| Papers |
| Conference |
Year |
Paper Title |
Paper Author |
Page Number |
Other |
| IGTI |
2008 |
An Object-Oriented Computer Code for Aircraft Engine Weight Estimation |
Michael T. Tong; Bret A. Naylor |
GT2008-50062 |
|
| IGTI |
2008 |
Integrated Test and Evaluation Techniques as Applied to an Inlet Swirl Investigation Using the F109 Gas Turbine Engine |
Milt Davis, Dave Beale; Yogi Sheoran |
GT2008-50074 |
|
| IGTI |
2008 |
United Modeling of Working Process in Aircraft Gas Turbine Engines |
M. Ivanov, B. I. Mamaev, R. Z. Nigmatullin |
GT2008-50185 |
|
| IGTI |
2008 |
Application of Numerical Analysis Tools for Airframe-Propulsion Integrated Test and Evaluation |
Milt W. Davis Jr., Alan A. Hale; Charles Vining; William T. Cousins |
GT2008-50194 |
|
| IGTI |
2008 |
Automated Methods to Calibrate a High-Fidelity Thrust Deck to Aid Aeropropulsion Test and Evaluation |
Jeffrey F. Monaco; David S. Kidman; Donald J. Malloy; David G. Ward, James F. Gist IV |
GT2008-50213 |
|
| IGTI |
2008 |
Relight Envelope of a Military Gas Turbine Engine: An Experimental Study |
R. K. Mishra, G. Gouda, B. S. Vedaprakash |
GT2008-50256 |
|
| IGTI |
2008 |
Volume Dynamics Propulsion System Modeling for Supersonics Vehicle Research |
George Kopasakis, Joseph W. Connolly, Daniel E. Paxson; Peter Ma |
GT2008-50524 |
|
| IGTI |
2008 |
An Approach to Maintenance Cost Estimation for Aircraft Engines |
Myoungcheol Kang; Stephen Ogaji, Pericles Pilidis; Changduk Kong |
GT2008-50564 |
|
| IGTI |
2008 |
Full 3D Conjugate Heat Transfer Simulation and Heat Transfer Coefficient Prediction for the Effusion-Cooled Wall of a Gas Turbine Combustor |
Andreas Jeromin, Christian Eichler, Berthold Noll, Manfred Aigner |
GT2008-50422 |
|
| IGTI |
2008 |
Effective Thermoelastic Properties of Flat and Curved Transpiration Cooled Multilayer Plates via Homogenization |
Gottfried Laschet, Stephan Rex |
GT2008-50590 |
|
| IGTI |
2008 |
Three-Dimensional CFD Analysis of a Gas Turbine Combustor for Medium/Low Heating Value Syngas Fuel |
Yan Xiong, Lucheng Ji, Zhedian Zhang, Yue Wang, Yunhan Xiao |
GT2008-50662 |
|
| IGTI |
2008 |
Experimental Study of Advanced Convective Cooling Techniques for Combustor Liners |
Michael Maurer, Uwe Ruedel, Michael Gritsch; Jens von Wolfersdorf |
GT2008-51026 |
|
| IGTI |
2008 |
Evaluation of Weighted Sum of Grey Gases Coefficients for Combustion Gases Using Predicted Emissivities From High Resolution Spectroscopic Databases |
Mehdi Bahador; Bengt Sunden |
GT2008-51028 |
|
| IGTI |
2008 |
Characterization of Advanced Combustor Cooling Concepts Under Realistic Operating Conditions |
Thomas Behrendt; Miklos Gerendas; Timea Lengyel, Christoph Hassa |
GT2008-51191 |
|
| IGTI |
2008 |
Gas-Side Heat Transfer in Syngas, Hydrogen-Fired and Oxy-Fuel Turbines |
Danny W. Mazzotta, Ventzislav G. Karaivanov, William S. Slaughter, Minking K. Chyu; Mary Anne Alvin |
GT2008-51474 |
|
| IGTI |
2008 |
Gas Turbine Plant Thermal Performance Degradation Assessment |
Alexander V. Mirzamoghadam |
GT2008-50032 |
|
| IGTI |
2008 |
Density Wave Oscillation in a Vertical Type Natural Circulation Heat Recovery Steam Generator: A Numerical Study |
Heimo Walter, Wladimir Linzer |
GT2008-50035 |
|
| IGTI |
2008 |
Siemens SGT-800 Industrial Gas Turbine Enhanced to 47MW: Design Modifications and Operating Experience |
Sergey Shukin, Mats Bjorkman, Mats Annerfeldt |
GT2008-50087 |
|
| IGTI |
2008 |
Efforts to Improved Aerodynamics of the Large Cooling Tower Fan by Modification of the Fan Stack |
Steve Ingistov |
GT2008-50223 |
|
| IGTI |
2008 |
Development and Testing of the Upgraded High Pressure Turbine Section for an Industrial Gas Turbine |
U. Orth, E. Aschenbruck, D. Frank, T. Korte, R. Muller |
GT2008-50304 |
|
| IGTI |
2008 |
Static and Dynamic Analysis of 2.5 MW Power Generation Gas Turbine Unit |
Soo Yong Kim, Seung Joo Choe; Valeri P. Kovalevsky; Dong Hwa Kim |
GT2008-50314 |
|
| IGTI |
2008 |
Overspray and Interstage Fog Cooling in Compressor Using Stage-Stacking Scheme: Part 1 -- Development of Theory and Algorithm |
Ting Wang, Jobaidur R. Khan |
GT2008-50322 |
|
| IGTI |
2008 |
Overspray and Interstage Fog Cooling in Compressor Using Stage-Stacking Scheme: Part 2 -- Case Study |
Ting Wang, Jobaidur R. Khan |
GT2008-50323 |
|
| IGTI |
2008 |
Effect of Different Economic Support Policies on the Optimal Definition and Operation of a CHP and RES Distributed Generation Systems |
Mauro Reini; Melchiorre Casisi; Lorenzo Castelli; Piero Pinamonti |
GT2008-50353 |
|
| IGTI |
2008 |
A Compressible Flow Network Analysis for Design Upgrade of Industrial Aeroderivative High Pressure Turbine Blades |
H. Jin, A. Riddle, L. Cooke |
GT2008-50431 |
|
| IGTI |
2008 |
Implementation and Operation of a Cogeneration Plant for Steam Injection in Oil Field |
Mihai Borzea, Gheorghe Fetea, Radu Codoban |
GT2008-50518 |
|
| IGTI |
2008 |
Property Risk Assessment for Combined Cycle Power Plants |
G. J. Orme; M. Venturini |
GT2008-50586 |
|
| IGTI |
2008 |
Proposal of a Novel Multi-Functional Energy System for Cogeneration of Coke, Hydrogen and Power |
Hongguang Jin, Shien Sun, Wei Han, Lin Gao |
GT2008-50676 |
|
| IGTI |
2008 |
Off Design Operation of the Multi-Fuel CHP Cycles |
Wojciech Kosman |
GT2008-50746 |
|
| IGTI |
2008 |
Influence of Compressor Performance Maps Shape on Wet Compression |
Francesco Melino, Michele Bianchi, Antonio Peretto; Pier Ruggero Spina; Rakesh K. Bhargava |
GT2008-50761 |
|
| IGTI |
2008 |
Simulation of Inlet Fogging and Wet-Compression in a Single Stage Compressor Including Erosion Analysis |
Jobaidur R. Khan, Ting Wang |
GT2008-50874 |
|
| IGTI |
2008 |
Inlet Air Cooling With Overspray Applied to a Two-Stage Centrifugal Compressor |
Takanori Shibata, Yasuo Takahashi, Shigeo Hatamiya |
GT2008-50893 |
|
| IGTI |
2008 |
The Effects of Wet Compression on the Separated Flow in a Compressor Stage |
Lanxin Sun, Yijin Li, Qun Zheng; Rakesh Bhargava |
GT2008-50920 |
|
| IGTI |
2008 |
Experimental Investigation of a Single Stage Helium Axial Compressor of HTGR-10 Power Conversion Unit |
Rongkai Zhu, Qun Zheng; Jiguo Zou; Rakesh Bhargava |
GT2008-50921 |
|
| IGTI |
2008 |
Researches of Similitude Theory for Axial Flow Helium Compressor |
Rongkai Zhu, Qun Zheng, Guoqiang Yue; Jiguo Zou |
GT2008-50937 |
|
| IGTI |
2008 |
Numerical Simulation to Determine Ejection Device Geometry for Turbo-Shaft Driven Water Pump |
Jeni A. Popescu, Romulus Petcu, Valeriu A. Vilag, Ion Vataman, Valentin Silivestru |
GT2008-50968 |
|
| IGTI |
2008 |
Numerical Simulation of a Padded Finger Seal |
Guoqiang Yue, Qun Zheng, Rongkai Zhu |
GT2008-50997 |
|
| IGTI |
2008 |
GT Inlet Air Boosting and Cooling Coupled With Cold Thermal Storage in Combined Cycle Power Plants |
Nicola Palestra, Giovanna Barigozzi, Antonio Perdichizzi |
GT2008-51061 |
|
| IGTI |
2008 |
Continued Enhancement of SGT-600 Gas Turbine Design and Maintenance |
Vladimir Navrotsky, Mats Blomstedt, Niklas Lundin, Claes Uebel |
GT2008-51143 |
|
| IGTI |
2008 |
A Multi-Step Optimization Approach to Distributed Cogeneration Systems With Heat Storage |
Stefano Campanari, Giampaolo Manzolini, Paolo Silva |
GT2008-51227 |
|
| IGTI |
2008 |
High Efficiency Gas Turbine Based Power Cycles -- A Study of the Most Promising Solutions: Part 1 -- A Review of the Technology |
Rakesh K. Bhargava; Michele Bianchi; Stefano Campanari; Andrea De Pascale, Giorgio Negri di Montenegro, Antonio Peretto |
GT2008-51275 |
|
| IGTI |
2008 |
High Efficiency Gas Turbine Based Power Cycles -- A Study of the Most Promising Solutions: Part 2 -- A Parametric Performance Evaluation |
Rakesh K. Bhargava; Michele Bianchi; Stefano Campanari; Andrea De Pascale, Giorgio Negri di Montenegro, Antonio Peretto |
GT2008-51277 |
|
| IGTI |
2008 |
CFD Analysis of the Flow Through Tube Banks of HRSG |
Marco Torresi; Alessandro Saponaro; Sergio Mario Camporeale, Bernardo Fortunato |
GT2008-51300 |
|
| IGTI |
2008 |
Introduction of the Taurus(TM) 65 Industrial Gas Turbine for Power Generation |
Theresa Brown, Simon Reynolds, George Rocha |
GT2008-51328 |
|
| IGTI |
2008 |
Part-Load Performance of MCFC/APT Hybrid Power System |
Y. Tsujikawa, Ken-ichi Kaneko, T. Yamauchi; S. Katsura; S. Terashima |
GT2008-51444 |
|
| IGTI |
2008 |
Gas Turbine Power Augmentation: Parametric Study Relating to Fog Droplet Size and its Influence on Evaporative Efficiency |
Mustapha Chaker, Cyrus B. Meher-Homji |
GT2008-51476 |
|
| IGTI |
2008 |
Feasibility Study of Low Grade Heat Recovery Rankine Cycle Using Ozone-Neutral Refrigerant |
Asfaw Beyene, W. Wayne Husband |
GT2008-51537 |
|
| IGTI |
2008 |
Wide Gap Braze Repair Using Vertically Laminated Repair Scheme |
Doug Nagy; Xiao Huang |
GT2008-50046 |
|
| IGTI |
2008 |
Fast Epitaxial High Temperature Brazing of Single Crystalline Nickel Based Superalloys |
Britta Laux, Sebastian Piegert, Joachim Rosler |
GT2008-50055 |
|
| IGTI |
2008 |
On the Service Performance of Refurbished Turbine Blades in a Power Station |
