Search form for published papers in conferences related to rotordynamics.

Provided by Rotating Machinery Analysis, Inc.

Return to www.rotordynamics.org

List of conferences in the data base.

Enter search criteria
Conferences
Paper Title:
Paper Author:
From year:
To year:
Records per page:
Items found: 1100 
After performing a search, to obtain a hardcopy of an article or entire proceeding try clicking on the link in the first column, which shows the name of the conference sponsor.
Papers
Conference Year Paper Title Paper Author Page Number Other
ISROMAC  1996  Influence of the Bearings Defects on the Dynamical Behavior of an Elastic Shaft  Olivier Bonneau and Jean Frene  328   
ISROMAC  1996  Improvement of Stability of Rotor System by Introducing a Hydraulic Damper into an Active Journal Bearing  J._. Krodkiewski, Y. Cen and L. Sun  719   
ISROMAC  1996  Frictional Damping on the Dynamic Behaviour of Composite Blades  Ting-Nung Shiau and Yung-Dann Yu  262   
ISROMAC  1996  Advanced Computer Simulation of Rotating Machinery Probabilistic Critical speed Determination by Receptance Based Reanalysis  Timothy S. Barrett, Alan B. Palazzolo and Albert F. Kascak  272   
ISROMAC  1996  An Efficient Method for Computation of Unbalance Responses of Rotor Bearing Systems  Jong-Heuck Park and Seong-Wook Hong  289   
ISROMAC  1996  Computer Modelling of a Gas Centrifuge  Musa Al-Ajlouni, Andy Hitchings and Nick Syred  299   
ISROMAC  1996  Dependence on Blade Arrangements of Mistuned Bladed Disc of the Optimal and Critical Resonant Responses  H. Yiu and D.J. Ewins  237   
ISROMAC  1996  Effects of Stagger and Pretwist Angles on the Vibration of Flexible Shaft-Bladed Disk Systems  Sang-Bok Chun and Chong-Won Lee  318   
ISROMAC  1996  Vibration of Pretwisted Cantilever Shallow Conical Shells of Non-Uniform Cross-Section  C.W. Lirn, S. Kitipornchai and K.M. Liew  227   
ISROMAC  1996  Analysis on the Coupled Vibration of Rotor and Casing of a Vertical Shaft Pump by Using Substructure Synthesis Method  Shijie Guo, Masato Tano and Yoichi Kanemitsu  337   
ISROMAC  1996  Torsional Vibration Analysis of Rotor System Using Modified Mass Matrix  J.P. Hong and L.E. Barrett  347   
ISROMAC  1996  PC-Based Simulation and Animation of Turbomachinery Vibration  R.G. Kirk, K. V.S. Raju and K. Ramesh  357   
ISROMAC  1996  Rotordynamics on the pc: Transient Analysis with ARDS  David P. Fleming  307   
ISROMAC  1996  Solid Particle Erosion Resistance and Fatigue Characteristics of Two Selected Thermal Spray Chromium Carbide Coatings  JM Quets, RC. Tucker, Jr. and AA Ashary  376   
ISROMAC  1996  Modeling of Compressor Performance Deterioration Due to Erosion  A Hamed, W. Tabakoff and D. Singh  386   
ISROMAC  1996  Investigation about Electrorheological Squeeze Film Damper Applied to Active Control of Rotor Dynamic  Benjamin Pecheux, Olivier Bonneau and Jean Frene  309   
ISROMAC  1996  Determination of Three-Dimensional Forces and Torques in an Impulse Turbine  Anand M. Sharan and Sunil Agarwal  159   
ISROMAC  1996  Nonlinear Simulation of Lateral Vibration of an Experimental Rotor-Journal Bearing System  Zhiming Zhang and Zhigang Li  97   
ISROMAC  1996  Optimum Balancing of Rotating Machinery Using Genetic Algorithm  Won-Ho Choi, Bo-Suk Yang and Ho-Jin Joo  106   
ISROMAC  1996  An Algorithm for the Computation of Imbalance Change in Rotating Machines  Jie Ding  116   
ISROMAC  1996  An Analysis of the Vibration due to the Wheel Imbalance in a Single Wheelset Suspension System  Young-Hyu Choi, Chee-Ryong Joe and Jin-Min Choi  123   
ISROMAC  1996  An Algorithm for Crack Orientation Identification on a Rotor  Oh Sung Jun and Chong-Won Lee  133   
ISROMAC  1996  Blade Stresses and Life Estimation Under Flow Path Excitation  Nalinaksh S. Vyas, K. V. Subba Rao and J.S. Rao  252   
ISROMAC  1996  Nonlinear Multibody Formulation for Rotorcraft Analysis  Nam-Kook Kang  149   
ISROMAC  1996  Performance Assessment of Low Solidity Vaned Diffusers for Centrifugal Compressors  Abraham Engeda  417   
ISROMAC  1996  Performance Prediction of Rotating Machinery Having Power Split/Circulated Transmission  Han-Sang Jo, Wook-Jin Jang, Jang-Moo Lee, Yeong " Park and Weon-Sig Lim  169   
ISROMAC  1996  Shape Design of Disk Cam Mechanisms Using Instant Velocity Centers  Joong-Ho Shin, Choon-Man Lee and Jong-Soo Kim  178   
ISROMAC  1996  Experimental Modal Analysis of a Hard Disk Drive Spindle Carrying Multiple Disks  Monty Low and LY. Shen  187   
ISROMAC  1996  Identification of the Quadrature Resonances Using Modal Nonsynchronous Perturbation Testing and Dynamic Stiffness Approach for an Anisotropic Rotor System with Fluid Interaction  Eungu Jang, Agnes Muszynska, Young-Pil Park and Chang-Ho Kim  195   
ISROMAC  1996  A Computer Program Package for Forced Vibration and Life Estimation of Tuned and Mistuned Bladed Discs  R. Rzadkowski  205   
ISROMAC  1996  Vibration Analysis of Rotating Laminated Composite Blades Using a Finite Element Technique  Georges Jacquet-Richardet and Pascal Swider  217   
ISROMAC  1996  Problem on the Vibration Measurement on a Turbo-Generator Shaft with an Eddy Current Probe  Shao Yasheng, Wei Yougen and Tang Qing  143   
ISROMAC  1996  Dynamic Coefficients of Submerged Electro-Rheological Bingham-like Fluid Journal Bearing  Siyoul Jang and John A. Tichy  659   
ISROMAC  1996  Equivalent Stiffness and Damping Coefficients of a Digitally Controlled Active Magnetic Bearing  Jeong-Han Ko, Hyun-Seok Yang, Sang-Jo Lee and Young-Pil Park  593   
ISROMAC  1996  A Hydrodynamic Bearing-Rotor System Controlled by Active Magnetic Bearing for Stability Improvement  Sung-Cheon jung, Yoon Joung, Ki-Young Lee, In-Bae Chang and Dong-Chul Han  603   
ISROMAC  1996  Novel Magnetic Bearings for a Flywheel Energy Storage System  H. Ming Chen and James Walton  613   
ISROMAC  1996  Navigational Instruments with Magnetically Suspended Inertial Masses  Zdzislaw Gosiewski, Tomasz Grzegorczyk and Krzysztof Falkowski  622   
ISROMAC  1996  Dynamic Characteristics of a Pad Journal Bearing  Mel Human     
ISROMAC  1996  Advanced Compressor Loss Correlations, Part I : Theoretical Aspects  M. T. Schobeiri  395   
ISROMAC  1996  A Comparison of Two and Three Dimensional Flow and Pressure Patterns in a Hydrostatic Journal Bearing Pocket  M. Dzodzo and M.J. Braun  650   
ISROMAC  1996  Lubrication Design of a Piston-Ring Pack  Yeau-Ren jeng  563   
ISROMAC  1996  Modelling of Oil Flow with Free Surface in the Oilwell Tube of Self-Contained Bearing Assemblies  Y. Piao and K. Brockwell  669   
ISROMAC  1996  Hydrodynamic Characteristics of Combination Pad Journal Bearings  Dong Xu Li and Tom J. O\alko  679   
ISROMAC  1996  Experimental Study on a Five-Pad Tilting Pad Journal Bearing Working in Laminar and Turbulent Regions  Hyun Cheon Ha, Seong Heon Yang, Ho Jong Kim and Hyung Hyun Byun  688   
ISROMAC  1996  A Design of High Speed Air Bearing  Museok Song and Young-Ie Lee  695   
ISROMAC  1996  Dynamic and Stability Analyses of Foil Journal Bearings  Xu Shangxian and Wang Zhaowu  705   
ISROMAC  1994  Dynamics of Vertical Axis Wind Turbines (Darrieus Type)  El-Sayed, A. F.; Hirsch, C.; Derdelinckx, R.  146-164  CN038956966 
ISROMAC  1996  Numerical Studies of the Flow in a Hydrostatic Pocket and its Feed Restrictor  M.J. Braun and M. Dzodzo  640   
