Search form for published papers in conferences related to rotordynamics.

Provided by Rotating Machinery Analysis, Inc.

Return to www.rotordynamics.org

List of conferences in the data base.

Enter search criteria
Conferences
Paper Title:
Paper Author:
From year:
To year:
Records per page:
Items found: 917 
After performing a search, to obtain a hardcopy of an article or entire proceeding try clicking on the link in the first column, which shows the name of the conference sponsor.
Papers
Conference Year Paper Title Paper Author Page Number Other
IGTI  2008  Windback Floating Oil Seal Optimization Using CFD  Gocha Chochua, Joseph Tecza, Michael Lyons  GT2008-50843   
IGTI  2008  Windage Power Losses From Spiral Bevel Gears With Varying Oil Flows and Shroud Configurations  Graham Johnson, Budi Chandra, Colin Foord, Kathy Simmons  GT2008-50424   
IGTI  2008  Wide Gap Braze Repair Using Vertically Laminated Repair Scheme  Doug Nagy; Xiao Huang  GT2008-50046   
IGTI  2008  Wet Gas Performance of a Single Stage Centrifugal Compressor  Oyvind Hundseid, Lars E. Bakken, Trond G. Gruner; Lars Brenne, Tor Bjorge  GT2008-51156   
IGTI  2008  Weibull Distributions Applied to Cost and Risk Analysis for Aero Engines  D. S. Pascovici, S. O. T. Ogaji, P. Pilidis, K. G. Kyprianidis, F. Colmenares  GT2008-51060   
IGTI  2008  Wave Rotor Design Procedure for Gas Turbine Enhancement  Ludek Pohorelsky; Pranav Sane, Norbert Muller; Tomas Rozsas  GT2008-51354   
IGTI  2008  Water Film Formation on an Axial Flow Compressor Rotor Blade  Theoklis Nikolaidis, Pericles Pilidis, J. A. Teixeira, V. Pachidis  GT2008-50137   
IGTI  2008  Volume Dynamics Propulsion System Modeling for Supersonics Vehicle Research  George Kopasakis, Joseph W. Connolly, Daniel E. Paxson; Peter Ma  GT2008-50524   
IGTI  2008  Vibratory Response Characterization of a Radial Turbine Wheel for Automotive Turbocharger Application  Avadhoot Kulkarni, Gerry LaRue  GT2008-51355   
IGTI  2008  Verification of the Vibration Amplitude Prediction of Self-Excited LPT Rotor Blades Using a Fully Coupled Time-Domain Non-Linear Method and Experimental Data  Roque Corral, Juan Manuel Gallardo  GT2008-51416   
IGTI  2008  Verification of Low NOx Performance of Simple Primary Rich Combustion Approach by a Newly Established Full Annular Combustor Test Facility  Mitsumasa Makida, Hideshi Yamada, Kazuo Shimodaira, Seiji Yoshida, Yoji Kurosawa, Takeshi Yamamoto  GT2008-51419   
IGTI  2008  Velocity Distributions for Low Pressure Turbines  John D. Coull, Richard L. Thomas, Howard P. Hodson  GT2008-50589   
IGTI  2008  Validation of Steady Average-Passage and Mixing-Plane CFD Approaches for the Performance Prediction of a Modern Gas Turbine Multistage Axial Compressor  Mahmoud L. Mansour, John Gunaraj; Shraman Goswami  GT2008-50653   
IGTI  2008  Validation of CFD Predicted Discharge Coefficients for Thick Plate Orifices With Approach Flow Perpendicular and Inclined to the Orifice Axis  Anish Kumar Gupta; Douglas Ramerth; Dhinagaran Ramachandra  GT2008-50742   
IGTI  2008  Validation and Calibration of Modern CFD RANS Codes for the Prediction of Transonic Axial-Centrifugal Compressors  Mahmoud L. Mansour, Greg Holbrook, John Gunaraj; Mohamed Qizar, Vikram Mangat  GT2008-50652   
IGTI  2008  Validation and Analysis of Numerical Results for a Varying Aspect Ratio Two-Pass Internal Cooling Channel  Igor V. Shevchuk, Sean C. Jenkins, Bernhard Weigand, Jens von Wolfersdorf, Sven Olaf Neumann; Martin Schneider  GT2008-51219   
IGTI  2008  Using Profiled Endwalls, Blade Lean and Leading Edge Extensions to Minimize Secondary Flow  David Bagshaw; David Gregory-Smith, Grant Ingram; Mark Stokes  GT2008-50811   
IGTI  2008  Use of the Adiabatic Wall Temperature in Film Cooling to Predict Wall Heat Flux and Temperature  Katharine L. Harrison, David G. Bogard  GT2008-51424   
IGTI  2008  Unsteady Simulations for an Advanced-Louver Cooling Scheme  Sung In Kim, Chad X.-Z. Zhang, Ibrahim G. Hassan  GT2008-51477   
IGTI  2008  Unsteady Pressure Measurement in a Single Stage Axial Transonic Compressor Near the Stability Limit  Christoph Biela, Martin W. Muller, Heinz-Peter Schiffer; Carsten Zscherp  GT2008-50245   
IGTI  2008  Unsteady Performance of a Double Entry Turbocharger Turbine With a Comparison to Steady Flow Conditions  Colin D. Copeland, Ricardo Martinez-Botas; Martin Seiler  GT2008-50827   
IGTI  2008  Unsteady Numerical Simulation of the Flow in a Direct Transfer Pre-Swirl System  Fabio Ciampoli, Nicholas J. Hills, John W. Chew; Timothy Scanlon  GT2008-51198   
IGTI  2008  Unsteady Flow-Field Unreactive Experimental Characterisation and Velocity Fluctuations Analysis of an Ansaldo Energia Heavy Duty Gas Turbine Burner  Mario Caruggi, Alessandro Nilberto; Federico Bonzani  GT2008-50592   
IGTI  2008  Unsteady Effects on Transonic Turbine Blade-Tip Heat Transfer  N. R. Atkins; S. J. Thorpe; R. W. Ainsworth  GT2008-51177   
IGTI  2008  Unsteady CFD Investigation on Inlet Distortion in a Centrifugal Compressor  Armin Zemp, Albert Kammerer, Reza S. Abhari  GT2008-50744   
IGTI  2008  Unsteady Blade and Disk Resonant Stress Analysis Due to Supersonic Inlet Guide Vane Wakes  G. Nordwall; M. LeDuc; A. Demeulenaere  GT2008-50865   
IGTI  2008  Unsteady Analysis of Blade and Tip Heat Transfer as Influenced by Upstream Momentum and Thermal Wakes  Ali A. Ameri; David L. R. Rigby; Erlendur Steinthorsson; James Heidmann, John C. Fabian  GT2008-51242   
IGTI  2008  Unsteady 3-D Conjugated Heat Transfer Simulation of a Thermal Barrier Coated Gas Turbine Bucket  Alejandro Hernandez Rossette, Zdzislaw Mazur C.; Alain Demeulenaere, J. A. Roque Lopez Hernandez; Elder A. Bautista P.  GT2008-50597   
IGTI  2008  United Modeling of Working Process in Aircraft Gas Turbine Engines  M. Ivanov, B. I. Mamaev, R. Z. Nigmatullin  GT2008-50185   
IGTI  2008  Unique Replacement Method Developed for the U.S. Navy's Newest Gas Turbine Powered Warship  Abe L. Boughner, Matthew J. Driscoll, Shaun D. Hatcher  GT2008-50114   
IGTI  2008  ULN System for the New SGT5-8000H Gas Turbine: Design and High Pressure Rig Test Results  M. Huth, U. Gruschka, B. Janus, J. Meisl; S. Wasif  GT2008-51208   
IGTI  2008  U.S. Navy Experience With SSS (Synchro-Self-Shifting) Clutches  Morgan L. Hendry; B. Michael Zekas  GT2008-51338   
IGTI  2008  Turbulence Model Assessment for Conjugate Heat Transfer in a High Pressure Turbine Vane Model  Gustavo A. Ledezma, Gregory M. Laskowski, Anil K. Tolpadi  GT2008-50498   
IGTI  2008  Turbocharger Performance Maps Building Using a Hot Gas Test Stand  Giuliano Gardolinski Venson, Jose Eduardo Mautone Barros  GT2008-50994   
IGTI  2008  Turbo Fans With Very High Bypass Ratio but Acceptable Dimensions  Uwe L. H. Schmidt-Eisenlohr; Oliver E. Kosing  GT2008-50817   
IGTI  2008  Turbine Stator Well CFD Studies: Effects of Cavity Cooling Air Flow  Antonio Andreini, Riccardo Da Soghe, Bruno Facchini; Stefano Zecchi  GT2008-51067   
IGTI  2008  Turbine Clashing Transient Analysis: Impact of Rotor Disk Stage Onto Static Vane Stage After Shaft Rupture  Carlo Frola, Antonino Vassallo; Marco Degiovanni, Massimiliano Mattone  GT2008-50216   
IGTI  2008  Turbine Blade Tip Leakage Flow Control: Thick/Thin Blade Effects and Separation Line Studies  Julia E. Stephens, Thomas Corke, Scott C. Morris  GT2008-50705   
IGTI  2008  Turbine Blade Platform Film Cooling With Typical Stator-Rotor Purge Flow and Discrete-Hole Film Cooling  Zhihong Gao, Diganta Narzary, Je-Chin Han  GT2008-50286   
IGTI  2008  Trench Film Cooling: Effect of Trench Downstream Edge and Hole Spacing  Yiping Lu, Srinath V. Ekkad; Ronald S. Bunker  GT2008-50606   
IGTI  2008  Trapped Vortex Combustor Performance for Heavy-Duty Gas Turbines  Joel M. Haynes, Daniel Micka, Ben Hojnacki, Craig Russell; John Lipinski, Biswadip Shome, Marcus Huffman  GT2008-50134   
IGTI  2008  Transonic Fan Tip-Flow Features Revealed by High Frequency Response Over-Tip Pressure Measurements  Hyoun-Woo Shin, William Solomon, Aspi Wadia  GT2008-50279   
IGTI  2008  Transition Prediction on Turbine Blade Profile With Intermittency Transport Equation  Wladyslaw Piotrowski; Witold Elsner; Stanislaw Drobniak  GT2008-50796   
IGTI  2008  Transition Modeling Effects on the Simulation of a Stator Cascade With Active Flow Control  Dirk Mertens; Marius Swoboda, Andre Huppertz; Frank Thiele  GT2008-50697   
IGTI  2008  Transient Response and Thermal Performance of a Variable Displacement Vane Pump-Based Actuation System for Turbo Jet and Turbofan Aircraft Engines  Paul J. Paluszewski, Mihir C. Desai  GT2008-51394   
IGTI  2008  Transient Performance and Control System Design of Solid Oxide Fuel Cell/Gas Turbine Hybrids  Florian Kroll, Annette Nielsen, Stephan Staudacher  GT2008-50232   
IGTI  2008  Transient Combustion Modeling of an Oscillating Lean Premixed Methane/Air Flame  Jim B. W. Kok, Jan A. M. Withag; Khawar Syed  GT2008-51125   
IGTI  2008  Towards Improved Prediction of Aero-Engine Combustor Performance Using Large Eddy Simulations  S. James, M. S. Anand; Balu Sekar  GT2008-50199   
IGTI  2008  Towards an Automated Simulation Process in Combined Thermal Flow and Stress in Turbine Blade Cooling Analyses  Joel B. Davison, Stephen W. Ferguson, Adam F. Peck, Fred G. Mendonca; Allan Thomson  GT2008-51287   
IGTI  2008  Toward the Expansion of Low-Pressure-Turbine Airfoil Design Space  T. J. Praisner, E. A. Grover; J. P. Clark, R. Sondergaard; D. C. Knezevici, I. Popovic, S. A. Sjolander  GT2008-50898   
IGTI  2008  Torsional Vibration in Rotordynamic System, Identified by Monitoring Gearbox Behaviour  Lorenzo Naldi, Roberto Biondi, Valerio Rossi  GT2008-51086   
IGTI  2008  Topology-Optimized Intermediate Casing of Aero Engine and Comparative Evaluation of Titanium and Composite Architecture in Terms of Load Capacity and Weight Reduction  Markus Kober, Thomas Klauke, Arnold Kuhhorn; Olaf Lenk  GT2008-50644   
IGTI  2008  Tip-Timing Data Analysis for Mistuned Bladed Discs Assemblies  Cyrille Stephan, Marc Berthillier, Joseph Lardies; Arnaud Talon  GT2008-50825   
IGTI  2008  Tip Clearance Vortex Oscillation, Vortex Shedding and Rotating Instability in an Axial Transonic Compressor Rotor  Chunill Hah; Jorg Bergner; Heinz-Peter Schiffer  GT2008-50105   
IGTI  2008  Tip Clearance Flow Visualization of a Turbine Blade Cascade With Active and Passive Flow Control  Daniel K. Van Ness II, Thomas C. Corke, Scott C. Morris  GT2008-50703   
IGTI  2008  Tip Clearance Effects on Inlet Hot Streaks Migration Characteristics in High Pressure Stage of a Vaneless Counter-Rotating Turbine  Qingjun Zhao, Jianyi Du, Huishe Wang, Xiaolu Zhao, Jianzhong Xu  GT2008-50582   
IGTI  2008  Time-Varying Flame Ionization Sensing Applied to Natural Gas and Propane Blends in a Pressurized Lean Premixed (LPM) Combustor  D. L. Straub, B. T. Chorpening; W. L. Fincham; E. D. Huckaby, J. D. Thornton  GT2008-51210   
IGTI  2008  Time-Frequency Analysis of Transient Vibrations to Improve Turbo-Compressor Start-Up  Juan C. Jauregui, Oscar Gonzalez, Eduardo Rubio  GT2008-50572   
IGTI  2008  Time Resolved Simulation and Experimental Validation of the Flow in Axial Slot Casing Treatments for Transonic Axial Compressors  Giovanni A. Brignole; Florian C. T. Danner, Hans-Peter Kau  GT2008-50593   
IGTI  2008  Time Accurate Simulations of a Counter-Rotating Aspirated Compressor  Robert D. Knapke, Mark G. Turner, Michael G. List, Daniel S. Galbraith; Tim Beach; Ali A. Merchant  GT2008-50877   
IGTI  2008  Three-Dimensional Stress Analysis and Configuration Optimization of Cross Wavy Primary Surface Recuperator for Microturbine System  Q. W. Wang, D. J. Zhang, M. Zeng  GT2008-51506   
IGTI  2008  Three-Dimensional CFD Analysis of a Gas Turbine Combustor for Medium/Low Heating Value Syngas Fuel  Yan Xiong, Lucheng Ji, Zhedian Zhang, Yue Wang, Yunhan Xiao  GT2008-50662   
IGTI  2008  Three-Dimensional Aerodynamic Design of Turbine Blades Using the Adjoint Method  Yingchen Li, Zhenping Feng  GT2008-51225   
IGTI  2008  Three Dimensional Modeling of Creep Damage in Airfoils for Advanced Turbine Systems  Ventzislav G. Karaivanov, Danny W. Mazzotta, William S. Slaughter, Minking K. Chyu; Mary Anne Alvin  GT2008-51278   
IGTI  2008  Thermo-Mechanical Transient Analysis and Conceptual Optimization of a First Stage Bucket  A. Campos-Amezcua, Z. Mazur; A. Gallegos-Munoz  GT2008-51217   
IGTI  2008  Thermoeconomic Optimization of the Part-Flow Evaporative Gas Turbine Cycles  Mortaza Yari  GT2008-51144   
IGTI  2008  Thermodynanic Analysis of a Combined Micro Turbine With a Micro ORC  Mortaza Yari  GT2008-51163   
IGTI  2008  Thermodynamic Equilibrium Analysis of Rice Husk Pyrolysis  Baofeng Zhao, Xiaodong Zhang, Lei Chen, Xiangmei Meng, Jie Zhang, Guangfan Meng, Li Sun  GT2008-51052   
IGTI  2008  Thermodynamic Analysis of Part-Flow Cycle Supercritical CO2 Gas Turbines  Motoaki Utamura  GT2008-50151   
IGTI  2008  Thermoacoustic Models for Evaluating the Sensitivity to Instabilities of Multi-Burner Annular Combustion Chambers  L. Castellano; G. Benelli, L. Carrai, S. Sigali, I. Brunetti  GT2008-51246   
IGTI  2008  Thermoacoustic Modeling and Transfer Functions Determination for a Matrix Burner Using Unsteady CFD  Dieter Bohn, Nils Ohlendorf, James F. Willie  GT2008-50370   
IGTI  2008  Thermo Mechanical Fatigue Behaviour of Bare and Coated CMSX-4  T. Coppola; G. Pasquero; S. Riscifuli, O. Tassa  GT2008-50433   
IGTI  2008  The Use of Eddy Current Sensors for the Measurement of Rotor Blade Tip Timing: Sensor Development and Engine Testing  K. S. Chana; P. Russhard; D. N. Cardwell  GT2008-50792   
IGTI  2008  The Use of Eddy Current Sensor Based Blade Tip Timing for Rod Detection  K. S. Chana, D. N. Cardwell  GT2008-50791   
IGTI  2008  The Unsteady Loss in One-Stage Transonic Compressor Under Peak Efficiency and Near Stall Conditions  Yutao Sun, Yu-Xin Ren, Song Fu; Aspi Wadia  GT2008-51019   
IGTI  2008  The Stability-Limiting Flow Mechanisms in a Subsonic Axial-Flow Compressor and its Passive Control With Casing Treatment  Xingen Lu, Junqiang Zhu, Chaoqun Nie, Weiguang Huang  GT2008-50006   
IGTI  2008  The Role of Structural Damping in Aeroderivative Engine Structure Modeling  Jing Yuan; Agnieszka Muszynska; Kenneth Heyden  GT2008-50081   
IGTI  2008  The Primary Discussion of Blade Sections for Application of Helium Compressor  Yu E. Liu, Yufeng Sun  GT2008-50356   
IGTI  2008  The Performance Evaluations of Variations of Diffuser Geometry of the Centrifugal Compressor in a Marine Engine (70MW) Turbocharger  Hong-Won Kim, Jong-Il Park, Seung-Hyup Ryu, Sang-Hak Ghal, Seong-Wook Choi  GT2008-50751   
IGTI  2008  The Numerical Study of a New Air-Cooled Turbine Blade With Depression Feature at Leading Edge  Songtao Wang, Kai Wang, Xiaoqing Qiang, Zhongqi Wang  GT2008-50238   
IGTI  2008  The Influence of the History of Thermal Expansion on the Axial Turbine Characteristic  Valentin Silivestru, Romulus Petcu, Valeriu A. Vilag, Jeni A. Popescu  GT2008-51098   
IGTI  2008  The Influence of Lean and Sweep in a Low Pressure Steam Turbine: Throughflow Modelling and Experimental Measurements  Lutz Volker, Michael Casey; Heinrich Stuer; John Dunham  GT2008-50188   
IGTI  2008  The Influence of Lean and Sweep in a Low Pressure Steam Turbine: Analysis of Three Stages With a 3D CFD Model  Roland Sigg, Michael V. Casey, Jurgen F. Mayer; Norbert Surken  GT2008-50161   
IGTI  2008  The Influence of Dump Gap on External Combustor Aerodynamics at High Fuel Injector Flow Rates  A. Duncan Walker, Jon F. Carrotte, James J. McGuirk  GT2008-50271   
IGTI  2008  The Influence of Blade Lean on Straight and Annular Turbine Cascade Flow Field  Gabriele D'Ippolito, Vincenzo Dossena, Alessandro Mora  GT2008-51199   
IGTI  2008  The Impact of the Vortex Design Method on the Stall Behavior of Axial Flow Fan and Compressor Rotors  Janos Vad, Csaba Horvath  GT2008-50333   
IGTI  2008  The History of the Siemens Gas Turbine  Gerald McQuiggan, Ihor Diakunchak, Hans Juergen Kiesow  GT2008-50507   
IGTI  2008  The Engine 3E Core Engine  Holger Klinger, Waldemar Lazik, Thomas Wunderlich  GT2008-50679   
IGTI  2008  The Effects of Wet Compression on the Separated Flow in a Compressor Stage  Lanxin Sun, Yijin Li, Qun Zheng; Rakesh Bhargava  GT2008-50920   
IGTI  2008  The Effects of Steady Injection on an Ultra High Lift Vane in a LP Turbine  Thomas Schumann, Martin G. Rose, Stephan Staudacher; Jochen Gier, Th. Schroeder  GT2008-50330   
IGTI  2008  The Effects of Manufacturing Tolerances on Gas Turbine Cooling  Ronald S. Bunker  GT2008-50124   
IGTI  2008  The Effects of IGV Wake Impingement on the Boundary Layer and the Near-Wake of a Rotor Blade  Francesco Soranna, Yi-Chih Chow, Oguz Uzol, Joseph Katz  GT2008-50598   
IGTI  2008  The Effects of Aerodynamic Asymmetric Perturbations on Forced Response of Bladed Disks  Tomokazu Miyakozawa, Robert E. Kielb, Kenneth C. Hall  GT2008-50719   
IGTI  2008  The Effect of Wall Thickness on Nozzle Suction Side Film Cooling  Luzeng Zhang, Hee Koo Moon  GT2008-50631   
IGTI  2008  The Effect of Turbulence Intensity on Film Cooling of Gas Turbine Blade From Trenched Shaped Holes  S. Baheri; B. A. Jubran; S. P. Alavi Tabrizi  GT2008-50318   
IGTI  2008  The Effect of Specific Heat Ratio on the Performance of Compressible Flow Turbo-Machines  Theodor W. von Backstrom  GT2008-50183   
IGTI  2008  The Effect of Ribs and Tip Wall Distance on Heat Transfer for a Varying Aspect Ratio Two-Pass Ribbed Internal Cooling Channel  Sean C. Jenkins, Frank Zehnder, Igor V. Shevchuk, Bernhard Weigand, Jens von Wolfersdorf; Martin Schnieder  GT2008-51207   
IGTI  2008  The Effect of Non-Axisymmetric End Wall Profiling on Axial Flow Compressor Aerodynamics: Part II -- Multi-Stage HPC CFD Study  N. W. Harvey, T. P. Offord  GT2008-50991   
IGTI  2008  The Effect of Leading Edge Diameter on the Horse Shoe Vortex and Endwall Heat Transfer  Satoshi Hada; Kenichiro Takeishi, Yutaka Oda, Seijiro Mori; Shigeaki Nuta  GT2008-50892   
