| Papers |
| Conference |
Year |
Paper Title |
Paper Author |
Page Number |
Other |
| TAMU Pump Show |
1984 |
Changes in Hydraulic Component Geometries Greatly Increased Power Plant Availability and Reduced Maintenance Costs: Case Histories |
Elemer Makay, James A. Barrett |
85 |
|
| TAMU Pump Show |
1984 |
Predicting & Improving the Dynamic Behavior of Multistage High Performance Pumps |
Ulrich Bolleter, Arno Frei, Dusan Florjancic |
1 |
|
| TAMU Pump Show |
1984 |
Introduction to Rotordynamics of Pumps Without Fluid Forces |
Malcolm E. Leader |
133 |
|
| TAMU Pump Show |
1984 |
Pump Specifications That Improve Mechanical Seal Performance |
James H. Ingram |
123 |
|
| TAMU Pump Show |
1984 |
Selection Strategy For Mechanical Shaft Seals In Petrochemical Plants |
Heinz P. Bloch |
115 |
|
| TAMU Pump Show |
1984 |
A Map of the Forest . . . Understanding Pump Suction Behavior: Where Do We Go From Here? |
Igor J. Karassik |
101 |
|
| TAMU Pump Show |
1984 |
Maintenance and Troubleshooting of Single-Stage Centrifugal Pumps |
W. Edward Nelson |
73 |
|
| TAMU Pump Show |
1984 |
Experimental Determination of the Reverse Flow Onset in a Centrifugal Impeller |
Jean Paul Barrand, Guy Caignaert, Richard Canavelis, P. Guiton |
63 |
|
| TAMU Pump Show |
1984 |
Air Model Testing to Determine Entrance Flow Fields |
Joseph A. Silvaggio, Jr., Hans Spring |
57 |
|
| TAMU Pump Show |
1984 |
Horizontal Process Pump Modifications to Comply with API-610 Sixth Edition Forces and Moments |
James E. Steiger |
47 |
|
| TAMU Pump Show |
1984 |
Improved Mechanical Seal Design Through Mathematical Modeling |
Richard F. Salant, William E. Key |
37 |
|
| TAMU Pump Show |
1984 |
Does Impeller Diameter Affect NPSHR? |
Daisuke Konno, Yoshiyuki Yamada |
29 |
|
| TAMU Pump Show |
1984 |
Acoustic Resonance Phenomena in High Energy Variable Speed Centrifugal Pumps |
Randal E. Schwartz, Richard M. Nelson |
23 |
|
| TAMU Pump Show |
1984 |
Control of Backflow at the Inlets of Centrifugal Pumps and Inducers |
Donald P. Sloteman, Paul Cooper, Jules L. Dussourd |
9 |
|
| TAMU Pump Show |
1984 |
Symmetrical Seal Design: A Sealing Concept for Today |
James P. Netzel |
109 |
|
| TAMU Pump Show |
1985 |
A Powerful Application and Troubleshooting Method for Mechanical Seals |
Thomas P. Will, Jr. |
85 |
|
| TAMU Pump Show |
1985 |
Flow Patterns Causing Instabilities in the Performance Curves of Centrifugal Pumps with Vaned Diffusers |
Peter Hergt, Jörg Starke |
67 |
|
| TAMU Pump Show |
1985 |
Reverse Indicator Cold Alignment with Graphical Plotting |
Charles Jackson |
129 |
|
| TAMU Pump Show |
1985 |
Reliability Improvement In Mechanical Seals—Analysis of Design Considerations |
Heinz P. Bloch, Wolfgang Schuebl |
115 |
|
| TAMU Pump Show |
1985 |
Flow Field Investigation for a Series of Right Angle Minimum Axial Depth Pump Intakes |
Joseph H. G. Howard, Paul Hermann |
93 |
|
| TAMU Pump Show |
1985 |
The Prediction of Bearing Lubricant Temperatures and Cooling Requirements for a Centrifugal Pump |
Charles A. Cappellino, James C. Osborne |
77 |
|
| TAMU Pump Show |
1985 |
Pump Selection and Application in a Pressurized Water Reactor Electric Generating Plant |
David M. Kitch |
47 |
|
| TAMU Pump Show |
1985 |
Screw Pumps of One, Two and Three Screw Design |
Joachim Wegener, Walter E. Cozza |
41 |
|
| TAMU Pump Show |
1985 |
Modern Cavitation Criteria for Centrifugal Pumps |
S. Gopalakrishnan |
3 |
|
| TAMU Pump Show |
1985 |
Experimental Study of the Influence of Backflow Control on Pump Hydraulic-Mechanical Interaction |
Paul J. Kasztejna, Charles C. Heald, Paul Cooper |
33 |
|
| TAMU Pump Show |
1985 |
Forces on Centrifugal Pump Impellers |
Belgacem Jery, Christopher E. Brennen, Thomas K. Caughey, Allan J. Acosta |
21 |
|
| TAMU Pump Show |
1985 |
A Solution for Variable Speed Vertical Pump Vibration Problems |
Malcolm E. Leader |
11 |
|
| TAMU Pump Show |
1985 |
Technical Features of Large Vertical Concrete Volute Pumps |
Richard Canavelis, Jean-Pierre Daux, François d'Incá, Jean-Louis E. Bloch |
105 |
|
| TAMU Pump Show |
1985 |
Critical Speed Analysis of an Eight-Stage Centrifugal Pump |
Kenneth E. Atkins, James D. Tison, J. C. Wachel |
59 |
|
| TAMU Pump Show |
1986 |
The Effect of Specific Speed on the Efficiency of Single Stage Centrifugal Pumps |
Eugene P. Sabini, Warren H. Fraser |
55 |
|
| TAMU Pump Show |
1986 |
Practical Considerations for Pump Baseplates, Grouting and Foundations |
Malcolm G. Murray, Jr. |
131 |
|
| TAMU Pump Show |
1986 |
API 610 Baseplate and Nozzle Loading Criteria |
James E. Steiger |
113 |
|
| TAMU Pump Show |
1986 |
Coatings for Centrifugal Pump Components |
Robert C. Tucker, Jr. |
107 |
|
| TAMU Pump Show |
1986 |
Pump-Pro—A Centrifugal Pump Diagnostic Expert System |
Thomas J. Fritsch |
97 |
|
| TAMU Pump Show |
1986 |
An Overview of Hardfaced Coatings for Industrial Use |
Edward R. Buchanan |
91 |
|
| TAMU Pump Show |
1986 |
Development of an Advanced Gas Turbine Driven High-Speed Centrifugal Pump for Injection Services |
Erio Benvenuti, Robert T. Ross |
77 |
|
| TAMU Pump Show |
1986 |
Visual Studies of Cavitation in Pumping Machinery |
Ronald Palgrave, Paul Cooper |
61 |
|
| TAMU Pump Show |
1986 |
Rotordynamic Developments for High Speed Multistage Pumps |
Stanley E. Pace, Stefan S. Florjancic, Ulrich Bolleter |
45 |
|
| TAMU Pump Show |
1986 |
Design of Pump Shaft Trains Having Variable-Speed Electric Motors |
Arno Frei, Andrej Grgic, Werner Heil, Armin Luzi |
33 |
|
| TAMU Pump Show |
1986 |
Analytical and Experimental Techniques for Solving Pump Structural Resonance Problems |
Robert E. Cornman |
27 |
|
| TAMU Pump Show |
1986 |
System Problem Experience in Multiple Reciprocating Pump Installations |
William W. Parry, Jr. |
21 |
|
| TAMU Pump Show |
1986 |
Gas-Liquid Flow Through Centrifugal Pumps—Correlation of Data |
Jim L. Turpin, James F. Lea, John L. Bearden |
13 |
|
| TAMU Pump Show |
1986 |
Power Recovery Turbines for the Process Industry |
S. Gopalakrishnan |
3 |
|
| TAMU Pump Show |
1986 |
Analysis of Nozzle Loads for Process Pumps |
Takio Shimizu, Hironori Teshiba |
69 |
|
| TAMU Pump Show |
1987 |
Solving the Vibration Problem of a Vertical Multistage Cryogenic Pump |
Ching M. Chang, Fred W. Braun |
85 |
|
| TAMU Pump Show |
1987 |
The Effects of Slurries on Centrifugal Pump Performance |
George Wilson |
19 |
|
| TAMU Pump Show |
1987 |
Pumps and Materials for Flue Gas Desulphurization Plants |
Winfried Schöffler |
133 |
|
