| Turbo Show Papers |
| Conference |
Year |
Paper Title |
Paper Author |
Page Number |
Other |
| TAMU Turbo Show |
1972 |
Turbomachinery Analysis and Protection |
John S. Sohre |
1 |
Diagnostics |
| TAMU Turbo Show |
1972 |
Centrifugal Compressor Operation and Maintenance |
Hugh M. Davis |
10 |
Centrifugal Compressors |
| TAMU Turbo Show |
1972 |
Commissioning a Gas Turbine Compressor or Single Lift Package for Offshore Gas Reinjection Application |
Ramana Reddy |
26 |
Centrifugal Compressors; Gas Turbines |
| TAMU Turbo Show |
1972 |
Fluid Film Bearing Design Considerations |
Stanley Abramovitz |
39 |
Bearings |
| TAMU Turbo Show |
1972 |
High Speed Journal and Thrust Bearing Design |
Bernard S. Herbage |
56 |
Bearings |
| TAMU Turbo Show |
1972 |
Selection and Application of High Speed Gear Drives |
John M. Phinney |
62 |
Gears |
| TAMU Turbo Show |
1972 |
Fundamentals of Lubrication Relating to Operation and Maintenance of Turbomachinery |
Allen M. Clapp |
67 |
Lubrication Systems |
| TAMU Turbo Show |
1972 |
Turbomachinery Specifications |
John G. Housman |
75 |
Specifications |
| TAMU Turbo Show |
1972 |
New Developments in Compressor Aerodynamics |
Meherwan P. Boyce |
79 |
Centrifugal Compressors |
| TAMU Turbo Show |
1972 |
Aerodynamics of Turbines |
William E. Thompson |
90 |
Turbo Expanders |
| TAMU Turbo Show |
1972 |
New Technology in Turbine Aerodynamics |
Arthur J. Glassman, Thomas P. Moffitt |
105 |
Gas Turbines |
| TAMU Turbo Show |
1972 |
Rotor-Bearing Stability |
Edgar J. Gunter, Jr. |
119 |
Bearings; Rotordynamics |
| TAMU Turbo Show |
1972 |
Rotor Design and Vibration Response |
Firm L. Weaver |
142 |
Rotordynamics |
| TAMU Turbo Show |
1972 |
Present Instrumentation and Future Trends in Real Time Analysis Equipment |
Ira M. Langenthal, Frank Kasper, Jr. |
148 |
Condition Monitoring |
| TAMU Turbo Show |
1972 |
Application of Spectrum Analysis to Onstream Condition Monitoring and Malfunction Diagnosis of Process Machinery |
Jan S. Borhaug, John S. Mitchell |
150 |
Condition Monitoring |
| TAMU Turbo Show |
1972 |
Oil Systems—Design for Reliability |
Michael D Innocenzio |
163 |
Lubrication Systems |
| TAMU Turbo Show |
1972 |
Turbomachinery Operation and Maintenance |
Charles J. B. Mitchell |
168 |
Condition Monitoring |
| TAMU Turbo Show |
1973 |
Cold and Hot Alignment Techniques of Turbomachinery |
Charles Jackson |
1 |
Alignment |
| TAMU Turbo Show |
1973 |
Optical Alignment of Turbomachinery |
A. J. Campbell |
8 |
Alignment |
| TAMU Turbo Show |
1973 |
Industrial Applications of Aircraft-Derivative Gas Turbines |
Robert Harnsberger |
13 |
Gas Turbines |
| TAMU Turbo Show |
1973 |
Conversion of a Single-Shaft Turboprop Engine to a Two-Shaft Industrial Turbine |
John D. Horth |
20 |
Gas Turbines |
| TAMU Turbo Show |
1973 |
Critical Areas in Centrifugal Compressors |
Paul Lewis |
29 |
Centrifugal Compressors |
| TAMU Turbo Show |
1973 |
Case Histories of Specialized Turbomachinery Problems |
J. C. Wachel, Walter VonNimitz, Fred R. Szenasi |
33 |
Condition Monitoring |
| TAMU Turbo Show |
1973 |
Repair Techniques for Rotor and Case Damage |
Harry E. Erb |
51 |
Maintenance |
| TAMU Turbo Show |
1973 |
Maintenance Techniques for Turbomachinery |
William E. Nelson |
65 |
Maintenance |
| TAMU Turbo Show |
1973 |
Developments in Multiple Fuel Applications for Gas Turbines |
James G. Kiernan |
70 |
Gas Turbines |
| TAMU Turbo Show |
1973 |
Corrosion Problems in Turbines |
Mauricio Casanova |
83 |
Corrosion; Gas Turbines |
| TAMU Turbo Show |
1973 |
On-Stream Cleaning of Turbomachinery |
Brian Turner |
91 |
Operation |
| TAMU Turbo Show |
1973 |
Application of Screw Compressors for Processes in the Chemical and Petrochemical Industries, The |
Helmut Kammerer |
94 |
Screw Compressors |
| TAMU Turbo Show |
1973 |
New Coupling Applications or Application of New Coupling Designs |
Ken Kraemer |
103 |
Couplings |
| TAMU Turbo Show |
1973 |
Some Metallurgical Considerations in Centrifugal Compressors |
Joseph A. Cameron, Frank M. Danowski, Jr. |
116 |
Centrifugal Compressors; Materials |
| TAMU Turbo Show |
1973 |
Real Time Spectral Analysis—Taking the Mystique Out of This Valuable Maintenance Tool |
Jon E. Palm |
129 |
Condition Monitoring |
| TAMU Turbo Show |
1973 |
Compressor Performance, Field Data Acquisition and Evaluation |
Hugh M. Davis |
143 |
Centrifugal Compressors |
| TAMU Turbo Show |
1974 |
Power Recovery Systems and Hot Gas Expanders |
John P. Balfoort |
1 |
Turboexpanders |
| TAMU Turbo Show |
1974 |
Large Power-Output Radial Inflow Turbine, The |
Hans D. Linhardt |
8 |
Turboexpanders |
| TAMU Turbo Show |
1974 |
What is Optical Alignment? |
John W. Mitchell |
17 |
Alignment |
| TAMU Turbo Show |
1974 |
Field Measurements of Blade Stresses on Industrial Turbomachines |
R. A. Strub |
23 |
Axial Compressor |
| TAMU Turbo Show |
1974 |
Gas Turbines—High Efficiency Combined with Ease of Maintenance |
George T. Barker |
35 |
Gas Turbines |
| TAMU Turbo Show |
1974 |
Borescope Techniques Applied to Maintenance Practices on Marine Heavy-Duty Gas Turbines |
Samoil Moise |
46 |
Borescopes; I nspection; Gas Turbines |
| TAMU Turbo Show |
1974 |
Installation and Application of Sensors for Turbomachinery Monitoring, The |
George P. Schanzenbach |
55 |
Condition Monitoring |
| TAMU Turbo Show |
1974 |
Industrial Gas Turbine Performance Measurement |
J. T. Purvis |
59 |
Gas Turbines |
| TAMU Turbo Show |
1974 |
Special Purpose Gearing—A User s Approach to Sound Application Engineering |
J. Hans Arndt |
67 |
Gears |
| TAMU Turbo Show |
1974 |
Electric Motors for Centrifugal Compressor Drives |
Jesse C. Moore |
74 |
Electric Motors |
| TAMU Turbo Show |
1974 |
Field Performance Testing of Centrifugal Compressors |
Roy B. Pais, Gerald J. Jacobik |
84 |
Centrifugal Compressors |
| TAMU Turbo Show |
1974 |
Optimization of Various Gas Turbine Cycles |
Meherwan P. Boyce, Mow-Shung Chen |
91 |
Gas Turbines |
| TAMU Turbo Show |
1975 |
Impact of Recent Tilting Pad Thrust Bearing Tests on Steam Turbine Design and Performance |
Truman L. King, Jr., John W. Capitao |
1 |
Bearings |
| TAMU Turbo Show |
1975 |
Steam Turbine Blade Failures, Causes and Correction |
John S. Sohre |
9 |
Steam Turbines |
| TAMU Turbo Show |
1975 |
Analysis of Three Impeller Failures: Experimental Techniques Used to Establish Causes |
Charles Bultzo |
31 |
Centrifugal Compressors |
| TAMU Turbo Show |
1975 |
Examination of Pump Cavitation, Gear Mesh and Blade Performance Using External Vibration Characteristics |
John S. Mitchell |
39 |
Condition Monitoring |
| TAMU Turbo Show |
1975 |
Low Frequency Vibration at Centrifugal Plants |
Walter W. VonNimitz |
47 |
Condition Monitoring |
| TAMU Turbo Show |
1975 |
Plain Bearing Damage |
J. M. Conway-Jones, Anthony J. Leopard |
55 |
Bearings |
| TAMU Turbo Show |
1975 |
Rotor-Bearing System Design Audit |
Stanley B. Malanoski |
65 |
Bearings; Rotordynamics |
| TAMU Turbo Show |
1975 |
Design and Development of a New 30,000 HP Class Two Shaft Type Gas Turbine |
Arthur W. J. Upton |
71 |
Gas Turbines |
| TAMU Turbo Show |
1975 |
Gas Turbine Operation in Extreme Cold Climate |
R. E. Patton |
83 |
Gas Turbines |
| TAMU Turbo Show |
1975 |
Borescope Color Photography: A New Engineering Technology for Marine Gas Turbine Condition Monitoring |
William J. Ridler |
95 |
Borescopes; Inspection; Gas Turbines |
| TAMU Turbo Show |
1975 |
Forward Subrotative Speed Resonance Action of Rotating Machinery |
Donald E. Bently |
103 |
Condition Monitoring; Rotordynamics |
| TAMU Turbo Show |
1975 |
Operation History of Fractional Frequency Whirl, An |
Kenneth J. Smith |
115 |
Condition Monitoring; Rotordynamics |
| TAMU Turbo Show |
1975 |
Design and Application of Squeeze Film Dampers for Turbomachinery Stabilization |
Edgar J. Gunter, Jr., L. E. Barrett, P. E. Allaire |
127 |
Bearings; Rotordynamics |
| TAMU Turbo Show |
1975 |
High Speed Coupling Failure Analysis |
