |
|
53573 |
| IGTI |
2004 |
Evaluating the Stability of BSAS-Based EBCs in High Water-Vapor Pressure Environments |
Karren L. More,Peter F. Tortorelli;Tania Bhatia,G. D. Linsey |
|
53863 |
| IGTI |
2004 |
Foreign Object Damage Behavior of a SiC/SiC Composite at Ambient and Elevated Temperatures |
Sung R. Choi,Ramakrishna T. Bhatt,J. Michael Pereira,John P. Gyekenyesi |
|
53910 |
| IGTI |
2004 |
Ceramic Matrix Composite Vane Subelement Testing in a Gas Turbine Environment |
Michael Verrilli,Anthony Calomino;R. Craig Robinson;David J. Thomas |
|
53970 |
| IGTI |
2004 |
Ceramic Matrix Composite Vane Subelement Fabrication |
Anthony Calomino,M. Verrilli |
|
53974 |
| IGTI |
2004 |
Engine Test and Post Engine Test Characterization of Self-Sealing Ceramic Matrix Composites for Nozzle Applications in Gas Turbine Engines |
Eric P. Bouillon,Patrick C. Spriet,Georges Habarou,Caroline Louchet;Thibault Arnold;Greg C. Ojard,David T. Feindel,Charles P. Logan,Kimberly Rogers,Doug P. Stetson |
|
53976 |
| IGTI |
2004 |
Cumulative Damage Mechanics: Characterization, Modeling, and Interpretation of Progressive Failure in Ceramics and Composites |
Michael G. Jenkins;Paul E. Labossiere;Jonathan A. Salem |
|
54013 |
| IGTI |
2004 |
Advances in Thermal Barrier and Abradable Ceramic Coatings by Chemically Bonded Composite Sol-Gel Technology |
Junlong Fu,Quanzu Yang,Tom Troczynski |
|
54051 |
| IGTI |
2004 |
Development and Evaluation of Environmental Barrier Coatings for Si-Based Ceramics |
Tania Bhatia,Venkat Vedula,Harry Eaton,Ellen Sun,John Holowczak,Gary Linsey |
|
54092 |
| IGTI |
2004 |
Development of Express Calculation-Experimental Technique to Estimate Life and Reliability of Ceramic Parts and Components |
A. V. Soudarev,A. S. Molchanov |
|
54188 |
| IGTI |
2004 |
In-Situ Monitoring of Damage in SiC/SiC Composites Using Acousto-Ultrasonics |
Andrew L. Gyekenyesi,Gregory N. Morscher;Laura M. Cosgriff |
|
54233 |
| IGTI |
2004 |
Advanced Materials for Gas Turbine Combustion Systems: Program Summary |
Jeffrey Price |
|
54250 |
| IGTI |
2004 |
Exposure Test Results of Lu2Si2O7 in Combustion Gas Flow at High Temperature and High Speed |
Isao Yuri,Tohru Hisamatsu;Shunkichi Ueno,Tatsuki Ohji |
|
54277 |
| IGTI |
2004 |
Finite Element Model Updating in the Vibration of Bladed Disk: Shaft Assemblies |
B. Irwanto,Rolf Schmidt,D. Pawandenat,H.-J. Hardtke |
|
53041 |
| IGTI |
2004 |
Measurement of Air Film Damping Effectiveness |
R. M. Mathison,M. G. Dunn;M. M. Weaver;A. Dushko |
|
53057 |
| IGTI |
2004 |
Characterization of Turbine Blade Friction Dampers |
K.-H. Koh,J. H. Griffin,S. Filippi,A. Akay |
|
53278 |
| IGTI |
2004 |
Sensitivity of Tuned Bladed Disk Response to Frequency Veering |
J. A. Kenyon;J. H. Griffin,N. E. Kim |
|
53280 |
| IGTI |
2004 |
Systematic Mistuning of Bladed Disk Assemblies With Friction Contacts |
Florian Gotting,Walter Sextro,Lars Panning,Karl Popp |
|
53310 |
| IGTI |
2004 |
Asymmetrical Underplatform Dampers in Gas Turbine Bladings: Theory and Application |
Lars Panning,Karl Popp,Walter Sextro,Florian Gotting;Andreas Kayser,Ivo Wolter |
|
53316 |
| IGTI |
2004 |
