ASME Biennial 1987 Stability and Damped Critical Speeds of a Flexible Rotor in Fluid-Film Bearings J. W. Lund 1
ASME Biennial 1987 Experimental Verification of Torquewhirl-the Destabilizing Influence of Tangential Torque J. M. Vance and K. B. Yim 11
ASME Biennial 1987 Instability and Unbalance Response of Dissymmetric Rotor-Bearing Systems P. M. Guilen, P. Berthiet, G. Ferraris, and M. Lalanne 19
ASME Biennial 1987 Stability of Cracked Rotors in the Coupled Vibration Mode C. A. Papadopoulos and A. D. Dimarogonas 25
ASME Biennial 1987 The Stability of Rotating Shafts When Distributed Gyroscopic Effects Are Taken Into Account Yu, Haomin 35
ASME Biennial 1987 Rotor Dynamic Analysis on Personal Computers V. K. Obeid 41
ASME Biennial 1987 Evaluation of Pivot Stiffness for Typical Tilting Pad Journal Bearing Designs R. G. Kirk and S. W. Reedy 49
ASME Biennial 1987 Identification of the Dynamic Characteristics of Oil-Film Bearings Q. Zhang, G. Lallement, and R. Fillod 57
ASME Biennial 1987 A Versatile Finite Element Analysis of Journal Bearings and Oil Film Dampers M. E. Samaha and T. S. Sankar 63
ASME Biennial 1987 System Configuration and Its Vibration Response Z. A. Parszewski 71
ASME Biennial 1987 Automatic Generation of Component Modes for Rotordynamic Substructures S. H. Crandall and N. A. Yeh 79
ASME Biennial 1987 Flexural Vibration of Turbine Generators: Simple Representations of Symmetrical Rotors T. S. Wilkinson 85
ASME Biennial 1987 Improvements in Lightly Loaded Rotor/Bearing and Rotor/Seal Models A. Muszynska 91
ASME Biennial 1987 Attenuation of Rotor Vibration Using Controlled-Pressure Hydrostatic Squeeze-Film Dampers M. L. Adams and H. Zahloul 99
ASME Biennial 1987 Estimation of Squeeze-Film Bearing Inertia, Damping and Stiffness Coefficients C. R. Burrows, N. C. Kucuk, M. N. Sahinkaya, and R. S. Stanway 109
ASME Biennial 1987 Application of Equivalent Linearizing Method to the Analyses of Flexible Rotor-Uncentralised Squeeze Film Damper Bearings System Meng Guang, Xu Jian-Kang, and Xue Zhong-Qing 115
ASME Biennial 1987 Theoretical and Experimental Investigation on the Non Synchronous Responses of Flexible Rotor- Uncentralised Squeeze Film Damper Bearings System Meng Guang, Zhu Chang-Sheng, Feng Xin Hai, and Xue Zhong-Qing 121
ASME Biennial 1987 Electromagnetic Control of Oil-Film Supported Rotors Using Sparse Measurements C. R. Burrows, M. N. Sahinkaya, and S. Clements 127
ASME Biennial 1987 Active Control of a Flexible, Two-Mass Rotor Suspended in Magnetic Bearings B. G. Johnson 133
ASME Biennial 1987 Active Electromagnetic Suspension of an Elastic Rotor: Modelling, Control, and Experimental Results J. R. Salm 141
ASME Biennial 1987 Application of an Active Magnetic Bearing for Vibration Control Near Critical Speeds in Large Rotating Machines C. Chan Hew Wai and J. Morel 151
ASME Biennial 1987 Subsynchronous Orbits Observed in Rotor - Squeeze Film Damper System Changsheng Zhu and Xinhai Feng 159
ASME Biennial 1987 High Order Subharmonic Response of High Speed Rotors in Bearing Clearance F. F. Ehrich 167
ASME Biennial 1987 Supercritical Shafting for an Advanced Turboprop Engine P. D. Hylton and S. A. Klusman 175
ASME Biennial 1987 A General Theory for Viscoelastic Rotor Dynamics W. Zhang 183
ASME Biennial 1987 Control of Flexible Rotors by Active Elements H. Ulbrich 191
ASME Biennial 1987 Modelling and Control of Turbomachinery Vibrations R. Firoozian and R. Stanway 197
ASME Biennial 1987 Excitation Force Identification of Rotating Machines Using Operational Rotor/Stator Amplitude Data and Analytical Synthesized Transfer Functions J. Verhoeven 207
ASME Biennial 1987 Rotor Active "Anti-Swirl" Control A. Muszynska, W. D. Franklin, and D. E. Bently 215
ASME Biennial 1987 A Two-Plane Extension of the Four Run Balancing Technique L. J. Everett 223
ASME Biennial 1987 Balancing With Phase Only (Single-Plane and Multiplane) W. C. Foiles and D. E. Bently 229
ASME Biennial 1987 Rotor Vibration Control, Part I: Periodically Forced Vibrations Z. Gosiewski. 237
ASME Biennial 1987 Rotor Vibration Control, Part It: Free Vibrations Z. Gosiewski. 245
ASME Biennial 1987 Formulation of Labyrinth Seal Effects in Rotor Dynamic Analyses J. Dugundji, C. N. Duong, Y. -P. A. Chang 253
ASME Biennial 1987 Experimental Investigations of Rotor Whirl Excitation Forces Induced by Labyrinth Seal Flow C. Rajakumar and F. Sisto 263
ASME Biennial 1987 Experimental Study on the Static and Dynamic Characteristics of Screw Grooved Seals H. Kanki and T. Kawakami 273
ASME Biennial 1987 Experiments on Dynamic Stiffness and Damping of Tapered Bore Seals D. P. Fleming 279
ASME Biennial 1987 On the Dynamic Response of a Helical Geared System Subjected to a Static Transmission Error in the Form of Deterministic and Filtered White Noise Inputs S. V. Neriya, R. B. Bhat, and T. S. Sankar 287
ASME Biennial 1987 The Vibration Problem in Gear Coupled Rotor Systems J. W. David and N. -G. Park 297
ASME Biennial 1987 Coupled Whirling Dynamics of a Flexible Bladed Disk/Shaft System Considering Coriolis Effects N. Hagiwara and H. Iijfima 305
ASME Biennial 1987 Application of Chaos Theory to the Contacting Dynamics of High-Speed Rotors W. M. Szczygielski 319
ASME Biennial 1987 Rotor Dynamic Analysis Axially Coupled System I. Anwar and R. Colsher 327
ASME Biennial 1987 Evaluation of Exiting Forces in Turbomachinery Induced by Flow in Labyrinth Seals M. Baumgartner 337
ASME Biennial 1987 A Method for Calculating Labyrinth Seal Inlet Swirl Velocity R. G. Kirk 345
ASME Biennial 1987 Calculation of Rotordynamic Coefficients and Leakage for Annular Gas Seals by Means of Finite Difference Techniques R. Nordmann, F. J. Dietzen, and H. P. Weiser 351
ASME Biennial 1987 Numerical and Analytical Study of Fluid Dynamic Forces in Seals and Bearings L. T. Tam, A. J. Przekwas, A. Muszynska, R. C. Hendricks, M. J. Braun, and R. L. Mullen 359
ASME Biennial 1987 Hybrid Finite Element -- Boundary Element Simulation of Rotating Machinery Supported on Flexible Foundation and Soil L. L. Earles, A. B. Palazzolo, C. -K. Lee, and C. H. Gerhold 371
ASME Biennial 1987 Numerical Computation Method for Rotor-Foundation (or Casing) Dynamics: (Based on the Myklested- Prohl Transfer Matrix Method) T. Inagaki 383
ASME Biennial 1987 The Complex Modal Analysis for the Large Rotor-Bearing-Foundation System Zheng Zhao~chang, Wu Nan-ping, and Zhou Kiao-p lng 397
ASME Biennial 1987 An Investigation of Vibration Characteristics of Rotor and Rotor-Support System for Locomotive Gasturbine Xia Songbo, Wu Xinhua, and Wang Guangming 399
ASME Biennial 1987 Dynamic Characteristics of Annular Tapered Pump Seal T. Iwatsubo and B. -S. Yang 405
ASME Biennial 1987 Theory Versus Experiment for the Rotordynamic Coefficients of Labyrinth Gas Seals: Part I - A Two Control Volume Model J. K. Scharrer 411
ASME Biennial 1987 Theory Versus Experiment for the Rotordynamic Coefficients of Labyrinth Gas Seals: Part II - A Comparison to Experiment D. W. Childs and J. K. Scharrer 427
ASME Biennial 1987 The Effects of Elastic Deformation on Seal Dynamics T. Iwatsubo and B. S. Yang 435
ASME Biennial 1987 Circular Whirling and Unbalance Response of Nonlinear Rotors G. Genta and A. Repaci 441
ASME Biennial 1987 Spiral Vibrations of Rotors J. Schmied 449
ASME Biennial 1987 Stability of Rotation of a Rotor With a Winding Band L. Cveticanin 457
ASME Biennial 1987 Dynamics of Textile Spindles on a Programmable Calculator M. Callskan, M. A. Demircelik, and B. E, Platin 461
ASME Biennial 1987 The Dynamic Response of Rotors to Rubs During Startup A. J. Smalley 467
ASME Biennial 1987 Rub Interactions of Flexible Casing Rotor Systems with Base Excitations F. K. Choy, J. Padoran, and C. Batur 477
ASME Biennial 1987 Transient Rotor Dynamic Rub Phenomena; Theory and Test A. F. Kascak, A. B. Palazzolo, and G. Montaque 485
ASME Biennial 1987 Synchronization Theory of Self-Synchronous Vibrating Machines With Ellipse Motion Locus B. C. Wen 495
ASME Biennial 1987 Torsional Vibrations in Turbogenerators Due to Network Disturbances P. Schwibinger, R. Nordmann, R. Wohlrab, K. Steigeder, and P. Wutsdorff 501
ASME Biennial 1987 Diagnosing Vibration Problems in Vertically Mounted Pumps T. J. Walter, M. M. Marchlone, and H. G. Shugars 511
ASME Biennial 1987 A Numerical Method for Studying the Mechanical Vibrations of a Small Aerogenerator N. Beauruler 519
ASME Biennial 1987 On the Transient Analysis of Rotor-Bearing Systems R. Subblah and N. F. Rieger 525
ASME Biennial 1987 Transient Whirling of a Rotating Shaft With an Unbalanced Disk Shuh-Jing Ying 537
ASME Biennial 1987 Transient Analysis of Rotors by Transfer Matrix Method J. S. Rao, K. V. B. Sarma, and K. Gupta 545
ASME Biennial 1987 A Combined Sturm Sequence and Riccati Transfer Matrix Method for Eigenproblem Solution of a Flexible Rotor H.-L. Qlausson 553
ASME Biennial 1987 Rotor Stability of High Pressure Multistage Centrifugal Compressors H. R. Wyssmann 561
ASME Biennial 1987 Dynamic Analysis of Centrifugal Pump Rotors With Fluid-Mechanical Interactions 141. Diewald and R. Nordmann 571
ASME Biennial 1987 Fluid-Structure Interaction Forces at Pump-impeller-Shroud Surfaces for Rotordynamic Calculations D. W. Childs 581
ASME Biennial 1987 The Responses of the Simple Rotor With Surface Transverse Crack Y. B. Wang, Z. S. Duan, X. L. Huang, and B. C. Wen 595
ASME Biennial 1987 Experiments and Calculations on the Vibrations of Rotating Radial Impellers H. Irretier 601
ASME Biennial 1987 Crack Depth Analysis of a Rotating Shaft by Vibration Measurement B. O. Dirr and B. K. Schmalhorsr 607
ASME Biennial 1987 Development of an On-Line Rotor Crack Detection and Monitoring System I. Imam, J, Scheibel, S. H. Azzaro, and R. J. Bankert 615
ASME Biennial 1987 Turbine-Alternator Run-Down Vibration Analysis: Automated Crack Detection R. G. Herbery 631
ASME Biennial 1989 Response of a Servomechanism Controlled Swinging Arm Actuator for Head Positioning in Magnetic Storage Devices B. M. Khan and R. B. Bhat 1
ASME Biennial 1989 Dynamic Optimization of a Rotor-Bearing Set D. Bendeux and D. Doizelet 11
ASME Biennial 1989 Experimental Verification of Blade-Disc-Rotor Coupled Torsional Vibration for Large Turbine H. Kanki and Y. Yamamoto 17
ASME Biennial 1989 Optimization Study of Engine Mounting Systems S. Saitoh and M. Igarashi 23
ASME Biennial 1989 A Convenient Method for Diagnosis of Shafting Crack M. Zhao and Z. H. Luo 29
ASME Biennial 1989 Flexibility Matrix Calculation for a Stepped Rotor Shaft S. Doughty 35
ASME Biennial 1989 Influence of Impeller Shroud Forces on Turbopump Rotor Dynamics J. P. Williams and D. W. Childs 41
ASME Biennial 1989 The Use of Beam-Like Modal Data for Stiffness Profile Estimation by the EBS Method - Part I: Justification and Implementation T. A. Vest and M. S. Darlev 51
ASME Biennial 1989 Vibration of Rotor Partially Filled With Two Kinds of Liquids B. S. Yang, Y. H. Yu, and T. Iwatsubo 57
ASME Biennial 1989 Fluid Induced Rotordynamic Instability of a Rotor With an Unbound Centrifugal Impeller J. Colding-Jorgensen 63
ASME Biennial 1989 A New Method for the Critical Speed Calculation of Rotor-Bearing Systems - Part I: Theory P. Y. Klm, R. C. Flanagan, and L R. G. Lowe 71
ASME Biennial 1989 A New Method for the Critical Speed Calculation of Rotor-Bearing Systems - Part II: Application P. Y. Klm, R. C. Flanagan, and I. R. G. Lowe 77
ASME Biennial 1989 Dynamic Response of Rotors Using Modal Reduction Techniques R. Subblah, R. B. Bhat, and T. S. Sankar 83
ASME Biennial 1989 Vibrations of Anisotropic Rotor-Bearing Systems Y.-G. Jei and C.-W. Lee 89
ASME Biennial 1989 Vibrations of Rotating Disc-Like Structures - A Transfer Matrix Approach M. Ghosh, A. Rajamani, and IV. Ganesan 97
ASME Biennial 1989 Identification of Modal Parameters of Rotating Systems Using Perturbation Techniques: Part 1 A. Muszynska, D. E. Bently, W. D. Franklin, and R. D. Hayashida 107
ASME Biennial 1989 Identification of Modal Parameters of Rotating Systems Using Perturbation Techniques: Part 2 A. Muszynska, D. E. Bently, W. D. Franklin, and R. D. Hayashida 113
ASME Biennial 1989 Periodic Response Investigation of Large Order Nonlinear Rotordynamic Systems Using Collocation A. N. Jean and H. D. Nelson 119
ASME Biennial 1989 Coupled Bending - Bending Vibrations of Rotating Pretwisted Cantilever Blades-Method of Polynomial Frequency Equation P. V. Reddy, K. N. Gupta, and J. S. Rao 129
ASME Biennial 1989 Coupled Vibration Analysis: Torsional Vibration of Turbine-Generator-Blade Coupled System A. Okabe, R. Kaneko, O. Matsushita, K. Namura, and T. Yoshida 135
ASME Biennial 1989 Modeling Rotating Shafts Using Axisymmetric Solid Finite Elements With Matrix Reduction R. W. Stephenson and K. E. Rouch 141
ASME Biennial 1989 The Performance of the Runge-Kutta Method in the Context of Mechanism Systems With Discontinuities J. M. B. Brown, K. Soorig, W. K. D. Borthwick, M. V. Gandhi, and B. S. Thompson 149
ASME Biennial 1989 Modeling of Rotor-Foundation Systems Using Frequency-Response Functions in a Finite Element Approach K. E. Rouch, T. H. McMains, and R. W. Stephenson 157
ASME Biennial 1989 Reduced Order Rotor Modeling Combining Theoretical and Experimental Data L F. Santos and Id. I. Weber 167
ASME Biennial 1989 Transient Response of a Large Turbocharger Rotor G. M. Chapman and J. B. Turnbull 173
ASME Biennial 1989 A New Method for Transient Dynamic Analysis of Rotors Using Successive Merging and Condensation Techniques S. Ratan and J. Rodriguez 181
ASME Biennial 1989 A Wave Propagation for the Analysis of Transient Torsional Vibrations Due to Start-Up of a Rotor Machine R. Bogacz, T. Szolc, and H. Irretier 187
ASME Biennial 1989 Transient Vibration of an Asymmetric Rotor System Through Critical Speed Z. C. Fang artd Z. H. Luo 191
ASME Biennial 1989 Post-Stability (Limit Cycle) Operation in Terms of Bearings Alignment Z. A. Parszewski and K. Krynicki 199
ASME Biennial 1989 A Generalized Approach to the Buckling Stability of Rotor Systems V. Arun, S. Jayaram, and L. D. Mitchell 205
ASME Biennial 1989 Stability of an internally Damped Timoshenko Rotor Under Dynamic Axial Loads S. K. Sinha 213
ASME Biennial 1989 Stability Behavior of Geared Rotor Systems Regarding Torsional Lateral Coupling A. Zuerbes, T. Neumer, A. Klimmek, P. Schwibinger, and R. Nordmann 217
ASME Biennial 1989 Stability Analysis of Force Coupled Motion in Helical Geared Rotor Systems S. V. Neriya, R. B. Bhat, and T. S. Sankar 225
ASME Biennial 1989 Detection of Developing Bearing Failures by Means of Vibration Z. Reif and M. S. Lai 231
ASME Biennial 1989 Experimental Investigation of Cavitation Effects on the Squeeze Films Force Coefficients F. Y. Zeidan and J. M. Vance 237
ASME Biennial 1989 Vibration Control of a Translating String Coupled to Hydrodynamic Bearings C. A. Tan, B. Yang, and C. D. Mote, Jr. 243
ASME Biennial 1989 Experimental Determination of tile Journal Bearing Oil Film Coefficients by the Method of Selective Vibration Orbits K. Brockwell and W. Dmochowski 251
ASME Biennial 1989 Variable Impedance Hydrodynamic Journal Bearings for Controlling Flexible Rotor Vibrations M. J. Goodwin, T. Boroomand, and C. J. Hooke 261
ASME Biennial 1989 The Role of Bearing Support Stiffness Anisotropy in Suppression of Rotordynamic Instability F. Ehrich 269
ASME Biennial 1989 The Elastodynamic Response of a Slider-Crank Mechanism With Clearance in the Gudgeon-Pin Bearing: A Theoretical and Experimental Investigation K. Soong and B. S. Thompson 275
ASME Biennial 1989 Rotor-Bearing Asymptotic Response for a Frequency Sweep Test A. El Hafidi and G. Lallement 285
ASME Biennial 1989 Prediction of Steady State Response of Flexible Rotor Systems With Nonlinear Supports T. N. Shiau and A. N. Jean 293
ASME Biennial 1989 Free Vibration Analysis of Continuous Shaft on Elastic Bearings by Timoshenko Beam Theory Y.-S. He and T. C. Huang 301
ASME Biennial 1989 Influence of Active Magnetic Bearing Sensor Location on the Calculated Critical Speeds of Turbomachinery R. G. Kirk, J. Keesee, D. Ohanehi, and F. Pinckney 309
ASME Biennial 1989 Preliminary Experiments of Eddy Current Magnetic Bearing Performance P. McLaren, L. Ting, E. Shea, K. Connor, and J. Tichy 317
ASME Biennial 1989 Test of an Active Magnetic Bearing in Liquid Nitrogen K. W. Lang 321
ASME Biennial 1989 Active Vibration Control for Flexible Rotor by Optimal Direct-Output Feedback Control K. Nonami, E. DiRusso, and D. P. Fleming 327
ASME Biennial 1989 A Programmable Electromagnetic Bearing for Vibration Control of a Flexible Shaft C. D. Bradfield, J. B. Roberts, and S. Karunendiran 335
ASME Biennial 1989 Analysis, Design, and Testing of a Magnetic Bearing for a Centrifuge R. B. Zmood, D. K. Artand, and J. A. Kirk 345
ASME Biennial 1989 An Active Optimal Control Strategy of Rotor Vibrations Using External Forces W. Zhu, L Castelazo, and H. D. Nelson 351
ASME Biennial 1989 Cross Feedback Stabilization of the Digitally Controlled Magnetic Bearing Y. Okada, B. Nagai, and T. Shimane 361
ASME Biennial 1989 Test and Theory for Piezoelectric Actuator-Active Vibration Control of Rotating Machinery A. B. Palazzolo, R. R. Lin, A. F. Kascak, J. Montague, and R. M. Alexander 367
ASME Biennial 1989 A Method of Rotor Vibration Control Via Microprocessor Z. Gosiewski 375
ASME Biennial 1989 Spray Automated Balancing of Rotors: How Process Parameters Influence Performance A. J. Smalley, FI. M. Baldwin, D. P. Fleming, and J. S. Yuhas 381
ASME Biennial 1989 A Method for Using Transfer Matrix Methods for Balancing Flexible Rotors F. H. Speckhart and J. A. Euler 389
ASME Biennial 1989 A Study of Whole Machine Balancing Technique for Overhung Centrifuge With Flexible Supports Z. Baotang, T. S. Sankar, V. Kamala, and H. Shizheng 395
ASME Biennial 1989 On-Line Thermal Balancing Technique for a Large Turbo-Generator M. Zumbach, G. Schweitzer, and K. Schoellhorn 403
ASME Biennial 1989 A New Balance Method for Flexible Rotors With Asymmetric Principal Stiffnesses X. Songbo, W. Xinghua, W. Guangming, P. Yucai, L. Rongqiang, and X. Shichang 411
ASME Biennial 1989 Experimental and Numerical Analysis of Read/Write Head Suspension Dynamics for High Performance Floppy Drive Systems G.M. Frees and D.K. Miu 1, vol 2
ASME Biennial 1989 Coupled Vibratrion of Cracked Shafts C.A. Papadopoulos and A.D.Dimarogonas 7, vol 2
ASME Biennial 1989 Resonance Frequency Prediction of Automotive Serpentine Belt Drive Systems by Computer Modelling R.C.S. Gaspar and LE.Hawker 13, vol 2
ASME Biennial 1989 Actuator Design for Rotor Control H.Ulbrich and J.Althaus 17, vol 2
ASME Biennial 1989 Analysis of Non-Repeatable Radial Vibration of Magnetic Disk Spindles K. Ono, N. Saiki,Y. Sanada, and A. Kumano 23, vol 2
ASME Biennial 1989 Dynamic Simulation for Predicting Surface Roughness in Turning D. Y.Jang and A. Seireg 31, vol 2
ASME Biennial 1989 Modeling and Sensitivity Studies of the Feed drive System of a CNC lathe Driven by a DC Motor M.G. Mehrabi and A. Hemami 37, vol 2
ASME Biennial 1989 Regenerative Chatter Vibration of Cut-Off Type lathe Tools E Marui, M. Hashimoto, and S. Kato 45, vol 2
ASME Biennial 1989 Chatter Growth Analysis by the Extended Interpretation of the Theoretical Stability Chart K. Jemielniak and A. Widota 51, vol 2
ASME Biennial 1989 Modeling and Prediction of Dynamic Stability of Milling Machines Ting Xian Zhang and Bao Shun Liu 57, vol 2
ASME Biennial 1989 Modeling and Finite Element Analysis of Drill Bit Vibrations O. Tekinalp and A. G. Ulsoy 61, vol 2
ASME Biennial 1989 Enhancement of Dynamic Quality of a Machine Tool Using Frequency Response Optimization Method E.I. Rivin and W.D'Ambrogio 69, vol 2
ASME Biennial 1989 Chatter Suppression by Using Piezoelectric Active Damper T. Matsubara, H. Yamamoto, and H.Mizumoto 79, vol 2
ASME Biennial 1989 A Modification of Machine Tool Dynamical Properties Using Vibration Absorbers K. Marchelek, S. Berczynski, and A. Witek. 85, vol 2
ASME Biennial 1989 The Application of Component Mode Synthesis Techniques to the Dynamic Analysis of the Machine Tool Spindle Systems Yuan Bijun 91, vol 2
ASME Biennial 1989 The SSME HPFTP Wavy Interstage Seal: Part I - Seal Analysis J.K. Scharrer and D.J. Nunez 95, vol 2
ASME Biennial 1989 The SSME HPFTP Wavy Interstage Seal: Part II - Rotordynamic Analysis B. T. Murphy, J. K. Scharrer, and L. A. Hawkins 101, vol 2
ASME Biennial 1989 Calculation of Rotordynamic Coefficients for Labyrinth Seals Using a Three Dimensional Finite Difference Method P. Weiser and R. Nordmann 109, vol 2
ASME Biennial 1989 Calculation of Velocity and Pressure Fields in Labyrinth Seals of Pumps F. Banquet 115, vol 2
ASME Biennial 1989 Study on Self-Excited Vibration Caused by Steam Fluid Force in Labyrinth Seals Huang Xiuzhu, Zhang Xueyan, and Zhang Youzhu 123, vol 2
ASME Biennial 1989 Advanced Analysis of Multi-Ring Liquid Seals S.W. Reedy and R.G. Kirk 129, vol 2
ASME Biennial 1989 Calculations of Dynamic Forces in Liquid Annular Seal T. Iwatsubo, T. Matsumoto, and Y. Tsujimoto 135, vol 2
ASME Biennial 1989 Experimental Study of Dynamic Fluid Forces and Moments for a Long Annular Seal Y. Kanemori and T. Iwatsubo 141, vol 2
ASME Biennial 1989 Unbalance Response of a Jeffcott Rotor Incorporating Long Squeeze Film Dampers A. El-Shafei 149, vol 2
ASME Biennial 1989 Numerical and Experimental Study of a Finite Submerged Squeeze Film Damper I. Kinsale and J. Tichy 159, vol 2
ASME Biennial 1989 Identification of Squeeze-Film Bearing Dynamics Using a Recursive, Frequency-Domain Filter R. Stanway, T. K. Tee, and J. E. Mottershead 167, vol 2
ASME Biennial 1989 Prediction of the Performance of Cavitated Squeeze-Film Dampers C. R. Burrows, N. C. Kucuk, and M. N. Sahinkaya 177, vol 2
ASME Biennial 1989 Friction Damping of Circular Motion J.H. Griffin and C-H. Menq 187, vol 2
ASME Biennial 1989 A Study of the Preview Dynamic Damper N. Tanaka and Y. Kikushima 195, vol 2
ASME Biennial 1989 Concepts and Solutions of Damping Description in Materials and Members L Gaul 205, vol 2
ASME Biennial 1989 Dynamic Reanalysis of Weakly Non-Proportionally Damped Gyroscopic Systems Zhao-Chang Zheng and YongHu 215, vol 2
ASME Biennial 1989 A Decentralized Noncollocated Active Vibration Control Algorithm C.J. Maday and N.H. Johnson 223, vol 2
ASME Biennial 1989 Smart Structures Incorporating Electro-Rheological Fluids for Vibration-Control and Active Damping Applications: An Experimental Investigation S. B. Choi, B. S. Thompson, and M. V. Gandhi 229, vol 2
ASME Biennial 1989 Experimental Evaluation of Wide Band Active Vibration Controllers A. V. Metcaffe and J. S. Burdess 237, vol 2
ASME Biennial 1989 Modal Control of a Flexible Beam With Multiple Sensors and Actuators P. K. Raju and S.P.Sun 245, vol 2
ASME Biennial 1989 Vibration Control of the Elastodynamic Response of High-Speed Flexible Linkage Mechanisms C.K. Sung and Y.C. Chen 253, vol 2
ASME Biennial 1989 Viscoelastic Circular Plate Wave Guide Absorber C.D. Hettema,Y.S. Shin, K.S. Kim 263, vol 2