IGTI  2008  The Effect of Clearance Flow of Variable Area Nozzles on Radial Turbine Performance  Hideaki Tamaki, Shinya Goto, Masaru Unnno, Akira Iwakami  GT2008-50461   
IGTI  2008  The Effect of Blade Lean on the Solution of the Full Radial Equilibrium Equation  Ioannis Templalexis; Vassilios Pachidis, Pericles Pilidis; Petros Kotsiopoulos  GT2008-50259   
IGTI  2008  The Dynamics of the Vorticity Field in a Low Solidity Axial Turbine  K. G. Barmpalias, A. I. Kalfas, N. Chokani, R. S. Abhari  GT2008-51142   
IGTI  2008  The Development of Centrifugal Compressor Impeller  C. Xu, R. S. Amano  GT2008-50200   
IGTI  2008  The Demonstration and Efficacy of the 1 Meter Sound Level Criteria for Gas Turbines in Offshore Installations  Jeff Lotton  GT2008-50148   
IGTI  2008  The Comparison of Two Species Film Cooling Characteristics Between Trenched and Shaped Holes  Q. W. Wang, D. H. Zhang, Q. Y. Chen, L. Sun, M. Zeng  GT2008-51503   
IGTI  2008  The Asymmetric Twin Scroll Turbine for Exhaust Gas Turbochargers  Markus Muller, Thomas Streule, Siegfried Sumser, Gernot Hertweck, Arno Nolte, Wolfram Schmid  GT2008-50614   
IGTI  2008  The Application of Flow Control to an Aft-Loaded Low Pressure Turbine Cascade With Unsteady Wakes  Jeffrey P. Bons, Jon Pluim, Kyle Gompertz, Matthew Bloxham; John P. Clark  GT2008-50864   
IGTI  2008  The Analytical Approach to the Temperature Prediction of Steam Turbine Shells Based on the Thermocouple Temperature Measurements at a Few Points  Ajit B. Ekbote; Howard M. Brilliant  GT2008-50609   
IGTI  2008  Test-Model Correlation of Dry-Friction Damping Phenomena in Aero-Engines  P. Jean; C. Gibert; C. Dupont, J.-P. Lombard  GT2008-50891   
IGTI  2008  Test Results From the Advanced Humid Air Turbine System Pilot Plant: Part 2 -- Humidification, Water Recovery and Water Quality  Hidefumi Araki, Shinichi Higuchi, Tomomi Koganezawa, Shinya Marushima, Shigeo Hatamiya, Moriaki Tsukamoto  GT2008-51089   
IGTI  2008  Test Results From the Advanced Humid Air Turbine System Pilot Plant: Part 1 -- Overall Performance  Shinichi Higuchi, Tomomi Koganezawa, Yasuhiro Horiuchi, Hidefumi Araki, Takanori Shibata, Masami Noda  GT2008-51072   
IGTI  2008  Ten Years of Experience With a Small Jet Engine as a Support for Education  O. Leonard, J.-P. Thomas, S. Borguet  GT2008-50172   
IGTI  2008  Temporal Structure of the Boundary Layer in Low Reynolds Number, Low Pressure Turbine Profiles  Benigno J. Lazaro, Ezequiel Gonzalez; Raul Vazquez  GT2008-50616   
IGTI  2008  Temperature and Pressure Measurements in a Hot Cascade With Film Cooled Endwalls and Airfoils  James W. Post, Sumanta Acharya  GT2008-51327   
IGTI  2008  Systems Level Performance Estimations for a Pulse Detonation Based Hybrid Engine  Venkat E. Tangirala, Narendra D. Joshi  GT2008-51525   
IGTI  2008  System Design of a Novel Combined Cooling, Heat, Power, and Water Microturbine Combined Cycle  William E. Lear, Choon Jae Ryu, John F. Crittenden, Adithya Srinivasan, William Ellis, David R. Tiffany, Sherif A. Sherif; Peter L. Meitner  GT2008-51454   
IGTI  2008  Suction Side Gill-Region Film Cooling: Effects of Hole Shape and Orientation on Adiabatic Effectiveness and Heat Transfer Coefficient  Justin Chappell; Phil Ligrani; Sri Sreekanth, Terry Lucas  GT2008-50798   
IGTI  2008  Successful Oil-Free Version of a Gas Compressor Through Integrated Design of Foil Bearings  Jonathan L. Wade, Daniel R. Lubell, Dennis Weissert  GT2008-50349   
IGTI  2008  Study on Metal Rubber Material's Characteristics of Damping and Sound Absorption  Yanhong Ma, Haoyu Li, Hong Wang; Jie Hong  GT2008-50961   
IGTI  2008  Study on Advanced Internal Cooling Technologies for the Development of Next-Generation Small-Class Aircraft Engines  Shu Fujimoto, Yoji Okita; Yoshitaka Fukuyama, Takashi Yamane, Fujio Mimura, Masahiro Matsushita; Toyoaki Yoshida  GT2008-50444   
IGTI  2008  Study of Various Configurations Under Variable Density Mixing Conditions Aiming on Gas Turbine Combustion Using LES  Frederik Hahn, Clemens Olbricht, Johannes Janicka  GT2008-50268   
IGTI  2008  Stochastic Crack Growth Analysis on Turbine Disk Based on FEM  Dianyin Hu, Rongqiao Wang  GT2008-50154   
IGTI  2008  Steady-State and Transient Performance Modeling of Smart UAV Propulsion System Using SIMULINK  Jayoung Ki; Changduk Kong, Soenghee Kho; Changho Lee  GT2008-50772   
IGTI  2008  Steady State Off-Design and Transient Behavior of a SOFC/GT Hybrid Power Plant With Additional Firing of the GT Combustor  Christian Wachter, Franz Joos  GT2008-50553   
IGTI  2008  Steady State Analysis of a SOFC/GT Hybrid Power Plant Test Rig  Tobias Panne, Axel Widenhorn, Manfred Aigner  GT2008-50288   
IGTI  2008  Steady and Unsteady Flow Field in a Multistage Low-Speed Axial Compressor: A Test Case  Mario Kunzelmann, Ronald Mailach, Ralf Muller, Konrad Vogeler  GT2008-50793   
IGTI  2008  Static Performance Characteristics and Rotordynamic Coefficients for a Four-Pad Ball-in-Socket Tilting Pad Journal Bearing  Dara Childs, Joel Harris  GT2008-50063   
IGTI  2008  Static and Dynamic Performance of a Pressure Dam Bearings With Dam Steps That are (I) Square and (II) Filleted  Dara Childs, Andrew Schaible; Bader Al-Jughaiman  GT2008-50136   
IGTI  2008  Static and Dynamic Analysis of 2.5 MW Power Generation Gas Turbine Unit  Soo Yong Kim, Seung Joo Choe; Valeri P. Kovalevsky; Dong Hwa Kim  GT2008-50314   
IGTI  2008  State-of-the-Art Combustor Design Utilizing the Preliminary Combustor Design System Precodes  Nima Pegemanyfar; Michael Pfitzner  GT2008-50577   
IGTI  2008  Stacking and Thickness Optimization of a Compressor Blade Using Weighted Average Surrogate Model  Abdus Samad, Kwang-Yong Kim  GT2008-50262   
IGTI  2008  Stability Enhancement and Hysteresis Improvement of Axial Flow Fan by Discrete and Distributed Tip Injection Schemes  Roy Bhaskar, Subrahmanyam Veraarapu  GT2008-50075   
IGTI  2008  Spray Characterization at Jet Engine Thrust Augmentor Flow Conditions  Eugene Lubarsky, John T. Cutright, Ben T. Zinn; Rob McAmis  GT2008-50867   
IGTI  2008  Spectral Analysis of the Flow in an Intermediate Turbine Duct  Lars-Uno Axelsson, William K. George  GT2008-51340   
IGTI  2008  Spatio-Temporal Characterization of a Conical Swirler Flowfield Under Strong Forcing  A. Lacarelle, T. Faustmann; D. Greenblatt; C. O. Paschereit, O. Lehmann, D. M. Luchtenburg, B. R. Noack  GT2008-50970   
IGTI  2008  Some Effects of Non-Axisymmetric End Wall Profiling on Axial Flow Compressor Aerodynamics: Part I -- Linear Cascade Investigation  N. W. Harvey  GT2008-50990   
IGTI  2008  Solid Oxide Fuel Cell Hybrid Systems Fed by Liquid Fuels for Distributed Power Generation  Marco Santin, Alberto Traverso, Aristide Massardo  GT2008-50615   
IGTI  2008  Smart Turbomachines Using Active Magnetic Bearings  R. Larsonneur, P. Richard  GT2008-51299   
IGTI  2008  Skeletal Mechanism for C2H4 Combustion With PAH Formation  N. Slavinskaya, A. Zizin, M. Braun-Unkhoff, C. Lenfers  GT2008-51168   
IGTI  2008  Site Conversion and Field Performance of an Ultra-Low Emissions Combustion System for the MS7EA Gas Turbine  Jeffrey A. Benoit  GT2008-50472   
IGTI  2008  Simultaneous Spike-Type and Modal-Type Stall Inception: Theoretical Analysis  Yeshayahou Levy, Joseph Pismenny  GT2008-50079   
IGTI  2008  Simulation of Turbulent Lifted Flames Using a Partially-Premixed Coherent Flame Model (PCFM)  Yongzhe Zhang, Rajesh Rawat  GT2008-50441   
IGTI  2008  Simulation of Turbulent Flows in Turbine Blade Passages and Disc Cavities  Konstantin N. Volkov, Nicholas J. Hills, John W. Chew  GT2008-50672   
IGTI  2008  Simulation of the Transient Response of a Helicopter Turboshaft Engine to Hot-Gas Ingestion  Gulru Kocer, Oguz Uzol, Iikay Yavrucuk  GT2008-51164   
IGTI  2008  Simulation of Performance Deterioration of a Microturbine and Application of Neural Network to its Performance Diagnosis  Jae Eun Yoon, Jong Joon Lee, Tong Seop Kim; Jeong Lak Sohn  GT2008-51494   
IGTI  2008  Simulation of Inlet Fogging and Wet-Compression in a Single Stage Compressor Including Erosion Analysis  Jobaidur R. Khan, Ting Wang  GT2008-50874   
IGTI  2008  Simulation of Hydrogen Production From Biomass Pyrolysis Gas by Secondary Steam Reforming  Leteng Lin, Li Sun, Xiaodong Zhang, Xiaolu Yi, Min Xu  GT2008-51045   
IGTI  2008  Simulation for a New Cascade of Helium Compressor With Enhanced Pressure Ratio  Yanli Long, Limin Xu, Chunling Xie, Yufeng Sun  GT2008-50690   
IGTI  2008  Simulation and Production of Wound Impellers  Allen Eyler, Norbert Muller  GT2008-51310   
IGTI  2008  Simulation and Optimization of an Adjustable Inlet Guide Vane for Industrial Turbo Compressors  Michael Hensges  GT2008-50242   
IGTI  2008  Simulated Foreign Object Damage on Blades Aerofoils: Real Damage Investigation  Pierangelo Duo, Christian Pianka, Andrej Golowin; Matthias Fueller, Roger Schaefer, Ulf Bernhardt  GT2008-50371   
IGTI  2008  Simplified Approach to Predicting Rough Surface Transition  R. J. Boyle; M. Stripf  GT2008-51543   
IGTI  2008  Siemens SGT-800 Industrial Gas Turbine Enhanced to 47MW: Design Modifications and Operating Experience  Sergey Shukin, Mats Bjorkman, Mats Annerfeldt  GT2008-50087   
IGTI  2008  Shroud Leakage Modeling of the Flow in a Two Stage Axial Test Turbine  M. Pau, F. Congiu, N. Mandas  GT2008-51093   
IGTI  2008  Shrink Fit Effects on Rotordynamic Stability: Theoretical Study  Syed Muhammad Mohsin Jafri; John M. Vance  GT2008-50412   
IGTI  2008  Shrink Fit Effects on Rotordynamic Stability: Experimental Study  Syed Muhammad Mohsin Jafri; John M. Vance  GT2008-50410   
IGTI  2008  Shorten the Intermediate Turbine Duct Length by Applying an Integrated Concept  A. Marn, E. Gottlich; D. Cadrecha; H. P. Pirker  GT2008-50269   
IGTI  2008  Shipboard Mission Readiness Assessment  Thomas C. Cook, Scott G. Valentine  GT2008-51373   
IGTI  2008  Shaping of Tip End-Plate to Control Leakage Vortex Swirl in Axial Flow Fans  Alessandro Corsini, Franco Rispoli; A. G. Sheard  GT2008-51062   
IGTI  2008  Separated Flow Measurements on a Highly Loaded Low-Pressure Turbine Airfoil  Ralph J. Volino  GT2008-51445   
IGTI  2008  Sensor TBCs: Remote In-Situ Condition Monitoring of EB-PVD Coatings at Elevated Temperatures  Remy J. L. Steenbakker; Jorg P. Feist; John R. Nicholls, Richard G. Wellman  GT2008-51192   
IGTI  2008  Sensitization of the SST Turbulence Model to Rotation and Curvature by Applying the Spalart-Shur Correction Term  Pavel E. Smirnov; Florian R. Menter  GT2008-50480   
IGTI  2008  Semi-Inverse Design Applied to an Eight Stage Transonic Axial Flow Compressor  Paul Hield  GT2008-50430   
IGTI  2008  Secondary Air System Model for Integrated Thermomechanical Analysis of a Jet Engine  Yannick Muller  GT2008-50078   
IGTI  2008  Secondary Air System Component Modelling for Engine Performance Simulations  A. Alexiou, K. Mathioudakis  GT2008-50771   
IGTI  2008  Second Vane Total Pressure Loss Due to Endwall Iceform Contouring  Ronald S. LaFleur  GT2008-50439   
IGTI  2008  Second Law Efficiency of the Rankine Bottoming Cycle of a Combined Cycle Power Plant  S. Can Gulen, Raub W. Smith  GT2008-51381   
IGTI  2008  Rotordynamic Analysis of a Power Turbine Including Support Flexibility Effects  Oscar De Santiago, Edward Abraham  GT2008-50900   
IGTI  2008  Rotating Stall Inceptions From Spike and Rotating Instability in a Variable-Pitch Axial-Flow Fan  Takahiro Nishioka; Toshio Kanno; Hiroshi Hayami  GT2008-51466   
IGTI  2008  Reynolds Stress Calculations for Pre-Transition Boundary Layers With Turbulent Free Streams  R. E. Mayle, A. Schulz, H.-J. Bauer  GT2008-50109   
IGTI  2008  Review of Metrics and Assignment of Confidence Intervals for Health Management of Gas Turbine Engines  Craig R. Davison, Jeff W. Bird  GT2008-50849   
IGTI  2008  Review and Analysis of Bluff Body Flame Stabilization Data  Sajjad A. Husain, Tim C. Lieuwen, Ganesh Nair, Santosh Shanbhogue  GT2008-50375   
IGTI  2008  Researches of Similitude Theory for Axial Flow Helium Compressor  Rongkai Zhu, Qun Zheng, Guoqiang Yue; Jiguo Zou  GT2008-50937   
IGTI  2008  Research on the Tip Sections of a Long Turbine Blade  David Simurda, Martin Luxa; Pavel Safarik; Jaroslav Synac  GT2008-50096   
IGTI  2008  Research on Circumferential Fluid Pressure Distribution and Whirl Stability of Rotor-Bearing System  Ce Chen, Jinfu Yang, Chaoqun Nie; Ying Cui, Daren Yu; Shengbo Yang; Kunx Kun, Zhongguang Fu  GT2008-50882   
IGTI  2008  Research of a Supersonic Axial Vaneless Rotor-Rotor Turbine  Xiangjun Fang, Si-Yong Liu, Ping Wang, Shui-Yan Lv, Wei-Jun Zhang  GT2008-50509   
IGTI  2008  Removing Tool Marks for Impellers in Five-Axis Machining With Improved Interference-Free Tool Paths  Der-Min Tsay, Hsin-Pao Chen, Hsin-Hung Kuo  GT2008-50205   
IGTI  2008  Remaining Life Assessment of Power Turbine Disks  H. Jin, P. Lowden, R. Pistor  GT2008-51010   
IGTI  2008  Relight Envelope of a Military Gas Turbine Engine: An Experimental Study  R. K. Mishra, G. Gouda, B. S. Vedaprakash  GT2008-50256   
IGTI  2008  Reliable Sub-5 ppm NOx Emissions: Field Experience on GE's E-Class Industrial Gas Turbine Fleet  Krishna K. Venkataraman, Larry L. Thomas, Derrick W. Simons, Predrag Popovic  GT2008-51399   
IGTI  2008  Relationship of Influence Coefficients Between Static-Couple and Multi-Plane Methods on Two-Plane Balancing  John J. Yu  GT2008-50463   
IGTI  2008  Refitting of Exhaust Diffuser of Industrial Gas Turbine  Vladimir Vassiliev, Stefan Irmisch, Matthias Rothbrust  GT2008-50165   
IGTI  2008  Refinement of Physics Based Approach Used in the Prediction of Impeller Rotordynamic Forces for Centrifugal Compressors  J. Jeffrey Moore, David L. Ransom  GT2008-51484   
IGTI  2008  Reduction of Multi-Stage Disk Models: Application to an Industrial Rotor  Arnaud Sternchuss, Etienne Balmes; Pierrick Jean, Jean-Pierre Lombard  GT2008-50580   
IGTI  2008  Reduction of Fan and Compressor Wake Defect Using Plasma Actuation for Tonal Noise Reduction  Sebastien Lemire, Huu Duc Vo  GT2008-50821   
IGTI  2008  Reducing CO2 Emissions From a Coal Fired Power Plant by Using a Molten Carbonate Fuel Cell  Jaroslaw Milewski, Andrzej Miller, Janusz Lewandowski  GT2008-50100   
IGTI  2008  Redesigning Annular Turbine Blade Rows Using a Viscous-Inviscid Inverse Design Method  J. C. Pascoa, A. C. Mendes; L. M. C. Gato  GT2008-50313   
IGTI  2008  Redesign of a Low Speed Turbine Stage Using a New Viscous Inverse Design Method  Benedikt Roidl, Wahid Ghaly  GT2008-51468   
IGTI  2008  Recovery of Automobile Engine Exhaust Energy  Willem Jansen, Arnold M. Heitmann; Masanori Hanawa  GT2008-50801   
IGTI  2008  Range of Variability in the Dynamics of Semi-Cylindrical Friction Dampers for Turbine Blades  Stefano Zucca, Daniele Botto, Muzio M. Gola  GT2008-51058   
IGTI  2008  Radiation Bench-Marking in a Model Combustor  Lei-Yong Jiang, Ian Campbell  GT2008-50179   
IGTI  2008  Radial Swirlers and Mixing Tube Assembly Aerodynamics and Performance Parameters Evaluation: Part 2 -- LDV Measurements at the Mixing Tube Outlet  Edward Canepa; Pasquale Di Martino; Davide Lengani, Marina Ubaldi, Pietro Zunino  GT2008-51221   
IGTI  2008  Radial Swirlers and Mixing Tube Assembly Aerodynamics and Performance Parameters Evaluation: Part 1 -- Hot-Wire Measurements in the Swirler Exit Plane  Edward Canepa; Pasquale Di Martino; Davide Lengani, Marina Ubaldi, Pietro Zunino  GT2008-51213   
IGTI  2008  Radial Swirler Designs for Ultra-Low NOx Gas Turbine Combustors  Gordon E. Andrews, Nick Escott, Michael C. Mkpadi  GT2008-50406   
IGTI  2008  Prototype Design of a Two-Stage High-Speed Motor Driven Air Compressor  Jari L. H. Backman; Juha Saari; Teemu Turunen-Saaresti  GT2008-51233   
IGTI  2008  Prospects for Sub Sea Wet Gas Compression  Lars Brenne, Tor Bjorge; Lars E. Bakken, Oyvind Hundseid  GT2008-51158   
IGTI  2008  Proposal of United Combustion Model for Premixed and Diffusion Flames and its Evaluation  Shin Ichi Inage  GT2008-50233   
IGTI  2008  Proposal of a Novel Multi-Functional Energy System for Cogeneration of Coke, Hydrogen and Power  Hongguang Jin, Shien Sun, Wei Han, Lin Gao  GT2008-50676   
IGTI  2008  Property Risk Assessment for Combined Cycle Power Plants  G. J. Orme; M. Venturini  GT2008-50586   
IGTI  2008  Properties, Characteristics, and Combustion Performance of Sasol Fully Synthetic Jet Fuel  Clifford A. Moses; Pietrus N. J. Roets  GT2008-50545   
IGTI  2008  Probabilistic Treatment of Aircraft Engine Usage  M. P. Enright, S. J. Hudak, R. C. McClung  GT2008-51393   
IGTI  2008  Probabilistic Analysis on Turbine Disk Under LCF-Creep  Dianyin Hu, Rongqiao Wang  GT2008-50722   
IGTI  2008  Probabilistic Analysis of Accelerated Life Tests for Thermal Barrier Coatings  Heinz Riesch-Oppermann; Patricia Hulsmeier  GT2008-50456   
IGTI  2008  Pressure Dependence of Soot Formation in Diffusion Flames  Hyun I. Joo, Omer L. Gulder  GT2008-50437   
IGTI  2008  Preliminary Design Optimization of Impingement Cooled Turbine Airfoils  Robert F. Bergholz  GT2008-50704   
IGTI  2008  Preliminary Design and Projected Performance for Intercooled-Recuperated Microturbine  Thomas L. Wolf, James B. Kesseli, James S. Nash  GT2008-50527   
IGTI  2008  Predictions of Thermal and Hydrodynamic Characteristics of a Single Circular Micro-Jet Impinging on a Flat Plate  Marcel Leon De Paz, B. A. Jubran  GT2008-50490   
IGTI  2008  Prediction of Thermoacoustic Instability in Combustion Chamber Equipped With Passive Dampers  S. M. Camporeale, B. Fortunato, M. Mastrovito  GT2008-51387   
IGTI  2008  Prediction of Inter-Turbine Burner (ITB) Performance With Curved Radial Vane Cavity at Various Equivalence Ratios  Hugh J. Thornburg; Balu Sekar, Joseph Zelina; Charlie Lin, Richard Holder  GT2008-50192   
IGTI  2008  Prediction of Heat Transfer and Flow Transition on Transonic Turbine Airfoils Under High Freestream Turbulence  Jiang Luo, Eli H. Razinsky  GT2008-50868   
IGTI  2008  Prediction of Evaporative Effects Within the Blading of an Industrial Axial Compressor  Charles Matz, Wolfgang Kappis, Giovanni Cataldi; Gerd Mundinger; Eivind Helland; Stefan Bischoff; Matthias Ripken  GT2008-50166   
