Search form for published papers in conferences related to rotordynamics.

Provided by Rotating Machinery Analysis, Inc.

Return to www.rotordynamics.org

List of conferences in the data base.

Enter search criteria
Conferences
Paper Title:
Paper Author:
From year:
To year:
Records per page:
Items found: 268 
After performing a search, to obtain a hardcopy of an article or entire proceeding try clicking on the link in the first column, which shows the name of the conference sponsor.
Papers
Conference Year Paper Title Paper Author Page Number Other
IGTI  2006  The Development of Data Match Acceptance Criteria for the Validation of a Thermal Model  U. Ruedel and J. R. Turner  GT2006-90028   
IGTI  2006  Derivation of Diagnostic Requirements for a Distributed UAV Turbofan Engine Control System  Olof Hannius, Dan Ring, and Johan Karlsson  GT2006-90094*   
IGTI  2006  A Simple Mathematical Approach to Data Reconciliation in a Single-Shaft Combined-Cycle System  S. Can Gulen and Raub W. Smith  GT2006-90145   
IGTI  2006  Acoustics Based Prognostics for DLE Combustor Lean Blowout Detection  Avinash Taware, Minesh Shah, Pingchuan Wu, Yongsheng Yang, Jian Zhou, and Ajai Singh  GT2006-90231   
IGTI  2006  Development of Double Gear Fuel Pump for Heat Managment Improvement  Yasushi Matsunaga, Noriko Morioka, Seiei Masuda, and Masahiro Kurosaki  GT2006-90235*   
IGTI  2006  Adaptive Model Based Control of Aircraft Propulsion Systems: Status and Outlook for Naval Aviation Application  James W. Fuller, Aditya Kumar, and Richard C. Millar  GT2006-90241   
IGTI  2006  Development of an In-Situ Laser Absorption NO/NO Measuring System for Gas Turbine Exhaust Jets2  Y. Zhu, H. Yamada, and S. Hayashi  GT2006-90246   
IGTI  2006  Temperature Measurement of High Speed Rotating Turbine Blades Using a Pyrometer  Tomoki Taniguchi, Koji Sanbonsugi, Yoshihiko Ozaki, and Atsushi Norimoto  GT2006-90247   
IGTI  2006  New Attempt for Diagnostics of the Geometry Deterioration of the Power System Based on Thermal Measurement  Jerzy Gluch and Jerzy A. Krzyzanowski  GT2006-90263   
IGTI  2006  Catalytic Detection of Fuel Leaks in Gas Turbine Units: 2 — Gas Fuels Containing Hydrogen, Carbon Monoxide and Inert  Michel Moličre, Philippe Cozzarin, Sébastien Bouchet, and Philippe Rech  GT2006-90290   
IGTI  2006  Gas Turbine Off-Design Performance Adaptation Using a Genetic Algorithm  E. Lo Gatto, Y. G. Li, and P. Pilidis  GT2006-90299   
IGTI  2006  Applications of Neural Networks to Real-Time Prediction of Metal Temperatures in Gas Turbine Engine Components  Michael Widrich, Alok Sinha, Eva Suarez, and Brice Cassenti  GT2006-90317   
IGTI  2006  Gas Turbine Fault Diagnosis From Fast Response Data Using Probabilistic Methods and Information Fusion  A. Kyriazis, N. Aretakis, and K. Mathioudakis  GT2006-90362   
IGTI  2006  Fault Detection and Identification by Gas Path Analysis Approach in Heavy Duty Gas Turbine  Stefania Della Gatta and Paolo Adami  GT2006-90408   
IGTI  2006  A Way to Deal With Model-Plant Mismatch for a Reliable Diagnosis in Transient Operation  S. Borguet, P. Dewallef, and O. Léonard  GT2006-90412   
IGTI  2006  Laser Vibrometry for Real-Time Combustion Stability Diagnostic  Fabrice Giuliani, Bernard Wagner, Jakob Woisetschlaeger, and Franz Heitmeir  GT2006-90413   
IGTI  2006  Full Authority Digital Engine Controller for Marine Gas Turbine Engine  B. Githanjali, P. Shobha, K. S. Ramprasad, and K. Venkataraju  GT2006-90439   
IGTI  2006  Multipoint Non-Linear Method for Enhanced Component and Sensor Malfunction Diagnosis  Philippos Kamboukos and Konstantinos Mathioudakis  GT2006-90451   
IGTI  2006  Application of Hot-Wire Anemometry in a Blow-Down Turbine Facility  T. Yasa, G. Paniagua, and R. Dénos  GT2006-90457*   
IGTI  2006  Design of Reduced Order State Space Controllers With Adaptive Limiting Functions for Industrial Twin Shaft Gas Turbines  Markus Beukenberg, Michael Brodmann, Hans Weibel, Detlef Müller, and Alexander Schwarzin  GT2006-90496   
IGTI  2006  Portable Optical System for In-Situ Thermal Barrier Assessment of Service Operated Blades  Letizia De Maria, Claudia Rinaldi, Piero Lupetin, and Valter Sergo  GT2006-90551   
IGTI  2006  Performance of Gas Turbine Power Plants Controlled by Multiagent Scheme  Lorenzo Dambrosio, Marco Mastrovito, and Sergio M. Camporeale  GT2006-90590   
IGTI  2006  A Neural Network Based Adaptive Observer for Turbine Engine Parameter Estimation  Praveen Shankar and Rama K. Yedavalli  GT2006-90603   
IGTI  2006  A Prognostic and Diagnostic Approach to Engine Health Management  Ed Hindle, Robert Van Stone, Chris Brogan, John Vandike, Ken Dale, and Nathan Gibson  GT2006-90614   
IGTI  2006  The Use of Probabilistic Reasoning to Improve Least Squares Based Gas Path Diagnostics  C. Romessis, Ph. Kamboukos, and K. Mathioudakis  GT2006-90619*   
IGTI  2006  Mathematical Formulation of Model-Based Methods for Diagnostics and Prognostics  Link C. Jaw and William Wang  GT2006-90655   
IGTI  2006  Real-Time Engine Modelling of a Three Shaft Turbofan Engine: From Sub-Idle to Max Power Rate  Sogkyun Kim, Sean Ellis, and Mark Challener  GT2006-90656   
IGTI  2006  An Overview of Selected Prognostic Technologies With Application to Engine Health Management  Michael J. Roemer, Carl S. Byington, Gregory J. Kacprzynski, and George Vachtsevanos  GT2006-90677   
IGTI  2006  A Feasibility Study of Life-Extending Controls for Aircraft Turbine Engines Using a Generic Air Force Model  Al Behbahani, Eric A. Jordan, and Richard Millar  GT2006-90717   
IGTI  2006  A Generalized Fault Classification for Gas Turbine Diagnostics on Steady States and Transients  Igor Loboda, Sergey Yepifanov, and Yakov Feldshteyn  GT2006-90723   