K. W. Wattner |
143 |
Couplings |
| TAMU Turbo Show |
1975 |
Less Costly Turboequipment Uprates Through Optimized Coupling Selection |
Heinz P. Bloch |
149 |
Couplings |
| TAMU Turbo Show |
1975 |
Fossil Energy: Advanced Power Systems |
Winfred M. Crim, Jr. |
153 |
Energy |
| TAMU Turbo Show |
1976 |
Large High Pressure Centrifugal Compressors for Oxygen Service |
Kenneth W. Geiser |
1 |
Centrifugal Compressors |
| TAMU Turbo Show |
1976 |
Distortion of Speed Changer Housings and Resulting Gear Failures |
Fred L. VanLaningham |
7 |
Gears |
| TAMU Turbo Show |
1976 |
Installation of Large Rotating Equipment Systems—A Contractor s Comments |
John R. Massey |
15 |
Centrifugal Compressors; Gas Turbines |
| TAMU Turbo Show |
1976 |
Site Balancing of a Large Flexible Rotor Containing Unbalance Eccentricity and Permanent Residual Bow |
A. Stewart Maxwell, Alan F. P. Sanderson |
23 |
Balancing |
| TAMU Turbo Show |
1976 |
Advanced Research Programs in Turbomachinery |
Meherwan P. Boyce, William L. Trevillion, Michael L. Brown |
31 |
Centrifugal Compressors; Gas Turbines |
| TAMU Turbo Show |
1976 |
Problems Encountered in Boiler Feed Pump Operation |
Elemer Makay |
45 |
Pumps |
| TAMU Turbo Show |
1976 |
Pulsations in Liquid Pumps and Piping Systems |
Cecil R. Sparks, J. C. Wachel |
55 |
Piping; Pumps |
| TAMU Turbo Show |
1976 |
Turbomachinery Noise Rating |
George M. Diehl |
63 |
Noise |
| TAMU Turbo Show |
1976 |
Reliable Overspeed Protection for Industrial Drive Turbines |
Firm L. Weaver |
71 |
Steam Turbines |
| TAMU Turbo Show |
1976 |
Industrial Steam Turbines Improve Energy Utilization in Thermal Power Plants |
R. Wickl |
79 |
Steam Turbines |
| TAMU Turbo Show |
1976 |
Efficiency in Mechanical Drive Steam Turbines |
John A. Brown |
87 |
Steam Turbines |
| TAMU Turbo Show |
1976 |
Practical Design Solutions for Mechanical Drive Steam Turbines |
Alfred M. Spechtenhauser |
99 |
Steam Turbines |
| TAMU Turbo Show |
1976 |
Coupling Misalignment Forces |
C. B. Gibbons |
111 |
Couplings |
| TAMU Turbo Show |
1976 |
Metal Diaphragm Coupling Performance |
Michael M. Calistrat |
117 |
Couplings |
| TAMU Turbo Show |
1976 |
Axial Vibration Characteristics of Metal-Flexing Couplings |
Fred K. Landon, Louis F. Counter |
125 |
Couplings |
| TAMU Turbo Show |
1976 |
Balancing of Multimass Flexible Rotors |
E. J. Gunter, L. E. Barrett, P. E. Allaire |
133 |
Balancing |
| TAMU Turbo Show |
1976 |
Field Testing of Compressors |
Meherwan P. Boyce, Richard D. Bayley, Vankayalapati Sudhakar, Vijayvardhan Elchuri |
149 |
Centrifugal Compressors; Testing |
| TAMU Turbo Show |
1977 |
Development of Turbomachinery Industry in Japan |
Ichiro Watanabe |
1 |
Centrifugal Compressors; Gas Turbines |
| TAMU Turbo Show |
1977 |
Torsional Vibration of Machine Systems |
Ronald L. Eshleman |
13 |
Condition Monitoring; Rotordynamics |
| TAMU Turbo Show |
1977 |
Machinery Monitoring Update |
V. Ray Dodd |
23 |
Condition Monitoring |
| TAMU Turbo Show |
1977 |
High Efficiency Fluid Film Thrust Bearings for Turbomachinery |
Bernard S. Herbage |
33 |
Bearings |
| TAMU Turbo Show |
1977 |
Dynamic Characteristics of Fluid-Film Bearings |
Wilbur Shapiro, Richard Colsher |
39 |
Bearings; Rotordynamics |
| TAMU Turbo Show |
1977 |
Rejuvenation of Used Turbine Blades by Hot Isostatic Processing |
Gary VanDrunen, Joseph Liburdi |
55 |
Gas Turbines |
| TAMU Turbo Show |
1977 |
Development and Testing of a New High Flow Centrifugal Pipeline Booster |
Robert H. Meier, Robert N. Schiller |
61 |
Centrifugal Compressors |
| TAMU Turbo Show |
1977 |
Compressor Drive Turbines of High Efficiency and Great Operational Safety |
Klaus Körner |
75 |
Steam Turbines |
| TAMU Turbo Show |
1977 |
High-Speed Gear Vibration and Noise Experience |
Norman E. Bruce |
85 |
Gears |
| TAMU Turbo Show |
1977 |
Turbine Rotors Whirl After Dynamically Stable Designs Are Updated |
Fred L. VanLaningham |
91 |
Steam Turbines |
| TAMU Turbo Show |
1977 |
Design of Support Structures for Elevated Centrifugal Machinery, The |
Marvin Lisnitzer, Donald C. Chang, L. William Abel |
99 |
Foundations |
| TAMU Turbo Show |
1977 |
Repair and Rehabilitation of Turbomachinery Foundations |
E. M. Renfro |
107 |
Foundations |
| TAMU Turbo Show |
1977 |
Centrifugal and Axial Flow Fan Applications and Design Criteria |
I. Howitt |
113 |
Fans |
| TAMU Turbo Show |
1977 |
Dynamic Simulation of Centrifugal Compressor Systems |
R. A. Stanley, W. R. Bohannan |
123 |
Centrifugal Compressors |
| TAMU Turbo Show |
1977 |
High Speed Gears—Design and Application |
James R. Partridge |
133 |
Gears |
| TAMU Turbo Show |
1977 |
Evaluation of Liquid Film Seals, Associated Systems and Process Considerations |
Gerald Lesiecki |
145 |
Compressor Seals |
| TAMU Turbo Show |
1977 |
Mechanical Contact Shaft Seal |
Richard A. Lewis |
149 |
Compressor Seals |
| TAMU Turbo Show |
1977 |
Discussion of Turbine and Compressor Sealing Devices and Systems, A |
Robert J. Schmal |
153 |
Compressor Seals |
| TAMU Turbo Show |
1977 |
Mechanical Seal Application—A User s Viewpoint |
John M. Eeds, James H. Ingram, Shannon T. Moses |
171 |
Pump Seals |
| TAMU Turbo Show |
1977 |
Fluid Film Bearings—Fundamentals and Design Criteria and Pitfalls |
Stanley Abramovitz |
189 |
Bearings |
| TAMU Turbo Show |
1977 |
Principles of Fluid Film Bearing Design and Application |
Anthony J. Leopard |
207 |
Bearings |
| TAMU Turbo Show |
1978 |
Planning Turbomachinery Overhauls and Documenting the Results |
John D. Houghton |
1 |
Maintenance |
| TAMU Turbo Show |
1978 |
Electromagnetic Shaft Currents and Demagnetization on Rotors of Turbines and Compressors |
John S. Sohre, Paul I. Nippes |
13 |
Shaft Currents |
| TAMU Turbo Show |
1978 |
State of the Art of High Speed Overhung Centrifugal Compressors for the Process Industry, The |
Hans Pennink |
35 |
Centrifugal Compressors |
| TAMU Turbo Show |
1978 |
Design Automation of Centrifugal Compressors |
Tadashi Kaneki, Eiji Yokoyama |
47 |
Centrifugal Compressors |
| TAMU Turbo Show |
1978 |
High Speed and Large Capacity Compressor-Driving Turbines for Chemical Plants |
Makoto Teramoto, Kazuso Katayama, Masanori Fujimuru |
59 |
Steam Turbines |
| TAMU Turbo Show |
1978 |
Investigation of the Flexural Vibration Behavior of Slender Rotors in Drum-Type Condensing Turbines, An |
Rolf Sparmann |
71 |
Steam Turbines |
| TAMU Turbo Show |
1978 |
Practical Considerations for a Rated Speed Shop Balance |
Edward A. Bulanowski, Jr. |
87 |
Balancing |
| TAMU Turbo Show |
1978 |
Compressor Response to Synchronous Motor Startup |
Gerald K. Mruk |
95 |
Electric Motors |
| TAMU Turbo Show |
1978 |
Subsynchronous Vibration in a Large Water Flood Pump |
James E. Corley |
103 |
Pumps; Rotordynamics; Vibration Monitoring |
| TAMU Turbo Show |
1978 |
Transient Analyses of Synchronous Motor Trains |
Fred R. Szenasi, Walter W. VonNimitz |
111 |
Condition Monitoring; Electric Motors |
| TAMU Turbo Show |
1978 |
Turbomachinery Problems—Lube and Seal System Revisited |
Royce N. Brown |
119 |
Lubrication Systems |
| TAMU Turbo Show |
1978 |
Particular Problems of Steam Turbine Lubrication |
Walter E. Enz, Alfred Häusermann |
125 |
Lubrication Systems |
| TAMU Turbo Show |
1978 |
Role of Hydraulic Balance in Mechanical Pump Seals, The |
Gordon S. Buck, Jr. |
133 |
Pump Seals |
| TAMU Turbo Show |
1978 |
Using Modified Acoustic Emission Techniques for Machinery Condition Surveillance |
Heinz P. Bloch, Robert W. Finley |
139 |
Condition Monitoring |
| TAMU Turbo Show |
1978 |
Improving Cooling Tower Fan System Efficiencies |
Robert C. Monroe |
159 |
Fans |
| TAMU Turbo Show |
1978 |
Operating Characteristics of Gear-Type Couplings, The |
Gerhardt Pahl |
167 |
Couplings |
| TAMU Turbo Show |
1978 |
Plant Lubrication |
Allen M. Clapp |
177 |
Lubrication Systems |
| TAMU Turbo Show |
1978 |
Lubrication Systems for Turbomachinery |
Fredrick B. Wilcox |
189 |
Lubrication Systems |