IGTI  2008  Predicting Separation and Transitional Flow in Turbine Blades at Low Reynolds Numbers  Darius Sanders, Walter F. O'Brien; Rolf Sondergaard, Marc D. Polanka, Douglas C. Rabe  GT2008-50283   
IGTI  2008  Pre Stall Iinstability Distribution Over a Transonic Compressor Rotor  A. J. Gannon, G. V. Hobson  GT2008-51512   
IGTI  2008  Power Augmentation Study of an Existing Combined Cycle Power Plant by Overspray Inlet Fogging  Hsiao-Wei D. Chiang, Pai-Yi Wang, Hsin-Lung Lee  GT2008-50058   
IGTI  2008  Planar Laser Diagnostics at High Repetition Rates: Acquisition and Analysis of Transient Combustion Processes  Christof Kittler, Benjamin Bohm; Isaac Boxx, Wolfgang Meier; Samer F. Ahmed, Epaminondas Mastorakos; Andreas Dreizler  GT2008-50152   
IGTI  2008  PIV Investigation of a High Speed Centrifugal Compressor Diffuser: Spanwise and Loading Variation  Sanford Fleeter, Beni Cukurel, Patrick B. Lawless  GT2008-51321   
IGTI  2008  PGT25+Gas Turbine Development: Validation and Operating Experience  Roger De Meo, Michele D'Ercole, Alessandro Russo, Francesco Gamberi, Francesco Gravame; David Mucz  GT2008-50159   
IGTI  2008  Performing Heat Transfer Experiments in Blade Cooling Circuits Using a Transient Technique With Thermochromic Liquid Crystals  Rico Poser, Jens von Wolfersdorf; Ewald Lutum, Klaus Semmler  GT2008-50364   
IGTI  2008  Performance Research of High Temperature Compact Offset Strip Fin Heat Exchanger  Lijin Wang, Huisheng Zhang, Shilie Weng, Wenguang Lin  GT2008-50395   
IGTI  2008  Performance Prediction of Centrifugal Impellers Using a Two-Zone Model  Ian Britton, J. E. Donald Gauthier  GT2008-51530   
IGTI  2008  Performance Predicting Modeling of Axial-Flow Compressor at Design and Off-Design Conditions  Ali Madadi, Ali Hajilouy Benisi  GT2008-50550   
IGTI  2008  Performance Optimization of a Modified Wells Turbine Using Non-Symmetric Airfoil Blades  M. H. Mohamed, G. Janiga, D. Thevenin  GT2008-50815   
IGTI  2008  Performance of a Water Compensated Compressed Air Energy Storage System  Gianmario L. Arnulfi; Martino Marini  GT2008-50627   
IGTI  2008  Performance Improvement of Centrifugal Compressor Impellers by Optimizing Blade-Loading Distribution  Manabu Yagi; Tadaharu Kishibe; Takanori Shibata; Hideo Nishida, Hiromi Kobayashi  GT2008-51025   
IGTI  2008  Performance Comparison of More Electric Engine Configurations  Antoon Pluijms; Borys Chibisov; Klaus-Juergen Schmidt, Karel Stastny  GT2008-50758   
IGTI  2008  Performance and Short Length-Scale Disturbance Generation in an Axial Compressor With Non-Uniform Tip Clearance  Scott C. Morris, Joshua D. Cameron, Matthew A. Bennington; G. Scott McNulty; Aspi Wadia  GT2008-51372   
IGTI  2008  Performance and Cost Analysis of Advanced Gas Turbine Cycles With Pre-Combustion CO2 Capture  Stephanie Hoffmann, Michael Bartlett, Matthias Finkenrath, Andrei Evulet; Tord Peter Ursin  GT2008-51027   
IGTI  2008  Performance Analysis and Optimal Design of Heat Exchangers Used in a High Temperature and High Pressure System  Byung Ik Choi, Kui Soon Kim, Man Yeong Ha, Ji Hwan Jeong; Jong Rae Cho; Torbjorn Lindquist, Philip P. Walsh  GT2008-50511   
IGTI  2008  Performance Analysis and Comparison of Hybrid SOFC-GT Cycles Fuelled With Methanol  Daniele Fiaschi, Giampaolo Manfrida, Stefano Anselmi  GT2008-51367   
IGTI  2008  Passive Control of the Inlet Acoustic Boundary of a Swirled Turbulent Burner  Nicolas Tran, S. Ducruix, T. Schuller  GT2008-50425   
IGTI  2008  Part-Load Performance of MCFC/APT Hybrid Power System  Y. Tsujikawa, Ken-ichi Kaneko, T. Yamauchi; S. Katsura; S. Terashima  GT2008-51444   
IGTI  2008  Partload Fuel Economy Characteristics of 300kW Class Gas Turbines  Colin Rodgers; Aubrey Stone  GT2008-50282   
IGTI  2008  Particulate Monitor for Gas Turbine Cooling Air  Richard H. Bruce, Francisco Dovali-Solis; Robert W. Baxter  GT2008-51135   
IGTI  2008  Parametric Thermodynamic Analysis of a Solid Oxide Fuel Cell Gas Turbine System Design Space  Jacob Brouwer, Brian Tarroja, Fabian Mueller, Jim Maclay  GT2008-51518   
IGTI  2008  Parametric Study of On-Line Compressor Washing Systems Using CFD Analysis  Victor Litinetski, Alexander Litinetsky, Yakov Hain; Alexander Gutman  GT2008-50423   
IGTI  2008  Parametric Analysis of Variable Nacelle Nozzle Throat Area Using Warped Chevrons  B. Sloan, S. Spence, J. Wang, S. Raghunathan  GT2008-51265   
IGTI  2008  Parametric Analysis and Optimization of a High Temperature Fuel Cell: Supercritical CO2 Turbine Hybrid System  David Sanchez, R. Chacartegui, A. Munoz, T. Sanchez  GT2008-51226   
IGTI  2008  Overspray and Interstage Fog Cooling in Compressor Using Stage-Stacking Scheme: Part 2 -- Case Study  Ting Wang, Jobaidur R. Khan  GT2008-50323   
IGTI  2008  Overspray and Interstage Fog Cooling in Compressor Using Stage-Stacking Scheme: Part 1 -- Development of Theory and Algorithm  Ting Wang, Jobaidur R. Khan  GT2008-50322   
IGTI  2008  Optimum Use of Existing Sensor Information for Gas Turbine Diagnostics  A. G. Stamatis  GT2008-50296   
IGTI  2008  Optimum Planning of Electricity Production  Giovanni Cerri, Marco Gazzino, Francesca Alessandra Iacobone, Ambra Giovannelli  GT2008-50956   
IGTI  2008  Optimum Design and Sensitivity Analysis of Axial Flow Compressor With Combination of Analytical Method, Qualitative and Quantitative Rules and Genetic Algorithm  Hiwa Khaledi; Mohsen Reza Soltani, Mohammad Bagher Ghofrani; Amir Abbas Rezaei  GT2008-51033   
IGTI  2008  Optimizing the Swiss-Roll Recuperator of an Innovative Micro Gas Turbine by a Surrogate Neural Network and the Multi-Objective DIRECT Algorithm  Yau-Zen Chang, Hsin-Yi Shih, Kao-Ting Hung  GT2008-50762   
IGTI  2008  Optimizing Mixing for Maximum Damping of Fuel-Air Ratio Oscillations in Gas Turbine Premixers  Wajid A. Chishty, Ibrahim Yimmer  GT2008-50454   
IGTI  2008  Optimization of Non-Axisymmetric Endwalls in Compressor S-Shaped Ducts  Edward M. Naylor, Cecilia Ortiz Duenas, Robert J. Miller, Howard P. Hodson  GT2008-50448   
IGTI  2008  Optimization of Intentional Mistuning Patterns for the Mitigation of the Effects of Random Mistuning  Yun Han, Marc P. Mignolet  GT2008-51439   
IGTI  2008  Optimization of a Channel Roughened by Dimples on Opposite Surfaces for Heat Transfer Enhancement  Abdus Samad, Ki-Don Lee, Kwang-Yong Kim  GT2008-50264   
IGTI  2008  Optimization of a Centrifugal Impeller Using Evolutionary Algorithms  Andreas Bartold; Franz Joos  GT2008-50805   
IGTI  2008  Optimization Design of the Geared Rotor System With Critical Speed Constraints Using the Enhanced Genetic Algorithm  T. N. Shiau, C. H. Kang, D. S. Liu, E. K. Lee; W. C. Hsu  GT2008-50754   
IGTI  2008  Optimal Mission Analysis Accounting for Engine Aging and Emissions  M. Kelaidis, N. Aretakis, A. Tsalavoutas, K. Mathioudakis  GT2008-50800   
IGTI  2008  Optimal Design of a Heat Exchanger for an Externally-Fired Microturbine in Combined Heat and Power Generation  Juha Kaikko, Lasse Koskelainen, Jari L. H. Backman, Jaakko Larjola  GT2008-51244   
IGTI  2008  Optical Transfer Function Measurements for Technically Premixed Flames  Bruno Schuermans, Felix Guethe, Wolfgang Mohr  GT2008-51500   
IGTI  2008  Open Counter: Rotating Fan Blades Optimization Based on 3D Inverse Problem Navier-Stokes Solution Method With the Aim of Tonal Noise Reduction  Victor I. Mileshin; Mikhail A. Nyukhtikov, Sergey V. Pankov, Sergey K. Shchipin, Igor K. Orekhov  GT2008-51173   
IGTI  2008  Online and Offline Vibration Analysis of Stator End Windings of Large Power Generators  Dagmar Thien, Holger Romanowski, Sebastian Strack, Stefan Kempen, Thorsten Krol, Axel Langmann  GT2008-51130   
IGTI  2008  On the Use of Actively Controlled Auxiliary Bearings in Magnetic Bearing Systems  Iain S. Cade, Patrick S. Keogh, M. Necip Sahinkaya, Clifford R. Burrows  GT2008-50831   
IGTI  2008  On the Teaching of Performance Evaluation and Assessment of a Combined Cycle Cogeneration System  A. Ozer Arnas, Daisie D. Boettner, Seth A. Norberg, Gunnar Tamm, Jason R. Whipple  GT2008-50859   
IGTI  2008  On the Service Performance of Refurbished Turbine Blades in a Power Station  H. M. Tawancy, Laui Al-Hadhrami  GT2008-50057   
IGTI  2008  On the Role of the Deterministic and Circumferential Stresses in Throughflow Calculations  J.-F. Simon; O. Leonard  GT2008-50119   
IGTI  2008  On the Prediction of Nitrogen Oxides From Gas Turbine Combustion Chambers Using Neural Networks  Marc LaViolette, Michael Strawson  GT2008-50566   
IGTI  2008  On the Numerical Prediction of Finite Length Squeeze Film Dampers Performance With Free Air Entrainment  Tilmer H. Mendez, Marco A. Ciaccia, Jorge E. Torres, Sergio Diaz  GT2008-50368   
IGTI  2008  On the Interpretation of Casing Measurements in Axial Compressors  Joshua D. Cameron, Scott C. Morris; Sean T. Barrows, Jen-Ping Chen  GT2008-51371   
IGTI  2008  On the Individual and Combined Effects of Intentional Mistuning, Coupling and Damping on the Forced Response of Bladed Disks  Changbo Yu, Jianjun Wang, Qihan Li  GT2008-50960   
IGTI  2008  On the Coupling of Designer Experience and Modularity in the Aerothermal Design of Turbomachinery  Jerome P. Jarrett, Tiziano Ghisu, Geoffrey T. Parks  GT2008-50131   
IGTI  2008  On Line Fault Detection and Isolation in Gas Turbine Combustion Chambers  Pablo Medina; Doris Saez, Roberto Roman  GT2008-51316   
IGTI  2008  On Damping Entire Bladed Disks Through Dampers on Only a Few Blades  Javier Avalos, Marc P. Mignolet  GT2008-51446   
IGTI  2008  Off Design Operation of the Multi-Fuel CHP Cycles  Wojciech Kosman  GT2008-50746   
IGTI  2008  Numerical Study of Unsteady Flow Phenomena in a Partial Admission Axial Steam Turbine  Narmin B. Hushmandi, Jiasen Hu, Jens Fridh, Torsten H. Fransson  GT2008-50538   
IGTI  2008  Numerical Study of the Thermal Development in a Rotating Cooling Passage  R. S. Amano, Jose Martinez Lucci, Krishna Guntur, B. Song  GT2008-50201   
IGTI  2008  Numerical Studies on Cavity-Inside-Cavity-Supported Flames in Ultra Compact Combustors  Viswanath R. Katta; Joseph Zelina, William M. Roquemore  GT2008-50853   
IGTI  2008  Numerical Studies of Diffuser Inlet Configurations for Small Flow Rate Radial Compressors  Zeng Qian  GT2008-50612   
IGTI  2008  Numerical Simulations of Onset of Volute Stall Inside a Centrifugal Compressor  Hua Chen; Stone Zhao; Xiao-Cheng Zhu, Zha-Hui Du; Strong Guo  GT2008-50036   
IGTI  2008  Numerical Simulation to Determine Ejection Device Geometry for Turbo-Shaft Driven Water Pump  Jeni A. Popescu, Romulus Petcu, Valeriu A. Vilag, Ion Vataman, Valentin Silivestru  GT2008-50968   
IGTI  2008  Numerical Simulation of Transonic Fan Flutter With 3D N-S CFD Code  Mizuho Aotsuka, Naoki Tsuchiya; Yasuo Horiguchi; Kazuomi Yamamoto, Osamu Nozaki  GT2008-50573   
IGTI  2008  Numerical Simulation of TOBI Flow: Analysis of the Cavity Between Seal-Plate and HPT Disc With Pumping Vanes  Anish Kumar Gupta; Douglas Ramerth; Dhinagaran Ramachandra  GT2008-50739   
IGTI  2008  Numerical Simulation of Tip Clearance Flow Control in Axial Turbine Rotor: Part 1 -- Active Flow Control of Injection From Turbine Blade Tip  Wei Li, Wei-Yang Qiao, Kai-Fu Xu, Hua-Ling Luo  GT2008-50084   
IGTI  2008  Numerical Simulation of Tip Clearance Control in Axial Turbine Rotor: Part 2 -- Passive Control of Five Different Tip Platforms  Wei Li, Wei-Yang Qiao, Kai-Fu Xu, Hua-Ling Luo  GT2008-50085   
IGTI  2008  Numerical Simulation of the Flow Pulsations Origin in Cascades of the Rear Blade Rows in a Gas Turbine Axial Compressor Using Low Calorific Fuel  Vaclav Cyrus; Jiri Polansky  GT2008-50966   
IGTI  2008  Numerical Simulation of Inter-Turbine Burner (ITB) Flows With the Inclusion of V-Gutter Flame Holders  Cheng-Xian Lin, Richard Jack Holder; Balu Sekar, Joseph Zelina; Hugh Thornburg  GT2008-50337   
IGTI  2008  Numerical Simulation of Endwall Fence on the Secondary Flow in Compressor Cascade  Jingjun Zhong, Ji-ang Han, Yanming Liu, Fu Tian  GT2008-50888   
IGTI  2008  Numerical Simulation of a Transonic Centrifugal Compressor Blade Tip Clearance Flow if Vehicle Turbocharger  Gongda Guo, Yangjun Zhang; Jianzhong Xu; Xinqian Zheng, Weilin Zhuge  GT2008-50957   
IGTI  2008  Numerical Simulation of a Padded Finger Seal  Guoqiang Yue, Qun Zheng, Rongkai Zhu  GT2008-50997   
IGTI  2008  Numerical Modelling of Flow and Heat Transfer From an Array of Jets Impinging Onto a Concave Surface Under Stationary and Rotating Conditions  Tim J. Craft, Hector Iacovides, Nor A. Mostafa  GT2008-50624   
IGTI  2008  Numerical Method for Turbomachinery Tonal Noise Generation and Radiation Simulation Using CAA Approach  Mikhail A. Nyukhtikov, Anton A. Rossikhin, Vasily V. Sgadlev, Igor A. Brailko  GT2008-51182   
IGTI  2008  Numerical Investigation on Unsteady Effects of Hot Streak on Flow and Heat Transfer in a Turbine Stage  Bai Tao An, Jian-Jun Liu; Hong-De Jiang  GT2008-50415   
IGTI  2008  Numerical Investigation on the Second Stator Boundary Layer Under Clocking Effects: Comparison of V2-f and LCL-Model  Axel Heidecke, Bernd Stoffel  GT2008-50955   
IGTI  2008  Numerical Investigation on the Originating Mechanism of Unsteadiness in Tip Leakage Flow for a Transonic Fan Rotor  Juan Du; Feng Lin; Hongwu Zhang, Jingyi Chen  GT2008-51463   
IGTI  2008  Numerical Investigation on the Effects of Self-Excited Tip Flow Unsteadiness and Blade Row Interactions on the Performance of a Low Speed Compressor Rotor  Daniel Lee, Paul D. Orkwis; Fu-Lin Tsung, William Magnuszewski, Christopher Noll, G. Scott McNulty  GT2008-51385   
IGTI  2008  Numerical Investigation of the Flow Field in a Turbine Cascade With Different Film Cooling Holes at the Leading Edge  Xiaodong Wang, Shun Kang  GT2008-50227   
IGTI  2008  Numerical Investigation of Relation Between Unsteady Behavior of Tip Leakage Vortex and Rotating Disturbance in a Transonic Axial Compressor Rotor  K. Yamada, K. Funazaki, H. Sasaki  GT2008-50779   
IGTI  2008  Numerical Investigation of Low Solidity Vaned Diffuser Performance in a High-Pressure Centrifugal Compressor: Part II -- Influence of Vane Stagger  Jong Sik Oh, Charles W. Buckley, Giri L. Agrawal  GT2008-50178   
IGTI  2008  Numerical Investigation of Fluid Flow and Heat Transfer in a Turbine Blade With Serpentine Passage and Latticework Cooling  Sheng Su, Jian-Jun Liu, Jing-Lun Fu, Jie Hu, Bai Tao An  GT2008-50392   
IGTI  2008  Numerical Investigation of Flame Flashback Into Swirling Flow  Eike Tangermann, Michael Pfitzner  GT2008-51081   
IGTI  2008  Numerical Investigation of Entropy Noise and its Acoustic Sources in Aero-Engines  Bernd Muhlbauer, Berthold Noll, Manfred Aigner  GT2008-50321   
IGTI  2008  Numerical Investigation of a Stagnation Point Reverse Flow Combustor  Yufeng Cui, Xuan Lu, Gang Xu, Chaoqun Nie, Weiguang Huang; Jianli Chen  GT2008-50729   
IGTI  2008  Numerical Investigation of a Cryogenic Liquid Turbine Performance and Flow Behavior  Wei Zhao, Jinju Sun; Hezhao Zhu; Cheng Li; Guocheng Cai, Guohong Ma  GT2008-50391   
IGTI  2008  Numerical Assessment of the Noise Signature Sidewall Contamination of a Linear Cascade With Moving Bars  Roque Corral; Manuel A. Burgos  GT2008-51380   
IGTI  2008  Numerical and Experimental Study of the Perfromance Effects of Varying Vaneless Space and Vane Solidity in Radial Inflow Turbine Stators  Alister Simpson, Stephen Spence, John Watterson  GT2008-50261   
IGTI  2008  Numerical and Experimental Study of Spray Produced by an Airblast Atomizer Under Elevated Pressure Conditions  M. Chrigui, Feras Z. Batarseh, A. Sadiki, I. Roisman, C. Tropea  GT2008-51305   
IGTI  2008  Numerical and Experimental Study of Active Flutter Suppression With Piezoelectric Device for Transonic Cascade  Toshinori Watanabe; Junichi Kazawa; Seiji Uzawa; Benjamin Keim  GT2008-51467   
IGTI  2008  Numerical and Experimental Studies on Separated Boundary Layers Over Ultra-High Lift Low-Pressure Turbine Cascade Airfoils With Variable Solidity: Effects of Free-Stream Turbulence  Ken-Ichi Funazaki, Kazutoyo Yamada, Yasuhiro Chiba, Nozomi Tanaka  GT2008-50718   
IGTI  2008  Numerical and Experimental Investigation on a Low-Speed Compressor Cascade With Circulation Control  S. Fischer, H. Saathoff, R. Radespiel  GT2008-50302   
IGTI  2008  Numerical and Experimental Investigation of Transient Response of Primary Surface Recuperator Due to Flow Rate Step  Zhenyu Liu, Yongkang Su, Huier Cheng  GT2008-50028   
IGTI  2008  Numerical and Experimental Investigation of the Flow and Performance Characteristics of Twin-Entry Radial Turbine Under Full and Partial Admission Conditions  M. R. Shahhosseini, A. Hajilouy-Benisi, M. Rad  GT2008-50397   
IGTI  2008  Numerical and Experimental Damping Prediction of a Nonlinearly Coupled Low Pressure Steam Turbine Blading  Christian Siewert; Lars Panning; Christoph Gerber, Pierre-Alain Masserey  GT2008-51073   
IGTI  2008  Numerical Analysis of Temperature Distribution of a Film-Cooled and TBC Coated Blade  Toshihiko Takahashi, Kazunori Watanabe, Tomoharu Fujii, Terutaka Fujioka  GT2008-50730   
IGTI  2008  Numerical Analysis of Spray Dispersion, Evaporation and Combustion in a Single Gas Turbine Combustor  M. Chrigui, A. Sadiki, J. Janicka  GT2008-51253   
IGTI  2008  NOx Reduction Strategy in GE10 Hydrogen-Fuelled Heavy Duty Gas Turbine  Peter Benovsky, Iarno Brunetti; Giancarlo Benelli; Paolo Gheri, Christine Leroy, Stefano Cocchi  GT2008-51270   
IGTI  2008  Novel Shrinkage-Free Structural Ceramic Materials for Gas Turbine Applications  A. V. Sudarev; V. G. Konalkov, N. F. Morozov; I. A. Ovidko; B. N. Semenov  GT2008-50549   
IGTI  2008  Novel Cycles Deployment Study for a Silent Aircraft  L. Nettis, A. Javed, G. Doulgeris, S. O. T. Ogaji, P. Pilidis, F. De Bellis  GT2008-50949   
IGTI  2008  Novel Concepts for the Compression of Large Volumes of Carbon Dioxide  J. Jeff Moore, Marybeth G. Nored  GT2008-50924   