IGTI  2006  Fleet and Usage Management System (FUMSTM) Technologies for Gas Turbines  Hesham Azzam, Peter Knight, Roger Ellison, Ken Bryant, Jonathan Cook, and Stuart Driver  GT2006-90759   
IGTI  2006  Hybrid Kalman Filter Approach for Aircraft Engine In-Flight Diagnostics: Sensor Fault Detection Case  Takahisa Kobayashi and Donald L. Simon  GT2006-90870   
IGTI  2006  Flame Ionization Distribution and Dynamics Monitoring in a Turbulent Premixed Combustor  B. T. Chorpening, E. D. Huckaby, M. L. Morris, J. D. Thornton, and K. J. Benson  GT2006-90879   
IGTI  2006  IR Structured Emission-Based Speciation, Thermometry, and Tomography of CO and HO in High-Pressure Combustors2  Neil Goldstein, Brian Gregor, Jamine Lee, Stephen K. Kramer, Stuart Kozola, and Kenneth J. Semega  GT2006-90899   
IGTI  2006  Flame-Out Detection for Gas Turbine Engines Based Upon Thermocouple Signal Analysis  D. P. Gardiner, G. Pucher, W. D. Allan, and M. LaViolette  GT2006-91080   
IGTI  2006  Fuel Nozzle Performance Analysis Using Laser Techniques and Combustion Chamber With Optical Access  G. R. Pucher, P. R. Underhill, W. D. Allan, G. Wang, and S. Guy  GT2006-91083   
IGTI  2006  Automated Fault Diagnosis of a Micro Turbine With Comparison to a Neural Network Technique  Craig R. Davison and A. M. Birk  GT2006-91085   
IGTI  2006  Prediction of Time Until Failure for Micro Turbine With Unspecified Faults  Craig R. Davison and A. M. Birk  GT2006-91086   
IGTI  2006  A Unified Metric for Fault Detection and Isolation in Engines  Hans R. DePold, Ravi Rajamani, William H. Morrison, and Krishna R. Pattipati  GT2006-91095   
IGTI  2006  An Assessment Methodology for Data-Driven and Model-Based Techniques for Engine Health Monitoring  Steven W. Butler, Krishna R. Pattipati, Allan Volponi, Jon Hull, Ravi Rajamani, and Jason Siegel  GT2006-91096   
IGTI  2006  A Stochastic Model for a Compressor Stability Measure  Manuj Dhingra, Yedidia Neumeier, J. V. R. Prasad, Andrew Breeze-Stringfellow, Hyoun-Woo Shin, and Peter N. Szucs  GT2006-91182*   
IGTI  2006  Using Diagnostics and Prognostics to Minimize the Cost of Ownership of Gas Turbines  Hans R. DePold and Jason Siegel  GT2006-91183   
IGTI  2006  Active Hierarchical Fuzzy Control for Gas Turbine Altitude Relighting Using Multi-Objective Optimization  Sogkyun Kim, Haydn Thompson, and Peter Fleming  GT2006-91192   
IGTI  2006  Materials and Structures Prognosis for Gas Turbine Engines  Jerrol W. Littles, Jr., Robert J. Morris, Richard Pettit, David M. Harmon, Michael F. Savage, and Sharayu Tulpule  GT2006-91203   
IGTI  2006  Measurement of Flow Pattern Within a Rotating Stall Cell in an Axial Compressor  J. Lepicovsky and E. P. Braunscheidel  GT2006-91209   
IGTI  2006  Fault Diagnosis and Prognosis of Gas Turbine Engines Based on Qualitative Modeling  Kyusung Kim and Dinkar Mylaraswamy  GT2006-91210   
IGTI  2006  Robust Kalman Filter Thrust Estimation in a Turbofan Engine  Mattias Henriksson and Dan Ring  GT2006-91241   
IGTI  2006  Thrust Control for a Turbofan Engine Using Estimation  Dan Ring and Mattias Henriksson  GT2006-91251   
IGTI  2006  Embedded Thin-Film Sensor for Crack Detection and Monitoring in Fracture Critical Turbine Engine Components  S. J. Hudak, Jr., B. R. Lanning, G. M. Light, K. S. Chan, J. A. Moryl, and J. R. Pruitt  GT2006-91260   
IGTI  2006  Robust Control of a Gas Turbine With Variable Power Offtake  Shahid Mahmood, Ian A. Griffin, and Peter J. Fleming  GT2006-91266   
IGTI  2006  Challenges, Issues, and Lessons Learned Implementing Prognostics for Propulsion Systems  Andrew Hess, Peter Frith, and Eva Suarez  GT2006-91279   
IGTI  2006  Eliminating Static Pressure Distortion by a Large Cut Back Tongue Volute  C. Xu and R. S. Amano  GT2006-90001   
IGTI  2006  Prototype Development of a Novel Radial Flow Gas Turbine: Combustor Development  Klaus Brun and Ryan S. Gernentz  GT2006-90020   
IGTI  2006  Additional Engine Testing of an Advanced Alloy for Microturbine Primary Surface Recuperators  Wendy J. Matthews  GT2006-90068   
IGTI  2006  Design and Performance of a High-Temperature Regenerator Having Very High Effectiveness, Low Leakage and Negligible Seal Wear  David Gordon Wilson and Jon M. Ballou  GT2006-90095   
IGTI  2006  Heat Transfer and Pressure Losses in a Narrow Dimpled Channel Structured With Spherical Protrusions  I. Borisov, A. Khalatov, S. Kobzar, and B. Glezer  GT2006-90121*   
IGTI  2006  Improvement of Microturbine Recuperators Using Taguchi Methodology  George Escola, Charles W. Bucey, Preston Montague, Michael J. Telfer, John McClain, Mahesh Patel, Chad Miars, and Michael Shockley  GT2006-90144   
IGTI  2006  Numerical Study of the Heat Transfer in Micro Gas Turbines  T. Verstraete, Z. Alsalihi, and R. A. Van den Braembussche  GT2006-90161   
IGTI  2006  Comparison of Recuperator Alloy Degradation in Laboratory and Engine Testing  Bruce A. Pint, Karren L. More, Rosa Trejo, and Edgar Lara-Curzio  GT2006-90194*   
IGTI  2006  Creep Strength and Microstructure of AL20-25+Nb Alloy Sheets and Foils for Advanced Microturbine Recuperators  Philip J. Maziasz, John P. Shingledecke, Neal D. Evans, Yukinori Yamamoto, Karren L. More, Rosa Trejo, Edgar Lara-Curzio, and Charles P. Stinner  GT2006-90195*   
IGTI  2006  High Pressure Turbocharger for Solid Oxide Fuel Cells  Steven G. Berenyi  GT2006-90222   
IGTI  2006  Thermodynamic Analysis of Different Configurations for Microturbine Cycles in Simple and Cogeneration Systems  Ehsan Sadeghi, Hiwa Khaledi, and Mohammad Bagher Ghofrani  GT2006-90237   