Development of an Experimental Capability to Produce Controlled Blade Tip/Shroud Rubs at Engine Speed |
Corso Padova,Jeffrey Barton,Michael G. Dunn;Steve Manwaring,Gamaliel Young;Maurice Adams Jr.;Michael Adams |
|
53322 |
| IGTI |
2004 |
Efficient Fracture Design for Complex Turbine Engine Components |
R. Craig McClung,Michael P. Enright,Yi-Der Lee,Luc J. Huyse;Simeon H. K. Fitch |
|
53323 |
| IGTI |
2004 |
Combined Fatigue Life Test and Extrapolation of Turbine Disc Mortise at Elevated Temperature |
Rongqiao Wang;Chongdu Cho;Jingxu Nie |
|
53331 |
| IGTI |
2004 |
Blade Manufacturing Tolerances Definition for a Mistuned Industrial Bladed Disk |
Evangeline Capiez-Lernout,Christian Soize;Jean-Pierre Lombard,Christian Dupont,Eric Seinturier |
|
53356 |
| IGTI |
2004 |
Forced Response Prediction: Methodology for the Design of HP Compressor Bladed Disks |
Eric Seinturier;Jean-Pierre Lombard;Michel Dumas,Christian Dupont,Virendra Sharma,Jerome Dupeux |
|
53372 |
| IGTI |
2004 |
Probabilistic Lifetime Analysis for Turbine Blades Based on a Combined Direct Monte Carlo and Response Surface Approach |
Matthias Voigt;Roland Mucke;Konrad Vogeler;Michael Oevermann |
|
53439 |
| IGTI |
2004 |
Forced Response of Shrouded Bladed Disc Assemblies: A Jointed Experimental Numerical Approach |
F. D'Ambrosio,E. Chatelet,J. Ravoux,G. Jacquet-Richardet |
|
53705 |
| IGTI |
2004 |
Investigation of Blade and Disc Vibrations on the Upgraded Power Turbine for the THM 1304 Gas Turbine |
D. Frank,A. Kleinefeldt,U. Orth;W. Cline |
|
53802 |
| IGTI |
2004 |
Development of an Improved High Cycle Fatigue Criterion |
Onome Scott-Emuakor,M.-H. Herman Shen;Charles Cross,Jeffrey Calcaterra,Tommy George |
|
53851 |
| IGTI |
2004 |
A Method of the Dynamic Analysis of Pipeline Systems Considering the Effects of Casing |
Lin Li,Jun Sheng |
|
53859 |
| IGTI |
2004 |
Intentional Mistuning Design Space Reduction Based on Vibration Energy Flow in Bladed Disks |
Sang-Ho Lim,Matthew P. Castanier,Christophe Pierre |
|
53873 |
| IGTI |
2004 |
Method for Analysis of Nonlinear Multiharmonic Vibrations of Mistuned Bladed Discs With Scatter of Contact Interface Characteristics |
E. P. Petrov,D. J. Ewins |
|
53891 |
| IGTI |
2004 |
Method for Direct Parametric Analysis of Nonlinear Forced Response of Bladed Discs With Friction Contact Interfaces |
E. P. Petrov |
|
53894 |
| IGTI |
2004 |
Probabilistic Analysis of Geometric Uncertainty Effects on Blade-Alone Forced Response |
Jeffrey M. Brown;Ramana V. Grandhi |
|
53959 |
| IGTI |
2004 |
Reduced Models for Rotating Component Lifing |
Girija Parthasarathy,Satyavaraprasad Allumallu |
|
53993 |
| IGTI |
2004 |
Maximum Amplification of Blade Response Due to Mistuning in Multi-Degree-of-Freedom Blade Models |
Bing Xiao,Alejandro J. Rivas-Guerra,Marc P. Mignolet |
|
54030 |
| IGTI |
2004 |
Uncertainty Evaluation for Structural Damage Parameters Prediction Methodology |
Eva L. Suarez,Brice Cassenti,Richard Holmes;William Scheuren |
|
54154 |
| IGTI |
2004 |
Natural Frequencies and Modes Shapes of Two Mistuned Bladed Discs on the Shaft |
Romuald Rzadkowski,Marcin Drewczynski |
|
54265 |
| IGTI |
2004 |