| TAMU Pump Show |
1987 |
Development of an Incipient Failure Detection Technique for Mechanical Seals |
Tadashi Kataoka, Chishiro Yamashina, Masahiro Komatsu |
121 |
|
| TAMU Pump Show |
1987 |
Pump Vibration Analysis for the Amateur |
W. Edward Nelson |
109 |
|
| TAMU Pump Show |
1987 |
Economically Matching Circulation Water Flow to Cooling Tower Load |
David A. Fairbanks |
103 |
|
| TAMU Pump Show |
1987 |
The Effect of Design Features on Centrifugal Pump Efficiency |
Eugene P. Sabini, Warren H. Fraser |
97 |
|
| TAMU Pump Show |
1987 |
Complete Analysis and Simulation of Reciprocating Pumps Including System Piping |
Pawan J. Singh, Nateri K. Madavan |
55 |
|
| TAMU Pump Show |
1987 |
Development of Experience with a New Thrust Bearing System for Centrifugal Pumps |
Hurlel G. Elliott, Donald W. Rice |
3 |
|
| TAMU Pump Show |
1987 |
Experiences with a Numerical Method of Calculating Slurry Pump Casing Wear |
Graeme R. Addie, Robert J. Visintainer, Mihail C. Roco |
27 |
|
| TAMU Pump Show |
1987 |
Considerations for Proper Sizing and Material Selection to Optimize Slurry Pump Performance |
Gary Davidson |
35 |
|
| TAMU Pump Show |
1987 |
Reducing ANSI Pump Maintenance Costs Through Component Upgrades |
Joseph B. Dosch |
9 |
|
| TAMU Pump Show |
1987 |
Vibration Monitoring of Vertically Mounted Pumps—Tools for Manufacturers and Users |
Thomas J. Walter, Matthew M. Marchione, H. Gordon Shugars |
75 |
|
| TAMU Pump Show |
1988 |
High Head-Low Flow Centrifugal Pumps |
Conrad C. Mowrey |
155 |
|
| TAMU Pump Show |
1988 |
Characteristics of the Reciprocating Pump |
John E. Miller |
163 |
|
| TAMU Pump Show |
1988 |
User Experience with Portable Data Terminals in a Machinery Monitoring Program |
John M. Cummings |
147 |
|
| TAMU Pump Show |
1988 |
Condition Monitoring of Rolling Element Bearings Installed in Centrifugal Pumps |
Jerome A. Lorenc |
135 |
|
| TAMU Pump Show |
1988 |
An Open Letter to the Pump Industry |
Igor J. Karassik, J. T. McGuire |
129 |
|
| TAMU Pump Show |
1988 |
Pump Baseplate Installation and Grouting |
Perry C. Monroe, Jr. |
117 |
|
| TAMU Pump Show |
1988 |
Design and Operation of Pumps for Hot Standby Service |
Charles C. Heald, David G. Penry |
109 |
|
| TAMU Pump Show |
1988 |
Centrifugal Pump Specification and Selection—A System's Approach |
Stan T. Shiels |
93 |
|
| TAMU Pump Show |
1988 |
A New Computer Program for Pump Rotordynamic Analysis |
Jorgen L. Nikolajsen, Richard J. Gajan |
11 |
|
| TAMU Pump Show |
1988 |
Rotordynamic Considerations in the Design of High Speed, Multistage Centrifugal Pumps |
Jan J. Verhoeven |
81 |
|
| TAMU Pump Show |
1988 |
Specifying Minimum Flow |
Paul Cooper, James A. Barrett, Peter R. Stech, S. Gopalakrishnan, W. Edward Nelson, Charles C. Heald, Bruno Schiavello |
177 |
|
| TAMU Pump Show |
1988 |
Solutions to Abrasive Wear-Related Rotordynamic Instability Problems on Prudhoe Bay Injection Pumps |
Robert A. Valantas, Ulrich Bolleter |
3 |
|
| TAMU Pump Show |
1988 |
Face Seal Balance Ratio Selection for Two Phase Single and Multicomponent Mixtures |
Alan O. Lebeck |
17 |
|
| TAMU Pump Show |
1988 |
Metal Bellows Mechanical Face Seals for High Performance Pump Applications |
Amit Datta, James F. Gardner, James U. Derby, David P. Casucci |
27 |
|
| TAMU Pump Show |
1988 |
A New Method for Computing Minimum Flow |
S. Gopalakrishnan |
41 |
|
| TAMU Pump Show |
1988 |
Reliability and Future Development of High Pressure Diaphragm Pumps for Process Service |
Gerhard Vetter |
49 |
|
| TAMU Pump Show |
1988 |
Vertical Diffuser Type Turbine, Mixed-Flow, and Axial-Flow Propeller Pumps—A Brief Overview |
Herman A. J. Greutink |
65 |
|
| TAMU Pump Show |
1988 |
New Developed Multistage Variable Speed Drive (MSVD) of High Economy for the Speed Control of Pumps with Power Up to 40,000 HP |
Walter Rappold |
73 |
|
| TAMU Pump Show |
1989 |
Centrifugal Pump Hydraulics for Low Specific Speed Applications |
Trygve Dahl |
31 |
|
| TAMU Pump Show |
1989 |
Rolling Bearings in Centrifugal Pumps |
Keith E. Meyers |
91 |
|
| TAMU Pump Show |
1989 |
Dry Start Bearing for Vertical Pumps |
Hiroshi Satoh, Hirohisa Takeda |
75 |
|
| TAMU Pump Show |
1989 |
Design, Construction & Test of Magnetic Bearings in an Industrial Canned Motor Pump |
Paul E. Allaire, Joseph Imlach, John P. McDonald, R. R. Humphris, D. W. Lewis, B. B. Banerjee, B. J. Blair, J. Claydon, R. D. Flack |
65 |
|
| TAMU Pump Show |
1989 |
The Development of an Advanced Mechanical Seal for Slurry Applications |
Duncan K. Irons |
59 |
|
| TAMU Pump Show |
1989 |
Inspection and Quality Control |
Joe H. Babineaux |
101 |
|
| TAMU Pump Show |
1989 |
Reciprocating Pump Valve Design |
Gerhard Vetter, Erwin Thiel, Ulrich Störk |
39 |
|
| TAMU Pump Show |
1989 |
Vibration Behavior of Heber Hydrocarbon Booster Pumps |
Donald W. McLaughlin, John F. Nagy, Jonne L. Berning |
23 |
|
| TAMU Pump Show |
1989 |
Vibration Assessment of Variable Speed Vertically Mounted Pumps |
Thomas J. Walter, Shalom Zelingher |
17 |
|
| TAMU Pump Show |
1989 |
Heat Transfer in Mechanical Seals |
Gordon S. Buck |
9 |
|
| TAMU Pump Show |
1989 |
The Effect of Seal Chamber Design on Seal Performance |
Michael P. Davison |
3 |
|
| TAMU Pump Show |
1989 |
Upstream Pumping: New Developments in Mechanical Seal Designs |
Afzal Ali |
53 |
|
| TAMU Pump Show |
1990 |
Root Cause Analysis of Five Costly Centrifugal Pump Failures |
Heinz P. Bloch |
15 |
|
| TAMU Pump Show |
1990 |
Selection of Coatings for Pump Applications |
Paul S. Gupton |
135 |
|
| TAMU Pump Show |
1990 |
A User's View of Sealless Pumps—Their Economics, Reliability, and the Environment |
Ronald G. Eierman |
127 |
|
| TAMU Pump Show |
1990 |
Vibration Monitoring and Analysis of Pumps |
Kevin R. Guy |
123 |
|
| TAMU Pump Show |
1990 |
And What of the Future? |
Igor J. Karassik |
119 |
|
| TAMU Pump Show |
1990 |
Rotordynamic and Dry Running Behavior of a Full Scale Test Boiler Feed Pump |
Arno Frei, Johann Gulich, Guenther Eichhorn, Josef Eberl, Thomas H. McCloskey |
81 |
|
| TAMU Pump Show |
1990 |
ISO 5199 Standard Addresses Today's Reliability Requirements for Chemical Process Pumps |
Peter Fabeck, R. Barry Erickson |
101 |
|
| TAMU Pump Show |
1990 |
Magnetically Driven Centrifugal Pumps: Eliminating Seal Problems in Refinery and Chemical Processing Plant Equipment |
Jared D. Mayes |
93 |
|
| TAMU Pump Show |
1990 |
Design, Construction, and Applications of Magnetically Coupled Centrifugal Pumps |
Harry Schommer, Thomas G. Johnson |