IGTI  2008  Novel 2D Unsteady Heat Conduction Calculation in a Cooled Rotor: Ventilation Preheating -- Blowdown Flux  J. P. Solano, G. Paniagua, A. de la Loma  GT2008-51308   
IGTI  2008  Nonlinear Vibration Analysis of Gas Turbine Bladings With Shroud Coupling  Andreas Hohl, Christian Siewert, Lars Panning; Andreas Kayser  GT2008-50787   
IGTI  2008  Nonlinear Vibration Analysis of an Unbalanced Flexible Rotor Supported by Ball Bearings With Radial Internal Clearance  T. C. Gupta; K. Gupta; D. K. Sehgal  GT2008-51204   
IGTI  2008  Nonlinear Stochastic Dynamics: Chaos and Reliability Analysis for Single Degree Freedom Model of a Rotor Blade  Pankaj Kumar; S. Narayanan  GT2008-50736   
IGTI  2008  Nonlinear Numerical Prediction of Gas Foil Bearings Stability and Unbalanced Response  Sebastien Le Lez, Mihai Arghir, Jean Frene  GT2008-50641   
IGTI  2008  Non-Linear Modal Analysis for Bladed Disks With Friction Contact Interfaces  Denis Laxalde, Loic Salles, Laurent Blanc, Fabrice Thouverez  GT2008-50860   
IGTI  2008  Nonlinear Modal Analysis and Energy Localization in a Bladed Disk Assembly  F. Georgiades, M. Peeters, G. Kerschen, J. C. Golinval; M. Ruzzene  GT2008-51388   
IGTI  2008  Nonlinear Identification of Mechanical Parameters in a Squeeze Film Damper with Integral Mechanical Seal  Adolfo Delgado, Luis San Andres  GT2008-50528   
IGTI  2008  Nonlinear Dynamic Behaviors of Rotor Systems for Ball End Milling  Ting-Nung Shiau, Kuan Hung Chen, K. H. Huang  GT2008-51461   
IGTI  2008  Noise Generated by a Lifted Flame in a Vitiated Co-Flow  Robert Z. Szasz, Christophe Duwig, Laszlo Fuchs  GT2008-51186   
IGTI  2008  Near Field of Film Cooling Jet Issued Into a Flat Plate Boundary Layer: LES Study  Yulia V. Peet, Sanjiva K. Lele  GT2008-50420   
IGTI  2008  Nano-Technology Coatings for Erosion Protection of Turbine Components  V. P. Swami Swaminathan; Ronghua Wei; David W. Gandy  GT2008-50713   
IGTI  2008  Multi-Stage Compressor Model for Transient Performance Simulations  Holger Schulte; Arne Weckend; Klaus-Jurgen Schmidt; Stephan Staudacher  GT2008-51159   
IGTI  2008  Multi-Purpose Model of SOFC Hybrid Systems  Francesco Ghigliazza, Alberto Traverso; Mario L. Ferrari, John Wingate  GT2008-50562   
IGTI  2008  Multi-Objective Robust Design Optimization and Knowledge Mining of a Centrifugal Fan That Takes Dimensional Uncertainty Into Account  Kazuyuki Sugimura; Shinkyu Jeong, Shigeru Obayashi; Takeshi Kimura  GT2008-51301   
IGTI  2008  Multi-Objective Optimization in Axial Compressor Design Using a Linked CFD-Solver  Kai Becker, Martin Lawerenz; Christian Voss, Reinhard Monig  GT2008-51131   
IGTI  2008  Multidisciplinary Optimization of Airfoil Cooling Structure  Grzegorz Nowak  GT2008-50776   
IGTI  2008  Multi Objective Aerodynamic Optimization of Axial Turbine Blades Using a Novel Multi-Level Genetic Algorithm  Ozhan Oksuz, Ibrahim Sinan Akmandor  GT2008-50521   
IGTI  2008  Monitoring of HRSG Performance in Large Size Combined Cycle Power Plants  Silvio Cafaro, Alberto Traverso, Aristide F. Massardo  GT2008-50648   
IGTI  2008  Modelling Unsteady Transition Effects in an Axial Compressor  Adam D. Beevers, Joao Amaral-Teixeira; Roger Wells  GT2008-51257   
IGTI  2008  Modelling of Variables Gas Properties and Compositions in Turbomachinery Flow Simulations  Luca Di Mare  GT2008-51085   
IGTI  2008  Modelling of Film Cooling for Turbine Blade Design  B. Tartinville, Ch. Hirsch  GT2008-50316   
IGTI  2008  Modeling of Variable Inlet Guide Vanes Affects on a One Shift Industrial Gas Turbine Used in a Combined Cycle Application  Cesar Celis; Rafael S. Barbosa, Sandro B. Ferreira, Paula de M. Ribeiro Pinto  GT2008-50076   
IGTI  2008  Modeling of Turbulent Combustion Process and Lean Blow Out Using Combined Approach  Yu. G. Kutsenko, S. F. Onegin, L. Y. Gomzikov  GT2008-50289   
IGTI  2008  Modeling of Turbulent Combustion and Radiative Heat Transfer in a Object-Oriented CFD Code for Gas Turbine Application  Matteo Cerutti, Antonio Andreini, Bruno Facchini, Luca Mangani  GT2008-51117   
IGTI  2008  Modeling and Experimental Evaluation on Torque Loss in Turbine Test Rig  Jeong-Seek Kang, Bong-Jun Cha, Iee-Ki Ahn  GT2008-50341   
IGTI  2008  Modeling and Analysis of Power Conversion System for High Temperature Gas Cooled Reactor With Cogeneration  Ali Afrazeh; Hiwa Khaledi; Mohammad Bagher Ghofrani  GT2008-50952   
IGTI  2008  Model of a Coal Fired IGCC Process With Hydrogen Membrane Reactor and Capture of CO2  Frank Sander, Roland Span  GT2008-50913   
IGTI  2008  Model Based Compressor Fault Identification Using Stage Stacking Technique and Nonlinear Diagnostic Systems  Hiwa Khaledi; Seyyed Hamid Reza Hosseini, Mohammad Bagher Ghofrani  GT2008-51032   
IGTI  2008  Model Based Active Combustion Control Concept for Reduction of Pulsations and NOx Emissions in Lean Premixed Gas Turbine Combustors  Ernst Schneider, Stephan Staudacher; Bruno Schuermans, Haiwen Ye  GT2008-50326   
IGTI  2008  Mixing Planes Revisited: A Steady Mixing Plane Approach Designed to Combine High Levels of Conservation and Robustness  D. Graham Holmes  GT2008-51296   
IGTI  2008  Mistuning Analyses of a Bladed Disk: Pole-Zero and Modal Approaches  Alok Sinha  GT2008-50191   
IGTI  2008  Misalignment in Gas Foil Journal Bearings: An Experimental Study  Samuel A. Howard  GT2008-50806   
IGTI  2008  Microwave Turbine Tip Clearance Measuring System for Gas Turbine Engines  Aleksandr Maslovskiy  GT2008-50354   
IGTI  2008  Micro Mixing Fuel Injectors for Low Emissions Hydrogen Combustion  Steve R. Hernandez, Qing Wang, Vincent McDonell; Brian Hollon, Erlendur Steinthorsson, Adel Mansour  GT2008-50854   
IGTI  2008  Micro Gas Turbine Test Rig for Hybrid Power Plant Application  Martina Hohloch, Axel Widenhorn, Dominik Lebkuchner, Tobias Panne, Manfred Aigner  GT2008-50443   
IGTI  2008  Micro Combined Plant With Gas Turbine and Organic Cycle  Gabriele Comodi, Flavio Caresana, Leonardo Pelagalli, Sandro Vagni  GT2008-51103   
IGTI  2008  Methods of Extrapolating Low Cycle Fatigue Data to High Stress Amplitudes  David Radonovich; Ali P. Gordon  GT2008-50365   
IGTI  2008  Method for Sensitivity Analysis of Resonance Forced Response of Bladed Discs With Nonlinear Contact Interfaces  E. P. Petrov  GT2008-50481   
IGTI  2008  Mesh Generation for Conjugate Heat Transfer Analysis of a Cooled High Pressure Turbine Stage  Colinda Goormans-Francke, Guy Carabin, Charles Hirsch  GT2008-50660   
IGTI  2008  Measurements Versus Predictions for the Rotordynamic Characteristics of a 5-Pad, Rocker-Pivot, Tilting-Pad Bearing in Load Between Pad Configuration  Dara W. Childs, Clint R. Carter  GT2008-50069   
IGTI  2008  Measurements Versus Predictions for Rotordynamic Characteristics of a Flexure Pivot-Pad Tilting Pad Bearing in an LBP Condition at Higher Unit Loads  Dara Childs, J. Eric Hensley  GT2008-50066   
IGTI  2008  Measurements Versus Predictions for Rotordynamic and Leakage Characteristics of a Convergent-Tapered, Honeycomb-Stator/Smooth-Rotor Annular Gas Seal  Dara W. Childs, Daniel E. van der Velde  GT2008-50068   
IGTI  2008  Measurements of Secondary Losses in a Turbine Cascade With the Implementation of Non-Axisymmetric Endwall Contouring  D. C. Knezevici, S. A. Sjolander; T. J. Praisner, E. Allen-Bradley, E. A. Grover  GT2008-51311   
IGTI  2008  Measurements of Leakage and Power Loss in a Hybrid Brush Seal  Luis San Andres, Jose Baker, Adolfo Delgado  GT2008-50532   
IGTI  2008  Measurement Error Influence on Gas Turbine Operability for Condition-Based Maintenance and Reliability/Availability Improvement  Ilaria Michelizzi, Ever Avriel Fadlun, Marco De Iaco  GT2008-50749   
IGTI  2008  Measured and Predicted Performance of a High Pressure Ratio Supersonic Compressor Rotor  Allan D. Grosvenor, David A. Taylor, Jonathan R. Bucher, Michael J. Aarnio, Paul M. Brown, Robert D. Draper, P. Shawn Lawlor  GT2008-50150   
IGTI  2008  Material Temperature Limits and Convection Flow Requirements  Ronald S. LaFleur  GT2008-50432   
IGTI  2008  Marine Gas Turbine Propulsion System Controls: An Integrated Approach  Joseph H. McMurry; Thomas B. Keefer; Lorenzo Previsani  GT2008-50858   
IGTI  2008  Marine Gas Turbine Package for the Korean Navy PKX Program  Glenn McAndrews; Naytoe Aye; Bob Mendenhall  GT2008-50098   
IGTI  2008  Maps of Vibrational Symptoms of Bearing Misalignment Defects in Large Power Turboset  Jozef Rybczynski  GT2008-50558   
IGTI  2008  Manufacturing Optimization for Bondcoat/Thermal Barrier Coating System  Hans-Peter Bossmann, Sharath Bachegowda, Alexander Schnell  GT2008-51366   
IGTI  2008  Low Speed Balancing for Supercritical Shafting in Gas Turbines  Peter D. Hylton  GT2008-50077   
IGTI  2008  Low Solidity Cascade Diffuser and Scroll Optimization for Centrifugal Compressors  Florin Iancu, John Trevino, Steven Sommer  GT2008-50132   
IGTI  2008  Low Leakage Designs for Rotor Teeth Honeycomb Lands in Labyrinth Seals  Hasham H. Chougule; Douglas Ramerth; Dhinagaran Ramachandra  GT2008-51024   
IGTI  2008  Low Frequency Noise Contamination in Fan Model Testing  Clifford A. Brown, Nicholas A. Schifer  GT2008-50850   
IGTI  2008  Low Emissions Combustion System Development for the GE Energy High Hydrogen Turbine Program  Willy Ziminsky, John Lipinski, Ben Lacy; Bala Varatharajan, Ertan Yilmaz, Justin Brumberg  GT2008-50823   
IGTI  2008  Low CO2 Combustion System Retrofits for Existing Heavy Duty Gas Turbines  Peter J. Stuttaford, Khalid Oumejjoud  GT2008-50814   
IGTI  2008  Losses in High-Speed Permanent Magnet Machines Used in Microturbine Applications  Co Huynh, Liping Zheng, Dipjyoti Acharya  GT2008-50715   
IGTI  2008  Loss Reduction in Compressor Cascades by Means of Passive Flow Control  A. Hergt, R. Meyer; M. W. Mueller; K. Engel  GT2008-50357   
IGTI  2008  Long-Term Microturbine Exposure of an Advanced Alloy for Microturbine Primary Surface Recuperators  Wendy J. Matthews; Karren L. More, Larry R. Walker  GT2008-50037   
IGTI  2008  Liquid Fuel Flameless Combustion RANS Simulation  Patrick Le Clercq; Mark Schlieper; Berthold Noll, Manfred Aigner  GT2008-50552   
IGTI  2008  Lifing of Turbomachinery Blades: A Process Driven Approach  J. S. Rao, R. Narayan, M. C. Ranjith  GT2008-50231   
IGTI  2008  Leveraging the Strengths of Commercial Finite Element Modeling Codes and Custom Engineered Software to Solve Atypical Rotordynamic Problems  David Ransom  GT2008-50363   
IGTI  2008  Letterbox Trailing Edge Heat Transfer: Effects of Blowing Rate, Reynolds Number, and External Turbulence on Heat Transfer and Film Cooling Effectiveness  N. J. Fiala, I. Jaswal, F. E. Ames  GT2008-50474   
IGTI  2008  LES of Vortex Breakdown in Swirled Bluff-Body Flows  Clemens Olbricht, Frederik Hahn, Johannes Janicka  GT2008-50266   
IGTI  2008  LES and Experimental Study of Flow Features in Humid-Air Combustion Chamber With Non-Premixed Circular-Disc Stabilized Flames  Peiqing Guo, Shusheng Zang, Bing Ge  GT2008-50940   
IGTI  2008  Lean Premixed Combustion of Undiluted Syngas at Gas Turbine Relevant Conditions: NOx Emissions and Lean Operational Limits  S. Daniele, P. Jansohn; K. Boulouchos  GT2008-50265   
IGTI  2008  Lean and Straight Nozzle Vanes in a Variable Geometry Turbine: A Steady and Pulsating Flow Investigation  Srithar Rajoo; R. F. Martinez-Botas  GT2008-50828   
IGTI  2008  Leading Edge Cooling Performance of an Integrated Cooling Configuration  Takahiro Bamba, Takao Kumagai, Fujio Mimura, Takashi Yamane, Yoshitaka Fukuyama; Taiki Usui, Toyoaki Yoshida  GT2008-50574   
IGTI  2008  LCAC Main Engine Installed Performance  Benjamin Canilang, David Zipkin  GT2008-50639   
IGTI  2008  Latent Heat Recovery and Performance Studies for an Open Cycle Absorption Heat Transformer  Fan Wei, Yunhan Xiao, Shijie Zhang  GT2008-51105   
IGTI  2008  Laser Based Study of Spray Auto-Ignition in a Generic Mixing Duct  O. Hinkeldey; M. Cano-Wolff; P. Schober; R. Koch, H.-J. Bauer  GT2008-50143   
IGTI  2008  Large Eddy Simulations of Film Cooling Flow Fields From Cylindrical and Shaped Holes  D. H. Leedom, S. Acharya  GT2008-51009   
IGTI  2008  Large Eddy Simulation of Premixed Combustion With a Thickened-Flame Approach  Ashoke De, Sumanta Acharya  GT2008-51320   
IGTI  2008  Large Eddy Simulation of Film Cooling Flow Ejected in a Shallow Cavity  Peter Renze, Wolfgang Schroder, Matthias Meinke  GT2008-50120   
IGTI  2008  Laminar Flame Speed Measurements of H2/CO/CO2 Mixtures Up to 15 atm and 600 K Preheat Temperature  J. Natarajan, Y. Kochar, T. Lieuwen, J. Seitzman  GT2008-51364   
IGTI  2008  Laboratory Investigations of Low-Swirl Injectors Operating With Syngases  David Littlejohn, Robert K. Cheng; D. R. Noble, Tim Lieuwen  GT2008-51298   
IGTI  2008  Knowledge Based Prognostics Models for Gas Turbine Core Components  Pontus Slottner, Mathias Warja  GT2008-51276   
IGTI  2008  Jet Shear Layer Size and Number Influences on Grid Plate Direct Fuel Injection Shear Layer Mixing Low NOx Gas Turbine Combustion With Fuel Staging for Power Turn Down  Gordon E. Andrews, S. A. R. Ahmed  GT2008-50408   
IGTI  2008  Jet Noise Reduction for High Speed Exhaust Systems  Steven Martens, Ludwig Haber  GT2008-50455   
IGTI  2008  Investigations on the Discharge and Total Temperature Increase Characteristics in the Labyrinth Seals With Honeycomb and Smooth Lands  Xin Yan, Jun Li, Liming Song, Zhenping Feng  GT2008-50399   
IGTI  2008  Investigations at the Over-Tip Casing of a High Pressure Turbine Including Off-Design Conditions and Heat Transfer Correlations  Bart van Duikeren; Andreas Heselhaus  GT2008-50625   
IGTI  2008  Investigation on Flow Characteristic and Stability of Control Valves for Steam Turbine  Guanwei Liu, Shunsen Wang, Jingru Mao, Hui Guo, Zhenping Feng, Xiaowei Xiang  GT2008-51016   
IGTI  2008  Investigation of Tip-Flow Based Stall Criteria Using Rotor Casing Visualization  Matthew A. Bennington, Joshua D. Cameron, Scott C. Morris; Jen-Ping Chen; Camille Legault; Sean T. Barrows; G. Scott McNultly, Aspi R. Wadia  GT2008-51319   
IGTI  2008  Investigation of the Unsteady Aerodynamics of an Annular Combustor Using PIV and LES  Adrian Spencer; David Hollis; Sara Gashi  GT2008-50277   
IGTI  2008  Investigation of the Secondary Flow Structure in the Mixed Flow Turbine for a High Pressure Ratio Turbocharger  Li Chen, Weilin Zhuge, Yangjun Zhang; Shuyong Zhang, Jizhong Zhang  GT2008-50941   
IGTI  2008  Investigation of the Flow in Centrifugal Compressor Volute  R. S. Amano, C. Xu  GT2008-50936   
IGTI  2008  Investigation of Sand Blocking Within Impingement and Film-Cooling Holes  N. D. Cardwell; S. W. Burd; K. A. Thole  GT2008-51351   
IGTI  2008  Investigation of Multi-Material Bird Models for Predicting Impact Loads  Lakshmi S. Nizampatnam; Walter J. Horn  GT2008-51005   
IGTI  2008  Investigation of Multi-Functional Energy System (MES) for CO2 Removal  Hongguang Jin, Wei Han, Guoqiang Zhang, Hu Lin  GT2008-50513   
IGTI  2008  Investigation of Loss Generation in an Embedded Transonic Fan Stage at Several Gaps Using High Fidelity, Time-Accurate CFD  Michael G. List; Steven E. Gorrell; Mark G. Turner  GT2008-51220   
IGTI  2008  Investigation of Leakage Flow and Heat transfer in a Gas Turbine Blade Tip With Emphases on the Effect of Rotation  Dianliang Yang, Xiaobing Yu, Zhenping Feng  GT2008-51215   
IGTI  2008  Investigation of Innovative Trailing Edge Cooling Configurations With Enlarged Pedestals and Square or Semicircular Ribs: Part II -- Numerical Results  Emiliano Di Carmine, Luca Mangani, Bruno Facchini  GT2008-51048   
IGTI  2008  Investigation of Innovative Trailing Edge Cooling Configurations With Enlarged Pedestals and Square or Semicircular Ribs: Part 1 -- Experimental Results  Lorenzo Tarchi, Bruno Facchini  GT2008-51047   
IGTI  2008  Investigation of Flame Stability Characteristics of the EV Burner on the GT13E2 Engine  F. Biagioli, P. Schiessel, L. Fischer  GT2008-50274   
IGTI  2008  Investigation of Blade Tip Interaction With Casing Treatment in a Transonic Compressor: Part 2 -- Numerical Results  R. Schnell, M. Voges; M. W. Mueller; C. Zscherp; R. Monig  GT2008-50212   
IGTI  2008  Investigation of Blade Tip Interaction With Casing Treatment in a Transonic Compressor: Part 1 -- Particle Image Velocimetry  M. Voges, R. Schnell, M. W. Muller, C. Zscherp; C. Willert; R. Monig  GT2008-50210   
IGTI  2008  Investigation of an Air Supply Centrifugal Fan for Air Cushion Vehicle: Impeller Design and Validation  Yu-Tai Lee; Vineet Ahuja, Ashvin Hosangadi; Michael E. Slipper, Lawrence P. Mulvihill; Roger Birkbeck; Roderick M. Coleman  GT2008-50376   
IGTI  2008  Investigation in the Eccentricity of Spoke Centered Turbomachinery Components  Alexander K. Stumvoll, Hans-Peter Kau  GT2008-51066   
IGTI  2008  Investigating Circumferential Non-Uniformities in Throughflow Calculations Using an Harmonic Reconstruction  J. P. Thomas, O. Leonard  GT2008-50328   
IGTI  2008  Inverse Modeling Techniques for Application to Engine Transient Performance Data Matching  Harish Agarwal, Amit Kale, Srikanth Akkaram, Mahadevan Balasubramaniam; Susan Ebacher, Paul Gilleberto  GT2008-51313   
IGTI  2008  Inverse 3D Camber-Line Calculation Tool INCA-3D  C. Clemen  GT2008-50253   
IGTI  2008  Introduction of the Taurus(TM) 65 Industrial Gas Turbine for Power Generation  Theresa Brown, Simon Reynolds, George Rocha  GT2008-51328   
IGTI  2008  Internal Losses and Flow Behavior in a Turbofan Stage at Windmill  Dilip Prasad, Wesley K. Lord  GT2008-50560   
IGTI  2008  Interdependence of Discharge Behavior, Swirl Development and Total Temperature Increase in Rotating Labyrinth Seals  J. Denecke, J. Farber, K. Dullenkopf, H.-J. Bauer  GT2008-51429   
IGTI  2008  Interaction of Rotor and Casing Treatment Flow in an Axial Single-Stage Transonic Compressor With Circumferential Grooves  Martin W. Muller, Heinz-Peter Schiffer; Chunill Hah; Christoph Biela  GT2008-50135   
IGTI  2008  Integration of Thermal Stress and Lifetime Supervision System of Steam Turbine Rotors  Antonio Carnero P., Luis Serrano R.; Jesus Nebradt G., Luis Leyva M.  GT2008-51453   