ASME Biennial 1989 An Active Dynamic Vibration Absorber for Multi-Degree-of-Freedom Systems H. Nishimura, K. Yoshida, and T. Shimogo 275, vol 2
ASME Biennial 1989 Application of Clearance Viscous Damper S. Sathikh and S. Ganapathy 283, vol 2
ASME Biennial 1989 Transfer Function Method for Active Control Design of Structure Constrained by Frequency D.Y. Chen,Z.W. Hu, and F.Y. Fan 289, vol 2
ASME Biennial 1989 Low Frequency Vibration Isolation Technology for Microgravity Space Experiments C.M. Grodsinsky and G. V. Brown 295, vol 2
ASME Biennial 1989 Active Vibration Isolation For Micro-Displacement Feedback Control H. S. Tzou 303, vol 2
ASME Biennial 1989 Advanced Electronics Transport Module Designed for Military Environment D. Shimansky 311, vol 2
ASME Biennial 1989 Adaptive Control for Semi-Active Isolators S. Bellizzi and R. Bouc 317, vol 2
ASME Biennial 1989 The Use of Canonical Correlation Analysis in Component Model Reduction R.E. Skelton and D. Da 325, vol 2
ASME Biennial 1989 Dynamics and Control of Tethered Satellite Systems: A Brief Review A.K. Misra and V.J. Modi 333, vol 2
ASME Biennial 1989 An Approach to Dynamics and Control of a Class of Interconnected Rigid/Flexible Orbiting Bodies Y. Morita and V.J. Modi 347, vol 2
ASME Biennial 1989 Generic Model Laboratory Tests for Large Flexible Structure Control T. Lange 355, vol 2
ASME Biennial 1989 Effects of Flexibility on the Attitude Stability of Spinning Spacecraft B.N. Agrawal 363, vol 2
ASME Biennial 1989 Some Definitions of Degree of Controllability (Observability) for Discrete-Time Systems and Their Applications X. Guangqian and P.M. Bainum 369, vol 2
ASME Biennial 1991 Observations of Subcritical Superharmonic and Chaotic Response in Rotordynamics Fredric Ehrich 1
ASME Biennial 1991 Analytical and Experimental Simulation of Loose Pedestal Dynamic Effects on a Rotating Machine Vibrational Response Pavel Goldman and Agnes Muszynska 11
ASME Biennial 1991 Response of a Rotating Beam Subject to an Accelerating Force A. Argento and R. A. Scott 19
ASME Biennial 1991 Spontaneous Sidebanding in High Speed Rotordynamics Fredric Ehrich 25
ASME Biennial 1991 Flexural Critical Speeds of a Two-Rotor Bearing System With One Overhang C. Y. Chow, I-Chih Wang, and Rae Chow 35
ASME Biennial 1991 Weight-Excited Vibrations of Rotating Curved Beams Jorg Wauer 43
ASME Biennial 1991 Nonlinear Steady-State Rotordynamic Analysis Using Transfer Coefficient Method M. Kobayashi, S. Saito, and S. Yamauchi 51
ASME Biennial 1991 A Slewing Motor-Beam System: Performance, Behavior and Dimensional Analysis Jy-Jen F. Sah and Roger W. Mayne 59
ASME Biennial 1991 Virtual Balancing of Rotors Supported by Magnetic Bearings H. Ming Chen and C. P. Roger Ku 65
ASME Biennial 1991 A Comparison of Experimental Results and Theoretical Predictions for the Rotordynamic Coefficients of Short (L/D - 1/6) Labyrinth Seals Joseph M. Pelletti and Dara W. Childs 69
ASME Biennial 1991 Identification and Resolution of a One-Times Slip Frequency Synchronous Motor Field Start Up Problem F. H. Wolff and J. F. Hustak 77
ASME Biennial 1991 Active Vibration Control of Flexible Rotor Using H~ Control Theory K. Nonami, J. W. Wang, M. Sampei, and T. Mira 85
ASME Biennial 1991 Consistent Modeling of Rotating Timoshenko Shafts Subject to Axial Loads S. H. Choi, C. Pierre, and A. G. Ulsoy 93
ASME Biennial 1991 Rotor System Modeling With Foundation Matrices From Experimental Modal Data Robert W. Stephenson and Keith E. Rouch 105
ASME Biennial 1991 Modelling of an Elastic Disk With Finite Hub Motions and Small Elastic Vibrations With Application to Rotordynamics George T. Flowers 115
ASME Biennial 1991 Rotor Whirl Measurements on a Long Rotating Cylinder Partially Filled With Liquid Jorgen Colding-Jorgensen 127
ASME Biennial 1991 Accurate Free Vibration Analysis for Rotating Shaft Bo Suk Yang and Walter D. Pilkey 133
ASME Biennial 1991 Determination of Non-Conservative Coupling Loss Factors Between Rotating Machinery Components J. M. Cuschieri, J. C. Sun, and F. Journeau 139
ASME Biennial 1991 On the Dynamics of a Beam Rotating at Nonconstant Speed Yii-Mei Huang and Ming-Shang Lin 147
ASME Biennial 1991 The Influence of Mounting Compliance and Operating Conditions on the Radial Stiffness of Ball Bearings: Analytic and Test Results M. F. Butner, B. T. Murphy, and R. A. Akian 155
ASME Biennial 1991 Influence of Thermal Conductivity of Lubricant on the THD Characteristics of a Plain Journal Bearing C. Rajalingham, B. S. Prabhu, R. B. Bhat, and G. D. Xistris 163
ASME Biennial 1991 Jumping Phenomenon in Journal Bearing Krystof Kryniski 169
ASME Biennial 1991 Effect of Backlash on Vibration Spectrum in Spur Gearboxes Incorporating Sleeve Bearings Fawzi M. A. EI-Saeidy 175
ASME Biennial 1991 Design of Magnetic Bearings for Rotor Systems With Harmonic Excitations D. Dhar and L. E. Barrett 183
ASME Biennial 1991 Transient Response Technique Applied to Active Magnetic Bearing Machinery During Rotor Drop Toshiyasu Ishii and R. Gordon Kirk 191
ASME Biennial 1991 The Rocketdyne Multifunction Tester: Operation of a Radial Magnetic Bearing as an Excitation Source L. A. Hawkins, B. T. Murphy, and K. W. Lang 201
ASME Biennial 1991 Tile Effect of Sensor Location on the Forced Response Characteristics of Rotors With Active Magnetic Bearings D. Rawal, J. Keesee, and R. Gordon Kirk 209
ASME Biennial 1991 Fluid Inertia Forces in Squeeze Film Dampers A. El-Shafei and S. H. Crandall 219
ASME Biennial 1991 The Effectiveness of Porous Squeeze Film Dampers for Suppressing Nonsynchronous Motions Shiplng Zhang, Litang Yan, Qihan Li, and Yoshihiko Kawazoe 229
ASME Biennial 1991 Optimal Design of Centered Squeeze Film Dampers C. Nataraj and Hashem Ashrafiuon 237
ASME Biennial 1991 The Effect of Bistable Jump on the Reliability of Squeeze Film Damper Zhu Changsheng 245
ASME Biennial 1991 Experimental Investigation on the Dynamic Pressure and Force Response of a Partially Sealed Squeeze Film Damper G. Meng, L. A. San Andres, and J. M. Vance 251
ASME Biennial 1991 Controllable Squeeze Film Damper: An Application of Electro-Rheological Fluid Shin Morishita and Jun'ichi Mitsui 257
ASME Biennial 1991 Investigation on the Bistable Jump in Subcritical Speed Range of Rotor Supported on Uncentralized Squeeze Film Dampers Zhu Changsheng, Wang Xixuan, and Fu Caigao 263
ASME Biennial 1991 Vibrations of Foundations Interacting With Subsoil Experimental Studies and BE Calculations L. Gaul 269
ASME Biennial 1991 Estimation of Response and Loss Factor of Damped Sandwich Beam S;. Markus and T. Nanasi 275
ASME Biennial 1991 Parameter Identification of Non-Linear Impact Damper Kang-Yu He and Xiao-Xu Yuan 281
ASME Biennial 1991 Self-Operating On-Off Type Semi-Active Damper and Its Performance Test Hyeong-keun Klm, Nak Hoon Sung, and Youn-sik Park 287
ASME Biennial 1991 Dynamic Torque Response of an Electro-Rheological Clutch R. Firoozian, W. A. Bullough, S. Xiao, A. Hosseini-Sianaki, A. R. Johnson, and J. Makin 295
ASME Biennial 1991 An Efficient Method for Calculating Damped Critical Speeds of Rotor-Bearing Systems D. Z. Wang and D. L. Taylor 303
ASME Biennial 1991 Characteristic Study of Torsional Vibration on a Full Size Turbine-Generator Unit Huang Xiuzhu, Zhang Xueyan, Sun Daixia, and Gong Qing 311
ASME Biennial 1991 Progressive Torsional-Axial Continued Vibrations in Crankshaft Systems: A Phenomenon of Coupled Vibration X. G. Song, T. X. Song, D. X. Xue, and B. Z. Li 319
ASME Biennial 1991 Semiactive Control of Vibrations in Automobiles Junghsen Lieh and Imtiaz Haque 325
ASME Biennial 1991 A Review of the Dynamics of Independently Rotating Wheel Systems for Railway Vehicles S. Narayana Swamy, R. V. Dukkipati, and M. O. M. Osman 331
ASME Biennial 1991 Integral and State Variable Feedback Controllers for Improved Performance in Automotive Vehicles Mohamed M. EIMadany 339
ASME Biennial 1991 A Study of Control Strategy for Vehicle Semi-Active Suspension System Yiming Zhang and Ye Lin 347
ASME Biennial 1991 A Transfer Matrix Technique for Evaluating the Natural Frequencies and Critical Speeds of a Rotor With Multiple Flexible Disks Fangsheng Wu and George T. Flowers 353
ASME Biennial 1991 Application of Generalized Polynomial Expansion Method to Nonlinear Rotor Bearing Systems Jori Li Hwang and Ting Nung Shiau 355
ASME Biennial 1993 Thermal/Mechanical Effect of Rotor-to-Stator Rubs in Rotating Machinery Muszynska, A. 1-6 CN000551375
ASME Biennial 1993 Rotor Whirl Forces Induced by the Tip Clearance Effect in Axial Flow Compressors Ehrich, F. 7-18 CN000551387
ASME Biennial 1993 An Experimental Study of the Influence of Disk Flexibility and Rubbing on Rotordynamics Wu, F.; Flowers, G. T. 19-26 CN000551399
ASME Biennial 1993 Steady-State Unbalance Response of Continuous Rotors on Anisotropic Supports Curti, G.; Raffa, F. A.; Vatta, F. 27-34 CN000551405
ASME Biennial 1993 Improved Rotordynamic Unbalance Response Calculations Using the Polynomial Method Murphy, B. T. 35-42 CN000551417
ASME Biennial 1993 Input Sensitive Dynamic Resistor of a Rotating System Lee, B. K. 43-46 CN000551429
ASME Biennial 1993 Whirling of Composite-Material Driveshafts Including Bending-Twisting Coupling and Transverse Shear Deformation Bert, C. W.; Kim, C.-D. 47-54 CN000551430
ASME Biennial 1993 Torsional Vibration Analysis of Shafts With Sections of Tapered Diameter Baker, J. R.; Rouch, K. E. 55-66 CN000551442
ASME Biennial 1993 A Theoretical and Experimental Investigation of a Gas Operated Bearing Damper for Turbomachinery: Part I - Theoretical Model and Predictions Sundararajan, P.; Vance, J. M. 67-84 CN000551454
ASME Biennial 1993 A Theoretical and Experimental Investigation of a Gas Operated Bearing Damper for Turbomachinery: Part II - Experimental Results and Comparison With Theory Sundararajan, P.; Vance, J. M. 85-120 CN000551466
ASME Biennial 1993 A Waved Journal Bearing Concept-Evaluating Steady-State and Dynamic Performance With a Potential Active Control Alternative Dimofte, F. 121-128 CN000551478
ASME Biennial 1993 Modelling Fluid Inertia Forces of Short Journal Bearings for Rotordynamic Applications El-Shafei, A. 129-138 CN000551480
ASME Biennial 1993 A New Damper Seal for Turbomachinery Vance, J. M.; Schultz, R. R. 139-148 CN000551491
ASME Biennial 1993 Commissioning of a High Speed Composite Rotor With Hydrostatic Dampers and Ceramic Rolling Element Bearings Headifen, R. N.; Fuller, R. L.; Kitzmiller, J. R. 149-158 CN000551508
ASME Biennial 1993 Effect of Straight Through Labyrinth Seals on Rotordynamics Vance, J. M.; Zierer, J. J.; Conway, E. M. 159-172 CN000551510
ASME Biennial 1993 Theory Versus Experiment for Short (L/D = 1/6) Honeycomb and Smooth Annular Pressure Seals Childs, D. W.; Kleynhans, G. F. 173-180 CN000551521
ASME Biennial 1993 The Effect of Inlet Grooves and Swirl on the Dynamics of Long Annular Seals in Centrifugal Pumps Ismail, M.; Brown, R. D.; France, D. 181-192 CN000551533
ASME Biennial 1993 Asymmetrical Rolling and Self Excited Vibrations in a Hot Roughing Mill Jafari, A. A.; Tieu, A. K.; Basu, A. 193-202 CN000551545
ASME Biennial 1993 Non-Linear Vibrations and Asymmetry in Coupled Tandem Hot Rolling Mills Jafari, A. A.; Tieu, A. K.; Basu, A. 203-212 CN000551557
ASME Biennial 1993 An Eigenvalue Inclusion Principle for Simple, Rotationally Periodic Structures Shen, I. Y. 213-218 CN000551569
ASME Biennial 1993 Vibration of a Rotating Stepped Beam by the Distributed Transfer Function Method Kuang, W.; Tan, C. A. 219-228 CN000551570
ASME Biennial 1993 High Speed Rotating Shafts Design Algorithm Po Kee Wong 229-240 CN000551582
ASME Biennial 1993 Predicting the Vibrations of a Spinning Inflated Membrane Segalman, D. J.; Slavin, A. M. 241-248 CN000551594
ASME Biennial 1993 A Theoretical Approach to Determine Angular Stiffness and Damping Coefficients of an Axial Spline Coupling in High-Speed Rotating Machinery Ku, C.-P. R.; Walton, J. F.; Lund, J. W. 249-256 CN000551600
ASME Biennial 1993 Development of an On-Line PC-Based Diagnostic Expert System Pawtowski, E. C.; Kirk, R. G.; Cochran, J. S. 257-264 CN000551612
ASME Biennial 1993 An Experimental Investigation of the Dynamic Characteristics of an Axial Spline Coupling in High-Speed Rotating Machinery Walton, J. F.; Ku, C.-P. R.; Lund, J. W. 265-270 CN000551624
ASME Biennial 1993 Digital Measurement Method on Rotating Shaft Torsional Vibration Fu, H.; Yan, P. 271-276 CN000551636
ASME Biennial 1993 Crack Detection in Turbo Rotors Vibrational Analysis and Fault Detection Soeffker, D.; Bajkowski, J.; Mueller, P. C. 277-288 CN000551648
ASME Biennial 1993 Stability and Response of Rotors Supported on Active Magnetic Bearings Ramesh, K.; Kirk, R. G. 289-296 CN000551650
ASME Biennial 1993 Internal Rotor Friction Induced Instability in High-Speed Rotating Machinery Walton, J. F.; Martin, M. R. 297-306 CN000551661
ASME Biennial 1993 Rotating, Axially Loaded Timoshenko Shaft: Modeling and Stability Karch, G.; Wauer, J. 307-314 CN000551673
ASME Biennial 1993 Stability and Stability Degree of a Cracked Flexible Rotor Supported on Journal Bearings Guang, M.; Gasch, R. 315-324 CN000551685
ASME Biennial 1993 Isotropic Control of Rotor Bearing System Kim, C.-S.; Lee, C.-W. 325-330 CN000551697
ASME Biennial 1993 Dynamic Analysis of Flexible Rotors Subjected to Torque and Force Yun, J.-S.; Lee, C.-W. 331-338 CN000551703
ASME Biennial 1993 An Integrated Approach Toward the Dynamic Analysis of High-Speed Spindles: Part I - System Model Chen, C. H.; Wang, K. W.; Shin, Y. C. 339-346 CN000551715
ASME Biennial 1993 An Integrated Approach Toward the Dynamic Analysis of High-Speed Spindles: Part II - Dynamics Under Moving End Load Chen, C. H.; Wang, K. W. 347-354 CN000551727
ASME Biennial 1993 On the Generation of Bending Vibration in a Drill Rod Kaski, J. 355-362 CN000551739
ASME Biennial 1993 Dynamic Characteristics of TEHD Tilt Pad Journal Bearing Simulation Including Multiple Mode Pad Flexibility Model Kim, J.; Palazzolo, A. 363-380 CN000551740
ASME Biennial 1995 Modal Loss Factors of Thick Three-Layer Cylinders With Viscoelastic Core Hamidzadeh, H. R.; Jiang, Y. 3-8 CN014995287
ASME Biennial 1995 Damping Machine Tools With Imbedded Viscoelastic Materials Constrained by Shear Tubes Marsh, E. R.; Hale, L. C. 9-14 CN014995292
ASME Biennial 1995 Shape Optimization of Unconstrained Beam and Plate Damping Layers Lumsdaine, A.; Scott, R. A. 15-22 CN014995300
ASME Biennial 1995 Vibration Analysis of Metal/Polymer/Metal Components Mignery, L. A. 23-34 CN014995315
ASME Biennial 1995 H~2 Optimal Tuning of Passive Isolators and Absorbers Van Pelt, T. H.; Bernstein, D. S. 35-40 CN014995320
ASME Biennial 1995 Transient Vibration Reduction Through the Use of Dual Absorbers Bursal, F. H. 41-52 CN014995336
ASME Biennial 1995 An Electromechanical Vibration Absorber Nagem, R. J.; Madanshetty, S.; Medhi, G. 53-58 CN014995341
ASME Biennial 1995 Active Vibration Absorption Using Delayed Resonator With Relative Position Measurement Olgac, N.; Hosek, M. 59-66 CN014995357
ASME Biennial 1995 Digital Optimal Multivariable Control of a Smart Structure Featuring Piezoelectric Sensors and Actuators Sannah, M.; Smaili, A.; Lahdhiri, T. 67-76 CN014995362
ASME Biennial 1995 Modeling, Actuation, and Control of an Active Fluid Vibration Isolator Panza, M. J.; McGuire, D. P.; Jones, P. J. 77-88 CN014995378
ASME Biennial 1995 Effects of Desired Transmissibility Functions on the Performance and Design of Control Systems for Microgravity Isolation Systems Tsai, N.-C.; Sinha, A. 89-96 CN014995383
ASME Biennial 1995 Chaotic Response of a Hard Duffing Type Vibration Isolator With Combined Coulomb and Viscous Damping Leung, A. Y. T.; Ravindra, B.; Mallik, A. K.; Chan, C. W. 97-104 CN014995399
ASME Biennial 1995 Vibration Localization in Rotating Shafts: Part I - Theory Galip Ulsoy, A.; Pierre, C.; Choi, S. 105-116 CN014995406
ASME Biennial 1995 Vibration Localization in Rotating Shafts: Part II - Experiment Galip Ulsoy, A.; Pierre, C.; Choi, S. 117-124 CN014995411
ASME Biennial 1995 On the Active-Passive Hybrid Vibration Control Actions of Structures With Active Constrained Layer Treatments Liao, W. H.; Wang, K.-W. 125-142 CN014995427
ASME Biennial 1995 Active Boundary Control of Elastic Cables Baicu, C. F.; Rahn, C. D. 143-148 CN014995432
ASME Biennial 1995 A Variational Formulation: A Work-Energy Relation and Damping Mechanisms of Active Constrained Layer Treatments Shen, I. Y. 149-160 CN014995448
ASME Biennial 1995 Energy Flow Control of Interconnected Structures: Part I - Modal Subsystems Hall, S. R. 161-172 CN014995453
ASME Biennial 1995 Energy Flow Control of Interconnected Structures: Part II - Structural Subsystems Hall, S. R. 173-184 CN014995469
ASME Biennial 1995 Passive Control of Structural Vibration in Base-Isolated Shear Structures Hussein, R. 185-188 CN014995474
ASME Biennial 1995 Optimum Structural Vibration Control With Bounds on Control Forces Bolonkin, A. A.; Veley, D. E.; Khot, N. S. 189-196 CN014995480
ASME Biennial 1995 Frequency Domain Approach to Solve the Time-Optimal Control of a Distributed Parameter System Alli, H.; Singh, T. 197-206 CN014995495
ASME Biennial 1995 Active Mode Localization in Distributed Parameter Systems With Consideration of Limited Actuator Placement Shelley, F. J.; Clark, W. W. 207-214 CN014995502
ASME Biennial 1995 Robustness of Natural Controls of Distributed-Parameter Systems Jai Hyuk Hwang; Doo Man Kim; Kyoung Ho Lim 215-226 CN014995518
ASME Biennial 1995 Spherical Complaint Model for Vibration Estimation and Control Thompson, T. J. 227-238 CN014995523
ASME Biennial 1995 Active Vibration Quenching Using Inverse Dynamics Trautt, T. A.; Bayo, E. 239-246 CN014995539
ASME Biennial 1995 The Method of Successive Decrease and the Concept of Harmonic Wave Filter in Structural Wave Control Wang, D.; Wang, Q.; Leung, A. Y. T. 247-254 CN014995544
ASME Biennial 1995 Two-Time Scale Control of Flexible Structures Chen, L.; Xi, Y.; Zhang, Z. 255-260 CN014995550
ASME Biennial 1995 Hybrid Vibration Control of a Cable-Stayed Bridge Bell, M.; Shoureshi, R. A. 261-272 CN014995565
ASME Biennial 1995 Passenger Ride Comfort Through Observer Based Control Taghirad, H. D.; Esmailzadeh, E. 273-280 CN014995570
ASME Biennial 1995 A Pointwise Approach for Synthesizing Semi-Active Vehicle Suspensions Chang, P.-M.; Jayasuriya, S. 281-288 CN014995586
ASME Biennial 1995 Tuning of a Rear Electronic Control Engine Mount Galvin, D. D. 289-296 CN014995591
ASME Biennial 1995 Control of a Slewing Motor-Beam System With Coulomb Friction Crassidis, A. L.; Mayne, R. W. 297-306 CN014995609
ASME Biennial 1995 Dynamic Stability Analysis for Multi-Flute End Milling Shorr, M. J.; Liang, S. Y. 307-316 CN014995614
ASME Biennial 1995 Complete Balancing of Multicylinder Engines Without Requiring Harmonic Balancers Bagci, C. 317-324 CN014995620
ASME Biennial 1995 Bode Integral Constraints and the Zero Spillover Controller in Active Noise and Vibration Control Hong, J.; Bernstein, D. S. 325-332 CN014995635
ASME Biennial 1995 Remarks on the Modelling of Active Structures With Colocated Piezoelectric Actuators and Sensors Loix, N.; Preumont, A. 335-340 CN014995640
ASME Biennial 1995 System Identification of Torsionally-Coupled Structures Lin, C.-C.; Ueng, J.-M.; Lin, P.-L. 341-350 CN014995656
ASME Biennial 1995 Identification of Inertial Properties for Resiliently Supported Mechanical System Nakamura, M.; Sawanobori, T.; Nagamatsu, A. 351-358 CN014995661
ASME Biennial 1995 The Modeling and Active Control of Flexible Plate Structure for Reducing Noise Radiation Seto, K.; Miyata, T.; Ren, M.; Doi, F. 359-368 CN014995677
ASME Biennial 1995 Rigid and Flexible Body Modeling for a Triaxial Shaker Control System Dougherty, J. J.; El-Sherief, H.; Nguyen, T. 369-374 CN014995682
ASME Biennial 1995 Development of V-Shaped Hybrid Mass Damper and Its Application to High-Rise Buildings Imazeki, M.; Tanida, K.; Mutaguchi, M.; Koike, Y. 375-382 CN014995698
ASME Biennial 1995 Hydraulic Actuator Tuning in the Control of a Rotating Flexible Beam Mechanism Panza, M. J.; Mayne, R. W. 383-392 CN014995705
ASME Biennial 1995 Vibration Control Method and Adaptability for Flexible Structures With Distributed Parameters Using a Hybrid Dynamic Absorber Seto, K.; Kondo, S.; Ezure, K. 393-400 CN014995710
ASME Biennial 1995 Hybrid Feedback-Feedforward Control for Vibration Suppression De Man, P.; Preumont, A. 401-406 CN014995726
ASME Biennial 1995 Active Vibration Control of Triple Flexible Structures Combined With Actuators Seto, K.; Toba, Y.; Doi, F. 407-416 CN014995731
ASME Biennial 1995 Vibration Control of the Piping System: A Method Using Feedback-Error Learning Takita, Y. 417-424 CN014995747
ASME Biennial 1995 Vibration Control With Neural Network Dynamic Compensator Shiotsuka, T.; Yoshida, K.; Nagamatsu, A. 425-432 CN014995752
ASME Biennial 1995 H{ Structural Controller Design Based on Absolute Acceleration Measurement Yamada, N.; Nishitani, A. 433-438 CN014995768
ASME Biennial 1995 Nonstationary Robust Positioning Control of Flexible Structures Hara, S.; Yoshida, K. 439-448 CN014995773
ASME Biennial 1995 Sliding Mode Control for Flexible Structures With Control-Based Frequency-Shaping Hyperplane Nonami, K.; Nishimura, H. 449-458 CN014995789
ASME Biennial 1995 A Design Method of Robust Controller for a Flexible Structure Using H/ Control Theory Watanabe, T.; Yoshida, K. 459-466 CN014995794
ASME Biennial 1995 Optimal Design of a Truss Structure for a Segmented Reflector Hahn, M. A.; Mirmirani, M. D.; Boussalis, H. R. 467-470 CN014995801
ASME Biennial 1995 An Optimal Design Method for Rubber Dynamic Vibration Absorber Satoh, Y.; Misawa, H. 471-478 CN014995817
ASME Biennial 1995 Transient Response Analysis of Compressor-Piping Coupled System in Air Conditioning Units Sawanobori, T.; Nakamura, M.; Nagamatsu, A.; Okamoto, J. 479-486 CN014995822
ASME Biennial 1995 Integrated Optimum Design of Structure and Control System by Modal Analysis Kajiwara, I.; Tsujioka, K.; Nagamatsu, A. 487-494 CN014995838
ASME Biennial 1995 Vibration Control Using Combined Independent Modal Space Control and Fuzzy Logic Asdigha, M.; Greif, R. 495-502 CN014995843
ASME Biennial 1995 Vibration Control of Moving Flexible Structure by Repetitive Control Mitsuta, S.; Tsuji, H.; Itoh, H.; Ogasawara, Y. 503-510 CN014995859
ASME Biennial 1995 The Trajectory Tracking Control of 2-Link Flexible Arm Using Tendon Mechanism Cao, H.; Yoshida, K. 511-518 CN014995864
ASME Biennial 1995 Dynamic Walk of a Quadruped Locomotion Robot Using Robust Optimal Tracking Control Uchida, H.; Nonami, K. 521-528 CN014995870
ASME Biennial 1995 Experimental Verification of Time-Varying Impulse Shaping for a Two-Link Flexible Manipulator Cho, J.-K.; Park, Y.-S. 529-536 CN014995885
ASME Biennial 1995 Stabilizing and Positioning Control of Inverted Flexible Pendulum by Means of H{ Servo Control With Partial-State Feedback Nishimura, H.; Ohnuki, O.; Nonami, K.; Totani, T. 537-544 CN014995890