Periodic Unsteadiness of Compressor Tip Clearance Vortex |
Jinwoo Bae;Kenneth S. Breuer;Choon S. Tan |
|
53015 |
| IGTI |
2004 |
Study on the Effect of Asymmetric Vane Spacing on Vibratory Stress of Blade |
Y. Kaneko,K. Mori,Hidetaka Okui |
|
53023 |
| IGTI |
2004 |
Numerical Study of a Cascade Unsteady Separation Flow |
Zongjun Hu,GeCheng Zha;J. Lepicovsky |
|
53195 |
| IGTI |
2004 |
Shock Induced Flutter of Turbomachinery Blade Rows |
R. Srivastava,Theo G. Keith Jr. |
|
53479 |
| IGTI |
2004 |
Rotor Wake Variability in a Transonic Compressor Stage |
Nicole L. Key;Patrick B. Lawless;Sanford Fleeter |
|
53486 |
| IGTI |
2004 |
Non-Synchronous Vibration (NSV) Due to a Flow-Induced Aerodynamic Instability in a Composite Fan Stator |
A. J. Sanders |
|
53492 |
| IGTI |
2004 |
Aerodynamic and Mechanical Vibration Analysis of a Compressor Blisk at Surge |
Harald Schonenborn,Thomas Breuer |
|
53579 |
| IGTI |
2004 |
Experimental Reduction of Transonic Fan Forced Response by IGV Flow Control |
S. Todd Bailie,Wing F. Ng;William W. Copenhaver |
|
53975 |
| IGTI |
2004 |
A Numerical Method for 3D Turbomachinery Aeroelasticity |
Paola Cinnella;Emanuele Cappiello,Pietro De Palma,Michele Napolitano,Giuseppe Pascazio |
|
54060 |
| IGTI |
2004 |
Linear Stability Analysis of LPT Rotor Packets: Part I -- Methodology and Two-Dimensional Results |
Roque Corral;Carlos Lopez;Carlos Vasco |
|
54119 |
| IGTI |
2004 |
Linear Stability Analysis of LPT Rotor Packets: Part II -- Three-Dimensional Results and Mistuning Effects |
Roque Corral,Juan Manuel Gallardo,Carlos Vasco |
|
54120 |
| IGTI |
2004 |
Flutter of Mistuned Bladed Disks and Blisks With Aerodynamic and FMM Structural Coupling |
Robert E. Kielb;Drew M. Feiner,Jerry H. Griffin;Tomokazu Miyakoazawa |
|
54315 |
| IGTI |
2004 |
Whirl Frequency Dependent Alford Forces in Axial Compressors |
Claus M. Myllerup,Graeme Keith |
|
53096 |
| IGTI |
2004 |
A Neural Network-Based Closed Loop Identification of a Magnetic Bearings System |
Jose Medina,Monica Parada,Victor Guzman,Luis Medina,Sergio Diaz |
|
53103 |
| IGTI |
2004 |
High Speed, High Temperature, Fault Tolerant Operation of a Combination Magnetic-Hydrostatic Bearing Rotor Support System for Turbomachinery |
Mark Jansen;Gerald Montague;Andrew Provenza;Alan Palazzolo |
|
53321 |
| IGTI |
2004 |
Rotordynamic Coefficients for a Teeth-on-Stator Labyrinth Seal at 70 Bar Supply Pressure -- Measurements Versus Theory and Comparisons to a Hole-Pattern Stator Seal |
Arthur Picardo;Dara W. Childs,Leland T. Jordan |
|
53327 |
| IGTI |
2004 |
A Study of the Effects of Inlet Preswirl on the Dynamic Coefficients of a Straight-Bore Honeycomb Gas Damper Seal |
Brandon B. Sprowl;Dara W. Childs |
|
53328 |
| IGTI |
2004 |
Dynamics of a Spinning Hollow Rayleigh Beam in General Boundary Conditions |
Geeng-Jen Sheu |
|
53402 |
| IGTI |
2004 |
Squeeze-Film Damper Predictions for Simulation of Aircraft Engine Rotordynamics |
Cyril Defaye,Franck Laurant;Philippe Carpentier;Mihai Arghir,Olivier Bonneau;Samuel Colboc |
|
53447 |
| IGTI |
2004 |
A Study of Active Rotor-Blade Vibration Control Using Electro-Magnetic Actuation: Part 1 -- Theory |