H. M. Tawancy, Laui Al-Hadhrami |
GT2008-50057 |
|
| IGTI |
2008 |
Data Management and Adaptive Machining Technology for Efficient Repair and Manufacture of Turbine Components |
Claus Bremer |
GT2008-50060 |
|
| IGTI |
2008 |
Removing Tool Marks for Impellers in Five-Axis Machining With Improved Interference-Free Tool Paths |
Der-Min Tsay, Hsin-Pao Chen, Hsin-Hung Kuo |
GT2008-50205 |
|
| IGTI |
2008 |
Thermo Mechanical Fatigue Behaviour of Bare and Coated CMSX-4 |
T. Coppola; G. Pasquero; S. Riscifuli, O. Tassa |
GT2008-50433 |
|
| IGTI |
2008 |
Advanced Reconditioning Technologies for Turbine Blading at ALSTOM |
Ian Summerside, Rainer Kurtz, Richard van-der-Meij |
GT2008-50583 |
|
| IGTI |
2008 |
eXclean(R): A New Surface Preparation of Turbine Components for Deposition of MCrAlY Coatings With Super Clean Interface |
Dario Russo, Carlo Giolli, Andrea Scrivani, Gabriele Rizzi, Alessandro Lanzi |
GT2008-50685 |
|
| IGTI |
2008 |
Development, Characterization and Testing of MCrAlY HVOF Coating Used as Bond Coat for YPSZ Top Coat |
Carlo Giolli, Alessandro Lanzi, Gabriele Rizzi, Andrea Scrivani, Dario Russo, Marco Spagnoli |
GT2008-50688 |
|
| IGTI |
2008 |
Nano-Technology Coatings for Erosion Protection of Turbine Components |
V. P. Swami Swaminathan; Ronghua Wei; David W. Gandy |
GT2008-50713 |
|
| IGTI |
2008 |
Study on Metal Rubber Material's Characteristics of Damping and Sound Absorption |
Yanhong Ma, Haoyu Li, Hong Wang; Jie Hong |
GT2008-50961 |
|
| IGTI |
2008 |
EVITA Study: Evaluation of Unscheduled Aircraft and Industrial Gas Turbine Part Failure Cases |
Gerrit Kool; Jacques van den Elshout; Eric Vogelaar; Ron van Gestel; Andre Mom |
GT2008-50978 |
|
| IGTI |
2008 |
Acoustic Thermography Testing of Industrial Gas Turbine Blades in the Service Stage |
Mattias Broddegard; Christian Homma |
GT2008-51097 |
|
| IGTI |
2008 |
High Strength, Ductile Braze Repairs for Stationary Gas Turbine Components: Part 1 |
Warren Miglietti, Madeleine Du Toit |
GT2008-51133 |
|
| IGTI |
2008 |
Knowledge Based Prognostics Models for Gas Turbine Core Components |
Pontus Slottner, Mathias Warja |
GT2008-51276 |
|
| IGTI |
2008 |
Manufacturing Optimization for Bondcoat/Thermal Barrier Coating System |
Hans-Peter Bossmann, Sharath Bachegowda, Alexander Schnell |
GT2008-51366 |
|
| IGTI |
2008 |
Improving Component Life Prediction Accuracy and Reliability Through Physics Based Prognosis: A Probabilistic Turbine Blade Case Study |
Ashok K. Koul, Saurabh Bhanot, Ajay Tiku; Brent Junkin |
GT2008-51526 |
|
| IGTI |
2008 |
A Model of Nonlinear Fatigue-Creep (Dwell) Interactions |
Xijia Wu |
GT2008-51527 |
|
| IGTI |
2008 |
Advanced Multi-Functional Coatings for Land-Based Industrial Gas Turbines |
Ramesh Subramanian, Andrew Burns, Werner Stamm |
GT2008-51532 |
|
| IGTI |
2008 |
Advanced Weld Repair of Gas Turbine Hot Section Components |
Nikolai Arjakine, Birgit Gruger, Rolf Wilkenhoener, Jerry Bruck, Dirk M. Seeger |
GT2008-51534 |
|
| IGTI |
2008 |
Assessing of Hot Gas Parts Using Advanced Eddy Current Testing Methods |
Matthias Jungbluth; Vinay Jonnalagadda, Erwan Baleine, Paul Zombo; Rolf Wilkenhoner; Mattias Broddegard |
GT2008-51535 |
|
| IGTI |
2008 |
Hot Oxidation Studies for the Ti-6AL-4V Alloy at Environmental Atmosphere |
M. A. S. Oliveira, A. Boschetti; M. S. Vilela |
GT2008-51539 |
|
| IGTI |
2008 |
Economic Benefits of Hybrid Drive Propulsion for DDG-51 Class Ships |
Fred T. Willett, Greg Reed, Gene Castles |
GT2008-50053 |
|
| IGTI |
2008 |
Marine Gas Turbine Package for the Korean Navy PKX Program |
Glenn McAndrews; Naytoe Aye; Bob Mendenhall |
GT2008-50098 |
|
| IGTI |
2008 |
Unique Replacement Method Developed for the U.S. Navy's Newest Gas Turbine Powered Warship |
Abe L. Boughner, Matthew J. Driscoll, Shaun D. Hatcher |
GT2008-50114 |
|
| IGTI |
2008 |
Integrating MT30 Into the UK's Future Aircraft Carrier -- Power at the Heart of the Electric Propulsion System |
Roy Casson |
GT2008-50206 |
|
| IGTI |
2008 |
Analysis of Stall Precursors and Determination of Optimum Signal Processing Methods for an LM-2500 Gas Turbine |
Knox T. Millsaps, Jeffrey S. Patterson; Daniel E. Caguiat; Gustave C. Dahl |
GT2008-50575 |
|
| IGTI |
2008 |
LCAC Main Engine Installed Performance |
Benjamin Canilang, David Zipkin |
GT2008-50639 |
|
| IGTI |
2008 |
Air Cushion Vehicle Turbofan Propulsion Feasibility Analysis |
David Zipkin, Lance Shappell |
GT2008-50645 |
|
| IGTI |
2008 |
Gas Turbine Electric Start System (GT-ESS) Ship Integration |
Martin Quinones, Saurabh Deshmukh |
GT2008-50708 |
|
| IGTI |
2008 |
The Performance Evaluations of Variations of Diffuser Geometry of the Centrifugal Compressor in a Marine Engine (70MW) Turbocharger |
Hong-Won Kim, Jong-Il Park, Seung-Hyup Ryu, Sang-Hak Ghal, Seong-Wook Choi |
GT2008-50751 |
|
| IGTI |
2008 |
Marine Gas Turbine Propulsion System Controls: An Integrated Approach |
Joseph H. McMurry; Thomas B. Keefer; Lorenzo Previsani |
GT2008-50858 |
|
| IGTI |
2008 |
U.S. Navy Experience With SSS (Synchro-Self-Shifting) Clutches |
Morgan L. Hendry; B. Michael Zekas |
GT2008-51338 |
|
| IGTI |
2008 |
Shipboard Mission Readiness Assessment |
Thomas C. Cook, Scott G. Valentine |
GT2008-51373 |
|
| IGTI |
2008 |
CBM Integrated Maintenance Scheduler |
Simon Jessop, Scott Valentine, Michael Roemer |
GT2008-51375 |
|
| IGTI |
2008 |
Long-Term Microturbine Exposure of an Advanced Alloy for Microturbine Primary Surface Recuperators |
Wendy J. Matthews; Karren L. More, Larry R. Walker |
GT2008-50037 |
|
| IGTI |
2008 |
Compliant Foil Journal Bearing Performance at Alternate Pressures and Temperatures |
Robert J. Bruckner, Benadette J. Puleo |
GT2008-50174 |
|
| IGTI |
2008 |
Evaluation of a Micro Gas Turbine Fed by Blends of Biomass Producer Gas and Natural Gas |
Matteo Prussi, Giovanni Riccio, David Chiaramonti, Francesco Martelli |
GT2008-50236 |
|
| IGTI |
2008 |
Partload Fuel Economy Characteristics of 300kW Class Gas Turbines |
Colin Rodgers; Aubrey Stone |
GT2008-50282 |
|
| IGTI |
2008 |
High Altitude Recuperated 50 kWe Turboprop Study |
Colin Rodgers |
GT2008-50369 |
|
| IGTI |
2008 |
Design, Fabrication, and Performance of Foil Gas Thrust Bearings for Microturbomachinery Applications |
Brian Dykas; Robert Bruckner, Christopher DellaCorte, Brian Edmonds; Joseph Prahl |
GT2008-50377 |
|
| IGTI |
2008 |
Hybrid Gas Bearings With Controlled Supply Pressure to Eliminate Rotor Vibrations While Crossing System Critical Speeds |
Luis San Andees, Keun Ryu |
GT2008-50393 |
|
| IGTI |
2008 |
Development and Testing of a 10 kW Diffusive Micromix Combustor for Hydrogen-Fuelled [micro]-Scale Gas Turbines |
A. E. Robinson, H. H.-W. Funke, Uwe Ronna |
GT2008-50418 |
|
| IGTI |
2008 |
Preliminary Design and Projected Performance for Intercooled-Recuperated Microturbine |
Thomas L. Wolf, James B. Kesseli, James S. Nash |
GT2008-50527 |
|
| IGTI |
2008 |
Characterization of Foil Bearing Structure for Increasing Shaft Temperatures: Part I -- Static Load Performance |
Tae Ho Kim; Anthony W. Breedlove; Luis San Andres |
GT2008-50567 |
|
| IGTI |
2008 |
Design and Performance Evaluation of a Trigeneration System Incorporating Hydraulic Storage and an Inverted Brayton Cycle |
Matthew Blieske, J. E. D. Gauthier, X. Huang |
GT2008-50568 |
|
| IGTI |
2008 |
Characterization of Foil Bearing Structure for Increasing Shaft Temperatures: Part II -- Dynamic Force Performance |
Tae Ho Kim; Anthony W. Breedlove; Luis San Andres |
GT2008-50570 |
|
| IGTI |
2008 |
Losses in High-Speed Permanent Magnet Machines Used in Microturbine Applications |
Co Huynh, Liping Zheng, Dipjyoti Acharya |
GT2008-50715 |
|
| IGTI |
2008 |
Axial Load Control on High-Speed Turbochargers. Test and Prediction |
Kostandin Gjika, Gerald D. LaRue |
GT2008-50756 |
|
| IGTI |
2008 |
Optimizing the Swiss-Roll Recuperator of an Innovative Micro Gas Turbine by a Surrogate Neural Network and the Multi-Objective DIRECT Algorithm |
Yau-Zen Chang, Hsin-Yi Shih, Kao-Ting Hung |
GT2008-50762 |
|
| IGTI |
2008 |
An Analytical Approach to Support High Cycle Fatigue Validation for Turbocharger Turbine Stages |
Tom Heuer, Marc Gugau; Paul Anschel; Achim Klein |
GT2008-50764 |
|
| IGTI |
2008 |
Recovery of Automobile Engine Exhaust Energy |
Willem Jansen, Arnold M. Heitmann; Masanori Hanawa |
GT2008-50801 |
|
| IGTI |
2008 |
Misalignment in Gas Foil Journal Bearings: An Experimental Study |
Samuel A. Howard |
GT2008-50806 |
|
| IGTI |
2008 |
Investigation of the Flow in Centrifugal Compressor Volute |
R. S. Amano, C. Xu |
GT2008-50936 |
|
| IGTI |
2008 |
Design Procedure of a Novel Micro-Turbine Low NOx Conical Wire-Mesh Duct Burner |
Omar B. Ramadan, J. E. Donald Gauthier; Patrick M. Hughes, Robert Brandon |
GT2008-50948 |
|
| IGTI |
2008 |
Turbocharger Performance Maps Building Using a Hot Gas Test Stand |
Giuliano Gardolinski Venson, Jose Eduardo Mautone Barros |
GT2008-50994 |
|
| IGTI |
2008 |
Micro Combined Plant With Gas Turbine and Organic Cycle |