IGTI  2006  CFD Optimization of Gas Inlet Configuration for 100kW Microturbine Recuperator  D. J. Zhang, Q. W. Wang, M. Zeng, L. Q. Luo, F. Wu, and Z. P. Feng  GT2006-90256   
IGTI  2006  Thermal Design of Heat Exchanger With Fins Inside and Outside Tubes  G. N. Xie, Q. Y. Chen, M. Zeng, and Q. W. Wang  GT2006-90260   
IGTI  2006  Comparative Analysis of Microturbines Performance Deterioration and Diagnostics  E. E. B. Gomes, D. McCaffrey, M. J. M. Garces, A. L. Polizakis, and P. Pilidis  GT2006-90304   
IGTI  2006  Micro Gas Turbine With Ceramic Nozzles and Rotor: Part 2  Norihiko Iki, Takahiro Inoue, Takayuki Matsunuma, Hiro Yoshida, Satoshi Sodeoka, Masato Suzuki, Takumi Ebara, and Yoonhwan Lee  GT2006-90328   
IGTI  2006  Steady-State Off-Design Thermodynamic Performance Analysis of a Humid Air Turbine Based on a Micro Turbine  Shijie Zhang and Yunhan Xiao  GT2006-90335   
IGTI  2006  Genetic Algorithm Optimization for Primary Sufaces Recuperator of Microturbine  H. X. Liang, G. N. Xie, M. Zeng, Q. E. Wang, L. Q. Luo, and Z. P. Feng  GT2006-90366*   
IGTI  2006  Characterization of Commercially Available Turbochargers for Possible Application in the UPS System Scenario  Bruno Facchini, Lorenzo Tarchi, and Pier Francesco Piccardi  GT2006-90422   
IGTI  2006  Erosion Lifetime Prediction for a Radial Turbine Operating in a Low Dust Stream  Peter Zimmermann, Christoph Hirsch, and Thomas Sattelmayer  GT2006-90502   
IGTI  2006  Numerical and Experimental Analysis of the Thermo-Mechanical Load on Turbine Wheels of Turbochargers  Tom Heuer, Bertold Engels, Achim Klein, and Horst Heger  GT2006-90526   
IGTI  2006  Automatic Integration in the Design of a Microturbine Compact Recuperator  Marco Manzan, Diego Micheli, and Stefano Pieri  GT2006-90529   
IGTI  2006  An Integrated Design Approach for Micro Gas Turbine Combustors: Preliminary 0-D and Simplified CFD Based Optimization  Luca Fuligno, Diego Micheli, and Carlo Poloni  GT2006-90542   
IGTI  2006  Inlet Air Supercharging of a 70 kW Microturbine  Robert Brandon, Brian Halliday, and John S. Hoffman  GT2006-90555   
IGTI  2006  Investigation of Transient Performance of an Auxiliary Power Unit Microturbine Engine  SooYong Kim, JunYoung Park, and Victor L. Goldenberg  GT2006-90594   
IGTI  2006  Characterization of Porous Carbon Foam as a Material for Compact Recuperators  A. G. Straatman, N. C. Gallego, Q. Yu, and B. E. Thompson  GT2006-90598*   
IGTI  2006  Metallic Alloys for Primary Surface Recuperators  James M. Rakowski, Charles P. Stinner, Mark Lipschutz, and J. Preston Montague  GT2006-90680   
IGTI  2006  Small Gas Turbine Engine Operating With High-Temperature Foil Bearings  Hooshang Heshmat, Michael J. Tomaszewski, and James F. Walton  GT2006-90791   
IGTI  2006  On the Development of an Oil-Free Electric Turbocharger for Fuel Cells  James F. Walton II, Michael J. Tomaszewski, Crystal A. Heshmat, and Hooshang Heshmat  GT2006-90796   
IGTI  2006  Design of a Highly Offset Pipe-to-Annular Flow Inlet  Jack Zausner  GT2006-90861   
IGTI  2006  Numerical Investigation of the Effect of Tip Clearance to the Performance of Small Centrifugal Compressor  Jin Tang, Teemu Turunen-Saaresti, Arttu Reunanen, Juha Honkatukia, and Jaakko Larjola  GT2006-90893   
IGTI  2006  A New Foil Gas Bearing With Compression Springs as Compliant Structure for Microturbomachinery Applications  Ju-Ho Song and Daejong Kim  GT2006-90964   
IGTI  2006  Development of a Design Methodology for Ducted Fan Systems Used in Micro Unmanned Air Vehicle Propulsion  Abraham Engeda  GT2006-91026   
IGTI  2006  Analysis of the Pollutant Formation in the FLOX® Combustion  H. Schütz, R. Lückerath, T. Kretschmer, B. Noll, and M. Aigner  GT2006-91041   
IGTI  2006  Comparison of Transient Modelling Techniques for a Micro Turbine Engine  Craig R. Davison and A. M. Birk  GT2006-91088   
IGTI  2006  Feasibility Study of an Innovative Micro Gas Turbine With a Swiss-Roll Recuperator  Hsin-Yi Shih, David Wang, and C-Ron Kuo  GT2006-91120   
IGTI  2006  Analyzing the Impact of Using Biodiesel in the Parameters of a 30 kW Micro-Turbine Control Model  Manuel A. Rendón, Marco A. R. Do Nascimento, and Pedro P. C. Mendes  GT2006-91259   
IGTI  2006  Experimental Results of a Novel Integrated Energy System Formed by a Microturbine and an Exhaust Fired Single-Double Effect Absorption Chiller  Miquel Nogués, Josh Mauzey, Aaron Freeman, Vincent Mcdonell, and Scott Samuelsen  GT2006-91264   
IGTI  2006  The Blade Strength and the Dynamic Characteristics of High Speed Micro-Turbines  Jao Hwa Kuang, Huang-Sheng Chen, and Tsung-Pin Hung  GT2006-91312   
IGTI  2006  Centrifugal Rotor Tri-Hub Burst for Containment System Validation  B. Manavi  GT2006-90120   
IGTI  2006  Evolution of Slip Through the Thickness of a Single-Crystal Nickel-Base Superalloy Notched Specimen  Shadab Siddiqui, Nagaraj K. Arakere, and Fereshteh Ebrahimi  GT2006-90454   
IGTI  2006  Quantification of Uncertainty Related to Stress Estimation in Turbine Blades  Giorgio Calanni, Vitali Volovoi, Massimo Ruzzene, Peter Cento, and Charlie Vining  GT2006-90585   
IGTI  2006  Compressor Rubbing Risk Analyses for Combustion Turbine Using Thermomechanical and Dynamical FE Modeling  Franck T. Meissonnier and Carlo M. Stoisser  GT2006-90835   
IGTI  2006  DACE Based Probabilistic Optimization of Mechanical Components  Vinay Ramanath and Gene E. Wiggs  GT2006-91024   
IGTI  2006  Structural Synthesis and Enumeration of Epicyclic Gear Mechanisms Up to 12-Links Using Acyclic Graph Method  M. S. El-Gayyar, H. M. El-Eashy, and M. Zaki  GT2006-91136   
IGTI  2006  Analytical Derivatives Technology for Parametric Shape Design and Analysis in Structural Applications  Srikanth Akkaram, Jean-Daniel Beley, Bob Maffeo, and Gene Wiggs  GT2006-90057   