Rene H. Christensen,Ilmar F. Santos |
|
53509 |
| IGTI |
2004 |
A Study of Active Rotor-Blade Vibration Control Using Electro-Magnetic Actuation: Part 2 -- Experiments |
Rene H. Christensen,Ilmar F. Santos |
|
53512 |
| IGTI |
2004 |
Bump-Type Foil Bearing Structural Stiffness: Experiments and Predictions |
Dario Rubio,Luis San Andres |
|
53611 |
| IGTI |
2004 |
Analysis of Performance and Rotordynamic Force Coefficients of Brush Seals With Reverse Rotation Ability |
Adolfo Delgado,Luis San Andres;John F. Justak |
|
53614 |
| IGTI |
2004 |
Rotordynamic Performance of Flexure Pivot Hydrostatic Gas Bearings for Oil-Free Turbomachinery |
Xuehua Zhu,Luis San Andres |
|
53621 |
| IGTI |
2004 |
Some Experiments on Oil Whirl and Oil Whip |
A. El-Shafei,S. H. Tawfick,M. S. Raafat,G. M. Aziz |
|
53644 |
| IGTI |
2004 |
A New Method of Calculating Transient Response of Complex Rotors |
Lin Li,Bao Feng Wang |
|
53812 |
| IGTI |
2004 |
Contact Dynamic Response With Misalignment in a Flexible Rotor/Magnetic Bearing System |
Patrick S. Keogh;Matthew O. W. Cole |
|
53818 |
| IGTI |
2004 |
Advancements in the Structural Stiffness and Damping of a Large Compliant Foil Journal Bearing: An Experimental Study |
Mohsen Salehi,Hooshang Heshmat,James F. Walton II |
|
53860 |
| IGTI |
2004 |
Frequency Response Analysis of an Actively Lubricated Rotor/Tilting-Pad Bearing System |
Rodrigo Nicoletti;Ilmar Ferreira Santos |
|
54034 |
| IGTI |
2004 |
Optimization Combines the Genetic Algorithms With Augmented Lagrange Multiplier Method for Rotor-Bearing Systems Under Dynamic Behavior Constraints |
T. N. Shiau,C. H. Kang,D. S. Liu |
|
54058 |
| IGTI |
2004 |
Multilevel Optimization of the Geared Rotor-Bearing System for Multi-Objectives With Critical Speed Constraints |
T. N. Shiau;J. R. Chang;W. B. Lu |
|
54066 |
| IGTI |
2004 |
Coupled Lateral and Torsional Vibrations of a Cracked Rotor |
Jerzy T. Sawicki;George Y. Baaklini,Andrew L. Gyekenyesi |
|
54095 |
| IGTI |
2004 |
Experimental Lift Off Characteristics and the Effect of a Low Friction Coating on the Startup Response of Simple Gas Hybrid Bearings for Oil-Free Turbomachinery |
Deborah A. Wilde;Luis San Andres;Julene Aguirrezabala |
|
54183 |
| IGTI |
2004 |
Optimization of Rotor Critical Speeds by Change of Features of Machine's Bearings |
Jozef Rybczynski |
|
54291 |
| IGTI |
2004 |
Recent Developments in Turbomachinery Modelling for Improved Balancing and Vibration Response Analysis |
Peter Y. P. Chen,Ningsheng Feng,Eric J. Hahn,Wenlong Hu |
|
54305 |
| IGTI |
2004 |
Modelling a New Three-Pad Active Bearing |
Janusz M. Krodkiewski,Gregory J. Davies |
|
54322 |
| IGTI |
2004 |
Impact of Gas Turbine Outflow on Diffuser Performance: A Numerical Study |
David Kluss;Alexander Wiedermann;Werner Volgmann |
|
53043 |
| IGTI |
2004 |
The Unsteady Development of a Turbulent Wake Through a Downstream Low-Pressure Turbine Blade Passage |
R. D. Stieger,H. P. Hodson |
|
53061 |
| IGTI |
2004 |
A Low Speed Axial Compressor With a Cascade of Magnus Rotors to Replace the Aerofoils of the Stator |
M. G. Rose |
|
53218 |
| IGTI |
2004 |