ISROMAC  1996  Quantification of Gear Tooth Damage by Optimal Tracking of Vibration Signatures  F .K. Choy, R.J. Veillette, V. Polyshchuk, M.J. Braun and R.C. Hendricks  503   
ISROMAC  1996  Bearing Alignment Estimation in Rotating Machinery  Tom J. Chalko and Dong-Xu Li  68   
ISROMAC  1996  A Combined Experimental and 2-D Computational Study on Trailing Edge Ejection with Different Cooling Gases  D. Bohn, V. Becker, K. Behnke and H. Schonenborn  427   
ISROMAC  1996  The Effect of Tip Clearance on the Performance of a Centrifugal Impeller in the First and Third Quadrant  Abraham Engeda  437   
ISROMAC  1996  Erosion and Wear Characteristics of Submersible Pump Components by Sand Particles  Jae-Keun Lee, Wam-Gyu Park, joo-Hong Park, Tae-Bin Lim, Tae-Lyong Song, Se-Min Oh, Duck-Hwan Kim and Soo-Kil Park  445   
ISROMAC  1996  Development of an Off-Line Expert System for Condition Monitoring of an Aircraft Engine  J.S. Roo, A Chawla and C. Dattagupta  455   
ISROMAC  1996  Fault Diagnostics and Prognostics for Rotating Machinery  KamW.Ng   464   
ISROMAC  1996  Lyapunov-Based Vibration Control for Unbalanced Rotor Systems with Magnetic Bearings  Li-Farn Yang and Chin-Cheng Li  583   
ISROMAC  1996  Continuum Fatigue Damage Modeling for Critical Design, Control and Fault Prognosis  Carl F. Lorenzo  482   
ISROMAC  1996  The Improved Model for an Annular Honeycomb Seal Analysis Using a Two-Control Volume  T.W. Ha and D.W. Childs  573   
ISROMAC  1996  Non-Linear Transient Analysis of Oil Ring Seals for High Pressure Centrifugal Compressors Using Finite Element Method  S.K. Baheti and R.G. Kirk  514   
ISROMAC  1996  Influence of Parameter Variation on Grooved Turbulent Pump Seal Characteristics  P. Materny, R.G. Kirk and K. W. Wilkes  524   
ISROMAC  1996  A Study on the Fluid Moment Characteristics of Pump Annular Seal  Yuji Kanemori and T akuzo lwatsubo  532   
ISROMAC  1996  Analysis of Seal Leakage Characteristics for High Speed Spindle  Byung O Chul Na, Keyoung Jin Chun and Dong-Chul Han  542   
ISROMAC  1996  Numerical Simulation of Flow in a Whirling Annular Seal and Comparison with Experiments  MM. Athavale, R.C.Hendricks and BM Steinetz,  552   
ISROMAC  1996  Advanced Compressor Loss Correlations, Part II : Experimental Verifications  M. T. Schobeiri  410   
ISROMAC  1996  An Assessment of Turbomachinery Condition Monitoring and Failure Prognosis Technology  Henry C. Pusey and Thomas A Moran  472   
ISROMAC  1994  Visualization and Image Processing of the Flow in and around a Savonius Rotor  Fujisawa, N.; Taguchi, Y.  461-471  CN038957211 
ISROMAC  1994  Dynamic Response of the Flexspline in Dual-Roller Harmonic Drives  Carney, T.; Farhang, K.  370  CN038957144 
ISROMAC  1994  Constructive Modifications for Control of Severe Erosion on Impellers of Centrifugal Pumps for Fertilizer Slurries  zarea, S.; Martinez, M. A.  371-382  CN038957156 
ISROMAC  1994  Application of Neural Networks to Quantitative Flow Visualization  Kimura, I.; Kuroe, Y.; Ozawa, M.  383-394  CN038957168 
ISROMAC  1994  Observation of the Shape and Size of Bubbles Generated in a Molten Metal Bath using an X-ray Fluorescope  Iguchi, M.; Uemura, T.; Takanashi, N.; Ogawa, Y.; Tokumitsu, N.; Morita, Z.  395-407  CN038957170 
ISROMAC  1994  Pattern Tracking Algorithm Using Successive Abandonment  Kaga, A.; Inoue, Y.; Yamaguchi, K.  408-422  CN038957181 
ISROMAC  1994  A Three Dimensional Turbulent Boundary Layer Analysis for Turbomachinery Applications  Amorim, J. C. C.  527-537  CN038957284 
ISROMAC  1994  Digital PTV Measurements of a Separated Air Flow behind a Backward Facing Step  Adachi, T.; Nishino, K.; Torii, K.  441-460  CN038957200 
ISROMAC  1994  Dynamics of Multi-Disk Rotors Containing a Transverse Symmetrical Crack  Mioduchowski, A.  348  CN038957119 
ISROMAC  1994  Application of Image Processing Measurement to a Relative Flow in a Pump-Turbine Runner  Hayami, H.  472  CN038957223 
ISROMAC  1994  Particle Image Velocimetry around the Vortex Dimple at Free Surface  Okamoto, K.  473-483  CN038957235 
ISROMAC  1994  A Laser Speckle Photography Technique for Measuring Local and Global Heat Transfer Correlation Coefficients  Walsh, T. E.; Kihm, K. D.  484-494  CN038957247 
ISROMAC  1994  Digital Image Analysis for the Incoherent Medium Density PIV  Uemura, T.; Iguchi, M.; Morita, Z.-I.  495-503  CN038957259 
ISROMAC  1994  Comparison between Classical and Three Colours PIV in a Wake Flow  Cenedese, A.; Romano, G. P.  504-519  CN038957260 
ISROMAC  1996  Lateral Vibration Analysis of the Rotor System with Magnetic Forces  Dong-aui Han and Ho-Jee Moon  87   
ISROMAC  1994  Measurement of Near-Periodic Cylinder Wake by PIV  Murata, S.  423-440  CN038957193 
ISROMAC  1994  Vibrational Aspects of Coupled Axial Turbomachinery Blading  Mayer, J. F.  283-293  CN038957053 
ISROMAC  1988  A State-of-the-Art Survey in Rotordynamics-Nonlinear and Self-Excited Vibration Phenomena  F. F. Ehrich   
ISROMAC  1994  Interaction of Parametric and Forced Vibrations in High Speed Rotor-Bearing-Systems  Weyh, B.  173-188  CN038956980 
ISROMAC  1994  On the Precession Frequencies and Critical Speeds of a Spinning Beam  Zu, J. W.; Han, R. P. S.; Lu, J.  189-203  CN038956991 
ISROMAC  1994  Dynamic Analysis of Composite Rotors  Singh, S. P.; Gupta, K.  204-219  CN038957004 
ISROMAC  1994  Application of Multi-Mode Models in Rotor Dynamics  Muszynska, A.  220-233  CN038957016 
ISROMAC  1994  Application of Multi-Mode Models and the Root Locus Technique for Stability Analysis of Rotor Systems  Muszynska, A.; Hatch, C. T.; Bently, D. E.  234-246  CN038957028 
ISROMAC  1994  On Linear Model Representation of Rolling Bearings  Mehra, K.; Datta, J.; Farhang, K.  369  CN038957132 
ISROMAC  1994  Analytical and Experimental Analysis of a Self Compensating Dynamic Balancer in a Rotating Mechanism  Lee, J.; Van Moornem, W. K.; Kimbrough, S.  264-282  CN038957041 
ISROMAC  1994  Dynamical Behavior of a Cracked Rotating Shaft  Surella, M. M.; Krousgrill, C. M.  349-368  CN038957120 
ISROMAC  1994  In-Plane Structural Vibration in Ball Bearings  Mehra, K.; Datta, J.; Farhang, K.  294-315  CN038957065 
ISROMAC  1994  A Formulation for Predicting Structural Vibration of Ball Bearings in Three Dimensions  Mehra, K.; Farhang, K.  316  CN038957077 
ISROMAC  1994  Dynamical Behavior of Mechanical Non-Holonomic System for Speed Regulation  Zlokolica, M.; Cveticanin, L. J.  317-324  CN038957089 
ISROMAC  1994  The Effect of Ejector Capacity Upon Dynamic Stability of Steam Turbine Regulating System  Lin, G.; Lu, P.-Y.  325-337  CN038957090 
ISROMAC  1994  Acceleration Characteristics of a Flexible Rotor System Supported on Nonlinear Squeeze Film Damper  Changsheng, Z.  338-347  CN038957107 
ISROMAC  1994  Numerical Prediction of THREE-DIMENSIONAL Turbomachinery Flow Using a Time-Marching Algorithm  Wang, B. B.; Li, F.; Lee, W. C.  538-549  CN038957296 
ISROMAC  1994  The Dynamic Forces of Pump Annular Seals Induced by Two Phase Flow  Iwatsubo, T.; Nishio, T.  247-263  CN038957030 
ISROMAC  1996  Studies in Spontaneous Sidebanding in Rotordynamics  Fredric Ehrich  11   
ISROMAC  1994  Transient Temperature Distribution of Work Rolls Subject to Asymmetric Multiple Zone Cooling  Guo, R.-M.  779-798  CN038957478 
ISROMAC  1994  A Nonsimilar Boundary Layer on a Moving Wall  Gorla, R. S. R.  799-810  CN038957480 