Gabriele Comodi, Flavio Caresana, Leonardo Pelagalli, Sandro Vagni |
GT2008-51103 |
|
| IGTI |
2008 |
Thermodynanic Analysis of a Combined Micro Turbine With a Micro ORC |
Mortaza Yari |
GT2008-51163 |
|
| IGTI |
2008 |
Prototype Design of a Two-Stage High-Speed Motor Driven Air Compressor |
Jari L. H. Backman; Juha Saari; Teemu Turunen-Saaresti |
GT2008-51233 |
|
| IGTI |
2008 |
Optimal Design of a Heat Exchanger for an Externally-Fired Microturbine in Combined Heat and Power Generation |
Juha Kaikko, Lasse Koskelainen, Jari L. H. Backman, Jaakko Larjola |
GT2008-51244 |
|
| IGTI |
2008 |
Environmental Degradation of Heat-Resistant Alloys During Exposure to Simulated and Actual Gas Turbine Recuperator Environments |
James M. Rakowski, Charles P. Stinner; J. Preston Montague, Mark Lipschutz |
GT2008-51336 |
|
| IGTI |
2008 |
Conceptual Design of a Multistage High-Speed Motor Driven Air Compressor |
Juha Saari; Jari L. H. Backman; Jouko Peussa |
GT2008-51353 |
|
| IGTI |
2008 |
Wave Rotor Design Procedure for Gas Turbine Enhancement |
Ludek Pohorelsky; Pranav Sane, Norbert Muller; Tomas Rozsas |
GT2008-51354 |
|
| IGTI |
2008 |
Comparison of Microturbines and Reciprocating Engine Generator Sets |
Stephen Gillette |
GT2008-51365 |
|
| IGTI |
2008 |
Fischer-Tropsch Fuel Characterization via Microturbine Testing and Fundamental Combustion Measurements |
A. Srinivasan, B. Ellis, J. F. Crittenden, W. E. Lear; Brandon Rotavera, Eric L. Petersen |
GT2008-51447 |
|
| IGTI |
2008 |
System Design of a Novel Combined Cooling, Heat, Power, and Water Microturbine Combined Cycle |
William E. Lear, Choon Jae Ryu, John F. Crittenden, Adithya Srinivasan, William Ellis, David R. Tiffany, Sherif A. Sherif; Peter L. Meitner |
GT2008-51454 |
|
| IGTI |
2008 |
Experimental and Simulation Study of Biodiesel Combustion in a Microturbine |
Ee Sann Tan, Kumaran Palanisamy |
GT2008-51497 |
|
| IGTI |
2008 |
Creep Analysis of Cross Wavy Primary Surface Recuperator for Microturbine System |
Q. W. Wang, D. J. Zhang, M. Zeng, J. W. Wang |
GT2008-51505 |
|
| IGTI |
2008 |
Three-Dimensional Stress Analysis and Configuration Optimization of Cross Wavy Primary Surface Recuperator for Microturbine System |
Q. W. Wang, D. J. Zhang, M. Zeng |
GT2008-51506 |
|
| IGTI |
2008 |
Design, Development and Test of a 30kW Oil Free, Turbo Alternator |
James F. Walton, Hooshang Heshmat, Michael J. Tomaszewski |
GT2008-51514 |
|
| IGTI |
2008 |
Cycle Selection and Compressor Design of 600kW Simple Cycle Gas Turbine Engine |
Marco A. R. Nascimento, Osvaldo Jose Venturini, Electo S. Lora, Guido A. Sierra, Lucilene O. Rodrigues, Hilario M. Carvalho; Newton R. Moura |
GT2008-51523 |
|
| IGTI |
2008 |
Degradation Effects on Industrial Gas Turbines |
Rainer Kurz; Klaus Brun; Meron Wollie |
GT2008-50020 |
|
| IGTI |
2008 |
Influence of Blade Deterioration on Compressor and Turbine Performance |
M. Morini, M. Pinelli, P. R. Spina, M. Venturini |
GT2008-50043 |
|
| IGTI |
2008 |
API 617's Requirements on Centrifugal Compressors: A Purchaser's Viewpoint |
Mahdi Taherimoghaddam |
GT2008-50138 |
|
| IGTI |
2008 |
The Demonstration and Efficacy of the 1 Meter Sound Level Criteria for Gas Turbines in Offshore Installations |
Jeff Lotton |
GT2008-50148 |
|
| IGTI |
2008 |
PGT25+Gas Turbine Development: Validation and Operating Experience |
Roger De Meo, Michele D'Ercole, Alessandro Russo, Francesco Gamberi, Francesco Gravame; David Mucz |
GT2008-50159 |
|
| IGTI |
2008 |
The Development of Centrifugal Compressor Impeller |
C. Xu, R. S. Amano |
GT2008-50200 |
|
| IGTI |
2008 |
Impact of Continuous Inlet Fogging and Overspray Operation on GE 5002 Gas Turbine Life and Performance |
Klaus Brun; Luis Eduardo Gonzalez; John P. Platt |
GT2008-50207 |
|
| IGTI |
2008 |
Clearance Reduction and Performance Gain Using Abradable Material in Gas Turbines |
Iacopo Giovannetti, Manuele Bigi, Massimo Giannozzi, Marco Romanelli; Dieter R. Sporer; Filippo Cappuccini |
GT2008-50290 |
|
| IGTI |
2008 |
Development of a Guideline for the Design of Surge Control Systems |
Marybeth G. Nored, Klaus Brun; Rainer Kurz |
GT2008-50380 |
|
| IGTI |
2008 |
An Experimental Investigation of Airfoil Performance in Wet Gas Flow |
Trond G. Gruner, Lars E. Bakken; Lars Brenne, Tor Bjorge |
GT2008-50483 |
|
| IGTI |
2008 |
Analysis of the Effects of Pulsations on the Operational Stability of Centrifugal Compressors in Mixed Reciprocating and Centrifugal Compressor Stations |
Klaus Brun; Rainer Kurz |
GT2008-50540 |
|
| IGTI |
2008 |
Time-Frequency Analysis of Transient Vibrations to Improve Turbo-Compressor Start-Up |
Juan C. Jauregui, Oscar Gonzalez, Eduardo Rubio |
GT2008-50572 |
|
| IGTI |
2008 |
An Advanced Optimization Procedure for the Thermodynamic Selection of Centrifugal Compressors Stages |
Simone Pazzi, Marco Giachi, Massimo Pusceddu, Nidal Ghizawi; Ashraf Al Musleh |
GT2008-50702 |
|
| IGTI |
2008 |
Measurement Error Influence on Gas Turbine Operability for Condition-Based Maintenance and Reliability/Availability Improvement |
Ilaria Michelizzi, Ever Avriel Fadlun, Marco De Iaco |
GT2008-50749 |
|
| IGTI |
2008 |
Aeroderivative Gas Turbines for LNG Liquefaction Plants: Part 1 -- The Importance of Thermal Efficiency |
Cyrus Meher-Homji, Dave Messersmith, Tim Hattenbach; Jim Rockwell, Hans Weyermann, Karl Masani |
GT2008-50839 |
|
| IGTI |
2008 |
Aeroderivative Gas Turbines for LNG Liquefaction Plants: Part 2 -- World's First Application and Operating Experience |
Cyrus Meher-Homji, Dave Messersmith, Tim Hattenbach; Jim Rockwell, Hans Weyermann, Karl Masani |
GT2008-50840 |
|
| IGTI |
2008 |
Novel Concepts for the Compression of Large Volumes of Carbon Dioxide |
J. Jeff Moore, Marybeth G. Nored |
GT2008-50924 |
|
| IGTI |
2008 |
Remaining Life Assessment of Power Turbine Disks |
H. Jin, P. Lowden, R. Pistor |
GT2008-51010 |
|
| IGTI |
2008 |
Wet Gas Performance of a Single Stage Centrifugal Compressor |
Oyvind Hundseid, Lars E. Bakken, Trond G. Gruner; Lars Brenne, Tor Bjorge |
GT2008-51156 |
|
| IGTI |
2008 |
Prospects for Sub Sea Wet Gas Compression |
Lars Brenne, Tor Bjorge; Lars E. Bakken, Oyvind Hundseid |
GT2008-51158 |
|
| IGTI |
2008 |
Dynamic Analysis of Compressor Trips in the Snohvit LNG Refrigerant Circuits |
Ingrid Schjolberg; Gunleiv Skofteland; Morten Hyllseth; Havard Nordhus |
GT2008-51235 |
|
| IGTI |
2008 |
Compressor Casing Preliminary Design Based on Features |
Stefan Bretschneider, Frank Rothe, Martin G. Rose, Stephan Staudacher |
GT2008-50102 |
|
| IGTI |
2008 |
Simulation and Optimization of an Adjustable Inlet Guide Vane for Industrial Turbo Compressors |
Michael Hensges |
GT2008-50242 |
|
| IGTI |
2008 |
Design of a New Experimental Rig for Thermal Cyclic Testing of Combustor Liner Tiles |
C. Mende; O. Liedtke; A. Schulz, H.-J. Bauer |
GT2008-50300 |
|
| IGTI |
2008 |
On the Numerical Prediction of Finite Length Squeeze Film Dampers Performance With Free Air Entrainment |
Tilmer H. Mendez, Marco A. Ciaccia, Jorge E. Torres, Sergio Diaz |
GT2008-50368 |
|
| IGTI |
2008 |
Experimental and Numerical Investigation of Fluid Dynamics of the Bounded and Unbounded Triangular Jets |
Reza Riahi, Farshid Bagheri, Bijan Farhanieh |
GT2008-50407 |
|
| IGTI |
2008 |
Error Evaluation in Metal Surface Temperature Prediction Due to Non-Simulation of the Effect of Water Impingement and Runback Water on an Anti-Iced Turboprop Engine Inlet Guide Vane Structure |
Javier Castillo, Gema Ortega |
GT2008-50578 |
|
| IGTI |
2008 |
The Analytical Approach to the Temperature Prediction of Steam Turbine Shells Based on the Thermocouple Temperature Measurements at a Few Points |
Ajit B. Ekbote; Howard M. Brilliant |
GT2008-50609 |
|
| IGTI |
2008 |
Topology-Optimized Intermediate Casing of Aero Engine and Comparative Evaluation of Titanium and Composite Architecture in Terms of Load Capacity and Weight Reduction |
Markus Kober, Thomas Klauke, Arnold Kuhhorn; Olaf Lenk |
GT2008-50644 |
|
| IGTI |
2008 |
An Analysis of the Motion of a Centrifugal Impeller in Overspeed Test |
Richard J. Gozdawa; Alfred W. Crook |
GT2008-50699 |
|
| IGTI |
2008 |
Distortion Compensation by Shape Modification of Complex Turbine Geometries in the Presence of High Temperature Gradients |
John McElhaney |
GT2008-50757 |
|
| IGTI |
2008 |
Investigation of Multi-Material Bird Models for Predicting Impact Loads |
Lakshmi S. Nizampatnam; Walter J. Horn |
GT2008-51005 |
|
| IGTI |
2008 |
Design Optimization and Validation of a Power Turbine Blade for an Aero-Derivative Gas Turbine Upgrade |
Paolo Del Turco, Michele D'Ercole, Nicola Pieroni, Massimiliano Mariotti, Francesco Gamberi, William Zemitis |
GT2008-51064 |
|
| IGTI |
2008 |
An Acoustic Modal Analysis of a DLE Combustion System |
Lingli Yu, Mick Cashmore |
GT2008-51075 |
|
| IGTI |
2008 |
Axial-Transverse Coupled Vibration Analysis of a Swinging Roller-Follower CAM Due to Flexible Follower Rod |
J. R. Chang, M. C. Huang |
GT2008-51082 |
|
| IGTI |
2008 |