IGTI  2006  Computation of Eigenvalues and Eigenvectors of a Mistuned Bladed Disk  Alok Sinha  GT2006-90087   
IGTI  2006  Statistical Distribution of the Peak Maximum Amplitude of the Forced Response of a Mistuned Bladed Disk: Some Investigations and Applications of Neural Networks  Alok Sinha  GT2006-90088   
IGTI  2006  Dynamic Behavior of a Spherical Friction Damper and Its Implication to Damper Contact Stiffness  K.-H. Koh and J. H. Griffin  GT2006-90102*   
IGTI  2006  Prediction of Shrouded Turbomachinery Blade Forced Response by a Complex Mode Analysis  Hsiao-Wei D. Chiang and Chih-Neng Hsu  GT2006-90112   
IGTI  2006  Advanced Modelling of Underplatform Friction Dampers for Analysis of Bladed Disc Vibration  E. P. Petrov and D. J. Ewins  GT2006-90146   
IGTI  2006  Direct Parametric Analysis of Resonance Regimes for Nonlinear Vibrations of Bladed Discs  E. P. Petrov  GT2006-90147*   
IGTI  2006  Forced Vibration of Several Bladed Discs on the Shaft  Romuald Rzadkowski and Marcin Drewczynski  GT2006-90158   
IGTI  2006  Analysis of Variation of Natural Frequency and Resonant Stress of Blade  Yasutomo Kaneko, Kazushi Mori, Hiroyuki Yamashita, and Kenji Sato  GT2006-90176   
IGTI  2006  Mistuning Phenomena on Bladed Disk: Industrial Methods and Applications  Jean-Pierre Lombard, Jérôme Dupeux, Christian Dupont, Francois Garcin, and Stephane Baumhauer  GT2006-90205   
IGTI  2006  Coriolis Forces in Forced Response Analysis of Mistuned Bladed Discs  M. Nikolic, E. P. Petrov, and D. J. Ewins  GT2006-90315*   
IGTI  2006  The Importance of Batch Effects When Considering Damaged Holes in Manufacture  R. S. J. Corran  GT2006-90337   
IGTI  2006  The Estimation of the Contact Stiffness for Direct and Indirect Coupled Turbine Blading  Christian Siewert, Lars Panning, Annika Schmidt-Fellner, and Andreas Kayser  GT2006-90473   
IGTI  2006  Mistuning Identification and Model Updating of an Industrial Blisk  Denis Laxalde, Fabrice Thouverez, Jean-Jacques Sinou, Stéphane Baumhauer, and Jean-Pierre Lombard  GT2006-90569   
IGTI  2006  Forced Response Analysis of Shrouded Blades by an Alternating Frequency/Time Domain Method  Shi Yajie, Hong Jie, Shan Yingchun, and Zhu Zigen  GT2006-90595   
IGTI  2006  Fracture Analysis of Cracks in Orthotropic Materials Using ANSYS®  A. O. Ayhan, A. C. Kaya, A. Loghin, J. H. Laflen, R. D. McClain, and D. Slavik  GT2006-90599   
IGTI  2006  Lifetime Prediction of Components Including Initiation Phase  Michael Besel and Angelika Brueckner-Foit  GT2006-90710*   
IGTI  2006  Experimental Characterization of Contact Hysteresis at High Temperatures  Sergio Filippi, Esequiel B. Rodrigues, and Muzio M. Gola  GT2006-90757   
IGTI  2006  An Experimental Method for the Measurement of Blade-Root Damping  Marco Allara, Sergio Filippi, and Muzio M. Gola  GT2006-90774   
IGTI  2006  Application of Nonparametric Methods to Rainflow Stress Density Estimation of Gas Turbine Engine Usage  M. P. Enright, R. C. McClung, S. J. Hudak, and H. R. Millwater  GT2006-90780   
IGTI  2006  Forced Response of Bladed Disks in Cyclic Symmetry With Underplatform Dampers  Stefano Zucca, Juan Borrajo, and Muzio M. Gola  GT2006-90785   
IGTI  2006  Probabilistic Treatment of Crack Nucleation and Growth for Gas Turbine Engine Materials  M. P. Enright, R. C. McClung, S. J. Hudak, and W. L. Francis  GT2006-90813*   
IGTI  2006  The Development of Anomaly Distributions for Machined Holes in Aircraft Engine Rotors  Richard Corran, Michael Gorelik, Darryl Lehmann, and Stephane Mosset  GT2006-90843   
IGTI  2006  The Method of Accounting for Loading Cycle Asymmetry in Gas Turbine Engine Components’ Cyclic Durability Analysis  R. H. Muratov  GT2006-90884   
IGTI  2006  Forced Response Variation of Aerodynamically and Structurally Mistuned Turbomachinery Rotors  I. Sladojevic, E. P. Petrov, M. Imregun, and A. I. Sayma  GT2006-90948   
IGTI  2006  Numerical and Experimental Damping Assessment of a Thin-Walled Friction Damper in the Rotating Set-Up With High Pressure Turbine Blades  J. Szwedowicz, C. Gibert, T. P. Sommer, and R. Kellerer  GT2006-90951   
IGTI  2006  Impact of Manufacturing Variability on Combustor Liner Durability  Sean D. Bradshaw and Ian A. Waitz  GT2006-91098   
IGTI  2006  Neural Network Models for Usage Based Remaining Life Computation  Girija Parthasarathy, Sunil Menon, Kurt Richardson, Ahsan Jameel, Dawn Mcnamee, Tori Desper, Michael Gorelik, and Chris Hickenbottom  GT2006-91099*   
IGTI  2006  A Fracture Mechanics Based Methodology for Fatigue Life Prediction of Single Crystal Nickel Based Superalloys  Srikant Ranjan and Nagaraj K. Arakere  GT2006-91111*   
IGTI  2006  Role of Quantitative NDE Techniques in Life Management of Gas Turbine Components  Michael Gorelik, Waled T. Hassan, and Harry Kington  GT2006-91337   
IGTI  2006  Probabilistic Prediction of Aviation Engine Critical Parts Lifetime  Y. A. Nozhnnitski, E. A. Lokshtanov, I. N. Dolgopolov, G. V. Shashurin, M. E. Volkov, N. V. Tsykunov, and I. I. Ganelin  GT2006-91350   
IGTI  2006  3D Viscous Flutter in Turbomachniery Cascade by Godunov-Kolgan Method  Romuald Rzadkowski, Vitally Gnesin, and Luba Kolodyazhnaya  GT2006-90157   
IGTI  2006  Stability Increase of Aerodynamically Unstable Rotors Using Intentional Mistuning  Carlos Martel, Roque Corral, and José Miguel Llorens  GT2006-90407   
IGTI  2006  The Effect of Stagger Variability in Gas Turbine Fan Assemblies  Mark J. Wilson, Mehmet Imregun, and Abdulnaser I. Sayma  GT2006-90434   
IGTI  2006  An Experimental Investigation Into Turbine Flutter Characteristic at Different Tip-Clearances  X. Q. Huang, L. He, and D. L. Bell  GT2006-90541   