63 |
|
| TAMU Pump Show |
1990 |
Design of Magnetically Driven Chemical Pump to Fit ANSI B73.1 Dimensions Using a Semiopen Impeller |
Frederic W. Buse, C. Dean Stoughton |
55 |
|
| TAMU Pump Show |
1990 |
Improving Pump Reliability in Light Hydrocarbon and Condensate Service with Metal Filled Graphite Wear Parts |
Robert P. Komin |
49 |
|
| TAMU Pump Show |
1990 |
Considerations in Hot and Cold Alignment and Couplings |
Charles Jackson |
27 |
|
| TAMU Pump Show |
1990 |
Experimental Evaluation of Bladder Type Dampeners for Reciprocating Pumps |
Pawan J. Singh, William K. Chaplis |
39 |
|
| TAMU Pump Show |
1990 |
Evolution of a Mechanical Seal Condition Monitoring System |
Frank Olmos |
9 |
|
| TAMU Pump Show |
1990 |
New Developments in Standby Seals for Applications for Environmentally Sensitive Duties |
Jeremy Heatley, Matthew Giffrow |
3 |
|
| TAMU Pump Show |
1990 |
Pump Rotor Critical Speeds Diagnosis and Solutions |
Dennis G. Bowman, William D. Marscher, Stephen R. Reid |
73 |
|
| TAMU Pump Show |
1991 |
Analysis of the Thermal Behavior in the Sealing Cavity of an Overhung API Process Pump |
Lev Nelik |
57 |
|
| TAMU Pump Show |
1991 |
Supplier Quality Improvement Process |
Richard M. Dubner |
147 |
|
| TAMU Pump Show |
1991 |
A User's Engineering Review of Sealless Pump Design Limitations and Features |
Terry Hernandez |
129 |
|
| TAMU Pump Show |
1991 |
Single Plane Balancing |
Charles Jackson |
105 |
|
| TAMU Pump Show |
1991 |
Techniques for Eddy Current Reduction in Magnetic Drives Using Metallic Containment Barriers |
Jeffrey H. Smith, John B. Oliver |
97 |
|
| TAMU Pump Show |
1991 |
Dual Containment Shells—Added Safety for Magnetically Driven Pumps |
Peter Rix, Ron McLean |
85 |
|
| TAMU Pump Show |
1991 |
Changes in Pump Vibration Levels Caused by the Misalignment of Different Style Couplings |
Jerome A. Lorenc |
63 |
|
| TAMU Pump Show |
1991 |
Tandem Seals for Near Zero Hydrocarbon Emissions |
William E. Key, George Wang, Kenneth E. Lavelle |
49 |
|
| TAMU Pump Show |
1991 |
Efficient Multiphase Pump Station for Onshore Application and Prospects for Offshore Application |
Winfried Neumann |
43 |
|
| TAMU Pump Show |
1991 |
An Integral Balance Piston for Centrifugal Pump Impellers |
Kevin Fairman, William J. Mabe |
29 |
|
| TAMU Pump Show |
1991 |
Solution to Cavitation Induced Vibration Problems in Crude Oil Pipeline Pumps |
Ulrich Bolleter, Diether Schwarz, Brian Carney, Earl A. Gordon |
21 |
|
| TAMU Pump Show |
1991 |
Elimination of Cavitation-Related Instabilities and Damage in High-Energy Pump Impellers |
Paul Cooper, Donald P. Sloteman, Edward Graf, Dirk J. Vlaming |
1 |
|
| TAMU Pump Show |
1991 |
Measurement and Prediction of Full Scale Annular Seal Coefficients |
Stefan S. Florjancic, Thomas H. McCloskey |
71 |
|
| TAMU Pump Show |
1992 |
Design and Operation Refinement of a Multistage Light Hydrocarbon Pump |
Kenneth R. Laplant, Charles R. Rutan |
77 |
|
| TAMU Pump Show |
1992 |
Development of a Magnetic Bearing API Process Pump with a Canned Motor |
Lloyd Hanson, Joseph Imlach |
3 |
|
| TAMU Pump Show |
1992 |
Pump Vibrations |
W. Edward Nelson, J. W. Dufour |
137 |
|
| TAMU Pump Show |
1992 |
Smoke or Substance?...Some Misconceptions about Desirable Construction Features of Centrifugal Pumps |
Igor J. Karassik |
129 |
|
| TAMU Pump Show |
1992 |
Corrosion in Pumps |
Ronald S. Miller |
119 |
|
| TAMU Pump Show |
1992 |
Progressing Cavity Pumps Proper Selection and Application |
Alan G. Wild |
111 |
|
| TAMU Pump Show |
1992 |
Affordable Quasi Three-Dimensional Inverse Design Method for Pump Impellers |
Hans Spring |
97 |
|
| TAMU Pump Show |
1992 |
Evaluation of Coating for Resistance to Abrasive and Adhesive Wear in Pump Components |
Colin McCaul, Roger Kaufold |
89 |
|
| TAMU Pump Show |
1992 |
Mechanical Seal Chamber Design for Improved Performance |
Neal D. Barnes, Robert K. Flitney, B.S. Nau |
61 |
|
| TAMU Pump Show |
1992 |
Design Considerations and Application Guidelines for Pumping Liquids with Entrained Gas Using Open Impeller Centrifugal Pumps |
Charles A. Cappellino, Daniel R. Roll, George Wilson |
51 |
|
| TAMU Pump Show |
1992 |
Liquefied Natural Gas Pump with Hydrostatic Journal Bearings |
Tatsuo Katayama, Akihisa Okada |
39 |
|
| TAMU Pump Show |
1992 |
Inside the Sealless Pump |
John Veness, Clifford J. Steer, Steven Rose |
29 |
|
| TAMU Pump Show |
1992 |
Development and Qualification of a Magnetically Coupled Process Pump for API 610 7th Edition Services |
Charles C. Heald, Paul W. Behnke, Richard F. Gussert |
9 |
|
| TAMU Pump Show |
1992 |
Zero Emission Solutions for Mechanical Seals on Light Hydrocarbons |
Neil M. Wallace, J.A.M. ten Houte de Lange |
69 |
|
| TAMU Pump Show |
1992 |
Benefits of a Balanced Interference Fit Bellows Seal Design in High Temperature Corrosive Applications |
David P. Casucci, William J. McCollough |
23 |
|
| TAMU Pump Show |
1993 |
Dynamic Loading on Pumps—Causes for Vibration |
Stefan S. Florjancic, Arno Frei |
171 |
|
| TAMU Pump Show |
1993 |
Using Fault Trees to Determine the Root Causes of Rotating Equipment Failures |
Robert X. Perez |
185 |
|
| TAMU Pump Show |
1993 |
Canned Motor and Magnetically Coupled Pumps—Applications, Operations, and Maintenance in a Chemical Plant |
Melmut Vollmüller, Willi Seifert, Kenneth B. Fischer |
109 |
|
| TAMU Pump Show |
1993 |
Controlling Emissions to Atmosphere Through the Use of a Dry-Sliding Secondary Containment Seal |
Patrick M. Flach, Jan E. Sandgren, David P. Casucci |
55 |
|
| TAMU Pump Show |
1993 |
Corrosion in Pumps and Other Damage Mechanisms |
Ronald S. Miller |
119 |
|
| TAMU Pump Show |
1993 |
Cavitation and Recirculation Troubleshooting Methodology |
Bruno Schiavello |
133 |
|
| TAMU Pump Show |
1993 |
Hydraulic Institute Sealless Standards |
Joseph A. Cleary, Barry Erickson, Erik Fiske, H. Ray Perriman |
169 |
|
| TAMU Pump Show |
1993 |
Vibration Problems with an Electric Motor for a Centrifugal Pump Installation |
Lawrence Wray |
97 |
|
| TAMU Pump Show |
1993 |
Application of Variable Speed Electric Motors for Pumps |
Stephen P. Murphy |
157 |
|
| TAMU Pump Show |
1993 |
Magnetic Fluid Seal System for Control of Pump Fugitive Emissions |
William E. Key, Lionel A. Young, Will B. Mraz, Paul McMahan, Thomas J. Black |
3 |
|
| TAMU Pump Show |
1993 |
A Case History—Improved Hydraulic Design Lowers Cavitation Erosion and Vibrations of a Water Transport Pump |