| TAMU Turbo Show |
1979 |
Fatigue Failures of Compressor Impellers and Resonance Excitation Testing |
Fred L. VanLaningham, Dave E. Wood |
1 |
Centrifugal Compressors |
| TAMU Turbo Show |
1979 |
Maintenance Techniques for Turbomachinery |
William E. Nelson |
11 |
Maintenance |
| TAMU Turbo Show |
1979 |
Review of Design Analysis Methods for a Horizontal End Suction Centrifugal Pump, A |
Robert C. Cherry |
21 |
Pumps |
| TAMU Turbo Show |
1979 |
Effects of Fluid-Filled Clearance Spaces on Centrifugal Pump and Submerged Motor Vibrations |
Henry F. Black |
29 |
Pumps; Rotordynamics |
| TAMU Turbo Show |
1979 |
Design and Full Load Testing of a High Pressure Centrifugal Natural Gas Injection Compressor |
Vijay K. Sood |
35 |
Centrifugal Compressors |
| TAMU Turbo Show |
1979 |
Selection and Design of Tilting Pad and Fixed Lobe Journal Bearings for Optimum Turborotor Dynamics |
John C. Nicholas, R. Gordon Kirk |
43 |
Bearings; Rotordynamics |
| TAMU Turbo Show |
1979 |
New Vibration Criteria for High Speed Large Capacity Turbomachinery, A |
Kazuhiro Shiraki, Hiroshi Kanki |
59 |
Vibration Monitoring |
| TAMU Turbo Show |
1979 |
Centrifugal Compressor Labyrinth Seal Systems |
J. Gerhardt Torborg |
71 |
Compressor Seals |
| TAMU Turbo Show |
1979 |
Couplings—A User s Point of View |
Charles Zirkelback |
77 |
Couplings |
| TAMU Turbo Show |
1979 |
Air Filtration and Sound Control Systems for Gas Turbines—The State of the Art |
Fritz P. Lages III |
83 |
Filtration; Gas Turbines |
| TAMU Turbo Show |
1979 |
Review of the Industrial Development and Usage of Electronic Governors, A |
Peter E. Jenkins |
95 |
Governors |
| TAMU Turbo Show |
1979 |
Mechanical Drive Turbine Control Systems for the 1980s |
Anthony J. Rossi |
109 |
Governors |
| TAMU Turbo Show |
1979 |
Design, Performance and Operational Characteristics of a 6500 Horsepower High Performance Industrial Gas Turbine |
James R. Strother |
121 |
Gas Turbines |
| TAMU Turbo Show |
1979 |
API Organization and Mechanical Equipment Specifications |
John G. Housman |
133 |
Specifications |
| TAMU Turbo Show |
1979 |
Principles of Turbomachinery Bearings |
James D. McHugh |
135 |
Bearings |
| TAMU Turbo Show |
1980 |
Hydraulically Fitted Hubs, Theory and Practice |
Michael M. Calistrat |
1 |
Couplings |
| TAMU Turbo Show |
1980 |
Failure Analysis and Repair Techniques for Turbomachinery Gears |
Thomas C. Glew |
11 |
Gears |
| TAMU Turbo Show |
1980 |
High Speed Balancing Procedures |
Robert Ehrich |
25 |
Balancing |
| TAMU Turbo Show |
1980 |
Unique Fan Vibration Problems: Their Causes and Solutions |
Donald R. Smith, Harold R. Simmons |
33 |
Fans |
| TAMU Turbo Show |
1980 |
Lateral Vibration Reduction in High Pressure Centrifugal Compressors |
Rudolf Jenny, Hans R. Wyssmann |
45 |
Centrifugal Compressors; Rotordynamics |
| TAMU Turbo Show |
1980 |
Analysis of Surge, The |
Ross Sentz |
57 |
Centrifugal Compressors |
| TAMU Turbo Show |
1980 |
Sulfidation and Its Inhibition in Turbomachinery |
M. A. DeCrescente |
63 |
Gas Turbines |
| TAMU Turbo Show |
1980 |
Using a "Soundtube" to Measure Noise of Structural Sources in High Background Noise Environments |
James T. Rainey, Frank Kushner |
69 |
Noise |
| TAMU Turbo Show |
1980 |
Vibration Problems of Large Vertical Pumps and Motors |
James E. Corley |
75 |
Condition Monitoring; Rotordynamics |
| TAMU Turbo Show |
1980 |
Pump Energy Conservation Techniques |
J. Cary Cone |
83 |
Pumps |
| TAMU Turbo Show |
1980 |
Geothermal Power and Problems |
T. E. McIlraith |
105 |
Energy |
| TAMU Turbo Show |
1980 |
Laser—As Used in Alignment, The |
Alastair J. Campbell |
121 |
Alignment |
| TAMU Turbo Show |
1980 |
Total Alignment Can Reduce Maintenance and Increase Reliability |
V. Ray Dodd |
123 |
Alignment |
| TAMU Turbo Show |
1980 |
Benchmark Gauges for Hot Alignment of Turbomachinery |
Jack N. Essinger |
127 |
Alignment |
| TAMU Turbo Show |
1980 |
Instrumental Couplings: The What, the Why and the How of the Indikon Hot-Alignment Measuring System |
Albert E. Finn |
135 |
Alignment |
| TAMU Turbo Show |
1980 |
Alignment Using Water Stands and Eddy Current Proximity Probes |
Charles Jackson |
137 |
Alignment |
| TAMU Turbo Show |
1980 |
Reverse-Indicator Alignment and Related Subjects |
Malcolm G. Murray, Jr. |
145 |
Alignment |
| TAMU Turbo Show |
1980 |
Dynamic Balancing |
Randall L. Fox |
151 |
Balancing |
| TAMU Turbo Show |
1980 |
Establishing Your Own Field Balancing Group |
Kevin Z. Witwer |
187 |
Balancing |
| TAMU Turbo Show |
1981 |
Stall, Stage Stall, and Surge |
David Japikse |
1 |
Centrifugal Compressors |
| TAMU Turbo Show |
1981 |
Measuring the Thermodynamic Performance of Multistage Compressors Operating on Mixed Hydrocarbon Gases |
Nazim S. Nathoo, William G. Gottenberg |
15 |
Centrifugal Compressors |
| TAMU Turbo Show |
1981 |
Design of Journal Bearings for Rotating Machinery |
Paul E. Allaire, Ronald D. Flack |
25 |
Bearings; Rotordynamics |
| TAMU Turbo Show |
1981 |
Field Experience and Solution of a Fractional Frequency Vibration Problem on a High Speed Centrifugal Compressor |
Anthony B. Crease |
47 |
Bearings; Centrifugal Compressors; Rotordynamics |
| TAMU Turbo Show |
1981 |
Four Compressor Trains of a Large Ethylene Plant—Design, Audit, Testing and Commissioning |
Charles Jackson |
55 |
Centrifugal Compressors |
| TAMU Turbo Show |
1981 |
Experimental Investigation of Balancing Flexible Rotors in Large Motors and Generators |
William H. Miller |
73 |
Balancing; Electric Motors |
| TAMU Turbo Show |
1981 |
Large Adjustable Speed Drives and Their Application to a High Speed Centrifugal Compressor |
Charles P. LeMone |
81 |
Electric Motors |
| TAMU Turbo Show |
1981 |
Frequency Convertors for Starting and Speed Regulations of AC Motors for Turbomachine Applications |
Kjell Frank |
87 |
Electric Motors |
| TAMU Turbo Show |
1981 |
Flow Recirculation in Centrifugal Pumps |
Warren H. Fraser |
95 |
Pumps |
| TAMU Turbo Show |
1981 |
Realistic Design Specifications Increase Pump Reliability |
Thomas R. Morton, Gary L. Olin |
101 |
Pumps |
| TAMU Turbo Show |
1981 |
Practical Guide to In-Place Balancing |
Randall L. Fox |
113 |
Balancing |
| TAMU Turbo Show |
1981 |
How to Install Maintainable Bearing Temperature Sensors |
Howard Maxwell |
131 |
Bearings |
| TAMU Turbo Show |
1981 |
Improved Method for Calculating Critical Speeds and Rotordynamic Stability of Turbomachinery |
Brian T. Murphy, John M. Vance |
141 |
Rotordynamics |
| TAMU Turbo Show |
1981 |
Measure Power by the Simplest Method and Use for Onstream Computer Monitoring |
William A. Clark |
151 |
Condition Monitoring |
| TAMU Turbo Show |
1981 |
Aspects of Field Performance Testing, Some |
William G. Gottenberg |
155 |
Condition Monitoring |
| TAMU Turbo Show |
1981 |
Field Testing of Centrifugal Compressors |
James W. Hunt |
157 |
Condition Monitoring |
| TAMU Turbo Show |
1981 |
Field Performance Testing to Improve Compressor Reliability |
Terryl Matthews |
165 |
Condition Monitoring |
| TAMU Turbo Show |
1981 |
Guidelines for Performance Testing Centrifugal Compressor |
Fred L. VanLaningham |
169 |
Condition Monitoring |
| TAMU Turbo Show |
1981 |
API 671—Couplings—What is the Impact on the User? |
Royce N. Brown |
175 |
Coupings |
| TAMU Turbo Show |
1981 |
Magnetism in Turbomachinery |
Paul I. Nippes |
183 |
Shaft Currents |
| TAMU Turbo Show |
1981 |
Electromagnetic Shaft Current Problems—A Users Viewpoint |
Bernard W. Sandner |
191 |
Shaft Currents |
| TAMU Turbo Show |
1981 |
Electromagnetic Shaft Current Control |
John S. Sohre |
199 |
Shaft Currents |
| TAMU Turbo Show |
1981 |
Electromagnetic Shaft Currents in Ammonia Plant—Turbomachinery at CF Industries, Inc. |
Lester E. Sutherland |
201 |
Shaft Currents |
| TAMU Turbo Show |
1982 |
Application of Recent Rotor Dynamics Developments to Mechanical Drive Turbines |
William J. Caruso, Bruce E. Gans, William G. Catlow |
1 |