IGTI  2008  Integrating Optical Sensors in Fuel Injectors for Combustion Control  Doug Myhre; Michael Cornwell; Jerry Goeke; Timothy Aadland  GT2008-51418   
IGTI  2008  Integrating MT30 Into the UK's Future Aircraft Carrier -- Power at the Heart of the Electric Propulsion System  Roy Casson  GT2008-50206   
IGTI  2008  Integrated Test and Evaluation Techniques as Applied to an Inlet Swirl Investigation Using the F109 Gas Turbine Engine  Milt Davis, Dave Beale; Yogi Sheoran  GT2008-50074   
IGTI  2008  Instability Control by Premixed Pilot Flames  Peter Albrecht, Stefanie Bade, Arnaud Lacarelle, Christian Oliver Paschereit; Ephraim Gutmark  GT2008-50255   
IGTI  2008  Instability and Transition in a Separation Bubble Under a Three-Dimensional Freestream Pressure Distribution  M. I. Yaras  GT2008-51256   
IGTI  2008  Insights Into Discrepancies Between Results of Nonlinear and Linear Vibration Analyses of Rigid Rotors on Journal Bearings  Demetrio C. Zachariadis  GT2008-51084   
IGTI  2008  Inlet Air Cooling With Overspray Applied to a Two-Stage Centrifugal Compressor  Takanori Shibata, Yasuo Takahashi, Shigeo Hatamiya  GT2008-50893   
IGTI  2008  Influence of Wake Structure on Unsteady Flow in an LP Turbine Blade Passage  S. Sarkar  GT2008-50809   
IGTI  2008  Influence of Swept Wing on Axial Steam Turbine Static Cascade Aerodynamics  Ziming Feng, Wanjin Han, Jingjun Zhong, Hongming Yan  GT2008-50403   
IGTI  2008  Influence of Stator-Rotor Interaction on the Aerothermal Performance of Recess Blade Tips  Bob Mischo; Andre Burdet; Reza S. Abhari  GT2008-50496   
IGTI  2008  Influence of Hot Streak/Airfoil Count Ratios on High Pressure Stage of a Vaneless Counter-Rotating Turbine  Qingjun Zhao, Huishe Wang, Fei Tang, Xiaolu Zhao, Jianzhong Xu  GT2008-50542   
IGTI  2008  Influence of Gap Between Casing and Variable Stator Blade on Axial Compressor Performance  Beat Ribi, Michael P. Meyer  GT2008-50301   
IGTI  2008  Influence of Force Field Direction on Pressure Sensors Calibrated at up to 12000g  Wieland Uffrecht, Erwin Kaiser  GT2008-50355   
IGTI  2008  Influence of Cooling Flow Rate Variation on Gas Turbine Blade Temperature Distributions  Fernando Z. Sierra Espinosa; Je Chin Han; J. Kubiak; S. Blake, Diganta Narzary; Areli Uribe Portugal, Fernando Cadena, H. Lara; Jesus Nebradt  GT2008-50103   
IGTI  2008  Influence of Compressor Performance Maps Shape on Wet Compression  Francesco Melino, Michele Bianchi, Antonio Peretto; Pier Ruggero Spina; Rakesh K. Bhargava  GT2008-50761   
IGTI  2008  Influence of Blade Fillets on the Performance of a 15 Stage Gas Turbine Compressor  E. Kugeler, D. Nurnberger, A. Weber; K. Engel  GT2008-50748   
IGTI  2008  Influence of Blade Deterioration on Compressor and Turbine Performance  M. Morini, M. Pinelli, P. R. Spina, M. Venturini  GT2008-50043   
IGTI  2008  Influence of Active Methods of Flow Control on Compressor Blade Cascade Flow  Milan Matejka, Pavel Safarik; Lukas Popelka; Jiri Nozicka  GT2008-51109   
IGTI  2008  Influence of a Broken-Away TBC on the Flow Structure and Wall Temperature of an Effusion Cooled Multi-Layer Plate Using the Conjugate Calculation Method  Dieter Bohn, Robert Krewinkel  GT2008-50378   
IGTI  2008  In Situ Measurement and Validation of Gaseous Species Concentrations of a Gas Turbine Model Combustor by Tunable Diode Laser Absorption Spectroscopy (TDLAS)  Christoph Hassa, Thomas Behrendt; Ajmal Mohamed, Jean-Pierre Faleni  GT2008-51258   
IGTI  2008  Improving the Turbine Cooling Conceptual Design Process  Chris Bell, P. John Clarkson, William N. Dawes  GT2008-51285   
IGTI  2008  Improving the Performance of a Bent Ejector With Inlet Swirl  Asim Maqsood, A. M. Birk  GT2008-51209   
IGTI  2008  Improving the Accuracy of Multihole Probe Measurements in Velocity Gradients  Valery Chernoray; Johan Hjarne  GT2008-50492   
IGTI  2008  Improving Efficiency of a High-Work Turbine Using Non-Axisymmetric Endwalls: Part II -- Time Resolved Flow Physics  P. Schuepbach; M. G. Rose; R. S. Abhari; T. Germain, I. Raab, J. Gier  GT2008-50470   
IGTI  2008  Improving Efficiency of a High Work Turbine Using Non-Axisymmetric Endwalls: Part I -- Endwall Design and Performance  T. Germain, M. Nagel, I. Raab; P. Schuepbach; M. Rose; R. S. Abhari  GT2008-50469   
IGTI  2008  Improving Component Life Prediction Accuracy and Reliability Through Physics Based Prognosis: A Probabilistic Turbine Blade Case Study  Ashok K. Koul, Saurabh Bhanot, Ajay Tiku; Brent Junkin  GT2008-51526   
IGTI  2008  Improvement of Performance Prediction by Automated Assimilation of Gas Turbine Component Maps  M. Zwingenberg, F.-K. Benra; K. Werner  GT2008-51068   
IGTI  2008  Improved Understanding of Blow-Down in Filament Seals  Gervas Franceschini; Terry V. Jones, David R. H. Gillespie  GT2008-51197   
IGTI  2008  Improved Performance of a Radial Turbine Through the Implementation of Back Swept Blading  Liam Barr; Stephen W. T. Spence; Paul Eynon  GT2008-50064   
IGTI  2008  Improved Performance Model of Turbocharger Centrifugal Compressor  Mingyang Yang, Xinqian Zheng, Yangjun Zhang; Zhigang Li  GT2008-50009   
IGTI  2008  Improved Film Cooling Effectiveness by Placing a Vortex Generator Downstream of Each Hole  David L. Rigby, James D. Heidmann  GT2008-51361   
IGTI  2008  Implementation and Operation of a Cogeneration Plant for Steam Injection in Oil Field  Mihai Borzea, Gheorghe Fetea, Radu Codoban  GT2008-50518   
IGTI  2008  Impedance Boundary Conditions for the Numerical Simulation of Gas Turbine Combustion Systems  Axel Widenhorn, Berthold Noll, Manfred Aigner  GT2008-50445   
IGTI  2008  Impact of Time-Resolved Entropy Measurement on a One-and-1/2-Stage Axial Turbine Performance  M. Mansour, N. Chokani, A. I. Kalfas, R. S. Abhari  GT2008-50807   
IGTI  2008  Impact of Fuel Supply Impedance on Combustion Stability of Gas Turbines  Andreas Huber, Wolfgang Polifke  GT2008-51193   
IGTI  2008  Impact of Continuous Inlet Fogging and Overspray Operation on GE 5002 Gas Turbine Life and Performance  Klaus Brun; Luis Eduardo Gonzalez; John P. Platt  GT2008-50207   
IGTI  2008  Impact of Boundary Conditions on the Reconstructed Flame Transfer Function for Gas Turbine Combustion Systems  Axel Widenhorn, Krzysztof Kostrzewa, Berthold Noll; Werner Krebs; Manfred Aigner; Michael Huth, Peter Kaufmann  GT2008-50446   
IGTI  2008  Ignition Characteristics of a Fischer-Tropsch Synthetic Jet Fuel  P. Gokulakrishnan, M. S. Klassen, R. J. Roby  GT2008-51211   
IGTI  2008  Ignition and Flame Speed Kinetics of Two Natural Gas Blends With High Levels of Heavier Hydrocarbons  Gilles Bourque; Darren Healy, Henry Curran; Christopher Zinner, Danielle Kalitan; Jaap de Vries, Christopher Aul, Eric Petersen  GT2008-51344   
IGTI  2008  Identification and Correction of Rotor Instability in an Oil-Free Gas Turbine  Daniel R. Lubell, Jonathan L. Wade, Navjot S. Chauhan, John G. Nourse  GT2008-50305   
IGTI  2008  Hybrid Gas Bearings With Controlled Supply Pressure to Eliminate Rotor Vibrations While Crossing System Critical Speeds  Luis San Andees, Keun Ryu  GT2008-50393   
IGTI  2008  Hot Streak and Vane Coolant Migration in a Downstream Rotor  Jonathan Ong, Robert J. Miller  GT2008-50971   
IGTI  2008  Hot Spots in Turboexpander Bearings: Case History, Stability Analysis, Measurements and Operational Experience  Joachim Schmied; Josef Pozivil, Joseph Walch  GT2008-51179   
IGTI  2008  Hot Oxidation Studies for the Ti-6AL-4V Alloy at Environmental Atmosphere  M. A. S. Oliveira, A. Boschetti; M. S. Vilela  GT2008-51539   
IGTI  2008  High-Fidelity Numerical Analysis of Per-Rev-Type Inlet Distortion Transfer in Multistage Fans: Part II -- Entire Component Simulation and Investigation  Jixian Yao; Steven E. Gorrell; Aspi R. Wadia  GT2008-50813   
IGTI  2008  High-Fidelity Numerical Analysis of Per-Rev-Type Inlet Distortion Transfer in Multistage Fans: Part I -- Simulations With Selected Blade Rows  Jixian Yao; Steven E. Gorrell; Aspi R. Wadia  GT2008-50812   
IGTI  2008  High Temperature, Permanent Magnet Biased, Fault Tolerant Homopolar Magnetic Bearing Development  Alan Palazzolo, Randall Tucker, Kyung-Dae Kang, Andrew Kenny, Varun Gandhi; Jinfang Liu; Andrew Provenza; Heeju Choi  GT2008-50917   
IGTI  2008  High Temperature Static and Dynamic Pressure Transducer for Combustion Instability Control Using Acoustic Low-Pass Filter Structures  Adam M. Hurst, Anthony D. Kurtz, Boaz Kochman  GT2008-51522   
IGTI  2008  High Temperature Radiation Heat Transfer Performance of Thermal Barrier Coatings With Multiple Layered Structure  Xiao Huang  GT2008-50047   
IGTI  2008  High Strength, Ductile Braze Repairs for Stationary Gas Turbine Components: Part 1  Warren Miglietti, Madeleine Du Toit  GT2008-51133   
IGTI  2008  High Efficiency Gas Turbine Based Power Cycles -- A Study of the Most Promising Solutions: Part 2 -- A Parametric Performance Evaluation  Rakesh K. Bhargava; Michele Bianchi; Stefano Campanari; Andrea De Pascale, Giorgio Negri di Montenegro, Antonio Peretto  GT2008-51277   
IGTI  2008  High Efficiency Gas Turbine Based Power Cycles -- A Study of the Most Promising Solutions: Part 1 -- A Review of the Technology  Rakesh K. Bhargava; Michele Bianchi; Stefano Campanari; Andrea De Pascale, Giorgio Negri di Montenegro, Antonio Peretto  GT2008-51275   
IGTI  2008  High Altitude Recuperated 50 kWe Turboprop Study  Colin Rodgers  GT2008-50369   
IGTI  2008  Heavy Duty Gas Turbine Fuel Flexibility  Anthony Campbell, Tim Healy, Michel Moliere, Roy Washam, Jeffrey Goldmeer, Joseph Citeno  GT2008-51368   
IGTI  2008  Heat/Mass Transfer in Rotating, Smooth, High Aspect-Ratio (4:1) Coolant Channels With Curved Walls in 90 degrees and 45 degrees Orientation  Eashwar Sethuraman, Dimitris E. Nikitopoulos, Sumanta Acharya  GT2008-50247   
IGTI  2008  Heat Transfer on Rotating Channel With Various Heights of Pin-Fin  Jun Su Park, Kyung Min Kim, Dong Hyun Lee, Hyung-Hee Cho; Minking K. Chyu  GT2008-50783   
IGTI  2008  Heat Transfer Measurements for a Film Cooled Turbine Vane Cascade  Douglas R. Thurman, Philip E. Poinsatte, James D. Heidmann  GT2008-50651   
IGTI  2008  Heat Transfer in Trailing Edge, Wedge Shaped Cooling Channels With Slot Ejection Under High Rotation Numbers  Yao-Hsien Liu, Michael Huh; Lesley M. Wright; Je Chin Han  GT2008-50343   
IGTI  2008  Heat Transfer in Radially Rotating Pin-Fin Channel at High Rotation Numbers  S. W. Chang, T. L. Yang; Tong-Miin Liou; G. F. Hong  GT2008-50514   
IGTI  2008  Heat Transfer in Leading Edge, Triangular Shaped Cooling Channels With Angled Ribs Under High Rotation Numbers  Yao-Hsien Liu, Michael Huh; Dong-Ho Rhee; Je Chin Han; Hee Koo Moon  GT2008-50344   
IGTI  2008  Heat Transfer in an Impingement Cooling System for Turbine Airfoils With a Sparse Distribution of Holes  Jose Javier Alvarez; Pedro de la Calzada; S. T. Kohler  GT2008-50141   
IGTI  2008  Heat Transfer Coefficients of Film Cooling on a Rotating Turbine Blade Model: Part II -- Effects of Reynolds Number and Rotation Number  Guoqiang Xu, Bin Yang, Zhi Tao, Shuiting Ding, Zhenming Zhao, Hongwei Wu  GT2008-50535   
IGTI  2008  Heat Transfer Coefficients of Film Cooling on a Rotating Turbine Blade Model: Part I -- Effect of Blowing Ratio  Zhi Tao, Zhenming Zhao, Shuiting Ding, Guoqiang Xu, Bin Yang, Hongwei Wu  GT2008-50533   
IGTI  2008  Heat Transfer Augmentation Downstream of Rows of Various Dimple Geometries on the Suction Side of a Gas Turbine Airfoil  Jason E. Dees, David G. Bogard; Ronald S. Bunker  GT2008-51269   
IGTI  2008  Heat Transfer and Surface Friction Downstream of a Dual Array of Dimples of Different Shape  Artem Khalatov, Vitaliy Onishchenko  GT2008-50022   
IGTI  2008  Heat Transfer and Pressure Measurements in a Lattice-Cooled Trailing Edge of a Turbine Airfoil  Krishnendu Saha, Shengmin Guo, Sumanta Acharya; Chiyuki Nakamata  GT2008-51324   
IGTI  2008  Heat Transfer and Flow Characteristics of a Leading Edge Impingement Cooling System for Low Pressure Turbine Vanes  Jose Javier Alvarez, Pedro de la Calzada, Gregory Krulic  GT2008-50142   
IGTI  2008  Harsh Environment Pressure Transducers Employing Metal Diaphragms and Silicon on Insulator Sensing Networks for Gas Turbine Application  Anthony D. Kurtz, Boaz Kochman, Alex A. Ned  GT2008-51302   
IGTI  2008  Harmonic Analysis of Jet Mixing  Sangsig Yun, Joan Boulanger, Leiyong Jiang  GT2008-51402   
IGTI  2008  GT Inlet Air Boosting and Cooling Coupled With Cold Thermal Storage in Combined Cycle Power Plants  Nicola Palestra, Giovanna Barigozzi, Antonio Perdichizzi  GT2008-51061   
IGTI  2008  Ground-Based Vibration Response of a Spinning, Cyclic Symmetric Rotor With Gyroscopic and Centrifugal Softening Effects  I. Y. Shen, Hyunchul Kim  GT2008-50727   
IGTI  2008  Generation of a Quasi 3-D Map of a Half-Embedded Ultra High Bypass Ratio Turbofan Intake on the Wing of a Broad Delta Wing Airframe  S. Rousselot, D. Truffi, G. Doulgeris, S. Mistry, V. Pachidis, P. Pilidis  GT2008-51008   
IGTI  2008  Gas-Side Heat Transfer in Syngas, Hydrogen-Fired and Oxy-Fuel Turbines  Danny W. Mazzotta, Ventzislav G. Karaivanov, William S. Slaughter, Minking K. Chyu; Mary Anne Alvin  GT2008-51474   
IGTI  2008  Gas Turbine Temperature Prediction Using Unsteady CFD and Realistic Non-Uniform 2D Combustor Exit Properties  Frederic N. Felten, Semir Kapetanovic, D. Graham Holmes, Michael Ostrowski  GT2008-50275   
IGTI  2008  Gas Turbine Power Augmentation: Parametric Study Relating to Fog Droplet Size and its Influence on Evaporative Efficiency  Mustapha Chaker, Cyrus B. Meher-Homji  GT2008-51476   
IGTI  2008  Gas Turbine Plant Thermal Performance Degradation Assessment  Alexander V. Mirzamoghadam  GT2008-50032   
IGTI  2008  Gas Turbine Integrated High-Efficiency Oxy-Fuel Combustion Process With CO2 Capture  Kourosh E. Zanganeh, Ahmed Shafeen, Murlidhar Gupta, Emmanuel O. B. Ogendengbe, Milenka Mitrovic  GT2008-51456   
IGTI  2008  Gas Turbine Flexibility With Carbon Constrained Fuels  Klaus Payrhuber, Robert M. Jones, Marcus H. Scholz  GT2008-50556   
IGTI  2008  Gas Turbine Fault Diagnostics Using a Fusion of Least Squares Estimations and Fuzzy Logic Rules  Holger Lipowsky, Stephan Staudacher, Daniel Nagy; Michael Bauer  GT2008-50190   
IGTI  2008  Gas Turbine Engine Noise  R. Mankbadi  GT2008-50041   
IGTI  2008  Gas Turbine Electric Start System (GT-ESS) Ship Integration  Martin Quinones, Saurabh Deshmukh  GT2008-50708   
IGTI  2008  Gas Turbine Accessory Health Management Evaluation Using a Hybrid Prognostic Approach  Carl S. Byington, Sudarshan P. Bharadwaj, Matthew J. Watson  GT2008-50309   
IGTI  2008  Future Aero-Engines' Optimization for Minimal Operating Costs  Fernando Colmenares Quintero, Stephen Ogaji, Pericles Pilidis, Daniele Pascovici; Alexander Garcia; Luis Latoree  GT2008-50127   
IGTI  2008  Future Aero-Engines' Optimization for Minimal Fuel Burn  Fernando Colmenares Quintero, Josue Gomez, Stephen Ogaji, Pericles Pilidis, Konstantinos G. Kyprianidis; Sergio Latorre  GT2008-50126   
IGTI  2008  Further Effects of Water Ingestion on Axial Flow Compressors and Aeroengines at Part Speed  John Williams  GT2008-50620   
IGTI  2008  Full-Parametric Design System to Improve the Stage Efficiency of a High-Fidelity HP Turbine Configuration  Andrea Milli, Shahrokh Shahpar  GT2008-51348   
IGTI  2008  Full 3D Conjugate Heat Transfer Simulation and Heat Transfer Coefficient Prediction for the Effusion-Cooled Wall of a Gas Turbine Combustor  Andreas Jeromin, Christian Eichler, Berthold Noll, Manfred Aigner  GT2008-50422   
IGTI  2008  Fuel Interchangeability for Lean Premixed Combustion in Gas Turbine Engines  Don Ferguson, Geo. A. Richard, Doug Straub  GT2008-51261   
IGTI  2008  Fuel Flexibility of the Alstom GT13E2 Medium Sized Gas Turbine  Klaus Dobbeling, Martin Zajadatz, Thiemo Meeuwissen, Peter Flohr  GT2008-50950   
IGTI  2008  From Test Rig to Field Operation: A Lesson Learned  Federico Bonzani, Carlo Piana  GT2008-50833   
IGTI  2008  From Research to Didactics: The Course of Dynamics and Control of Fluid Machines for Automation Engineering Students  M. Venturini, M. Morini  GT2008-50042   
IGTI  2008  Friction Damping Modeling in High Stress Contact Areas Using Microslip Friction Model  Armando Coro, Francisco J. Marquina, Roberto Alonso, Alberto Gutierrez; David J. Ewins, Giovanna Girini  GT2008-50359   
IGTI  2008  Free-Stream Effects on the Cooling Performance of Cylindrical and Fan-Shaped Cooling Holes  Christian Saumweber; Achmed Schulz  GT2008-51030   
IGTI  2008  Foreign Object Damage in an Oxide/Oxide Composite at Ambient Temperature  Sung R. Choi, Donald J. Alexander, Robert W. Kowalik  GT2008-50505   
IGTI  2008  Foreign Object Damage and Fatigue Strength Loss in Compressor Blades  Mickhael S. Nikhamkin, Leonid V. Voronov, Irina V. Semenova  GT2008-51493   
IGTI  2008  Forced Response of Shrouded Blades With Intermittent Dry Friction Force  Weiwei Gu, Zili Xu, Lv Qiang  GT2008-51041   
IGTI  2008  Forced Response of a Large Civil Fan Assembly  J. S. Green  GT2008-50319   
IGTI  2008  Forced Response Assessment Using Modal Force Based Indicator Functions  M. Vahdati, C. Breard; G. Simpson; M. Imregun  GT2008-50306   
IGTI  2008  Forced Response and Surge Behaviour of IP Core-Compressors With Ice-Damaged Rotor Blades  Sridar Dhandapani, Mehdi Vahdati, Mehmet Imregun  GT2008-50335   
IGTI  2008  Forced Flame Behaviour in a Spray Combustor  David M. Arthur, Ann P. Dowling, R. Stewart Cant; Min Zhu  GT2008-50235   
IGTI  2008  Flow Field and Combustion Characterization of Premixed Gas Turbine Flames by Planar Laser Techniques  Ulrich Stopper, Wolfgang Meier, Rajesh Sadanandan, Michael Stohr, Manfred Aigner; Ik Soo Kim  GT2008-50520   
IGTI  2008  Flame Transfer Matrices of a Premixed Flame and a Global Check With Modelling and Experiments  Panduranga Reddy Alemela, Dan Fanaca, Florian Ettner, Christoph Hirsch, Thomas Sattelmayer; Bruno Schuermans  GT2008-50111   
IGTI  2008  Flame Speed and Velocity Measurements in Premixed Hydrogen-Enriched Flames  Shengrong Zhu, Sumanta Acharya  GT2008-51322   