Stefan S. Florjancic, Alan D. Clother, Francisco Javier Lopez Chavez |
81 |
|
| TAMU Pump Show |
1993 |
Sintered Alpha Silicon Carbide Pump Bearings—Tribological Materials Optimization to Improve Reliability |
Heinrich Knoch, Josef Kracker, William D. Long |
63 |
|
| TAMU Pump Show |
1993 |
Design and Testing of a Zero-Net Radial Taper, Radially Compliant Face Seal |
Alan O. Lebeck |
49 |
|
| TAMU Pump Show |
1993 |
Model Predictions and Experimental Results for the Rotordynamic Characteristics of Leakage Flows in Centrifugal Pumps |
Adiel Guinzburg, Christopher E. Brennen |
41 |
|
| TAMU Pump Show |
1993 |
Pressure Pulsation Dampening Methods for Reciprocating Pumps |
Gerhard Vetter, Bernd Seidl |
25 |
|
| TAMU Pump Show |
1993 |
Enhanced Mechanical Seal Performance Through Proper Selection and Application of Enlarged-Bore Seal Chambers |
William V. Adams, Richard H. Robinson, James S. Budrow |
15 |
|
| TAMU Pump Show |
1993 |
The Shortcomings of Using Pump Suction Specific Speed Alone to Avoid Suction Recirculation Problems |
Allan R. Budris |
91 |
|
| TAMU Pump Show |
1993 |
Shaft Sizing for Multistage Pumps |
Ulrich Bolleter, Arno Frei |
71 |
|
| TAMU Pump Show |
1994 |
Rotating Equipment Pump Reliability Upgrading Project |
Ed Ringstead |
77 |
|
| TAMU Pump Show |
1994 |
Improvement of a High Temperature Bellows Seal |
William E. Key, Ronald L. Grace, Kenneth E. Lavelle, Lionel A. Young, George Wang, Al C. Holman |
95 |
|
| TAMU Pump Show |
1994 |
Sealless Centrifugal Pumps |
David Littlefield |
115 |
|
| TAMU Pump Show |
1994 |
How to Avoid Building Problems into your Pumping Systems |
W. Edward Nelson, John W. Dufour |
125 |
|
| TAMU Pump Show |
1994 |
Reliability Improvements to a High Pressure, High Temperature, Thirteen Stage Charge Pump |
Dave A. Johns |
69 |
|
| TAMU Pump Show |
1994 |
Composite Pumps |
Frederic W. Buse |
141 |
|
| TAMU Pump Show |
1994 |
Computational Fluid Dynamical Analysis of Complex Internal Flows in Centrifugal Pumps |
Paul Cooper, Edward Graf, Timothy Luce |
83 |
|
| TAMU Pump Show |
1994 |
Positive Displacement Pumps—Performance and Application |
David B. Parker |
137 |
|
| TAMU Pump Show |
1994 |
A Team Approach to Quality Pump Procurement and Installation |
Karen Self, Stephen Treichler, Mohammad Zamin |
3 |
|
| TAMU Pump Show |
1994 |
CMA/STLE Pump Seal Mass Emissions Study |
Thomas Kittleman, Michael Pope, William V. Adams |
57 |
|
| TAMU Pump Show |
1994 |
Analysis and Testing of Alternative Bearings Materials for Applications in Sealless Pumps |
Jerome A. Lorenc, Lev Nelik |
51 |
|
| TAMU Pump Show |
1994 |
Monitoring Sealless Pumps for Metal-to-Metal Contact of the Internal Rotor |
Julien Le Bleu, Jr. |
41 |
|
| TAMU Pump Show |
1994 |
The Role of Off-Design Pump Operation on Mechanical Seal Performance |
William V. Adams, Lee A. Waling, Randy R. Dingman, Joseph C. Parker |
29 |
|
| TAMU Pump Show |
1994 |
The Development of Low Friction, Low Leakage Mechanical Seals Using Laser Technology |
Neil M. Wallace, Heinz Konrad Müller |
19 |
|
| TAMU Pump Show |
1994 |
Thermal Test Analysis of Bearing Frame Inline Pumps on High Temperature Service |
Bruce E. Freeland, Charles A. Cappellino, Douglas Paddock |
11 |
|
| TAMU Pump Show |
1994 |
Oil Mist Lubrication for the Petro Chemical Industry |
Charlie Towne |
107 |
|
| TAMU Pump Show |
1994 |
Design and Development of Gas Lubricated Seals for Pumps |
James R. Wasser, Rick Sailer, Greg Warne |
63 |
|
| TAMU Pump Show |
1995 |
Dry Running Tests Utilizing Silicon Carbide Bearings and Polymer Lubricating Strips with Conductive and Nonconductive Containment Shells in an ANSI Magnetic Drive Pump |
Anthony E. Stavale |
77 |
|
| TAMU Pump Show |
1995 |
Dry Running Bellows Type Tandem Seals for VOC Services |
Reid W. Engstrom, David P. Casucci, Michael Kotlyar |
83 |
|
| TAMU Pump Show |
1995 |
Testing and Field Performance of a High Duty NGL Pipeline Seal |
Kenneth E. Lavelle, William J. Woods |
89 |
|
| TAMU Pump Show |
1995 |
Magnetic Bearings as an Impeller Force Measurement Technique |
Adiel Guinzburg, Frederic W. Buse |
69 |
|
| TAMU Pump Show |
1995 |
Judge the Pump Hydraulic Design Through Numbers Before You Buy |
Hans Spring |
113 |
|
| TAMU Pump Show |
1995 |
Design and Implementation of a Mechanical Seal Improvement Program at an Oil Refinery |
Johnny J. Pellin, William J. McCollough |
11 |
|
| TAMU Pump Show |
1995 |
Experimental Evaluation of High Energy Pump Improvements Including Effects of Upstream Piping |
Donald P. Sloteman, Timothy L. Wotring, Patrick March, Dan McBee, Larry Moody |
97 |
|
| TAMU Pump Show |
1995 |
Effect of Mechanical Unbalance on Vibrations, Forces and Reliability of a Single-Stage Centrifugal Pump |
Lev Nelik, Charles Jackson |
61 |
|
| TAMU Pump Show |
1995 |
Understand Progressing Cavity Pumps Characteristics and a Void Abrasive Wear |
Gerhard Vetter, Wolfgang Wirth |
47 |
|
| TAMU Pump Show |
1995 |
Modern Manufacturing of Advanced Impeller and Diffuser Vane Profiles |
Helmut Riegger, Alexander Nicklas |
37 |
|
| TAMU Pump Show |
1995 |
Dual Gas Sealing Technology for Pumps |
William V. Adams, Randy R. Dingman, Joseph C. Parker |
19 |
|
| TAMU Pump Show |
1995 |
Justifying the Reinstallation and Upgrading of Problem ANSI Pumps at an Operating Chemical Plant |
Joseph F. Dolniak |
3 |
|
| TAMU Pump Show |
1995 |
Centrifugal Pumps Inspection and Testing |
Vinod P. Patel, James R. Bro |
143 |
|
| TAMU Pump Show |
1995 |
Design and Testing of Dual Seal Series Arrangements for Pressurized Barrier Fluid |
Kenneth E. Lavelle, William E. Key, Al C. Holman |
31 |
|
| TAMU Pump Show |
1995 |
The Road to Reliable Pumps |
Perry C. Monroe, Jr. |
125 |
|
| TAMU Pump Show |
1995 |
A Name Well Chosen |
Igor J. Karassik |
121 |
|
| TAMU Pump Show |
1995 |
Centrifugal Pump Application—Key Hydraulic and Performance Criteria |
Stan T. Shiels |
151 |
|
| TAMU Pump Show |
1995 |
Shaft Alignment |
Jack Essinger |
163 |
|
| TAMU Pump Show |
1995 |
Monitoring Repairs to Your Pumps |
W. Edward Nelson |
189 |
|
| TAMU Pump Show |
1995 |
Diaphragm Development Trends for Safe Leakfree Reciprocating Process Pumps |
Gerhard Vetter, Eberhard Schlücker, Waldemar Horn, William E. Neis |
207 |
|
| TAMU Pump Show |
1995 |
The Effects of Valve Dynamics on Reciprocating Pump Reliability |
Stephen M. Price, Donald R. Smith, James D. Tison |
221 |
|
| TAMU Pump Show |
1996 |
ASME B73.1M Pump Reliability Program Formation—A Data Based Approach |
Steven J. Hrivnak |
115 |
|
| TAMU Pump Show |