ISROMAC  1994  Couette Flow Heat Loss Model for the Rotary Combustion Engine  Gorla, R.; Bartrand, T. A.  811-827  CN038957491 
ISROMAC  1994  Experimental Investigation of Steady and Unsteady Flow Field Downstream of an Automotive Torque Converter Turbine and Stator  Marathe, B. V.; Lakshiminarayana, B.  828-874  CN038957508 
ISROMAC  1994  A Study on Shifting Transient Characteristics of an Automotive Transmission with a Torque Converter  Lim, W. S.; Jho, H. S.; Park, Y. I.; Lee, J. M.  875-886  CN038957510 
ISROMAC  1994  Time-MeanVelocity Field Measurement using Visualized Flow Images  Okuno, T.; Nishio, S.; Kimoto, N.  520-526  CN038957272 
ISROMAC  1996  Dynamics of Anisotropically Supported Rotors  Agnes Muszynska, Charles T. Hatch and Donald E. Bently   
ISROMAC  1994  Water Sprinkler Spraying Water Rectangularly and Keeping the Track Snow Deposit Wet  Sawase, K.; Kurosaki, Y.; Sugaya, W.; Ueno, S.; Kawamura, H.  743-756  CN038957442 
ISROMAC  1996  Blade Deterioration in a Gas Turbine Engine  W. Tabakoff, A Hamed and V. Shanov  21   
ISROMAC  1996  Experimental Observations of Rotor Vibration in Subcritical/Supercritical Operation, Including Backward Whirl  Knox T. Millsaps and Frank A Simei, Jr.  31   
ISROMAC  1996  Applications of Complex Time Series for Rotor Dynamics Identification  Jong-po Park and Chong-Won Lee  38   
ISROMAC  1996  Experimental Identification of the Foundation Dynamic Stiffness Parameters of Rotor-Bearing-Foundation Systems  N.S. Feng and E.J. Hahn  48   
ISROMAC  1996  System Rotordynamics Model Based on a Hybrid Composition of the Global Deformation  Jorg Wauer  58   
ISROMAC  1996  Influence of Fluid Inertia Forces on the Response of Squeeze Film Damper Supported Rotors  Meng Guang, Guo Ying-O\ao and E.J. Hahn  727   
ISROMAC  1994  Surface Flows Inside Automotive Torque Converters  Lee, J.-S.; Ay, H.; Yang, W.-J.; Lee, G.  887-899  CN038957521 
ISROMAC  1994  The Effect of Noncondensable Gases in Condensation on Condensers  Zhang, C.  651-671  CN038957387 
ISROMAC  1994  Steady and Unsteady Navier-Stokes CFD Methods for the Design Application of Turbomachinery  Hah, C.  550-553  CN038957302 
ISROMAC  1994  Numerical Investigation of Unsteady Gust Effect on Turbomachinery Cascade Blade  Tang, W.  554  CN038957314 
ISROMAC  1994  Three-Dimensional Viscous Flows through an Axial Flow Fan  Kim, K.-Y.; Kim, S.-H.; Kim, T.-J.; Jang, C.-M.  555-565  CN038957326 
ISROMAC  1994  Navier-Stokes Computations for the Complex 3-D Flow Fields of Inducers and Centrifugal Impellers  Bache, G.  566-585  CN038957338 
ISROMAC  1994  A Thermal Design Approach for Natural Air Cooled Electronic Equipment Casings  Ishizuka, M.  586-599  CN038957340 
ISROMAC  1994  Vortex Behavior around Two Tandem Circular Cylinders at Various Spacings above a Flat Plate  Okui, K.; Yamane, R.; Takegoshi, E.; Iwabuchi, M.; Hirasawa, Y.  600-613  CN038957351 
ISROMAC  1994  High Speed Centrifugal Casting of Metal Matrix Composites  Berger, R.; Dharan, C. K.  759-778  CN038957466 
ISROMAC  1994  Application of Heat Transfer Technologies to Electronic Equipment  Yeh, L. T.  627-650  CN038957375 
ISROMAC  1994  Flow Characteristics of the Spin-Dryer  Cho, C. H.; Park, J. S.; Cho, K. Y.; Sohn, D. S.; Lim, K. S.; Chun, K. B.; Sung, H. J.  757-758  CN038957454 
ISROMAC  1994  Drag Reduction of Circular Cylinder with Surface-Grooves in the High Reynolds-Number Range  Adachi, T.; Ozaki, T.; Yamamoto, Y.; Matsuuchi, K.; Kawai, T.  672-688  CN038957399 
ISROMAC  1994  Experimental and Numerical Study of Transient Natural Convection in Inclined Enclosures  Gau, C.; Jeng, D. Z.  689-709  CN038957405 
ISROMAC  1994  Mixed Convection between Horizontal Parallel Plates  Mahgoub, M.; Wasel, M. G.; Ghith, M. S.  710-720  CN038957417 
ISROMAC  1994  A Numerical Study on Turbulent Couette Flow and Heat Transfer in Concentric Annuli by Means of a Reynolds Stress Turbulence Model  Torii, S.; Yang, W.-J.  721-734  CN038957429 
ISROMAC  1994  Development and Experiments of a System Using Sprinklers for Melting the Snow on Guideway on Which Magnetically Levitated Train Runs  Yamazaki, M.; Hamajima, M.; Nishimura, K.; Sawase, K.; Ueno, S.; Kawamura, H.  735-742  CN038957430 
ISROMAC  1996  A Dynamic Analysis of a Flexible Rotor in Ball Bearings with Nonlinear Stiffness Characteristics  Dong-Soo Lee and Dong-Hoon Choi  78   
ISROMAC  1994  A New Theory and Experiments on Absorption of Refrigerant Vapors into Falling Liquid Films  Guo, K.-H.; Chen, L.-P.; Shu, B.-F.  614-626  CN038957363 
ISROMAC  1998  Dry Chlorine Centrifugal Compressor on Active Magnetic Bearings  A. Argondizza, S. Carabelli, C. Delprete, and G, Genta  68   
ISROMAC  1996  Life Prediction of the Machining Center Main Spindle Bearing with Preload Effect  Pyung Hwang, Sung-In Kwon and Seung-Han Yang  710   
ISROMAC  1998  Blade and Rotor Bearing Failures - The Role of State of Art Multifaceted Technologies in Investigations of a Nuclear Power Plant Accident  J. S. Rao   
ISROMAC  1998  Active Removal of Hydrodynamic Instabilities in Partially Filled Centrifuges  H Ulbrich, G. Ahaus, A. Cyllik, and C. Zhu  20   
ISROMAC  1998  Dynamic Behavior of a Rigid Shaft Mounted in an Active Bearing  0. Bonneau, E. Lecoutre, and J. Frene  30   
ISROMAC  1998  Vibration Criteria Considered From Case Studies of Active Magnetic Bearing Equipped Rotating Machines  0. Matsushita, Y. Kanemitsu, T. Azuma, and Y. Fukushima  38   
ISROMAC  1996  State of Resin Heated in Barrel of Injection Molding Machine and Its Moldings Quality  Nobuhiko Nishiwaki, Masaaki Konno, Ailing Cui, Sankei Hori and Sadanari Mochizuki  735   
ISROMAC  1998  FEM Based Controller Design for Active Magnetic Bearings in Hard Disk Drives  A. Argondizza, B. Aeschlimann, H Bleuler, S. Carabelli, G. Genta, M Kuemmerle, R. Mueller, and A. Tonoli   58   
ISROMAC  1996  On the Characteristics of the Thermal Behavior of a High Speed Machine Tool Spindle  T ae- Jo Ko, Pyung Hwang, Hee-Sool Kim and Sun-Ho Kim  726   
ISROMAC  1998  Motion Analysis During Rotor Drop in Active Magnetic Bearing Machinery  F. Vatta and A. Vigliani  78   
ISROMAC  1998  Critical Speed Analysis of Fiber Reinforced Composite Rotor Embedded With Shape Memory Alloy Wires  K. Gupta  86   
ISROMAC  1998  Stresses in Composite Shafts Subjected to Unbalance Excitation and Transmitted Torque  H B. H Gubran, S. P. Singh, and K. Gupta  96   
ISROMAC  1998  Dynamic and Thermal Characteristics of Rotors Made of Carbon Fiber Epoxy Composite Materials  J. K. Choi, D. G. Lee, and K. HAhn  106   
ISROMAC  1998  Semi-Active Stability Control of Shape Memory Alloy Hybrid Composite Shaft  A. Tylikowski  116   
ISROMAC  1998  Use of Directional Wigner Distribution for Identification of the Instantaneous Whirling Orbit in Rotating Machinery  C. W Lee and Y. S. Han  126   
ISROMAC  1998  Numerical Simulation of the Dynamic Behaviour of Rotors on Active Magnetic Bearings  C. Delprete, G. Genta, and A. Repaci  48   
ISROMAC  1996  The Flow Characteristic and the Mechanism of Circular Cylinder with Grooves  Kouichi Ishibashi and Katsumi Aoki  661   
ISROMAC  1996  Blade Row Interaction Tone Generation and Active Control  Sanford Fleeter  600   
ISROMAC  1996  Numerical Study of the Dynamic Characteristics of Steam Turbine Speed Governing System  Yi-Ping Dai and Mao-Zheng Yu  609   