ASME Biennial 1995 Magnetically Induced Vibration in a 8-Pole, 9-Slot, Brushless DC Motor Chuang, T. Y.; Lieu, D. K. 545-552 CN014995908
ASME Biennial 1995 Contact Impedance Sensors: Applicability for the Evaluation of Flexible Structures Daugela, A.; Fujii, H.; Misaki, A. 553-560 CN014995913
ASME Biennial 1995 Electromagnetically Generated Acoustic Noise in DC Machines Hwang, S.; Lieu, D. K. 561-570 CN014995929
ASME Biennial 1995 Development of Six Degrees of Freedom Vibration Isolation System for Microgravity Environment Suzuki, T.; Tanida, K.; Tanji, A.; Okubo, K. 571-578 CN014995934
ASME Biennial 1995 New Control Algorithms for Semi-Active Dynamic Vibration Absorbers Abe, M.; Igusa, T. 579-588 CN014995940
ASME Biennial 1995 Sensorless Active Suppression of Transverse Vibration of Flexible Plate Matsuda, K.-I.; Okada, Y. 589-594 CN014995955
ASME Biennial 1995 Active and Regenerative Control of Electrodynamic Vibration Damper Okada, Y.; Harada, H. 595-602 CN014995960
ASME Biennial 1995 Parametric Studies of Photo Deformation and Optical Actuation Tzou, H. S.; Chou, C.-S. 603-610 CN014995976
ASME Biennial 1995 Response of Piezoelectric Solids to Unitary Impulsive Loads: A Computational Approach Khutoryansky, N.; Sosa, H. 611-616 CN014995981
ASME Biennial 1995 Piezoelectric Actuation of von Karman Circular Plates With Thermal Deformation and Nonlinear Oscillation Tzou, H. S.; Zhou, Y.-H. 617-626 CN014995997
ASME Biennial 1995 Optimum Design of Sandwich Panels With Piezoelectric and Shape Memory Alloy Actuators Birman, V.; Simonyan, A. 627-638 CN014996002
ASME Biennial 1995 Design, Modeling and Fabrication of Micro-Robotic Actuators With Ionic Polymeric Gel and SMA Micro-Muscles Shahinpoor, M.; Burmeister, M. W. J.; Hoffman, W. 639-648 CN014996018
ASME Biennial 1995 Simultaneous Use of Piezoelectric Ceramics as Sensor and Actuator For Through-Plate Sound Transmission Control Akishita, S.; Aoyama, S.; Yokoi, K.; Ma, C. C. H. 649-656 CN014996023
ASME Biennial 1995 Optimum Structure/Control Design Using Multiobjective Optimization Techniques Sunar, M.; Rao, S. S. 657-664 CN014996039
ASME Biennial 1995 Digital Optimal Multivariable Control of a Smart Structure Featuring Piezoelectric Sensors and Actuators Sannah, M.; Smaili, A.; Lahdhiri, T. 665-674 CN014996044
ASME Biennial 1995 Finite Element Vibration Analysis of Composite Plates With Embedded Shape Memory Alloy Fibers at Elevated Temperatures Zhong, Z. W.; Mei, C. 675-684 CN014996050
ASME Biennial 1995 Elasto-Plastic Analysis of Anisotropic Plates and Shells With Moderate Thickness by FEM Zhong, W. F.; Huang, Y. Y. 685-690 CN014996065
ASME Biennial 1995 Active Constrained Layer Damping of Seismic Excitations Baz, A.; Poh, S. 691-700 CN014996070
ASME Biennial 1995 Consideration of Both Extensional and Shear Strain of Core Material in Modal Property Estimation and Sandwich Plates Lee, B.-C.; Kim, K.-J. 701-708 CN014996086
ASME Biennial 1995 Controlling the Vibration Levels of Vibrating Vanes Using Viscoelastic Materials Oyadiji, S. O.; Tomlinson, G. R. 709-718 CN014996091
ASME Biennial 1995 Optimal Length of Constrained Layers on a Substrate With Linearly Varying Strain Demoret, K. B.; Torvik, P. J. 719-726 CN014996109
ASME Biennial 1995 Interpretation of Active Dampers as Variable-Parameter Passive Devices Anderson, E. H. 727-736 CN014996114
ASME Biennial 1995 An ER Long-Stroke Damper: Performance Modelling Under Quasi-Steady Conditions Peel, D. J.; Stanway, R.; Sproston, J. L.; Bullough, W. A. 737-744 CN014996120
ASME Biennial 1995 Optimal Damping of Vibrations in Multibody Systems Through Equivalent Friction Control Laws Dakev, N. V.; Chipperfield, A. J.; Fleming, P. J. 745-752 CN014996135
ASME Biennial 1995 Identification of a Significantly Non-Proportionally Damped Structure Using Force Appropriation Holmes, P. S.; Wright, J. R.; Cooper, J. E. 753-760 CN014996140
ASME Biennial 1995 Reduction of Vibrations in Complex Structures With Viscoelastic Neutralizers: A Generalized Approach De Espindola, J. J.; Bavastri, C. A. 761-766 CN014996156
ASME Biennial 1995 The Frequencies and Damping of a Cantilever Composite Plate With a Viscoelastic Layer Cupial, P.; Niziol, J. 767-774 CN014996161
ASME Biennial 1995 The Method of Trajectories for Finding Eigenfrequencies of Damped Structures Pesterev, A. V.; Tavrizov, G. A. 775-780 CN014996177
ASME Biennial 1995 Transient and Steady-State Response of Constrained Translating Strings Zhu, W. D.; Mote, C. D. 783-794 CN014996182
ASME Biennial 1995 The Efficacy of the Momentum Balance Method in Transverse Impact Problems Yigit, A. S.; Christoforou, A. P. 795-804 CN014996198
ASME Biennial 1995 Dynamic Analysis of the Axially Moving String Based on Wave Propagation Ying, S.; Tan, C. A. 805-814 CN014996205
ASME Biennial 1995 Existence of Periodic Solution for Equation of Motion of Simple Beams With Harmonically Variable Length Esmailzadeh, E.; Nakhaie-Jazar, G.; Mehri, B. 815-822 CN014996210
ASME Biennial 1995 Exact Perturbation for the Vibration of Almost Annular or Circular Plates Parker, R. G.; Mote, C. D. 823-834 CN014996226
ASME Biennial 1995 Orthogonal Bases for Eigenvalue Sensitivities: Torsional Vibration Nayfeh, S. A.; Asada, H. 835-838 CN014996231
ASME Biennial 1995 Split Vibration Modes in Acoustically-Coupled Disk Stacks Tseng, J.-G.; Wickert, J. 839-846 CN014996247
ASME Biennial 1995 Green's Function Synthesis for Layered Distributed Parameter Systems Lueschen, G. G. G.; Bergman, L. A. 847-854 CN014996252
ASME Biennial 1995 On the Analysis and Fundamental Frequency of Slightly Curved Sandwich Beams With a Delamination Rossettos, J. N. 855-861 CN014996268
ASME Biennial 1995 Distributed Transfer Function Analysis of Ring-Stiffened Cylindrical Shells Zhou, J.; Yang, B. 861-868 CN014996273
ASME Biennial 1995 Effects of the Electromagnetic Forces on Vibrational Behavior of the Laminated Mechanical Structure of Stator Cores Ozturk, C. 869-878 CN014996289
ASME Biennial 1995 Analysis of the Equations of Linear Controlled Structures Ma, F.; Lee, W. C. 879-884 CN014996294
ASME Biennial 1995 On the Number of Modes Required to Observe Forces in Flexible Structures Marangoni, R. D. 885-894 CN014996301
ASME Biennial 1995 Prediction of Rotating Machinery Vibration Using Balance Simulation With Measurement Uncertainty Andrews, R. P. 895-900 CN014996317
ASME Biennial 1995 Regularization of Some One-Dimensional Inverse Problems for Identification of Nonlinear Surface Phenomena Groetsch, C. W.; Hanke, M. 903-908 CN014996322
ASME Biennial 1995 The Landweber Iteration for an Inverse Scattering Problem Hanke, M.; Hettlich, F.; Scherzer, O. 909-916 CN014996338
ASME Biennial 1995 Efficient Numerical Solution of Inverse Heat Conduction Problems Reinhardt, H.-J.; Dinh Nho Hao 917-922 CN014996343
ASME Biennial 1995 Direct and Inverse Wave Propagation in the Frequency Domain via the Weyl Operator Symbol Calculus Fishman, L. 923-930 CN014996359
ASME Biennial 1995 Applications of Electrical Impedance Tomography to Nondestructive Evaluation Santosa, F. 931-938 CN014996364
ASME Biennial 1995 Least Squares Estimation of Hydraulic Conductivity From Field Data Bailey, K. R.; Fitzpatrick, B. G.; Jeffris, M. A. 939-946 CN014996370
ASME Biennial 1995 An Operator-Adjoint Approach to Electrical Impedance Tomography Wade, J. G. 947-954 CN014996385
ASME Biennial 1995 On the Local Regularization of Inverse Problems of Volterra Type Lamm, P. K. 955-962 CN014996390
ASME Biennial 1995 Parameter Estimation for an Imperfectly Clamped Plate: Numerical Examples Banks, H. T.; Smith, R. C.; Wang, Y. 963-972 CN014996408
ASME Biennial 1995 Identification of Forces in Vibrating Plates by Pointwise and Line Observations: Uniqueness and Stability Yamamoto, M. 973-978 CN014996413
ASME Biennial 1995 Determination of Modal Residues and Residual Flexibility for Time-Domain System Realization Alvin, K. F.; Peterson, L. D. 979-986 CN014996429
ASME Biennial 1995 Elastic Impedance Tomography Nakamura, G.; Uhlmann, G. 987-992 CN014996434
ASME Biennial 1995 Parameter Estimation of Flexible One-Link Manipulator Using B-Spline Approximations Kojima, F. 993-998 CN014996440
ASME Biennial 1995 Convergence and Large Division in a Bayesian Approach to Functional Estimation Problems Fitzpatrick, B. G.; Yin, G. 999-1004 CN014996455
ASME Biennial 1995 A Bounded Variation Approach to Inverse Interferometry Pitzpatrick, B. G.; Keeling, S. L.; Rock, S. G. 1005-1008 CN014996460
ASME Biennial 1995 Fast Total Variation-Based Image Reconstruction Vogel, C. R.; Oman, M. E. 1009-1016 CN014996476
ASME Biennial 1995 Nonsmooth Optimization Method for Image Resoration Ito, K.; Kunisch, K. 1017-1022 CN014996481
ASME Biennial 1995 Stability and Resolution in Thermal Imaging Bryan, K.; Caudill, L. F. 1023-1032 CN014996497
ASME Biennial 1995 Estimating the Interaction Kernel in a Mathematical Model for a Beam With Internal Damping Mechanism Lin, T.; Russell, D. L. 1033-1042 CN014996504
ASME Biennial 1995 One Line Estimation of Stiffness in Nonlinear Beam Models With Piezoceramic Actuators Demetriou, M. A.; Fitzpatrick, B. G. 1043-1050 CN014996510
ASME Biennial 1995 Identification of the Polyharmonic Vibration From Combination With a Normal Random Noise by the Use of High-Order Moments of Instantaneous-Value Distribution Steinfwolf, A. 1051-1060 CN014996525
ASME Biennial 1995 Identification of Parameters in Hereditary Systems Hartung, F.; Turi, J.; Herdman, T. L. 1061-1066 CN014996530
ASME Biennial 1995 A Numerical Algorithm for Determining a Coefficient in an Elliptic Equation Lowe, B. D.; Rundell, W. R. 1067-1072 CN014996546
ASME Biennial 1995 Identification of Thermal and Hysteretic Response of SMA Embedded Flexible Rods Kurdila, A. J.; Webb, G. 1073-1082 CN014996551
ASME Biennial 1995 An Optimization Based Approach to Flow Matching for Burger's Equation With a Forcing Term Herdman, T. L.; Kang, K. 1083-1086 CN014996567
ASME Biennial 1995 A Symmetric Positive Definite Inverse Vibration Problem With Underdamped Modes Starek, L.; Inman, D. J.; Pilkey, D. F. 1089-1094 CN014996572
ASME Biennial 1995 Computer Simulation for Active Control of Vibration in Beam Structures Tanaka, M.; Matsumoto, T.; Huang, L. 1095-1102 CN014996588
ASME Biennial 1995 The Treatment of Systematic Errors in Model Updating Frishwell, M. I.; Mottershead, J. E.; Zhang, Y. 1103-1110 CN014996593
ASME Biennial 1995 An Efficient Approximated Algorithm for Balancing and Order Reduction of Lightly Damped Systems Halevi, Y. 1111-1118 CN014996600
ASME Biennial 1995 Identification of Vehicle-Bridge Interactive Forces From Measured Bridge Responses: Theoretical Studies Law, S. S.; Chan, T. H. T.; Zeng, Q. H. 1119-1126 CN014996616
ASME Biennial 1995 Experimental Identification of Structural Damage by Neural Networks Ceravolo, R.; De Stefano, A.; Grosjacques, M.; Sabia, D. 1127-1134 CN014996621
ASME Biennial 1995 On the Inverse Multiplicative Eigenvalue Problem With an Engineering Application Sivan, D. D.; Ram, Y. M. 1135-1142 CN014996637
ASME Biennial 1995 Model Verification and Validation in Engineering: Updating of Mathematical Models by the Use of Test Data Guenter Natke, H. 1145-1156 CN014996642
ASME Biennial 1995 New Approaches for Identifying Structural Models Cogan, S.; Lallement, G.; Sanseigne, L. 1157-1162 CN014996658
ASME Biennial 1997 Unified approach of active panel vibration and flutter controls using piezoelectric actuation and iterative root locus method Ming T. Ho, Kulicke & Soffa Industries, Inc., Roger R. Chen, Old Dominion University, Li C. Chu, C&C Technologies, Inc. DETC97/VIB-3780
ASME Biennial 1997 Robust passive-active mounts for machinery and equipment J. Hannsen Su, Naval Surface Warfare Center DETC97/VIB-3774
ASME Biennial 1997 Vibration control of a distributed axially moving string using two actuators M. S. de Queiroz, D. M. Dawson, Chris D. Rahn, F. Zhang, Clemson University DETC97/VIB-3781
ASME Biennial 1997 Characteristics of Enhanced Active Constrained Layer Damping Treatments With Edge Elements: Part I: Finite Element Model Development and Validation W. H., Liao, Kon-Well, Wang, The Pennsylvania State University DETC97/VIB-3778
ASME Biennial 1997 Characteristics of Enhanced Active Constrained Layer Damping Treatments With Edge Elements: Part II — System Analysis W. H., Liao, Kon-Well, Wang, The Pennsylvania State University DETC97/VIB-4172
ASME Biennial 1997 Revisiting Hrovat's semi-active tuned mass damper Jeffrey L., Kuehn, Gregory D., Brock, William N., Patten, University of Oklahoma DETC97/VIB-3786
ASME Biennial 1997 Experimental performance of a MR fluid damper Dan, Kroushl, Amy, Nesbit, Jin Kyoo, Lee, Roy D., Marangoni, William W., Clark, Darrin, Schwartz, Pradeep P., PhulÈ, University of Pittsburgh DETC97/VIB-3776
ASME Biennial 1997 Semi-active modal response control approach for linear mechanical and structural systems Jeffrey Hayen, Southwestern Oregon Community College DETC97/VIB-3782
ASME Biennial 1997 Reduction of ship vibration by the dynamic absorber Wen-Jeng Hsueh, National Taiwan University DETC97/VIB-3787
ASME Biennial 1997 Adaptive LMS model-following control applied inside a closed loop Bradley R., Smith, H.H., Robertshaw, Virginia Polytechnic Institute and State University DETC97/VIB-3783
ASME Biennial 1997 Robust tracking for uncertain flexible structures using mixed time-optimal and sliding mode control Nader Jalili, Nejat Olgac, University of Connecticut DETC97/VIB-3777
ASME Biennial 1997 A neural network design methodology for structural control G. S. Lee, Shih-Ming Yang, National Cheng Kung University DETC97/VIB-3775
ASME Biennial 1997 Performance comparison between vibration control by confinement and conventional control Daryoush Allaei, QRDC DETC97/VIB-3785
ASME Biennial 1997 Analytical Investigation on elastodynamic vibration suppression of a flexible four-bar mechanism system featuring a smart coupler link and multivariable optimal regulator Muhammad Sannah, JLG Industries, Inc., Ahmad Smaili, Tennessee Technological University DETC97/VIB-3779
ASME Biennial 1997 Microdynamic model and control of a hub-appendage type system Chen Hsieh, Jong-Ching Lin, National Cheng Kung University DETC97/VIB-3784
ASME Biennial 1997 Passive vibration and noise control of a fuselage with the floor effect Yii-Mei Huang, KuoWen Dai, National Central University DETC97/VIB-3788
ASME Biennial 1997 Mathematical model of a buckled spring applied for vehicle active suspension Shiping Yao, Colin Morgan, Nigel J. Leighton, Wolverhampton University DETC97/VIB-4160
ASME Biennial 1997 Adaptive Noise Cancellation in an Acoustic Duct Foued Ben-Amara, Pierre T. Kabamba, A. Galip Ulsoy, The University of Michigan DETC97/VIB-3794
ASME Biennial 1997 Spatial Characteristics of Acoustic Boundary Control for Interior Noise Suppression S. M. Hirsch, Jian Qiao Sun, University of Delaware DETC97/VIB-3792
ASME Biennial 1997 Impedance Characteristics of Structural Acoustic Control J. Qiao, University of Delaware DETC97/VIB-3791
ASME Biennial 1997 Actively Silencing a Cavity by Acoustic Impedance Changes Oliver Lacour, D. Thenail, M. A. Galland, Ecole Centrale de Lyon DETC97/VIB-3795
ASME Biennial 1997 Minimization of Radiated Sound Power from Vibrating Shells by Optimal Placement of Lumped Masses Ashok D. Belegundu, G. H. Koopmann, E. W. Constans, The Pennsylvania State University DETC97/VIB-3798
ASME Biennial 1997 Surface Topography and Noise Emission In Gearboxes Naser Amini, B. G. RosÈn, Chalmers University of Technology DETC97/VIB-3790
ASME Biennial 1997 Optimization of Noise and Vibration of a Cylindrical Cam Mechanism Using Inertial Compensation Techniques Song-Lin Ge, Universita di Firenze DETC97/VIB-3789
ASME Biennial 1997 Quantitative Identification of Vehicle Rattle Sources Using CAE and Experimental Tools Jen Her, Shang-Rou Hsieh, Ford Motor Company, J.A. Moore, Noise and Vibration Consultant DETC97/VIB-3797
ASME Biennial 1997 Acoustic Double Holography Method and its Application to Engine Noise Research Mitsuo Nakano, Isuzu Advanced Engineering Center, Ltd., Masao Nagamatsu, Kohei Suzuki, Takuya Yoshimura, Tokyo Metropolitan University DETC97/VIB-3799
ASME Biennial 1997 Active Noise Control with the Active Muffler in Automotive Exhaust System Jae-Eung Oh, Hanyang University DETC97/VIB-3796
ASME Biennial 1997 Modeling and Feedback Control of Flexible Plate with Focus on the Modes Highly Coupled to Radiation Field M. Z. Ren, K. Seto and F. Doi DETC97/VIB-3811
ASME Biennial 1997 Sliding Mode Control with Pre-filter for Spillover and Chattering Suppression T. Ito and K. Nonami DETC97/VIB-3812
ASME Biennial 1997 Solving Vibration Control Problems using Reduced Order Models for Flexible Structures - A Genetic Algorithm approach. S. Kundu, K. Kamagata, S. Sugino, T. Minowa, and K. Seto DETC97/VIB-3817
ASME Biennial 1997 LMI Based Controller Design for a Bridge Tower under Construction I. N. Kar, K. Seto and F. Doi DETC97/VIB-3810
ASME Biennial 1997 Fuzzy Changing Stiffness Control of the Unstable Vibration of a Centrifuge Rotor Y. Yuan, S.Y. Liu and B.C. Wen DETC97/VIB-3813
ASME Biennial 1997 Order Reduction of Controller Based on LMIs Improving Error Bound R. Saragih and K. Yoshida DETC97/VIB-3819
ASME Biennial 1997 Fuzzy Logic Control of Time Periodic Mechanical Systems D. Boghiu, S.C Sinha and D.B. Marghitu DETC97/VIB-3830
ASME Biennial 1997 Self-Compensating Control for Suppression of Rotational Speed Variation Excited by Reduction Gear Mechanism M. Itoh, S. Kasei and S. Fukuda DETC97/VIB-3801
ASME Biennial 1997 Tunable Torsional Vibration Absorber: The Centrifugal Delayed Resonator M. Hosek, H. Elmali and N. Olgac DETC97/VIB-3829
ASME Biennial 1997 Regenerative Damper with an Optimally Tuned Resonant Circuit Y. Okada, J. Yonemura and M. Shibata DETC97/VIB-3804
ASME Biennial 1997 Virtual Auxiliary Mass as Hybridization Effects of Dynamic Vibration Absorber O. Nishihara, M. Yasuda and H. Matsuhisa DETC97/VIB-3807
ASME Biennial 1997 Application of Dynamic Vibration Absorbers to Mass Measurement T. Mizuno DETC97/VIB-3803
ASME Biennial 1997 Control Performance of Hadamard Weighted H2 Controller for Multiple-Input Structure System T. Watanabe DETC97/VIB-3818
ASME Biennial 1997 High Performance Damping with a Semi-Active Spring James E. Bobrow DETC97/VIB-3826
ASME Biennial 1997 Active Vibration Isolation Control for A Multi-Degree-Of-Freedom Structure with Uncertainties of Its Base H. Nishimura and A. Kojima DETC97/VIB-3800
ASME Biennial 1997 Vibration Reduction and Isolation by ON-OFF Control of Friction Force at Spring Support H. Yamaguchi, M. Yashima and Y. Hirayama DETC97/VIB-3802
ASME Biennial 1997 On an Improvement of Hybrid Vibration Isolation System K. Mizutani, Y. Fujita and R. Ikeura DETC97/VIB-3805
ASME Biennial 1997 Semi-Active Vibration Isolation Control Using Feedforward Information of Disturbance S. Yoshida and K. Yoshida DETC97/VIB-3820
ASME Biennial 1997 Vibration Control of a Self-Standing Quadrupedal Robot with YT-Mechanisms for Stable Yoshihiro Takita DETC97/VIB-3806
ASME Biennial 1997 Self-motion Utilization for Reducing Vibration of Structurally Flexible Redundant Robot Manipulators S. J. Kim and Y. S. Park DETC97/VIB-4130
ASME Biennial 1997 Actuator Selection for Vibration Control with Control Energy Constraints H. Doki, K. Hiramoto and R. E. Skelton DETC97/VIB-3832
ASME Biennial 1997 Modeling and Active Vibration Control with Robustness for Bridge Tower Structures under Construction K. Seto, F. Doi and M. Ren DETC97/VIB-3808
ASME Biennial 1997 Structural Vibration Control for Bridge Towers and Its Effect under Wind Excitation using a Wind Tunnel F. Doi, K. Seto, Y. Gatade and M. Ren DETC97/VIB-3809
ASME Biennial 1997 Active Vibration Control of Bridge Tower under Construction T. Tamaki, H. Kagaya, F. Sasaki, K. Ogawa, Y. Nishi, M. Sasaki and K. Yamaguchi DETC97/VIB-3822
ASME Biennial 1997 Analytical studies of shape memory alloy dampers for structural control of base isolated bridges Krzysztof Wilde, Paolo Gardoni and Yozo Fujino DETC97/VIB-3824
ASME Biennial 1997 A Semi-Active Modal Response Control Approach for Linear Mechanical or Structural Systems J.C. Hayen and W.D. Iwan DETC97/VIB-3827
ASME Biennial 1997 Vibration Control by Active Tuned Liquid Damper using Magnetic Fluid M. Abe, Y. Fujino and Y. Sano DETC97/VIB-3825
ASME Biennial 1997 Self-Regulating Variable Oil Damper for Structural Response Control H. Kurino and T. Kobori DETC97/VIB-3815
ASME Biennial 1997 Seismic Response Reduction Using Magnetorheological Dampers B.F. Spencer, Jr., S.J. Dyke, M.K. Sain and J.D. Carlson DETC97/VIB-3828
ASME Biennial 1997 Development and Testing of Variable Gain Control Algorithms for Seismic Response Control of a Full-Scale Frame Structure Hirokazu Iemura, Akira Igarashi, Yutaka Inoue and Mitsuo Sakamoto DETC97/VIB-3823
ASME Biennial 1997 Development of an Active Mass Damper for Stabilizing the Load Suspended on a Floating Crane I. Iwasaki, K. Tanida, S. Kaji, M. Mutaguchi and T. Murata DETC97/VIB-3816
ASME Biennial 1997 A Method for Large Scale Structural-Acoustic Analysis Koki Shiohata, K. Nemoto, Hitachi, Limited, T. Iwatsubo, Kobe University DETC97/VIB-3834
ASME Biennial 1997 Computational Issues in Damping Identification for Large Scale Problems Deborah F. Pilkey, Virginia Tech, Kevin P. Roe, Institute of Computer Applications in Science & Engineering, Daniel J. Inman, Virginia Tech DETC97/VIB-3835
ASME Biennial 1997 Efficient Structural Acoustic Analysis Using Finite and Infinite Elements and Parallel Processing Architectures Stewart W. Moore, Henno Allik, BBN Systems and Technologies DETC97/VIB-3836
ASME Biennial 1997 Computation of Nonlinear Response of Hydraulically Actuated Structures D. Burton, Texas Tech University, P. Baker, Y. Lew, Battelle Pacific Northwest Laboratories DETC97/VIB-3837
ASME Biennial 1997 Comparison of Refined Beam Theory and FEM for Piezo-Actuated Structures Wolfgang E. Seemann, Kai Wolf, Peter Hagedorn, Darmstadt University of Technology DETC97/VIB-3838
ASME Biennial 1997 Thickness-Optimization of Piezoceramic Transducers for Energy Transfer Kai Wolf, Stephan Frese, Peter Hagedorn, Wolfgang Seemann, Darmstadt University of Technology DETC97/VIB-3839
ASME Biennial 1997 Finite Element Methods for the Radiation of Ultrasonic Phased Arrays Into an Acoustic Medium Karl Grosh, John M. Dodson, Yuan Lin, University of Michigan DETC97/VIB-3840
ASME Biennial 1997 Implementation of Non-Reflecting Boundaries in a Space-Time Finite Element Method for Structural Acoustics Lonny L. Thompson, Clemson University DETC97/VIB-3841
ASME Biennial 1997 Nonlinear Wave Propagation in Elastic Submerged Cables M. Behbahani-Nejad, Noel C. Perkins, University of Michigan DETC97/VIB-3842
ASME Biennial 1997 Closed Form Transient Response of One-Dimensional Continua Xuqiang Wu, Bingen Yang, University of Southern California DETC97/VIB-3843
ASME Biennial 1997 An Analysis of a Friction Damped System Using Two Component Mode Methods E. Pesheck, Christophe Pierre, University of Michigan DETC97/VIB-3844