1996 |
Determination of NPSHR for Reciprocating Positive Displacement Pumps—A New Approach |
Pawan J. Singh, Stephen D. Able |
131 |
|
| TAMU Pump Show |
1996 |
Abrasive Wear in Pumps—A Tribometric Approach to Improve Pump Life |
Gerhard Vetter, Ralph Kießling, Wolfgang Wirth |
143 |
|
| TAMU Pump Show |
1996 |
Multiphase Gas-Liquid Pumping |
Paul Cooper, Bruno Schiavello, Charles de Marolles, Jacques de Salis, Allan J. Prang, Daniel H. Broussard |
159 |
|
| TAMU Pump Show |
1996 |
The Use of Basic Hydraulics to Solve Field Problems |
Lev Nelik, Joseph A. Silvaggio, Jr., John P. Joseph II, Jeffery Freeman |
175 |
|
| TAMU Pump Show |
1996 |
The Control of Variable Speed Pumps in Parallel Operation |
Anthony B. Crease |
97 |
|
| TAMU Pump Show |
1996 |
Slurry Pipeline Design for Operation with Centrifugal Pumps |
Graeme R. Addie |
193 |
|
| TAMU Pump Show |
1996 |
Mag Drive Pumps: Why They Work—How They Fail |
Micheal T. Stevens |
105 |
|
| TAMU Pump Show |
1996 |
Material Problems and Solutions—A Metallurgical Perspective |
Colin McCaul |
183 |
|
| TAMU Pump Show |
1996 |
The Suction Performance of Centrifugal Pumps Possibilities and Limits of Improvements |
Peter Hergt, Alexander Nicklas, Gerhard Moellenkopf, S. Brodersen |
13 |
|
| TAMU Pump Show |
1996 |
Improved Mechanical Seal for High Pressure Pumps in Severe Abrasive Tailings Services |
Rod Mosher, Doug McCullough, Frank E. Manning |
125 |
|
| TAMU Pump Show |
1996 |
Experimental Investigations in Respect to the Relevance of Suction Specific Speed for the Performance and Reliability of Centrifugal Pumps |
Bernd Stoffel, Ralf Jaeger |
3 |
|
| TAMU Pump Show |
1996 |
A Case Study: Unusual Problems Discovered During the Rerate of 2800 HP Boiler Feedwater Pumps and Turbines |
John P. Henderson |
89 |
|
| TAMU Pump Show |
1996 |
Design and Testing of Seals to Meet API 682 Requirements |
Ralph Gabriel, Syed K. Niamathullah |
27 |
|
| TAMU Pump Show |
1996 |
Development of a Noncontacting Seal for Gas/Liquid Applications Using Wavy Face Technology |
Lionel A. Young, William E. Key, Ronald L. Grace |
39 |
|
| TAMU Pump Show |
1996 |
Centrifugal Pump Vibration Caused by Supersynchronous Shaft Instability |
Donald R. Smith, Stephen M. Price, Friedrich K. Kunz |
47 |
|
| TAMU Pump Show |
1996 |
Torsional Vibration in Pump/Driver Shaft Trains—The Role of External Damping From Pump Impellers |
Rainer Nordmann, Peter Weiser, Arno Frei, Rudolf Stuerchler |
61 |
|
| TAMU Pump Show |
1996 |
Field Investigation of Bearing Housing Oil Cleanliness |
William V. Adams, R. Barry Erickson, Bill Needelman, Michael D. Smith |
71 |
|
| TAMU Pump Show |
1996 |
Double Row Angular Contact Ball Bearings in Centrifugal Pumps |
Keith E. Meyers |
81 |
|
| TAMU Pump Show |
1997 |
Diamond Like Carbon Coatings-Tribological Possibilities and Limitations in Applications on Sintered Silicon Carbide Bearing and Seal Faces |
Michael Fundus and Heinrich Knoch |
93 |
|
| TAMU Pump Show |
1997 |
Replacement of the Boiler FeedPumps During the Retrofit of the 500 MW Units at a German Power Station |
Cord H. Laux, Uwe Burchhardt, and Uwe Kirstein |
15 |
|
| TAMU Pump Show |
1997 |
The Application of Hydraulically Actuated Diaphragm Metering Pumps |
Daniel W. Chacchia |
161 |
|
| TAMU Pump Show |
1997 |
Air Operated Double Diaphragm Pumps |
Charles W. Taylor and William F. Versaw |
157 |
|
| TAMU Pump Show |
1997 |
Progressing Cavity Pump |
Kent Whitmire |
149 |
|
| TAMU Pump Show |
1997 |
Application of the Pitot Pump |
Thomas L. Angle, Aleksander S. Roudnev, and James G. Shaw |
144 |
|
| TAMU Pump Show |
1997 |
Oil Lubrication Systems for Process Pumps and Related Equipment |
Vinod P. Patel and Donald G. Coppins |
129 |
|
| TAMU Pump Show |
1997 |
Present Limits of Operation of Product Lubricated and Magnetic Bearings in Pumps |
Michael K. Swann, Jonathan Watkins, and Kevin R. Bornstein |
113 |
|
| TAMU Pump Show |
1997 |
Pump Life-Cycles and the Internet-Utilizing Technology to Improve Pump Reliability |
Paul Shank |
105 |
|
| TAMU Pump Show |
1997 |
A Comparison of Positive Displacement and Centrifugal Pump Applications |
John E. Purcell and Joseph A. Silvaggio, Jr. |
99 |
|
| TAMU Pump Show |
1997 |
Troubleshooting Tactics to Improve Pump Mean Time Between Repairs |
John P. Joseph II and Perry C. Monroe Jr. |
171 |
|
| TAMU Pump Show |
1997 |
Pressure Ratings of Mechanical Seals |
Gordon S. Buck |
7 |
|
| TAMU Pump Show |
1997 |
Development and Field Test Results of High Performance Seals for an NGL Injection Pump |
Thomas D. Maceyka, Peter Kay, and David R. Leet |
35 |
|
| TAMU Pump Show |
1997 |
Mechanical Seal Reliability Improved with API Piping Plans 23 |
V. Ray Dodd and Thomas E. Hinkel |
1 |
|
| TAMU Pump Show |
1997 |
Bone-Dry Running Tests Utilizing Diamond Like Carbon Coated Silicon Carbide Bearings and Polymer Lubricating Strips in an Ansi Magnetic Drive Pump |
Anthony E. Stavale |
85 |
|
| TAMU Pump Show |
1997 |
Rebuilding Process Pumps to Comply with Fugitive Emissions Standards |
Stephen C. Rossi and John B. Cary |
25 |
|
| TAMU Pump Show |
1997 |
Control Valve Induced Pipeline Vibrations in a Paper Pulp Pumping System |
Andrew L. Lewis, Fred R. Szenasi, and Daniel R. Roll |
49 |
|
| TAMU Pump Show |
1997 |
The Application of Computer Simulation and Real-Time Monitoring to Minimize the Pressure Pulsations in Complex Pumping Systems |
Edward Graf and John F. Marchi, Jr. |
61 |
|
| TAMU Pump Show |
1997 |
Two-Phase Flow Performance of a Heat Transport Pump |
H. Samarasekera |
69 |
|
| TAMU Pump Show |
1997 |
Twenty-Three Years Operating Experience with the World's Largest Boiler Feedwater Pump |
Frank L. Michell, Daniel H. Drew, Timothy L. Wotring, and Richard P. Koch |
75 |
|
| TAMU Pump Show |
1997 |
Design and Application of Dual Gas Seals for Small Bore Seal Chambers |
Alan O'Brien and James R. Wasser |
43 |
|
| TAMU Pump Show |
1998 |
Sleeve Type Bearings and Their Lubrication Systems In Vertical Turbine Pumps, Mixed Flow and Axial Flow Pumps |
Herman A.J. Greutink |
205 |
|
| TAMU Pump Show |
1998 |
Severe Suction Bell Damage in Large, Open Impeller, Vertical Turbine Pumps |
Michael D. Smith |
119 |
|
| TAMU Pump Show |
1998 |
Continuous Monitoring of Sealless Pumps—The Next Step |
Julien Le Bleu, Jr., James Lobach |
125 |
|
| TAMU Pump Show |
1998 |
Using Fiber-Optic Pressure Sensors to Detect Cavitation and Flow Instabilities in Centrifugal Pumps |
Robert X. Perez, Chung E. Lee, Henry F. Taylor |
133 |
|