IGTI  2006  Scaling of Turbine Blade Unsteady Pressures for Rapid Forced Response Assessment  J. S. Green and T. H. Fransson  GT2006-90613   
IGTI  2006  Active Suppression of Cascade Flutter With Piezoelectric Device  Junichi Kazawa and Toshinori Watanabe  GT2006-90645   
IGTI  2006  A Methodology for the Vibration Amplitude Prediction of Self-Excited Rotors Based on Dimensional Analysis  Roque Corral and Juan Manuel Gallardo  GT2006-90668   
IGTI  2006  Effect of Bleed Flows on Flutter and Forced Response in Core Compressors  Luca di Mare, George Simpson, Bernhard Mueck, and Abdulnaser I. Sayma  GT2006-90683   
IGTI  2006  Fan Forced Response Due to Ground Vortex Ingestion  Luca di Mare, George Simpson, and Abdulnaser I. Sayma  GT2006-90685   
IGTI  2006  Analytical Maps of Aerodynamic Damping as a Function of Operating Condition for a Compressor Profile  Paul J. Petrie-Repar, Andrew McGhee, Peter A. Jacobs, and Rowan Gollan  GT2006-90829   
IGTI  2006  Probabilistic Flutter Analysis of a Mistuned Bladed Disk  Robert E. Kielb, Kenneth C. Hall, Esther Hong, and Shantaram S. Pai  GT2006-90847   
IGTI  2006  Experimental Investigation of Mode Shape Sensitivity of an Oscillating LPT Cascade at Design and Off-Design Conditions  Damian M. Vogt and Torsten H. Fransson  GT2006-91196*   
IGTI  2006  Experimental Results From Controlled Blade Tip/Shroud Rubs at Engine Speed  Corso Padova, Jeffrey Barton, Michael G. Dunn, and Steve Manwaring  GT2006-90049   
IGTI  2006  Evaluation of Tolerable Misalignment Areas of Bearings of Multi-Support Rotating Machine  Jozef Rybczynski  GT2006-90111   
IGTI  2006  Transient Rotor/Active Magnetic Bearing Control Using Sampled Wavelet Coefficients  Iain S. Cade, Patrick S. Keogh, and M. Necip Sahinkaya  GT2006-90212*   
IGTI  2006  Dynamic Properties of Tilting-Pad Journal Bearings: Experimental and Theoretical Investigation of Frequency Effects Due to Pivot Flexibility  Waldemar Dmochowski  GT2006-90280*   
IGTI  2006  Test Results and Analytical Predictions for Rotor Drop Testing of an AMB Expander/Generator  Lawrence Hawkins, Alexei Filatov, Shamim Imani, and Darren Prosser  GT2006-90283*   
IGTI  2006  Rotordynamic Stability Predictions for Centrifugal Compressors Using a Bulk-Flow Model to Predict Impeller Shroud Force and Moment Coefficients  Manoj K. Gupta and Dara W. Childs  GT2006-90374*   
IGTI  2006  Dynamic Response of a Geared Rotor-Bearing System Under Residual Shaft Bow Effect  T. N. Shiau, E. K. Lee, Y. C. Chen, and T. H. Young  GT2006-90435   
IGTI  2006  Rotordynamic Analysis of a Large Industrial Turbo-Compressor Including Finite Element Substructure Modeling  J. Jeffrey Moore, Giuseppe Vannini, Massimo Camatti, and Paolo Bianchi  GT2006-90481   
IGTI  2006  Test Evolution and Oil-Free Engine Experience of a High Temperature Foil Air Bearing Coating  Daniel Lubell, Christopher DellaCorte, and Malcolm Stanford  GT2006-90572   
IGTI  2006  Vibration Reduction Investigation of a Squeeze Film Damper With Valvular Metal Rubber  Ma Yanhong, Hong Jie, and Deng Yin  GT2006-90596   
IGTI  2006  Experimental Contribution to High Precision Characterization of Magnetic Forces in Active Magnetic Bearings  Klaus Kjřlhede and Ilmar F. Santos  GT2006-90658*   
IGTI  2006  A Design to Improve the Effective Damping Characteristics of Hole-Pattern-Stator Annular Gas Seals  Dara W. Childs, Yoon-Shik Shin, and Brent Seifert  GT2006-90777   
IGTI  2006  A Design to Increase the Static Stiffness of Hole Pattern Stator Gas Seals  Dara W. Childs, Yoon-Shik Shin, and John Wade  GT2006-90778   
IGTI  2006  Identification of Force Coefficients in a Squeeze Film Damper With a Mechanical Seal: Part I — Unidirectional Load Tests  Luis San Andrés and Adolfo Delgado  GT2006-90782*   
IGTI  2006  Effect of Misalignment on the Characteristics of Journal Bearings  A. M. Ahmed and A. El-Shafei  GT2006-90810   
IGTI  2006  High-Pressure Pocket Damper Seals: Leakage Rates and Cavity Pressures  Ahmed M. Gamal, Bugra H. Ertas, and John M. Vance  GT2006-90858   
IGTI  2006  A Virtual Tool for Prediction of Turbocharger Nonlinear Dynamic Response: Validation Against Test Data  Luis San Andrés, Juan Carlos Rivadeneira, Kostandin Gjika, Christopher Groves, and Gerry LaRue  GT2006-90873*   
IGTI  2006  Use of Restoring Moment on Main Shaft Thrust Bearings for Turboprop Engines With High Predicted Values of Misalignment  Javier Castillo, Erlantz Cristobal, and Robin Lang  GT2006-90929   
IGTI  2006  Model Reduction of Large Rotor-Bearing-Foundation Systems  N. Zhang, W. Hu, and E. J. Hahn  GT2006-90941   
IGTI  2006  Analysis of Leakage Flow and Dynamic Characteristics in Floating Ring Seals for High Pressure Turbopump  Yong-Bok Lee, Chang-Ho Kim, Wenbo Duan, and Fulei Chu  GT2006-91008   
IGTI  2006  Traction Characteristics of a Rolling Element Bearing Under Rapid Acceleration and Implications for Auxiliary Operation in Magnetic Bearing Systems  Matthew O. Cole and Theeraphong Wongratanaphisan  GT2006-91021   
IGTI  2006  Rotordynamic Force Coefficients of Pocket Damper Seals  B. Ertas, A. Gamal, and J. Vance  GT2006-91058*   
IGTI  2006  Experimental Measurement of a Three Lobe Air Bearing Rotordynamic Coefficients  Rafael O. Ruiz, Marcelo H. Di Liscia, Sergio Diaz, and Luis Medina  GT2006-91068   
IGTI  2006  System Identification of a Rotor System With Hydrodynamic Bearing by Eigensystem Realization Algorithm (ERA) With an Optimum Doping Signal  T. N. Shiau, C. H. Cheng, and M. S. Tsai  GT2006-91114   
IGTI  2006  The Lomakin Effect in Annular Gas Seals Under Chocked Flow Conditions  Mihai Arghir, Cyril Defaye, and Jean Fręne  GT2006-91151   