ISROMAC  1996  Numerical Heat Transfer in a Gradually Expanding Nozzle with Radiation Effect  Seung-Wook Baek and Man-Young Kim  617   
ISROMAC  1996  The Effects of a T-Type Baffle- Nozzle in a Developing Free Jet  Young Sang Kim, jae Wook Rvu, Young Ho Shin, Ho Dong Park and Tae Won Sea  625   
ISROMAC  1996  Flow Pattern and Characteristics on Main Nozzle of Air Jet Loom  Deddy Setya Yudha, T akao Sasayama, Katsumi Aoki and Masamori lida  635   
ISROMAC  1996  Transient Heat Transfer Analysis in Vacuum Furnace by Radiant Tube Burners  A Mochida, K. Kudo, Y. Mizutani, M. Hattori and Y. Nakamura  742   
ISROMAC  1996  Visualization of Flow Patterns in a 9O-Degree Sharp Turn of a Square Duct  K.c. Cheng and l. Shi  651   
ISROMAC  1998  Complex Harmonics - a New Concept for Vibration Signature Analysis and Fault Diagnosis of Rotors  J. Chen and P. Yan  155   
ISROMAC  1996  An Aerodynamic Method for the Analysis of Wind Farms of Dense Cluster Arrangements  Christian Masson, Idriss Ammara and Ion Paraschivoiu  670   
ISROMAC  1996  Flow Characteristics of Non-Newtonian Fluids in the Stenotic and Bifurcated Tubes  Sang-Sin Yoo and Sang-Ho Suh  680   
ISROMAC  1996  Variational Finite Element Method for the Design of 2-D and Axisymmetric Wind Tunnel Contractions  He Hong and Gao-lian liu  690   
ISROMAC  1996  Flow Resistance Coefficient Values for Perlorated Plates in Low Reynolds Number Ranges  Masaru Ishizuka  696   
ISROMAC  1996  Numerical Analysis of Heat Transport in Thermal Entrance Region of Turbulent Parallel Couette Flows in Concentric Annuli  Shuichi Torii and Wen-lei Yang  706   
ISROMAC  1996  Thermal Analysis of Compact Electronic Equipment  Katsumi Hisano, Hideo Iwasaki and Masaru Ishizuka  716   
ISROMAC  1996  Spray Characteristics of a Pilot Nozzle in a Counter-Swirl Type Gas Turbine Combustor  Young-Sung Ko, Suk Ho Omng, Myoung-Hwan Kim, Dong-jin Kim and Dae-Ki Min  644   
ISROMAC  1998  Vibrational Diagnostic of Rotating Machinery in Power Plants  U Sudmersen, D. Stegemann, W Reimche, and Y. Liu  383   
ISROMAC  1998  Optimal Geometry for Journal Bearings  K. Matsuda, Y. Kanemitsu, and S. Kijimoto  317   
ISROMAC  1998  Wave Bearing Technology to Control Journal Bearing Dynamics,  F Dimofte and T. G. Keith  327   
ISROMAC  1998  Dynamic Characteristics of the 3-Lobe Journal Bearing With the Different Length of Lobes  S. Strzelecki  337   
ISROMAC  1998  Effect of Misalignment on the Spring and Damping Coefficients of the 2-Lobe Journal Bearing  S. Strzelecki and W Litwicki  346   
ISROMAC  1998  Monitoring and Mechanical Fault Diagnosis on Large Turbomachinery in Power Industry - Field Case Histories  P. Tirinda  354   
ISROMAC  1998  Vibration Monitoring of Non-Stationary Rotor Systems  J. Strackeljan and D. Behr  135   
ISROMAC  1998  Mechanical Behavior of an Industrial Gas Turbine Under Fault Conditions, a Case History  S. S. Florjancic, N Lively, and R. Thomas  373   
ISROMAC  1998  Experimental Modal Analysis - A Tool for Unbalance Identification of Rotating Machines,  H Irretier and T. Kreuzinger-Janik  286   
ISROMAC  1998  Diagnosis and Solution of the Exciter Rotor Vibration Problem  Z. Racic, B. Sun and N Boyle  394   
ISROMAC  1998  Development of Condition Assessment Methodology for High Pressure Boiler Feed Pumps  K. Ramakrishna and T. Chander  399   
ISROMAC  1998  Strength Analysis and Accidents of Shaft Destruction Under Nonlinear Vibration With Large Unbalance of Turbogenerator Rotor Systems  S. Lu  407   
ISROMAC  1998  Numerical and Experimental Study on Impeller Failure  S. P. Lee, C. O. Ahn, H S. Rew, S, C. Park, and D. I Rhee  415   
ISROMAC  1998  Miniature Instrumentation for Troubleshooting in Rotating Machinery Applications  J Rosinski and D. A. Hofmann  423   
ISROMAC  1998  Diagnostics and Catastrophic Fracture Protection of Rotating Machinery  R.S. Trofimov and N A. Makhutov  432   
ISROMAC  1998  An Introduction to the Condition Monitoring, Analysis and Diagnosis System of a 300MW Pumped Storage Power Unit  C. S. Chang, W Zhang, X Y. Yang, and F L. Chu  363   
ISROMAC  1998  Use of Non-Linear Effects in Vibroacoustic Diagnosis  Z. Dabrowski and J. Gardulski  230   
ISROMAC  1996  Effect of Periodic Passing Wake on the Film Coolant Flow over a Flat Plate  Keon Kuk, Joon Sik Lee, Sung Tack Ro and Woo II Lee  573   
ISROMAC  1998  Rotation-Synchronous Detection and Characterization of Mechanical Sources of Current Distortion in Electric AC Machines Using Wavelet Transform  A. M Trzynadlowski, R. L. Kirlin, and R.M Dizaji  163   
ISROMAC  1998  Comparison Between Probability and Wavelet Analysis in Bearing Failure Detection  H R. Martin and S. Ziaei  170   
ISROMAC  1998  Diagnosis of State Cycles for Power Plants With the Program MultiFUN Applied to a Typical Operational Coal Power Plant  F W Fuchs and H Stetter  180   
ISROMAC  1998  Experience in Neural Network Application to Thermal Diagnostics in Power Engineering  J. Krzyzanowski and J. Ghuch  192   
ISROMAC  1998  Dynamic Stability of Rotor-Bearing Systems With Internal Damping  L. Forrai  202   
ISROMAC  1998  Destabilizing Effect of Aerodynamic Forces in Centrifugal Compressors,  D. E. Bently and P. Goldman  306   
ISROMAC  1998  Effectiveness of Monitoring of the Thermodynamic Cycle of a Gas Turbine Engine in Ship's Energy Systems  A. Adamkiewicz  220   
ISROMAC  1998  Numerical and Experimental Investigations of Coupling Effects in Anisotropic Elastic Rotors  H Irretier, F Reuter, and G. Jacquet-Richardet  296   
ISROMAC  1998  Vibration Control of a Pressurized, Sealed, Electro-Rheological Fluid Squeeze-Film Damper Supported Rotor  C. H Kim, N S. Lee, Y. B. Lee, and D. H Choi  238   
ISROMAC  1998  Stability Analysis of a Gear Pair System Supported by Squeeze-Film Dampers  T. N Shiau, J. R. Chang, and S. T. Choi  248   
ISROMAC  1998  Time Domain Study of the Dynamic Stressing of Crankshafts  G. Genta and S. Zanolli  258   
ISROMAC  1998  Transformation of Gear Inter Teeth Forces Into Acceleration and Velocity  W Bartelmus  268   
ISROMAC  1998  Identification of Stiffness Reduction in the System of Steam Turbine Generator Sets by Application of Modal Test Under Conditions in Situations  S. Gajin, S. B. Kuzmanovic, and J Maricic  278   
ISROMAC  1998  Condition Monitoring and Fault Diagnosis of Rotating Machinery Based on Neural Networks  L. Rajamani and R. Dattagupta  145   
ISROMAC  1998  Simulation Methods in Acquisition of Diagnostic Relations  J. Kicinski, R. Drozdowski, and P. Materny  210   
ISROMAC  1996  Effects of Operating Conditions on the Flow in the Moving Blade Passage of a Single Stage Axial-Flow Fan  Tsutomu Adachi, Minoru Yamashita, Kennicl1iro Yasuhara and Tastsuo Kawai  199   
ISROMAC  1996  Low Reynolds Number Turbine Blade Cascade Calculations  Richard Rivir, Rolf Sondergaard, Michael Dahlstrom and Elizabeth Ervin  132   
ISROMAC  1996  Leakage & Diffuser Flow Investigation of the Flow in Pelton Turbines and the Influence of the Casing  Heinz-Bernd Matthias, Josef Prost and Christian Rossegger  142   
ISROMAC  1996  Measurement of the Flow in the Backshroud/Casing Clearance of a Precessing Centrifugal Impeller  Yoshiki Yoshida, Akira Saito, Shin Ishizaki, Yoshinobu Tsujimolo and Hideo Ohashi  151   
ISROMAC  1996  Computational Analysis of Transonic Flows in Centrifugal Compressor Diffusers Using Upwind Navier-Stokes Method  Dong Joo Song, Gee Bum Kwon and Shin Hyoung Kang  161   