Experimental Evaluation of Abradable Seal Performance at High Temperature |
A. Dadouche, M. J. Conlon; W. Dmochowski; B. Liko, J.-P. Bedard |
GT2008-51228 |
|
| IGTI |
2008 |
Lifing of Turbomachinery Blades: A Process Driven Approach |
J. S. Rao, R. Narayan, M. C. Ranjith |
GT2008-50231 |
|
| IGTI |
2008 |
Methods of Extrapolating Low Cycle Fatigue Data to High Stress Amplitudes |
David Radonovich; Ali P. Gordon |
GT2008-50365 |
|
| IGTI |
2008 |
Simulated Foreign Object Damage on Blades Aerofoils: Real Damage Investigation |
Pierangelo Duo, Christian Pianka, Andrej Golowin; Matthias Fueller, Roger Schaefer, Ulf Bernhardt |
GT2008-50371 |
|
| IGTI |
2008 |
CFD and Thermo-Mechanical Analysis for Heat Exchanger Used in Aero Engine |
Ho Seung Jeong, Jong Rae Cho, Lae Sung Kim, Man Yeong Ha, Ji Hwan Jeong, Kui Soon Kim; Torbjorn Lindquist, Philip P. Walsh |
GT2008-50447 |
|
| IGTI |
2008 |
3D Crack Growth Analysis and its Correlation With Experiments for Critical Turbine Components Under an International Collaborative Program |
J. Hou; J. Dubke; K. Barlow; S. Slater; W. Beres; L. Harris; S. Calcuttawala |
GT2008-50548 |
|
| IGTI |
2008 |
A Viscoplastic Modeling Approach for MCrAIY Protective Coatings for Gas Turbine Applications |
Roland Mucke |
GT2008-50579 |
|
| IGTI |
2008 |
Critical Components Life Update for Gas Turbine Engines: Case Study of an International Collaboration |
Wieslaw Beres; Donald Fread; Lesley Harris, Philip Haupt; Joanna Kappas; Roger Olson; Philip Reineke; Sansi Robertson; Gordon Stocks |
GT2008-50655 |
|
| IGTI |
2008 |
A New Energy-Based Multiaxial Fatigue Life Prediction Procedure |
Wasim Tarar, Onome Scott-Emuakpor, M.-H. Herman Shen; Tommy George, Charles Cross |
GT2008-51170 |
|
| IGTI |
2008 |
Three Dimensional Modeling of Creep Damage in Airfoils for Advanced Turbine Systems |
Ventzislav G. Karaivanov, Danny W. Mazzotta, William S. Slaughter, Minking K. Chyu; Mary Anne Alvin |
GT2008-51278 |
|
| IGTI |
2008 |
Applicability of Neuber's Rule for Thermomechanical Fatigue |
Ali P. Gordon, Eric P. Williams, Michael Schulist |
GT2008-51358 |
|
| IGTI |
2008 |
Foreign Object Damage and Fatigue Strength Loss in Compressor Blades |
Mickhael S. Nikhamkin, Leonid V. Voronov, Irina V. Semenova |
GT2008-51493 |
|
| IGTI |
2008 |
High Temperature Radiation Heat Transfer Performance of Thermal Barrier Coatings With Multiple Layered Structure |
Xiao Huang |
GT2008-50047 |
|
| IGTI |
2008 |
Development and Testing of High Temperature Silicon Nitride Microturbine Rotors |
Vimal Pujari, Ara Vartabedian, Gregg Wayman |
GT2008-50108 |
|
| IGTI |
2008 |
Damage Evolution and Failure Mechanisms for APS-TBCS |
Filippo Cappuccini, Iacopo Giovannetti; Suchismita Sanyal; Massimo Giannozzi; Santosh Kumar, T. Shalini, T. Vishwanath |
GT2008-50367 |
|
| IGTI |
2008 |
Foreign Object Damage in an Oxide/Oxide Composite at Ambient Temperature |
Sung R. Choi, Donald J. Alexander, Robert W. Kowalik |
GT2008-50505 |
|
| IGTI |
2008 |
Novel Shrinkage-Free Structural Ceramic Materials for Gas Turbine Applications |
A. V. Sudarev; V. G. Konalkov, N. F. Morozov; I. A. Ovidko; B. N. Semenov |
GT2008-50549 |
|
| IGTI |
2008 |
Advanced TBC Systems by Vapor Deposition Using LPPS Thin Film |
K. von Niessen, A. Refke, G. Eschendorff, M. Gindrat |
GT2008-51090 |
|
| IGTI |
2008 |
Sensor TBCs: Remote In-Situ Condition Monitoring of EB-PVD Coatings at Elevated Temperatures |
Remy J. L. Steenbakker; Jorg P. Feist; John R. Nicholls, Richard G. Wellman |
GT2008-51192 |
|
| IGTI |
2008 |
Ceramic Gas Turbine Development: Need for a 10-Year Plan |
Mark Va Rroode |
GT2008-51378 |
|
| IGTI |
2008 |
25,000-Hour Hybrid Oxide CMC Field Test Summary |
Mark Van Roode, Jeff Price, Joel Otsuka; Andy Szweda; Karren More; Jiangang Sun |
GT2008-51379 |
|
| IGTI |
2008 |
Effect of Time and Temperature on TBC Failure Mode Under Oxidizing Environment |
N. S. Cheruvu, K. S. Chan; D. W. Gandy |
GT2008-51528 |
|
| IGTI |
2008 |
The Role of Structural Damping in Aeroderivative Engine Structure Modeling |
Jing Yuan; Agnieszka Muszynska; Kenneth Heyden |
GT2008-50081 |
|
| IGTI |
2008 |
Casing Treatment and Blade Tip Configuration Effects on Controlled Gas Turbine Blade Tip/Shroud Rubs at Engine Conditions |
Corso Padova, Michael G. Dunn, Jeffery Barton; Kevin Turner, Alan Turner, Darin DiTommaso |
GT2008-50112 |
|
| IGTI |
2008 |
Mistuning Analyses of a Bladed Disk: Pole-Zero and Modal Approaches |
Alok Sinha |
GT2008-50191 |
|
| IGTI |
2008 |
Dynamic Characteristics of Composite Helicopter Blade Solved by Using the Differential Quadrature Method |
J. H. Kuang; M. H. Hsu; T. P. Hung |
GT2008-50193 |
|
| IGTI |
2008 |
Turbine Clashing Transient Analysis: Impact of Rotor Disk Stage Onto Static Vane Stage After Shaft Rupture |
Carlo Frola, Antonino Vassallo; Marco Degiovanni, Massimiliano Mattone |
GT2008-50216 |
|
| IGTI |
2008 |
Friction Damping Modeling in High Stress Contact Areas Using Microslip Friction Model |
Armando Coro, Francisco J. Marquina, Roberto Alonso, Alberto Gutierrez; David J. Ewins, Giovanna Girini |
GT2008-50359 |
|
| IGTI |
2008 |
Experimental Study on Impeller Blade Vibration During Resonance: Part 1 -- Blade Vibration Due to Inlet Flow Distortion |
Albert Kammerer, Reza S. Abhari |
GT2008-50466 |
|
| IGTI |
2008 |
A Versatile Design of a Controlled Swirl Distrotion Generator for Testing Gas Turbine Engines |
Yogi Sheoran, Bruce Bouldin |
GT2008-50657 |
|
| IGTI |
2008 |
The Engine 3E Core Engine |
Holger Klinger, Waldemar Lazik, Thomas Wunderlich |
GT2008-50679 |
|
| IGTI |
2008 |
An Analytical Approach for Gas Turbine Parameter Corrections |
Vasileios E. Kyritsis, Pericles Pilidis |
GT2008-50716 |
|
| IGTI |
2008 |
Performance Comparison of More Electric Engine Configurations |
Antoon Pluijms; Borys Chibisov; Klaus-Juergen Schmidt, Karel Stastny |
GT2008-50758 |
|
| IGTI |
2008 |
Secondary Air System Component Modelling for Engine Performance Simulations |
A. Alexiou, K. Mathioudakis |
GT2008-50771 |
|
| IGTI |
2008 |
Optimal Mission Analysis Accounting for Engine Aging and Emissions |
M. Kelaidis, N. Aretakis, A. Tsalavoutas, K. Mathioudakis |
GT2008-50800 |
|
| IGTI |
2008 |
Turbo Fans With Very High Bypass Ratio but Acceptable Dimensions |
Uwe L. H. Schmidt-Eisenlohr; Oliver E. Kosing |
GT2008-50817 |
|
| IGTI |
2008 |
Derivation of Correlations for Small Turbojet Engines |
J. E. Donald Gauthier; Robert Stowe |
GT2008-51001 |
|
| IGTI |
2008 |
Generation of a Quasi 3-D Map of a Half-Embedded Ultra High Bypass Ratio Turbofan Intake on the Wing of a Broad Delta Wing Airframe |
S. Rousselot, D. Truffi, G. Doulgeris, S. Mistry, V. Pachidis, P. Pilidis |
GT2008-51008 |
|
| IGTI |
2008 |
Advanced Modeling of Fluid Thermodynamic Properties for Gas Turbine Performance Simulation |
Vishal Sethi, Fulvio Diara, Sina Atabak, Arjun Bala, Anthony Jackson, Pericles Pilidis |
GT2008-51126 |
|
| IGTI |
2008 |
Multi-Stage Compressor Model for Transient Performance Simulations |
Holger Schulte; Arne Weckend; Klaus-Jurgen Schmidt; Stephan Staudacher |
GT2008-51159 |
|
| IGTI |
2008 |
Parametric Analysis of Variable Nacelle Nozzle Throat Area Using Warped Chevrons |
B. Sloan, S. Spence, J. Wang, S. Raghunathan |
GT2008-51265 |
|
| IGTI |
2008 |
Inverse Modeling Techniques for Application to Engine Transient Performance Data Matching |
Harish Agarwal, Amit Kale, Srikanth Akkaram, Mahadevan Balasubramaniam; Susan Ebacher, Paul Gilleberto |
GT2008-51313 |
|
| IGTI |
2008 |
Design, Development and Testing of an In-Engine Radial Traverse System for the Trent Engine |
S. J. Anderson; A. J. W. Wilson; K. S. Chaha |
GT2008-51332 |
|
| IGTI |
2008 |
Reynolds Stress Calculations for Pre-Transition Boundary Layers With Turbulent Free Streams |
R. E. Mayle, A. Schulz, H.-J. Bauer |
GT2008-50109 |
|
| IGTI |
2008 |
Evolution of the Laminar Boundary Layer Over a Flat Plate Under a Free Stream Turbulence Intensity of 1.3% |
E. J. Walsh, F. Brighenti; D. M. McEligot |
GT2008-50409 |
|
| IGTI |
2008 |
Extended Models for Transitional Rough Wall Boundary Layers With Heat Transfer: Part I -- Model Formulations |
M. Stripf, A. Schulz, H.-J. Bauer, S. Wittig |
GT2008-50494 |
|
| IGTI |
2008 |
Extended Models for Transitional Rough Wall Boundary Layers With Heat Transfer: Part II -- Model Validation and Benchmarking |
M. Stripf, A. Schulz, H.-J. Bauer, S. Wittig |
GT2008-50495 |
|
| IGTI |
2008 |
Transition Prediction on Turbine Blade Profile With Intermittency Transport Equation |
Wladyslaw Piotrowski; Witold Elsner; Stanislaw Drobniak |
GT2008-50796 |
|
| IGTI |
2008 |
Prediction of Heat Transfer and Flow Transition on Transonic Turbine Airfoils Under High Freestream Turbulence |
Jiang Luo, Eli H. Razinsky |
GT2008-50868 |
|
| IGTI |
2008 |
Numerical Investigation on the Second Stator Boundary Layer Under Clocking Effects: Comparison of V2-f and LCL-Model |
Axel Heidecke, Bernd Stoffel |
GT2008-50955 |
|
| IGTI |
2008 |