Shop Testing of the W501FD Gas Turbine at the Berlin Test Facility |
Selvam Veerappan,Abdullatif Chehab,Phillip Gravett,Robert Bland;Christof Lechner |
|
53238 |
| IGTI |
2004 |
Surface Roughness Effects on Turbine Blade Aerodynamics |
Frank Hummel,Michael Loetzerich;Pasquale Cardamone,Leonhard Fottner |
|
53314 |
| IGTI |
2004 |
Performance of a Longitudinal Circular-to-Slot Gas Turbine Exhaust Duct With a 90 Degree Bend |
S. Bottenheim,A. M. Birk,D. J. Poirier |
|
53373 |
| IGTI |
2004 |
Probabilistic System Reliability for a Turbine Engine Airfoil |
Brian K. Beachkofski;Ramana V. Grandhi |
|
53381 |
| IGTI |
2004 |
Experimental and Computational Evaluation of an Ejector System Utilizing a Primary S-Bend Transition Duct |
J. C. Mateer,A. M. Birk,D. Poirier |
|
53474 |
| IGTI |
2004 |
On the Aerodynamic Design of Compressor Airfoils for Robustness Under Geometric Uncertainty |
Victor E. Garzon,David L. Darmofal |
|
53581 |
| IGTI |
2004 |
Performance-Based Geometric Tolerancing of Compressor Blades |
Caroline Twomey Lamb,David L. Darmofal |
|
53592 |
| IGTI |
2004 |
Customized Profiles -- The Beginning of an Era: A Short History of Blade Design |
Hanns-Juergen Lichtfuss |
|
53742 |
| IGTI |
2004 |
Design of Small Centrifugal Compressors Performance Test Facility |
Fahad A. Al-Sulaiman,Amro M. Al-Qutub |
|
53821 |
| IGTI |
2004 |
Unsteady Load of Partial Admission Control Stage Rotor of a Large Power Steam Turbine |
Piotr Lampart,Mariusz Szymaniak,Romuald Rzadkowski |
|
53886 |
| IGTI |
2004 |
Experimental Study of the Effect of Periodic Unsteady Wake Flow on Boundary Layer Development, Separation, and Re-Attachment Along the Surface of a Low Pressure Turbine Blade |
M. T. Schobeiri,B. Ozturk |
|
53929 |
| IGTI |
2004 |
A Selective Assembly Method to Reduce the Impact of Blade Flow Variability on Turbine Life |
Vince Sidwell,David Darmofal |
|
53930 |
| IGTI |
2004 |
Aero-Thermodynamic Aspects of Film Cooling in Regions of Separated Flow on the Pressure Side of a High-Lift HPT Blade |
Lars Homeier;Ewald Lutum;Erik Janke,Frank Haselbach |
|
54067 |
| IGTI |
2004 |
Monitoring the Approach to the Surge Line of a 4-Stage Transonic Compressor Based on Cepstral-Analysis |
Frank O. Methling,Jens Kuss |
|
54072 |
| IGTI |
2004 |
Design and Test of an Ultra-Low Solidity Flow-Controlled Compressor Stator |
K. R. Kirtley,P. Graziosi;P. Wood;B. Beacher;H.-W. Shin |
|
53012 |
| IGTI |
2004 |
Stator Diffusion Enhancement Using a Re-Circulating Co-Flowing Steady Jet |
David Car,Nicholas J. Kuprowicz;Jordi Estevadeordal;Gecheng Zha;William Copenhaver |
|
53086 |
| IGTI |
2004 |
Investigation on a Type of Flow Control to Weaken Unsteady Separated Flow by Unsteady Excitation in Axial Flow Compressors |
Xin-Qian Zheng,Xiao-Bo Zhou,Zhou Sheng |
|
53167 |
| IGTI |
2004 |
The Experiment Research on the Performance of Low Speed Axial-Compressor by External Acoustic Excitation |
Zhi-Ping Li,Zhi-Qiang Gong,Yan Liu,Ya-Jun Lu |
|
53183 |
| IGTI |
2004 |
Compressible Flow in Inlet Guide Vanes With Mechanical Flaps |
M. Boehle,M. Cagna,Lutz Itter |
|
53191 |
| IGTI |
2004 |
Plasma Actuator for Wake Flow Control of High Camber Blades During Part Load Operation |