ISROMAC  1996  Flow Calculation of a Steam Turbine Last Stage with Diffuser  J. Kruckels, R. Merz, JF. Mayer and H. Stetter  170   
ISROMAC  1996  Numerical Analysis of Viscous Flow through Single Stage Turbine  E.YK Ng and Miao Yi  268   
ISROMAC  1996  Computational and Experimental Investigations on the Flow through an Axial Flow Fan  Kwang-Yong Kim, Xi Chen, Jung-Yup Kim, Duck-Soo OIung and Seong-lim Hong  190   
ISROMAC  1996  Performance Predictions of VA WTS with NLF Airfoil Blades  OIristian Masson, OIristophe Leclerc and Ion Paraschivoiu  113   
ISROMAC  1996  LDA Measurement and Calculation in a Small Axial Fan  H.S. Rew, SH Kim, Y.G. lung, c.J. Kim and J.E. OIa  209   
ISROMAC  1996  An Experimental Study on the Noise Reduction of Regenerative Pump  Sung-Bin lee, Sung-Bae Song, Sung-il Park and Dong-Ick _  219   
ISROMAC  1996  Three-Dimensional Flow Patterns in a Pump Volute at Nominal and Off-Design Flow Conditions by LDA Measurements  Gabriel Dan Ciocan, Andre luiz Amarante Iv'tesquita and Jean louis Kueny  229   
ISROMAC  1996  CFD : Rotor-Stator Interaction & Multistage Flow Analysis of Unsteady Transonic Stator/Rotor Interaction Using Patched and Chimera Grid System  Sun- T ae Kim and Dong-Ho lee  238   
ISROMAC  1996  Rotor-Stator Interaction in Hydraulic Machinery  N. Riedel, T.Aschenbrenner and R Schilling  248   
ISROMAC  1996  Hydraulic Machines Process Control and Simulation  MA Rayan, N.H. Mostafa and R.N. Azoole  590   
ISROMAC  1996  Flow Characteristics in a Diffuser with Various Profiles of Inlet Velocity  Yang-Duck Lee and Jae-Heon Lee  180   
ISROMAC  1996  Onset of Cavitation in Oil Flow through a Rotating Shaft with Twin Branches  Sun-Wen Cheng and Wen-lei Yang  57   
ISROMAC  1996  An Experimental Study on the Stiffness and Damping Coefficients of an Air Bearing Using Magnetic Exciter  Jun-Ho Choi, Sang-Shin Park and Dong-Chul Han  736   
ISROMAC  1996  The Limit Cycle Characteristics Analysis of Oil Film Instability Whirl with Hopf Bifurcation Method  Cheng-Song Chang and Hua-Ping Mu  745   
ISROMAC  1996  Measurement of Radial Error Motions in a Precision Air Spindle  Sang-Shin Park, II-Hae Kim and Dong-Glul Han.  753   
ISROMAC  1996  Effects of System Rotation on Turbulence Structure -A Review Relevant to Turbomachinery Flows -  James P. Johnston   
ISROMAC  1996  Performance of an Axial-Flow Pump Stage with Outlet Guide Vanes of Variable Geometry  G. Ebinger and HE Siekmann  18   
ISROMAC  1996  Experimental Investigation of Rotor-Stator-Interaction in Axial-Flow Turbines and Compressors  Heinz E. Gallus  28   
ISROMAC  1996  Laser Velocimetry Measurements in a Double Volute Centrifugal Pump  William deOjeda, Ronald D. Flack and Steven M. Miner  131   
ISROMAC  1996  Measurement and Prediction of Square Sectioned Rotating 00° Curved Duct Flow by Coriolis- Modified Low Reynolds Number Second Moment Closure  Young Don Choi, Gun Hyee Lee and Jong Kun Shin  47   
ISROMAC  1996  Distorted Inlet Flow Propagation in Axial Compressors  JH Kim, F.E. Marble and c.-J. Kim  123   
ISROMAC  1996  Vortex Breakdown in a Differentially Rotating Cylindrical Container  Kazuyuki Fujimura, Hide S. Koyama, Jae Min Hyun  67   
ISROMAC  1996  Axisymmetric Vortex Breakdown in a Container With a Rotating Cone  Jae Won Kim, Jae Min Hyun  77   
ISROMAC  1996  Swirling Flow Field inside a Hollow Turbine Shaft for an Internal Cooling Air System  Tadaharu Kishibe, Shojiro Kaji  85   
ISROMAC  1996  Axial Compressor Stall and Surge Prediction by Measurements  H. Honen  95   
ISROMAC  1996  Multiply Connected Cavity Flows in Turbomachines  Rc. Hendricks, MM. Athavale, YH 1-10, JM. Forry, BM. Steinetz, K.R. Csavina  104   
ISROMAC  1996  The Flow Analysis of a Three-Dimensional Multistage Turbomachinery Blade Design  Shih H. Chen  277   
ISROMAC  1996  Navier-Stokes Computations of Non-Isothermal Flow and Heat Transfer between Counter-Rotating Disks  C.Y. Soong and Ch Chyuan  39   
ISROMAC  1996  Turbulent Heat Transfer and Friction in a Passage Disturbed by Detached Permeable Ribs of Different Heights  Tong-Miin Liou, Yuan-Jen Chang and Shih-Hui Chen  519   
ISROMAC  1996  Local Heat Transfer in Rotating Cavities with Radial Outflow of Cooling Air  H. Saitoh, S. Mochizuki, A Murata, H. Saito, A T ateno  450   
ISROMAC  1996  Numerical Study for Optimizing Heat Transfer in a High Speed Rotating Components  S. Wittig, S. Kim, T. Scherer and I. Weissert  460   
ISROMAC  1996  Heat Transfer in an Electromagnetic Bearing  GF. Jones and C. Nataraj  470   
ISROMAC  1996  Two-Phase Air/Oil F1ow in Aero Engine Bearing Chambers-Assessment of an Analytical Prediction Method for the Internal Wall Heat Transfer  A Glahn and S. Wittig  481   
ISROMAC  1996  An Analysis of the External Cooling of an Electro-Rheological Cylindrical Clutch  Raymond Smyth  491   
ISROMAC  1996  Unsteady Incompressible Turbulent Flow Simulation of the Rotor-Stator Configuration  W.G. Park, H.W. Kim, Y.R. Jung, K.S. Kim and ED. Park  257   
ISROMAC  1996  Effect of a Single Oblique Pin Fin on Endwall Heat Transfer  Ryosuke Matsumoto, Shinzo Kikkawa, Mamoru Senda and Masayuki Suzuki  509   
ISROMAC  1996  Experimental Study on Convective Heat Transfer of Inward Air Flow in Rotating Multi-Channels  G]. Hwang, C.R. Kuo and C.Y. Chang  422   
ISROMAC  1996  Experiments of the Interaction between Water Sprays and Fire Plumes  Myung Boo Kim, Yong Jae Jang and Jin Kook Kim  529   
ISROMAC  1996  Performance Investigation into Leaned and Twisted Blades  Dongmei Zhou, Zhigang Zhang, Xiaoshen Ye and Zeying Peng  537   
ISROMAC  1996  Numerical Study of Jet Impingement for Turbine Blade Cooling  Shin-II Kim, Young-Ki Choi, Hong-Sun Ryou and Jung-Hee Lee  543   
ISROMAC  1996  Local Heat Transfer. Coefficient Distributions under an Array of Impinging Jets Using a Transient Liquid Crystal Technique  Yizhe Huang, Srinath V. Ekkad and Je-Chin Han  553   
ISROMAC  1996  Analysis of the Gas Turbine Cooled Moving Blade  G. Urquiza B., JoA Kubiak, A Camero P., JoA Lopez R. and A. Garcia A.  563   
ISROMAC  1994  Dynamics of a Planetary Gear-Rotor-Bearing System Modeled With Finite Elements  Chen, C. S.; Natsiavas, S.; Nelson, H. D.  135-145  CN038956954 
ISROMAC  1996  Experimental Study of Heat Transfer on Rotating Roll Cooled by Water Nozzles  Miroslav Raudensky, Jaroslav Horsky, Jiri Krejsa and Ampere A. Tseng  501   
ISROMAC  1996  An Analysis of 2-D Transonic Cascade Flow Using the k-(J Turbulence Model with Explicit-Implicit Solver  Chang Ho alOi and Jung Yul Yoo  365   
ISROMAC  1996  Multistage Analysis of the Titan IV Stage I Engine Turbine Flow Path Using 3-D Navier-Stokes Computational Fluid Dynamics  RJ. Blumenthal and P.F. Galpin  287   
ISROMAC  1996  Simulation of Three-Dimensional Viscous Flow in a Three-Stage Steam Turbine with Tip Leakage  ROdiger Merz, JOrg KrOckels, JOrgen F. Mayer and Heinz Stetter  297   
ISROMAC  1996  Calculation of Secondary Flow in a Centrifugal Pump Using 3D Viscous Flow Computation Techniques  K. Majidi and HE Siekmann  306   
ISROMAC  1996  Incompressible Three-Dimensional Euler Computation of the Flow Inside a Spatial Centrifugal Pump with Splitters Including Loss Effects  EM. El Chazzani, AR. Ridwan, G. Bois, Ph. Geai and JM. Sannino  317   