Instability and Transition in a Separation Bubble Under a Three-Dimensional Freestream Pressure Distribution |
M. I. Yaras |
GT2008-51256 |
|
| IGTI |
2008 |
Heat Transfer Augmentation Downstream of Rows of Various Dimple Geometries on the Suction Side of a Gas Turbine Airfoil |
Jason E. Dees, David G. Bogard; Ronald S. Bunker |
GT2008-51269 |
|
| IGTI |
2008 |
Simplified Approach to Predicting Rough Surface Transition |
R. J. Boyle; M. Stripf |
GT2008-51543 |
|
| IGTI |
2008 |
Secondary Air System Model for Integrated Thermomechanical Analysis of a Jet Engine |
Yannick Muller |
GT2008-50078 |
|
| IGTI |
2008 |
Analytical and Numerical Simulation of the Two Phase Flow Heat Transfer in the Vent and Scavenge Pipes of the Clean Engine Demonstrator |
Michael Flouros |
GT2008-50130 |
|
| IGTI |
2008 |
Breaking the Swirl With Brush Seals: Numerical Modeling and Experimental Evidence |
Peter Helm, Alexander Pugachev; Matthias Neef |
GT2008-50257 |
|
| IGTI |
2008 |
Effect of Radial Location of Nozzles on Performance of Pre-Swirl Systems |
Paul Lewis, Mike Wilson, Gary Lock, J. Michael Owen |
GT2008-50295 |
|
| IGTI |
2008 |
Investigations on the Discharge and Total Temperature Increase Characteristics in the Labyrinth Seals With Honeycomb and Smooth Lands |
Xin Yan, Jun Li, Liming Song, Zhenping Feng |
GT2008-50399 |
|
| IGTI |
2008 |
Windage Power Losses From Spiral Bevel Gears With Varying Oil Flows and Shroud Configurations |
Graham Johnson, Budi Chandra, Colin Foord, Kathy Simmons |
GT2008-50424 |
|
| IGTI |
2008 |
Application of an Enhanced 1D Network Model to Calculate the Flow Properties of a Pre-Swirl Secondary Air System |
F.-K. Benra, H. J. Dohmen; O. Schneider |
GT2008-50442 |
|
| IGTI |
2008 |
Basic Architecture and Sizing of Commercial Aircraft Gas Turbine Oil Feed Systems |
Ken Hart |
GT2008-50450 |
|
| IGTI |
2008 |
3D CFD Ingestion Evaluation of a High Pressure Turbine Rim Seal Disk Cavity |
A. V. MirzaMoghadam, G. Heitland, M. C. Morris, J. Smoke, M. Malak, J. Howe |
GT2008-50531 |
|
| IGTI |
2008 |
Measurements of Leakage and Power Loss in a Hybrid Brush Seal |
Luis San Andres, Jose Baker, Adolfo Delgado |
GT2008-50532 |
|
| IGTI |
2008 |
Experimental Investigations of Film Flows Around Obstacles |
Johannes Kneer; Carol Eastwick, Adam Robinson; Armin Muller; Graham Johnson; Hans-Jorg Bauer |
GT2008-50630 |
|
| IGTI |
2008 |
Experimental Investigation Into the Behaviour Within Flush Offtake Pipes |
Helge Dagefoerde, Carol Eastwick, Adam Robinson, Graham Johnson; Sinisa Kontin, Hans-Jorg Bauer |
GT2008-50632 |
|
| IGTI |
2008 |
Effect of Variations in Shroud Geometry on Single Phase Flow Over a Shrouded Single Spiral Gear |
Steve Rapley, Carol Eastwick, Kathy Simmons |
GT2008-50633 |
|
| IGTI |
2008 |
Computational Investigations Into Aero-Engine Bearing Chamber Off-Take Flows |
Adam Robinson, Herve Morvan, Carol Eastwick |
GT2008-50634 |
|
| IGTI |
2008 |
Efficient FEA/CFD Thermal Coupling for Engineering Applications |
Zixiang Sun, John W. Chew, Nicholas J. Hills, Konstantin N. Volkov; Christopher J. Barnes |
GT2008-50638 |
|
| IGTI |
2008 |
Assessment of Models for Liquid Jet Breakup |
Paul S. Hutcheson, John W. Chew, Rex B. Thorpe; Colin Young |
GT2008-50649 |
|
| IGTI |
2008 |
A Rim Seal Orifice Model With 2 Cd s and Effects of Swirl in Seal |
Bruce V. Johnson; Cheng-Zhang Wang; Ramendra Roy |
GT2008-50650 |
|
| IGTI |
2008 |
Simulation of Turbulent Flows in Turbine Blade Passages and Disc Cavities |
Konstantin N. Volkov, Nicholas J. Hills, John W. Chew |
GT2008-50672 |
|
| IGTI |
2008 |
Application of CFD to Assess the Performance of a Novel Pre-Swirl Configuration |
G. D. Snowsill, C. Young |
GT2008-50684 |
|
| IGTI |
2008 |
Experimental Analysis of Varied Vortex Reducer Configurations for the Internal Air System of Jet Engine Gas Turbines |
Andre Gunther, Wieland Uffrecht; Lothar Heller; Erwin Kaiser, Stephan Odenbach |
GT2008-50738 |
|
| IGTI |
2008 |
Numerical Simulation of TOBI Flow: Analysis of the Cavity Between Seal-Plate and HPT Disc With Pumping Vanes |
Anish Kumar Gupta; Douglas Ramerth; Dhinagaran Ramachandra |
GT2008-50739 |
|
| IGTI |
2008 |
Validation of CFD Predicted Discharge Coefficients for Thick Plate Orifices With Approach Flow Perpendicular and Inclined to the Orifice Axis |
Anish Kumar Gupta; Douglas Ramerth; Dhinagaran Ramachandra |
GT2008-50742 |
|
| IGTI |
2008 |
3D Thermo-Mechanical Modelling Method to Predict Compressor Local Tip Running Clearances |
Diego Benito, Jeff Dixon, Paul Metherell |
GT2008-50780 |
|
| IGTI |
2008 |
Comparison of Discharge Coefficient Measurements and Correlations for Several Orifice Designs With Cross-Flow and Rotation Around Several Axes |
M. Huning |
GT2008-50976 |
|
| IGTI |
2008 |
Low Leakage Designs for Rotor Teeth Honeycomb Lands in Labyrinth Seals |
Hasham H. Chougule; Douglas Ramerth; Dhinagaran Ramachandra |
GT2008-51024 |
|
| IGTI |
2008 |
Efficient Computational Model for Non-Axisymmetric Flow and Heat Transfer in Rotating Cavity |
L. He |
GT2008-51132 |
|
| IGTI |
2008 |
Improved Understanding of Blow-Down in Filament Seals |
Gervas Franceschini; Terry V. Jones, David R. H. Gillespie |
GT2008-51197 |
|
| IGTI |
2008 |
Unsteady Numerical Simulation of the Flow in a Direct Transfer Pre-Swirl System |
Fabio Ciampoli, Nicholas J. Hills, John W. Chew; Timothy Scanlon |
GT2008-51198 |
|
| IGTI |
2008 |
Experimental Characterisation of the Stiffness and Leakage of a Prototype Leaf Seal for Turbine Applications |
Ingo H. J. Jahn, Gervas Franceschini; Andrew K. Owen, David Gillespie |
GT2008-51206 |
|
| IGTI |
2008 |
Development of Numerical Tools for Stator-Rotor Cavities Calculation in Heavy-Duty Gas Turbines |
L. Innocenti, C. Bianchini, R. Da Soghe, B. Facchini, M. Micio; L. Bozzi, S. Traverso |
GT2008-51268 |
|
| IGTI |
2008 |
An Experimental Study on Droplet Generation in Bearing Chambers Caused by Roller Bearings |
P. Gorse, K. Dullenkopf, H.-J. Bauer, S. Wittig |
GT2008-51281 |
|
| IGTI |
2008 |
Conjugate Heat Transfer Study of a Spin Pit Rig: Application to the Lifing of HP Turbine Disc Firtrees |
S. Alizadeh, N. Gopinathrao, C. Mabilat; D. Jackson, R. Clarkson |
GT2008-51294 |
|
| IGTI |
2008 |
Conjugate Heat Transfer Study of a Biaxial Rig: Application to the Lifing of HP Turbine Disc Firtrees |
S. Alizadeh, C. Mabilat; D. Jackson, R. Clarson |
GT2008-51297 |
|
| IGTI |
2008 |
Interdependence of Discharge Behavior, Swirl Development and Total Temperature Increase in Rotating Labyrinth Seals |
J. Denecke, J. Farber, K. Dullenkopf, H.-J. Bauer |
GT2008-51429 |
|
| IGTI |
2008 |
Gas Turbine Temperature Prediction Using Unsteady CFD and Realistic Non-Uniform 2D Combustor Exit Properties |
Frederic N. Felten, Semir Kapetanovic, D. Graham Holmes, Michael Ostrowski |
GT2008-50275 |
|
| IGTI |
2008 |
Numerical Investigation on Unsteady Effects of Hot Streak on Flow and Heat Transfer in a Turbine Stage |
Bai Tao An, Jian-Jun Liu; Hong-De Jiang |
GT2008-50415 |
|
| IGTI |
2008 |
Experimental Study on Impeller Blade Vibration During Resonance: Part 2 -- Blade Damping |
Albert Kammerer, Reza S. Abhari |
GT2008-50467 |
|
| IGTI |
2008 |
A Forced Response Method for Annular Combustors Excited by Traveling Acoustic Pressure Waves |
Sanghum Baik; Mehmet Dede |
GT2008-50476 |
|
| IGTI |
2008 |
Method for Sensitivity Analysis of Resonance Forced Response of Bladed Discs With Nonlinear Contact Interfaces |
E. P. Petrov |
GT2008-50481 |
|
| IGTI |
2008 |
Reduction of Multi-Stage Disk Models: Application to an Industrial Rotor |
Arnaud Sternchuss, Etienne Balmes; Pierrick Jean, Jean-Pierre Lombard |
GT2008-50580 |
|
| IGTI |
2008 |
A Discrete Model to Consider the Influence of the Air Flow on Blade Vibrations of an Integral Blisk Compressor Rotor |
Bernd Beirow, Arnold Kuhhorn, Sven Schrape |
GT2008-50613 |
|
| IGTI |
2008 |
Design Tuning of High Aspect Ratio Shrouded Turbine Blades |
Andrey V. Pipopulo, Alexander N. Arkhipov, Igor V. Putchkov |
GT2008-50670 |
|
| IGTI |
2008 |
Blade Vibration Phenomena of HPC Bliscs Considering Manufacturing Effects and Strain Gauge Application |
T. Klauke, A. Kuhhorn, B. Beirow; R. Parchem |
GT2008-50683 |
|
| IGTI |
2008 |
Design and Testing of a Vibrating Test Object for Investigating Fluid-Structure Interaction |
Nikos Andrinopoulos, Damian Vogt; Jiasen Hu; Torsten H. Fransson |
GT2008-50740 |
|
| IGTI |
2008 |
Nonlinear Vibration Analysis of Gas Turbine Bladings With Shroud Coupling |
Andreas Hohl, Christian Siewert, Lars Panning; Andreas Kayser |
GT2008-50787 |
|
| IGTI |
2008 |
Asymptotic Description of Maximum Mistuning Amplification of Bladed Disk Forced Response |
Carlos Martel; Roque Corral |
GT2008-50822 |
|
| IGTI |
2008 |
Tip-Timing Data Analysis for Mistuned Bladed Discs Assemblies |
Cyrille Stephan, Marc Berthillier, Joseph Lardies; Arnaud Talon |
GT2008-50825 |
|
| IGTI |
2008 |
Non-Linear Modal Analysis for Bladed Disks With Friction Contact Interfaces |
Denis Laxalde, Loic Salles, Laurent Blanc, Fabrice Thouverez |