ASME Biennial 1997 Analysis of Dynamic Force Between Teeth Walls in Scroll Compressors by Elastic Contact Modelling Takayuki Suzuki, Kazuhiro Sato, Mitsubishi Heavy Industries, Ltd. DETC97/VIB3845
ASME Biennial 1997 Two-Dimensional Gas Pulsation Modeling of Thin Shell Type Gas Cavities With Special Attention to Active Pulsation Cancellation Peter C.-C. Lai, Copeland Corp., Werner Soedel, Purdue University DETC97/VIB-3847
ASME Biennial 1997 Analysis of Acoustical Properties of a Gear Mechanism Evgueni I. Podzharov, University of Panamericana DETC97/VIB-3848
ASME Biennial 1997 Experimental and Numerical Studies of Friction-Induced Oscillations of a Pin-on-Disk Apparatus W. Tworzydlo and O.N. Hamzeh, The Computational Mechanics Company, Inc., W. Zaton and Tom Judek, ORTECH Corporation, Heather Loftus, Ford Motor Company DETC97/VIB-3903
ASME Biennial 1997 Friction Induced Vibrations: Experiments Modelling and Analysis, Nikolaus Hinrichs, Marcus Oestreich, and Karl Popp, University of Hannover DETC97/VIB-3908
ASME Biennial 1997 Periodic Response of Front End Accessory Drives with Dry Friction M.J. Leamy and Noel Perkins, University of Michigan DETC97/VIB-3912
ASME Biennial 1997 Analysis of Stick-Slip Motion in Coulomb Damped Systems Using Variable Structure System Theory Aldo Ferri and Bonnie S. Heck, Georgia Tech DETC97/VIB-3915
ASME Biennial 1997 Phase Space Interpretation and Stability Analysis of a Self Excited Friction Damped Turbine Airfoil, E. Pesheck, and Christophe Pierre, University of Michigan DETC97/VIB-3913
ASME Biennial 1997 Effect of Dynamic Shear Force on Fastener Loosening in Assemblies Yubo Dong and Daniel Hess, University of South Florida DETC97/VIB-3904
ASME Biennial 1997 Periodic Optimal Control of Dampers Prakash S. Kasturi and Pierre E. Dupont, Boston University DETC97/VIB-3910
ASME Biennial 1997 Analytical and Experimental Investigation of an Impact Oscillator M. Oestreich, N. Hinrichs, and K. Popp, University of Hannover, and C.J. Budd, University of Bath DETC97/VIB-3907
ASME Biennial 1997 Dynamic Analysis of Nonlinear Rotor Systems Using Floquet Methods Dan Marghitu and George T. Flowers, Auburn University DETC97/VIB-3909
ASME Biennial 1997 Micro-Scale Simulation of Adhesive Effects During Normal Impact Jeffrey Streator, Georgia Tech DETC97/VIB-3914
ASME Biennial 1997 In-Plane Stick-Slip Vibration on the Surface of a Flexible Disc Clamped Between Elastic Sliders H. Ouyang and J.E. Mottershead, University of Liverpool, M.P. Cartmell, University of Edinburgh, M.I. Friswell, University of Wales DETC97/VIB-3906
ASME Biennial 1997 Dynamics of a Vibratory Feeder Peter Wolfsteiner and Friedrich Pfeiffer, TU- Munchen DETC97/VIB-3905
ASME Biennial 1997 Optimization of Noise and Vibration of a Cylindrical Cam Mechanism Using Inertial Compensation Techniques Song-Lin Ge, G. Nerli, and M. Carfagni, Universita di Firenze DETC97/VIB-3911
ASME Biennial 1997 Vibroacoustic Source Identification From Measured Structure Response and Resolution of the Inverse Problem, Charles H. Pezerat, INSA DETC97/VIB-3917
ASME Biennial 1997 Influence of Internal Structures of High Modal Density on the Shell's Radiation Lionel Oddo, INSA DETC97/VIB-3916
ASME Biennial 1997 Applications of the Causality Condition to Acoustic Reflections J. Gregory McDaniel, Boston University DETC97/VIB-4133
ASME Biennial 1997 Acoustic radiation modes on a partially excited surface Pei-Tai Chen, National Taiwan Ocean University DETC97/VIB-3918
ASME Biennial 1997 Modified Geometrical Acoustics Behavior Exhibited by Computations for Hemi-Capped Cylinders in the Mid-Frequency Range Jerry H. Ginsberg, Georgia Institute of Technology DETC97/VIB-4134
ASME Biennial 1997 Friction Phenomena Related to Drum Brake Squeal Instabilities Johan O. Hultén, Chalmers University of Technology, Gothenburg, Sweden DETC97/VIB-4161
ASME Biennial 1997 Investigation of Stick-Slip Phenomenon Using a Two-Disk Friction Model Henric Larsson, Kambiz Farhang, Southern Illinois University, Carbondale DETC97/VIB-4162
ASME Biennial 1997 Perturbation Analysis of Nonlinear Squeal Vibrations in Aircraft Braking Systems James T. Gordon, The Boeing Company DETC97/VIB-4163
ASME Biennial 1997 Analysis of High Speed Disk Brake Judder Helena Jacobsson, Chalmers University of Technology, Yasir S. Zargar, Kambiz Farhang, Southern Illinois University, Carbondale DETC97/VIB4165
ASME Biennial 1997 An Algorithm for Systematic Generation of Subscales With Appplication to a Two-Disk Friction System Kambiz Farhang, Southern Illinois University at Carbondale DETC97/VIB4166
ASME Biennial 1997 Interrelation of Self-Excited Friction Vibrations with Thermal Processes in Brakes Feodor R. Gekker, Bauman State Technical University, Avtandil V. Chichinadze, Institute Engineering RAN, Serik I. Khairaliev, Semipalatinsk Technical University, Aleksey V. Suvorov, RUBIN Aerospace Corporation DETC97/VIB-4167
ASME Biennial 1997 Cavitation driven impact in a hydraulic piston pump - a theoretical and experimental investigation Bernhard Manhartsgruber, R. Scheidl, University of Linz DETC97/VIB-3921
ASME Biennial 1997 Dynamics of distributed impact dampers Melvin E. King, Guido Sandri, Boston University DETC97/VIB-3922
ASME Biennial 1997 Impact dynamics of a supercavitating underwater projectile Richard Rand, Cornell University, Rudra Pratap, Indian Institute of Science, Deepak Ramani, Cornell University, Jeffery Cipolla, Ivan Kirschner, Naval Underwater Weapons Center DETC97/VIB-3929
ASME Biennial 1997 Piecewise linear systems with time varying Sotirios Natsiavas, S. Thedossiades, Aristotle University DETC97/VIB-3926
ASME Biennial 1997 Analytic study of discreteness effects in a string resting on a periodic array of vibro-impact supports Gary D. Salenger, Alexander F. Vakakis, University of Illinois, Urbana-Champaign DETC97/VIB-3924
ASME Biennial 1997 Dynamic responses of a cylindrical shell subjected to shock wave Zhong Weifang, Liu Zhongzu, Huazhong University of Science and Technology DETC97/VIB-3923
ASME Biennial 1997 Eigenstrain-based algorithm for viscoelastic uniaxial wave propagation due to impact Hans Irschik, Alexander K. Belyaev, Peter Raschl, Johannes Kepler University of Linz DETC97/VIB-3927
ASME Biennial 1997 Rattle reduction of automotive components: A FEM approach Shang-Rou Hsieh, Ford Motor Company, Steven W. Shaw, Michigan State University, Victor J. Borowski, Jen Yaun Her, Keith D. Moss, Ford Motor Company DETC97/VIB-3928
ASME Biennial 1997 Numerical and experimental studies of a rotating shaft-flywheel undergoing vibro-impacts Mohammed F. Abdul Azees, Alexander F. Vakakis, University of Illinois, Urbana-Champaign DETC97/VIB-3925
ASME Biennial 1997 Lighted-Induced Non-Contact Actuation and Control with Photostrictive Actua H. S. Tzou, University of Kentucky, B. J. Liu, Beijing Univ. of Aeronautics and Astronautics DETC97/VIB-3930
ASME Biennial 1997 Smart Material Control without Wire Leads or Electrodes: New Method and Dev John A. Main, University of Kentucky DETC97/VIB-3933
ASME Biennial 1997 Cyclic Deformation and Fatigue of a TiNi Shape-Memory Alloy Wire Subjected Bending H. Tobushi, T. Hachisuka, T. Hashimoto, S. Yamada, Aichi Institute of Technology DETC97/VIB-3934
ASME Biennial 1997 Adaptive Shells and Distributed Sensing/Control Characteristics H. S.,Tzou, Y. Bao, University of Kentucky, V. B. Venkayya, Wright-Patterson Air Force Base, H. Bahrami, Lexmark International Co. DETC97/VIB-3935
ASME Biennial 1997 Vibration Control of a Multi-Layer Piezoelectric Cylindrical Shell Jinhao Qiu, Junji Tani, Tohoku University DETC97/VIB-3936
ASME Biennial 1997 Actuator Placement in Smart Structures by Discrete-Continuos Optimization Ulrich Gabbert, I. Schulz, C.-T. Weber, University of Magdeburg DETC97/VIB-3937
ASME Biennial 1997 Control Effectiveness of Segmented Actautors Laminated on Ring-Shells R. Ye, T.G North America, H. Bahrami, Lexmark International, H. S. Tzou, University of Kentucky DETC97/VIB-3938
ASME Biennial 1997 On Experiments of Adaptive Control for Structure Vibration Kougen Ma, Fujun Peng, Zhongquan Gu, Xi Chen, Nanjing University of Aeronautics DETC97/VIB-3939
ASME Biennial 1997 Gain Scheduled Hyperplane Design for Sliding Mode Control via LMI Selim Sivrioglu, Kenzo Nonami, Chiba University DETC97/VIB-3940
ASME Biennial 1997 Optimal Tracking Servo-System by means of Sliding Mode Control Hiroaki Uchida, Kisarazu National College of Technology, Kenzo Nonami, Chiba University DETC97/VIB-3942
ASME Biennial 1997 Sliding Mode Control of Motion and Vibration without Sensors Osamu Ohnuki, Kenzo Nonami, Chiba University DETC97/VIB-3943
ASME Biennial 1997 Dynamic Vibration Absorber for a Ropeway Carrier Hiroshi Matsuhisa , Osamu Nishihara, Kyoto University DETC97/VIB-3944
ASME Biennial 1997 Precision Placement Analysis of Multi-DOF Endeffector via Finite Element Hassan Bahrami, Lexmark International Company, H. S. Tzou, University of Kentucky DETC97/VIB-3945
ASME Biennial 1997 Control System Design of Frequency-Feedback Magnetic Bearings Takeshi Mizuno, Kenji Araki, Saitama University, Hirotaka Namiki, Seiko Seiki Co., Ltd. DETC97/VIB-3947
ASME Biennial 1997 Realization of Controllers for DC and Vector Controlled Induction Motors Car Hisham Kashab, National Research Center, Electronics Research DETC97/VIB-3948
ASME Biennial 1997 Nonlinear Modes in Systems with Strong Nonlinearities Melvin E. King, Boston University DETC97/VIB-3949
ASME Biennial 1997 A Global Methodology For the Modal Reduction of Large Nonlinear Systems Containing Quadratic and Cubic Nonlinearities E. Pesheck, Christophe Pierre, University of Michigan DETC97/VIB-3952
ASME Biennial 1997 Modal Analysis of a Cracked Beam M. Chati, Richard H. Rand, S. Mukherjee, Cornell University DETC97/VIB-3950
ASME Biennial 1997 Nonlinear Normal Modes of Buckled Beams: Three-to-One and One-to-One Internal Resonances Ali H. Nayfeh, Walter Lacarbonara, Char-Ming Chin, Virginia Polytechnic Institute and State University DETC97/VIB-3957
ASME Biennial 1997 Interpreting Proper Orthogonal Modes in Vibrations B. F. Feeny, Michigan State University DETC97/VIB-3955
ASME Biennial 1997 Invariant Nonlinear Normal Mode Manifolds for Studying Localized and Chaotic Dynamics of an Array Composed of Stiff-Soft Elements Ioannis T. Georgiou, Naval Research Laboratory, Alexander F. Vakakis, University of Illinois, Urbana-Champaign DETC97/VIB-3954
ASME Biennial 1997 Nonlinear Localization in Systems of Tautochronic Vibration Absorbers Chang-Po Chao, Steven W. Shaw, Michigan State University DETC97/VIB-3956
ASME Biennial 1997 Mode Localization and Delocalization in Constrained Strings and Beams Chris H. Riedel, Chin An Tan, Wayne State University DETC97/VIB-3951
ASME Biennial 1997 Vibration Mode Localization in Randomly Disordered Weakly Coupled Two-Dimensional Systems Wei-Chau Xie, University of Waterloo DETC97/VIB-3953
ASME Biennial 1997 Some Recent Advances in Model Updating (Keynote) H. Gunther Natke, N. Cottin, M. Oeljeklause, University of Hannover DETC97/VIB-4142
ASME Biennial 1997 Generalised Reference Basis Model Updating in Structural Dynamics Rachel Kenigsbuch, Yoram Helevi, Technion - Israel Institute of Technology DETC97/VIB-4151
ASME Biennial 1997 Direct Estimation of Nonlinear Joint Parameters X.-N. Zhang, Xi'an Jiaotung University, C.-P. Fritzen, D. Jennewein, University of Siegen DETC97/VIB-4157
ASME Biennial 1997 An Introduction of Probability Theory to Model Updating Loukas Papadopoulos, Lockheed Martin Missiles and Space, Ephrahim Garcia, Vanderbilt University DETC97/VIB-4168
ASME Biennial 1997 Simultaneous Stiffness and Mass Change Detection Based on Reduced Measurements Menahem Baruch, Technion - Israel Institute of Technology DETC97/VIB-4143
ASME Biennial 1997 Damage Detection Based on Vibration Measurements and Inaccurate Models C.-P. Fritzen, D. Jennewein, University of Siegen, T. Kiefer, University of Kaiserslautern DETC97/VIB-4156
ASME Biennial 1997 Updating of Non-Conservative Systems using Measured Data Via Inverse Methods Ladislav Starek, Milos Musil, Slovak Technical University, Daniel J. Inman, Virginia Polytechnic Institute and State University DETC97/VIB-4158
ASME Biennial 1997 A Higher Order Error Matrix Method for Error Localization Michael Papadopoulos, The Aerospace Corporation, Ephrahim Garcia, Vanderbilt University DETC97/VIB-4169
ASME Biennial 1997 Evaluation of Different Strategies in the Parametric Identification of Dynamic Models Annalisa Fregolent, Walter D'Ambrogio, Universita di Roma "La Sapienza" DETC97/VIB-4154
ASME Biennial 1997 Updating Rotor-Bearing Finite Element Models Cristinel Mares, Politechnical University of Bucharest, Cecilia Surace, Politecnico di Torino DETC97/VIB-4155
ASME Biennial 1997 On Updating of Finite Element Model using Optimization Method Wolfgang G. Luber, Daimler-Benz Aerospace AG DETC97/VIB-4149
ASME Biennial 1997 A Singular Value Decomposition Method for Updating the Analytical Model Zhang Xianmin, Shantou University DETC97/VIB-4152
ASME Biennial 1997 Combining Subset Selection and Parameter Constraints in Model Updating J.E. Mottershead, H. Ahmadian, University of Liverpool DETC97/VIB-4147
ASME Biennial 1997 Automatic Selection of Parameters for Updating Procedures N. Imamovic, D. J. Ewins, Imperial College of Science, Technology and Medicine DETC97/VIB-4153
ASME Biennial 1997 Parameter Adaption With Automatically Selected Co-ordinates from Measured Eigenvectors: a Way to a Validated FE Model Manfred W. Zehn, Gerald Schmidt, Oliver Martin, Otto-von-Guericke-University of Magdeburg DETC97/VIB-4144
ASME Biennial 1997 Reliable Mode Shape Expansion Methods for Error Localisation and Model Updating Philippe Collignon, Jean-Claude Golinval, UniversitÈ de LiËge - LTAS DETC97/VIB-4145
ASME Biennial 1997 A Model Updating Method Based on the Concept of Frequency Shift Between Analytical and Experimental FRFs Rodrigo Pascual, Universidad de Concepcion, Jean-Claude Golinval, UniversitÈ de LiËge, M. Razeto, Universidad de Concepcion DETC97/VIB-4146
ASME Biennial 1997 The Influence of Experimental Errors on the Correction Parameters of Finite Element Models Stefan Keye, Institute of Aeroelasticity DETC97/VIB-4148
ASME Biennial 1997 Updating of Impact Models for Vibrating Cantilever Beams Dariusz Szwedowicz, Carlos A. Sotelo, National Centre for Research and Technological Development DETC97/VIB-4150
ASME Biennial 1997 Benefits of Model Updating: A Case Study Using the Micro-Precision Interferometer Testbed Sanjay S. Joshi, James W. Melody, Gregory W. Neat, Andrew Kissil,California Institute of Technology DETC97/VIB-4242
ASME Biennial 1997 Design of Pendulum Absorbers for Transverse Vibration Attenuation of Rotating Beams Yenkai Wang, The University of Michigan, Steven W. Shaw, Chang-Po Chao, Michigan State University DETC97/VIB-4182
ASME Biennial 1997 Prediction of Coupled Vibrations in Hard Disk Drive Spindle Systems Chong-Won Lee, KAIST, Huan-Suo Jia, KEPRI, Jeong-Hwan Seo, SAIT DETC97/VIB-4181
ASME Biennial 1997 Critical Speeds of Shaft-Disk Systems Subjected to Longitudinal Forces Lien-Wen Chen, Hong-Cheng Sheu, National Cheng Kung University DETC97/VIB-4183
ASME Biennial 1997 Dynamic Instability and Resonances of Geometrically Imperfect Plates Germain L. Ostiguy, Lyne St-Georges, Ecole Polytechnique DETC97/VIB-4186
ASME Biennial 1997 Lateral Vibration of a Consistent Continuous Cracked Beam Thomas G., Chondros University of Patras, Andrew D. Dimarogonas, Washington University, St. Louis, Jonathan Yao, Siemens Medical Laboratories DETC97/VIB-4180
ASME Biennial 1997 Stability of Ejected Beams Anthony Renshaw, Columbia University DETC97/VIB-4179
ASME Biennial 1997 Evaluation of Simplifying Assumptions in the Dynamics of Tethered Systems Monica Pasca, Universita di Roma La Sapienza DETC97/VIB-4178
ASME Biennial 1997 Self-Excited Vibration Model of DragonflyÌs Wing Based on the Concept of Bionic Design for Small- or Micro-Sized Actuators Sagiri Ishimoto, Hiromu Hashimoto, Tokai University DETC97/VIB-4185
ASME Biennial 1997 New Geometric Properties for Modeled Planar Vibration Pat Blanchet, Harvey Lipkin, Georgia Institute of Technology DETC97/VIB-4176
ASME Biennial 1997 Dynamic Response of Compliant Mechanisms Using the Pseudo-Rigid-Body Model Scott M. Lyon, Mark S. Evans, Paul A. Erickson, Larry L. Howell, Brigham Young University DETC97/VIB-4177
ASME Biennial 1997 Distortion Energy Based Design of Structures Under Random Excitations Mu-Tsang Chen, ANSYS Incorporated DETC97/VIB-4184
ASME Biennial 1997 Reduction of Vibrations in Complex Structures With Viscoelastic Neutralizers: A Generalized Approach and a Physical Realization J. J. de Espandola, Federal University of Santa Catarina, C. A. Bavastri, National University of Comahue DETC97/VIB-4187
ASME Biennial 1997 Mean Axis Conditions for Finite Elements Undergoing Large Rotations and Translations by Venkata R. Sonti, and O.P. Agrawal, Southern Illinois University at Carbondale DETC97/VIB-4188
ASME Biennial 1997 New Component Modes for Flexible Multibody Systems by O.Verlinden, P. Dehombreux, and C. Conti, Faculte Polytechnique de Mons, Belguim DETC97/VIB-4213
ASME Biennial 1997 Small Vibrations Superimposed on Non-Linear Rigid Body Motion by A.L. Schwab, and J.P. Meijaard, Delft University of Technology, The Netherlands DETC97/VIB-4204
ASME Biennial 1997 A Fully Symbolic Model of Multibody Systems Containing Flexible Plates by A. El Ouatouati, D.A. Johnson, and P. Fisette, Universite Catholique de Louvain, Belgium DETC97/VIB-4198
ASME Biennial 1997 Recursive Dynamics and Adaptive Control for Animating Articulated Figures by Evangelos Kokkevis and Dimitris Metaxas, University of Pennsylvania DETC97/VIB-4203
ASME Biennial 1997 Dynamics of Nonlinear Mechanical Systems and Virtual Reality - An Educational Tool for Engineering by I.F. Santos, A.P., Ferretti, and E. Schmidek, State University of Campinas, Brazil DETC97/VIB-4216
ASME Biennial 1997 Simulations of a Truck Driving on a Flexible Bridge by Olof Friberg, Peter Moller, Chalmers University of Technology, Sweden, and Boris Thorvald, Royal Institute ofTechnology, Sweden DETC97/VIB-4194
ASME Biennial 1997 Effect of Head-Supported Devices on the Human and Manikin Necks by H. Ashrafiuon, Villanova University, N. Alem, and . McEntire, U.S. Army Aeromedical Research Laboratory DETC97/VIB-4193
ASME Biennial 1997 Modelling of a Passenger Coach as Elastic Multibody System by J. Haug, Daimler Benz AG, Germany, and U. Piram, W. Schiehlen, and Th. Schirle, University of Stuttgart, Germany DETC97/VIB-4225
ASME Biennial 1997 Mass Transfer Influence on the Rollover Threshold for a Vehicle with Nonlinear Suspension by Oscar Gonzalez-Brambila and Juan Carlos Jauregui, CIATEQ, Unidad Aguascalientes, Mexico DETC97/VIB-4389
ASME Biennial 1997 An Approach for the Dynamics of Robotic Manipulators with Structural Flexibility of Links and Joints by J. Kovecses, R.G. Fenton, and W.L. Cleghorn, University of Toronto DETC97/VIB-4217
ASME Biennial 1997 Controlling a Dynamic System with Open and Closed Loops: Application to Ladder Climbing by anzen Lo, Dimitris Metaxas, and Norman I. Badler, University of Pennsylvania DETC97/VIB-4224
ASME Biennial 1997 Modeling a Robot with Flexible Joints and Decoupling its Equations of Motion by A.Meghdari, and F. Fahimi, Sharif University of Technology, Iran DETC97/VIB-4209
ASME Biennial 1997 Dynamic Modeling of the Three-Degrees of Freedom Planar Platfor-Type Manipulator by Maher G. Mohamed, El-Minia University, Egypt, and Hazem A. Attia, Cairo University, Egypt DETC97/VIB-4192
ASME Biennial 1997 Computational Schemes for Nonlinear Elastic Multi-Body Systems by O.A. Bauchau, Georgia Institute of Technology DETC97/VIB-4196
ASME Biennial 1997 Absolute Nodal Coordinate Formulation by A. A. Shabana, and H. Hussien University of Illinois at Chicago; and J. L. Escalona, University of Seville, Spain DETC97/VIB-4227
ASME Biennial 1997 A Strategy to Accelerate the Numerical Integration in the DynamicSimulation of Multibody Systems by Jesus Cardenal, Javier Cuadrado, and Eduardo Bayo, University of La Coruna, Spain DETC97/VIB-4228
ASME Biennial 1997 A Study on the Simulation of Flexible Link Mechanics Based on FEM by Koichi Honke, Yoshio Inoue, Eiko Hirooka, and Naoki Sugano, Kobe Steel, Ltd., Japan DETC97/VIB-4210
ASME Biennial 1997 Numerical Solution of Stiff ODEs and DAEs in Mechanical and Other Systems by H. Pasic, Ohio University DETC97/VIB-4220
ASME Biennial 1997 Parallel O(log2 N) Algorithm for the Motion Simulation of General Multi-Rigid-Body Mechanical Systems by Kurt S. Anderson, Rensselaer Polytechnic Institute DETC97/VIB-4226
ASME Biennial 1997 A Theoreti cal and Experimental Study of the Impact of Joint Models on Vibration Prediction for a High-Precision Optical Positioning Table by Ipek Basdogan, Thomas, J. Royston, University of Illinois at Chicago, Juan Barraza, Deming Shu, and Tuncer M. Kuzay,Argonne National Laboratory DETC97/VIB-4215
ASME Biennial 1997 On the Use of Virtual Work in a Graph-Theoretic Formulation for Multibody Dynamics by Pengfei Shi and John McPhee, University of Waterloo DETC97/VIB-4199
ASME Biennial 1997 Recovery of Joint Reaction Force for Real-Time Recursive Multibody Dynamics by Fuh-Feng Tsai, and Masoud Mirtaheri, United Defense LP, PA DETC97/VIB-4218
ASME Biennial 1997 Dynamic Analysis of Multibody Rotor-Bearing Systems by M.A. Mohiuddin and Y.A. Khulief, King Fahd University of Petroleum & Minerals, Saudi Arabia DETC97/VIB-4205
ASME Biennial 1997 New Numerical Method for the Dynamic Analysis of Impact Loads in Flexible Beams by J.L. Escalona, J. Mayo, and J. Dominguez, University of Seville, Spain DETC97/VIB-4207
ASME Biennial 1997 Effect of Flexibility in Transverse Impact Problems by Ahmet S. Yigit, and Andreas P. Christoforou, Kuwait University, Kuwait DETC97/VIB-4208
ASME Biennial 1997 Impact Analysis of Flexible Multi-Armed Terrestrial Robots by E.M. Bakr, University of Bahrain, Bahrain DETC97/VIB-4214
ASME Biennial 1997 Effect of the Gravity Forces on the Propagation of a Rotating Flexible Rod after Impact by Wei-Hsin Gau, Huafan Institute of Technology, Taiwan DETC97/VIB-4219
ASME Biennial 1997 Prediction of Modal Characteristics Due to Design Change by Tong Y. Yi, and Parviz E. Nikravesh, University of Arizona DETC97/VIB-4190
ASME Biennial 1997 A General Method of Multibody System Motion Optimization by Evtim Zakhariev, Bulgarian Academy of Science, Bulgaria DETC97/VIB-4195
ASME Biennial 1997 Parameter Identification for Multibody Dynamic Systems by Radu Serban, Jeffrey S. Freeman, and Dan Negrut, University of Iowa DETC97/VIB-4211
ASME Biennial 1997 Reduction of Forced Vibration Response by Optimum Balance of Linkage and Optimum Design of System by She-min Zhang, Nobuyo shi, and Takao Torii, Shizuoka University, Japan DETC97/VIB-4212
ASME Biennial 1997 Analaysis of Resonances and Instabilities in Elliptical Gear Systems by M.J. Lai, and A.A. Seireg, University of Wisconsin-Madison DETC97/VIB-4191