ISROMAC  1996  Application of Through-Flow Calculation to Design and Performance Prediction of Centrifugal Compressor  Shin-Hyoung Kang and Young-Seck Choi  326   
ISROMAC  1996  3-D Viscous Flow Analysis of an Axial Flow Pump Impeller  Steven M. Miner  336   
ISROMAC  1996  Freezing in Turbulent Flow inside an Axially Rotating Pipe at Low Flow-Rate Reynolds Numbers  K. - J. Rinck and H. Beer  440   
ISROMAC  1996  Evaluation of Acoustic Flutter Suppression in Transonic Cascade Flows  Pong-leu Lu, Sen-Kuei Chen and Ron-Ho Ni  355   
ISROMAC  1996  Unsteady Convection in a Rotating Concentric Drum with Inner Surface Heating  Hiroshi Ohue, Wen-lei Yang and Genshi Kawashima  431   
ISROMAC  1996  Numerical Simulation of the Three-Dimensional Turbulent Flow in a Turbine Rotor with Conical Walls  Volker Amedick and Heribert Simon  375   
ISROMAC  1996  An Improved Flux Vector Splitting Implicit Method for Solving the Inviscid and Viscous Internal Flows  E.Y.K. Ng and S.l. Liu  385   
ISROMAC  1996  Interactive Grid Generation System for Turbomachinery Cascade Design Procedure  Hee- T aeg Chung  396   
ISROMAC  1996  Numerical Analysis of Transonic Turbine Cascade and Off-Design Characteristics  Yi Liu and Bin Liu  406   
ISROMAC  1996  Flow Regimes in Film Condensation in a Horizontal, Slowly Rotating Cylinder  Koichi Mizukami, Noriyuki Sebe, Fumiaki Abe, Shi-Wen Peng and Miao-Kun Zhong  414   
ISROMAC  1996  Development of a Telemetry System to Measure Convective Heat Transfer Coefficient of a Rotating Body  Kyoung-Pyo Ha. Myoung Keun Yoon and S. Ken Kauh  580   
ISROMAC  1996  Numerical Flow Analysis in a Centrifugal Pump for Optimization of the Casing with Regard to Hydraulic Efficiency and Bearing Forces  A Kaps and HE. Siekmann  345   
ISROMAC  1992  Local Heat Transfer in a Rotating Square Channel with Smooth Walls and Radial Outward Flow  Zhang, Y.; Han, J. C.  624-633  CN003682778 
ISROMAC  1992  Natural Vibrations of Cracked Turbine Blades  Ostachowicz, W. M.; Krawezuk, M.  1044-1051  CN003683175 
ISROMAC  1990  Application of SVD Algorithm to Influence Coefficient Balancing Computation of Flexible Rotors  J. M. Yang  719   
ISROMAC  1990  On the Asymmetric Vibration of Point-Supported Circular Plates  S. Azimi  729   
ISROMAC  1992  Reliability Evaluation of Main Feed Water Pump for PWR Plant - Reliability Under Cavitating Conditions  Manabe, N.; Yae, S.; Kawakami, T.; Fujii, Y.  581-590  CN003682730 
ISROMAC  1992  A Numerical Procedure for Coupled CFD/Thermal Conduction Analysis of Turbine Disks and Disk Cavities  Bache, G.; Blumenthal, R.; Swaim, R.  591-600  CN003682742 
ISROMAC  1990  The Use of Beam-Like Model Data for Stiffness Profile Estimation by the EBS Method: Part 2 - Completion and Benchmarking  T. A. Vest and M. S. Darlow  693   
ISROMAC  1992  Computation of Incompressible Viscous Flows Through Turbopump Components  Kwak, D.; Kiris, C.; Rogers, S.  611-623  CN003682766 
ISROMAC  1990  Equations of Motion of a Flexible Rotor with Axially Loose Disc  M. Riemer  675   
ISROMAC  1992  Approximate Solution Method of Rotating Coaxial Disk Flows with Free Surface under Reduced Gravity  Wu, J.; Delgado, A.; Rath, H. J.  634-643  CN003682780 
ISROMAC  1992  Interactions between Different Strength Vortices and Injectant Downstream of Film-Cooling Holes in a Turbulent Boundary Layer  Ligrani, P. M.  644-653  CN003682791 
ISROMAC  1992  Experimental Study by LDV and Flow Visualization on Flow Pattern of Unsteady Flow in Rotating Drums  Kawashima, G.; Ohue, H.; Yang, W.-J.  654-662  CN003682808 
ISROMAC  1992  Wave Propagation in Rotating Cylinders  Seemann, W.  663-672  CN003682810 
ISROMAC  1992  Transient Interface Shape in Spin-Up from Rest of a Two-Layer Liquid in a Cylinder  Choi, S.; Lim, T. G.; Hyun, J. M.  673-685  CN003682821 
ISROMAC  1992  Turbulent Characteristics of the Flow in an Axially Rotating Pipe  Imao, S.; Itoh, M.; Harada, T.  686-695  CN003682833 
ISROMAC  1992  Holographic Interferometry Measurement of Turbulent Heat Transfer in a Channel with Semicircular Ribs on Two Opposite Walls  Liou, T.-M.; Hwang, G.-J.  601-610  CN003682754 
ISROMAC  1990  Optimal Location of Forces Controlling Vibration of Flexible Rotors  Z. Gosiewski and T. Bil  571   
ISROMAC  1990  Stochastic Aerodynamic Model for Studying Darrieus Rotor in Turbulent Wind  M. T. Brahimi and I. Paraschivoiu  463   
ISROMAC  1990  Analytical and Experimental Study of the Hydrodynamic Unbalance of Single-Vane Impellers  H. E. Siekmann and M. Stark  479   
ISROMAC  1990  Off-Design Behavior of Two Pump-Turbine Model Impellers with Similar Geometry but Different Blade Curvature  H. Stepanik and H. Brekke  497   
ISROMAC  1990  An Experimental Study of Fluid Forces on a Centrifugal Impeller Rotating and Whirling in a Volute Casing  Y. Yoshida and Y. Tsujimoto  513   
ISROMAC  1990  Periodic Radial Forces Acting on Screw Centrifugal Pump  K. Tanaka, M. Arai, and S. Ikeo  527   
ISROMAC  1990  Simulation Research on the Dynamic Characteristics of a Steam-Injected Gas Turbine  K.-J. Mao and X-w. Oai  705   
ISROMAC  1990  A Magnetic Bearing Control Scheme for Cancelling Submerged Rotor Vibratory Forces  H. M. Chen and P. Lewis  559   
ISROMAC  1992  Development of a Shape-Controlled Airfoil by Use of SMA  Tsukamoto, H.; Tanaka, K.; Matsunaga, S.; Tanaka, H.  723-731  CN003682869 
ISROMAC  1990  An Adaptive Control Method of Flexible Rotor Vibration  Z. Gosiewski and D. Janecki  587   
ISROMAC  1990  The Use of Piezoelectric Actuators for Active Vibration Suppression in Rotating Machinery  A. F. Kascak, A. B. Palazzolo, R. R. Un, and G. Montague  605   
ISROMAC  1990  Development of Sealing Line Calculation in Twin Screw Compressor  L. Zhang and J. F. Hamilton  623   
ISROMAC  1990  Computer System for Multi-Bearing Rotor Design  Z. A. Parszewski and K. Krynicki  639   
ISROMAC  1990  Electrostatic Charge Build-up in Lubricating Channels of Turbomachinery  J. Seyed- Yagoobi, R. D. Gross, and A. B. Palazzolo  653   
ISROMAC  1990  Free Vibration Analysis of a Rotating Workpiece During Machining  R. P. S. Han and J. W. Z. Zu  661   
ISROMAC  1990  Active Chamber System for Vibration Control of Rotating Machinery  J. Althaus and H. Ulbrich  543   
ISROMAC  1992  CFD Aided Design of Centrifugal Pump Impellers  Schilling, R.; Watzelt, C.; Haas, H.; Bindewalt, C.  985-993  CN003683102 
ISROMAC  1992  Unsteady Aerodynamic Analysis on Subsonic Oscillating Cascades  Chen, S. H.; Eastland, A. H.; Jackson, E. D.  912-927  CN003683035 
ISROMAC  1992  On the Active Optimal Vibration Control of Rotor Systems  Fan, G. W.; Nelson, H. D.; Castelazo, L. A.; Zhu, W.  928-937  CN003683047 
ISROMAC  1992  Virtual Instability in Rotor-Bearing System; Part I - Measurement  Lin, Y. Q.; Vance, J. M.  938-946  CN003683059 
ISROMAC  1992  A study on Vibration Characteristics of a High Head Pump Turbine Runner  Iwasaki, Y.; Sakamoto, A.; Kanki, H.; Baba, K.  947-956  CN003683060 
ISROMAC  1992  An Experimental Investigation of Fluid Exciting Force on a High Head Pump-Turbine Runner  Miyagawa, K.; Mutaguchi, K.; Kanki, H.; Iwasaki, Y.  957-966  CN003683072 
ISROMAC  1992  Study on the Unsteady Flow in Turbomachinery  Adachi, T.; Murakami, Y.  696-710  CN003682845 
ISROMAC  1992  Dynamic Fly Height Characteristics of a Computer Disk Head Slider (I)  Yen, J.-Y.; Chen, S.-L.; Liang, H.-S.  975-984  CN003683096 