Van Dyken Robert;Horacio Perez-Blanco;Aaron Byerley,Tom McLaughlin |
|
53227 |
| IGTI |
2004 |
Flow Analysis on a Single-Stage Axial Compressor With a Splitter Rotor |
Haipeng Li,Zhengping Zou,Huoxing Liu |
|
53265 |
| IGTI |
2004 |
Early Stall Warning Technique for Axial Flow Compressors |
Nobuyuki Tahara,Masahiro Kurosaki;Yutaka Ohta,Eisuke Outa;Tomofumi Nakakita;Yuki Tsurumi |
|
53292 |
| IGTI |
2004 |
Effect of Tip Clearance on Stall Evolution Process in a Low-Speed Axial Compressor Stage |
Masahiro Inoue,Motoo Kuroumaru,Shinichi Yoshida;Takahiro Minami;Kazutoyo Yamada;Masato Furukawa |
|
53354 |
| IGTI |
2004 |
Parametric Study of Tip Clearance: Casing Treatment on Performance and Stability of a Transonic Axial Compressor |
Behnam H. Beheshti;Joao A. Teixeira,Paul C. Ivey;Kaveh Ghorbanian,Bijan Farhanieh |
|
53390 |
| IGTI |
2004 |
The Aerodynamic Interaction of Tip Leakage and Mainstream Flows in a Fully-Ducted Axial Fan |
Alessandro Corsini,Franco Rispoli;Geoff Sheard,Iain Kinghorn |
|
53408 |
| IGTI |
2004 |
Studies on Endwall Treatment for the Generation of High Incidence Flow and Its Influence on Flow Structures in an Annular Compressor Cascade |
Jorg Weidenfeller,Martin Lawerenz |
|
53413 |
| IGTI |
2004 |
Endwall Boundary Layer Control in Compressor Cascades |
Ralf Muller,Konrad Vogeler,Helmut Sauer;Martin Hoeger |
|
53433 |
| IGTI |
2004 |
Axial Fan at Reversal Flow |
Vaclav Cyrus |
|
53446 |
| IGTI |
2004 |
Influence of Blade Sweep on the Energetic Behavior of Axial Flow Turbomachinery Rotors at Design Flow Rate |
Janos Vad,Ali R. A. Kwedikha;Helmut Jaberg |
|
53544 |
| IGTI |
2004 |
Three-Dimensional Separations in Axial Compressors |
Semiu A. Gbadebo;Nicholas A. Cumpsty;Tom P. Hynes |
|
53617 |
| IGTI |
2004 |
Influence of Surface Roughness on Three-Dimensional Separation in Axial Compressors |
Semiu A. Gbadebo,Tom P. Hynes;Nicholas A. Cumpsty |
|
53619 |
| IGTI |
2004 |
Improving Stall Margin by Using an Air-Separator for a Variable-Pitch Axial-Flow Fan |
Takahiro Nishioka;Shuuji Kuroda,Tadashi Kozu |
|
53663 |
| IGTI |
2004 |
Experimental Investigation of a High Pressure Ratio Aspirated Fan Stage |
Ali Merchant,Jack L. Kerrebrock;John J. Adamczyk,Edward Braunsheidel |
|
53679 |
| IGTI |
2004 |
Evolution of the Tip Leakage Vortex in an Axial Compressor Rotor |
Baojie Liu,Xianjun Yu,Hongwei Wang,Huoxing Liu,Haokang Jiang,Maozhang Chen |
|
53703 |
| IGTI |
2004 |
Unsteady Three-Dimensional Flow Phenomena Due to Breakdown of Tip Leakage Vortex in a Transonic Axial Compressor Rotor |
K. Yamada;M. Furukawa;T. Nakano;M. Inoue;K. Funazaki |
|
53745 |
| IGTI |
2004 |
Boundary Layer Suction via a Slot in a Transonic Compressor: Numerical Parameter Study and First Experiments |
K. Hubrich,A. Bolcs,P. Ott |
|
53758 |
| IGTI |
2004 |
Analysis of Local Flow Structure and Global Compressor Performance During Rotating Stall |
Chiara Palomba |
|
53816 |
| IGTI |
2004 |
Role of Tip-Leakage Vortices and Passage Shock in Stall Inception in a Swept Transoninc Compressor Rotor |
Chunill Hah;Douglas C. Rabe;Aspi R. Wadia |
|
53867 |
| IGTI |
2004 |