ASME Biennial 1997 Dynamics of CVT Chain Drives: Mechanical Model and Verification by J. Srnik and F. Pfeiffer, Technical University of Munich, Germany DETC97/VIB-4127
ASME Biennial 1997 Dynamic Modelling and Solution for a Transmission Mechanism with Flexible Support by Liu Hong-Zhao, Xian University of Technology, P.R. China, E.Appleton, University of Durham, UK, Zhang Shengning, Xian Research Institute of Heavy Machinery, P.R. China, Su Zhixiao, andCao Weiqing, Xian University of Technology, P.R. China DETC97/VIB-4200
ASME Biennial 1997 Harmonic and Transient Responses Analysis for a Transmission Mechanism with Flexible Support by Liu Hong-Zhao, Xian University of Technology, P.R. China, E.Appleton, University of Durham, UK, Zhang Shengning, Xian Research Instit ute of Heavy Machinery, P.R. China, Su Zhixiao, andCao Weiqing,Xian University of Technology,P.R. China DETC97/VIB-4201
ASME Biennial 1997 Fatigue Life Predictions by Coupling FEM and MBS Calculations by S. Dietz, H. Netter, and D. Sachau, German Aerospace Research Establishment, Germany DETC97/VIB-4229
ASME Biennial 1997 Testing Machines for Vibration Levels on a Test-Bed Mounting which is not Similar to the Application Mounting by S. Garvey, J. Penny, University of Aston, UK, M. Lau, Nanyang Technological University, Singapore, and C. Lewis, GEC Alsthom Large Machines, UK DETC97/VIB-4197
ASME Biennial 1997 Nonlinear Dynamic Performance Analysis of Elastic Linkage Mechanisms by Zhang Xianmin, Shantou University, People's Republic of China DETC97/VIB-4206
ASME Biennial 1997 Using Model Updating Technique to Train Neural Network for Fault Detection Vicente Lopes, Jr., UNICAMP, Joao Antonio Pereira, Hans Ingo Weber, UNESP, Ilha Solteira DETC97/VIB-4233
ASME Biennial 1997 Monitoring Fault Condition During Manufacturing Using the Karhunen-Loeve Transform Irem Y. Tumer, Kristin L. Wood, Ilene J. Busch-Vishniac, University of Texas, Austin DETC97/VIB-4234
ASME Biennial 1997 An Object-Oriented Machine Condition Monitoring Scheme for Rotating Machinery Bernhard P. Bettig, Arizona State University, Ray P. S. Han, University of Iowa DETC97/VIB-4235
ASME Biennial 1997 Fault Identification for Rotating Machinery Using Adaptive Signal Processing and Time-Frequency Analysis Sang-Kwon Lee, Paul R. White, University of Southampton DETC97/VIB-4236
ASME Biennial 1997 Novel Speed and Position Estimation in Field-Oriented Control of Induction Machine Drive System Faeka Khater, Electronics Research Institute DETC97/VIB-4501
ASME Biennial 1997 The Effects of Noise on Measured Ritz Vectors David C. Zimmerman, University of Houston, Timothy T. Cao, NASA Johnson Space Center DETC97/VIB-4230
ASME Biennial 1997 Experiments for Damage Location and Damping Identification Suzanne Weaver Smith, University of Kentucky, David C. Zimmerman, Theodore J. Bartkowicz, Hyoung M. Kim, University of Houston DETC97/VIB-4231
ASME Biennial 1997 Damage Location and Inflated Rigidized Structures John A. Main, Suzanne Weaver Smith, Alexander L. Chapman, Kenneth Patrick Hobbs, Jr., University of Kentucky DETC97/VIB-4232
ASME Biennial 1997 Fatigue Life Analysis Using Linear Transient Dynamics Liping Huang, Engineering Analysis Services Incorporated, Hari Agrawal, Ford Motor Company DETC97/VIB-4237
ASME Biennial 1997 Analyses of Dynamic Stress Response in Structural Vibration Liping Huang, Engineering Analysis Services Incorporated DETC97/VIB-4238
ASME Biennial 1997 Frequency Domain System Identification with Instrumental Variable Based Subspace Algorithm Tomas McKelvey, Link–ping University DETC97/VIB-4252
ASME Biennial 1997 Errors in Variables Identification Techniques Applied to Modal Analysis Patrick Guillaume, Vrije Universiteit Brussel (VUB) DETC97/VIB-4253
ASME Biennial 1997 Numerical Algorithms for Subspace State Space System Identification (N4SID) Peter Van Overschee, Bart De Moor, Wouter Favoreel, Katholieke Universiteit, Leuven DETC97/VIB-4254
ASME Biennial 1997 GARTEUR Group on Ground Vibration Testing - Results from the Test of a Single Structure by 12 Laboratories in Europe Etienne BalmËs, ONERA, Jan R. Wright, University of Manchester DETC97/VIB-4255
ASME Biennial 1997 Autonomous Modal Identification of the Space Shuttle Tail Rudder Richard S. Pappa, NASA Langley Research Center, George H. James, III, David C. Zimmerman, University of Houston DETC97/VIB-4250
ASME Biennial 1997 Identification of Systems and Estimation of Unknown Disturbances Minh Q. Phan, Neil E. Goodzeit, Princeton University, Jer-Nan Juang, NASA Langley Research Center DETC97/VIB-4256
ASME Biennial 1997 Development of Structural identification Accuracy indicators Using Fuzzy Logic Stanley E. Woodard, Richard S. Papa, NASA Langley Research Center DETC97/VIB-4258
ASME Biennial 1997 Flight-Test Requirements Definition using an Autonomous System Identification Algorithm Kenny, Elliott, NASA Langley Research Center DETC97/VIB-4257
ASME Biennial 1997 On Frequency Domain System Identification Eric Blades, SDRC, San Diego, CA, Roy Craig, Jr., University of Texas at Austin DETC97/VIB-4259
ASME Biennial 1997 Performance Assessment of Flexure Fixture for Payload Modal Survey Y. T. Chung, McDonnell Douglas Aerospace DETC97/VIB-4260
ASME Biennial 1997 The Development of an Enhanced Mode Indicator Function Parameter Estimation Algorithm William L. Fladung, Allyn W. Phillips, David L. Brown, University of Cincinnati DETC97/VIB-4261
ASME Biennial 1997 Model Correlation Issues in Residual Flexibility Testing Michael L. Tinker, NASA Marshall Space Flight Center, Malcolm A. Cutchins, Auburn University DETC97/VIB-4262
ASME Biennial 1997 Identifiability issues for parameter-varying and multidimensional linear systems Lawton H. Lee, Kameshwar Poolla, University of California, Berkeley DETC97/VIB-4240
ASME Biennial 1997 Parametric uncertainty models of flexible structures for robust Control Gregory Wolodkin, University of Minnesota DETC97/VIB-4241
ASME Biennial 1997 Multivariable relevant system identification of a wafer stepper system Raymond A. de Callafon, Paul M. J. Van den Hof, Delft University of Technology DETC97/VIB-4243
ASME Biennial 1997 Reduced order interval model for robust control Jiann-Shiun Lew, Tennessee State University, Kyong B. Lim, Langley Research Center DETC97/VIB-4244
ASME Biennial 1997 Frequency and Time Signal Analysis in Source Identification of Vibration and Noise in Cylindrical Cam Mechanisms Song-Lin Ge, Giovanni Nerli, Marco Pierini, Universitý degli Studi di Firenze DETC97/VIB-4249
ASME Biennial 1997 Experimental Validation and Modal Analysis for a Highway Bridge Jinghui Sun, Jiang Pang, Gang Song, William N. Patten, University of Oklahoma DETC97/VIB-4251
ASME Biennial 1997 A Method for Identification of Powerplant Joint Properties Using FRF Data and FEM Model Yukitaka Takahashi, Toshibumi Suzuki, Masayoshi Tsukahara, Honda R&D Co., Ltd. DETC97/VIB-4247
ASME Biennial 1997 A feedforward Correction Method for Multi-Sharker Excitation System in Sine Testing Izhak Bucher, Israel Institute of Technology - Technion DETC97/VIB-4245
ASME Biennial 1997 Analysis of Operating Deflection Shapes Based on Subspace Method Nobutaka Tsujiuchi, Yuichi Matsumura, Takayuki Koizumi, Doshisha University DETC97/VIB-4126
ASME Biennial 1997 Identification of Viscoelastic Properties of finite Element Structures with Joints Torsten Herrmann, Advanced Simulation Technologies, Valdas Chaika, ITT Automotive Europe GmbH DETC97/VIB-4246
ASME Biennial 1997 Transfer Path Analysis of A Vehicle Subframe: Measurements of Six Degrees of Freedom Lars Ivarsson, Chalmers University of Technology DETC97/VIB-4248
ASME Biennial 1997 Wavelet based edge detection for structural dynamics S.Patsias, W. J. Staszewski & G. R. Tomlinson, University of Sheffield VIB-4138
ASME Biennial 1997 Identification of fault signals in rotating machinery using higher order time-frequency analysis S. K. Lee & P. R. White, University of Southampton VIB-4137
ASME Biennial 1997 Deconvolution by wavelets for extracting impulse response functions F. J. V. de Moraes & H. I. Weber, State University of Campinas VIB-4136
ASME Biennial 1997 Wavelet novelty measure for machinery diagnostics W. J. Staszewski, University of Sheffield VIB-4140
ASME Biennial 1997 Motion detection for a precision positioning system by wavelet analysis Hung-Ming Tai & Cheng-Kuo Sung, National Tsing Hua University VIB-4139
ASME Biennial 1997 On the wavelet-analyzed seismic response of SDOF systems Biswajit Basu & Vinay K. Gupta, Indian Institute of Technology Kanpur VIB-4141
ASME Biennial 1997 Van der Pol Mode Stability via Hill's Equation Duane W. Storti, Per G. Reinhall, David M. Sliger, University of Washington DETC97/VIB-4020
ASME Biennial 1997 A Comparison of Analytical Methods for Studying a Single-DOF Nonlinear System Ramesh S. Guttalu, Henryk Flashner, University of Southern California DETC97/VIB-4023
ASME Biennial 1997 Parameter Excitation Effects in Gear Dynamics C. Nataraj, Alan M. Whitman, Villanova University DETC97/VIB-4018
ASME Biennial 1997 Combined-Mode Parametric Oscillations in Mechanical Systems Reiko Osada, Chikara Sato, Keio University DETC97/VIB-4008
ASME Biennial 1997 Oil Effect on the Dynamics of Compressor Suction Valve H. Ezzat Khalifa, Carrier Corporation DETC97/VIB-4029
ASME Biennial 1997 Nonlinear Regenerative Machine Tool Vibrations G bor StÈp n, Technical University of Budapest, Tamas Kalmar-Nagy, Cornell University DETC97/VIB-4021
ASME Biennial 1997 Dynamics of Two Coupled Van der Pol Oscillators with Delay Coupling Stephen Wirkus, Richard Rand, Cornell University DETC97/VIB-4019
ASME Biennial 1997 Real-Time Recursive Least-Squares Identification and Control of Lathe Chatter Shilong, Zhang, Karl B., Ousterhout, University of Arizona DETC97/VIB-3958
ASME Biennial 1997 Gear Crack Detection with the Wavelet Transform D. Boulahbal, M. F. Golnaraghi, F. Ismail, University of Waterloo DETC97/VIB-4009
ASME Biennial 1997 Friction Induced Vibrations in Aircraft Disk Brakes Lisle B. Hagler, Per G. Reinhall, University of Washington DETC97/VIB-4017
ASME Biennial 1997 Damping Tower like Structures by Dry Friction Friedrich Pfeiffer, Andreas Stiegelmeyr, Technische University of Munchen DETC97/VIB-4013
ASME Biennial 1997 Modification of the Craig-Bampton CMS Procedure for General Systems Bram de Kraker, Dick H. van Campen, Eindhoven University of Technology DETC97/VIB-4030
ASME Biennial 1997 Toward a Minimal Dynamic Model of a 6-DOF Parallel Robot L. Beji, M. Pascal, P. Joli, UniversitË d'Evry Val d'Essone DETC97/VIB-4024
ASME Biennial 1997 Nonlinear Nonplanar Dynamics of Parametrically Excited Cantilever Beams Haider N. Arafat, Ali H. Nayfeh, Char-Ming Chin, Virginia Polytechnic Institute and State University DETC97/VIB-4028
ASME Biennial 1997 Dynamic Response of a Spinning Timoshenko Shaft with Coupled Bending and Torsion Jean W. Zu, Edward Wong, University of Toronto DETC97/VIB-4026
ASME Biennial 1997 On Residual Vibration Control of a Time-Varying Redundant Open-Chain Linkage with Joint and Link Flexibility Yue Shigang, Beijing Polytechnic University DETC97/VIB-4016
ASME Biennial 1997 Feed-back Numerical Implementation of an Optimal Procedure for Chaos Control in a Two-Well Forced Oscillator Stefano Lenci, Universita di Ancona, Giuseppi Rega , Universita di Roma "La Sapienza" DETC97/VIB-4014
ASME Biennial 1997 Robustness of Time-Varying Systems Fritz Colonius, Universit”t Augsburg, Wolfgang Kliemann, Iowa State University DETC97/VIB-4025
ASME Biennial 1997 Using Phase Space Reconstruction to Track Parameter Drift in a Nonlinear System J. P. Cusumano, D. Chelidze, N. K. Hecht, Pennsylvania State University DETC97/VIB-4012
ASME Biennial 1997 Identification of Damping Characteristics Using Bispectral Analysis Ali H. Nayfeh M. R. Hajj, J. Fung, S. O' Fahey, Virginia Polytechnic Institute and State University DETC97/VIB-4407
ASME Biennial 1997 Optimal Control of Nonlinear Parametrically Excited BeamVibrations by Spatially Distributed Sensors and Actuators Andreas Kugi, Kurt Schlacher, Hans Irschik, Johannes Kepler Universitat of Linz DETC97/VIB-4171
ASME Biennial 1997 Experimental and Numerical Investigation of a Nonlinear Autoparametric System Alain Berlioz, RÈgis Dufour, Institut National des Sciences AppliquÈes de Lyon, Subhash C. Sinha, Auburn University DETC97/VIB-4027
ASME Biennial 1997 The Double Seesaw Oscillator in a Windfield; Theory and Experiments A.H.P. van der Burgh, B. W. van Oudheusden, Delft University of Technology DETC97/VIB-4015
ASME Biennial 1997 Dynamics of Pipes Containing Pulsative Flow Zsolt SzabÛ, Technical University of Budapest, S. C. Sinha, Auburn University, G bor StÈp n, Technical University of Budapest DETC97/VIB-4022
ASME Biennial 1997 An Experimental Investigation of a Cantilever Beam Excited by a Non-ideal Energy Source M. C. de Mattos, J. Balthazar, University of Campinas, S. Wieczorek, D. Mook, Virginia Polytechnic Institute and State University DETC97/VIB-4011
ASME Biennial 1997 Analysis Models for Torsional Vibraiton of Shaft Systems with Planetary Gearing Jinghui Sun, Lee Liu, and William N. Patten, University of Oklahoma DETC/VIB-4036
ASME Biennial 1997 A Comprehensive Torsional Vibration Analysis Procedure Part I Mark A. Corbo and Stanley B. Malanoski, Mechanical Technology Inc. DETC/VIB-4048
ASME Biennial 1997 A Comprehensive Torsional Vibration Analysis Procedure - Part II Mark A. Corbo and Stanley B. Malanoski, Mechanical Technology Inc. DETC/VIB-4173
ASME Biennial 1997 Dynamic Analysis of a Ramp-Roller Clutch Chin-Tzung Michael Chang and Ali Seireg, University of Florida DETC/VIB-4043
ASME Biennial 1997 The Estimation of Rotor Unbalance M. I. Friswell and A. W. Lees, University of Wales DETC/VIB-4039
ASME Biennial 1997 Whirl Speeds and Unbalanced Response of Rotor-Bearing Systems Using Finite Dynamic Methods Bo-Suk Yang, Hyung-Sub Hwang, and Sae-Kyoo Oh, Pukyong National University DETC/VIB-4056
ASME Biennial 1997 Influence of Bearing Alignment on Vibraiton of Multi-span Rotor Toshio Hirano and Tatsuo Yamashita, Toshiba Corporation DETC/VIB-4057
ASME Biennial 1997 PC-Based Nonlinear Dynamic Simulation and Animation of the Tilting Pad Guide Bearing in Large Hydro-Unit X. Z. Zhang, L. F. Ma, and Y. C. Zhao, Zhengzhou Research Institute of Mechanical Engineering DETC/VIB-4040
ASME Biennial 1997 Levitation and Torque Control of PM Synchronous and Induction Type Bearingless Motor Yohji Okada Shigenobu Miyamoto, Satoshi Ueno i, Tetsuo Ohishi, Ibaraki University, and C. C. Tan, Queensland University of Technology DETC/VIB-4032
ASME Biennial 1997 Experimental Investigation of Piezoelectrically Actuated Rotating Parts Feeder S. H. Chang and T. W. Yang, National Taiwan University DETC/VIB-4034
ASME Biennial 1997 Evaluation of AMB Turbomachinery Auxiliary Bearings R. G. Kirk, Virginia Polytechnic Institute and State University DETC/VIB-4059
ASME Biennial 1997 A Study on Electro-Magnetic Auto-balancing System and its Balancing Method Xi-xuan Wang and Sheng Zeng, Zhejiang University DETC/VIB-4053
ASME Biennial 1997 Vibration Analysis of High Speed Stepped Thrust Gas Film Bearings with Inertia Effects Masayuki Ochiai and Hiromu Hashimoto, Tokai University DETC/VIB-4047
ASME Biennial 1997 Static and Dynamic Analysis of Multileaf Foil Journal Bearings Considering Misalignment Effects D. Sudheer Kumar Reddy, S. Swarnamani and B. S. Prabhu, Indian Institute of Technology DETC/VIB-4052
ASME Biennial 1997 Design of Liquid Seals for Centrifugal Compressors Gordon Kirk, Virginia Polytechnic Institute and State University, and Sanjay K. Baheti, Kaydon Ring & Seal Inc DETC/VIB-4060
ASME Biennial 1997 Dynamics of Rotor/Bearing Systems with Flexible Rotor and Flexible Bearing Support Agnes Muszynska, Alex Petchenev, and Paul Goldman, Bently Rotor Dynamics Research Corporation DETC/VIB-4042
ASME Biennial 1997 Unidirectional Excitation Technique for Complex Modal Testing of Asymmetric Rotor Systems: Application to DTG Seok-Ku Lee, Daewoo Heavy Industries Ltd., and Chong-Won Lee, Korea Advanced Institute of Science and Technology DETC/VIB-4045
ASME Biennial 1997 Natural Frequencies of Stator in Induction Motors Isao Suzuki, Sinichi Noda, Fuminori Ishibashi, and Sadaaki Mori, Toshiba Mie-Works, and Kazunobu Itomi, Daido Inst. of Technology DETC/VIB-4049
ASME Biennial 1997 Experimental Investigation of Dynamic Nonlinearities in Rotating Machinery G. A. Horattas, M. L. Adams, M. A. Magied, and K. A. Loparo, Case Western Reserve University DETC/VIB-4061
ASME Biennial 1997 Spontaneous Sidebanding at Subharmonic Peaks of Rotordynamic Nonlinear Response Fredric Ehrich, Massachusetts Institute of Technology, and Marc Bertmillier, SNECMA DETC/VIB-4041
ASME Biennial 1997 Clearance Effects on Spiral Vibrations Due to Rubbing Dara W. Childs, Texas A&M University DETC/VIB-4058
ASME Biennial 1997 Rotor Instability Due to Coupled Effect of Lateral and Torsional Modes and Improper Bearing Design Yatao Zhang and Jari Nyqvist, ABB STAL DETC/VIB-4031
ASME Biennial 1997 Prevention of Low-Frequency Vibration of High-Capacity Steam Turbine Units H. Kanki, Kobe University, Y. Kaneko, M. Kurosawa, T. Yamamoto, Mitsubishi Heavy Industries, Ltd., Y. Yamamoto, Takasago Machinery Works, MHI, Ltd., and F. Ninomiya, Tokyo Electric Power Company DETC/VIB-4035
ASME Biennial 1997 Thermally Induced Synchronous Instability of a Radial Inflow Overhung Turbine Part I Henry Faulkner, Northern Research and Engineering Corp., W. F. Strong, Strong Technology Co., and R. Gordon Kirk, Virginia Tech. DETC/VIB-4063
ASME Biennial 1997 Thermally Induced Synchronous Instability of a Radial Inflow Overhung Turbine Part II Henry Faulkner, Northern Research and Engineering Corp., W. F. Strong, Strong Technology Co., and R. Gordon Kirk, Virginia Tech. DETC/VIB-4174
ASME Biennial 1997 Wave Propagation Analysis of an Axially Strained Rotating Timoshenko Shaft - Part I, B. Kang and C. A. Tan, Wayne State University DETC/VIB-4038
ASME Biennial 1997 Wave Propagation Analysis of an Axially Strained Rotating Timoshenko Shaft - Part II, B. Kang and C. A. Tan, Wayne State University DETC/VIB-4175
ASME Biennial 1997 Distributed Transfer Function Synthesis of Multi-body Flexible Rotor Systems Bingen Yang and H. Fang, University of Southern California DETC/VIB-4046
ASME Biennial 1997 Analysis of Fabricated Gear Wheels Using Cyclic Symmetry in a PC Environment A. Bhattacharya, S. Manjula, V. Ramamurti, Indian Institute of Technology DETC/VIB-4051
ASME Biennial 1997 Effect of Crack on the Natural Frequency of Rotating Twisted Blades Sumanta Neogy and V. Ramamurti, Indian Institute of Technology DETC/VIB-4050
ASME Biennial 1997 Gyroscopic Effects of a Vibrationally Isolated Rotating Disk and Shaft Donald L. Margolis, University of California, Davis DETC/VIB-4062
ASME Biennial 1997 Modal Analysis of a Rotating Shaft-Disk-Blades System with a Cracked Blade Ming-Chuan Wu and Shyh-Chin Huang, National Taiwan Institute of Technology DETC/VIB-4064
ASME Biennial 1997 Corriolis Effect on Mode Localisation of a Rotating Bladed Disk J. H. Kuang and B. W. Huang, National Sen Yat Sen University DETC/VIB-4065
ASME Biennial 1997 Analysis of Ball Bearing Vibrations Caused by Outer Race Waviness Koichiro Ono and Yohji Okada, Ibaraki University DETC/VIB-4033
ASME Biennial 1997 Dynamics of a Rotating System with a Nonlinear Eddy-Current Damper Yuri Kligerman and Oded Gottlieb, Technion - Israel Institute of Technology DETC/VIB-4054
ASME Biennial 1997 Vibrations: Noises Produced by Rotors and Eddy Current Probes The Tam Nguyen and Roland Bigret, Total Raffinage Distribution DETC/VIB-4055
ASME Biennial 1997 Analysis and Synthesis of Dynamic Response of a Flexibly Coupled Rotor Assembly Valdas Chaika, AVL LIST GmbH DETC/VIB-4066
ASME Biennial 1997 Suppression of Vibration in a Nonlinear Axially Moving String by the Boundary Control Shahram M. Shahruz, Berkeley Engineering Research Institute DETC97/VIB-4077
ASME Biennial 1997 Floating Slab Railway Track for Isolation of Vibration: Models of Infinite Length James A. Forrest , University of Cambridge DETC97/VIB-4085
ASME Biennial 1997 Free Vibration of a Whirling Rod Oliver M. O'Reilly, University of California, Berkeley, Jeffrey S. Turcotte, Wright-Patterson Airforce Base DETC97/VIB-4072
ASME Biennial 1997 A New Microslip Model for Bending Response and Hysteresis Loss of a Multiwire Strand C. V. Jayakumar, Crescent Engineering College, S. Sathikh, C. Jebaraj, Ann University DETC97/VIB-4075
ASME Biennial 1997 Observations on the Performance of Vibration-Isolated Railway Track Hugh E. M. Hunt, University of Cambridge DETC97/VIB-4084
ASME Biennial 1997 Flexural Vibration of a Viscoelastic Sandwich Beam in its Plane of Lamination Samir A. Nayfeh, Alexander H. Slocum, Massachusetts Institute of Technology DETC97/VIB-4071
ASME Biennial 1997 In-Plane Vibration Modes of Arbitrarily Thick Disks Kevin I. Tzou, Jonathan A. Wickert, Adnan Akay, Carnegie Mellon University DETC97/VIB-4086
ASME Biennial 1997 Transient Response of Distributed Parameter Systems Jianping Zhou, Zhigang Feng, National University of Defense Technology DETC97/VIB-4080
ASME Biennial 1997 The Response of a Nonconservative Distributed System to a Moving Oscillator Alexander V. Pesterev, Russian Academy of Sciences, Lawrence A. Bergman, University of Illinois, Urbana-Champaign DETC97/VIB-4068
ASME Biennial 1997 Vibrations of Ballooning Elastic Strings Fang Zhu, Rajiv Sharma, Christopher D. Rahn, Clemson University DETC97/VIB-4074
ASME Biennial 1997 Spatial Modulation of Repeated Modes in Rotationally Periodic Structures Mintae Kim, Joonho Moon, Jonathan A. Wickert, Carnegie Mellon University DETC97/VIB-4088
ASME Biennial 1997 Large Amplitude Radial Oscillations of Viscoelastic Cylindrical Shells Jang-Horng Yu, University of Houston DETC97/VIB-4079
ASME Biennial 1997 Flexural Vibrations of Thick Cylindrical Panels Hamid R. Hamidzadeh, South Dakota State University DETC97/VIB-4083
ASME Biennial 1997 Nonconservative Stability of a Friction Loaded Disk Jung-Ge Tseng, Chinese Naval Academy, Jon Wickert, Carnegie Mellon University DETC97/VIB-4087
ASME Biennial 1997 Comparison of Bending Models of Multiwire Strand C. V. Jayakumar, S. Sathikh, Crescent Engineering College, C. Jebaraj, Anna University DETC97/VIB-4076
ASME Biennial 1997 Translating Webs with Roller Misalignment Part I: Model and Equilibrium Eric Mockensturm, C. D. Mote, Jr., University of California DETC97/VIB-4089
ASME Biennial 1997 Modeling and Analysis of Spinning Disk-Spindle Vibration Robert G. Parker, Ohio State University DETC97/VIB-4073
ASME Biennial 1997 Static and Dynamic Response of Plates with Curved Boundaries Duk-Hyun Park, Bingen Yang, University of Southern California DETC97/VIB-4078
ASME Biennial 1997 Frequencies of Axial Vibrations of the Beam Livija Cveticanin, Faculty of Technical Sciences DETC97/VIB-4082
ASME Biennial 1997 In-Plane Bending Modal Analysis of Circular Rings and Ring Segments: Use of ~Exact~ Dynamic Stiffness Matrix Saeed Z. Azimi, University of Virginia DETC97/VIB-4067