IGTI  2008  Fixed-Bed Coal Gasifiers Integrated With MCFC-GT Hybrid Systems for Distributed Power and Heat Generation  Daniele Cocco, Fabio Serra, Vittorio Tola  GT2008-50777   
IGTI  2008  Fischer-Tropsch Fuel Characterization via Microturbine Testing and Fundamental Combustion Measurements  A. Srinivasan, B. Ellis, J. F. Crittenden, W. E. Lear; Brandon Rotavera, Eric L. Petersen  GT2008-51447   
IGTI  2008  Filter-Based Time-Domain Impedance Boundary Conditions for CFD Applications  Andreas Huber, Philipp Romann, Wolfgang Polifke  GT2008-51195   
IGTI  2008  Film-Cooling Flowfields With Trenched Holes on an Endwall  N. Sundaram, K. A. Thole  GT2008-50149   
IGTI  2008  Film-Cooling Effectiveness From Shaped Film Cooling Holes for a Gas Turbine Blade  Shantanu Mhetras; Je-Chin Han; Ron Rudolph  GT2008-50916   
IGTI  2008  Film Cooling in a Separated Flow Field on a Novel Lightweight Turbine Blade  Yoji Okita, Chiyuki Nakamata; Masaya Kumada; Masahiro Ikeda  GT2008-50228   
IGTI  2008  Film Cooling From a Row of Holes With Both Ends Embedded in Transverse Slots  Q. W. Wang, D. H. Zhang, L. Sun, Q. Y. Chen, M. Lin, M. Zeng  GT2008-51501   
IGTI  2008  Field Identification of Stiffness and Damping Characteristics of Fluid Film Bearings  Aly El-Shafei, Sameh H. Tawfick, M. O. A. Mokhtar  GT2008-50909   
IGTI  2008  Feasibility Study of Low Grade Heat Recovery Rankine Cycle Using Ozone-Neutral Refrigerant  Asfaw Beyene, W. Wayne Husband  GT2008-51537   
IGTI  2008  Fast Epitaxial High Temperature Brazing of Single Crystalline Nickel Based Superalloys  Britta Laux, Sebastian Piegert, Joachim Rosler  GT2008-50055   
IGTI  2008  Extensive Studies on Internal and External Heat Transfer Characteristics of Integrated Impingement Cooling Structures for HP Turbines  Ken-Ichi Funazaki, Hamidon Bin Salleh  GT2008-50202   
IGTI  2008  Extending the Fuel Flexibility From Natural Gas to Low-LHV Fuel: Test Campaign on a Low-NOx Diffusion Flame Combustor  Nicola Giannini, Gianni Ceccherini, Christian Romano, Alessandro Zucca  GT2008-50647   
IGTI  2008  Extended Models for Transitional Rough Wall Boundary Layers With Heat Transfer: Part II -- Model Validation and Benchmarking  M. Stripf, A. Schulz, H.-J. Bauer, S. Wittig  GT2008-50495   
IGTI  2008  Extended Models for Transitional Rough Wall Boundary Layers With Heat Transfer: Part I -- Model Formulations  M. Stripf, A. Schulz, H.-J. Bauer, S. Wittig  GT2008-50494   
IGTI  2008  Experiments and Computations on Large Tip Clearance Effects in a Linear Cascade  Richard Williams, David Gregory-Smith, Li He, Grant Ingram  GT2008-50557   
IGTI  2008  Experimental Study on Nonlinear Dynamics Characteristics of High-Speed Rotor-Gas Lubrication Bearing System  Cex Ce, Jinfu Yang, Chaoqun Nie  GT2008-50250   
IGTI  2008  Experimental Study on Laser-Induced Ignition of Swirl-Stabilized Kerosene Flames  Klaus G. Moesl, Klaus G. Vollmer, Thomas Sattelmayer; Johannes Eckstein, Herbert Kopecek  GT2008-50487   
IGTI  2008  Experimental Study on Impeller Blade Vibration During Resonance: Part 2 -- Blade Damping  Albert Kammerer, Reza S. Abhari  GT2008-50467   
IGTI  2008  Experimental Study on Impeller Blade Vibration During Resonance: Part 1 -- Blade Vibration Due to Inlet Flow Distortion  Albert Kammerer, Reza S. Abhari  GT2008-50466   
IGTI  2008  Experimental Study of Oblong Exhaust Ejectors With Multi-Ring Oblong Entraining Diffusers  Qi Chen, A. M. Birk  GT2008-50696   
IGTI  2008  Experimental Study of Internal Heat Transfer Coefficients in a Rectangular, Ribbed Channel Using a Non-Invasive, Non-Destructive, Transient Inverse Method  Peter Heidrich, Jens von Wolfersdorf; Martin Schnieder  GT2008-50297   
IGTI  2008  Experimental Study of Combustion on a Micro Gas Turbine Combustor  Feng-Shan Wang, Wen-Jun Kong, Ba-Rui Wang  GT2008-50975   
IGTI  2008  Experimental Study of Advanced Convective Cooling Techniques for Combustor Liners  Michael Maurer, Uwe Ruedel, Michael Gritsch; Jens von Wolfersdorf  GT2008-51026   
IGTI  2008  Experimental Research on Pyrolysis Process About Corn Stalk and Rice Husks  Guihuan Yan; Li Sun, Min Xu, Rongfeng Sun; Fengzhong Sun; Xiangmei Meng  GT2008-51188   
IGTI  2008  Experimental Investigations With Numerical Validation of an Outlet Guide Vane With an Engine Mount Recess  Johan Hjarne; Valery Chernoray; Jonas Larsson  GT2008-50168   
IGTI  2008  Experimental Investigations of Film Flows Around Obstacles  Johannes Kneer; Carol Eastwick, Adam Robinson; Armin Muller; Graham Johnson; Hans-Jorg Bauer  GT2008-50630   
IGTI  2008  Experimental Investigation of the Time-Averaged Flow in an Intermediate Turbine Duct  Lars-Uno Axelsson, T. Gunnar Johansson  GT2008-50829   
IGTI  2008  Experimental Investigation of Flow and Heat Transfer for Single and Multiple Rows of Circular Jets Impinging on a Concave Surface  B. V. N. Rama Kumar; B. V. S. S. S. Prasad  GT2008-51044   
IGTI  2008  Experimental Investigation of a Single Stage Helium Axial Compressor of HTGR-10 Power Conversion Unit  Rongkai Zhu, Qun Zheng; Jiguo Zou; Rakesh Bhargava  GT2008-50921   
IGTI  2008  Experimental Investigation of a Centrifugal Compressor Stage With Focus on the Flow in the Pipe Diffuser Supported by Particle Image Velocimetry (PIV) Measurements  Uwe Zachau, Carsten Buescher, Reinhard Niehuis, Herward Hoenen; David C. Wisler, Zaher M. Moussa  GT2008-51538   
IGTI  2008  Experimental Investigation Into the Influence of Varying Stagger on the Performance of a Pin-Fin Array  W. D. Allan, S. A. Andrews, M. LaViolette  GT2008-50381   
IGTI  2008  Experimental Investigation Into the Behaviour Within Flush Offtake Pipes  Helge Dagefoerde, Carol Eastwick, Adam Robinson, Graham Johnson; Sinisa Kontin, Hans-Jorg Bauer  GT2008-50632   
IGTI  2008  Experimental Heat Transfer and Discharge Coefficients for Single Confined Jet Impingement Normal to a Surface at Close Distances  J. D. Shapiro; M. E. Taslim  GT2008-50080   
IGTI  2008  Experimental Evaluation of Abradable Seal Performance at High Temperature  A. Dadouche, M. J. Conlon; W. Dmochowski; B. Liko, J.-P. Bedard  GT2008-51228   
IGTI  2008  Experimental Demonstration of the Tip Clearance Flow Resonance Behind Compressor Non-Synchronous Vibration  Jean Thomassin; Huu Duc Vo, Njuki W. Mureithi  GT2008-50303   
IGTI  2008  Experimental Characterization of a Hydrogen Fuelled Combustor With Reduced NOx Emissions for a 10 MW Class Gas Turbine  Stefano Cocchi, Michele Provenzale; Valerio Cinti, Luciano Carrai, Stefano Sigali; Davide Cappetti  GT2008-51271   
IGTI  2008  Experimental Characterisation of the Stiffness and Leakage of a Prototype Leaf Seal for Turbine Applications  Ingo H. J. Jahn, Gervas Franceschini; Andrew K. Owen, David Gillespie  GT2008-51206   
IGTI  2008  Experimental and Theoretical Investigation of Centrifugal Compressor Performance Characteristics  Sayyed Mostafa Motavalli, Ali Hajilouy-Benisi, Mahdi Nili-Ahmadabadi  GT2008-50939   
IGTI  2008  Experimental and Simulation Study of Biodiesel Combustion in a Microturbine  Ee Sann Tan, Kumaran Palanisamy  GT2008-51497   
IGTI  2008  Experimental and Numerical Investigations on Turbine Airfoil Cooling Designs: Part II -- An Investigation on Heat Transfer Features by Infrared Thermal Imaging Technique  Jianhua Wang, H. Z. Xu, L. Ma; X. Y. Wu, S. J. Yang  GT2008-50674   
IGTI  2008  Experimental and Numerical Investigations on Turbine Airfoil Cooling Designs: Part I -- An Investigation on Flow Features by Particle Image Velocimetry  J. H. Wang, H. Z. Xu, Y. L. Liu; Z. N. Du, S. J. Yang  GT2008-50673   
IGTI  2008  Experimental and Numerical Investigation on Aeroacoustic Sound of Stator-Rotor System With Trailing Edge Blowing  Yadong Wu, Xiaocheng Zhu, Zhaohui Du  GT2008-50093   
IGTI  2008  Experimental and Numerical Investigation of Interactions Between Axial Turbine and Non-Axisymmetric Exhaust Hood  Jing-Lun Fu, Si-Jing Zhou, Jian-Jun Liu  GT2008-50766   
IGTI  2008  Experimental and Numerical Investigation of Friction Rings Damping of Blisks  Denis Laxalde, Claude Gibert, Fabrice Thouverez  GT2008-50862   
IGTI  2008  Experimental and Numerical Investigation of Fluid Dynamics of the Bounded and Unbounded Triangular Jets  Reza Riahi, Farshid Bagheri, Bijan Farhanieh  GT2008-50407   
IGTI  2008  Experimental and Numerical Investigation of a Centrifugal Compressor and Numerical Study of the Area Ratio and Tip Clearance Effects on the Performance Characteristic  Mahdi Nili-Ahmadabadi, Ali Hajilouy-Benisi, Mohammad Durali, Sayyed Mostafa Motavalli  GT2008-50969   
IGTI  2008  Experimental and Numerical Flutter Investigation of the 1st Stage Rotor in 4-Stage High Speed Compressor  E. Johann, B. Muck; J. Nipkau  GT2008-50698   
IGTI  2008  Experimental and CFD Based Determination of Flutter Limits in Supersonic Space Turbines  Pieter J. Groth, Hans E. Martensson, Niklas Edin  GT2008-50675   
IGTI  2008  Experimental Analysis of Varied Vortex Reducer Configurations for the Internal Air System of Jet Engine Gas Turbines  Andre Gunther, Wieland Uffrecht; Lothar Heller; Erwin Kaiser, Stephan Odenbach  GT2008-50738   
IGTI  2008  Experimental Aeroacoustic Studies on Improved Tip Geometries for Passive Noise Signature Control in Low-Speed Axial Fans  Stefano Bianchi, Alessandro Corsini, Franco Rispoli; Anthony G. Sheard  GT2008-51057   
IGTI  2008  Exhaust Gas Recirculation in DLN F-Class Gas Turbines for Post-Combustion CO2 Capture  Ahmed M. ElKady, Andrei Evulet, Anthony Brand; Tord Peter Ursin, Arne Lynghjem  GT2008-51152   
IGTI  2008  eXclean(R): A New Surface Preparation of Turbine Components for Deposition of MCrAlY Coatings With Super Clean Interface  Dario Russo, Carlo Giolli, Andrea Scrivani, Gabriele Rizzi, Alessandro Lanzi  GT2008-50685   
IGTI  2008  Evolution of the Laminar Boundary Layer Over a Flat Plate Under a Free Stream Turbulence Intensity of 1.3%  E. J. Walsh, F. Brighenti; D. M. McEligot  GT2008-50409   
IGTI  2008  EVITA Study: Evaluation of Unscheduled Aircraft and Industrial Gas Turbine Part Failure Cases  Gerrit Kool; Jacques van den Elshout; Eric Vogelaar; Ron van Gestel; Andre Mom  GT2008-50978   
IGTI  2008  Evaluation of Weighted Sum of Grey Gases Coefficients for Combustion Gases Using Predicted Emissivities From High Resolution Spectroscopic Databases  Mehdi Bahador; Bengt Sunden  GT2008-51028   
IGTI  2008  Evaluation of Q-Values of a Rotor-Bearing System Using a Modal Open Loop Transfer Function  Hiroyuki Fujiwara, Hiroto Oyama, Norihisa Anegawa, Osami Matsushita  GT2008-50459   
IGTI  2008  Evaluation of Impact Loads of Clutch Engaging Within Single Shaft Applications for Power Generation  Bernd Luneburg, Meinolf Klocke; Frank Joswig, Stefan Kulig  GT2008-51063   
IGTI  2008  Evaluation of a Micro Gas Turbine Fed by Blends of Biomass Producer Gas and Natural Gas  Matteo Prussi, Giovanni Riccio, David Chiaramonti, Francesco Martelli  GT2008-50236   
IGTI  2008  EVA: A Tool for Environmental Assessment of Novel Propulsion Cycles  Konstantinos G. Kyprianidis, Ramon F. Colmenares Quintero, Stephen O. T. Ogaji, Pericles Pilidis; Anestis I. Kalfas; Daniele S. Pascovici  GT2008-50602   
IGTI  2008  Estimating Critical Flaw Sizes in Welds of the New ARES I-X Space Vehicle for its Successful Solo Flight Using Probabilistic Approaches  Shantaram S. Pai; V. K. Nagpal, Peter A. Hoge, B. M. Patel  GT2008-50626   
IGTI  2008  Establishing a Methodology for Resolving Convective Heat Transfer From Complex Geometries  J. Ostanek, K. Thole; J. Prausa, A. Van Suetendael  GT2008-51411   
IGTI  2008  Error Evaluation in Metal Surface Temperature Prediction Due to Non-Simulation of the Effect of Water Impingement and Runback Water on an Anti-Iced Turboprop Engine Inlet Guide Vane Structure  Javier Castillo, Gema Ortega  GT2008-50578   
IGTI  2008  Environmental Degradation of Heat-Resistant Alloys During Exposure to Simulated and Actual Gas Turbine Recuperator Environments  James M. Rakowski, Charles P. Stinner; J. Preston Montague, Mark Lipschutz  GT2008-51336   
IGTI  2008  Enlarging the Fuel Flexibility Boundaries: Theoretical and Experimental Application to a New Heavy-Duty Gas Turbine (MS5002E)  Antonio Asti, Annalisa Forte, Michele D'Ercole; Ertan Yilmaz; Jesse F. Stewart  GT2008-50773   
IGTI  2008  Enhanced Fault Localization Using Probabilistic Fusion With Gas Path Analysis Algorithms  A. Kyriazis, K. Mathioudakis  GT2008-51079   
IGTI  2008  Enhanced Cooling Effectiveness in Full-Coverage Film Cooling System With Impingement Jets  Sang Hyun Oh, Dong Hyun Lee, Kyung Min Kim, Hyung-Hee Cho; Moon Young Kim  GT2008-50784   
IGTI  2008  Enhanced Blade Row Matching Capabilities via 3D Multistage Inverse Design and Pressure Loading Manager  M. P. C. van Rooij, T. Q. Dang; L. M. Larosiliere  GT2008-50539   
IGTI  2008  Energetic and Economic Analyses of Integrated Biogas-Fed Energy Systems  R. Bettocchi, M. Pinelli, P. R. Spina, M. Venturini, M. Cadorin, G. Cenci, M. Morini  GT2008-50044   
IGTI  2008  Endwall Performance of Outlet Guide Vane Cascades With Different Blade Loading Distributions  Toyotaka Sonoda; Heinz-Adolf Schreiber; Toshiyuki Arima  GT2008-51111   
IGTI  2008  Endwall Film Cooling Effects on Secondary Flows in a Contoured Endwall Nozzle Vane  Giovanna Barigozzi, Giuseppe Franchini, Antonio Perdichizzi, Marco Quattrore  GT2008-51065   
IGTI  2008  Emulation of Hybrid System Start-Up and Shutdown Phases With a Micro Gas Turbine Based Test Rig  Mario L. Ferrari; Matteo Pascenti, Loredana Magistri; Aristide F. Massardo  GT2008-50617   
IGTI  2008  Employing Inverted Brayton Cycle to Solve Stack Temperature Problems After Water Recovery From HAT Cycle Exhaust Gas  Kuifang Wan, Yunhan Xiao, Shijie Zhang  GT2008-51017   
IGTI  2008  Emission Characteristics of a Premixed Cyclic-Periodical-Mixing Combustor Operated With Hydrogen-Natural Gas Fuel Mixtures  Jochen R. Bruckner-Kalb, Michael Krosser, Christoph Hirsch, Thomas Sattelmayer  GT2008-51076   
IGTI  2008  Efforts to Improved Aerodynamics of the Large Cooling Tower Fan by Modification of the Fan Stack  Steve Ingistov  GT2008-50223   
IGTI  2008  Efficient FEA/CFD Thermal Coupling for Engineering Applications  Zixiang Sun, John W. Chew, Nicholas J. Hills, Konstantin N. Volkov; Christopher J. Barnes  GT2008-50638   
IGTI  2008  Efficient Design Method for Non-Synchronous Vibrations Using Enforced Motion  Meredith A. Spiker, Robert E. Kielb, Kenneth C. Hall, Jeffrey P. Thomas  GT2008-50599   
IGTI  2008  Efficient Computational Model for Non-Axisymmetric Flow and Heat Transfer in Rotating Cavity  L. He  GT2008-51132   
IGTI  2008  Efficiency Analyses of a Coal Gasification Molten Carbonate Fuel Cell With a Gas Turbine Combined Cycle Including CO2 Recovery  F. Yoshiba, E. Koda  GT2008-50360   
IGTI  2008  Effects of Turbine Tip Clearance on Gas Turbine Performance  Cleverson Bringhenti, Joao Roberto Barbosa  GT2008-50196   
IGTI  2008  Effects of the Inlet Boundary Layer Thickness on Rotating Stall in an Axial Compressor  Minsuk Choi; Seong Hwan Oh, Han Young Ko; Je Hyun Baek  GT2008-50886   
IGTI  2008  Effects of Suction and Injection Purge-Flow on the Secondary Flow Structures of a High-Work Turbine  P. Schuepbach; M. B. Rose; R. S. Abhari; T. Germain, I. Raab, J. Gier  GT2008-50471   
IGTI  2008  Effects of Sand Ingestion Through an Axial Fan With Blade Staggering  Adel Ghenaiet  GT2008-50338   
IGTI  2008  Effects of Rotating Blade Wakes on Separation and Pressure Recovery in Turbine Exhaust Diffusers  Olaf Sieker, Joerg R. Seume  GT2008-50788   
IGTI  2008  Effects of Inlet Conditions on the Turbine Performance of a Radial Turbine  Fredrik Hellstrom, Laszlo Fuchs  GT2008-51088   
IGTI  2008  Effects of Fuel-Nozzle Configurations on Particulate-Matter Emissions From a Model Gas Turbine Combustor  Tomohiro Asai, Hiromi Koizumi, Shohei Yoshida, Hiroshi Inoue  GT2008-50351   
IGTI  2008  Effects of Combustor Geometry on the Flowfields and Flame Properties of a Low-Swirl Injector  R. K. Cheng, D. Littlejohn  GT2008-50504   
IGTI  2008  Effects of Bowed Stators on a Transonic Fan With Distorted Inlet  Peng Sun; Ji'ang Han; Jingjun Zhong; Liquan Tao; Muxiao Yang, Yang Yu  GT2008-50523   
IGTI  2008  Effects of Blade Stack on Pipeline Compressor Impeller Performance  Michael J. Cave  GT2008-50071   
IGTI  2008  Effective Thermoelastic Properties of Flat and Curved Transpiration Cooled Multilayer Plates via Homogenization  Gottfried Laschet, Stephan Rex  GT2008-50590   
IGTI  2008  Effect of Water Vapor on the Kinetics of Combustion of Hydrogen and Natural Gas: Experimental and Detailed Modeling Study  Tanh Le Cong, Philippe Dagaut  GT2008-50272   
IGTI  2008  Effect of Wakes and Secondary Flow on Re-Attachment of Turbine Exit Annular Diffuser Flow  David Kluss; Alexander Wiedermann; Horst Stoff  GT2008-50211   
IGTI  2008  Effect of Wake on Endwall Film Cooling Effectiveness for a Row of Cylindrical Holes Near the Stagnation Region of an Airfoil  S. Rodriguez, V. Krishnan, Stephanie Kersten, J. S. Kapat  GT2008-51460   
IGTI  2008  Effect of Variations in Shroud Geometry on Single Phase Flow Over a Shrouded Single Spiral Gear  Steve Rapley, Carol Eastwick, Kathy Simmons  GT2008-50633   
IGTI  2008  Effect of Unsteadiness on the Performance of a Transonic Centrifugal Compressor Stage  Isabelle Trebinjac, Pascale Kulisa, Nicolas Bulot; Nicolas Rochuon  GT2008-50260   
IGTI  2008  Effect of Time and Temperature on TBC Failure Mode Under Oxidizing Environment  N. S. Cheruvu, K. S. Chan; D. W. Gandy  GT2008-51528   
IGTI  2008  Effect of Temporal Accuracy on the Numerical Prediction of an Isolated Transonic Rotor at Near Stall Conditions  Daniel Lee, Paul D. Orkwis; Fu-Lin Tsung, William Magnuszewski, Christopher Noll  GT2008-51486   
IGTI  2008  Effect of Stator Clocking on the 3D Aeroelastic Characteristics of Compressor Rotor Blades  Romuald Rzadkowski; Vitally Gnesin, Luba Kolodyazhnaya  GT2008-50767   