Flow Mechanism for Stall Margin Improvement Due to Circumferential Casing Grooves on Axial Compressors |
Aamir Shabbir,John J. Adamczyk |
|
53903 |
| IGTI |
2004 |
A Transonic Compressor Stage: Part 1 -- Experimental Results |
A. J. Gannon,G. V. Hobson,R. P. Shreeve |
|
53923 |
| IGTI |
2004 |
A Transonic Compressor Stage: Part 2 -- CFD Simulation |
G. V. Hobson,A. J. Gannon,R. P. Shreeve |
|
53927 |
| IGTI |
2004 |
Aerodynamic Design and Test Result Analysis of a Three Stage Research Compressor |
Armel Touyeras,Michel Villain |
|
53940 |
| IGTI |
2004 |
A CFD Investigation of IGV Flow Vectoring by Counter Flow Blowing |
Michael R. Harff,J. Mitch Wolff;William W. Copenhaver |
|
53941 |
| IGTI |
2004 |
Aerodynamic-Aeroacoustic Investigation of Rotating Stall in Conventional and Skewed Rotors |
N. Cai,A. Benaissa,W. D. Allan |
|
53958 |
| IGTI |
2004 |
Calculation of the Mixed-Out State in Turbomachine Flows |
Anil Prasad |
|
54021 |
| IGTI |
2004 |
Effects of Bleed Rate and Endwall Location on the Aerodynamic Behaviour of a Circular Hole Bleed Off-Take |
B. A. Leishman,N. A. Cumpsty;J. D. Denton |
|
54197 |
| IGTI |
2004 |
Application of Multistage CFD Analysis to Low Pressure Compressor Design |
Lisa Brilliant,Stanley Balamucki;George Burger;Yuan Dong,Charlie Lejambre |
|
54263 |
| IGTI |
2004 |
Compressor Stall Control Through Endwall Recirculation |
Anthony J. Strazisar,Michelle M. Bright,Scott Thorp,Dennis E. Culley,Kenneth L. Suder |
|
54295 |
| IGTI |
2004 |
Effects of Inlet Ramp Surfaces on the Aerodynamic Behaviour of Bleed Hole and Bleed Slot Off-Take Configurations |
B. A. Leishman,N. A. Cumpsty;J. D. Denton |
|
54331 |
| IGTI |
2004 |
Experimental and Numerical Investigation Into the Unsteady Interaction of Labyrinth Seal Leakage Flow and Main Flow in a 1.5-Stage Axial Turbine |
A. Giboni;K. Wolter,J. R. Menter,H. Pfost |
|
53024 |
| IGTI |
2004 |
Axial Turbine Tip-Leakage Losses at Off-Design Incidences |
H. Haselbacher,R. Willinger |
|
53039 |
| IGTI |
2004 |
The Combined Effects of Surface Trips and Unsteady Wakes on the Boundary Layer Development of an Ultra-High-Lift LP Turbine Blade |
Xue Feng,Howard Hodson |
|
53081 |
| IGTI |
2004 |
Experimental and Numerical Investigation on the Performance of a Family of Three HP Transonic Turbine Blades |
D. Corriveau;S. A. Sjolander |
|
53087 |
| IGTI |
2004 |
Performance Degradation Due to Blade Surface Roughness in a Single-Stage Axial Turbine |
Yong Il Yun,Il Young Park,Seung Jin Song |
|
53094 |
| IGTI |
2004 |
Effect of 3D Vane Shape on the Flow Capacity |
I. V. Afanasiev,A. V. Granovski,A. M. Kareline,M. K. Kostege |
|
53095 |
| IGTI |
2004 |
Influence of the Fillet Between Blade and Casing on the Aerodynamic Performance of a Transonic Turbine Vane |
P. Pieringer,W. Sanz |
|
53119 |
| IGTI |
2004 |
Interaction Between Wake and Film Cooling Jets: Numerical Analysis |
P. Adami,F. Montomoli,E. Belardini,F. Martelli |
|
53178 |
| IGTI |
2004 |
Linear and Non-Linear Simulations of the Wake-Bubble Interaction and the Generated Surface Pressure Fluctuations on High Lift Turbine Profiles |
Antonio Antoranz,Pedro de la Calzada |
|