| TAMU Pump Show |
1998 |
High Temperature Twin Screw Pumps |
David B. Parker |
139 |
|
| TAMU Pump Show |
1998 |
Methods of Investigation and Solution Of Stress, Vibration, and Noise Problems in Pumps |
William D. Marscher, Jack S. Campbell |
143 |
|
| TAMU Pump Show |
1998 |
Reciprocating Pump Dynamic Concepts for Improved Pump Operations |
Larry E. Blodgett |
211 |
|
| TAMU Pump Show |
1998 |
Pump Rotordynamics Made Simple |
Mark A. Corbo, Stanley B. Malanoski |
167 |
|
| TAMU Pump Show |
1998 |
Computer Simulation of the Flowpath in Magnetic Sealless Pumps |
Adiel Guinzburg, Frederic W. Buse |
1 |
|
| TAMU Pump Show |
1998 |
Pump Impeller Lifetime Improvement Through Visual Study of Leading-edge Cavitation |
Frank C. Visser, Jack J.M. Backx, Jan Geerts, Mike Cugal, D. Miguel Medina Torres |
109 |
|
| TAMU Pump Show |
1998 |
Polymer Composite Industrial Chemical Pumps |
Frederic W. Buse, Charles A. Cappellino, Robert C. Rollings |
157 |
|
| TAMU Pump Show |
1998 |
CFD Analysis of a Double Suction Cooling Water Pump |
John P. Pembroke, Eugene P. Sabini, David E. Littlefield |
11 |
|
| TAMU Pump Show |
1998 |
Application Guidelines for Pumping Liquids That Have a Large Dissolved Gas Content |
Daniel W. Wood, Robert J. Hart, Ernesto Marra |
91 |
|
| TAMU Pump Show |
1998 |
Cavitation Effects on Pump Thrust Leading to Bearing Failures |
E.V. Wilkinson, Robert R. Ross, Ron L. Edmisten |
85 |
|
| TAMU Pump Show |
1998 |
Experience in the Use of Flexure Pivot Tilt Pad Bearings In Boiler Feed Water Pumps |
W.E. Kepple, Dave W. Read, Fouad Y. Zeidan, Christian Paraskevakos, Matthew P. Dawson |
77 |
|
| TAMU Pump Show |
1998 |
A New Method for Secondary Containment of Emissions from Primary Seals |
Allan Mathis, Joseph L. Melancon, Fred Trackwell |
69 |
|
| TAMU Pump Show |
1998 |
The Use of Wavy Face Technology in Various Gas Seal Applications |
Lionel A. Young, Michael B. Huebner |
61 |
|
| TAMU Pump Show |
1998 |
An Innovative Upgrade and Performance Rerate Of Large, High Speed, High Temperature, Multistage Barrel Pumps |
Jan J. Verhoeven, David Redpath, Angus F. Kerr |
51 |
|
| TAMU Pump Show |
1998 |
Hydraulically Rerating Centrifugal Pumps to Improve Reliability |
Robert X. Perez, Claude Knight, Jr. |
41 |
|
| TAMU Pump Show |
1998 |
Pump Reliability Improvements Through Effective Seals and Coupling Management |
Neil M. Wallace, T. John David |
27 |
|
| TAMU Pump Show |
1998 |
Effects of Entrained Air, Npsh Margin, and Suction Piping On Cavitation in Centrifugal Pumps |
Allan R. Budris, Philip A. Mayleben |
99 |
|
| TAMU Pump Show |
1998 |
Analyzing Unacceptable Seal Performance |
Patrick M. Flach, Mark J. Murphy, William I. Anderson |
21 |
|
| TAMU Pump Show |
1999 |
Low Cost Reliability Through Operator Involvement |
Mark Parris, Dan Cameron |
107 |
|
| TAMU Pump Show |
1999 |
Pump Reliability and Efficiency Increase Maintenance Program—Utilizing High Performance Thermoplastics |
Tommy Hinkel, Matt Giffrow |
115 |
|
| TAMU Pump Show |
1999 |
Vane Pass Vibration—Source, Assessment, and Correction—A Practical Guide for Centrifugal Pumps |
Fred L. Robinett, Johann F. Gülich, Thomas Kaiser |
121 |
|
| TAMU Pump Show |
1999 |
Pressurized Lube Oil Systems |
Vinod Patel, Don Coppins |
139 |
|
| TAMU Pump Show |
1999 |
How to Extend the Life of Your Boiler Feed Pump |
Joseph A. Silvaggio, Jr., Gary Krafft |
153 |
|
| TAMU Pump Show |
1999 |
The New Hydraulic Institute Pump Intake Design Standard |
Jack Claxton, George E. Hecker, Arnold Sdano |
161 |
|
| TAMU Pump Show |
1999 |
Component Balance for Centrifugal Pumps—Effects of Product Design, Balance Machine Tooling, and the Balancing Process on Balancing Repeatability |
Mark A. Harris, Douglas Paddock, Joseph O. Voelkel, Kenneth D. Szymanski |
185 |
|
| TAMU Pump Show |
1999 |
Double Gas Seal with Coplanar Coaxial Rayleigh Pad Faces for Pump Sealing Application |
Alan O. Lebeck, Gabriel Albor |
69 |
|
| TAMU Pump Show |
1999 |
How to Justify Machinery Improvements Using Reliability Engineering Principles |
H. Paul Barringer, Todd R. Monroe |
171 |
|
| TAMU Pump Show |
1999 |
Development of a Twin Hybrid Noncontacting Gas Seal and Its Application to Process Pumps |
Shifeng Wu, Christopher A. Kowalski, Lynn E. Stafford |
59 |
|
| TAMU Pump Show |
1999 |
Case Study—Increasing the System Flow in an Existing Sump |
D. Waylon Free, Blake P. Tullis, James R. Bird |
49 |
|
| TAMU Pump Show |
1999 |
Finite Element Transient Thermal Analysis of an Axially Split Horizontal Multistage Pump |
Roland Kaiser, Wolfram Lienau, Douglas J. Peters |
35 |
|
| TAMU Pump Show |
1999 |
A Cavitation Resistant Hydrostatic Seal for High Pressure Breakdown |
Warren C. Prouty, Derek S. Da Silva, Harry Farrell |
25 |
|
| TAMU Pump Show |
1999 |
High Pressure Noncontacting Mechanical Seal for API Applications |
Gregory E. Klostermann |
17 |
|
| TAMU Pump Show |
1999 |
Finding and Eliminating Chronic Pump Failures |
Clay Crook |
9 |
|
| TAMU Pump Show |
1999 |
A Case History—Improvements to an Existing Cooling Tower Sump and Horizontal Split Case Pumps |
Paul J. Wallen and Gregory S. Towsley |
1 |
|
| TAMU Pump Show |
1999 |
Guidelines to Maximize Reliability and Minimize Risk in Plants Using High Pressure Process Diaphragm Pumps |
Eberhard Schlücker, James M. Blanding, Joseph F. Murray |
77 |
|
| TAMU Pump Show |
1999 |
Design and Operation of a Nonpressurized Dual Gas Seal in Light Hydrocarbons |
Mark Cooper, Joseph C. Parker |
101 |
|
| TAMU Pump Show |
2001 |
Principles and Application of a Diagnostic System for Mechanical Seals |
Cord Schmidthals, Stephan F. Greitzke |
77 |
Failure Analysis; Inspection and Quality Control; Maintenance; Mechanical Seals |
| TAMU Pump Show |
2001 |
Pumps—2000 and Beyond |
Paul Cooper |
83 |
Pump 17 Welcome Address |
| TAMU Pump Show |
2001 |
Selection of API 614, Fourth Edition, Chapter 3, General Purpose Lube Oil System Components for Rotating Process Equipment |
Vinod P. Patel, Donald G. Coppins |
89 |
Maintenance |
| TAMU Pump Show |
2001 |
Tutorial on Cryogenic Submerged Electric Motor Pumps |
Steve Rush, Lonn Hall |
101 |
Sealless Pumps |
| TAMU Pump Show |
2001 |
Pump Rerates—When and How |
James T. McGuire |
147 |
Maintenance |
| TAMU Pump Show |
2001 |
Best Practices in Selecting and Applying Positive Displacement Pumps |
John E. Petersen |
109 |
Positive Displacement Pumps |
| TAMU Pump Show |
2001 |
Seal Reliability and Performance Improvements in a Large, High Pressure, High Temperature Barrel Pump |