IGTI  2008  Effect of Side Feed Pressurization on the Dynamic Performance of Gas Foil Bearings: A Model Anchored to Test Data  Tae Ho Kim, Luis San Andres  GT2008-50571   
IGTI  2008  Effect of Roughness and Unsteadiness on the Performance of a New LPT Blade at Low Reynolds Numbers  Francesco Montomoli; Howard P. Hodson; Frank Haselbach  GT2008-50488   
IGTI  2008  Effect of Rib Spacing on Heat Transfer in a Two-Pass Rectangular Channel (AR=1:4) With a Sharp Entrance at High Rotation Numbers  Michael Huh, Yao-Hsien Liu, Je Chin Han; Sanjay Chopra  GT2008-50311   
IGTI  2008  Effect of Radial Location of Nozzles on Performance of Pre-Swirl Systems  Paul Lewis, Mike Wilson, Gary Lock, J. Michael Owen  GT2008-50295   
IGTI  2008  Effect of Loading Level and Distribution on LPT Losses  C. Prakash, D. G. Cherry, H. W. Shin, J. Machnaim, L. Dailey, R. Beacock, D. Halstead, A. R. Wadia; S. Guillot, W. F. Ng  GT2008-50052   
IGTI  2008  Effect of Hydrogen Combustion on the Combustion Dynamics of a Natural Gas Combustor  Kapil Singh, Bala Varatharajan, Ertan Yilmaz, Fei Han; Kwanwoo Kim  GT2008-51343   
IGTI  2008  Effect of Geometry Variations on the Cooling Performance of Fan-Shaped Cooling Holes  Christian Saumweber; Achmed Schulz  GT2008-51038   
IGTI  2008  Effect of Fuel Dilution on the Stability Characteristics of Syngas Diffusion Flames  Kejin Mo; Xin Hui; Yongsheng Zhang, Zhedian Zhang, Yue Wang, Yunhan Xiao  GT2008-50327   
IGTI  2008  Effect of Flame Structure on the Flame Transfer Function in a Premixed Gas Turbine Combustor  Daesik Kim, Jong Guen Lee, Bryan D. Quay, Domenic Santavicca; Kwanwoo Kim, Shiva Srinivasan  GT2008-51014   
IGTI  2008  Effect of Different Economic Support Policies on the Optimal Definition and Operation of a CHP and RES Distributed Generation Systems  Mauro Reini; Melchiorre Casisi; Lorenzo Castelli; Piero Pinamonti  GT2008-50353   
IGTI  2008  Effect of Coolant Entry Orientation on Flow and Heat Transfer in the Trailing Region Channels of a Gas Turbine Vane  N. Kulasekharan, B. V. S. S. S. Prasad  GT2008-50951   
IGTI  2008  Effect of Coolant Ejection in Rectangular and Trapezoidal Trailing Edge Cooling Passages  Lesley M. Wright, Amir S. Gohardani  GT2008-50414   
IGTI  2008  Effect of Computational Grid on Performance of Two-Equation Models of Turbulence for Film Cooling Applications  Savas Yavuzkurt, Melaku Habte  GT2008-50153   
IGTI  2008  Economical Benefits of Highly Efficient Three-Stage Intake Air Filtration for Gas Turbines  Thomas Schroth, Michele Cagna  GT2008-50280   
IGTI  2008  Economic Benefits of Hybrid Drive Propulsion for DDG-51 Class Ships  Fred T. Willett, Greg Reed, Gene Castles  GT2008-50053   
IGTI  2008  Dynamics and Stability Limits of Syngas Combustion in a Swirl-Stabilized Combustor  Raymond L. Speth, Duane E. Hudgins, H. Murat Altay, Ahmed F. Ghoniem  GT2008-51023   
IGTI  2008  Dynamic Response of the Vertical Rotor System to Base Excitation  Jianli Zuo, Jianjun Wu, Ping Li, Shenjian Su  GT2008-50402   
IGTI  2008  Dynamic Fusion and Parameter Optimization of Multiple Classifier Systems  Anuradha Kodali, William Donat, Satnam Singh, Kihoon Choi, Krishna Pattipati  GT2008-51274   
IGTI  2008  Dynamic Characteristics of Composite Helicopter Blade Solved by Using the Differential Quadrature Method  J. H. Kuang; M. H. Hsu; T. P. Hung  GT2008-50193   
IGTI  2008  Dynamic and Flashback Characteristics of the Syngas Premixed Swirling Combustors  Quanbin Song, Aibing Fang, Gang Xu, Yanji Xu, Weiguang Huang  GT2008-50752   
IGTI  2008  Dynamic Analysis of Fretting-Wear in Friction Contact Interfaces  Loic Salles, Laurent Blanc, Fabrice Thouverez; Alexander M. Gouskov  GT2008-51112   
IGTI  2008  Dynamic Analysis of Compressor Trips in the Snohvit LNG Refrigerant Circuits  Ingrid Schjolberg; Gunleiv Skofteland; Morten Hyllseth; Havard Nordhus  GT2008-51235   
IGTI  2008  Double-Jet Film-Cooling for Highly Efficient Film-Cooling With Low Blowing Ratios  Karsten Kusterer; Dieter Bohn; Takao Sugimoto; Ryozo Tanaka; Anas Elyas  GT2008-50073   
IGTI  2008  Distortion Compensation by Shape Modification of Complex Turbine Geometries in the Presence of High Temperature Gradients  John McElhaney  GT2008-50757   
IGTI  2008  Diagnosing Coupled Lateral-Torsional Vibrations in Turbomachinery  Vinayaka N. Rajagopalan; John M. Vance  GT2008-50125   
IGTI  2008  Development, Characterization and Testing of MCrAlY HVOF Coating Used as Bond Coat for YPSZ Top Coat  Carlo Giolli, Alessandro Lanzi, Gabriele Rizzi, Andrea Scrivani, Dario Russo, Marco Spagnoli  GT2008-50688   
IGTI  2008  Development of Numerical Tools for Stator-Rotor Cavities Calculation in Heavy-Duty Gas Turbines  L. Innocenti, C. Bianchini, R. Da Soghe, B. Facchini, M. Micio; L. Bozzi, S. Traverso  GT2008-51268   
IGTI  2008  Development of Lean-Burn Low-NOx Combustion Technology at Rolls-Royce Deutschland  W. Lazik, Th. Doerr, R. von der Bank, S. Bake, L. Rackwitz  GT2008-51115   
IGTI  2008  Development of Gas Turbine Hot Gas Path Parts Maintenance Planning Support System  Tomoharu Fujii, Terutaka Fujioka  GT2008-50249   
IGTI  2008  Development of an Improved Desiccant-Based Evaporative Cooling System for Gas Turbines  Amir Abbas Zadpoor, Ali Asadi Nikooyan  GT2008-50258   
IGTI  2008  Development of a Tip Leakage Control Device for an Axial Flow Fan  Cengiz Camci, Ali Akturk  GT2008-50785   
IGTI  2008  Development of a Guideline for the Design of Surge Control Systems  Marybeth G. Nored, Klaus Brun; Rainer Kurz  GT2008-50380   
IGTI  2008  Development of a Companion Set of Charts -- Soft Sensor and Directional Moving Range -- for Fault Monitoring, Detection and Diagnosis With Application to Gas Turbine Engines  Dorin Scheianu; Philip A. Farrington  GT2008-50962   
IGTI  2008  Development and Verification of a Non-Linear Algebraic Model for the Turbulent Heat Fluxes in Rotating Passages  B. A. Younis; B. Weigand, F. Mohr, M. Schmidt  GT2008-50386   
IGTI  2008  Development and Validation of a 1-D Tool for Thermoacoustic Instabilities Analysis in Gas Turbine Combustors  L. Mangani, B. Facchini; F. Simonetti; A. Andreini  GT2008-51248   
IGTI  2008  Development and Testing of the Upgraded High Pressure Turbine Section for an Industrial Gas Turbine  U. Orth, E. Aschenbruck, D. Frank, T. Korte, R. Muller  GT2008-50304   
IGTI  2008  Development and Testing of High Temperature Silicon Nitride Microturbine Rotors  Vimal Pujari, Ara Vartabedian, Gregg Wayman  GT2008-50108   
IGTI  2008  Development and Testing of a 10 kW Diffusive Micromix Combustor for Hydrogen-Fuelled [micro]-Scale Gas Turbines  A. E. Robinson, H. H.-W. Funke, Uwe Ronna  GT2008-50418   
IGTI  2008  Development and F-Class Industrial Gas Turbine Engine Testing of Smart Components With Direct-Write Embedded Sensors and High Temperature Wireless Telemetry  David Mitchell, Anand Kulkarni, Edward Roesch, Ramesh Subramanian, Andrew Burns; Jeffrey Brogan, Robert Greenlaw; Alex Lostetter, Marcelo Schupbach, John Fraley; Rod Waits  GT2008-51533   
IGTI  2008  Determination of Cooling Parameters for a High Speed, True Scale, Metallic Turbine Vane Ring  M. D. Polanka, R. J. Anthony; Dave G. Bogard; Mark F. Reeder  GT2008-50281   
IGTI  2008  Determination and Comparison of the Dynamic Characteristics of a Perfectly Premixed Flame in Both Single and Annular Combustion Chambers  Dan Fanaca, Panduranga Reddy Alemela, Florian Ettner, Christoph Hirsch, Thomas Sattelmayer; Bruno Schuermans  GT2008-50781   
IGTI  2008  Detailed Internal Measurements of a Siemens Combustor Operating at Gas Turbine Relevant Conditions  J. P. Wood, M. Wedlock, M. N. Miller, G. J. Sims; K. Liu; K. Syed; A. P. Crayford, P. Bowen, Y. Sevcenco  GT2008-50790   
IGTI  2008  Detailed Flow Investigation Using PIV in a Rotating Square-Sectioned Two-Pass Cooling System With Ribbed Walls  M. Elfert, M. Voges, J. Klinner  GT2008-51183   
IGTI  2008  Designing LP Turbines for Optimized Airfoil Lift  Jochen Gier, Matthias Franke, Norbert Hubner, Thomas Schroder  GT2008-51101   
IGTI  2008  Design, Validation and Application of a Radial Cascade for Centrifugal Compressors  Alexander Simpson, Christian Aalburg, Michael Schmitz, Robbert Pannekeet; Florian Larisch; Vittorio Michelassi  GT2008-51262   
IGTI  2008  Design, Fabrication, and Performance of Foil Gas Thrust Bearings for Microturbomachinery Applications  Brian Dykas; Robert Bruckner, Christopher DellaCorte, Brian Edmonds; Joseph Prahl  GT2008-50377   
IGTI  2008  Design, Development and Testing of an In-Engine Radial Traverse System for the Trent Engine  S. J. Anderson; A. J. W. Wilson; K. S. Chaha  GT2008-51332   
IGTI  2008  Design, Development and Test of a 30kW Oil Free, Turbo Alternator  James F. Walton, Hooshang Heshmat, Michael J. Tomaszewski  GT2008-51514   
IGTI  2008  Design Tuning of High Aspect Ratio Shrouded Turbine Blades  Andrey V. Pipopulo, Alexander N. Arkhipov, Igor V. Putchkov  GT2008-50670   
IGTI  2008  Design Procedure of a Novel Micro-Turbine Low NOx Conical Wire-Mesh Duct Burner  Omar B. Ramadan, J. E. Donald Gauthier; Patrick M. Hughes, Robert Brandon  GT2008-50948   
IGTI  2008  Design Optimization of a HP Compressor Rotor Blade and its Hub Endwall  Vicky Iliopoulou, Ingrid Lepot, Philippe Geuzaine  GT2008-50293   
IGTI  2008  Design Optimization and Validation of a Power Turbine Blade for an Aero-Derivative Gas Turbine Upgrade  Paolo Del Turco, Michele D'Ercole, Nicola Pieroni, Massimiliano Mariotti, Francesco Gamberi, William Zemitis  GT2008-51064   
IGTI  2008  Design of an Aggressive Flow-Controlled Turbine Duct  Fredrik Wallin, Lars-Erik Eriksson  GT2008-51202   
IGTI  2008  Design of a New Experimental Rig for Thermal Cyclic Testing of Combustor Liner Tiles  C. Mende; O. Liedtke; A. Schulz, H.-J. Bauer  GT2008-50300   
IGTI  2008  Design of a Low Solidity Flow-Controlled Stator With Coanda Surface in a High Speed Compressor  Y. Guendogdu, A. Vorreiter, J. R. Seume  GT2008-51180   
IGTI  2008  Design of a Highly-Loaded Four-Stage Low-Speed Research Compressor  C. Clemen, H. Schrapp, V. Gummer; R. Muller, K. Vogeler, M. Kunzelmann  GT2008-50254   
IGTI  2008  Design of a Centrifugal Compressor With Low Specific Speed Automotive Fuel Cell  Xinqian Zheng, Yangjun Zhang; Zhiling Qiu; Hong He  GT2008-50468   
IGTI  2008  Design Method of a Subsonic Aspirated Cascade  Antoine Godard, Antoine Fourmaux, Stephane Burguburu; Francis Leboeuf  GT2008-50835   
IGTI  2008  Design Details of a 600 MW Graz Cycle Thermal Power Plant for CO2 Capture  H. Jericha, W. Sanz, E. Goettlich, F. Neumayer  GT2008-50515   
IGTI  2008  Design and Testing of Multistage Centrifugal Compressors With Small Diffusion Ratios  C. Aalburg, A. Simpson, M. B. Schmitz; V. Michelassi, S. Evangelisti, E. Belardini, V. Ballarini  GT2008-51263   
IGTI  2008  Design and Testing of a Vibrating Test Object for Investigating Fluid-Structure Interaction  Nikos Andrinopoulos, Damian Vogt; Jiasen Hu; Torsten H. Fransson  GT2008-50740   
IGTI  2008  Design and Performance Evaluation of a Trigeneration System Incorporating Hydraulic Storage and an Inverted Brayton Cycle  Matthew Blieske, J. E. D. Gauthier, X. Huang  GT2008-50568   
IGTI  2008  Design and Optimization of the Internal Cooling Channels of a HP Turbine Blade: Part II -- Optimization  Sergio Amaral; Tom Verstraete; Rene Van den Braembussche; Tony Arts  GT2008-51080   
IGTI  2008  Design and Optimization of the Internal Cooling Channels of a HP Turbine Blade: Part I -- Methodology  Sergio Amaral; Tom Verstraete, Rene Van den Braembussche, Tony Arts  GT2008-51077   
IGTI  2008  Design and Off-Design Numerical Investigation of a Transonic Double-Splitter Centrifugal Compressor  Michele Marconcini, Filippo Rubechini, Andrea Arnone; Seiichi Ibaraki  GT2008-50759   
IGTI  2008  Design and Flow Analysis of Radial and Mixed Flow Turbine Volutes  Mohammed Hamel, Miloud Abidat, Mohamed K. Hamidou, Hichem T. Cherif, Sid Ali Litim  GT2008-50503   
IGTI  2008  Design and Experimental Verification of Mistuning of a Supersonic Turbine Blisk  Pieter Groth, Clas Andersson, Hans Martensson  GT2008-50677   
IGTI  2008  Derivation of Correlations for Small Turbojet Engines  J. E. Donald Gauthier; Robert Stowe  GT2008-51001   
IGTI  2008  Deposition Near Film Cooling Holes on a High Pressure Turbine Vane  Thomas H. Fletcher, Weiguo Ai, Nathan Murray, Spencer Harding; Scott Lewis, Jeffrey P. Bons  GT2008-50901   
IGTI  2008  Deployment of Low and Zero Emission Fossil Fuel Power Generation in Emerging Niche Markets  Carl-W. Hustad  GT2008-50106   
IGTI  2008  Density Wave Oscillation in a Vertical Type Natural Circulation Heat Recovery Steam Generator: A Numerical Study  Heimo Walter, Wladimir Linzer  GT2008-50035   
IGTI  2008  Degradation Effects on Industrial Gas Turbines  Rainer Kurz; Klaus Brun; Meron Wollie  GT2008-50020   
IGTI  2008  Data Management and Adaptive Machining Technology for Efficient Repair and Manufacture of Turbine Components  Claus Bremer  GT2008-50060   
IGTI  2008  Damping Ratio Estimation Techniques for Rotordynamic Stability Measurements  C. Hunter Cloud; Eric H. Maslen, Lloyd E. Barrett  GT2008-50691   
IGTI  2008  Damage Evolution and Failure Mechanisms for APS-TBCS  Filippo Cappuccini, Iacopo Giovannetti; Suchismita Sanyal; Massimo Giannozzi; Santosh Kumar, T. Shalini, T. Vishwanath  GT2008-50367   
IGTI  2008  Cyclic Carbonation and Calcination Studies of Limestone and Dolomite for CO2 Separation From Combustion Flue Gases  Senthoorselvan Sivalingam, Stephan Gleis; Patrik Yrjas; Spliethoff Hartmut; Mikko Hupa  GT2008-50987   
IGTI  2008  Cycle Selection and Compressor Design of 600kW Simple Cycle Gas Turbine Engine  Marco A. R. Nascimento, Osvaldo Jose Venturini, Electo S. Lora, Guido A. Sierra, Lucilene O. Rodrigues, Hilario M. Carvalho; Newton R. Moura  GT2008-51523   
IGTI  2008  Customer Adapted Maintenance Plan (CAMP): A Process for Optimization of Gas Turbine Maintenance  Mathias Warja; Pontus Slottner; Markus Bohlin  GT2008-50240   
IGTI  2008  Critical Components Life Update for Gas Turbine Engines: Case Study of an International Collaboration  Wieslaw Beres; Donald Fread; Lesley Harris, Philip Haupt; Joanna Kappas; Roger Olson; Philip Reineke; Sansi Robertson; Gordon Stocks  GT2008-50655   
IGTI  2008  Creep Analysis of Cross Wavy Primary Surface Recuperator for Microturbine System  Q. W. Wang, D. J. Zhang, M. Zeng, J. W. Wang  GT2008-51505   
IGTI  2008  Control Performance Study on the Molten Carbonate Fuel Cell Hybrid Systems  Huisheng Zhang, Lijin Wang, Shilie Weng, Ming SU  GT2008-50747   
IGTI  2008  Control of Short Length Scale Rotating Stall Inception on a High-Speed Axial Compressor With Plasma Actuation  Huu Duc Vo; Scott C. Morris, Joshua D. Cameron  GT2008-50967   
IGTI  2008  Continued Enhancement of SGT-600 Gas Turbine Design and Maintenance  Vladimir Navrotsky, Mats Blomstedt, Niklas Lundin, Claes Uebel  GT2008-51143   
IGTI  2008  Considerations of a Double-Wall Cooling Design to Reduce Sand Blockage  Camron C. Land; Karen A. Thole; Chris Joe  GT2008-50160   
IGTI  2008  Conjugate Heat Transfer Study of a Spin Pit Rig: Application to the Lifing of HP Turbine Disc Firtrees  S. Alizadeh, N. Gopinathrao, C. Mabilat; D. Jackson, R. Clarkson  GT2008-51294   
IGTI  2008  Conjugate Heat Transfer Study of a Biaxial Rig: Application to the Lifing of HP Turbine Disc Firtrees  S. Alizadeh, C. Mabilat; D. Jackson, R. Clarson  GT2008-51297   
IGTI  2008  Condition Monitoring of Rotor Using Active Magnetic Actuator  Jerzy T. Sawicki; Michael I. Friswell; Alex H. Pesch, Adam Wroblewski  GT2008-51169   
IGTI  2008  Condition Based Maintenance of Gas Turbines Using Simulation Data and Artificial Neural Network: A Demonstration of Feasibility  Magnus Fast, Mohsen Assadi; Sudipta De  GT2008-50768   
IGTI  2008  Conceptual Design of a Multistage High-Speed Motor Driven Air Compressor  Juha Saari; Jari L. H. Backman; Jouko Peussa  GT2008-51353   
IGTI  2008  Computational Predictions of Endwall Film Cooling for a Turbine Nozzle Vane With an Asymmetric Contoured Passage  Yoji Okita, Chiyuki Nakamata  GT2008-50878   
IGTI  2008  Computational Modelling of Tip Heat Transfer to a Super-Scale Model of an Unshrouded Gas Turbine Blade  Brian M. T. Tang, Pepe Palafox, Martin L. G. Oldfield, David R. H. Gillespie; Brian Y. Cheong  GT2008-51212   
IGTI  2008  Computational Investigations Into Aero-Engine Bearing Chamber Off-Take Flows  Adam Robinson, Herve Morvan, Carol Eastwick  GT2008-50634   
IGTI  2008  Computational Fluid Dynamic Prediction of Noise From a Cold Turbulent Propane Jet  Tanya S. Stanko, Mohamed Pourkashanian, Michael Fairweather, Derek B. Ingham  GT2008-50834   
IGTI  2008  Computational and Experimental Investigations of Jet Noise Reduction Concepts for Low-Bypass Ratio Military Gas Turbine Engines  N. Sinha, R. J. Ungewitter, D. C. Kenzakowski, S. M. Dash; J. M. Seiner  GT2008-50091   
IGTI  2008  Computational Aerodynamic Performance on Radial and Mixed-Flow Design Options for a High Specific Speed Turbine  Jong Sik Oh, Charles W. Buckley, Giri L. Agrawal  GT2008-50714   
IGTI  2008  Computation of the Flow Field of Transonic Axial Compressor by Steady Arbitrary Lagrangian Eulerian Formulation  Adel Ghenaiet, Nouredine Djeghri  GT2008-50339   
IGTI  2008  Compressor Wake/Leading-Edge Interactions at Off Design Incidences  Andrew P. S. Wheeler; Robert J. Miller  GT2008-50177   
IGTI  2008  Compressor Casing Preliminary Design Based on Features  Stefan Bretschneider, Frank Rothe, Martin G. Rose, Stephan Staudacher  GT2008-50102   
IGTI  2008  Compliant Hybrid Journal Bearings Using Integral Wire Mesh Dampers  Bugra H. Ertas  GT2008-50984   
IGTI  2008  Compliant Foil Journal Bearing Performance at Alternate Pressures and Temperatures  Robert J. Bruckner, Benadette J. Puleo  GT2008-50174   
IGTI  2008  Comparison the Cooling Performance of Cylindrical and Fan-Shaped Cooling Holes With Special Emphasis on the Effect of Internal Coolant Cross-Flow  Christian Saumweber; Achmed Schulz  GT2008-51036   