Rotordynamics |
| TAMU Turbo Show |
1982 |
Rotor Dynamics Analysis and Bearing Optimization Study of a 3,800 HP Steam Turbine |
Dana J. Salamone |
19 |
Rotordynamics |
| TAMU Turbo Show |
1982 |
Steam Turbine Blade Options: How to Specify or Upgrade |
Helmut G. Naumann |
29 |
Steam Turbines |
| TAMU Turbo Show |
1982 |
Performance Improvement of Mechanical Drive Steam Turbines |
Hisakuni Takenaga, Kazuso Katayama, Kazuo Iida |
51 |
Steam Turbines |
| TAMU Turbo Show |
1982 |
Abradable Seals in Turbomachinery |
William G. Hoppock, Joseph A. Silvaggio, Jr., Kenneth G. Van Bramer |
61 |
Compressor Seals |
| TAMU Turbo Show |
1982 |
New Developments in Centrifugal Compressors |
John D. Halloran |
69 |
Centrifugal Compressors |
| TAMU Turbo Show |
1982 |
Aerothermal-Mechanical Health Monitoring and Diagnostics of Turbo-Compressor Sets |
Meherwan P. Boyce, Cyrus B. Meher-Homji |
75 |
Condition Monitoring |
| TAMU Turbo Show |
1982 |
Residual Oil Burning Experience at the Putman Plant of Florida Power & Light Company |
William J. Hensler |
95 |
Gas Turbines |
| TAMU Turbo Show |
1982 |
Efficiency: The Silent Partner of Machine Performance |
David Japikse |
105 |
Centrifugal Compressors |
| TAMU Turbo Show |
1982 |
Shop Full-Load Testing of Centrifugal Compressors |
Angelo Maretti, Mauro Giovannini, Pierluigi Nava |
113 |
Centrifugal Compressors |
| TAMU Turbo Show |
1982 |
Advanced Technologies for Turbomachinery Systems—An Overview |
Melvin J. Hartmann |
123 |
Gas Turbines |
| TAMU Turbo Show |
1982 |
Calculation and Verification of Torsional Natural Frequencies for Turbomachinery Equipment Strings, The |
Roy E. Mondy, John Mirro |
151 |
Condition Monitoring; Rotordynamics |
| TAMU Turbo Show |
1982 |
Continuous Monitoring Systems for High Speed Gearing |
John S. Mitchell |
157 |
Gears |
| TAMU Turbo Show |
1982 |
Prerotation and Fluid Recirculation in the Suction Pipe of Centrifugal Pumps |
F. A. E. Breugelmans, M. Sen |
165 |
Pumps |
| TAMU Turbo Show |
1982 |
Two-Phase Mechanical Face Seal Operation: Experimental and Theoretical Observations |
Alan O. Lebeck, Bing-Ching Chiou |
181 |
Compressor Seals |
| TAMU Turbo Show |
1982 |
Inlet Flow and Aspects of Cavitation in Centrifugal Impellers |
Masao Oshima |
189 |
Pumps |
| TAMU Turbo Show |
1982 |
Compressor and Turbine Shaft Repair: A User s Viewpoint |
Norman E. Bruce |
197 |
Repair |
| TAMU Turbo Show |
1982 |
Material Coating by the Detonation Gun Process |
Walter Wolentarski |
207 |
Repair |
| TAMU Turbo Show |
1982 |
Performance Improvements of a Westinghouse W-171 Gas Turbine by Coating Axial Compressor Blading |
Bruce N. Tilley |
217 |
Axial Compressor; Centrifugal Compressors |
| TAMU Turbo Show |
1983 |
Design and Calculation Methods for High-Speed Gears of Advanced Technology |
Manfred Hirt |
1 |
Gears |
| TAMU Turbo Show |
1983 |
Mechanical Seals for High Face Speed Applications |
Wolfgang Schuebl |
9 |
Pump Seals |
| TAMU Turbo Show |
1983 |
Low Frequency Buckets for Industrial Steam Turbines |
Firm L. Weaver |
15 |
Steam Turbines |
| TAMU Turbo Show |
1983 |
Guidelines for Reliable Extension of Turbine Blade Life |
Joseph Liburdi, James Wilson |
21 |
Gas Turbines |
| TAMU Turbo Show |
1983 |
Structural Integrity of Large Steam Turbine Rotors |
Gary W. Rogers, Clifford H. Wells, Duane P. Johnson |
31 |
Steam Turbines |
| TAMU Turbo Show |
1983 |
Check Valves for Compressor Protection—A User s View |
Frank Andrews, Harold B. Carrick |
45 |
Centrifugal Compressors |
| TAMU Turbo Show |
1983 |
On Stream Solution of a Prototype 8000 HP Motor Instability Problem |
Perry C. Monroe, Jr., Dana J. Salamone |
53 |
Electric Motors |
| TAMU Turbo Show |
1983 |
Technical Approach to the Maintenance and Overhaul of Gas Turbines, A |
Chester D. Hall |
73 |
Maintenance; Gas Turbines |
| TAMU Turbo Show |
1983 |
Rotor Dynamics Modification of an Eight Stage Compressor for Safety/Reliability Improvement |
Francis H. Kludt, Dana J. Salamone |
81 |
Bearings; Rotordynamics |
| TAMU Turbo Show |
1983 |
Design, Testing and Commissioning of a Synchronous Motor-Gear-Axial Compressor |
Charles Jackson, Malcolm E. Leader |
97 |
Axial Compressor |
| TAMU Turbo Show |
1983 |
Generalized and Simplified Transient Torque Analysis for Synchronous Motor Drive Trains, A |
H. Ming Chen, Donald W. McLaughlin, Stanley B. Malanoski |
115 |
Condition Monitoring; Electric Motors |
| TAMU Turbo Show |
1983 |
Impact of Swing Conditions on Turbine Design, The |
Edward J. Finck |
121 |
Steam Turbines |
| TAMU Turbo Show |
1983 |
Industrial Cogeneration System Application Considerations |
John M. Kovacik |
129 |
Cogeneration |
| TAMU Turbo Show |
1983 |
Performance of Apiate Diester Synthetic Lubricants in the Hydrodynamic Regime |
Nigel H. New, Richard H. Schmaus |
139 |
Lubrication Systems |
| TAMU Turbo Show |
1983 |
Practical Aspects of Centrifugal Compressor Surge and Surge Control |
Meherwan P. Boyce, William R. Bohannan, Royce N. Brown, John R. Gaston, Cyrus B. Meher-Homji, Robert H. Meier, Norbert E. Pobanz |
147 |
Centrifugal Compressors |
| TAMU Turbo Show |
1984 |
Overview of Cogeneration Technology—Design, Operation and Maintenance, An |
Meherwan P. Boyce, Cyrus B. Meher-Homji, Alfred B. Focke |
3 |
Cogeneration |
| TAMU Turbo Show |
1984 |
Steam Turbine Efficiency Improvement Application and Conversion, A |
Bruce Weathersby, Andrew P. Mahon, Stephen Chesmejef |
25 |
Steam Turbines |
| TAMU Turbo Show |
1984 |
Design, Control and Startup Features of Three Parallel-Working Propane Compressors Each Having Three Stage Groups |
Wilfred Blotenberg, Hans-Otto Jeske, Heinrich Voss |
39 |
Centrifugal Compressors |
| TAMU Turbo Show |
1984 |
Empirical Solution to an Anti-Surge Control Problem, An |
Stephen R. Locke |
51 |
Centrifugal Compressors |
| TAMU Turbo Show |
1984 |
Variable Speed Fluid Couplings Driving Centrifugal Compressors and Other Centrifugal Machinery |
Gunther H. Peikert |
59 |
Variable Speed Couplings |
| TAMU Turbo Show |
1984 |
Improved Method to Determine the Scoring Resistance of High Power High Speed Gearing, An |
Manfred Hirt |
67 |
Gears |
| TAMU Turbo Show |
1984 |
Analysis of Service Failures |
Paul S. Gupton |
75 |
Metallurgy |
| TAMU Turbo Show |
1984 |
Metallurgical Failure Analysis—What, Why and How |
Edward L. Creamer |
87 |
Metallurgy |
| TAMU Turbo Show |
1984 |
Manufacturers World of Coupling Potential Unbalance, The |
Jon R. Mancuso |
97 |
Couplings |
| TAMU Turbo Show |
1984 |
Critical Speeds of Turbomachinery—Computer Predictions Vs. Experimental Measurements |
John M. Vance, Brian T. Murphy, Harley A. Tripp |
105 |
Rotordynamics |
| TAMU Turbo Show |
1984 |
Temperature Measurements in Fluid Film Bearings |
Denis R. Garner, Anthony J. Leopard |
133 |
Bearings |
| TAMU Turbo Show |
1984 |
Development of High Specific Speed Mixed Flow Compressors |
Fumikata Kano, Yoshiteru Fukao, Takafumi Shirakami |
139 |
Centrifugal Compressors |
| TAMU Turbo Show |
1984 |
Lubrication and Seal Oil Systems |
Roy J. Salisbury, Ricardo Stack, Marc J. Sassos |
151 |
Lubrication Systems |
| TAMU Turbo Show |
1984 |
Journal Bearing Design Types and Their Applications to Turbomachinery |
Dana J. Salmone |
179 |
Bearings |
| TAMU Turbo Show |
1984 |
Coupling Applications for Special Purpose Machinery—Multiple Flexible Membrane Types |
Richard E. Ruckstuhl |
193 |
Couplings |
| TAMU Turbo Show |
1984 |
Application of Single Membrane Type Flexible Power Transmission Couplings |
Merle E. Crane, Jr. |
199 |
Couplings |
| TAMU Turbo Show |
1984 |
Torsional-Damping—Transient and Steady State |
Royce N. Brown |
203 |
Condition Monitoring; Couplings |
| TAMU Turbo Show |
1985 |
Rotordynamic Stability—A Simplified Approach |
Carroll G. Stroh |
3 |
Rotordynamics |
| TAMU Turbo Show |
1985 |
Subsynchronous Vibration Problems in High-Speed, Multistage Centrifugal Pumps |
Ian C. Massey |
11 |
Pumps; Rotordynamics |
| TAMU Turbo Show |
1985 |