GT2008-50860 |
|
| IGTI |
2008 |
Experimental and Numerical Investigation of Friction Rings Damping of Blisks |
Denis Laxalde, Claude Gibert, Fabrice Thouverez |
GT2008-50862 |
|
| IGTI |
2008 |
Test-Model Correlation of Dry-Friction Damping Phenomena in Aero-Engines |
P. Jean; C. Gibert; C. Dupont, J.-P. Lombard |
GT2008-50891 |
|
| IGTI |
2008 |
On the Individual and Combined Effects of Intentional Mistuning, Coupling and Damping on the Forced Response of Bladed Disks |
Changbo Yu, Jianjun Wang, Qihan Li |
GT2008-50960 |
|
| IGTI |
2008 |
Forced Response of Shrouded Blades With Intermittent Dry Friction Force |
Weiwei Gu, Zili Xu, Lv Qiang |
GT2008-51041 |
|
| IGTI |
2008 |
Aeroelastic Properties of Closely Spaced Modes for a Highly Loaded Transonic Fan |
Hans Martensson; Stefan Sturla Gunnsteinsson, Damian M. Vogt |
GT2008-51046 |
|
| IGTI |
2008 |
Range of Variability in the Dynamics of Semi-Cylindrical Friction Dampers for Turbine Blades |
Stefano Zucca, Daniele Botto, Muzio M. Gola |
GT2008-51058 |
|
| IGTI |
2008 |
Numerical and Experimental Damping Prediction of a Nonlinearly Coupled Low Pressure Steam Turbine Blading |
Christian Siewert; Lars Panning; Christoph Gerber, Pierre-Alain Masserey |
GT2008-51073 |
|
| IGTI |
2008 |
Dynamic Analysis of Fretting-Wear in Friction Contact Interfaces |
Loic Salles, Laurent Blanc, Fabrice Thouverez; Alexander M. Gouskov |
GT2008-51112 |
|
| IGTI |
2008 |
A Study of the Effect of Non-Linear Damping on Mistune Behaviour of a Turbine Rotor |
Bob Elliott, Michael E. Wardle; Robert A. Bellamy |
GT2008-51128 |
|
| IGTI |
2008 |
Online and Offline Vibration Analysis of Stator End Windings of Large Power Generators |
Dagmar Thien, Holger Romanowski, Sebastian Strack, Stefan Kempen, Thorsten Krol, Axel Langmann |
GT2008-51130 |
|
| IGTI |
2008 |
A Contact Model for Nonlinear Forced Response Prediction of Turbine Blades: Calculation Techniques and Experimental Comparison |
Christian M. Firrone, Marco Allara, Muzio M. Gola |
GT2008-51231 |
|
| IGTI |
2008 |
Vibratory Response Characterization of a Radial Turbine Wheel for Automotive Turbocharger Application |
Avadhoot Kulkarni, Gerry LaRue |
GT2008-51355 |
|
| IGTI |
2008 |
Nonlinear Modal Analysis and Energy Localization in a Bladed Disk Assembly |
F. Georgiades, M. Peeters, G. Kerschen, J. C. Golinval; M. Ruzzene |
GT2008-51388 |
|
| IGTI |
2008 |
Optimization of Intentional Mistuning Patterns for the Mitigation of the Effects of Random Mistuning |
Yun Han, Marc P. Mignolet |
GT2008-51439 |
|
| IGTI |
2008 |
On Damping Entire Bladed Disks Through Dampers on Only a Few Blades |
Javier Avalos, Marc P. Mignolet |
GT2008-51446 |
|
| IGTI |
2008 |
Nonlinear Dynamic Behaviors of Rotor Systems for Ball End Milling |
Ting-Nung Shiau, Kuan Hung Chen, K. H. Huang |
GT2008-51461 |
|
| IGTI |
2008 |
A Reduced-Order Integrated Design Synthesis for the Three-Dimensional Tailored Vibration Response and Flutter Control of High-Bypass Shroudless Fans |
O. G. McGee III, C. Fang |
GT2008-51479 |
|
| IGTI |
2008 |
Aerodynamic Mistuning of Structurally Coupled Blades |
Heinrich Stuer, Stefan Schmitt; Graham Ashcroft |
GT2008-50204 |
|
| IGTI |
2008 |
Experimental Demonstration of the Tip Clearance Flow Resonance Behind Compressor Non-Synchronous Vibration |
Jean Thomassin; Huu Duc Vo, Njuki W. Mureithi |
GT2008-50303 |
|
| IGTI |
2008 |
Forced Response Assessment Using Modal Force Based Indicator Functions |
M. Vahdati, C. Breard; G. Simpson; M. Imregun |
GT2008-50306 |
|
| IGTI |
2008 |
Aerodynamically Coupled Flutter of Multiple Blade Rows |
Masanobu Namba, Ayumi Kubo |
GT2008-50315 |
|
| IGTI |
2008 |
Forced Response of a Large Civil Fan Assembly |
J. S. Green |
GT2008-50319 |
|
| IGTI |
2008 |
Forced Response and Surge Behaviour of IP Core-Compressors With Ice-Damaged Rotor Blades |
Sridar Dhandapani, Mehdi Vahdati, Mehmet Imregun |
GT2008-50335 |
|
| IGTI |
2008 |
A Time-Domain Fluid-Structure Interaction Analysis of Fan Blades |
Seung Ho Cho; Taehyoun Kim; Seung Jin Song |
GT2008-50479 |
|
| IGTI |
2008 |
Numerical Study of Unsteady Flow Phenomena in a Partial Admission Axial Steam Turbine |
Narmin B. Hushmandi, Jiasen Hu, Jens Fridh, Torsten H. Fransson |
GT2008-50538 |
|
| IGTI |
2008 |
Numerical Simulation of Transonic Fan Flutter With 3D N-S CFD Code |
Mizuho Aotsuka, Naoki Tsuchiya; Yasuo Horiguchi; Kazuomi Yamamoto, Osamu Nozaki |
GT2008-50573 |
|
| IGTI |
2008 |
Efficient Design Method for Non-Synchronous Vibrations Using Enforced Motion |
Meredith A. Spiker, Robert E. Kielb, Kenneth C. Hall, Jeffrey P. Thomas |
GT2008-50599 |
|
| IGTI |
2008 |
Experimental and CFD Based Determination of Flutter Limits in Supersonic Space Turbines |
Pieter J. Groth, Hans E. Martensson, Niklas Edin |
GT2008-50675 |
|
| IGTI |
2008 |
Design and Experimental Verification of Mistuning of a Supersonic Turbine Blisk |
Pieter Groth, Clas Andersson, Hans Martensson |
GT2008-50677 |
|
| IGTI |
2008 |
Experimental and Numerical Flutter Investigation of the 1st Stage Rotor in 4-Stage High Speed Compressor |
E. Johann, B. Muck; J. Nipkau |
GT2008-50698 |
|
| IGTI |
2008 |
The Effects of Aerodynamic Asymmetric Perturbations on Forced Response of Bladed Disks |
Tomokazu Miyakozawa, Robert E. Kielb, Kenneth C. Hall |
GT2008-50719 |
|
| IGTI |
2008 |
Effect of Stator Clocking on the 3D Aeroelastic Characteristics of Compressor Rotor Blades |
Romuald Rzadkowski; Vitally Gnesin, Luba Kolodyazhnaya |
GT2008-50767 |
|
| IGTI |
2008 |
Unsteady Blade and Disk Resonant Stress Analysis Due to Supersonic Inlet Guide Vane Wakes |
G. Nordwall; M. LeDuc; A. Demeulenaere |
GT2008-50865 |
|
| IGTI |
2008 |
Investigation on Flow Characteristic and Stability of Control Valves for Steam Turbine |
Guanwei Liu, Shunsen Wang, Jingru Mao, Hui Guo, Zhenping Feng, Xiaowei Xiang |
GT2008-51016 |
|
| IGTI |
2008 |
Aerodynamic Asymmetry Analysis of Unsteady Flows in Turbomachinery |
Kivanc Ekici, Robert E. Kielb, Kenneth C. Hall |
GT2008-51176 |
|
| IGTI |
2008 |
Verification of the Vibration Amplitude Prediction of Self-Excited LPT Rotor Blades Using a Fully Coupled Time-Domain Non-Linear Method and Experimental Data |
Roque Corral, Juan Manuel Gallardo |
GT2008-51416 |
|
| IGTI |
2008 |
Numerical and Experimental Study of Active Flutter Suppression With Piezoelectric Device for Transonic Cascade |
Toshinori Watanabe; Junichi Kazawa; Seiji Uzawa; Benjamin Keim |
GT2008-51467 |
|
| IGTI |
2008 |
Static Performance Characteristics and Rotordynamic Coefficients for a Four-Pad Ball-in-Socket Tilting Pad Journal Bearing |
Dara Childs, Joel Harris |
GT2008-50063 |
|
| IGTI |
2008 |
Measurements Versus Predictions for Rotordynamic Characteristics of a Flexure Pivot-Pad Tilting Pad Bearing in an LBP Condition at Higher Unit Loads |
Dara Childs, J. Eric Hensley |
GT2008-50066 |
|
| IGTI |
2008 |
Measurements Versus Predictions for Rotordynamic and Leakage Characteristics of a Convergent-Tapered, Honeycomb-Stator/Smooth-Rotor Annular Gas Seal |
Dara W. Childs, Daniel E. van der Velde |
GT2008-50068 |
|
| IGTI |
2008 |
Measurements Versus Predictions for the Rotordynamic Characteristics of a 5-Pad, Rocker-Pivot, Tilting-Pad Bearing in Load Between Pad Configuration |
Dara W. Childs, Clint R. Carter |
GT2008-50069 |
|
| IGTI |
2008 |
Low Speed Balancing for Supercritical Shafting in Gas Turbines |
Peter D. Hylton |
GT2008-50077 |
|
| IGTI |
2008 |
A Study of Thermohydrodynamic Features of Multi Wound Foil Bearing Using Lobatto Point Quadrature |
Kai Feng, Shigehiko Kaneko |
GT2008-50110 |
|
| IGTI |
2008 |
Diagnosing Coupled Lateral-Torsional Vibrations in Turbomachinery |
Vinayaka N. Rajagopalan; John M. Vance |
GT2008-50125 |
|
| IGTI |
2008 |
Static and Dynamic Performance of a Pressure Dam Bearings With Dam Steps That are (I) Square and (II) Filleted |
Dara Childs, Andrew Schaible; Bader Al-Jughaiman |
GT2008-50136 |
|
| IGTI |
2008 |
Experimental Study on Nonlinear Dynamics Characteristics of High-Speed Rotor-Gas Lubrication Bearing System |
Cex Ce, Jinfu Yang, Chaoqun Nie |
GT2008-50250 |
|
| IGTI |
2008 |
An Analytic Model of Oil-Film Force on Hydrodynamic Journal Bearing of Finite Length |
Jin Fu Yang; Sheng Bo Yang; Chen Ce; Da Ren Yu, Ying Cui; Kun Yang, Zhong Guang Fu |
GT2008-50251 |
|
| IGTI |
2008 |
A Criterion for Evaluation Stability of Journal Bearings-Rotor System |
Jin Fu Yang; Kun Yang; Sheng Bo Yang; Ce Chen; Ying Cui, Da Ren Yu; Yong Jun Wang |
GT2008-50252 |
|
| IGTI |
2008 |
Identification and Correction of Rotor Instability in an Oil-Free Gas Turbine |
Daniel R. Lubell, Jonathan L. Wade, Navjot S. Chauhan, John G. Nourse |
GT2008-50305 |
|
| IGTI |
2008 |
Successful Oil-Free Version of a Gas Compressor Through Integrated Design of Foil Bearings |
Jonathan L. Wade, Daniel R. Lubell, Dennis Weissert |
GT2008-50349 |
|
| IGTI |
2008 |
Leveraging the Strengths of Commercial Finite Element Modeling Codes and Custom Engineered Software to Solve Atypical Rotordynamic Problems |