ASME Biennial 1997 Fly Rod Performance and Line Selection Jon A. Hoffmann, Matthew R. Hooper, California Polytechnic State University DETC97/VIB-4070
ASME Biennial 1997 Free and Forced Vibration of an Axially Moving String with an Arbitrary Velocity Profile W. D. Zhu, B. Z. Guo, The Chinese University of Hong Kong DETC97/VIB-4081
ASME Biennial 1997 An Experimental Method to Determine Poisson's Ratio in a Small Beam Subject to Seismic Excitation Roberto Caracciolo, Universita di Padova, Alessandro Gasparetto, Marco Giovagnoni, Universita di Udine DETC97/VIB-4069
ASME Biennial 1997 Some Interesting Characteristics of a Simple Autonomous Impact System with Symmetric Clearances M rcio Coelho de Mattos, Universidade Federal do EspÌrito Santo, H. I. Weber, Universidade Estadual de Campinas DETC 97/VIB-4098
ASME Biennial 1997 Phase Space Transport in a Class of Multi-Degree-of-Freedom Systems Shyh-Leh Chen, Steven W. Shaw, Michigan State University DETC97/VIB-4105
ASME Biennial 1997 Planar Finite, Forced Dynamics of a Double Hinged Circular Arch: Theory and Experiments, Francesco Benedettini, Universitý dell'Aquila DETC97/VIB-4092
ASME Biennial 1997 Two Groups of Chaotic Vibrations in a Single-Degree-of-Freedom Maglev System Zhixiang Xu, Saga University, Hideyuki Tamura, Kumamoto Institute of Technology DETC97/VIB-4112
ASME Biennial 1997 A Mechanical Filter Concept to Suppress Crane Load Pendulations B. Balachandran, Y.-Y. Li, University of Maryland DETC97/VIB-4091
ASME Biennial 1997 On the Effects of Imperfections and Mistuning on the Performance of Subharmonic Vibration Absorbers Chang-Po Chao, Steven W. Shaw, Michigan State University DETC97/VIB-4104
ASME Biennial 1997 Design and Control of Shipboard Cranes Guo Hui Yuan, Brian R. Hunt,Celso Grebogi, Edward Ott, James A. Yorke, University of Maryland, Eric J. Kostelich, Arizona State DETC97/VIB-4095
ASME Biennial 1997 Stabilization of 1/3-order Subharmonic Resonance Using an Autoparametric Absorber Hiroshi Yabuno, University of Tsukuba, Yasuhiro Endo, Mitsubishi Electric Corp., Nobuharu Aoshima, University of Tsukuba DETC97/VIB-4113
ASME Biennial 1997 Three-to-One Internal Resonances in Parametrically Excited Hinged-Clamped Beams Char-Ming Chin, Ali H. Nayfeh, Virginia Polytechnic Institute and State University DETC97/VIB-4100
ASME Biennial 1997 Nonlinear Vibrations in an Elastic Structure Subjected to Vertical Excitation and Coupled with Liquid Sloshing in a Rectangular Tank Takashi Ikeda, Shimane University DETC97/VIB-4096
ASME Biennial 1997 Post-Critical Dynamics of an Axially Moving Beam Universita di Roma "La Sapienza", Francesco Pellicano, Universita di Modena DETC97/VIB-4110
ASME Biennial 1997 Coupling Between Modes of the Asymmetrically-Forced Stretched String Philip V. Bayly, Washington University, Kevin D. Murphy, University of Connecticut DETC97/VIB-4099
ASME Biennial 1997 Self-Excited Harmonic and Solitary Waves in a Spinning Disk (with Video Presentation) Djamil Boulahbal, University of Waterloo, Stephen H. Crandall, Massachusetts Institute of Technology DETC97/VIB-4093
ASME Biennial 1997 Forced Oscillations of a Continuous Rotor with Geometric Nonlinearities Yukio Ishida, Nagoya University, Imao Nagasaka, Chubu University, Seongwoo Lee, Nagoya University DETC97/VIB-4097
ASME Biennial 1997 Some Aspects of the Analysis of Stick-Slip Vibrations with an Application to Drill Strings Bram L. van de Vrande, Dick H. van Campen, Bram de Kraker, Eindhoven University of Technology DETC97/VIB-4109
ASME Biennial 1997 Near-Resonance Motion of a Rotating System with a Limited Source of Torque Alex Petchenev, Donald E. Bently, Paul Goldman, Bently Rotor Dynamics Research Corporation DETC97/VIB-4102
ASME Biennial 1997 Parametric Identification of Nonlinear Systems using Higher-Order Spectra Khalil A. Khan, B. Balachandran, University of Maryland DETC97/VIB-4090
ASME Biennial 1997 Stability and Bifurcations in a Model of Phase Transitions with Order Parameter Janusz Sikora, Joseph P. Cusumano, William A. Jester, Pennsylvania State University DETC97/VIB-4106
ASME Biennial 1997 Experimental Identification Technique of Nonlinear Beams in Time Domain Kimihiko Yasuda, Keisuke Kamiya, Nagoya University DETC97/VIB-4114
ASME Biennial 1997 Identification of a Two-Degree-of-Freedom Experimental System using a Force Appropriation Approach P. A. Atkins, J. R. Wright, University of Manchester DETC97/VIB-4111
ASME Biennial 1997 Multimodel Resonances in Suspended Cables via a Direct Perturbation Approach Giuseppe Rega, University of Rome "La Sapienza", Walter Lacarbonara, Ali H. Nayfeh, Char-Ming Chin, Virginia Polytechnic Institute and State University DETC97/VIB-4101
ASME Biennial 1997 The Dynamics of the Celt with Second Order Averaging and Computer Algebra A. D. Blackowiak, Intel Corporation, R. H. Rand, Cornell University, H. Kaplan, Syracuse University DETC97/VIB-4103
ASME Biennial 1997 Canonical Perturbation of a Fast Time-Periodic Hamiltonian via Liapunov-Floquet Transformation Eric A. Butcher, S. C. Sinha, Auburn University DETC97/VIB-4107
ASME Biennial 1997 On a Computational Method for Finding the Fixed Points of a Map Ramesh S. Guttalu, University of Southern California DETC97/VIB-4094
ASME Biennial 1997 Commercialization of Active Mounts for Jet Aircraft (Invited) D. E. Ivers, Thomas Lord Research Center DETC97/VIB-4115
ASME Biennial 1997 Harmonic Analysis of Semiactive Suspensions Mehdi Ahmadian, Brian A. Reichert, Xubin Song, Virginia Tech DETC97/VIB-4122
ASME Biennial 1997 Active Isolation Design for a Flexible Base Dino Sciulli, Daniel J. Inman, Virginia Polytechnic Institute and State University DETC97/VIB-4117
ASME Biennial 1997 Effect of Elastomeric Isolator on Dynamic Response of An Exhaust System Sandeep Muju, John Lane, Tenneco Automotive DETC97/VIB-4118
ASME Biennial 1997 Vibration Isolation and Damping for Bucking Bars John G. Cherng, Tong Ge, Sheng-Lih Peng, University of Michigan, Dearborn DETC97/VIB-4119
ASME Biennial 1997 An Efficient Concept of Transmissibility for a General Equipment Isolation System J. J. de EspÌndola, University of Santa Catarina, C. A. Bavastri, National University of Comahue DETC97/VIB-4120
ASME Biennial 1997 Mounting Stiffness Effects in "Free-Free" Modal Tests Joseph A. Wolf, Jr., General Motors Corporation DETC97/VIB-4121
ASME Biennial 1997 Semiactive Control of Multiple Degree of Freedom Systems Mehdi Ahmadian, Virginia Polytechnic Institute and State University DETC97/VIB-4123
ASME Biennial 1997 Magnetorheological Fluid Dampers for Seismic Control J. David Carlson Thomas, Lord Research Center DETC97/VIB-4124
ASME Biennial 1999 Time Lag in Handling Responses of Automobiles Induced by Steering/Suspension Compliance or Hysteresis Park, J.; Pan, Z. p. 1-12 CN035486010
ASME Biennial 1999 A Compliant Double Pin Track Link Model for Multibody Tracked Vehicles Cho, J. H.; Bae, D. S.; Ryu, H. S. p. 13-20 CN035486021
ASME Biennial 1999 Modeling o f Track-Wheel-Terrain Interaction for Dynamic Simulation of Tracked Vehicle Systems Ma, Z.-D.; Perkins, N. C. p. 21-32 CN035486033
ASME Biennial 1999 Low Order Vibration Models for Tracked Vehicles Scholar, C.; Perkins, N. C.; Ma, Z.-D. p. 33-46 CN035486045
ASME Biennial 1999 The Application of Non-Linear Boundary Conditions to a Linearly Elastic Model to Achieve Multi-State Structural Behavior in a Large-Displacement Mechanical System Simulation McConville, J. B. p. 47-60 CN035486057
ASME Biennial 1999 Study on Elastic Forces of the Absolute Nodal Coordinate Formulation for Deformable Beams Takahashi, Y.; Shimizu, N. p. 61-70 CN035486069
ASME Biennial 1999 A Numerical Approach for Solving Flexible Multibody Systems Using the Absolute Nodal Coordinate Formulation Yakoub, R. Y.; Shabana, A. A. p. 71-78 CN035486070
ASME Biennial 1999 Elastic Forces and Coordinate Systems in the Finite Element Formulations Berzeri, M.; Campanelli, M.; Shabana, A. A. p. 79-86 CN035486082
ASME Biennial 1999 Quasi Exact Solutions for Some Elastodynamics Problems Barraco, A.; Gilbert, M. p. 87-90 CN035486094
ASME Biennial 1999 A Virtual Body and Joint for Constrained Flexible Multibody Dynamics Bae, D. S.; Han, J. M.; Choi, J. H. p. 91-98 CN035486100
ASME Biennial 1999 A Virtual Body and Joint for Constrained Flexible Multibody Dynamics: A Generalized Recursive Formulation Bae, D. S.; Han, J. M.; Choi, J. H. p. 99-106 CN035486112
ASME Biennial 1999 Dynamical Simulation of Flexible Multibody System by Using a Rigid Body Model Pascal, M.; Gagarina, T. p. 107-110 CN035486124
ASME Biennial 1999 Identification of Free-Free Modes From Constrained Vibration Data for Flexible Multibody Models Yi, T. Y.; Nikravesh, P. E. p. 111-120 CN035486136
ASME Biennial 1999 Vibration of Moving Flexible Bodies (Formulation of Dynamics by Using Normal Modes and a Local Observer Frame) Kawamoto, A.; Inagaki, M.; Aoyama, T.; Mori, N.; Yasuda, K. p. 121-130 CN035486148
ASME Biennial 1999 A Study on the Dynamic Analysis of Flexible and Rigid Link System Sugano, N.; Honke, K.; Imanishi, E.; Hashimoto, K. p. 131-138 CN035486150
ASME Biennial 1999 Nonlinear Dynamics of Rigid and Flexible Multibody Systems Zakhariev, E. V. p. 139-150 CN035486161
ASME Biennial 1999 Incremental Finite Element Formulations and Flexible Multibody Dynamics Berzeri, M.; Campanelli, M.; Shabana, A. A. p. 151-158 CN035486173
ASME Biennial 1999 A Large Displacement Formulation Using Euler's Angles Biakeu, G.; Thouverez, F.; Laine, J. P.; Jezequel, L. p. 159-168 CN035486185
ASME Biennial 1999 Free and Forced Vibration of a Kinked Cantilever Beam Reddy, B. S.; Simha, K. R. Y.; Ghosal, A. p. 169-178 CN035486197
ASME Biennial 1999 Influence of Warping Effects on the Dynamic Behavior of Composite Beams Under Bending and Torsion Combined Loads Tanghe-Carrier, F.; Gay, D. p. 179-188 CN035486203
ASME Biennial 1999 A Hybrid Highly Parallelizable Algorithm for the Dynamics of Rigid Body Chain Systems Duan, S.; Anderson, K. S. p. 189-200 CN035486215
ASME Biennial 1999 A New Order-N Order-N3 Hybrid Parallelizable Algorithm for a Multi-Rigid-Body Mechanical System Anderson, K. S.; Duan, S. p. 201-212 CN035486227
ASME Biennial 1999 A Vector Oriented Implementation Method for Efficient Dynamic Simulation of Multibody Vehicle Models Bae, D. S.; Kim, H. W.; Yae, H. p. 213-220 CN035486239
ASME Biennial 1999 Efficient Human Motion Planning Using Recursive Dynamics and Optimal Control Techniques Lo, J.; Metaxas, D. p. 221-234 CN035486240
ASME Biennial 1999 ODE Methods for Solving the Multibody Dynamics With Constraints Koganezawa, K.; Kaneko, K. p. 235-242 CN035486252
ASME Biennial 1999 An Analytical Scheme for Stochastic Dynamic Systems Containing Fractional Derivatives Agrawal, O. P. p. 243-250 CN035486264
ASME Biennial 1999 A Numerical Algorithm for Solving Stiff ODEs and DAEs in Multibody Mechanics Pasic, H. p. 251-262 CN035486276
ASME Biennial 1999 State-Space Based Implicit Integration of the Differential-Algebraic Equations of Multibody Dynamics Negrut, D.; Haug, E. J. p. 263-272 CN035486288
ASME Biennial 1999 Analytical Reformulation of the Multibody Dynamics of a Satellite Sanchez, N. p. 273-280 CN035486290
ASME Biennial 1999 Multirate Integration for Multibody Dynamic Analysis With Decomposed Subsystems Kim, S.-S.; Freeman, J. S. p. 281-290 CN035486306
ASME Biennial 1999 Multirate Integration for Real-Time Simulation of Wheel Loader Hydraulics Buzdugan, L. I.; Balling, O.; Lee, P. C.-T.; Balling, C.; Freeman, J. S.; Huck, F. p. 291-302 CN035486318
ASME Biennial 1999 Parallel Implementation of a New Algorithm for Dynamics of Multibody Systems Duan, S.; Anderson, K. S. p. 303-314 CN035486320
ASME Biennial 1999 Efficient Dynamic Analysis Method for Multibody Systems With Constraint Violation Stabilization Method Reungwetwattana, A.; Toyama, S. p. 315-324 CN035486331
ASME Biennial 1999 Vibration Analysis for Gun Systems by Multibody Dynamics Wang, D.; Xiao, R.; Ouyang, G. p. 325-330 CN035486343
ASME Biennial 1999 Command Preprocessor for Radiotelescope and Microwave Antennas Gawronski, W. p. 331-342 CN035486355
ASME Biennial 1999 Equations of Motion of Spool Valves With Eccentric Clearance Duan, S.; Anderson, K. S. p. 343-350 CN035486367
ASME Biennial 1999 Dynamics of Washing Machines: Mechanical Model and Simulation Wagner, F.; Pfeiffer, F. p. 351-360 CN035486379
ASME Biennial 1999 A New Design Methodoloty for Planar Vibration Absorbers Blanchet, P.; Lipkin, H. p. 361-370 CN035486380
ASME Biennial 1999 Recursive Formalism With a Minimal Dynamic Parameterization for the Identification and Simulation of Multibody Systems Chenut, X.; Fisette, P.; Samin, J.-C. p. 371-380 CN035486392
ASME Biennial 1999 Sliding Bearing Nonlinear Vibration Prediction Jauregui, J. C.; Gonzalez, O. M. p. 381-386 CN035486409
ASME Biennial 1999 Modular Modelling and Simulation of Multibody Systems Kubler, R.; Schiehlen, W. p. 387-398 CN035486410
ASME Biennial 1999 A Poisson-Based Formulation for Frictional Impact Analysis of Open and Closed-Loop Multibody Mechanical Systems Lankarani, H. M.; Ayyagari, M. p. 399-410 CN035486422
ASME Biennial 1999 Defining the Coefficient of Restitution for the Impact Between Free and Constrained Bodies Escalona, J. L.; Mayo, J. M.; Dominguez, J. p. 411-418 CN035486434
ASME Biennial 1999 Pieced-Interval Modal Response of Elastic Systems With High-Frequency Excitations Khulief, Y. A. p. 419-426 CN035486446
ASME Biennial 1999 Motion Design by Interference Analysis of Multibody Systems Wang, D.; Beale, D. p. 427-436 CN035486458
ASME Biennial 1999 Dynamics of Reconfigurable Multibody Systems Takahashi, T.; Matunaga, S.; Ohkami, Y. p. 437-446 CN035486460
ASME Biennial 1999 Seismic Responses of Large Flexible Structure Including Contact Problem Kuribara, H.; Kobayashi, N. p. 447-454 CN035486471
ASME Biennial 1999 Treatment of Lubrication in Long Bearings for Joint Clearances in Multibody Mechanical Systems Ravn, P.; Shivaswamy, S.; Lankarani, H. M. p. 455-460 CN035486483
ASME Biennial 1999 Development of the Mobile Manipulator Analyzer Pitts, D. T.; Emami, M. R.; Goldenberg, A. A. p. 461-468 CN035486495
ASME Biennial 1999 Frequency Domain Structural Optimization of a Flexible Manipulator Incorporating a PD Controller in the Design Stage Chang, Y. H.; Seireg, A. p. 469-486 CN035486501
ASME Biennial 1999 Analysis of Hyper-Redundant Manipulators Asl, F. M.; Ashrafiuon, H.; Nataraj, C. p. 487-496 CN035486513
ASME Biennial 1999 Flatness-Based Control of Unconstrained Cable Suspension Manipulators Maier, T.; Woernie, C. p. 497-506 CN035486525
ASME Biennial 1999 On some Intrinsic Features of the Dynamics of Mechanisms Lerbet, J. p. 507-518 CN035486537
ASME Biennial 1999 Optimal Motions for Underactuated Manipulators Sohl, G. A.; Bobrow, J. E. p. 519-528 CN035486549
ASME Biennial 1999 Minimum Jerk Traction Control of a Wheeled Mobile Robot Moving Over a Hump Ayalew, A.; Lai, E.; Oyadiji, S. O. p. 529-538 CN035486550
ASME Biennial 1999 A Dynamic Performance Evaluation Model for Target Capture by Robot Mechanisms, With the Consideration of Structural Flexibility Kovecses, J.; Cleghorn, W. L.; Fenton, R. G. p. 539-550 CN035486562
ASME Biennial 1999 A Multibody Loop Constraints Approach for Modelling CAM/Follower Devices: Application in Mobile Robotics Fisette, P.; Lipinski, K.; Samin, J.-C. p. 551-562 CN035486574
ASME Biennial 1999 Modeling Extruded Profiles for Railway Coaches Using SEA Geissler, P.; Neumann, D. p. 563-570 CN035486586
ASME Biennial 1999 AutoSEA2: A New Design Evaluation Tool for Noise and Vibration Engineering Bremner, P. G.; Burton, T. E.; Cunninham, A. p. 571-578 CN035486598
ASME Biennial 1999 The Use of Experimental SEA for Modeling Road Noise in Cars Hermans, L.; De Langhe, K.; Iadevaia, M. p. 579-590 CN035486604
ASME Biennial 1999 A Design Optimization Process Based on an Energy Finite Element Formulation Borlase, G.; Vlahopoulos, N.; Garza-Rios, L. O. p. 591-600 CN035486616
ASME Biennial 1999 Use of Measured Mobility to Improve SEA Predictions in the Mid-Frequency Range Manning, J. E. p. 601-608 CN035486628
ASME Biennial 1999 Solution of the Moving Mass Problem Using Complex Eigenfunction Expansions Lee, K.-Y.; Renshaw, A. A. p. 609-616 CN035486630
ASME Biennial 1999 Modal Analysis of Ballooning Strings With Small Sag Fan, R.; Singh, S. K.; Rahn, C. D. p. 617-624 CN035486641
ASME Biennial 1999 Modal Characteristic of Cantilevered Beams and Plates: A Study of Transition From Beam-Like to Plate-Like Behaviour Tangchaichit, K.; Oyadiji, S. O. p. 625-634 CN035486653
ASME Biennial 1999 Modal Overlap and Dissipation Effects in a Fuzzy Structure Containing a Continuous Master Element Drexel, M. V.; Ginsberg, J. H. p. 635-644 CN035486665
ASME Biennial 1999 Thickness Profiles for Rotating Circular Disks That Maximize Critical Speed Renshaw, A. A.; Warner, G. M. p. 645-656 CN035486677
ASME Biennial 1999 Intermodal Coupling in Flexible Spinning Disk-Spindle Systems Deshpande, M.; Mote, C. D. p. 657-664 CN035486689
ASME Biennial 1999 Forced Vibration and Dynamic Stability of a Rotating Tapered Composite Timoshenko Shaft Kim, W.; Argento, A.; Scott, R. A. p. 665-672 CN035486690
ASME Biennial 1999 Linear In-Plane Free Vibration of a Rotating Disk Hamidzadeh, H. R.; Dehghani, M. p. 673-682 CN035486707
ASME Biennial 1999 Free Vibration of Coupled Disk-Hat Structures Bae, J.-C.; Wickert, J. p. 683-692 CN035486719
ASME Biennial 1999 Stability of Out-of-Plane Vibration of a Uniform Beam Carrying an End Body and Attached Radially to a Rotating Hub Naguleswaran, S. p. 693-700 CN035486720
ASME Biennial 1999 Proper Orthogonal Decomposition of an Experimental Cantilever Beam Riaz, M. S.; Feeny, B. F. p. 701-708 CN035486732
ASME Biennial 1999 Dynamic Response of Adhesively Bonded Beams Subjected to Harmonic Peeling Loads Hamidzadeh, H. R.; Prescher, J. L.; Nayeb-Hashemi, H. p. 709-714 CN035486744
ASME Biennial 1999 Analysis of the Natural Vibration Properties of a Timoshenko Beam Supported by Springs (By Finite Integral Transform Method) Xu, Z.; Tamura, H.; Seto, K. p. 715-720 CN035486756
ASME Biennial 1999 A Free-Free Beam Rotationally Restrained at One End Hirsch, R. A. p. 721-726 CN035486768
ASME Biennial 1999 Fundamental Frequencies of Cantilever Beams Hofffmann, J. A.; Wertheimer, T. p. 727-732 CN035486770
ASME Biennial 1999 Modal Analysis for the Active Multi-Layer Beams by Using Spectrally Formulated Exact Eigenfunctions Lee, U.; Kim, J. p. 733-742 CN035486781
ASME Biennial 1999 Effect of Localized Heat Damage on the Natural Frequency of Glass-Fiber Reinforced Plastics Nayeb-Hashemi, H.; Harrison, A.; Kisnomo, P.; Saniei, N. p. 743-748 CN035486793
ASME Biennial 1999 An Explicit Scheme for Structural Dynamics Analysis Tchamwa, B.; Conway, T.; Wielgosz, C. p. 749-756 CN035486800
ASME Biennial 1999 Nonlinear Vibration of Parametrically Excited Viscoelastic Moving Belts Zhang, L.; Zu, J. W. p. 757-762 CN035486811
ASME Biennial 1999 An Analytical Solution for the Nonlinear Vibration of Rotating, Thin Disks Luo, A. C. J.; Mote, C. D. p. 763-770 CN035486823
ASME Biennial 1999 Nonlinear Dynamics of a Taut Spatial String With Material Nonlinearities Leamy, M. J.; Gottlieb, O. p. 771-782 CN035486835
ASME Biennial 1999 Transfer of Energy From High- to Low-Frequency Modes in the Bending-Torsion Oscillation of Cantilever Beams Arafat, H. N.; Nayfeh, A. H. p. 783-794 CN035486847
ASME Biennial 1999 The Influence of Transverse Clamping Flexibility on Centrally Clamped, Centripetally Tensioned, Rotating Circular Disks Kim, H.-R.; Renshaw, A. A. p. 795-802 CN035486859
ASME Biennial 1999 Optimization of Plate and Shell Surfaces Awrejcewicz, J. A.; Krysko, V. A. p. 803-812 CN035486860
ASME Biennial 1999 Free Vibration of Uniform, Flexible, Cylindrical Shell Rotors Wang, F.-Y.; Luo, A. C. J. p. 813-818 CN035486872
ASME Biennial 1999 Frequency Clusters in the Spectrum of Annular Cylinders Tzou, K. L.; Wickert, J. A.; Akay, A. p. 819-828 CN035486884
ASME Biennial 1999 Free Response of Twisted Plates Mockensturm, E. M.; Mote, C. D. p. 829-836 CN035486896
ASME Biennial 1999 The Sliding of an Elastic Half-Space Against a Rigid Surface With Friction Reduction Due to Incident Dilatational Waves Adams, G. C. p. 837-844 CN035486902
ASME Biennial 1999 Combinations for the Free Vibration Behaviors of Anisotropic Rectangular Plates Under General Edge Conditions Narita, Y. p. 845-852 CN035486914
ASME Biennial 1999 A Closed-Form Approach to Transient Dynamic Response of One-Dimensional Distributed Systems Wu, X.; Yang, B. p. 853-860 CN035486926
ASME Biennial 1999 Simplified Dispersion Relations for Floquet Waves in a Plate With Multiple Arrays of Attachments Gueorguiev, D.; McDaniel, J. G.; DuPont, P. p. 861-870 CN035486938
ASME Biennial 1999 Separating the Contributions in Localization Methods: A Technique to Enhance Identification Damping Related Parameters Algrain, H.; Conti, C.; Dehombreux, P. p. 871-880 CN035486940
ASME Biennial 1999 Vibration Testing by Phase Shifted Electronic Holography for Damage Detection in a Car Door Borza, D. N. p. 881-888 CN035486951
ASME Biennial 1999 Parameter Identification of Beam Using Image Processing: 3rd Report, Experimental Verification Kawai, T.; Ito, M. p. 889-896 CN035486963
ASME Biennial 1999 Damage Detection in Rods Using Wave Propagation and Regression Analysis Feroz, K. T.; Oyadiji, S. O. p. 897-904 CN035486975
ASME Biennial 1999 Damage Detection of Flexible Beams Using Transfer Function Correlation Lew, J.-S.; Hyde, C.; Wade, M. p. 905-912 CN035486987
ASME Biennial 1999 Structural Damage Detection Using Modal Norms Gawronski, W.; Sawicki, J. T. p. 913-918 CN035486999
ASME Biennial 1999 Variation in the Geometric Interpretation of the Eigenvalue Problem of a Structure Due to Damage Agosto, F. A. J.; Hendricks, S. L. p. 919-928 CN035487001
ASME Biennial 1999 On the Vibration of Rotor With Rotor/Stopper Rubbing Dai, X.; Zhang, X.; Jin, Z. p. 929-934 CN035487013
ASME Biennial 1999 Compressibility Effects on the Static and Dynamic Characteristics in Stepped Thrust Gas Film Bearings Hashimoto, H.; Ochiai, M. p. 935-944 CN035487025
ASME Biennial 1999 Case History of a Failure of a Gas Turbine With a Floating Sleeve Bearing Petchenev, A.; Bently, D. E.; Muszynska, A.; Goldman, P.; Grissom, R. L. p. 945-952 CN035487037
ASME Biennial 1999 Damped Vibration Absorbers Applied to Lateral Modes of Rotating Machinery Greenhill, L. M.; Raven, L. F. p. 953-962 CN035487049
ASME Biennial 1999 Influence Coefficients Obtained by Hammer Beat Permit Significant Time Savings When Balancing Simple Flexible Rotors Wiese, D.; Breitwieser, M. p. 963-968 CN035487050
ASME Biennial 1999 Reduction of the 2F-Vibrations of Simple Flexible Rolls by Partial Machining Wiese, D.; Breitwieser, M. p. 969-976 CN035487062
ASME Biennial 1999 A Flexible Rotor on Flexible Bearing Suports: Part I - Stability Vazquez, J. A.; Barrett, L. E.; Flack, R. D. p. 977-984 CN035487074