Review of Fundamental Two Pole Induction Motor Mechanics |
Cletus A. Corey |
17 |
Electric Motors |
| TAMU Turbo Show |
1985 |
Failure of Turbomachinery Components |
Paul Lowden, Joseph Liburdi |
23 |
Metallurgy |
| TAMU Turbo Show |
1985 |
Storage Preservation of Machinery |
Heinz P. Bloch |
35 |
Preservation |
| TAMU Turbo Show |
1985 |
Shop Vs. Field Corrections to Equipment |
Clifford P. Cook |
47 |
Operation; Repair |
| TAMU Turbo Show |
1985 |
Design of Coupling Enclosures |
Michael M. Calistrat, Robert E. Munyon |
51 |
Couplings |
| TAMU Turbo Show |
1985 |
Gas Lubricated Spiral Grooved Face Seal in the Process Industry, The |
Hans Pennink |
59 |
Compressor Seals |
| TAMU Turbo Show |
1985 |
Startup of a Large Compressor Train—Testing Verifies Design |
Jerry C. Swalley |
65 |
Centrifugal Compressors |
| TAMU Turbo Show |
1985 |
Radial and Thrust Bearing Practices with Case Histories |
Charles Jackson |
73 |
Bearings |
| TAMU Turbo Show |
1985 |
Wind Energy: Applying New Technology to an Old Idea |
Kent L. Fickett |
89 |
Energy; Wind Turbines |
| TAMU Turbo Show |
1985 |
Practical Approach to Understanding Steels, Their Alloying, Heat Treatment and Surface Hardening, A |
Paul S. Gupton |
103 |
Metallurgy |
| TAMU Turbo Show |
1986 |
Testing and Startup Experience with Rotating Equipment at Nation s First Commercial Scale Coal Gasification Plant |
S. Paul Mohan |
1 |
Energy |
| TAMU Turbo Show |
1986 |
On the Manufacture of Impellers for Turbomachinery |
Klaus Boddenberg |
9 |
Centrifugal Compressors |
| TAMU Turbo Show |
1986 |
Oil Seal Dynamics: Considerations for Analysis of Centrifugal Compressors |
R. Gordon Kirk |
25 |
Rotordynamics; Compressor Seals |
| TAMU Turbo Show |
1986 |
Effects of High Pressure Oil Seals on the Rotordynamic Response of Centrifugal Compressors |
Thomas J. Cerwinske, William E. Nelson, Dana J. Salamone |
35 |
Rotordynamics; Compressor Seals |
| TAMU Turbo Show |
1986 |
Balancing of Integral Gear-Driven Centrifugal Compressors |
Hatto Schneider |
53 |
Balancing; Centrifugal Compressors |
| TAMU Turbo Show |
1986 |
Vibration Analysis of Vertical Pumps |
Donald R. Smith, Glenn M. Woodward |
61 |
Condition Monitoring; Rotordynamics |
| TAMU Turbo Show |
1986 |
Improving Critical Speed Calculations Using Flexible Bearing Support FRF Compliance Data |
John C. Nicholas, John K. Whalen, Sean D. Franklin |
69 |
Critical Speed; Rotordynamics |
| TAMU Turbo Show |
1986 |
Dynamic Analysis of an 8,000 HP Steam Turbine Operating Near Its Second Critical Speed |
Bill Majovsky, Dana J. Salamone |
79 |
Rotordynamics |
| TAMU Turbo Show |
1986 |
Retrofitting a Topping Turbine for Performance and Mechanical Improvement |
Vincent S. Wagner, Jr. |
93 |
Steam Turbines |
| TAMU Turbo Show |
1986 |
Retrofit Installation of a Boiler Feed Pump Hydraulic Coupling |
Merwin W. Jones, Scott R. Taylor, Bernard S. Herbage |
101 |
Pumps |
| TAMU Turbo Show |
1986 |
Development and Implementation of an Expert System to Diagnose Motor Vibration Problems |
James E. Corley, Gary D. Darby |
111 |
Electric Motors; Rotordynamics |
| TAMU Turbo Show |
1986 |
Operator s Critical Need for Quality in Turbomachinery, The |
Richard M. Dubner |
119 |
Operation |
| TAMU Turbo Show |
1986 |
Detection of Rotor Cracks |
Donald E. Bently, Agnes Muszynska |
129 |
Condition Monitoring; Rotordynamics |
| TAMU Turbo Show |
1986 |
Shop Balancing of Turbomachinery Rotors |
John R. East, E. Bruce Williams |
147 |
Balancing |
| TAMU Turbo Show |
1986 |
Design Audits |
J. C. Wachel |
153 |
Design Audits |
| TAMU Turbo Show |
1987 |
Application of Ion-Plated Cr-TiN Multilayer Coating to Steam Turbine Blades |
Ryuichiro Ebara, Hiroshi Nakajima, Toshihiko Odohira, Tetsuyoshi Wada, Masaaki Hatano |
3 |
Materials; Steam Turbines |
| TAMU Turbo Show |
1987 |
Compressor Performance Modelling and Monitoring |
John B. Duggan |
9 |
Centrifugal Compressors |
| TAMU Turbo Show |
1987 |
Conversion of a 19,000 HP Propylene Compressor from Steam Turbine to Electric Motor with Geared Variable Speed Turbo Coupling |
Franz-Klaus Henschel, Walter Rappold |
23 |
Fluid Couplings; Electric Motors |
| TAMU Turbo Show |
1987 |
New Solutions in the Process Industry—Application of Six-Stage Integrally Geared Centrifugal Compressors |
Ernst Rothstein |
31 |
Centrifugal Compressors |
| TAMU Turbo Show |
1987 |
Experience with Periodic Vibration Monitoring in Fossil Power Stations |
Kenneth R. Piety, E. Forrest Pardue, Ernest P. Phillips |
41 |
Vibration Monitoring |
| TAMU Turbo Show |
1987 |
Electric Shaft Currents in Turbomachinery |
John M. Vance, Alan B. Palazzolo, Fouad Y. Zeidan |
51 |
Shaft Currents |
| TAMU Turbo Show |
1987 |
Subsynchronous Vibration Problem and Solution In Multistage Centrifugal Compressor |
Paul E. Allaire, Carroll G. Stroh, Ronald D. Flack, John A. Kocur, Jr., Lloyd E. Barrett |
65 |
Centrifugal Compressors; Rotordynamics; Vibration Monitoring |
| TAMU Turbo Show |
1987 |
Retrofit of Gas Lubricated Face Seals in a Centrifugal Compressor, A |
John A. Kocur, Jr., John P. Platt, Jr., Larry G. Shabi |
75 |
Rotordynamics; Compressor Seals |
| TAMU Turbo Show |
1987 |
Revamp of Turbocompressors |
Walter Aicher, Samuel Schnyder |
85 |
Axial Compressor; Centrifugal Compressors |
| TAMU Turbo Show |
1987 |
Revamping the Air Compressor in an Ammonia Plant |
William G. Hoppock, Larry L. Fisher |
93 |
Centrifugal Compressors |
| TAMU Turbo Show |
1987 |
Retrofitting Gas Turbines with Computer Control |
Joel R. Taub, Joseph E. Armacost |
99 |
Governors |
| TAMU Turbo Show |
1987 |
Major Revamp and Retrofit of Identical Process Compressor Trains |
M. Donald Low III, Richard E. Nemec |
105 |
Centrifugal Compressors |
| TAMU Turbo Show |
1988 |
Application of Dry Gas Seals on a High Pressure Hydrogen Recycle Compressor |
Donald R. Carter |
3 |
Compressor Seals |
| TAMU Turbo Show |
1988 |
Influence of Gas Seals on Rotor Stability of a High Speed Hydrogen Recycle Compressor |
Kenneth E. Atkins, Robert X. Perez |
9 |
Rotordynamics; Compressor Seals |
| TAMU Turbo Show |
1988 |
Solution of Subsynchronous Vibration Problems in Radial Flow High-Speed Turbines |
Heiko D. Sandstede, Klaus Reischl, Martin L. Leonhard |
19 |
Condition Monitoring; Rotordynamics |
| TAMU Turbo Show |
1988 |
Online Diagnostics of Rotating Machinery |
Kim Alan Lovejoy |
29 |
Condition Monitoring |
| TAMU Turbo Show |
1988 |
Vacuum Distillation Methods for Lube Oils Increase Turbomachinery Reliability |
Mark A. Adams, Heinz P. Bloch |
41 |
Lubrication Systems |
| TAMU Turbo Show |
1988 |
Water Contamination of Steam Turbine Lube Oil— How to Avoid it |
Willam L. Coleman |
51 |
Lubrication Systems |
| TAMU Turbo Show |
1988 |
Experience with Online Condition Monitoring System |
Refah R. Unsal, Meherwan P. Boyce |
57 |
Condition Monitoring |
| TAMU Turbo Show |
1988 |
Turbine Protection System Performance |
Margaret C. Campbell |
67 |
Condition Monitoring |
| TAMU Turbo Show |
1988 |
Operating Experience with Improved Steam Turbine Packing Rings |
Steve Williams, Ronald E. Brandon |
77 |
Steam Turbines |
| TAMU Turbo Show |
1988 |
Turbine Generator Life Assessment/Extension |
Donald R. McCann, H. R. Jhansale, James L. Anderson |
85 |
Steam Turbines |
| TAMU Turbo Show |
1988 |
Safe Diagram—A Design and Reliability Tool for Turbine Blading |
Murari P. Singh, John J. Vargo, Donald M. Schiffer, James D. Dello |
93 |
Condition Monitoring; Steam Turbines |
| TAMU Turbo Show |
1988 |
Improving Plant Economy Through Retrofit and Maintenance of Compressors |
Karl H. Nissler |
103 |
Centrifugal Compressors |
| TAMU Turbo Show |
1988 |
Emergency Turbine Repair Procedures |
Peter P. Franks, Jr., Ben Eads |
115 |
Steam Turbines |
| TAMU Turbo Show |
1988 |
Large Motor Specification and Selection |
William H. Miller |
123 |
Electric Motors |
| TAMU Turbo Show |
1988 |
Dry Gas Compressor Seals |
Piyush Shah |
133 |
Compressor Seals |
| TAMU Turbo Show |