David Ransom |
GT2008-50363 |
|
| IGTI |
2008 |
Analysis on Dynamic Characteristics of Gas Turbine Rotor Considering Contact Effects and Pre-Tightening Force |
Qi Yuan, Rui Gao, Zhenping Feng; Jianlu Wang |
GT2008-50396 |
|
| IGTI |
2008 |
Dynamic Response of the Vertical Rotor System to Base Excitation |
Jianli Zuo, Jianjun Wu, Ping Li, Shenjian Su |
GT2008-50402 |
|
| IGTI |
2008 |
Shrink Fit Effects on Rotordynamic Stability: Experimental Study |
Syed Muhammad Mohsin Jafri; John M. Vance |
GT2008-50410 |
|
| IGTI |
2008 |
An Investigation on Dynamic Characteristics of a High Speed Rotor With Complex Structure for Microturbine Test Rig |
Di Zhang, Yonghui Xie, Zhenping Feng |
GT2008-50411 |
|
| IGTI |
2008 |
Shrink Fit Effects on Rotordynamic Stability: Theoretical Study |
Syed Muhammad Mohsin Jafri; John M. Vance |
GT2008-50412 |
|
| IGTI |
2008 |
Evaluation of Q-Values of a Rotor-Bearing System Using a Modal Open Loop Transfer Function |
Hiroyuki Fujiwara, Hiroto Oyama, Norihisa Anegawa, Osami Matsushita |
GT2008-50459 |
|
| IGTI |
2008 |
Relationship of Influence Coefficients Between Static-Couple and Multi-Plane Methods on Two-Plane Balancing |
John J. Yu |
GT2008-50463 |
|
| IGTI |
2008 |
A Semi-Analytical Method for the Solution of Entrance Flow Effects in Inherently Restricted Aerostatic Bearings |
Tobias Waumans, Farid Al-Bender, Dominiek Reynaerts |
GT2008-50499 |
|
| IGTI |
2008 |
Nonlinear Identification of Mechanical Parameters in a Squeeze Film Damper with Integral Mechanical Seal |
Adolfo Delgado, Luis San Andres |
GT2008-50528 |
|
| IGTI |
2008 |
Maps of Vibrational Symptoms of Bearing Misalignment Defects in Large Power Turboset |
Jozef Rybczynski |
GT2008-50558 |
|
| IGTI |
2008 |
Effect of Side Feed Pressurization on the Dynamic Performance of Gas Foil Bearings: A Model Anchored to Test Data |
Tae Ho Kim, Luis San Andres |
GT2008-50571 |
|
| IGTI |
2008 |
Nonlinear Numerical Prediction of Gas Foil Bearings Stability and Unbalanced Response |
Sebastien Le Lez, Mihai Arghir, Jean Frene |
GT2008-50641 |
|
| IGTI |
2008 |
A New Fluid Film Bearing Test Rig for Oil and Water Bearings |
Tim Dimond, Robert D. Rockwell Jr., Pradip N. Sheth, Paul E. Allaire |
GT2008-50654 |
|
| IGTI |
2008 |
Damping Ratio Estimation Techniques for Rotordynamic Stability Measurements |
C. Hunter Cloud; Eric H. Maslen, Lloyd E. Barrett |
GT2008-50691 |
|
| IGTI |
2008 |
Ground-Based Vibration Response of a Spinning, Cyclic Symmetric Rotor With Gyroscopic and Centrifugal Softening Effects |
I. Y. Shen, Hyunchul Kim |
GT2008-50727 |
|
| IGTI |
2008 |
Optimization Design of the Geared Rotor System With Critical Speed Constraints Using the Enhanced Genetic Algorithm |
T. N. Shiau, C. H. Kang, D. S. Liu, E. K. Lee; W. C. Hsu |
GT2008-50754 |
|
| IGTI |
2008 |
On the Use of Actively Controlled Auxiliary Bearings in Magnetic Bearing Systems |
Iain S. Cade, Patrick S. Keogh, M. Necip Sahinkaya, Clifford R. Burrows |
GT2008-50831 |
|
| IGTI |
2008 |
Windback Floating Oil Seal Optimization Using CFD |
Gocha Chochua, Joseph Tecza, Michael Lyons |
GT2008-50843 |
|
| IGTI |
2008 |
A New Frequency-Speed Diagram Weighted With Strength of Modes in Rotating Machinery |
Yun-Ho Seo, Chong-Won Lee |
GT2008-50855 |
|
| IGTI |
2008 |
Research on Circumferential Fluid Pressure Distribution and Whirl Stability of Rotor-Bearing System |
Ce Chen, Jinfu Yang, Chaoqun Nie; Ying Cui, Daren Yu; Shengbo Yang; Kunx Kun, Zhongguang Fu |
GT2008-50882 |
|
| IGTI |
2008 |
Rotordynamic Analysis of a Power Turbine Including Support Flexibility Effects |
Oscar De Santiago, Edward Abraham |
GT2008-50900 |
|
| IGTI |
2008 |
Blade-Shaft Coupled Resonance Vibration by Using Active Magnetic Bearing Excitation |
Norihisa Anegawa, Hiroyuki Fujiwara, Osami Matsushita |
GT2008-50904 |
|
| IGTI |
2008 |
Field Identification of Stiffness and Damping Characteristics of Fluid Film Bearings |
Aly El-Shafei, Sameh H. Tawfick, M. O. A. Mokhtar |
GT2008-50909 |
|
| IGTI |
2008 |
High Temperature, Permanent Magnet Biased, Fault Tolerant Homopolar Magnetic Bearing Development |
Alan Palazzolo, Randall Tucker, Kyung-Dae Kang, Andrew Kenny, Varun Gandhi; Jinfang Liu; Andrew Provenza; Heeju Choi |
GT2008-50917 |
|
| IGTI |
2008 |
Compliant Hybrid Journal Bearings Using Integral Wire Mesh Dampers |
Bugra H. Ertas |
GT2008-50984 |
|
| IGTI |
2008 |
Evaluation of Impact Loads of Clutch Engaging Within Single Shaft Applications for Power Generation |
Bernd Luneburg, Meinolf Klocke; Frank Joswig, Stefan Kulig |
GT2008-51063 |
|
| IGTI |
2008 |
Insights Into Discrepancies Between Results of Nonlinear and Linear Vibration Analyses of Rigid Rotors on Journal Bearings |
Demetrio C. Zachariadis |
GT2008-51084 |
|
| IGTI |
2008 |
Torsional Vibration in Rotordynamic System, Identified by Monitoring Gearbox Behaviour |
Lorenzo Naldi, Roberto Biondi, Valerio Rossi |
GT2008-51086 |
|
| IGTI |
2008 |
Condition Monitoring of Rotor Using Active Magnetic Actuator |
Jerzy T. Sawicki; Michael I. Friswell; Alex H. Pesch, Adam Wroblewski |
GT2008-51169 |
|
| IGTI |
2008 |
Hot Spots in Turboexpander Bearings: Case History, Stability Analysis, Measurements and Operational Experience |
Joachim Schmied; Josef Pozivil, Joseph Walch |
GT2008-51179 |
|
| IGTI |
2008 |
A Simple Approach to Determine Uncertainty Bounds on Bearing Rotordynamic Coefficients Identification |
Luis Medina, Rafael Ruiz, Sergio Diaz |
GT2008-51200 |
|
| IGTI |
2008 |
Nonlinear Vibration Analysis of an Unbalanced Flexible Rotor Supported by Ball Bearings With Radial Internal Clearance |
T. C. Gupta; K. Gupta; D. K. Sehgal |
GT2008-51204 |
|
| IGTI |
2008 |
Smart Turbomachines Using Active Magnetic Bearings |
R. Larsonneur, P. Richard |
GT2008-51299 |
|
| IGTI |
2008 |
Refinement of Physics Based Approach Used in the Prediction of Impeller Rotordynamic Forces for Centrifugal Compressors |
J. Jeffrey Moore, David L. Ransom |
GT2008-51484 |
|
| IGTI |
2008 |
Stochastic Crack Growth Analysis on Turbine Disk Based on FEM |
Dianyin Hu, Rongqiao Wang |
GT2008-50154 |
|
| IGTI |
2008 |
Probabilistic Analysis of Accelerated Life Tests for Thermal Barrier Coatings |
Heinz Riesch-Oppermann; Patricia Hulsmeier |
GT2008-50456 |
|
| IGTI |
2008 |
Estimating Critical Flaw Sizes in Welds of the New ARES I-X Space Vehicle for its Successful Solo Flight Using Probabilistic Approaches |
Shantaram S. Pai; V. K. Nagpal, Peter A. Hoge, B. M. Patel |
GT2008-50626 |
|
| IGTI |
2008 |
Probabilistic Analysis on Turbine Disk Under LCF-Creep |
Dianyin Hu, Rongqiao Wang |
GT2008-50722 |
|
| IGTI |
2008 |
Nonlinear Stochastic Dynamics: Chaos and Reliability Analysis for Single Degree Freedom Model of a Rotor Blade |
Pankaj Kumar; S. Narayanan |
GT2008-50736 |
|
| IGTI |
2008 |
Investigation in the Eccentricity of Spoke Centered Turbomachinery Components |
Alexander K. Stumvoll, Hans-Peter Kau |
GT2008-51066 |
|
| IGTI |
2008 |
Probabilistic Treatment of Aircraft Engine Usage |
M. P. Enright, S. J. Hudak, R. C. McClung |
GT2008-51393 |
|
| IGTI |
2008 |
A Study of Modest CFD Models for the Design of an Annular Diffuser With Struts for Swirling Flow |
G. K. Feldcamp, A. M. Birk |
GT2008-50605 |
|
| IGTI |
2008 |
Experimental Study of Oblong Exhaust Ejectors With Multi-Ring Oblong Entraining Diffusers |
Qi Chen, A. M. Birk |
GT2008-50696 |
|
| IGTI |
2008 |
Improving the Performance of a Bent Ejector With Inlet Swirl |
Asim Maqsood, A. M. Birk |
GT2008-51209 |
|
| IGTI |
2008 |
The Stability-Limiting Flow Mechanisms in a Subsonic Axial-Flow Compressor and its Passive Control With Casing Treatment |
Xingen Lu, Junqiang Zhu, Chaoqun Nie, Weiguang Huang |
GT2008-50006 |
|
| IGTI |
2008 |
Stability Enhancement and Hysteresis Improvement of Axial Flow Fan by Discrete and Distributed Tip Injection Schemes |
Roy Bhaskar, Subrahmanyam Veraarapu |
GT2008-50075 |
|
| IGTI |
2008 |
Tip Clearance Vortex Oscillation, Vortex Shedding and Rotating Instability in an Axial Transonic Compressor Rotor |
Chunill Hah; Jorg Bergner; Heinz-Peter Schiffer |
GT2008-50105 |
|
| IGTI |
2008 |
Interaction of Rotor and Casing Treatment Flow in an Axial Single-Stage Transonic Compressor With Circumferential Grooves |
Martin W. Muller, Heinz-Peter Schiffer; Chunill Hah; Christoph Biela |
GT2008-50135 |
|
| IGTI |
2008 |
Water Film Formation on an Axial Flow Compressor Rotor Blade |
Theoklis Nikolaidis, Pericles Pilidis, J. A. Teixeira, V. Pachidis |
GT2008-50137 |
|
| IGTI |
2008 |
Measured and Predicted Performance of a High Pressure Ratio Supersonic Compressor Rotor |
Allan D. Grosvenor, David A. Taylor, Jonathan R. Bucher, Michael J. Aarnio, Paul M. Brown, Robert D. Draper, P. Shawn Lawlor |
GT2008-50150 |
|
| IGTI |
2008 |
Prediction of Evaporative Effects Within the Blading of an Industrial Axial Compressor |
Charles Matz, Wolfgang Kappis, Giovanni Cataldi; Gerd Mundinger; Eivind Helland; Stefan Bischoff; Matthias Ripken |
GT2008-50166 |
|
| IGTI |