IGTI  2006  Rotordynamic Performance of a Rotor Supported on Bump Type Foil Gas Bearings: Experiments and Predictions  Luis San Andrés, Dario Rubio, and Tae Ho Kim  GT2006-91238   
IGTI  2006  Thermal Management Phenomena in Foil Gas Thrust Bearings  Brian Dykas, Joseph Prahl, Christopher DellaCorte, and Robert Bruckner  GT2006-91268   
IGTI  2006  Advanced Degradation Rates for High Power LM2500 Applications  Matthew J. Driscoll and Thomas Habib  GT2006-90114   
IGTI  2006  Investigation of Compressor Rear Frame Cracking of United States Navy LM2500 Gas Turbine Engines  Matthew J. Driscoll and Peter D. Descar  GT2006-90115   
IGTI  2006  LM500: Packaged Power for the All-Electric Ship  Fred T. Willett and Mark Patel  GT2006-90252   
IGTI  2006  Flywheel Energy Storage System for Naval Applications  Co Huynh, Patrick McMullen, Alexei Filatov, Shamim Imani, Hamid A. Toliyat, and Salman Talebi  GT2006-90270   
IGTI  2006  More Efficient Applications for Naval Gas Turbines: Addressing the Mismatch Between Available Technology and the Requirements of Modern Naval Gas Turbine Inlets  Alan D. Oswald and Stephen D. Hiner  GT2006-90305   
IGTI  2006  Development, Testing, and Qualification of the Marine LM6000 Gas Turbine  David Sidenstick, Glenn McAndrews, Ravi Tanwar, and Scott Farley  GT2006-90709   
IGTI  2006  Swedish Navy YS2000 Visby Class Propulsion System Refinements  Kenneth M. Braccio, Joe Ranero, Peter B. Nilsson, Magnus Olsson, and Gerrick Slogar  GT2006-90713   
IGTI  2006  Gas Turbine Propulsion for LNG Transports  Louis Ellington, Glenn McAndrews, and Ravi Tanwar  GT2006-90715   
IGTI  2006  A Dynamic Model for a Shipboard PEM Fuel Cell Reformer System With an Integrated Gas Turbine  Steven P. Miller, John M. Heinzel, John H. Kuseian, Donald J. Hoffman, Edward M. House, Anthony Nickens, and Vasilis Tsourapas  GT2006-90739   
IGTI  2006  Marine Gas Turbine Propulsion System Applications  David J. Bricknell  GT2006-90751   
IGTI  2006  Resolving Landing Craft Air Cushion Main Engine Starter Valve Corrosion Issues  James D. Hampshire and Lee Myers  GT2006-90848   
IGTI  2006  Electric Start and Generation Systems for Gas Turbines: A Means to Self Sustainability  Ian Timbrell, Steve Mason, Alan Green, and Neil McCallum  GT2006-90911   
IGTI  2006  Development and Testing of a Low Power Gas Turbine Alternator: The ACL-GTA  Ian Timbrell, Jean-Luc Thouvenot, Vincent Poumarde, and Neil McCallum  GT2006-90914   
IGTI  2006  Technology Insertion in the U.S. Navy  Martin Quinones and Kevin D. Fauvell  GT2006-91075   
IGTI  2006  The Influence of Atmospheric Conditions on the Performance of Combined Cycle Gas Turbine Power Plants  Manuel Valdés, Antonio Rovira, and José A. Fernández  GT2006-90204   
IGTI  2006  Parts Life Management: Essential for Minimizing Life Cycle Costs  Salvatore A. DellaVilla and Robert F. Steele, Jr.  GT2006-90219   
IGTI  2006  Gas Turbine Inlet Fogging System Tuning: Operator Point of View  Y. Hain and V. Litinetski  GT2006-90297   
IGTI  2006  Savings Achieved From Installation of an On-Line Performance Monitoring System at the Naco Nogales Combined Cycle Plant  Fernando Ramos Fernandez De Bobadilla, Joe Nasal, Sid Sutherland, and Greg Noe  GT2006-90485   
IGTI  2006  Heavy Duty Gas Turbine Simulation: Global Performances Estimation and Secondary Air System Modifications  Carlo Carcasci, Bruno Facchini, Stefano Traverso, Stefano Gori, and Luca Bozzi  GT2006-90905   
IGTI  2006  Comparative Evaluation of Advanced Gas Turbine Cycles With Modified Blade Cooling Models  Arian Tabari, Hiwa Khaledi, and Ali Hajilouy Benisi  GT2006-90932   
IGTI  2006  Syngas Capable Combustion Systems Development for Advanced Gas Turbines  Satish Gadde, Jianfan Wu, Anil Gulati, Gerry M. McQuiggan, Berthold Koestlin, and Bernd Prade  GT2006-90970   
IGTI  2006  Connection of Thermal and Emissions: Performance of GT-Plants  Axel W. von Rappard and Helmer Andersen  GT2006-91069   
IGTI  2006  A Theoretical Solid Oxide Fuel Cell Model for System Controls and Stability Design  George Kopasakis, Thomas Brinson, Sydni Credle, and Ming Xu  GT2006-91247   
IGTI  2006  Global Energy Market: Past, Present and Future  R. K. Bhargava  GT2006-91322   
IGTI  2006  Expanding the Reliability Process to More Accurately Assess Business Risks and Opportunities Associated With Long-Term Maintenance Contracts  Michael A. Burkett  GT2006-90022   
IGTI  2006  DMTRADE: A Rolls-Royce Tool to Model the Impact of Design Changes and Maintenance Strategies on Lifetime Reliability and Maintenance Cost  Michael A. Burkett  GT2006-90023   
IGTI  2006  Requirements and Advances in Simulating Aircraft Inlet Total Pressure Distortion in Turbine Engine Ground Tests  Dave Beale, Milt Davis, and Jim Sirbaugh  GT2006-90038   
IGTI  2006  Modeling of Heat Transfer and Clearance Changes in Transient Performance Calculations: A Comparison  Rasmus S. Merkler and Stephan Staudacher  GT2006-90041   
IGTI  2006  Calibration of a Subscale F/A-22 Engine Inlet Empirical Model Using Ground and Flight Test Data  Jeffrey F. Monaco, David S. Kidman, Randall L. Bickford, and Donald J. Malloy  GT2006-90050   
IGTI  2006  Inverse Modeling Techniques for Parameter Estimation in Engineering Simulation Models  Srikanth Akkaram, Don Beeson, Harish Agarwal, and Gene Wiggs  GT2006-90058   
IGTI  2006  Mapping the Control Parameters of an Analog Fuel Control to Prepare for the Retrofit of a Digital Control Unit  Stephan G. Scheidler, Stefan Bindl, and Christian Mundt  GT2006-90126   
IGTI  2006  Ground Test Data Validation Using a Subscale F/A-22 Engine Inlet Empirical Model  Randall L. Bickford, Donald J. Malloy, Jeffrey F. Monaco, and David S. Kidman  GT2006-90165   