1988 |
Full Fluid Film Face Seals |
Peter Lytwyn |
141 |
Pump Seals |
| TAMU Turbo Show |
1988 |
Turbomachinery Health Measurement Application and Misapplication |
Malcolm E. Leader |
147 |
Condition Monitoring |
| TAMU Turbo Show |
1988 |
Nondestructive Testing of Turbomachinery Components |
Paul S. Gupton |
161 |
Metallurgy |
| TAMU Turbo Show |
1989 |
Heavy Shell Castings—Design/Operation and Repairs Criteria |
Mark T. Breslin |
3 |
Materials; Repair |
| TAMU Turbo Show |
1989 |
Materials for Centrifugal Compressors—A Progress Report |
Joseph A. Cameron |
9 |
Materials |
| TAMU Turbo Show |
1989 |
Practical Applications of Rotordynamics, Bearing Design, Mechanical Analysis, and Vibration Diagnostics to Design Problems of Rotating Machinery in Operation |
John Mirro |
23 |
Rotordynamics |
| TAMU Turbo Show |
1989 |
Operating Turbomachinery on or Near the Second Critical Speed in Accordance with API Specifications |
John C. Nicholas |
47 |
Balancing; Rotordynamics |
| TAMU Turbo Show |
1989 |
Fouling of Axial Flow Compressors—Causes, Effects, Detection, and Control |
Cyrus B. Meher-Homji, Alfred B. Focke, M. Byron Wooldridge |
55 |
Axial Compressor |
| TAMU Turbo Show |
1989 |
Reapplication of an Induction Steam Turbine to Extraction Cogeneration Service |
Richard E. Nemec, Barnett F. McLaughlin |
77 |
Reapplication |
| TAMU Turbo Show |
1989 |
Maximizing an Ethylene Plant s Turbomachinery Reliability |
John R. Dugas, Jr. |
85 |
Balancing; Maintenance; Rotordynamics |
| TAMU Turbo Show |
1989 |
Maximizing Compressor Efficiency While Maintaining Reliability |
D. Fred Marshall, Joseph A. Cotroneo |
91 |
Centrifugal Compressors |
| TAMU Turbo Show |
1989 |
Solid Couplings with Flexible Intermediate Shafts for High Speed Turbocompressor Trains |
Heinrich Lorenzen, Ernst A. Niedermann, Werner Wattinger |
101 |
Couplings |
| TAMU Turbo Show |
1989 |
Reapplication of Turbomachinery |
Michael Tighe, Juan A. Suarez |
111 |
Reapplication |
| TAMU Turbo Show |
1989 |
Introduction and Case History Review of Active Magnetic Bearings, An |
David A. Weise, Frank D. Pinckley |
121 |
Bearings |
| TAMU Turbo Show |
1989 |
Setting Vibration Criteria for Turbomachinery |
James D. McHugh |
127 |
Specifications; Vibration Monitoring |
| TAMU Turbo Show |
1989 |
Application of Flexible Couplings for Turbomachinery, The |
Jon R. Mancuso, C. Barney Gibbons, Robert E. Munyon |
141 |
Couplings |
| TAMU Turbo Show |
1989 |
Advanced Turbomachinery Health Monitoring—Part II |
Malcolm E. Leader |
167 |
Vibration Monitoring |
| TAMU Turbo Show |
1990 |
Troubleshooting High Speed Couplings |
Eddie L. Schneider |
3 |
|
| TAMU Turbo Show |
1990 |
An Independent Refiner's Approach—Practical Solutions to Complex Gear Problems |
John B. Cary |
9 |
|
| TAMU Turbo Show |
1990 |
Gas Turbine Control Systems Incorporating Condition Monitoring and Fault Tolerance |
Gordon L. Muster II, Michael Feinstein |
21 |
|
| TAMU Turbo Show |
1990 |
Efficient Part Load Combined Cycle Operations |
James O. Stephens, David A. Little, Phillip J. Hunt, Rick Stanaland |
31 |
|
| TAMU Turbo Show |
1990 |
Recent Case Histories with Coupling Enclosures |
Michael M. Calistrat |
37 |
|
| TAMU Turbo Show |
1990 |
Reliability Criteria for Turbine Shaft Based on Coupling Type—Geared to Have Flexibility |
Murari P. Singh, Charles M. Ramsey |
43 |
|
| TAMU Turbo Show |
1990 |
Retrofit, Upgrade, and Demothball of Two Centrifugal Compressor Trains |
Charles Jackson |
51 |
|
| TAMU Turbo Show |
1990 |
Retrofitting Turbomachinery with High Performance Flexible Dry Couplings |
Christian C. Wolford |
63 |
|
| TAMU Turbo Show |
1990 |
Understanding the Vibration Forces in Induction Motors |
Michael J. Costello |
67 |
|
| TAMU Turbo Show |
1990 |
Magnetic Bearings and Dry Gas Seals—A Process Compressor Application |
Kenneth G. Van Bramer, Charles Peter Conquergood |
77 |
|
| TAMU Turbo Show |
1990 |
Energy Recovery in a Gas Distribution Station by Combination of Expanders with Planetary Gear and Optimum Single Valve Control |
Helmut G. H. Beer |
85 |
|
| TAMU Turbo Show |
1990 |
Online Ultrasonic Monitoring of Bearing Wear |
Jeffrey C. Chann |
91 |
|
| TAMU Turbo Show |
1990 |
Vibration Monitoring of Turbomachinery |
Alexander Lifson, Harold R. Simmons |
101 |
|
| TAMU Turbo Show |
1990 |
Piping Vibration Analysis |
J. C. Wachel, Scott J. Morton, Kenneth E. Atkins |
119 |
|
| TAMU Turbo Show |
1990 |
Romex—An Expert System Testbed for Turbomachinery Diagnostics |
David W. Lewis, Pradip N. Sheth |
135 |
|
| TAMU Turbo Show |
1990 |
Troubleshooting Turbomachinery Problems Using a Statistical Analysis of Failure Data |
James E. Corley |
149 |
Diagnostics |
| TAMU Turbo Show |
1991 |
Specifying, Manufacturing, and Testing a Cryogenic Turboexpander Magnetic Bearing System |
Jigger Jumonville, Charles M. Ramsey, Frank Andrews |
3 |
|
| TAMU Turbo Show |
1991 |
Rotordynamic Aspects of a New Hermetically Sealed Pipeline Compressor |
Joachim Schmied |
11 |
|
| TAMU Turbo Show |
1991 |
Submerged Arc Weld Restoration of Steam Turbine Rotors Using Specialized Welding Techniques |
Richard A. LaFave |
19 |
|
| TAMU Turbo Show |
1991 |
Repair Severely Damaged Rotor by Submerged Arc Welding |
Jim Heeter |
35 |
|
| TAMU Turbo Show |
1991 |
Recent Experience with Large Liquid Injected Rotary Screw Process Gas Compressors |
Heinz P. Bloch, Pierre W. Noack |
43 |
|
| TAMU Turbo Show |
1991 |
Adaptation of a Propylene Refrigeration Compressor with Dry Gas Seals |
John R. Dugas, Jr., Bich X. Tran, James F. Southcott |
57 |
|
| TAMU Turbo Show |
1991 |
Shaft Riding Brushes to Control Electric Stray Currents |
John S. Sohre |
63 |
|
| TAMU Turbo Show |
1991 |
Investigation of Suitability of Abradable Seal Materials for Application in Centrifugal Compressors and Steam Turbines, The |
Phillip Dowson, Stephen L. Ross, Carl Schuster |
77 |
|
| TAMU Turbo Show |
1991 |
Fan Laws, the Use and Limits in Predicting Centrifugal Compressor Off Design Performance |
Royce N. Brown |
91 |
|
| TAMU Turbo Show |
1991 |
Centrifugal Compressor Performance Enhancement through the Use of a Single Stage Development Rig |
James M. Sorokes, John P. Welch |
101 |
|
| TAMU Turbo Show |
1991 |
Do It Right the First Time—A Review of an Ethylene Plant Turbomachinery Commissioning Test |
Kazim Akhtar, W. E. Forsthoffer |
113 |
|
| TAMU Turbo Show |
1991 |
General Purpose Steam Turbine Reliability |
John B. Cary |
123 |
|
| TAMU Turbo Show |
1991 |
Standardized Integrally Geared Turbomachines— Tailor Made for the Process Industry |
Udo Fingerhut, Ernst Rothstein, Gerard Sterz |
131 |
|
| TAMU Turbo Show |
1991 |
New Technology on High Performance and Reliability of Mechanical Drive Steam Turbines |
Tomoyoshi Sasaki, Shigeki Morii, Hisakuni Takenaga, Masanori Tsutsumi |
145 |
|
| TAMU Turbo Show |
1991 |
Fluid Film Bearing Fundamentals and Failure Analysis |
Fouad Y. Zeidan, Bernard S. Herbage |
161 |
|
| TAMU Turbo Show |
1991 |
Procedure for Selecting and Evaluating a Special Purpose Motor |
Clifford P. Cook, Michael J. Costello |
187 |
|
| TAMU Turbo Show |
1991 |
Turbomachinery Balancing Considerations |
John R. East |
209 |
|
| TAMU Turbo Show |
1992 |
Dry Screw Compressors in Process Gas Applications Including Maintenance Considerations |
Glen B. Nordquist, Peter A. Bielskus, Russ Clayton |
3 |
Screw Compressors; Maintenance; Rotordynamics |
| TAMU Turbo Show |
1992 |
Twenty Years of Experience with a Modular Design System for Centrifugal Process Compressors |
Klaus Lüdtke |
21 |
Centrifugal Compressors |
| TAMU Turbo Show |
1992 |
Rotor Bearing and Shaft Dynamics Redesign of a Double-Overhung Turboexpander for Reliability Improvement |
Thomas R. Davidson, Dana J. Salamone, Edgar J. Gunter |
35 |
Rotordynamics; Wind Turbines |
| TAMU Turbo Show |
1992 |
Flexible Pad Bearing System for a High Speed Centrifugal Compressor, A |
Pranabesh De Choudhury, M. Raymond Hill, Donald J. Paquette |