Ed Wilcox |
17 |
Mechanical Seals; Performance; Rotordynamics; Vibration |
| TAMU Pump Show |
2001 |
Toward Reduced Pump Operating Costs, Part Two—Avoiding Premature Failures |
James P. Netzel, David Redpath, Neil M. Wallace |
135 |
Failure Analysis; Mechanical Seals; Performance |
| TAMU Pump Show |
2001 |
Centrifugal Pump Mechanical Design, Analysis, and Testing |
Greg Case, William D. Marscher |
119 |
Vibration; Specification and Selection |
| TAMU Pump Show |
2001 |
Developing Fixed-Fee Seal Agreements to Improve Pump Reliability |
Marc L. Fontaine, Eileen Haflich |
31 |
Failure Analysis; Maintenance; Mechanical Seals |
| TAMU Pump Show |
2001 |
Development of a Smart Pumping System |
Anthony E. Stavale, Jerome A. Lorenc, Eugene P. Sabini |
67 |
Expert Systems; Model Testing: Instability Performance Curves; Specification and Selection; Variable Speed Drives |
| TAMU Pump Show |
2001 |
Reducing Life-Cycle Costs for Pumps Handling Cryogenic Fluids |
James P. Netzel, Joachim Voigt |
1 |
Mechanical Seals; Mechanical Seals/Design |
| TAMU Pump Show |
2001 |
Nuclear Waste Transfer Pump—Design, Analysis, Testing, and Operation |
Richard F. Guardiani, F. Marshall Hauck, Stephen D. Riesenweber |
5 |
Nuclear Pumps; Sealless Pumps; Slurry Pumps |
| TAMU Pump Show |
2001 |
Improving the Reliability and Performance of a Melt Pump Application in a Petrochemical Plant with Block Style Universal Joints |
Andrew Hudson, Matthew A. McGinnity, Parthiv R. Amin |
27 |
Turbines |
| TAMU Pump Show |
2001 |
Mass Customized Design and Manufacturing System of Advanced Hydraulic Parts |
Hiroyki Kato, Akira Goto, Hirokazu Takayama, Sumio Saito, Takashi Enomoto, Shiro Nabe |
43 |
Efficiency; General Subjects; Model Testing; Performance |
| TAMU Pump Show |
2001 |
Rotordynamic Integrity of a New Machine—A Vertical Hydraulic Turbine in Cryogenic Fluids, The |
G.L.G.M. Habets, Anthony J. Smalley |
51 |
Vertical Pumps; Rotordynamics; Turbines; Variable Speed Drives |
| TAMU Pump Show |
2001 |
Numerical Prediction of Cavitation in Pumps |
Philippe Dupont |
59 |
Cavitation; NPSH |
| TAMU Pump Show |
2002 |
Avoiding Failures in Centrifugal Pumps |
William D. Marscher |
157 |
|
| TAMU Pump Show |
2002 |
Numerical Simulation of BPF Pressure Pulsation Field in Centrifugal Pumps |
Serguei Timouchev, Jean Tourret |
85 |
|
| TAMU Pump Show |
2002 |
Toward Reduced Pump Operating Costs, Part 3 - Minimizing the Effects of Wear and Optimizing Pump Efficiency |
James P. Netzel, Eugene P.Sabini |
145 |
|
| TAMU Pump Show |
2002 |
Pumps and Their SystemsCA Changing Industry |
Robert J. Hart |
141 |
|
| TAMU Pump Show |
2002 |
Prefilled Equipment BaseplatesCHow to Get a Superior Equipment Installation for Less Money |
Todd R. Monroe, Kermit L. Palmer |
131 |
|
| TAMU Pump Show |
2002 |
Infinite Dry-Running and Solids-Handling via Combining Mag-Drive and Gas Seal Technology |
Lev Nelik, Chris L. Miller, Dave McGinty |
121 |
|
| TAMU Pump Show |
2002 |
Practical Use of Rotordynamic Analysis to Correct a Vertical Long Shaft Pump=s Whirl Problem |
Mark A. Corbo, David B. Stefanko, Robert A. Leishear |
107 |
|
| TAMU Pump Show |
2002 |
API 610 Ninth Edition Highlights |
Jack D. Sanders, Roger L. Jones, Charles C. Heald |
177 |
|
| TAMU Pump Show |
2002 |
Next Generation Pump Systems Enable New Opportunities for Asset Management and Economic Optimization |
Fred M. Discenzo, Dennis Rusnak, Lloyd Hanson, Dukki Chung, Joseph Zevchek |
9 |
|
| TAMU Pump Show |
2002 |
Advances in Mechanical SealingCAn Introduction to API 682 Second Edition |
Michael B. Huebner, Joseph M. Thorp, Gordon S. Buck, Cesar L. Fernandez |
59 |
|
| TAMU Pump Show |
2002 |
Operation and Current Developments of Self-Contained, Self-Lubricating Thrust and Journal Bearings Systems |
Matthew M. Marchione |
43 |
|
| TAMU Pump Show |
2002 |
Best Practices in the Application and Maintenance of Oil Sump Lubrication of Horizontal Process Pumps |
Brad Rake, Ray Terrell |
33 |
|
| TAMU Pump Show |
2002 |
Developments in Sealing Technology within Multiphase Pumping |
John G. Evans, Sido Janssen |
25 |
|
| TAMU Pump Show |
2002 |
The Use of Asbestos-Free Materials in Static Sealing on Pumps |
Anthony R. Currie |
17 |
|
| TAMU Pump Show |
2002 |
Optimizing Pumping Systems to Minimize First or Life-Cycle Cost |
Judy Hodgson, Trey Walters |
1 |
|
| TAMU Pump Show |
2002 |
Containment Seals for API 682 Second Edition |
Peter E. Bowden, Chris J. Fone |
67 |
|
| TAMU Pump Show |
2002 |
Mixer Mechanical Design - Fluid Forces |
Ronald J. Weetman, Bernd Gigas |
203 |
|
| TAMU Pump Show |
2003 |
Design Consideration for a Large Mixer Used in an Agitated Column Application |
Andrew J. Creathorn |
83 |
|
| TAMU Pump Show |
2003 |
Application of Monte Carlo Simulations to System Reliability Analysis |
Dennis C. Alexander |
91 |
|
| TAMU Pump Show |
2003 |
The Fundamentals of AC Electric Induction Motor Design and Application |
Edward J. Thornton, J. Kirk Armintor |
95 |
|
| TAMU Pump Show |
2003 |
Selecting Steam Turbines for Pump Drives |
Mike Cerce, Vinod Patel |
107 |
|
| TAMU Pump Show |
2003 |
API 685 Tutorial |
Shawn L. Bennett, Jim Bryant |
125 |
|
| TAMU Pump Show |
2003 |
Seismic Analysis on Modified Service Water Pumps |
Karl Pottie, Angel Bayón, Carlos Rebollo, Manuel Ruiz de Lope, Miguel Mota |
57 |
|
| TAMU Pump Show |
2003 |
Review of API 682, Second Edition |
Mike Huebner |
117 |
|
| TAMU Pump Show |
2003 |
First Operating Experiences with the Integration of Split Sealing Constraints to a Gas Seal Challenge |
Henri V. Azibert, Shifeng Wu |
67 |
|
| TAMU Pump Show |
2003 |
Cavitation Study in a High Pressure Water Injection Pump |
Erik Torbergsen, Sigve Gjerstad, Andreas Hosøy, Brian Aasland |
49 |
|
| TAMU Pump Show |
2003 |
Developments in High Performance Seal Designs for Critical High Pressure Offshore and Pipeline Applications |
John L. Morton, John G. Evans |
39 |
|
| TAMU Pump Show |
2003 |
Use of Noncontacting Seals in Volatile Services |
Bob Goodenberger, Douglas E. Barron, Jason Marquardt |
33 |
|
| TAMU Pump Show |
2003 |
Understanding the Performance of a Progressive Cavity Pump with Metallic Stator |
Jose Gamboa, Aurelio Olivet, Juan Carlos Iglesias, Pedro Gonzalez |
19 |
|
| TAMU Pump Show |
2003 |
Thunder Horse Injection Pump |
Paul Meuter, Wolfram Lienau, Thomas Felix, Andreas Schachenmann, Brian Germaine, Charles L. McDonald |
1 |
|
| TAMU Pump Show |
2003 |