ASME Biennial 1999 A Flexible Rotor on Flexible Bearing Supports: Part II - Unbalance Response Vazquez, J. A.; Barrett, L. E.; Flack, R. D. p. 985-990 CN035487086
ASME Biennial 1999 Laser Vibrometry: The Complete 6 Degree-of-Freedom Model of Target Velocity Sensitivity Bell, J. R.; Rothberg, S. J. p. 991-1002 CN035487098
ASME Biennial 1999 A New Approach to Prediction of the Self-Excited Torsional Vibration of Rolling Mill Drives in Rolling Slippage Wang, Z.-H.; Zhang, W. J.; Wang, D.-J. p. 1003-1010 CN035487104
ASME Biennial 1999 Optimum Balancing of Three-Dimensional "RSSR" Mechanisms Coelho, T. A. H.; Alves, V. F. A. p. 1011-1016 CN035487116
ASME Biennial 1999 Measured Torsional Vibration Characteristics of a 100 Megawatt Wind Tunnel Drive Line Corliss, J. M.; Sprysl, H. p. 1017-1026 CN035487128
ASME Biennial 1999 A Model-Based Method for Balancing of Flexible Rotors Mounted on Oil-Film Bearings Without Trial Weight Fritzen, C.-P.; Gans, P.; Wiese, D.; Breitwieser, M. p. 1027-1036 CN035487130
ASME Biennial 1999 Clearance and Dry Friction Study in a Nonlinear Torsional Vibration of a Rotating Machinery Mizutani, K.; Zahid, H. M. p. 1037-1048 CN035487141
ASME Biennial 1999 Application of Transfer Matrices to Non-Linear Rotor Bearing Systems Liew, A.; Feng, N. S.; Hahn, E. J. p. 1049-1058 CN035487153
ASME Biennial 1999 On the Natural Frequency Calculation of Rotating Cantilever Uniform Beams With Coriolis Effects: Dynamic Finite Element (DFE) Hashemi, S. M.; Richard, M. J. p. 1059-1070 CN035487165
ASME Biennial 1999 Use of the Campbell Diagram in Rotordynamics Lalanne, M.; Ferraris, G. p. 1071-1078 CN035487177
ASME Biennial 1999 Nonlinear Response of Rotors Supported on Squeeze Film Dampers Ramesh, K.; Kirk, R. G. p. 1079-1086 CN035487189
ASME Biennial 1999 Vibration Analysis of Rotor-Bearing Systems With Internal Damping and Torsional Effects Mohiuddin, M. A.; Khulief, Y. A.; Al-Juruf, R. S. p. 1087-1096 CN035487190
ASME Biennial 1999 A Nonlinear Magnetic Circuit Analysis of a Permanent Magnet Biased Homopolar Bearing Kenny, A.; Palazzolo, A. p. 1097-1104 CN035487207
ASME Biennial 1999 Optimized Realization of Fault-Tolerance Heteropolar Magnetic Bearings for Active Vibration Control Na, U. J.; Palazzolo, A. p. 1105-1116 CN035487219
ASME Biennial 1999 Design and Testing of a Permanent Magnet Biased Active Magnetic Bearing Overstreet, R. W.; Flowers, G. T.; Szasz, G. p. 1117-1124 CN035487220
ASME Biennial 1999 Optimum Design of Magnetic Head Slider Under Static and Dynamic Operation Conditions of Hard Disk Drive Hattori, Y.; Hashimoto, H.; Ochiai, M. p. 1125-1134 CN035487232
ASME Biennial 1999 High Cycle Fatigue Cracks at Radial Fan Impellers Caused by Aeroelastic Self-Excited Impeller Vibrations: Part I - Case History, Root Cause Analysis, Vibration Measurements Eckert, L. p. 1135-1146 CN035487244
ASME Biennial 1999 High Cycle Fatigue Cracks at Radial Fan Impellers Caused by Aeroelastic Self-Excited Impeller Vibrations: Part II - Mechanism and Mathematical Model Ni, A. p. 1147-1160 CN035487256
ASME Biennial 1999 A Genetic Algorithm Based Balancing Framework for Flexible Rotors Qiu, H.; Qu, L.; Sun, R. p. 1161-1168 CN035487268
ASME Biennial 1999 On Further Improvements in Predicting Rotor Vibration Subbiah, R. p. 1169-1178 CN035487270
ASME Biennial 1999 Mode Identification for Rotating Rigid Shaft With Flexible Disks by Mode Splits Lee, C.-W.; Ham, J.-S. p. 1179-1190 CN035487281
ASME Biennial 1999 Indentification of Rotating Asymmetry in Rotating Machines by Using Reverse DFRF Lee, C.-W.; Kwon, K.-S. p. 1191-1200 CN035487293
ASME Biennial 1999 The Integration of Structural and Fluid Film Dynamic Elements in Foil Bearings: Part II - A New Approach to the Problem Swanson, E. E.; Heshmat, H. p. 1201-1208 CN035487300
ASME Biennial 1999 The Integration of Structural and Fluid Film Dynamic Elements in Foil Bearings: Part I - Past Approaches to the Problem Heshmat, H. p. 1209-1220 CN035487311
ASME Biennial 1999 Vibrational Characteristics of Composite Shafts Sekhar, A. S.; Kumar, N. R. p. 1221-1228 CN035487323
ASME Biennial 1999 Vibration Characteristics of a Rotor-Flexible Disk System: In Case of HDD Spindle-Motor System Han, D. C.; Choi, S. H.; Park, K. B.; Jung, S. C. p. 1229-1234 CN035487335
ASME Biennial 1999 Maximum Response of a Slow-Variant Mechanical System During Transition Through a Resonance Balashov, D.; Irretier, H. p. 1235-1240 CN035487347
ASME Biennial 2001 Design and Utilization of an Impact Pendulum for Assessing Energy Losses Due to the Impact of a Projectile with an Arbitrary Medium Mohammad Khosrowjerdi, Western New England College; James Aflaki, Christian Brothers University DETC2001/CIE-21276
ASME Biennial 2001 MATLAB In Engineering Education M. H.Alimi, M.Mahinfalah, G. H.Nazari, North Dakota State University DETC2001/CIE-21277
ASME Biennial 2001 Mathematical Modeling of a DC Motor with Encoder Feedback Using Real Time Simulation Kourosh Rahnamai, Brian Yanke, Western New England College DETC2001/CIE-21278
ASME Biennial 2001 Windows-Based Laboratory System For Teaching Extended Surface Heat Transfer Characteristics Mohammad Khosrowjerdi, Said Dini, Western New England College; James Aflaki, Christian Brothers University DETC2001/CIE-21279
ASME Biennial 2001 Optimization for Minimum Weight of Ultralight Structures under Axial Crush Loading W. Chen, Massachusetts Institute of Technology DETC2001/DAC-21040
ASME Biennial 2001 Design for Energy Absorption: A Topology Optimization Approach H.C. Gea, J. Luo, Rutgers, The State University of New Jersey DETC2001/DAC-21060
ASME Biennial 2001 Metmodeling Development for Vehicle Frontal Impact Simulation R-J, Yang, Ford Research Laboratory DETC2001/DAC-21012
ASME Biennial 2001 Optimization for Vibration Reduction in Final Phase of Automotive Body Structural Design Y. Tsurumi, N. Mori, T. Nakagawa, Toyota Central R&D Labs, and H. Yamakawa, Waseda University DETC2001/DAC-21134
ASME Biennial 2001 Product Line Design Selection Under Uncertainty and With Competitive Advantage H. Li, S. Azarm, University of Maryland DETC2001/DAC-21022
ASME Biennial 2001 Incorporating Lifecycle Costs into Product Architecture Decisions J.B. Dahmus, K. Otto, Massachusetts Institute of Technology DETC2001/DAC-21110
ASME Biennial 2001 Improving Commonality in Custom Products Using Product Platforms R.R. Farrell, T. Simpson, Penn State University DETC2001/DAC-21125
ASME Biennial 2001 Product Variety Optimization: Simultaneous Optimization of Module Combination and Module Attributes K. Fujita, H. Yoshidaa, Osaka University DETC2001/DAC-21058
ASME Biennial 2001 Minimum Torque Placement of a Kinematic Structure W. Yu, J. Yang, K. Abdel-Malek, The University of Iowa DETC2001/DAC-21014
ASME Biennial 2001 The Design of Parallel Manipulators of Star Topology Under Isotropic Constraint L. Baron, G. Bernier, Ecole Polytechnique de Montreal DETC2001/DAC-21025
ASME Biennial 2001 Development of Parallel Architecture Spatial Compliant Manipulators S. Canfield, J.W. Beard, Tennessee Technological University, and N. Lobontiu, M. Paine, J. Paine, Dynamic Structures and Material, LLC. DETC2001/DAC-21033
ASME Biennial 2001 A Matrix Formulation for the Dynamic Analysis of Planar Mechanisms using Point Coordinates and Velocity Transformation H. Attia, King Saud University DETC2001/DAC-21020
ASME Biennial 2001 Design Parameterization For Concurrent Design And Manufacturing Of Mechanical Systems Kuang-Hua Chang, University of Oklahoma DETC2001/DFM-21161
ASME Biennial 2001 Concurrent Product Development Across the Supply Chain: Development of Integrator/Supplier Risk and Coupling Indices Kosuke Ishii, Stanford University; Marcos Esterman, Hewlett-Packard DETC2001/DFM-21192
ASME Biennial 2001 An Interactive Aid For Designing And Planning Heterogeneous Layered Prototypes Jonathan Clark, Liba Xia, Stanford University DETC2001/DFM-21199
ASME Biennial 2001 Visualization of Manuf. Proc. On Internet Dusan N. Sormaz, Prashant A. Borse, Ohio University DETC2001/DFM-21201
ASME Biennial 2001 Spatial Reasoning about Mechanical Behaviors Levent Kara, Thomas Stahovich, Carnegie Mellon University DETC2001/DTM-21684
ASME Biennial 2001 Learning From Design Experience: TODO/TABOO Guidance Matthew Campbell, Jonathan Cagan, and Kenneth Kotovsky, Carnegie Mellon University DETC2001/DTM-21687
ASME Biennial 2001 On Defining Product Requirements: A Case Study in the UK Health Sector Vassilis Agouridas, Jim Baxter, Alison McKay, and Alan de Pennington, University of Leeds DETC2001/DTM-21692
ASME Biennial 2001 Towards a Model-Based Framework for Linking Design Requirements to the Functional Layout of the Product Patrik Nilsson, Bjorn Fagerstrom, Chalmers University of Technology DETC2001/DTM-21696
ASME Biennial 2001 Richard Schwertassek's Contributions to Multibody Dynamics (Presentation Only) Ahmed Shabana, University of Illinois at Chicago DETC2001/VIB-21308
ASME Biennial 2001 Dynamic Track Tension of High Mobility Tracked Vehicles J.H. Choi, Kyunghee University; D.C. Park, Agency for Defense Development; H.S. Ryu, D.S. Bae, and G.S. Huh, Hanyang University, South Korea. DETC2001/VIB-21309
ASME Biennial 2001 Modeling of Track-Wheel-Terrain Interaction for Dynamic Simulation of Tracked Vehicles: Numerical Implementation and Further Results Zheng-Dong Ma, and N.C. Perkins, University of Michigan DETC2001/VIB-21310
ASME Biennial 2001 A Real-Time Multibody Vehicle Dynamics Model Using a Subsystem Synthesis Method Sung-Soo Kim, Chungnam National University; Young-Seok Oh, Korea Automotive Motor Corporation, South Korea DETC2001/VIB-21311
ASME Biennial 2001 Optimizing Parameters of a Two-Degree-of-Freedom MAGLEV System Zhixiang Xu, and Kunisato Seto, Saga University; and Hideyuki Tamura, Sojo University, Japan. DETC2001/VIB-21312
ASME Biennial 2001 Computation of Time-Varying Cross-Spectra by Harmonic Wavelets David E. Newland, Cambridge University, United Kingdom DETC2001/VIB-21001
ASME Biennial 2001 Wavelet Transform of Sound Signal in Fluid-Filled Viscoelastic Pipes Matjaz Prek, University of Ljubljana, Slovenia DETC2001/VIB-21002
ASME Biennial 2001 Comparative Study Between CWT and STFT for On-Line Health Monitoring Applications in Systems Under Random Excitation Raul J. Alonso, Mohammad Noori, North Carolina State University; Arata Masuda, Kyoto Institute of Technology; Japan; and Zhikun Hou, Worcester Polytechnic Institute DETC2001/VIB-21003
ASME Biennial 2001 Application of Harmonic Wavelet Analysis to Soil Motion Data Berral Teymur and S. P. Madabhushi, Cambridge University, United Kingdom DETC2001/VIB-21004
ASME Biennial 2001 Modeling Damping Effect Due to High Transient Motion Using the Riemannian Space A. Al Majid and R. Dufour, INSA de Lyon, France DETC2001/VIB-21414
ASME Biennial 2001 Periodic Solutions of an Inhomogeneous Second Order E quation with Time- Dependent Damping Coefficient Hartono, A. H. P. van der Burgh, Delft Univ. of Technology, Netherlands DETC2001/VIB-21415
ASME Biennial 2001 Analysis of a Class of Coupled Nonlinear Oscillators with an Application to Flow Induced Vibrations Timber I. Haaker, Delft Univ. of Technology, Netherlands DETC2001/VIB-21416
ASME Biennial 2001 Generalized Harmonic Oscillator: Velocity Dependent Frequencies Ronald E. Mickens, Clark Atlanta University DETC2001/VIB-21417
ASME Biennial 2001 Piezoceramic Springs for Structural Semi-Active Multi-Modal Vibration Control L. R. Corr and W. W. Clark, University of Pittsburgh DETC2001/VIB-21460
ASME Biennial 2001 Experimental Investigation of Control Logic for State-Switched Dampers G. D. Larson and K. A. Cunefare, Georgia Tech DETC2001/VIB-21461
ASME Biennial 2001 Differential Isolation of Science Instrumentation Package G. J. Knowles and B. L. Bower, QorTek, Inc. DETC2001/VIB-21462
ASME Biennial 2001 Constrained-Layer Damping of Torsional Vibration of Thin-Walled Tubes S. A. Nayfeh, Massachusetts Institute of Technology DETC2001/VIB-21463
ASME Biennial 2001 Modeling of Hybrid Piezoelectric/Magnetostrictive Transducers (Presentation Only) M. J. Dapino, Iowa State University and R. C. Smith, North Carolina State University DETC2001/VIB-21464
ASME Biennial 2001 The Effect of Hertzian Bending and Shearing Stiffness on Noise and Vibration J. Abdo, The Hashemite University, Jordan DETC2001/VIB-21499
ASME Biennial 2001 Model-Based Estimation of Impact Forces Affecting Elastic Structures: Simulation and Experiment C. Ablcht and J. Bormann, University of Essen; P. Muller and D. Soffker, University of Wuppertal; and H. Ulbrich, University of Essen, Germany DETC2001/VIB-21500
ASME Biennial 2001 Simulating and Detecting a Vibration-Induced Failure in an Air-Handling Assembly G. McGee and D. Adams, Purdue University DETC2001/VIB-21501
ASME Biennial 2001 Investigation of the Dynamic Behavior of Railway Ballast using Molecular Dynamics Simulations H. Kruse and K. Popp, University of Hannover, Germany DETC2001/VIB-21502
ASME Biennial 2001 A Simple Dynamic Modeling of Head Slap in Hard Disk Drive Seong-Hun Lee, Jeong-Hak Lee, and Kwang-Joon Kim, Center for Noise and Vibration Control, KAIST, South Korea DETC2001/VIB-21503
ASME Biennial 2001 On the Response of a Shaken Cable-Suspended Mass. L. N. Virgin, J. M. Nichols, W. N. Simmons, and R. H. Plaut Duke University, Durham, NC DETC2001/VIB-21552
ASME Biennial 2001 Exploiting Results of Experimental Nonlinear Dynamics for Reduced-Order Modeling of Suspended Cable R. Alaggio and G. Rega Universita di Roma La sapienza, Italy DETC2001/VIB-21554
ASME Biennial 2001 An Experimental study of the Nonlinear Dynamics of a Portal Frame Foundation for a Non Ideal Motor Reyolando M.L.R.F. Brasil, José M. Balthazar, and Flávio J. Garzeri Universiade de Sao Paulo, Brazil DETC2001/VIB-21548
ASME Biennial 2001 Nonlinear Behavior of an Inclined Cable: Experimental and Analytical Investigations A. Berlioz, C -H. Lamarque, and J.M. Malasoma, Ecole Nationale des Travaux Public de l'Etat, Vaulx -en-Velin, France DETC2001/VIB-21557
ASME Biennial 2001 The Use of Experimental Tests in the Formulation of Analytical Models for the Finite Forced Dynamics of Planar Arches Rocco Alaggio and Francesco Benedettini, Universita' dell'Aquila, L'Aquila, Italy DETC2001/VIB-21613
ASME Biennial 2001 The Attitude Stability for Longitudinal Motion of Underwater Vehicle Deshi Wang, Ming Yang, Naval Engineering University; and Renbin Xiao, Huazhong University of Science and Technology, China DETC2001/VIB-21607
ASME Biennial 2001 Signatures of Acoustic Emission Signals Generated During High Speed Cutting Andre Sitz, Udo Schwarz, and J. Kurths, University of Potsdam; and Doris Maus, Michael Wiese, and G. Warnecke, University of Kaiserslautern, Germany DETC2001/VIB-21618
ASME Biennial 2001 The Role of Nonlinear Strain-Displacement Relation on the Geometric Stiffening of Rotating Flexible Beams Marcelo A. Trindade and Rubens Sampaio, Pontifícia Universidade Católica do Rio de Janeiro, Brazil DETC2001/VIB-21614
ASME Biennial 2001 Symmetry-Breaking and Chaos in Oscillatory Neural Networks Yonghong Chen and Jianxue Xu, Xi'an Jiaotong University; and Tong Fang, Northwestern Polytechnical University, China DETC2001/VIB-21597
ASME Biennial 2001 Finding All Soultions of Non-Linear Oscillators Via Interval Analysis K. Karashima and M. Nakai, Kyoto University, Kyoto, Japan DETC2001/VIB-21623
ASME Biennial 2001 Experimental and Simulational Investional of Chaotic Behavior in Bilinear Systme with Clearance M. Z. Hossain, K. Mizutani, and H. Sawai, Mie University, Mie, Japan DETC2001/VIB-21624
ASME Biennial 2001 Bifurcations and Chaos in Forced, Coupled Pendula K. Yagasaki, Gifu Unviersity, Gifu, Japan DETC2001/VIB-21625
ASME Biennial 2001 Chaotic Motion in the Vicinity of Separatrix of a Parametrically Driven Duffing Oscillatior with Twin-Well Potentials A. Luo, Southern Illinois University Edwardsville, IL, USA DETC2001/VIB-21626
ASME Biennial 2001 A Study of Chaotic Motion on Nonlinear Vibration-Isolation System Q. Ouyang, S. J. Zhu and Y. Shi, Navy University of Engineering, Hubei, China DETC2001/VIB-21627
ASME Biennial 2001 Comparing Different Strategies for Matching Two 3D Point Sets Using a Multivariable Minimizer Sander Spanjaard, Joris S. M. Vergeest, Delft University of Technology DETC2001/CIE-21242
ASME Biennial 2001 Integrating Design Process Knowledge with CAD Models Erik E. Hayes, William C. Regli, Drexel University DETC2001/CIE-21247
ASME Biennial 2001 Container Spaces and Functional Features for Top-Down 3D Layout Design A. Csabai, P. Xirouchakis, Swiss Federal Institute of Technology DETC2001/CIE-21229
ASME Biennial 2001 Information Sharing within a Distributed Collaborative Design: A Case Study Steven P. MacGregor, Avril I.Thomson, Neal P. Juster, University of Strathclyde DETC2001/CIE-21230
ASME Biennial 2001 Swirl Distribution Effects on the Thermal Characteristics of Premixed Flames Sean Archer, Ashwani K. Gupta, University of Maryland DETC2001/CIE-21676
ASME Biennial 2001 Temperature and Smoke Prediction in Structural Fires Hyeong-Jin Kim, David G. Lilley, Lilley & Associates DETC2001/CIE-21677
ASME Biennial 2001 Preliminary Design of Wind Turbine Blades for Manufacture Using Local Capabilities Sarim N. Al-Zubaidy, University of Ballarat; Jacqueline Bridge, Alwyn Johnson, University of Technology DETC2001/CIE-21678
ASME Biennial 2001 Particle Tracking in Combustion Chamber of Solid Rocket Motor Yumin Xiao, R. S. Amano, University of Wisconsin at Milwaukee; Timin Cai, Jiang Li, Guoqiang He, Northwestern Polytechnical University DETC2001/CIE-21760
ASME Biennial 2001 Design Sensitivity Analysis for Meshfree Shell Structure K.K. Choi,N.H. Kim, University of Iowa DETC2001/DAC-21042
ASME Biennial 2001 Computational Performance of Wavelet-Based Meshless Methods in the Solution of Very Large Scale Elasticity Problems A. Diaz, Michigan State University, K. Yamaura, Fujitsu America DETC2001/DAC-21047
ASME Biennial 2001 Large-Scale, Multidisciplinary Optimization of a Vehicle System in a Scalable, High Performance Computing Environment S. Kodiyalam, SGI, R.J. Yang, L. Gu, C-H. Tho, Ford Research Laboratory DETC2001/DAC-21082
ASME Biennial 2001 Alternate Sampling Methods for use with Multidisciplinary Design Optimization in a High Performance Computing Environment S. Kodiyalam, SGI, J. Sobieszczanski-Sobieski, NASA Langley DETC2001/DAC-21081
ASME Biennial 2001 Extraction of Cad Tool Requirements from Industry and from Experimental Design Projects T. Wiegers, J.S. M. Vergeest, Delft University of Technology DETC2001/DAC-21144
ASME Biennial 2001 A CAD Methodology For Concurrent Design Of A Fuel Tank Lid M. Carfagni, L. Landi, Università di Firenze DETC2001/DAC-21034
ASME Biennial 2001 Home: House of Modular Enhancement for Product Redesign for Modularization P. Gu, University of Calgary, J. Sand, G. Watson, University of Saskatchewan DETC2001/DAC-21064
ASME Biennial 2001 A Dedicated CAD/CAM System for 5-axis Machining of Marine Propellers J-W. Youn, Taegu University, Y. Jun, S. Park, Korea Institute of Science & Technology DETC2001/DAC-21077
ASME Biennial 2001 A Family of 3-DOF - Translational Parallel Manipulators M. Carricato, V.Parenti-Castelli, University of Bologna DETC2001/DAC-21035
ASME Biennial 2001 A General Method for Computing the Reachable Space of Mechanisms A. Fuhrmann, Daimler Chrysler Research and Technology, E. Shomer, Max -Plank-Institut fur Informatik DETC2001/DAC-21057
ASME Biennial 2001 A Quadratic Form-Based Approach to Identification of Kinematic Chains in Structural Analysis and Synthesis of Mechanisms P. He, W. Zhang, Univerity of Saskatchewan, Q. Li University of Adelaide DETC2001/DAC-21067
ASME Biennial 2001 Screw Theory Based Metrology for Design and Error Compensation of Machine Tools S-K. Moon, Y-M. Moon, S. Kota, University of Michigan, R.G. Landers, University of Missouri DETC2001/DAC-21083
ASME Biennial 2001 Concepts and Applications of Probabilistic Design Julian D. Booker, University of Bristol DETC2001/DFM-21164
ASME Biennial 2001 Analytical Methods to Evaluate Failure Potential During High-Risk Component Development Irem Y. Tumer, NASA Ames Research Center; Robert B. Stone, University of Missouri at Rolla DETC2001/DFM-21173
ASME Biennial 2001 Design for Robustness of Product Families for Current and Future Markets Venkat Allada, University of M issouri at Rolla; Lan Jiang, University of Missouri at Rolla DETC2001/DFM-21177
ASME Biennial 2001 An Impact Analysis Methodology for Design of Products and Processes for Reliability and Quality David He, Angela Adamyan, University of Illinois at Chicago DETC2001/DFM-21181
ASME Biennial 2001 Predicting Change Propogation in Complex Design John Clarkson, Caroline Simons, Claudia Eckert, University of Cambridge DETC2001/DTM-21698
ASME Biennial 2001 A Framework for Sufficiency Estimation of Engineering Design Models Rajesh Radhakrishnan, Daniel McAdams, University of Buffalo DETC2001/DTM-21703
ASME Biennial 2001 Developing Bayesian Surrogates for Use in Preliminary Design Jorge Pacheco, Christin Amon, Susan Finger, Carnegie Mellon University DETC2001/DTM-21701
ASME Biennial 2001 RedesignIT - A Constraint-Based Tool for Managing Design Changes Gabriel Ollinger, Thomas Stahovich, Carnegie Mellon University DETC2001/DTM-21702
ASME Biennial 2001 A Component Mode Synthesis Look at Planar Beam Elements J.P. Meijaard, and A.L. Schwab, Delft University of Technology, Netherlands DETC2001/VIB-21313
ASME Biennial 2001 On the Theory of Multibody Mechanisms for Elastic Bodies with Integrated Piezoelectric Actors and Sensors Michael Rose, and Delf Sachau, German Aerospace Research Establishment (DLR), Germany DETC2001/VIB-21314
ASME Biennial 2001 A Relative Coordinate Formulation for Finite Element Nonlinear Analysis Daesung Bae, Hanyang University; J.H. Choi, Kyunghee University; Junghun Park, FunctionBay, Inc., South Korea DETC2001/VIB-21315
ASME Biennial 2001 A Unified Development of Basis Reduction Methods for Rotor Blades G.C. Ruzicka, Ames Research Center, and D.H. Hodges, Georgia Institute of Technology DETC2001/VIB-21316
ASME Biennial 2001 A Proposal of Advanced Modeling for Motion and Vibration Analysis in Flexible Structures Takahito Sagane, Takashi Shono, Nihon University; Hiroshi Tajima, Komatsu Ltd.; and Kazuto Seto, Nihon University, Japan DETC2001/VIB-21317
ASME Biennial 2001 Mechanical Noise Identification Using Time-Frequency Representations Min-chun Pan, National Central University, Taiwan DETC2001/VIB-21005
ASME Biennial 2001 A Time-Frequency Envelope Estimation Method for Detection of Bearing- Localized Defects Nikolas G. Nikolaou and Ioannis A. Antoniadis, National Technical University of Athens, Greece DETC2001/VIB-21006
ASME Biennial 2001 Non-Stationary Response of Non-Linear SDOF Systems by Perturbation of Wavelet Coefficients Pranesh Chatterjee and Biswajit Basu, Jadavpur University, Calcutta, India DETC2001/VIB-21007
ASME Biennial 2001 A Wavelet-Logarithmic Decrement to Identify Damping in MDOF Systems: Theory and Applications C. H. Lamarque and S. Pernot, Ecole Nationale des Travaux Publics de l'Etat, France DETC2001/VIB-21008