IGTI  2006  Advances in Engine Test Capabilities at the NASA Glenn Research Center’s Propulsion System Laboratory  Peter M. Pachlhofer, Joseph W. Panek, Dennis J. Dicki, Barry R. Piendl, Paul J. Lizanich, and Gary A. Klann  GT2006-90181   
IGTI  2006  Gas Turbine Engine Performance Model Applications Using an Object-Oriented Simulation Tool  A. Alexiou and K. Mathioudakis  GT2006-90339   
IGTI  2006  Effects of Inlet Flow Distortion on the Performance of Aircraft Gas Turbines  Joachim Kurzke  GT2006-90419   
IGTI  2006  Understanding the Aftermarket: Applying Agent-Based Modelling to Service Infrastructure Design  Mark J. Cheeseman, Douglas K. Smith, and Graham B. Hesketh  GT2006-90465   
IGTI  2006  Design for Service: Harmonising Product Design With a Services Strategy  Andrew Harrison  GT2006-90570   
IGTI  2006  Robust Design: Methods and Application to Real World Examples  A. Karl, G. May, C. Barcock, G. Webster, and N. Bayley  GT2006-90649   
IGTI  2006  A Multidisciplinary Aero-Engine Exhaust Emission Study  Savad A. Shakariyants, Jos P. van Buijtenen, Wilfried P. J. Visser, and Alexander Tarasov  GT2006-90749   
IGTI  2006  CFD Analysis of Hot Gas Ingestion Mechanisms for the Vertical Descent Phase of a Harrier Aircraft  G. A. Richardson, W. N. Dawes, and A. M. Savill  GT2006-90766   
IGTI  2006  Experience With GSP as a Gas Path Analysis Tool  W. P. J. Visser, H. Pieters, M. Oostveen, and E. van Dorp  GT2006-90904   
IGTI  2006  A Probabilistic Risk-Based Approach to Assess NASA Aeronautics Technologies  Michael T. Tong  GT2006-91007   
IGTI  2006  Fully Automated Model Based Performance Analysis Procedure for Online and Offline Applications  Michael Bauer and Stephan Staudacher  GT2006-91050   
IGTI  2006  Nacelle Design for Mixed Turbofan Engines  Jesuíno Takachi Tomita, Cleverson Bringhenti, Joăo Roberto Barbosa, and Antonio Batista de Jesus  GT2006-91212   
IGTI  2006  Droplet Trajectories and Collection on Fan Rotor at Off-Design Conditions  Kaushik Das, Awatef A. Hamed, and Debashis Basu  GT2006-91214   
IGTI  2006  Mitigation of Marine Gas Turbine Water Wash Risks  Lance Shappell, Lee Myers, and Jason Hunter  GT2006-91167   
IGTI  2006  Development, Testing and Implementation of a Gas Turbine Starting Clutch With Manual Turning Feature for U.S. Navy Ships  Morgan L. Hendry and Matthew G. Hoffman  GT2006-91256*   
IGTI  2006  The Evolution of Gas Turbine Generator Set Reliability in the U.S. Navy  Dennis M. Russom and Ivan Pineiro  GT2006-91301   
IGTI  2006  LHD 8 Propulsion Machinery Control System Design and Integration  Vincent P. Tolotta and Howard Harris  GT2006-91313   
IGTI  2006  The Effect of Surface Roughness on Axial Compressor Performance Deterioration  Elisabet Syverud and Lars E. Bakken  GT2006-90004   
IGTI  2006  Recognition and Prevention of Distillate Fuel Emulsions  T. D. Newbound, A. N. Al-Nasser, M. P. Sang, and W. J. Carrigan  GT2006-90030   
IGTI  2006  Identification and Clean-Up of Contaminants From Vaporized NGL CGT Fuel  T. D. Newbound, J. W. Beckenbach, and H. M. Al-Mutawa  GT2006-90031   
IGTI  2006  Prediction of Gas Turbine Blade Life: An Interdisciplinary Engineering Approach for Condition-Based Maintenance  Huitang Jin, Robert Pistor, Paul Lowden, Ben Weber, and Ryan Grant  GT2006-90037   
IGTI  2006  Asymmetric Solution for Compressor Station Spare Capacity  Rainer Kurz and Matt Lubomirsky  GT2006-90069   
IGTI  2006  Pulsations in Centrifugal Compressor Systems  Rainer Kurz, Robert McKee, and Klaus Brun  GT2006-90070   
IGTI  2006  Optimization of a Real-Time Simulator Based on Recurrent Neural Networks for Compressor Transient Behavior Prediction  M. Venturini  GT2006-90117   
IGTI  2006  Development of a One-Dimensional Modular Dynamic Model for the Simulation of Surge in Compression Systems  M. Morini, M. Pinelli, and M. Venturini  GT2006-90134*   
IGTI  2006  Upgrading of Aged Turbomachinery Through Modernization, Uprate and Selective Replacement of Oil and Gas Processing Plants  Valter Quercioli  GT2006-90557   
IGTI  2006  An Internal Flow Measurement That Senses a Pre-Cursor to Surge in Centrifugal Compressors  Robert J. McKee  GT2006-90601   
IGTI  2006  Uncertainty Analysis of Centrifugal Compressor Aero-Performance Test Data: Effects of Correlated Systematic Error  José L. Gilarranz R.  GT2006-90955   
IGTI  2006  Numerical and Experimental Study of Ventilation for Gas Turbine Package Enclosure  Daniel Vahidi, Hamid Bagheri, and Boris Glezer  GT2006-90960   
IGTI  2006  A Revised Compressor Polytropic Performance Analysis  Řyvind Hundseid, Lars E. Bakken, and Tor Helde  GT2006-91033   
IGTI  2006  Wet Gas Performance Analysis  Řyvind Hundseid and Lars E. Bakken  GT2006-91035   
IGTI  2006  Reconstruction of the Control Systems of 6MW Turbosets in Compressor Stations Kralice and Kourim  Jiri Kyncl and Jindrich Patocka  GT2006-91130   
IGTI  2006  “SMART ENGINE”: A Gas Turbine Fault Diagnostics and Life Management Tool  Suresh Sampath, Luca Marinai, Riti Singh, and Ankush Gulati  GT2006-91211   
IGTI  2006  Aerodynamic Instability Effects on Compressor Blade Failure: A Root Cause Failure Analysis  Harold R. Simmons, Klaus Brun, and Sastry Cheruvu  GT2006-91353   
IGTI  2006  Performance Analysis of APT (Atmospheric Pressure Turbine): Molten Carbonate Fuel Cell Hybrid System  Yoshiharu Tsujikawa, K. Kaneko, T. Yamauchi, and S. Katsura  GT2006-90091   
IGTI  2006  Taurus™ 65 Gas Turbine Product  David Teraji  GT2006-90099   
IGTI  2006  Assessment of the Robustness of Gas Turbine Diagnostics Tools Based on Neural Networks  R. Bettocchi, M. Pinelli, P. R. Spina, M. Venturini, and G. A. Zanetta  GT2006-90118   