Advanced Gas Sealing Systems for Hydrofluoric Acid Alkylation and Other Extremely Hazardous Duties |
Dan Kozlowski, Ebrahim Jahromi, Jim Wasser |
75 |
|
| TAMU Pump Show |
2004 |
GROUTING OF SMALL PUMP BASEPLATES? IS IT WORTH IT? |
Roger L. Jones, Chuck Lickteig, Jean J. Zoppe |
95 |
|
| TAMU Pump Show |
2004 |
OVERVIEW OF API 682 AND ISO 21049 |
Michael Huebner |
131 |
|
| TAMU Pump Show |
2004 |
SEALING SYSTEMS FOR WATER PUMPS |
Alan Evans |
130 |
|
| TAMU Pump Show |
2004 |
ABNORMAL VERTICAL PUMP SUCTION RECIRCULATION PROBLEMS DUE TO PUMP-SYSTEM INTERACTION |
Bruno Schiavello, Donald R. Smith, Stephen M. Price |
18 |
|
| TAMU Pump Show |
2004 |
DESIGN CONSIDERATIONS FOR NONCLOG PUMPS |
Richard J. Cronin, David A.House, Alan C. Miller |
116 |
|
| TAMU Pump Show |
2004 |
INTRODUCTION TO SEALING MIXERS IN THE PHARMACEUTICAL AND BIOTECH INDUSTRIES |
Robert A. Smith |
138 |
|
| TAMU Pump Show |
2004 |
DEMONSTRATION OF CAVITATION LIFE EXTENSION FOR SUCTION-STAGE IMPELLERS IN HIGH ENERGY PUMPS |
Donald P. Sloteman, Douglas A. Robertson, Leo Margolin |
103 |
|
| TAMU Pump Show |
2004 |
MECHANICAL SEALS WITH WAVY SIC FACES FOR A SEVERE DUTY NGL/CRUDE PIPELINE APPLICATION |
Bill Key, Ralph Dickau, Bob Carlson |
77 |
|
| TAMU Pump Show |
2004 |
ENHANCED MULTIPHASE FLOW PREDICTIONS IN TWIN-SCREW PUMPS |
Allan J. Prang, Paul Cooper |
69 |
|
| TAMU Pump Show |
2004 |
SELECTION OF LARGE WATER TRANSPORT PUMPS AND FIELD EXPERIENCES |
Walter Bolliger, Erwin Leibundgut |
48 |
|
| TAMU Pump Show |
2004 |
CENTRIFUGAL PUMPS IN HEATED BITUMEN PIPELINE SERVICE |
Ralph Dickau, Carlos Pardo |
10 |
|
| TAMU Pump Show |
2004 |
PUMPING OIL SAND FROTH |
Baha Abulnaga |
1 |
|
| TAMU Pump Show |
2004 |
DETERMINING THE CAUSE OF BEARING FAILURES IN CIRCULATING WATER PUMP MOTORS |
Julia Postill, Malcolm E. Leader, Ray D. Kelm, Chesley Brown |
62 |
|
| TAMU Pump Show |
2004 |
MULTISTAGE PUMP EFFICIENCY GAINS THROUGH THE ELIMINATION OF THE SEAL CHAMBER PRESSURE EQUALIZATION LINE |
Trey Maxwell, John Griffith |
88 |
|
| TAMU Pump Show |
2005 |
IMPROVEMENTS IN BEARING LIFE USING NEW SEALING TECHNOLOGY |
Chris Rehmann |
103 |
Lecture |
| TAMU Pump Show |
2005 |
PROCESSES AND PUMP SERVICES IN THE LNG INDUSTRY |
David A. Coyle, Vinod Patel |
179 |
Tutorial |
| TAMU Pump Show |
2005 |
PRACTICAL DESIGN AGAINST PUMP PULSATIONS |
Mark. A Corbo, Charles F. Stearns |
137 |
Tutorial |
| TAMU Pump Show |
2005 |
BASIC PUMP ROTORDYNAMIC ANALYSIS AND SPECIFICATIONS |
William D. Marscher |
136 |
Tutorial |
| TAMU Pump Show |
2005 |
MATERIAL SELECTION FOR MECHANICAL SEALS |
Michael Huebner |
127 |
Tutorial |
| TAMU Pump Show |
2005 |
USE OF INDUCERS IN LIQUIFIED PETROLEUM GAS AND CONDENSATE SERVICE FOR BETTER PERFORMANCE |
Trinath Sahoo |
112 |
SPECIAL PAPER |
| TAMU Pump Show |
2005 |
CENTRIFUGAL PUMP COOLING AND LUBRICANT APPLICATION—A “BEST TECHNOLOGY” UPDATE |
Heinz P. Bloch |
92 |
Lecture |
| TAMU Pump Show |
2005 |
OPTIMIZING THE ASSET MANAGEMENT OF PUMPS THROUGH INTEGRATED ONLINE MONITORING |
Deane Horn, Mark Granger |
85 |
Lecture |
| TAMU Pump Show |
2005 |
IMPELLER RERATE TO REDUCE HYDRAULICALLY GENERATED VIBRATION |
Gary Dyson |
10 |
Lecture |
| TAMU Pump Show |
2005 |
A NEW CONCEPT IN MECHANICAL SEAL COOLING—THE INTEGRAL HEAT SINK |
Lyndon Scott Stephens, Matthew A. Hayden, Daryl S. Schneider |
117 |
SPECIAL PAPER |
| TAMU Pump Show |
2005 |
ACTIVE LIFT SEAL TECHNOLOGY IMPACTED ON WATER INJECTION SERVICES |
John L. Morton, Joe Attard, John G. Evans |
77 |
Lecture |
| TAMU Pump Show |
2005 |
IDENTIFICATION OF BEARING HOUSING VIBRATIONS OF A LARGE BARREL TYPE INJECTION PUMP AND THEIR ANALYSIS BY MEANS OF THE FINITE ELEMENT METHOD |
Wolfram Lienau, Peter Sandford, Yasar Deger |
1 |
Lecture |
| TAMU Pump Show |
2005 |
DESIGNING AN ULTRA-LOW SPECIFIC SPEED CENTRIFUGAL PUMP |
Hiroshi Satoh, Kazuo Uchida, Yinchun Cao |
16 |
Lecture |
| TAMU Pump Show |
2005 |
A NEW UNIQUE HIGH PRESSURE PUMP SYSTEM |
Thomas L. Angle, James G. Shaw, Steve Cummins, Mike Turner |
22 |
Lecture |
| TAMU Pump Show |
2005 |
HARMONIC FREE MAGNETIC (FCMA) SOFT STARTERS FOR LARGE CAPACITY HIGH VOLTAGE INDUCTION AND SYNCHRONOUS MOTORS DRIVING PUMPS AND COMPRESSORS |
Prafulla Deo, Mohan N. Gowaikar |
34 |
Lecture |
| TAMU Pump Show |
2005 |
UPTHRUST PROBLEMS ON MULTISTAGE VERTICAL TURBINE PUMPS |
Donald R. Smith, Stephen Price |
46 |
Lecture |
| TAMU Pump Show |
2005 |
A VERY HIGH HEAD PUMP |
J.T. McGuire, Vahe Hayrepetian |
58 |
Lecture |
| TAMU Pump Show |
2005 |
DESIGN AND DEVELOPMENT OF ELECTRIC SUBMERSIBLE PUMPS FOR LARGE CAPACITIES |
Andreas Hosøy, Sigve Gjerstad, Jostein Smaamo, Erik Torbergsen |
69 |
Lecture |
| TAMU Pump Show |
2007 |
EFFECTIVE ISOLATION TREATMENT OF VERTICAL PUMPS INCLUDING SEISMIC RESTRAINTS |
Lyn Greenhill, Valerie Lease |
7 |
LECTURES |
| TAMU Pump Show |
2007 |
ESTABLISHING AN ELECTRIC MOTOR LUBRICATION PROGRAM |
Marianne Duncanson |
53 |
TUTORIALS |
| TAMU Pump Show |
2007 |
MULTIPHASE PUMPS |
Bob Heyl |
85 |
TUTORIALS |
| TAMU Pump Show |
2007 |
AN ENDUSER’S GUIDE TO CENTRIFUGAL PUMP ROTORDYNAMICS |
William D. Marscher |
69 |
TUTORIALS |
| TAMU Pump Show |
2007 |
PUMP CAVITATION— VARIOUS NPSHR CRITERIA, NPSHA MARGINS, IMPELLER LIFE EXPECTANCY |
Bruno Schiavello, Frank C. Visser |
67 |
TUTORIALS |
| TAMU Pump Show |
2007 |
ELECTRONIC DATA EXCHANGE IN THE PUMP INDUSTRY |
Kenneth Burkhardt, Trygve Dahl, Mark E. Palmer |
55 |
TUTORIALS |
| TAMU Pump Show |
2007 |
UPDATES IN PROGRESS FOR ISO 13709/API 610, CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES |
Roger Jones |
97 |
TUTORIALS |
| TAMU Pump Show |
2007 |
GUIDELINES FOR APPLICATION OF HIGH TEMPERATURE DUAL SEALS |
Gordon Buck |
51 |
TUTORIALS |
| TAMU Pump Show |
2007 |
VIBRATION FIELD PROBLEM RESOLVED WITH ANALYTICAL DIAGNOSTIC APPROACH AND INNOVATIVE IMPELLER DESIGN |
Bruno Schiavello, Giancarlo Cicatelli |
39 |
LECTURES |
| TAMU Pump Show |
2007 |
CAVITATION IN HIGH ENERGY PUMPS— DETECTION AND ASSESSMENT OF DAMAGE POTENTIAL |
Donald P. Sloteman |
29 |
LECTURES |
| TAMU Pump Show |
2007 |
DRIVING PUMP RELIABILITY FORWARD WITH ADVANCED COMPOSITE WEAR RINGS |
Robert Aronen, Brian Boulden, Martin Russek |
15 |
LECTURES |
| TAMU Pump Show |
2007 |
RELIABILITY IMPROVEMENTS TO A HIGH SPEED/HIGH ENERGY PUMP |
Ed Wilcox |
1 |
LECTURES |
| TAMU Pump Show |
2007 |
ROAD TO RELIABLE PUMPS |
Todd Monroe, Perry Monroe |
99 |
TUTORIALS |
| TAMU Pump Show |
2007 |
NUMERICAL SIMULATION ON A PUMP OPERATING IN A TURBINE MODE |
Sonia Rawal, J.T. Kshirsagar |
21 |
LECTURES |