2008 |
Breakdown of the Tip Clearance Vortex in a Rotor Equivalent Cascade and in a Single-Stage Low-Speed Compressor |
Henner Schrapp, Udo Stark, Horst Saathoff |
GT2008-50195 |
|
| IGTI |
2008 |
Application of Detached Eddy Simulation in a Subsonic Compressor Rotor |
Chunwei Gu, Fan Feng, Xuesong Li, Meilan Chen |
GT2008-50203 |
|
| IGTI |
2008 |
Active Flow Control in a Single-Stage Axial Compressor Using Tip Injection and Endwall Boundary Layer Removal |
B. Dobrzynski, H. Saathoff, G. Kosyna; C. Clemen, V. Gummer |
GT2008-50214 |
|
| IGTI |
2008 |
Boundary Layer Control in a Compressor Cascade Using Distributed Suction |
Utpal Chakraborthy, A. M. Pradeep |
GT2008-50225 |
|
| IGTI |
2008 |
Unsteady Pressure Measurement in a Single Stage Axial Transonic Compressor Near the Stability Limit |
Christoph Biela, Martin W. Muller, Heinz-Peter Schiffer; Carsten Zscherp |
GT2008-50245 |
|
| IGTI |
2008 |
An Entropy Based Evaluation of Efficiency of a Transonic Compressor Rotor With Water Injection |
Istvan Szabo, Mark G. Turner |
GT2008-50248 |
|
| IGTI |
2008 |
Design of a Highly-Loaded Four-Stage Low-Speed Research Compressor |
C. Clemen, H. Schrapp, V. Gummer; R. Muller, K. Vogeler, M. Kunzelmann |
GT2008-50254 |
|
| IGTI |
2008 |
Transonic Fan Tip-Flow Features Revealed by High Frequency Response Over-Tip Pressure Measurements |
Hyoun-Woo Shin, William Solomon, Aspi Wadia |
GT2008-50279 |
|
| IGTI |
2008 |
Influence of Gap Between Casing and Variable Stator Blade on Axial Compressor Performance |
Beat Ribi, Michael P. Meyer |
GT2008-50301 |
|
| IGTI |
2008 |
Numerical and Experimental Investigation on a Low-Speed Compressor Cascade With Circulation Control |
S. Fischer, H. Saathoff, R. Radespiel |
GT2008-50302 |
|
| IGTI |
2008 |
The Impact of the Vortex Design Method on the Stall Behavior of Axial Flow Fan and Compressor Rotors |
Janos Vad, Csaba Horvath |
GT2008-50333 |
|
| IGTI |
2008 |
Effects of Sand Ingestion Through an Axial Fan With Blade Staggering |
Adel Ghenaiet |
GT2008-50338 |
|
| IGTI |
2008 |
The Primary Discussion of Blade Sections for Application of Helium Compressor |
Yu E. Liu, Yufeng Sun |
GT2008-50356 |
|
| IGTI |
2008 |
Loss Reduction in Compressor Cascades by Means of Passive Flow Control |
A. Hergt, R. Meyer; M. W. Mueller; K. Engel |
GT2008-50357 |
|
| IGTI |
2008 |
3D Numerical Investigation of Tandem Airfoils for a Core Compressor Rotor |
Jonathan McGlumphy, Wing-Fai Ng; Steven R. Wellborn; Severin Kempf |
GT2008-50427 |
|
| IGTI |
2008 |
Semi-Inverse Design Applied to an Eight Stage Transonic Axial Flow Compressor |
Paul Hield |
GT2008-50430 |
|
| IGTI |
2008 |
Optimization of Non-Axisymmetric Endwalls in Compressor S-Shaped Ducts |
Edward M. Naylor, Cecilia Ortiz Duenas, Robert J. Miller, Howard P. Hodson |
GT2008-50448 |
|
| IGTI |
2008 |
Performance Predicting Modeling of Axial-Flow Compressor at Design and Off-Design Conditions |
Ali Madadi, Ali Hajilouy Benisi |
GT2008-50550 |
|
| IGTI |
2008 |
A Study of Parameter Selection Principle and Internal Flow Mechanism in a Multi-Stage Low-Reaction Axial Flow Compressor |
Songtao Wang, Xiaoqing Qiang, Weichun Lin, Guotai Feng, Zhongqi Wang |
GT2008-50554 |
|
| IGTI |
2008 |
Experiments and Computations on Large Tip Clearance Effects in a Linear Cascade |
Richard Williams, David Gregory-Smith, Li He, Grant Ingram |
GT2008-50557 |
|
| IGTI |
2008 |
Internal Losses and Flow Behavior in a Turbofan Stage at Windmill |
Dilip Prasad, Wesley K. Lord |
GT2008-50560 |
|
| IGTI |
2008 |
Time Resolved Simulation and Experimental Validation of the Flow in Axial Slot Casing Treatments for Transonic Axial Compressors |
Giovanni A. Brignole; Florian C. T. Danner, Hans-Peter Kau |
GT2008-50593 |
|
| IGTI |
2008 |
Further Effects of Water Ingestion on Axial Flow Compressors and Aeroengines at Part Speed |
John Williams |
GT2008-50620 |
|
| IGTI |
2008 |
Validation and Calibration of Modern CFD RANS Codes for the Prediction of Transonic Axial-Centrifugal Compressors |
Mahmoud L. Mansour, Greg Holbrook, John Gunaraj; Mohamed Qizar, Vikram Mangat |
GT2008-50652 |
|
| IGTI |
2008 |
Validation of Steady Average-Passage and Mixing-Plane CFD Approaches for the Performance Prediction of a Modern Gas Turbine Multistage Axial Compressor |
Mahmoud L. Mansour, John Gunaraj; Shraman Goswami |
GT2008-50653 |
|
| IGTI |
2008 |
Simulation for a New Cascade of Helium Compressor With Enhanced Pressure Ratio |
Yanli Long, Limin Xu, Chunling Xie, Yufeng Sun |
GT2008-50690 |
|
| IGTI |
2008 |
Influence of Blade Fillets on the Performance of a 15 Stage Gas Turbine Compressor |
E. Kugeler, D. Nurnberger, A. Weber; K. Engel |
GT2008-50748 |
|
| IGTI |
2008 |
Numerical Investigation of Relation Between Unsteady Behavior of Tip Leakage Vortex and Rotating Disturbance in a Transonic Axial Compressor Rotor |
K. Yamada, K. Funazaki, H. Sasaki |
GT2008-50779 |
|
| IGTI |
2008 |
Development of a Tip Leakage Control Device for an Axial Flow Fan |
Cengiz Camci, Ali Akturk |
GT2008-50785 |
|
| IGTI |
2008 |
Steady and Unsteady Flow Field in a Multistage Low-Speed Axial Compressor: A Test Case |
Mario Kunzelmann, Ronald Mailach, Ralf Muller, Konrad Vogeler |
GT2008-50793 |
|
| IGTI |
2008 |
High-Fidelity Numerical Analysis of Per-Rev-Type Inlet Distortion Transfer in Multistage Fans: Part I -- Simulations With Selected Blade Rows |
Jixian Yao; Steven E. Gorrell; Aspi R. Wadia |
GT2008-50812 |
|
| IGTI |
2008 |
High-Fidelity Numerical Analysis of Per-Rev-Type Inlet Distortion Transfer in Multistage Fans: Part II -- Entire Component Simulation and Investigation |
Jixian Yao; Steven E. Gorrell; Aspi R. Wadia |
GT2008-50813 |
|
| IGTI |
2008 |
Time Accurate Simulations of a Counter-Rotating Aspirated Compressor |
Robert D. Knapke, Mark G. Turner, Michael G. List, Daniel S. Galbraith; Tim Beach; Ali A. Merchant |
GT2008-50877 |
|
| IGTI |
2008 |
Effects of the Inlet Boundary Layer Thickness on Rotating Stall in an Axial Compressor |
Minsuk Choi; Seong Hwan Oh, Han Young Ko; Je Hyun Baek |
GT2008-50886 |
|
| IGTI |
2008 |
Numerical Simulation of Endwall Fence on the Secondary Flow in Compressor Cascade |
Jingjun Zhong, Ji-ang Han, Yanming Liu, Fu Tian |
GT2008-50888 |
|
| IGTI |
2008 |
Numerical Simulation of the Flow Pulsations Origin in Cascades of the Rear Blade Rows in a Gas Turbine Axial Compressor Using Low Calorific Fuel |
Vaclav Cyrus; Jiri Polansky |
GT2008-50966 |
|
| IGTI |
2008 |
Control of Short Length Scale Rotating Stall Inception on a High-Speed Axial Compressor With Plasma Actuation |
Huu Duc Vo; Scott C. Morris, Joshua D. Cameron |
GT2008-50967 |
|
| IGTI |
2008 |
Some Effects of Non-Axisymmetric End Wall Profiling on Axial Flow Compressor Aerodynamics: Part I -- Linear Cascade Investigation |
N. W. Harvey |
GT2008-50990 |
|
| IGTI |
2008 |
The Effect of Non-Axisymmetric End Wall Profiling on Axial Flow Compressor Aerodynamics: Part II -- Multi-Stage HPC CFD Study |
N. W. Harvey, T. P. Offord |
GT2008-50991 |
|
| IGTI |
2008 |
Shaping of Tip End-Plate to Control Leakage Vortex Swirl in Axial Flow Fans |
Alessandro Corsini, Franco Rispoli; A. G. Sheard |
GT2008-51062 |
|
| IGTI |
2008 |
CFD Investigation on the Circumferential Grooves Casing Treatment of Transonic Compressor |
Xudong Huang, Haixin Chen, Song Fu |
GT2008-51107 |
|
| IGTI |
2008 |
Influence of Active Methods of Flow Control on Compressor Blade Cascade Flow |
Milan Matejka, Pavel Safarik; Lukas Popelka; Jiri Nozicka |
GT2008-51109 |
|
| IGTI |
2008 |
Endwall Performance of Outlet Guide Vane Cascades With Different Blade Loading Distributions |
Toyotaka Sonoda; Heinz-Adolf Schreiber; Toshiyuki Arima |
GT2008-51111 |
|
| IGTI |
2008 |
Application of Casing Circumferential Grooves to Counteract the Influence of Tip Clearance |
Victor Mileshin, Andrew Startsev, Igor Brailko |
GT2008-51147 |
|
| IGTI |
2008 |
Design of a Low Solidity Flow-Controlled Stator With Coanda Surface in a High Speed Compressor |
Y. Guendogdu, A. Vorreiter, J. R. Seume |
GT2008-51180 |
|
| IGTI |
2008 |
Investigation of Tip-Flow Based Stall Criteria Using Rotor Casing Visualization |
Matthew A. Bennington, Joshua D. Cameron, Scott C. Morris; Jen-Ping Chen; Camille Legault; Sean T. Barrows; G. Scott McNultly, Aspi R. Wadia |
GT2008-51319 |
|
| IGTI |
2008 |
On the Interpretation of Casing Measurements in Axial Compressors |
Joshua D. Cameron, Scott C. Morris; Sean T. Barrows, Jen-Ping Chen |
GT2008-51371 |
|
| IGTI |
2008 |
Performance and Short Length-Scale Disturbance Generation in an Axial Compressor With Non-Uniform Tip Clearance |
Scott C. Morris, Joshua D. Cameron, Matthew A. Bennington; G. Scott McNulty; Aspi Wadia |
GT2008-51372 |
|
| IGTI |
2008 |
Numerical Investigation on the Effects of Self-Excited Tip Flow Unsteadiness and Blade Row Interactions on the Performance of a Low Speed Compressor Rotor |
Daniel Lee, Paul D. Orkwis; Fu-Lin Tsung, William Magnuszewski, Christopher Noll, G. Scott McNulty |
GT2008-51385 |
|