57 |
Bearings; Centrifugal Compressors |
| TAMU Turbo Show |
1992 |
Applying the Probabilistic Fitness-for-Service Concept for Assessing Reliability of Weld Repaired Steam Turbine Rotors |
Anthony A. Tipton, Murari P. Singh, C. D. Shepherd |
65 |
Maintenance; Materials; Metallurgy; Repair; Steam Turbine; |
| TAMU Turbo Show |
1992 |
Temporary Repair of a Large Axial Blast Furnace Motor-Blower as a Solution for a Steel Mill Operational Continuity |
Luiz F. S. Mendes, Alberto Azuma, Ernesto J. Meduna |
73 |
Motors; Repair |
| TAMU Turbo Show |
1992 |
Gear Coupling Misalignment Induced Forces and Their Effects on Machinery Vibration |
Alan B. Palazzolo, Stephen R. Locke, Michael M. Calistrat, Robert W. Clark, Jr., Akram Ayoub, Dan Calistrat, Punan Tang |
83 |
Bearings; Couplings; Rotordynamics |
| TAMU Turbo Show |
1992 |
Experience with Nonstandard Coupling Application, An |
Edward B. Wharton, Carroll G. Stroh |
97 |
Alignment; Couplings; Maintenance |
| TAMU Turbo Show |
1992 |
Large Converter-Fed Adjustable Speed AC Drives for Turbomachines |
Andrej Grgic, Werner Heil, Herbert Prenner |
103 |
Alignment; Couplings; Maintenance |
| TAMU Turbo Show |
1992 |
Lateral Vibration Created by Torsional Coupling of a Centrifugal Compressor System Driven by a Current Source Drive for a Variable Speed Induction Motor |
James H. Hudson |
113 |
Couplings; Electric Motors |
| TAMU Turbo Show |
1992 |
Specifying Steam and Rating Conditions for Special Purpose Steam Turbines |
John S. Aalto |
125 |
Specifications; Steam Turbine |
| TAMU Turbo Show |
1992 |
Design, Installation, and Test of a Steam Injection System on an Early Frame 3 Gas Turbine in a Combined Cycle Pipeline Compressor Station |
S. Paul Mohan, Robert D. Underwood, David A. Little |
137 |
Gas Turbines |
| TAMU Turbo Show |
1992 |
Assessing Rotor Stability Using Practical Test Procedures |
Kenneth E. Atkins, Robert X. Perez |
151 |
Centrifugal Compressors; Testing |
| TAMU Turbo Show |
1992 |
Fundamental Understanding of Rotordynamics from a Light Rub (Bounce), A |
Carroll G. Stroh |
161 |
Maintenance; Rotordynamics; Vibration Monitoring |
| TAMU Turbo Show |
1992 |
Axial Air Compressors—Maintaining Peak Efficiency |
M. Theodore Gresh, Marc J. Sassos, Andrew Watson |
173 |
Axial Compressors |
| TAMU Turbo Show |
1992 |
Compressor Types, Classifications, and Applications |
David H. Robison, Peter J. Beaty |
183 |
Axial Compressors; Centrifugal Compressors; Screw Compressors |
| TAMU Turbo Show |
1992 |
Reverse Alignment—Understanding Centerline Measurement |
C. Richard Massey, Alastair J. Campbell |
189 |
Alignment |
| TAMU Turbo Show |
1992 |
Major Foundation Repair of a Twenty Ton Centrifugal Compressor |
Walter L. Garrett, Perry C. Monroe, Jr. |
197 |
Centrifugal Compressors; Repair |
| TAMU Turbo Show |
1993 |
Use of Honeycomb Seals in Stabilizing Two Centrifugal Compressors, The |
Fouad Y. Zeidan, Robert X. Perez, E. Morris Stephenson |
3 |
Centrifugal Compressors |
| TAMU Turbo Show |
1993 |
Comprehensive Cause Analysis of a Coupling Failure Induced by Torsional Oscillations in a Variable Speed Motor, A |
Harley Tripp, Don Kim, Robert Whitney |
17 |
Variable Speed Couplings; Electric Motors |
| TAMU Turbo Show |
1993 |
Shifting Critical Speeds Out of the Operating Range by Changing From Tilting Pad to Sleeve Bearings |
John C. Nicholas, Randall W. Moll |
25 |
Bearings; Critical Speed; Rotordynamics |
| TAMU Turbo Show |
1993 |
Reduced Shaft Stiffness Lowers Running-Speed Bearing Loads and Vibration in a Single Stage Compressor |
Richard W. Armentrout, Gerald E. Wilson |
33 |
Bearings; Centrifugal Compressors; Critical Speed; Rotordynamics |
| TAMU Turbo Show |
1993 |
Retrofit of a Steam Turbine with Dry Gas Seals |
James R. Morris, Carroll G. Stroh, James F. Southcott |
45 |
Compressor Seals; Steam Turbines |
| TAMU Turbo Show |
1993 |
Lubrication and Seal Oil Systems—Common Problems and Practical Solutions |
Marc J. Sassos, Mark R. Babyak, Joseph P. Zerbe, Jr. |
51 |
Lubrication Systems |
| TAMU Turbo Show |
1993 |
Safety, Application, and Service Factors as Applied to Shaft Couplings |
Michael M. Calistrat, William E. Nelson |
65 |
Couplings |
| TAMU Turbo Show |
1993 |
Critical Speeds and the Importance of Stiffness—A Case Study in the Design and Testing of a Large Mechanical Drive Steam Turbine to API Standard 612 |
Lawrence L. Bethel, Bruce E. Gans, Royce N. Brown, Richard A. Lewis |
73 |
Critical Speed; Rotordynamics; Testing; Steam Turbines |
| TAMU Turbo Show |
1993 |
Magnetic Bearing Retrofit of a High Speed, Eight Stage Coker Compressor |
Pranabesh De Choudhury, Andrew P. Watson, Donald R. Carter, Chet Farabaugh |
81 |
Bearings; Centrifugal Compressors |
| TAMU Turbo Show |
1993 |
Predicting and Verifying Rerated Compressor Performance Through Single Stage Scale Model and Limited Field Testing |
Brad Cardon, John Bartos |
91 |
Centrifugal Compressors; Reapplication; Testing |
| TAMU Turbo Show |
1993 |
Case Studies in Turbomachinery Operation and Maintenance Using Condition Monitoring |
Meherwan P. Boyce, George A. Gabriles, Cyrus B. Meher-Homji, A. N. Lakshminarasimha, Feroze J. Meher-Homji |
101 |
Maintenance; Gas Turbines; Steam Turbines |
| TAMU Turbo Show |
1993 |
Practical Application of CFD in the Design of Industrial Centrifugal Impellers, The |
James M. Sorokes |
113 |
Centrifugal Compressors |
| TAMU Turbo Show |
1993 |
Analysis of Torsional Vibrations in Rotating Machinery |
J. C. Wachel, Fred R. Szenasi |
127 |
Vibration Monitoring |
| TAMU Turbo Show |
1993 |
Hydraulic Removal of Coupling Hubs—Keyed and Keyless |
Michael M. Calistrat, James R. Morris, Robert Parker |
153 |
Couplings |
| TAMU Turbo Show |
1993 |
Principles of Operation and Performance Estimation of Centrifugal Compressors |
Meherwan P. Boyce |
161 |
Centrifugal Compressors; Operation |
| TAMU Turbo Show |
1993 |
Test of Process Turbocompressors Without CFC Gasses |
Walter Aicher |
179 |
Centrifugal Compressors; Testing |
| TAMU Turbo Show |
1993 |
Large Motor Installation and Startup |
William H. Miller |
185 |
Alignment; Electric Motors |
| TAMU Turbo Show |
1993 |
Baseline Mapping of Discontinuities Through Nondestructive Testing |
Daniel E. Coleman, Timothy A. Plesz |
191 |
Inspection |
| TAMU Turbo Show |
1993 |
Shop Balancing |
Charles Jackson |
197 |
|
| TAMU Turbo Show |
1994 |
Recent Experiences in Full Load Full Pressure Shop Testing of a High Pressure Gas Injection Centrifugal Compressor |
James M. Sorokes, Mark J. Kuzdzal, Mark R. Sandberg, Gary M. Colby |
3 |
Centrifugal Compressors; Rotordynamics; Testing |
| TAMU Turbo Show |
1994 |
Considerations and Issues in the Replacement of a Centrifugal Compressor Train |
Donald A. Rudisel |
19 |
Centrifugal Compressors; Foundations; Steam Turbines |
| TAMU Turbo Show |
1994 |
Design, Analysis, and Testing of High Performance Bearings in a High Speed Integrally Geared Compressor |
Wen Jeng Chen, Fouad Y. Zeidan, Dilip Jain |
31 |
Bearings; Centrifugal Compressors; Gears; Rotordynamics; Testing; |
| TAMU Turbo Show |
1994 |
False and Misleading Sources of Vibration |
Albert F. Criqui1 |
37 |
Diagnostics |
| TAMU Turbo Show |
1994 |
Analysis and Testing of the Leg Tilting Pad Journal Bearing—A New Design for Increasing Load Capacity, Reducing Operating Temperatures and Conserving Energy |
Keith Brockwell, Waldemar Dmochowski, Scan DeCamillo |
43 |
Bearings; Energy; Lubrication Systems; Testing |
| TAMU Turbo Show |
1994 |
Improving the Mechanical Reliability of a Turbine-compressor-expander Used in a Nitric Acid Manufacturing Plant |
Darayus Pardivala, LeEllen Phelps, Malcolm E. Leader |
57 |
Repair |
| TAMU Turbo Show |
1994 |
Take Transient Startup and Shutdown Data—Rule Number One |
Charles Jackson |
69 |
Design Audits; Diagnostics; Testing |
| TAMU Turbo Show |
1994 |
Use of Engineering Thermoplastics for Centrifugal Compressor Labyrinths, The |