ISROMAC  1992  The Shapes of Inertial and Aerodynamic Troposkiens  Ashley, H.; Digumarthi, R. V.  872-888  CN003683000 
ISROMAC  1992  Modern Maintenance of Rotating Machines in Mutullurgical Plants  Shen, D.; Feng, Z. M.  994-1000  CN003683114 
ISROMAC  1992  Fuzzy Input-Neutral Net Adoptive Expert Systems for Diagnosis of Turbo-Machinery Incipient Failures  Dimarogonas, A. D.  1001-1008  CN003683126 
ISROMAC  1992  Bilinear Analysis for Closing Cracks in Rotating Shafts  Dimarogonas, A. D.  1009-1014  CN003683138 
ISROMAC  1992  Vibrations of a Rotating Shaft Containing a Transverse Crack (Vibrations at the Secondary Critical Speed)  Ishida, Y.; Yamamoto, T.  1015-1024  CN003683140 
ISROMAC  1992  New Approach for the Modeling and Simulation of Simple Cracked Rotor  Jun, O. S.; Lee, C. W.; Earmme, Y. Y.; Eun, H. J.  1025-1034  CN003683151 
ISROMAC  1994  Dynamics of the Rotating Rigid Body with High-Frequency Vibrating Foundation  Dobrinskaya, T. A.  165-172  CN038956978 
ISROMAC  1992  Vibrations of a Rotating Flexible Shaft in a Cylindrically Bounded, Viscous, Compressible Fluid  Wauer, J.  967-974  CN003683084 
ISROMAC  1992  An Experimental Evaluation of the Design and Performance of Screw-Type Water Turbine  Usui, K.; Ohmori, J.; Ushiyama, I.  815-824  CN003682948 
ISROMAC  1990  Nonlinear Interactions Between Resonance and Instability in a Symmetric Rotor  S. W. Shaw and J. Shaw  419   
ISROMAC  1992  Experimental and Theoretical Investigations on the Effect of the Stagger Angle on the Secondary Flow in Plane Compressor Cascades  Stark, U.; Bross, S.  732-746  CN003682870 
ISROMAC  1992  Inviscid Flow Solutions of a Transonic Turbine Cascade Using Conservative Zonal Boundaries in a Nonperiodic H-Type Grid  Yeuan, J. J.; Tabakoff, W.; Hamed, A.  747-756  CN003682882 
ISROMAC  1992  Numerical Simulation of Plane Cascade Viscous Flow  Ju, H. B.; Liu, B.; Xiang, Y. M.  757-766  CN003682894 
ISROMAC  1992  Historical Development of Fluid Mechanics - Review, Observations, Scope, Chronology, and Bibliography  Cheng, K. C.  767-785  CN003682900 
ISROMAC  1992  Studies on Ocean Wave Power Generation Plant with Pressure and Flow Direction Control by One Valve  Tan, S.; Fukushi, M.; Shimizu, Y.  786-794  CN003682912 
ISROMAC  1992  Self-Induced and Forced Vibrations of Centrifugal Impeller Operating at Supercritical Speed  Yoshida, Y.; Tsujimoto, Y.; Murakami, Y.; Ito, T.  899-911  CN003683023 
ISROMAC  1992  Model and Prototype Performance of Waterjet Propulsion Systems for Small-Scale High-Speed Hydroplane Boat  Fujisawa, N.; Ogawa, Y.  805-814  CN003682936 
ISROMAC  1992  Calculations of Dynamic Force of Annular Smooth Seal with Eccentricity  Iwatsubo, T.; Ono, M.; Tsujimoto, Y.  889-898  CN003683011 
ISROMAC  1992  Research and Developments of Straight Wing Non-articulated Vertical Axis Wind Turbine  Seki, K.; Matsumoto, T.; Zhang, Y.; Suganami, Z.  825-833  CN003682950 
ISROMAC  1992  Studies on Computer Control of Horizontal Axis Wind Turbine and New Inverter Generation System  Shimizu, Y.; Mizuno, E.; Morisawa, S.  834-843  CN003682961 
ISROMAC  1992  Experimental Studies on the Thrust for the Vertical-Axis Wind Turbines  Ushiyama, I.; Mashige, M.; Kakita, Y.  844-852  CN003682973 
ISROMAC  1992  Large Scale WTGS and Wind Cluster Development Model  Matsumiya, H.; Kawamura, S.; Ogawa, T.; Kumeoka, Y.  853-862  CN003682985 
ISROMAC  1992  Performance of a Propeller Type Small Wind Turbine with a Side Vane (Response to the Changes in Wind Speed and Direction)  Sawada, T.  863-871  CN003682997 
ISROMAC  1992  Numerical Calculations of the Turbulent Flow through a Controlled Diffusion Compressor Blade in Cascade  Kang, S. H.; Kim, K. Y.; Lee, J. S.; Kim, Y. H.  711-722  CN003682857 
ISROMAC  1992  Performance of Wells Type Turbines for Wave Energy Conversion  Inoue, M.; Setoguchi, T.; Hamakawa, M.; Kaneko, K.  795-804  CN003682924 
ISROMAC  1988  An Active Magnetic Damper for Rotor Vibration Control  H. M. Chen  381   
ISROMAC  1988  An Analysis of the Stability of Rotor System Supported by the Tilting Pad Bearing under Aerodynamic Excitation  F. -S. Wang, C. -So Chang, and H. -S. Gong  287   
ISROMAC  1988  Rapid Stability Analysis of Parameter-Excited Large Systems  B. Weyh  303   
ISROMAC  1988  Aerodynamic Instability Mechanisms for Centrifugal Compressors  R. G. Kirk  315   
ISROMAC  1988  Instability of Semi-Flexible Rotor with Four-Wedge Bearings  R.-M. Zhou  327   
ISROMAC  1988  Enhanced Rotor Modeling Tailored for Dynamic Stability Analysis and Nonlinear Simulation  R. R. Davis  339   
ISROMAC  1988  About Dynamics of a Planetary Variator as a Nonholonomic System  M. Z. Zlokolica and L. Cveticanin  481   
ISROMAC  1988  Digital Control of Rotor Vibrations  Z. Gosiewski  365   
ISROMAC  1988  Vibro-Impacts in a Geared Rotating System  R. Singh, H. Xie, and R. J. Comparin  241   
ISROMAC  1988  Turbo Machinery Design through Symbolic Processing  A. A. Grandhee and R. A. Moczadlo  393   
ISROMAC  1988  Machine System Configuration Design for Dynamic Response  Z. A. Parszewski, J. M. Krodkiewski, and K. Krynicki  409   
ISROMAC  1988  Gerotors-Design, Simulation, and Contact Analysis  C.-B Tsay  419   
ISROMAC  1988  Simulation of Unsteady Behavior of Gas Turbines  T. Schobeiri  435   
ISROMAC  1988  An Analytical Investigation on Multiple Solutions of Duffing Equation  J.-K. Xu  451   
ISROMAC  1990  Aeroelastic Analysis of Vertical Axis Wind Turbines  A. F. A. A. EI-Sayed  447   
ISROMAC  1988  Influence of Different Types of Seals on the Stability Behavior of Turbopumps  W Diewald and R. Nordmann  351   
ISROMAC  1988  A Three-Dimensional Finite-Difference Method for Calculating the Dynamic Coefficients of Seals  R. Nordmann and F. J. Dietzen  133   
ISROMAC  1988  Topics in Rotor Dynamics  J. W. Lund  27   
ISROMAC  1988  Vibration of High Speed Disk Rotors  W. Seemann and J. Wauer  35   
ISROMAC  1988  Rotor Modeling Considerations with Shaft Diameter Changes  R. W. Stephenson and K. E. Rouch  51   
ISROMAC  1988  Vibration Reduction and Isolation of Rotor-Bearings-Foundation System  G. Meng and z. -Q. Xue  61   
ISROMAC  1988  Development of an Advanced Hybrid Rotordynamics Model for Vibration Analysis of the Entire Structure of Marine Gas Turbine Engines  B. D. Thompson and R. H. Badgley  71   
ISROMAC  1988  The Elimination of Shaft Critical Speeds Using Parallel Hydrostatic and Squeeze Film Bearings  M. J. Goodwin, M. P. Roach, and J. E. T. Penny  85   
ISROMAC  1988  Multimode Whirl and Whip in Rotor Bearing Systems  A. Muszynska  269   
ISROMAC  1988  A Unified Mathematical Model for the Dynamics of Flexible Rotor-Journal Bearing Systems  V. H. Mucino, J. Cheng, and N. T. Sivaneri  115   
ISROMAC  1988  The Concept of an Impact Resonance Diagram for Characterizing the Nonlinear Response of Impact Vibration  T. O. Dalrymple  257   
ISROMAC  1988  Gyroscopic and Damping Effects on the Stability of a Noncontacting Flexibly-Mounted Rotor Mechanical Face Seal  I. Green  153   
ISROMAC  1988  Rotordynamic Coefficients for Labyrinth Seals Calculated by Means of a Finite Difference Technique  R. Nordmann and P. Weiser  175   
ISROMAC  1988  Finite Difference Analysis of Rotordynamic Seal Coefficients for an Eccentric Shaft Position  R. Nordmann and F. J. Dietzen  193   
ISROMAC  1988  Numerical Simulation of Cracked Rotor's Vibrations Due to Measured Crack Shapes  B. K. Schmalhorst  211   