IGTI  2008  Comparison of URANS and LES CFD Methodologies for Air Swirl Fuel Injectors  Adrian Spencer, David Dunham, James J. McGuirk, Mehriar Dianat  GT2008-50278   
IGTI  2008  Comparison of RANS Turbulence Models for Prediction of Film Cooling Performance  Katharine L. Harrison, David G. Bogard  GT2008-51423   
IGTI  2008  Comparison of Numerical Investigations With Measured Heat Transfer Performance of a Film Cooled Turbine Vane  D. Charbonnier; Th. Kobke; P. Ott, M. Jonsson; F. Cottier  GT2008-50623   
IGTI  2008  Comparison of Microturbines and Reciprocating Engine Generator Sets  Stephen Gillette  GT2008-51365   
IGTI  2008  Comparison of Experimental and Numerical Results Concerning the Damping of Perforated Liners With Bias Flow  Claus Heuwinkel, Bernd Muhlbauer; Stefan Busse; Lars Enghardt, Berthold Noll, Manfred Aigner, Ingo Rohle  GT2008-50585   
IGTI  2008  Comparison of Discharge Coefficient Measurements and Correlations for Several Orifice Designs With Cross-Flow and Rotation Around Several Axes  M. Huning  GT2008-50976   
IGTI  2008  Comparison of a Conventional Thermal Analysis of a Turbine Cascade to a Full Conjugate Heat Transfer Computation  Christoph Starke, Erik Janke; Tomas Hofer, Davide Lengani  GT2008-51151   
IGTI  2008  Comparison Between Hot Wire and 5-Hole Pressure Probe Traverse Data in a Variable Density Two-Stages Air Turbine  Alberto D'Ovidio, Lucy Littlewood, F. Congiu, P. Ruffino, T. Mokulys  GT2008-50753   
IGTI  2008  Comparative Study of Fin-and-Tube Heat Exchangers With Various Fin Patterns  Q. W. Wang, L. H. Tang, G. N. Xie, M. Zeng, M. Lin  GT2008-51504   
IGTI  2008  Compact Combustion Systems Using a Combination of Trapped Vortex and High-G Combustor Technologies  J. Zelina, W. Anderson, D. T. Shouse, P. Koch  GT2008-50090   
IGTI  2008  Combustion Simulation of an EGR Operated Micro-Gas Turbine  Maria Cristina Cameretti, Renzo Piazzesi, Fabrizio Reale, Raffaele Tuccillo  GT2008-50692   
IGTI  2008  Combustion Performance of Biodiesel and Diesel-Vegetable Oil Blends in a Simulated Gas Turbine Burner  Heena V. Panchasara, Benjamin M. Simmons, Ajay K. Agrawal, Scott K. Spear, Daniel T. Daly  GT2008-51496   
IGTI  2008  Combustion Characteristics of Hydrogen-Methane Hybrid Fuels in Coflow Jet Diffusion Flames  Hui Wu, Wenxing Zhang, Kejin Mu, Yue Wang, Yunhan Xiao  GT2008-50958   
IGTI  2008  Combustion Characteristics of a Can Combustor With a Rotating Casing for an Innovative Micro Gas Turbine  Hsin-Yi Shih, Chih-Zong Liu  GT2008-50116   
IGTI  2008  Combining Lead Functions and Logistic Regression for Predicting Failures on an Aircraft Engine  David J. Bryg, George Mink, Link C. Jaw  GT2008-50118   
IGTI  2008  Combined-Cycle Power Plant Maintenance Costs  Dale S. Grace  GT2008-51357   
IGTI  2008  Combined Cycle Power Plant Long Term Preservation Program: The Araucaria Power Station Study Case  Fernando Cavalcanti de Albuquerque, Jean Carlos Nunes Ferreira, Marcos de Freitas  GT2008-50405   
IGTI  2008  CO2 Capture and Sequestration Options: Impact on Turbo-Machinery Design  Justin Zachary, Sara Titus  GT2008-50642   
IGTI  2008  Clearance Reduction and Performance Gain Using Abradable Material in Gas Turbines  Iacopo Giovannetti, Manuele Bigi, Massimo Giannozzi, Marco Romanelli; Dieter R. Sporer; Filippo Cappuccini  GT2008-50290   
IGTI  2008  Chemical Kinetic Analysis of a Flameless Gas Turbine Combustor  G. Arvind Rao, Yeshayahou Levy; Ephraim J. Gutmark  GT2008-50619   
IGTI  2008  Characterization of Foil Bearing Structure for Increasing Shaft Temperatures: Part II -- Dynamic Force Performance  Tae Ho Kim; Anthony W. Breedlove; Luis San Andres  GT2008-50570   
IGTI  2008  Characterization of Foil Bearing Structure for Increasing Shaft Temperatures: Part I -- Static Load Performance  Tae Ho Kim; Anthony W. Breedlove; Luis San Andres  GT2008-50567   
IGTI  2008  Characterization of Advanced Combustor Cooling Concepts Under Realistic Operating Conditions  Thomas Behrendt; Miklos Gerendas; Timea Lengyel, Christoph Hassa  GT2008-51191   
IGTI  2008  Characterization of a Real Size Retrofittable Catalytic Combustion System  Olaf Diers, Denis Schneider, Christoph Hassa, Johan Koopman, Johannes Heinze, Michael Fischer; Markus J. Friedl; Richard Carroni  GT2008-50516   
IGTI  2008  Characteristics of Several Steam and Nitrogen Diluted Methods on Hydrogen-Riched Medium Heating Value Syngas Fuel Diffusion Flame  Gang Xu, Bin Yu, Quan Liu, Aibing Fang; Yan Zhang; Chaoqun Nie  GT2008-50879   
IGTI  2008  CFD Simulation of Noise in Gas Turbine Combustors by Means of Turbulence Refluctuation Method  Stefano Tiribuzi  GT2008-50241   
IGTI  2008  CFD Simulation of Jet Pulsation Effects on Film Cooling of Flat Plates  Olga Kartuzova, Daniel Danila, Mounir B. Ibrahim; Ralph J. Volino  GT2008-50284   
IGTI  2008  CFD Predictions of Low NOx Radial Swirlers With Vane Passage Fuel Injection With Comparison With Internal Gas Analysis Flame Composition  Phil T. King, Gordon E. Andrews, Mohammed M. Pourkashanian, Andrew C. McIntosh; Nick H. Escott  GT2008-51138   
IGTI  2008  CFD Investigation on the Circumferential Grooves Casing Treatment of Transonic Compressor  Xudong Huang, Haixin Chen, Song Fu  GT2008-51107   
IGTI  2008  CFD and Thermo-Mechanical Analysis for Heat Exchanger Used in Aero Engine  Ho Seung Jeong, Jong Rae Cho, Lae Sung Kim, Man Yeong Ha, Ji Hwan Jeong, Kui Soon Kim; Torbjorn Lindquist, Philip P. Walsh  GT2008-50447   
IGTI  2008  CFD Analysis of the Flow Through Tube Banks of HRSG  Marco Torresi; Alessandro Saponaro; Sergio Mario Camporeale, Bernardo Fortunato  GT2008-51300   
IGTI  2008  Ceramic Gas Turbine Development: Need for a 10-Year Plan  Mark Va Rroode  GT2008-51378   
IGTI  2008  CBM Integrated Maintenance Scheduler  Simon Jessop, Scott Valentine, Michael Roemer  GT2008-51375   
IGTI  2008  Cavity Effects on the Design of Turbine Profiled End Walls  Fernando Gisbert, Roque Corral, Carlos Lopez, Juan Mauricio Chia  GT2008-51136   
IGTI  2008  Casing Treatment and Blade Tip Configuration Effects on Controlled Gas Turbine Blade Tip/Shroud Rubs at Engine Conditions  Corso Padova, Michael G. Dunn, Jeffery Barton; Kevin Turner, Alan Turner, Darin DiTommaso  GT2008-50112   
IGTI  2008  Calibration of CFD Model for Mist/Steam Impinging Jets Cooling  Ting Wang, T. S. Dhanasekaran  GT2008-50737   
IGTI  2008  Broadband Entropy Noise Phenomena in a Gas Turbine Combustor  Andre Fischer, Friedrich Bake, Ingo Rohle  GT2008-50263   
IGTI  2008  Breaking the Swirl With Brush Seals: Numerical Modeling and Experimental Evidence  Peter Helm, Alexander Pugachev; Matthias Neef  GT2008-50257   
IGTI  2008  Breakdown of the Tip Clearance Vortex in a Rotor Equivalent Cascade and in a Single-Stage Low-Speed Compressor  Henner Schrapp, Udo Stark, Horst Saathoff  GT2008-50195   
IGTI  2008  Boundary Layer Control in a Compressor Cascade Using Distributed Suction  Utpal Chakraborthy, A. M. Pradeep  GT2008-50225   
IGTI  2008  Blade-Shaft Coupled Resonance Vibration by Using Active Magnetic Bearing Excitation  Norihisa Anegawa, Hiroyuki Fujiwara, Osami Matsushita  GT2008-50904   
IGTI  2008  Blade Vibration Phenomena of HPC Bliscs Considering Manufacturing Effects and Strain Gauge Application  T. Klauke, A. Kuhhorn, B. Beirow; R. Parchem  GT2008-50683   
IGTI  2008  Blade Row Interaction in a One and a Half Stage Transonic Turbine Focusing on Three Dimensional Effects: Part II -- Clocking Effects  O. Schennach; B. Paradiso, G. Persico, P. Gaetani; J. Woisetschlager  GT2008-50065   
IGTI  2008  Blade Row Interaction in a One and a Half Stage Transonic Turbine Focusing on Three Dimensional Effects: Part I -- Stator-Rotor Interaction  B. Paradiso, G. Persico, P. Gaetani; O. Schennach, R. Pecnik, J. Woisetschlaeger  GT2008-50291   
IGTI  2008  Blade Lean and Shroud Leakage Flows in Low Aspect Ratio Turbines  Budimir Rosic, Liping Xu  GT2008-50565   
IGTI  2008  Benefits of Active Compressor Stability Management on Turbofan Engine Operability  Yuan Liu, Manuj Dhingra, J. V. R. Prasad  GT2008-51307   
IGTI  2008  Benchmarking Gas Path Diagnostic Methods: A Public Approach  Donald L. Simon; Jeff Bird, Craig Davison; Al Volponi; R. Eugene Iverson  GT2008-51360   
IGTI  2008  Basic Architecture and Sizing of Commercial Aircraft Gas Turbine Oil Feed Systems  Ken Hart  GT2008-50450   
IGTI  2008  Axial-Transverse Coupled Vibration Analysis of a Swinging Roller-Follower CAM Due to Flexible Follower Rod  J. R. Chang, M. C. Huang  GT2008-51082   
IGTI  2008  Axial Turbine Blade Aerodynamic Optimization Using a Novel Multi-Level Genetic Algorithm  Ozhan Oksuz, Ibrahim Sinan Akmandor  GT2008-50519   
IGTI  2008  Axial Load Control on High-Speed Turbochargers. Test and Prediction  Kostandin Gjika, Gerald D. LaRue  GT2008-50756   
IGTI  2008  Automated Preliminary Structural Rotor Design Using Genetic Algorithms and Neural Networks  S. Dominique, J.-Y. Trepanier  GT2008-51181   
IGTI  2008  Automated Methods to Calibrate a High-Fidelity Thrust Deck to Aid Aeropropulsion Test and Evaluation  Jeffrey F. Monaco; David S. Kidman; Donald J. Malloy; David G. Ward, James F. Gist IV  GT2008-50213   
IGTI  2008  Asymptotic Description of Maximum Mistuning Amplification of Bladed Disk Forced Response  Carlos Martel; Roque Corral  GT2008-50822   
IGTI  2008  Assessment of Models for Liquid Jet Breakup  Paul S. Hutcheson, John W. Chew, Rex B. Thorpe; Colin Young  GT2008-50649   
IGTI  2008  Assessment of Different Actuator Concepts for Acoustic Boundary Control of a Premixed Combustor  Mirko R. Bothien, Jonas P. Moeck, Christian Oliver Paschereit  GT2008-50171   
IGTI  2008  Assessing of Hot Gas Parts Using Advanced Eddy Current Testing Methods  Matthias Jungbluth; Vinay Jonnalagadda, Erwan Baleine, Paul Zombo; Rolf Wilkenhoner; Mattias Broddegard  GT2008-51535   
IGTI  2008  Are Advanced Large Gas Turbine Ready for Use in Captive Applications?  Justin Zachary  GT2008-50720   
IGTI  2008  Application of the Transient Heater Foil Technique for Heat Transfer and Film Cooling Effectiveness Measurements on a Turbine Vane Endwall  M. Jonsson, D. Charbonnier, P. Ott; J. von Wolfersdorf  GT2008-50451   
IGTI  2008  Application of the Systematic Sensor Selection Strategy for Turbofan Engine Diagnostics  T. Shane Sowers; George Kopasakis, Donald L. Simon  GT2008-50525   
IGTI  2008  Application of Numerical Analysis Tools for Airframe-Propulsion Integrated Test and Evaluation  Milt W. Davis Jr., Alan A. Hale; Charles Vining; William T. Cousins  GT2008-50194   
IGTI  2008  Application of Detached Eddy Simulation in a Subsonic Compressor Rotor  Chunwei Gu, Fan Feng, Xuesong Li, Meilan Chen  GT2008-50203   
IGTI  2008  Application of Delayed Detached Eddy Simultaion and RANS Models in the Compressor Cascade Flow  Meilan Chen, Xuesong Li, Chunwei Gu, Fan Feng  GT2008-50040   
IGTI  2008  Application of CFD to Assess the Performance of a Novel Pre-Swirl Configuration  G. D. Snowsill, C. Young  GT2008-50684   
IGTI  2008  Application of Casing Circumferential Grooves to Counteract the Influence of Tip Clearance  Victor Mileshin, Andrew Startsev, Igor Brailko  GT2008-51147   
IGTI  2008  Application of an Object-Oriented CFD Code to Heat Transfer Analysis  Luca Mangani, A. Andreini  GT2008-51118   
IGTI  2008  Application of an Enhanced 1D Network Model to Calculate the Flow Properties of a Pre-Swirl Secondary Air System  F.-K. Benra, H. J. Dohmen; O. Schneider  GT2008-50442   
IGTI  2008  Application of a 3D Blade Design Method for Supersonic Vaneless Contra-Rotating Turbine  Xiang-Jun Fang, Si-Yong Liu, Wei-Jun Zhang, Ping Wang  GT2008-50510   
IGTI  2008  Applicability of Neuber's Rule for Thermomechanical Fatigue  Ali P. Gordon, Eric P. Williams, Michael Schulist  GT2008-51358   
IGTI  2008  API 617's Requirements on Centrifugal Compressors: A Purchaser's Viewpoint  Mahdi Taherimoghaddam  GT2008-50138   
IGTI  2008  Analytical and Numerical Simulation of the Two Phase Flow Heat Transfer in the Vent and Scavenge Pipes of the Clean Engine Demonstrator  Michael Flouros  GT2008-50130   
IGTI  2008  Analysis on Dynamic Characteristics of Gas Turbine Rotor Considering Contact Effects and Pre-Tightening Force  Qi Yuan, Rui Gao, Zhenping Feng; Jianlu Wang  GT2008-50396   
IGTI  2008  Analysis of the Effects of Pulsations on the Operational Stability of Centrifugal Compressors in Mixed Reciprocating and Centrifugal Compressor Stations  Klaus Brun; Rainer Kurz  GT2008-50540   
IGTI  2008  Analysis of the Biomass Integrated Combined Cycles With Two Different Structures of Gas Turbines  Sebastian Lepszy, Tadeusz Chmielniak  GT2008-50317   
IGTI  2008  Analysis of Stalled Compressor and Application to a Nuclear Gas Turbine Plant  N. Tauveron  GT2008-51240   
IGTI  2008  Analysis of Stall Precursors and Determination of Optimum Signal Processing Methods for an LM-2500 Gas Turbine  Knox T. Millsaps, Jeffrey S. Patterson; Daniel E. Caguiat; Gustave C. Dahl  GT2008-50575   
IGTI  2008  Analysis of NOx Formation in a Hydrogen Fueled Microturbine Generator  Vincent McDonell, Peter Therkelsen, Tavis Werts, Scott Samuelsen  GT2008-50841   
IGTI  2008  Analysis of Noise Generated by Low Solidity Cascade Diffuser in a Centrifugal Blower  Daisaku Sakaguchi, Masahiro Ishida, Hironobu Ueki; Hiroshi Hayami; Yasutoshi Senoo  GT2008-50750   
IGTI  2008  Analysis of Lumped Deterministic Source Terms and Their Sub-Components in a Stage 1 High Pressure Turbine Rotor  Jon Ratzlaff, Paul D. Orkwis; Christopher Noll; Gary Steuber  GT2008-51473   
IGTI  2008  Analysis of Intermediate Temperature Combined Cycles With a Carbon Dioxide Topping Cycle  R. Chacartegui, D. Sanchez, F. Jimenez-Espadafor, A. Munoz, T. Sanchez  GT2008-51053   
IGTI  2008  Analysis of Cooling Effectiveness and Heat Transfer Variations on the End Wall of a Nozzle Guide Vane Caused by Turbine Leakage Flows  Axel Dannhauer  GT2008-50555   
IGTI  2008  Analysis and Optimization of the Coupled Parameters of the Graz Cycle  Brentan R. Alexander, Ahmed F. Ghoniem  GT2008-50588   
IGTI  2008  Analyses and Optimization of a Propulsion Cycle for Unmixed High Bypass Turbofan  Adel Ghenaiet  GT2008-50340   
IGTI  2008  An Optimization Technique for Radial Compressor Impellers  Michael Casey; Chris Robinson; Frank Gersbach  GT2008-50561   
IGTI  2008  An Object-Oriented Parallel Finite: Volume CFD Code  Dulceneia Becker, Joao Roberto Barbosa, Jesuino Takachi Tomita  GT2008-51187   
IGTI  2008  An Object-Oriented Computer Code for Aircraft Engine Weight Estimation  Michael T. Tong; Bret A. Naylor  GT2008-50062   
IGTI  2008  An Investigation on Dynamic Characteristics of a High Speed Rotor With Complex Structure for Microturbine Test Rig  Di Zhang, Yonghui Xie, Zhenping Feng  GT2008-50411   
IGTI  2008  An Investigation of the Flow Physics of Vane Clocking Using Unsteady Flow Measurements  Nicole L. Key, Patrick B. Lawless, Sanford Fleeter  GT2008-51091   
IGTI  2008  An Integrated Approach to Gas Turbine Monitoring and Diagnostics  Igor Loboda; Sergey Yepifanov; Yakov Feldshteyn  GT2008-51449   
IGTI  2008  An Innovative Passive Tip-Leakage Control Method for Axial Turbines: Linear Cascade Wind Tunnel Results  Markus Hamik, Reinhard Willinger  GT2008-50056   
IGTI  2008  An Innovative Gas Turbine Cycle With Methanol Fueled Chemical-Looping Combustion  Hongguang Jin, Xiaosong Zhang, Hui Hong, Wei Han  GT2008-50658   
IGTI  2008  An Experimental Study on Droplet Generation in Bearing Chambers Caused by Roller Bearings  P. Gorse, K. Dullenkopf, H.-J. Bauer, S. Wittig  GT2008-51281   
IGTI  2008  An Experimental Study of Vane Clocking Effects on Embedded Compressor Stage Performance  Nicole L. Key, Patrick B. Lawless, Sanford Fleeter  GT2008-51087   
IGTI  2008  An Experimental Investigation of the Wake Shed From a High-Lift Low Pressure Turbine Cascade at Different Reynolds Numbers  Francesca Satta, Marina Ubaldi, Pietro Zunino; Claudia Schipani  GT2008-51157   
IGTI  2008  An Experimental Investigation of Passive Control Device: Blade Wake Interaction on a Ultra High Lift Turbine Profile  Daniele Simoni, Marina Ubaldi, Pietro Zunino; Francesco Bertini, Ennio Spano  GT2008-51194   
IGTI  2008  An Experimental Investigation of Airfoil Performance in Wet Gas Flow  Trond G. Gruner, Lars E. Bakken; Lars Brenne, Tor Bjorge  GT2008-50483   
IGTI  2008  An Entropy Based Evaluation of Efficiency of a Transonic Compressor Rotor With Water Injection  Istvan Szabo, Mark G. Turner  GT2008-50248   
IGTI  2008  An Approach to Maintenance Cost Estimation for Aircraft Engines  Myoungcheol Kang; Stephen Ogaji, Pericles Pilidis; Changduk Kong  GT2008-50564   
IGTI  2008  An Analytical Approach to Support High Cycle Fatigue Validation for Turbocharger Turbine Stages  Tom Heuer, Marc Gugau; Paul Anschel; Achim Klein  GT2008-50764   
IGTI  2008  An Analytical Approach for Gas Turbine Parameter Corrections  Vasileios E. Kyritsis, Pericles Pilidis  GT2008-50716   
IGTI  2008  An Analytic Model of Oil-Film Force on Hydrodynamic Journal Bearing of Finite Length  Jin Fu Yang; Sheng Bo Yang; Chen Ce; Da Ren Yu, Ying Cui; Kun Yang, Zhong Guang Fu  GT2008-50251   
IGTI  2008  An Analysis of the Motion of a Centrifugal Impeller in Overspeed Test  Richard J. Gozdawa; Alfred W. Crook  GT2008-50699   
IGTI  2008  An Aerodynamic Optimization Procedure for the Preliminary Design of Centrifugal Compressor Stages  Omar Elshamy; Nidal Ghizawi, Celine Yon, Simone Pazzi, Denis Guenard  GT2008-51154   
IGTI  2008  An Advanced Optimization Procedure for the Thermodynamic Selection of Centrifugal Compressors Stages  Simone Pazzi, Marco Giachi, Massimo Pusceddu, Nidal Ghizawi; Ashraf Al Musleh  GT2008-50702   
IGTI  2008  An Acoustic Modal Analysis of a DLE Combustion System  Lingli Yu, Mick Cashmore  GT2008-51075   
IGTI  2008  Aircraft Engine On-Line Diagnostics Through Dual-Channel Sensor Measurements: Development of an Enhanced System  Takahisa Kobayashi; Donald L. Simon  GT2008-50346   
IGTI  2008  Aircraft Engine On-Line Diagnostics Through Dual-Channel Sensor Measurements: Development of