John K. Whalen |
81 |
Compressor Seals |
| TAMU Turbo Show |
1994 |
Impeller Repair Techniques for Centrifugal Compressors |
Charles R. Clayton, Darwin Klein, Mark F. Emerick |
91 |
Centrifugal Compressors; Inspection; Repair; Welding |
| TAMU Turbo Show |
1994 |
Fatigue Damage of Steam Turbine Blade Caused by Frequency Shift Due to Solid Buildup—A Case Study |
Murari P. Singh, Terryl Matthews, Charles Ramsey |
107 |
Repair; Steam Turbines |
| TAMU Turbo Show |
1994 |
Baffling and Temperature Prediction of Coupling Enclosures, The |
Donald Carter, Martin Garvey, Joseph P. Corcoran |
115 |
Couplings |
| TAMU Turbo Show |
1994 |
Retuning a Gear Disc Profile to Eliminate High Gear Vibration |
James H. Hudson, Keith Rouch |
125 |
Gears; Testing |
| TAMU Turbo Show |
1994 |
Selection of Turbomachinery—Centrifugal Compressors |
Gary A. Ehlers |
151 |
Centrifugal Compressors |
| TAMU Turbo Show |
1994 |
Process Safety Management |
J. S. Arendt, David A. Walker |
165 |
|
| TAMU Turbo Show |
1994 |
General Purpose Vs Special Purpose Couplings |
Jon Mancuso |
167 |
Couplings |
| TAMU Turbo Show |
1994 |
Tilting Pad Bearing Design |
John C. Nicholas |
179 |
Bearings; Rotordynamic |
| TAMU Turbo Show |
1994 |
Centrifugal Compressor Application Sizing, Selection, and Modelling |
Royce N. Brown, Richard A. Lewis |
195 |
Centrifugal Compressors |
| TAMU Turbo Show |
1994 |
Some Thoughts on Avoiding Metallurgical Failures |
Paul S. Gupton |
203 |
Metallurgy |
| TAMU Turbo Show |
1994 |
Application of High Speed and High Performance Fluid Film Bearings in Rotating Machinery |
Fouad Y. Zeidan, Donald J. Paquette |
209 |
Bearings |
| TAMU Turbo Show |
1994 |
Magnetic Bearing Operating Experience |
John Sears, Stan Uptigrove |
235 |
Bearings |
| TAMU Turbo Show |
1994 |
Vibrations in Reciprocating Machinery and Piping Systems |
J. C. Wachel, J. D. Tison |
243 |
Design Audits; Diagnostics; Foundations; Maintenance; Operation; |
| TAMU Turbo Show |
1995 |
Experiences in Analysis and Monitoring Compressor Performance |
John B. Duggan, Stephen R. Locke |
3 |
Condition Monitoring; Diagnostics; Energy; Maintenance; Reapplication; |
| TAMU Turbo Show |
1995 |
Factors and Preventive Measures Relative to the High Temperature Corrosion of Blade/Disk Components in FCC Power Recovery Turbines |
Phillip Dowson, Douglas M. Rishel, Norman S. Bornstein |
11 |
Corrosions; Materials; Metallurgy; Gas Turbines; Turboexpanders; |
| TAMU Turbo Show |
1995 |
Application of a Hydrostatic Pressure Lift System for Control of Variable Thrust Loads, An |
Essie Noori, Michael J. Harrington, David R. Stenson |
27 |
Bearings; Maintenance; Steam Turbines |
| TAMU Turbo Show |
1995 |
Tilting Pad Journal Bearing Pivot Design for High Load Applications |
John C. Nicholas, Karl D. Wygant |
33 |
Bearings |
| TAMU Turbo Show |
1995 |
Design and Application of a Squeeze Film Damper Bearing to a Flexible Steam Turbine Rotor, The |
Malcolm E. Leader, John K. Whalen, Godfrey G. Grey, Thomas D. Hess, Jr. |
49 |
Bearings; Rotordynamics; Steam Turbines |
| TAMU Turbo Show |
1995 |
Using a Damper Seal to Eliminate Subsynchronous Vibrations in Three Back-to-Back Compressors |
Robert L. Richards, John M. Vance, Donald J. Paquette, Fouad Y. Zeidan |
59 |
Compressor Seals |
| TAMU Turbo Show |
1995 |
Pad Temperature in High Speed, Lightly Loaded Tilting Pad Journal Bearings |
Stephen L. Edney |
73 |
Bearings |
| TAMU Turbo Show |
1995 |
Thermal Effects in Hydrodynamic Journal Bearings of Speed Increasing and Reduction Gearboxes |
Christophe Bouchoule, Michel Fillon, Daniel Nicolas, Franck Barresi |
85 |
Bearings |
| TAMU Turbo Show |
1995 |
Experience with Empirical Criteria for Rotating Stall in Radial Vaneless Diffusers |
John W. Fulton, William G. Blair |
97 |
Centrifugal Compressors |
| TAMU Turbo Show |
1995 |
Development and Field Application of a Single Rotor Design Dry Gas Seal |
Robert S. Evenson, Brian Mason, Alain G. St.Onge, Daniel V. Frederick |
107 |
Compressor Seals |
| TAMU Turbo Show |
1995 |
Cleaning Turbomachinery without Disassembly, Online and Offline |
Andrew P. Watson, Donald R. Carter, C. Dale Alleyne |
117 |
Maintenance |
| TAMU Turbo Show |
1995 |
Is the Dry Coupling Really Causing Your Vibration Problem |
Guill A. Cornejo, Joseph P. Corcoran, Sujen Chen |
129 |
Coupling |
| TAMU Turbo Show |
1995 |
Troubleshooting Bearing and Lube Oil System Problems |
Thomas H. McCloskey |
147 |
Bearings; Corrosion; Lubrication Systems; Maintenance |
| TAMU Turbo Show |
1995 |
Reciprocating Compressor Valve Reliability Improvements |
John R. Metcalf, Derek Woollatt |
167 |
Reciprocating Compressors |
| TAMU Turbo Show |
1995 |
Leakage and Rotordynamic Effects of Compressible Annular Seals |
Joseph K. Scharrer, Joseph M. Pelletti |
175 |
Rotordynamics; Compressor Seals; Gas Turbines; Steam Turbines |
| TAMU Turbo Show |
1995 |
User Insights for the Effective Purchase of New Turbomachinery |
Erwin A. Gaskamp, Robert E. Carpenter |
191 |
Specifications |
| TAMU Turbo Show |
1995 |
Improved Reliability Through the Use of Design Audits |
J. C. Wachel, Kenneth E. Atkins, James D. Tison |
203 |
Design Audits |
| TAMU Turbo Show |
1995 |
Dry Gas Seal Retrofit |
James F. Southcott, J. Michael Sweeney, Paul L. Feltman, Jr. |
221 |
Centrifugal Compressors; Compressor Seals |
| TAMU Turbo Show |
1996 |
Profiled Leading Edge Groove Tilting Pad Journal Bearing for Light Load Operation |
Stephen L. Edney, John K. Waite, Scan M. DeCamillo |
1 |
Bearings, Critical Speed, Rotordynamics, Steam Turbines |
| TAMU Turbo Show |
1996 |
Thrust Bearing Analysis, Optimization, and Case Histories |
John K. Whalen |
17 |
Bearings |
| TAMU Turbo Show |
1996 |
Selection, Design, and Field Testing of a 10,500 Horsepower Variable Speed Induction Motor Compressor Drive |
James H. Hudson |
25 |
Centrifugal Compressors |
| TAMU Turbo Show |
1996 |
Applying Variable Speed Drives with Static Frequency Converters to Turbomachinery |
Lucien Terens, Andrej Grgic |
35 |
Electric motors; Fans; Pumps |
| TAMU Turbo Show |
1996 |
Turbine Instability Solution—Honeycomb Seals |
Jay Armstrong, Frank Perricone |
47 |
Rotordynamics; Steam Turbines |
| TAMU Turbo Show |
1996 |
Squeeze Film Damper Bearing Experimental Vs Analytical Results for Various Damper Configurations |
Mark J. Kuzdzal, Jerry F. Hustak |
57 |
Bearings; Critical Speed; Rotordynamics; Testing |
| TAMU Turbo Show |
1996 |
Dynamic Data Analysis of Compressor Rotating Stall |
Frank Kushner |
71 |
Axial Compressor; Centrifugal Compressors; Diagnostics; Testing |
| TAMU Turbo Show |
1996 |
Surge Detection in an Industrial Axial Flow Compressor |
David H. Linden, Charles Parker |
83 |
Axial Compressor; Operation; Testing; Vibration Monitoring |
| TAMU Turbo Show |
1996 |
Full Power, Full Pressure, Closed-Loop Test of a Natural Gas Turboexpander |
Duane Bergmann, Hans Nijhuis |
89 |
Rotordynamics; Testing; Turboexpanders |
| TAMU Turbo Show |
1996 |
Application of High Speed and High Efficiency Hydrogen Turboexpanders in Refinery Service |
William A. Kardine, Reza R. Agahi, Behrooz Ershaghi, Fouad Y. Zeidan |
95 |
Bearings; Turboexpanders |
| TAMU Turbo Show |
1996 |
Rotating Equipment Loss Prevention—An Insurer's Viewpoint |
Edward E. Clark |
103 |
Condition Monitoring; Couplings; Maintenance; Steam Turbines, Turboexpanders |
| TAMU Turbo Show |
1996 |
Turbine Overhaul Frequency: Time or Performance Based? |
David A. Johns, John T. Bertucci |
123 |
Inspection; Maintenance; Repair; Steam Turbines; Welding; |
| TAMU Turbo Show |
1996 |
A Systematic Approach to Case Recertification |
Edward A. Abraham, Daniel E. Coleman, William S. Bielecki |
133 |
Centrifugal Compressors; Inspection; Reapplication; Testing |
| TAMU Turbo Show |
1996 |
Expander Field Remanent Life Analysis and Assessment |
David H. Linden |
139 |
Condition Monitoring; Inspection; Materials; Turboexpanders |
| TAMU Turbo Show |
1996 |
|