ISROMAC  1988  Crack Detection in Turbine Rotors  A. D. Dimarogonas and C. A. Papadopoulos  227   
ISROMAC  1988  Vibration Analysis of Reactor Recirculation Pumps  P. E. Allaire, L. C. Martinez, L. E. Barrett, D. M. Bosi, and R. D. Flack  491   
ISROMAC  1988  Incorporating General Race and Housing Flexibility and Deadband in Rolling Element Bearing Analysis  R. R. Davis and C. S. Vallance  101   
ISROMAC  1990  Analysis of the Dynamic Behavior of Rotating Machines by Direct Measurement of Air Gap Variations  P. Talas and P. O. Toom  331   
ISROMAC  1990  An Analytical Investigation of a Cryogenic Journal Bearing  M. J. Braun and F. K. Choy  225   
ISROMAC  1990  Determination of Bearing Dynamic Coefficients from Unbalance Response in Flexible Rotor-Bearing Systems  S. - W. Hong and C. - W. Lee  239   
ISROMAC  1990  Electromagnetic Bearings, a Reasonable Element in Turbomachinery?  R. Siegwart and R. Truninger  253   
ISROMAC  1990  An Improvement on the Estimation of the Linear Dynamic Coefficients of Oil-Film Journal Bearing Considering Nonlinear Effect by Parameter Identification in the Frequency-Domain  R. H. Zhu, C. S. Chang, and X. K. Tang  269   
ISROMAC  1990  Dynamic Characteristics of an Overhung P/A Fan in Rolling Element and Fluid Film Bearings  E. J. Gunter, A. Hobbs, and C. Phelps  279   
ISROMAC  1988  Lateral Vibrations of Rotating Cantilever Beams Using Beam Characteristic Polynomials in Reissner Method  A. Kaushal and R. B. Bhat  465   
ISROMAC  1990  A Theoretical Calculation of the Pressure and Flow Field of Fluid Film Bearing Under Eccentric Large Whirl Orbit  C. -So Chang and H. -F. Cheng  319   
ISROMAC  1990  Rotordynamic Coefficients for Stepped Annular Gas Seals  C. C. Nelson, M. S. Dunn, and J. K. Scharrer  177   
ISROMAC  1990  Vibration Protection of Aeration Turbine Gear Motor  S. Gajin, S. Kuzmanovic, and G. Varju  349   
ISROMAC  1990  A Simple Procedure for Assessing Rotor Stability  K. E. Atkins, R. X. Perez, and D. M. Turner  361   
ISROMAC  1990  A Method to locate the Source of a Rotor Fluid-Induced Instability Along the Rotor  D. E. Bently and R. F. Bosmans  377   
ISROMAC  1990  Stability Behaviour of a Three Journal Bearing Rotor System Excited by a lateral Force  K. Kwanka  387   
ISROMAC  1990  The Role of Flow-Related Tangential Forces in Rotor/Bearing/Seal System Stability  A. Muszynska  401   
ISROMAC  1992  Virtual Instability in Rotor-Bearing System, Part II - Analysis  Lin, Y. Q.; Vance, J. M.  1052-1061  CN003683187 
ISROMAC  1990  Component Test Results from the Bearing Life Improvement Program for the Space Shuttle Main Engine Oxidizer Turbopumps  J. E. Keba  303   
ISROMAC  1990  The Influence of the Rotational Speed on the Transverse Vibrations of Rotating Discs  W Seemann  79   
ISROMAC  1988  An Approach to Improve Least Squares Method for Calculating Balancing Correction Masses by Using Successive Iteration  H. Gu, H. Ren, and J. Yang  513   
ISROMAC  1988  A Calculating Method for Nonlinear Torsional Vibration of Diesel Engine Shafting with Applications  M. -H. Zhu and B. Hou  523   
ISROMAC  1988  Torsional Vibration Response of a Multicylinder Diesel-Alternator Set  M. Ghosh and A. Rajamani  537   
ISROMAC  1990  Rotordynamic Software  S. H. Crandall   
ISROMAC  1990  Flexural Vibrations of Rotors Immersed in Dense Fluids: Part I-Theory  F. Axisa and J. Antunes  23   
ISROMAC  1990  Flexural Vibrations of Rotors Immersed in Dense Fluids: Part II- Experiments  J. Antunes, F. Axisa, and F. Hareux  39   
ISROMAC  1990  Rotordynamic Coefficients for Turbulent Annular Misaligned Seals  F. Simon and J. Frene  207   
ISROMAC  1990  Nonlinear Mechanism of Bistable Response of a Flexible Rotor Supported in Squeeze Film Dampers  G. Meng  69   
ISROMAC  1990  A Three Volume Bulk Flow Model for the Calculation of Rotordynamic Coefficients of Look-Through Labyrinths  R. Nordmann and P. Weiser  191   
ISROMAC  1990  Effects of Changing Structure Factors on Torsional Performance of Shaft Systems  J. H. Yang and Q. J. Meng  95   
ISROMAC  1990  Laboratory and Theoretical Investigations of the Vibrational Behaviour of a Uniform Rotor with a Transverse Crack  B. Schmalhorst  105   
ISROMAC  1990  Whirl of Turborotors at High Loads  A. D. Dimarogonas  121   
ISROMAC  1990  Dynamic Characteristics of Noncontacting Seal and Evaluation of Its Effect on Stability of Rotor System  T. Iwatsubo  139   
ISROMAC  1990  Flow Visualization in a Single Simulated Brush Seal  M. J. Braun, R. C. Hendricks, V. A. Canacci, and M. Kazmierchak  161   
ISROMAC  1990  Stability of Rotating Cylindrical Shells Including Nonlinear Stiffening  P. Ruge and Th. Plonski  435   
ISROMAC  1990  Blade Loss Dynamics of a Magnetically Supported Rotor  F. Viggiano and G. Schweitzer  53   
ISROMAC  1994  Film Cooling Effectiveness Data for Simple Injection Geometries: A Collection of Three-Axis Plots  Stone, L. D.; Goldstein, R. J.  424-440  CN038956553 
ISROMAC  1992  Modal Aspects of Cracks in Rotors  Horrigan, D. P. W.; Williams, J. F.; Parszewski, Z. A.  1035-1043  CN003683163 
ISROMAC  1994  Yaw Performance of a Small Horizontal Axis Wind Turbine with a Side Van  Sawada, T.; Su, Y.; Sugiyama, W.  356-367  CN038956498 
ISROMAC  1994  Aerodynamic Analysis Models for Vertical-Axis Wind Turbines  Brahimi, M. T.; Allet, A.; Paraschivoiu, I.  368-381  CN038956504 
ISROMAC  1994  Effect of Film Injection Location on Local Heat Transfer Coefficient on a Gas Turbine Blade  Mehendale, A. B.; Jiang, H. W.; Ekkad, S. V.; Han, J.-C.  382-397  CN038956516 
ISROMAC  1994  Heat Transfer Characteristics in a Rotating Square Channel with Radially Outward/Inward Throughflows  Mochizuki, S.; Murata, A.; Yang, W.-J.  398-408  CN038956528 
ISROMAC  1994  Effect of Inlet Duct and Diffusers on the Operating Range of Centrifugal Compressors  Agrawal, D. P.; Salim, B.; Singh, S. N.; Malhotra, R. C.  328-339  CN038956474 
ISROMAC  1994  Visualization of Local Heat Transfer in Serpentine Channels with Liquids Crystals  Lau, S. C.; Russell, L. M.; Thurman, D. R.; Hippensteele, S. A.  411-423  CN038956541 
ISROMAC  1994  A Study of Some Factors Affecting the Effectiveness of Casing Treatment in a Contra-rotating Axial Compressor Stage  Pundhir, D. S.  322-327  CN038956462 
ISROMAC  1994  Investigation of Three-Dimensional Leading Edge Film Cooling on Turbine Blades  Schulz, A.; Jiang, Z.; Sieger, K.; Wittig, S.  441-453  CN038956565 
ISROMAC  1994  Gas Turbine Blade Heat Transfer Calculations: An Assessment of Different Low - Reynolds Number k, epsilon- Turbulence Models  Sieger, K.; Schiele, R.; Schulz, A.; Wittig, S.  454-472  CN038956577 
ISROMAC  1994  A Numerical Investigation of Cooling of Leading Edge of Turbine Blade Using Forced Convection Heat Transfer  Murty, V. D.; Camden, M. P.; Clay, C. L.; Anselmo, E. R.  473-485  CN038956589 
ISROMAC  1994  Comparison of Film Cooling Performance Downstream of Compound Angle and Simple Angle Holes  Ligrani, P. M.  486-499  CN038956590 
ISROMAC  1994  Convective Heat Transfer in a Radially Rotating Square Duct with Wall-Transpiration  Yan, W. M.  500-511  CN038956607 
ISROMAC  1994  LHI Study of Developing Heat Transfer in a Duct with a Detached Rib Array  Liou, T. M.; Wang, W.-B.  512-531  CN038956619 
ISROMAC  1994  Turbulence and Scale Measurem