IGTI  2006  Static and Dynamic Neural Networks for Simulation and Optimization of Cogeneration Systems  Roozbeh Zomorodian, Hiwa Khaledi, and Mohammad Bagher Ghofrani  GT2006-90236   
IGTI  2006  Thermodynamic Optimization of a Combined Cycle Cogeneration Plant With Backpressure Steam Turbine  K. Sarabchi and R. Akbarpour  GT2006-90243   
IGTI  2006  Implementation and Operation of a CCGT Power Plant for a Chemical Plant: How to Cover Special Steam Conditions  Gabor Bercsi, Zsolt Czibere, and Viktor Varga  GT2006-90334   
IGTI  2006  Development and Validation of a Computational Code for Wet Compression Simulation of Gas Turbine  M. Bagnoli, M. Bianchi, F. Melino, and P. R. Spina  GT2006-90342*   
IGTI  2006  Application of a Computational Code to Simulate Interstage Injection Effects on GE Frame 7EA Gas Turbine  M. Bagnoli, M. Bianchi, F. Melino, A. Peretto, P. R. Spina, S. Ingistov, and R. K. Bhargava  GT2006-90343*   
IGTI  2006  Continuing Improvements of 20MW-Class GT Kawasaki L20A  Ryozo Tanaka, Takao Sugimoto, Masanori Ryu, Masayoshi Kinugawa, and Kouichiro Tsuji  GT2006-90394   
IGTI  2006  Fog and Overspray Cooling for Gas Turbine Systems With Low Calorific Value Fuels  Jabaidur Rahman Khan and Ting Wang  GT2006-90396   
IGTI  2006  Water Injection Effects on Compressor Stage Operation  I. Roumeliotis and K. Mathioudakis  GT2006-90427*   
IGTI  2006  An Assessment of High-Fogging Potential for Enhanced Compressor Performance  Kyoung Hoon Kim and Horacio Perez-Blanco  GT2006-90482   
IGTI  2006  Parametric Study of the Combined Fuel Cell-Gas Turbine Power Plant  F. S. Bhinder, Munzer S. Y. Ebaid, Moh’d Yazid F. Mustafa, Raj K. Calay, and Mohammed H. Kailani  GT2006-90607   
IGTI  2006  Performance Evaluation of Gas Turbine Cogeneration Plants Using a Design Optimization Tool: OPS-Design  Ryohei Yokoyama and Koichi Ito  GT2006-90611   
IGTI  2006  How to Change Over Heat Recovery Steam Generators After Gas Turbine Trip  Gottfried Brandstetter, Wolfgang Oberleitner, and Michael Pichler  GT2006-90648   
IGTI  2006  Flow Reversal in a Horizontal Type Natural Circulation Heat Recovery Steam Generator  Heimo Walter and Wladimir Linzer  GT2006-90689   
IGTI  2006  An Investigation of the Use of Wet Compression in Industrial Centrifugal Compressors  Ahmed Abdelwahab  GT2006-90695   
IGTI  2006  Axial Compressor Overhaul: Part II  Steve Ingistov  GT2006-90698   
IGTI  2006  Thermal Modeling of HRSG Transient Behavior in Combined Cycle Power Plants  Sepehr Sanaye and Moein Rezazadeh  GT2006-90718   
IGTI  2006  Effects of Inlet Fogging and Wet Compression on Gas Turbine Performance  Sepehr Sanaye, Hossein Rezazadeh, Mehrdad Aghazeynail, Mehrdad Samadi, Daryoush Mehranian, and Mohammad Kazem Ahangaran  GT2006-90719   
IGTI  2006  Thermal and Economic Analysis of Besat Steam Power Plant Repowering  Sepehr Sanaye, Younes Hamzeie, Mohammad Reza Malekian, and Mohammad Reza Sohrabi  GT2006-90720   
IGTI  2006  Thermal and Economic Analysis of Gas Turbine Steam Injection Plant  Sepehr Sanaye, Vahid Mahdikhani, Ziaeddin Khajeh Karimeddini, and Gholamreza Sadri  GT2006-90721   
IGTI  2006  Number and Nominal Power of Prime Movers in Combined Heat and Power Systems  Sepehr Sanaye, Mehdi Aghaee Meibodi, Shahabeddin Shokrollahi, and Habibollah Fouladi  GT2006-90724   
IGTI  2006  Important Parameters and Performance Testing of Evaporative Inlet Air Cooling System for Gas Turbines: A User’s Experience  Hemant Gajjar  GT2006-90744   
IGTI  2006  Implementation of a System for the Analysis and Evaluation of Advantages of Distributed Generation  Stefania Proietti, Livia Arcioni, and Umberto Desideri  GT2006-90765   
IGTI  2006  An Overview of Turbine Combustor Development for Coal-Based Oxy-Syngas Systems  Keith Pronske, Larry Trowsdale, Scott Macadam, Fermin Viteri, Frank Bevc, and Dennis Horazak  GT2006-90816   
IGTI  2006  Construction and Performance Evaluation of Prototype Atmospheric Pressure Turbine (APT)  K. Inoue, E. Harada, J. Kitajima, and K. Tanaka  GT2006-90938   
IGTI  2006  A New Approach to Optimization of Cogeneration Systems Using Genetic Algorithm  Roozbeh Zomorodian, Hiwa Khaledi, and Mohammad Bagher Ghofrani  GT2006-90952   
IGTI  2006  Application of Inlet Fogging for Power Augmentation of Mechanical Drive Turbines in the Oil and Gas Sector  Abdalla M. Al-Amiri, Montaser M. Zamzam, Mustapha A. Chaker, and Cyrus B. Meher-Homji  GT2006-91054   
IGTI  2006  Numerical Simulation of Aerodynamic Performances of Wet Compression Compressor Cascade  Qun ZhengShao, Yan Shao, and Yinyong Zhang  GT2006-91125   
IGTI  2006  The Optimum Parameters of a HTGR Helium Turbine Cycle and Numerical Analyses of Helium Turbine Cascades  Jiahui Zhou, Qun Zheng, and Yijin Li  GT2006-91126   
IGTI  2006  Multi-Objective Optimization and Performance Analysis of BCHP Systems Using Genetic Algorithms  Jintao Huang, Chen Yue, and Zhenping Feng  GT2006-91143   
IGTI  2006  Support for Operation Strategy in CHP Plants With Gas Turbines  Gerard Kosman, Tadeusz Chmielniak, and Wojciech Kosman  GT2006-91153   
IGTI  2006  On the Importance of Adaptive Control in Extraction/Condensing Turbines  Piotr Lampart and Romuald Puzyrewski  GT2006-91160   
IGTI  2006  Performance and Numerical Flow Investigation of an Industrial Gas Turbine Intake System Under Different Operating Conditions  Friederike C. Mund and Pericles Pilidis  GT2006-91215   
IGTI  2006  Comparative Investigation of Advanced Combined Cycles  Hiwa Khaledi and Kazem Sarabchi  GT2006-90011   
IGTI  2006  MS7001EA Gas Turbine Stage 3 Up-Rate: Design and Field Validation  Philip L. Andrew, Poorna Krishnakumar, Bruce L. Smith, Daniel D. Snook, and Thomas P. Schmitt  GT2006-90188