ASME Biennial 2001 Active Control of Wind-induced Building Vibration Using a Linear Coupling Strategy S. Mohammed Hashemi and M. F. Golnaraghi, University of Waterloo, Canada DETC2001/VIB-21418
ASME Biennial 2001 Dynamics and Control of an Elastic Guideway under a Moving Mass Hanno Reckmann and Karl Popp, Universitat Hannover, Germany DETC2001/VIB-21419
ASME Biennial 2001 Feedback Control of Truss Structures with Disturbed Flexibility Sandrine Kevorkian and Madeleine Pascal, Laboratoire de Modelisation en Mechanique, Universite Pierre et Marie Curie (Paris VI), France DETC2001/VIB-21420
ASME Biennial 2001 Optimal Control Design of a Bimorph Optical Beam Deflector Paul C. P. Chao, Jeng-Sheng Huang, Rong-Fong Fung, and Ching-Lung Ou Yang, Chung Yuan Christian University, Taiwan DETC2001/VIB-21421
ASME Biennial 2001 Parametric Control of an Axially Moving String via Fuzzy Sliding-Mode and Fuzzy Neural Network Methods Cheng-Liang Lai, Jeng-Sheng Huang, and Paul C. P. Chao, Chung Yuan Christian University, Taiwan DETC2001/VIB-21422
ASME Biennial 2001 Effect of Piezoceramic Hysteresis in Passive and Hybrid Structural Acoustic Control M. B. Ozer and T. J. Royston, University of Illinois at Chicago DETC2001/VIB-21465
ASME Biennial 2001 A Unified Model for Hysteresis in Ferroic Materials R. Smith and J. Massad, North Carolina State University DETC2001/VIB-21466
ASME Biennial 2001 Computational Methods for Nonsmooth Acoustic Systems Arising in an Electromagnetic Hysteresis Identification Problem H. T. Banks and J. K. Raye, North Carolina State University DETC2001/VIB-21467
ASME Biennial 2001 Parameter Identification for Preisach Models of Hysteresis W. S. Galinaitis, Ferrum College, and D. S. Joseph and R. C. Rogers, V irginia Tech DETC2001/VIB-21468
ASME Biennial 2001 Modeling Hysteretic Stess-Strain Relationships with Graphical User Interface Y. Zhang, Michelin Americas Research and Development Corporation DETC2001/VIB-21469
ASME Biennial 2001 Identification of Coulomb and Viscous Friction in Forced Oscillators J. W. Liang, Ming Chi Institute of Technology, Taiwan, and B. Feeny, Michigan State University DETC2001/VIB-21504
ASME Biennial 2001 Stability and Bifurcation for the Non-Equispaced Periodic Motion of a Horizontal Impact Damper A. Luo, Southern Illinois University, Edwardsville DETC2001/VIB-21505
ASME Biennial 2001 CVT Gear Noise in the Hybrid Car Drive Train S. Maier, Technical University of Munich, Germany DETC2001/VIB-21506
ASME Biennial 2001 Dynamics of Mechanisms with Slider Joints and Clearance D. Marghitu and D. Stoenescu, Auburn University DETC2001/VIB-21507
ASME Biennial 2001 Squeal of a Wheel Brake with Double Shoes M. Nakai, T. Matsushita, Kyoto University; and M. Yokoi, Osaka Sangyo University, Japan DETC2001/VIB-21508
ASME Biennial 2001 Applying Nonlinear Bend Theory for Turbo-driven Pump Assembly Vibration Activity Reduction (Presentation Only) Vilen Royzman and Veronica Boyeva, Technological University of Podilla, Khmelnitskiy, Ukraine DETC2001/VIB-21546
ASME Biennial 2001 Nonlinear Behavior of Flexible Rotor-Bearing System of Aero Gas Turbine Sanjay Barad, R. Giridhar and P.S. Kasthuri Rangan, Gas Turbine Research, Bangalore, India DETC2001/VIB-21550
ASME Biennial 2001 Identification of Pedestal Parameters in Rotor-Bearing-Pedestal Systems Using Known Unbalance N. S. Feng and E. J. Hahn, University of New South wales, Sydney, Australia DETC2001/VIB-21553
ASME Biennial 2001 Experimental Non linear Model Updating Applied in Cylindrical Journal Bearings S. J. Idehara, K. L. Cavalca, F. G. Dedini and R. Pederiva, Unicamp, Sao Paulo, Brazil DETC2001/VIB-21549
ASME Biennial 2001 Stability of Motorcycles Under Acceleration and Bracking David J. N. Limebeer, Simos Evangelou, Imperial College of Science, Technology, and Medicine; Sharp, Robin S., Cranfield University, United Kingdom DETC2001/VIB-21603
ASME Biennial 2001 Linear and Nonlinear Dynamical Coupling of a Class of Electro-Mechanical Systems Stefano Vidoli and Fabrizio Vestroni, Università di Roma "La Sapienza", Italy DETC2001/VIB-21620
ASME Biennial 2001 Stochastic Car Vibrations With Strong Nonlinearities Walter V. Wedig, University of Karlsruhe; and Utz von Wagner, Technical University of Darmstadt, Germany DETC2001/VIB-21605
ASME Biennial 2001 Analysis of Load Dependent Dynamic Transmission Error Response of Gears With Random Pitch Error Janos Márialigeti and L. Lovas, Budapest University of Technology and Economics, Hungary DETC2001/VIB-21619
ASME Biennial 2001 Application of Mechanized Mathematics in Rotor Dynamics L. G. Wang, W. H. Huang, and C. Hu, Harbin Institute of Technology, Harbin, China DETC2001/VIB-21628
ASME Biennial 2001 Vibration of an Asymmetrical Shaft with Gravity and Nonlinear Spring Characteristics (Major Critical Speed and Secondary Critical Speed) Y. Ishida, T. Inoue, J. Liu, and A. Suzuki, Nagoya University, Nagoya, Japan DETC2001/VIB-21629
ASME Biennial 2001 The Swing Vibration and Transverse Oscillation of a Cracked Rotor and the Intermittence Chaos G. Meng, Shangahi Jiaotong University, Shanghai, and W. Y. Qin and T. Zhang, Northwestern Polytechnical University, Xi'an, China DETC2001/VIB-21631
ASME Biennial 2001 Mechanical Fault Diagnois for Abnormal Vibration Excited by Steam in High Pressure Turbine of Turbo-Generator Set X. Y. He, L. Chen, and Y. F. Zhang, Tsinghua University, Beijing, China DETC2001/VIB-21632
ASME Biennial 2001 Development of the STEP-to-DB Converter for the Web based PDM Sun-Ho Kim, Myong-Ji University; Yong-Mun Jeong, Daewoo International Systems Incorporated DETC2001/CIE-21227
ASME Biennial 2001 Integrated Genome-Like Product Database and Management System Ah-Kat Tan, NgeeAnn Polytechnic; Elivio Bonollo, University of Canberra DETC2001/CIE-21240
ASME Biennial 2001 Integration of Data Management Systems with an Ontology Based Information Management System T. C. Wijnker, D. Lutters, F. J. A. M. van Houten, H. J. J. Kals, University of Twente DETC2001/CIE-21248
ASME Biennial 2001 Dynamic Configuration Evolution of Distributed Concurrent Engineering Design in Object-Oriented Databases A. Al-Khudair, W. A.Gray, J. C. Miles, Cardiff University DETC2001/CIE-21251
ASME Biennial 2001 Experimental Measurements and Computations of Heat Transfer and Flow Friction Factor in a Staggered Pin Fin Array Forrest E. Ames, Christopher S. Solberg, Michael D. Goman, Daniel J. Curtis, Bradley T. Steinbrecker, University of North Dakota DETC2001/CIE-21761
ASME Biennial 2001 Compuational Study of Two-Passage Turbine Guide-Vane Cascade with End-Wall Contouring Bin Zhu, Yu -liang Lin, Tom I.P. Sm ith, Michigan State University; Rohit Oke, Terry W. Simon, University of Minnesota; Minking Chyu, University of Pittsburgh DETC2001/CIE-21762
ASME Biennial 2001 Computational Analysis of Pitch-Width Effects on the Losses of Turbine Blades C. Xu, R. S. Amano, University of Wisconsin at Milwaukee DETC2001/CIE-21764
ASME Biennial 2001 Relative Cooling with Liquid for Gas Turbines: Part 1 - A Solution for Exceeding 2000K at Turbine Inlet Sandu Constantin, SC Turbomecanica, SA; Dan Brasoveanu, University of Maryland DETC2001/CIE-21763
ASME Biennial 2001 Relative Cooling with Liquid for Gas Turbines: Part 2 - Design Considerations and Efficiency Sandu Constantin, SC Turbomecanica, SA; Dan Brasoveanu, University of Maryland DETC2001/CIE-21776
ASME Biennial 2001 A Comparison of Polynomial Based Regression Models in Vehicle Safety Analysis L. Gu, Ford Motor Company DETC2001/DAC-21063
ASME Biennial 2001 Concept Development of a Tie-Down Temporary Concrete Barrier System J. Reid, University of Nebraska -Lincoln DETC2001/DAC-21117
ASME Biennial 2001 Optimal Structural Topology Design for Energy Absorption: A Heuristic Approach C. Soto, Ford Research Laboratory DETC2001/DAC-21126
ASME Biennial 2001 A Study on Shape Optimization Using Affine Transformation S. Kitayama, H. Yamakawa, Waseda University DETC2001/DAC-21080
ASME Biennial 2001 Concurrent Parametric Design Using a Multifunctional Team Approach L. Chen, S. Li., University of Toronto DETC2001/DAC-21038
ASME Biennial 2001 Towards Formal Framework For Sequential Design Tasks M. Dzbor, Z. Zdrahal, Open University, UK DETC2001/DAC-21049
ASME Biennial 2001 Automatic Synthesis of Cooling System Design for Plastic Injection Mould C.L. Li, City University of Hong Kong DETC2001/DAC-21097
ASME Biennial 2001 Proposal of an Integrated Design Support Environment Based on the Model of Synthesis M. Yoshioka, National Institute of Informatics, Y. Nomaguchi, T. Tomiyama, University of Tokyo DETC2001/DAC-21155
ASME Biennial 2001 Classification Of Design For PRSS Linkages H. Su, J.M. McCarthy, University of California, Irvine DETC2001/DAC-21104
ASME Biennial 2001 Gradation of Linkage Mechanisms for Robot Arms Based on Their Structureal Error Performance P. Pathapati, Seetha Polytechnic College DETC2001/DAC-21113
ASME Biennial 2001 Geometric Insight into the Dynamics of a Rigid Body using the spatial triangle of screws G.R. Pennock, Purdue University, P.J. Meehan, General Motors DETC2001/DAC-21114
ASME Biennial 2001 Dynamics of a Multibody Mechanical System with Lubricated Long Journal Bearings B.J. Alshaer, H.M. Lankarani, Wichita State University, S. Shivaswamy, Cessena Aircraft DETC2001/DAC-21091
ASME Biennial 2001 Process Planning In Layer-Based Machining Z. Y. Yang, Y. H. Chen, University of Hong Kong DETC2001/DFM-21165
ASME Biennial 2001 Some Geometric Techniques To Reduce Build Time In LOM Ajay Joneja, Pang King Wah, Hong Kong University of Science and Technology DETC2001/DFM-21180
ASME Biennial 2001 Void Elimination Algorithm For Extrusion Based Layered Manufacturing Noshir A. Langrana, Dan Qiu, Rutgers University DETC2001/DFM-21197
ASME Biennial 2001 Application Of A Genetic Algorithm For Segmentation Of A Ship Hull For Ff- Tlom And For 3-Axis Milling Herbert J. Koelman, SARC BV; Imre Horvath, Delft University of Technology DETC2001/DFM-21198
ASME Biennial 2001 Research Methods for Design Theory Derrick Tate, Axiomatic Design Software Incorporated; Mats Nordlund, Saab Marine Electronics AB DETC2001/DTM-21694
ASME Biennial 2001 Implementation of DFE in the Daily Design Work - An Approach Derived from Surveys Marc Ernzer, Chris Gruner, Herbert Birkhofer DETC2001/DTM-21706
ASME Biennial 2001 A View of Design Theory and Methodology from the Standpoint of Design Freedom William Wood, University of Maryland DETC2001/DTM-21717
ASME Biennial 2001 Orchestrating Learning in a Graduate Engineering Design Course Mathew Chamberlain, Christopher Williams, Scott Cowan, Farrokh Mistree, Georgia Institute of Technology DETC2001/DTM-21705
ASME Biennial 2001 Engineering Design in New Zealand-Internet Innovation at Canterbury Crispin Hales, Triodyne; Shayne Gooch, University of Canterbury; John Raine, University of Canterbury DETC2001/IED-21206
ASME Biennial 2001 The Development and Adoption of VIDDEO(Virtual Development Enterprise for Europe) in European Wide Product Development Projects Avril Thomson, W. J. Ion, B. K Temple, M. Allan, N. Kernohan, S. Davidson, University of Strathclyde DETC2001/IED-21207
ASME Biennial 2001 Internatioanl Tele-Collaborative Mechatronic Design and Competition Amiram Moshaiov, Tel Aviv University DETC2001/IED-21219
ASME Biennial 2001 Experiences in Integrating the Product Realization Process into the Design Curriculum Philip Doepker, Andrew P. Murray, University of Dayton DETC2001/IED-21210
ASME Biennial 2001 Learning From Students About Decision Tools in Design Reid Bailey, Phil Doepker, University of Dayton DETC2001/IED-21211
ASME Biennial 2001 A New Sparse Solver for Kinematics Simulation of Multibody Systems in Natural Coordinates Based on Tearing Methods F.J. Funes, Telefonica; J.M. Jimenez, J.I. Rodriguez, STT; and J. Garcia de Jalon, Universidad Politecnica de Madrid, Spain DETC2001/VIB-21318
ASME Biennial 2001 A Recursive Implementation Method With Implicit Integration for Multibody Dynamics H.J. Cho, H.S. Ryu, and D.S. Bae, Hanyang University; and J.H. Choi, Kyounghee University, South Korea DETC2001/VIB-21319
ASME Biennial 2001 A Precise and Stiffly Stable Time Integration Method for Vibration Equations Takeshi Fujikawa, Ashiya University; and Etsujiro Imanishi, Kobe Steel, Japan DETC2001/VIB-21320
ASME Biennial 2001 A Method for Constraints Stabilization on Solving Multibody Dynamics Koichi Koganezawa and Kazuomi Kaneko, Tokai University, Japan DETC2001/VIB-21322
ASME Biennial 2001 Jorgen Lund: A Perspective on His Contributions to Modern Rotordynamics (Invited Paper) Anthony J. Smalley, Southwest Research Institute DETC2001/VIB-21368
ASME Biennial 2001 The Scientific Work of Jorgen Lund and a Personal Assessment of its Significance (Invited Paper) Neville Rieger, STI Technologies Inc DETC2001/VIB-21369
ASME Biennial 2001 The Multiple Contributions of Jorgen Lund's Ph.D. Dissertation " Self-Excited Stationary Whirl Orbits of a Journal in Sleeve Bearings" RPI 1966 Engineering Mechanics (Invited Paper) Dara W Childs, Texas A&M University DETC2001/VIB-21370
ASME Biennial 2001 Lund's Pad Assembly Method for Tilting Pad Journal Bearings (Invited Paper) John Nicholas, Rotating Machinery Technology Inc DETC2001/VIB-21371
ASME Biennial 2001 Lund's Elliptic Orbit Forced Response Analysis: The Keystone of Modern Rotating Machinery Analysis (Invited Paper) Gordon Kirk, Virginia Polytechnic Institute and State University DETC2001/VIB-21372
ASME Biennial 2001 Coupled Torsion-Lateral Stability of a Shaft-Disk System Driven Through a Universal Joint H. A. DeSmidt, K. W. Wang, and E. C. Smith, Pennsylvania State University DETC2001/VIB-21423
ASME Biennial 2001 Quasi-Periodic Motions of Articulated Pipes Conveying Flowing Fluid Zsolt Szabo, Budapest University of Technology and Economics, Hungary DETC2001/VIB-21424
ASME Biennial 2001 Aeroelastic Oscillations of a Double Seesaw Oscillator H. Lumbanobing and T. I. Haaker, Delft Univ. of Technology, Netherlands DETC2001/VIB-21425
ASME Biennial 2001 On Asymptotic Approximations of First Integrals for Weakly Nonlinear Oscillators S. B. Waluya and W. T. van Horssen, Delft Univ. of Technology, Netherlands DETC2001/VIB-21426
ASME Biennial 2001 Nonlinear Adaptive Control of Flexible Structures O. N. Ashour and A. H. Nayfeh, Virginia Tech DETC2001/VIB-21470
ASME Biennial 2001 Narrowband Control Design for Smart Structural Systems D. J. Kolepp and R. C. Smith, North Carolina State University DETC2001/VIB-21471
ASME Biennial 2001 Comparison of Robust Residual Vibration Suppression Capabilities of Conventional Digital Filters D. Economou, National Technical University of Athens, Greece, C. Mavroidis, Rutgers University; and I. Antoniadis, National Technical University of Athens DETC2001/VIB-21472
ASME Biennial 2001 Radial Direction Position Control of a Disk Type Integrated Motor-Bearing System W-S. Han, SAIT, Korea, C-W Lee and S -H Park, KAIST, Korea, and Y. Okada, Ibaraki University, Japan DETC2001/VIB-21473
ASME Biennial 2001 Friction Induced Brake Vibrations M. Rudolph and K. Popp, University of Hannover, Germany DETC2001/VIB-21509
ASME Biennial 2001 Stability Analysis of a Free-Standing Block with Friction on a Moving Foundation A. Sinopoli, Universita degli Studi di Roma La Sapienza and A. Ageno, Universita degli Studi di Firenze, Italy DETC2001/VIB-21510
ASME Biennial 2001 Spatial Contact Mechanics of CVT Chain Drives M. Sedlmayr and F. Pfeiffer, Technical University of Munich, Germany DETC2001/VIB-21511
ASME Biennial 2001 Development and Experimental Validation of a Point Contact Model for Dynamical Problems with Friction W. Sextro, University of Hannover, Germany DETC2001/VIB-21512
ASME Biennial 2001 A Mobil Mechanism with Slant Leg on a Vibratory Floor H. Yamaguchi and M. Yashlma, National Defense Academy, Yokosuka, Japan DETC2001/VIB-21513
ASME Biennial 2001 Theoretical and Experimental Study of the Dynamics of the Tripod-ball Sliding Joint with Clearance, Tsinghua University, Beijing, Chin Jia Xiaohong, Ji Linhong, Jin Dewen and Zhang Jichuan, Tsinghua University, Beijing, China DETC2001/VIB-21555
ASME Biennial 2001 Effects of Initial Geometric Imperfections on Parametric Instability of Rectangular Plates G. L. Ostiguy and L. St-Georges, Université du Québec, Chicoutoumi, Canada DETC2001/VIB-21551
ASME Biennial 2001 Experimental Response of a Preloaded Vibro-Impacting Hertzian Contact J, Perret-Liaudet and E, Rigaud, Ecole Centrale de Lyon, France DETC2001/VIB-21547
ASME Biennial 2001 Experimental Investigation of Dry Friction Damping and Cubic Stiffness Nonlinearity A.B Stanbridge, D.J. Ewins, K.Y. Sanliturk and J.V, Ferreira, Imperial College, London, United Kingdom DETC2001/VIB-21556
ASME Biennial 2001 Stick-Slip Dynamics of a Two-Degree-of-Freedom System Jan Awrejcewicz and Pawel Olejnik, Technical University of Lodz, Poland DETC2001/VIB-21611
ASME Biennial 2001 Nonlinear Dynamics of the Woodpecker Toy Remco I. Leine, Dick H. van Campen, Eindhoven University of Technology, Netherlands; and Christoph Glocker, Institute of Mechanics Systems, Germany DETC2001/VIB-21608
ASME Biennial 2001 Power-Electronics Converters: A Field Rich in Discontinuities Ali H. Nayfeh and Sudip K. Mazumder, Virginia Polytechnic Institute and State University DETC2001/VIB-21621
ASME Biennial 2001 Prediction for the Rub-Impact Phenomena in Rotor Systems Z. Q. Wu and Y. S. Chen, Tianjin University, Tianjin, China DETC2001/VIB-21633
ASME Biennial 2001 Nonlinear Dynamic Analysis of Partial Rotor Rub with Experimental Observations Y. S. Choi and C. Y. Bae, SungKyunKwan Universtiy, Suwon, Korea DETC2001/VIB-21634
ASME Biennial 2001 Influence of Seal Geometry on the Rotrodynamic Characteristics of a Round-Hole Pattern Damping Seal J. Darden and E. Earhart, NASA Marshall Space Flight Center, Alabama, USA; G. Flowers, Auburn University, Alabama, USA DETC2001/VIB-21635
ASME Biennial 2001 Study on Nonlinear Dynamic Charaters of Rotor-Bearing System S. B. Xia, X. J. Zhang, X. H. Wu, G.F. Xu, Harbin Institute of Technology, Harbin, China DETC2001/VIB-21636
ASME Biennial 2001 Dynamic Analysis of Unsymetrical Flexible Rotor-Bearing-Foundation System under an Unsteady Oil-Film Force Z. S. Liu, Harbin Institute of Technology, Harbin, China DETC2001/VIB-21637
ASME Biennial 2001 Integration of Requirements Management and Product Data Management Systems Daniel Svensson, Johan Malmqvist, Chalmers University of Technology DETC2001/CIE-21246
ASME Biennial 2001 S-CIMS: Towards Integrated and Environmentally Conscious Manufacturing Systems Genbao Zhang, Yin Liu, Zhongquan Huang, Wei Tan, Chongqing University DETC2001/CIE-21232
ASME Biennial 2001 Providion of Industrial Information Resources Through Hypermedia Richard M. Crowder, Gary Wils, Wendy Hall, University of Southampton DETC2001/CIE-21236
ASME Biennial 2001 Disassembly Aimed at Product Remanufacturing A. J. D. Lambert, Technische Universiteit Eindhoven DETC2001/CIE-21252
ASME Biennial 2001 A Study on Distributed CIMS Analysis and Design Renwang Li, Renbin Xiao, Huazhong University of Science and Technology; Guoning Qi, Hangzhou Steam Turbine Company, Ltd. DETC2001/CIE-21253
ASME Biennial 2001 Computer-Generated Virtual/Physical Reality: Blurring the Lines Harry C. Petersen, Andrzej Markowski, Paul Sullivan, Minnesota State University; Robert Petersen, Pro Media Productions DETC2001/CIE-21671
ASME Biennial 2001 An Intelligent Zone-Based Delivery Scheduling Approach H. Wang, D. Xue, University of Calgary DETC2001/CIE-21672
ASME Biennial 2001 Fuzzy Cell Mapping Allied to Autonomous Systems Y. Song, D. Edwards, University of Idaho; V. S. Manoranjan, Washington State University DETC2001/CIE-21673
ASME Biennial 2001 Fuzzy Logic Application in Data Acquisition Dileep R. Sule, Tory K. Watkins, Louisiana Tech University; David Restifo, Naval Sea Systems Command DETC2001/CIE-21250
ASME Biennial 2001 An Ant Algorithm Approach to the Isomorphism Identification of Mechanism Kinematic Chains Renbin Xiao, Jinghua He, Ming Chang, Hanmin Shi, Huazhong University of Science and Technology DETC2001/CIE-21674
ASME Biennial 2001 Hybrid Analysis Method for Reliability-Based Design Optimization K.K. Choi, B.D. Youn, University of Iowa DETC2001/DAC-21044
ASME Biennial 2001 An Approach to Robust Design Employing Computer Experiments J. Lee, D.J. Li,N. Soderborg, A. Sudjianto, M. Vora, S.C. Wang, Ford Motor Company DETC2001/DAC-21095
ASME Biennial 2001 A Direct Statistical Formulation to Account for Uncertainty in Mechanical Design M. Ogot, H. Kumar, Rutgers University DETC2001/DAC-21109
ASME Biennial 2001 Stable Evaluation of Probabilistic Constraint in Reliability-Based Design Optimization for Large Deformation Problem Y.H. Park, New Mexico State University DETC2001/DAC-21112
ASME Biennial 2001 Decomposition-based Assembly Synthesis for Maximum Structural Strength and Modularity O.L. Cetin, K. Saitou, University of Michigan DETC2001/DAC-21121
ASME Biennial 2001 Aesthetic Design of Machine Systems Using Evaluation Maps M. Yoshimura, S. Horie, Kyoto University DETC2001/DAC-21154
ASME Biennial 2001 A Multi-Project Management Approach for Distributed Projects Management F. Marle, Ecole Centrale de Paris DETC2001/DAC-21102
ASME Biennial 2001 Chinese Natural Language Oriented Dynamic Knowledge Extraction: A Case Study of Intelligent Design R. Xiao, H. Zhan, M.Su, Huazhong University DETC2001/DAC-21147
ASME Biennial 2001 Optima Smart Actuator Integration to Reduce Vibration in High Speed Mechanical Systems J.S. Rastegar, L. Yuan, State University of New York at Stony Brook DETC2001/DAC-21116
ASME Biennial 2001 Planar Cable Direct Driven Robots, Part I: Kinematics and Statics P. Gallina, A. Rossi, University of Padova, B. Williams, Ohio University DETC2001/DAC-21145
ASME Biennial 2001 A Versatile Design Platform For A Walking Robot In Harsh Environments S. Lupien, École de Technologie Supérieure DETC2001/DAC-21101
ASME Biennial 2001 Innovative Design Of A Thrust-Eccentric Gear Coupling For Submerged-Motor- Driven PC Pumping System S. Wang, Shenyang University of Technology DETC2001/DAC-21140
ASME Biennial 2001 Formulation of Dynamic Loads Generated by Lubricated Journal Bearings B.J. Alshaer, H.M. Lankarani, Wichita State University DETC2001/DAC-21090
ASME Biennial 2001 Comprehensive Satisfactory Design Method For Product Design Eiji Adachi, Toyota Technological Institute DETC2001/DFM-21160
ASME Biennial 2001 Computer Based GD&T Advisor Based On Good Practice Rules Jami J. Shah, Sanjay Ramaswamy, Arizona State University DETC2001/DFM-21172
ASME Biennial 2001 High Production Manufacturing Considerations for Metallic Compliant mechanisms with long thin beams Spencer Magleby, Brigham Young University; Aaron Herring, IBM DETC2001/DFM-21184
ASME Biennial 2001 Offset Blending Applied To Virtual Package Design Ranga Narayanaswami, Lalit Ahuja, Iowa State University DETC2001/DFM-21189
ASME Biennial 2001 Transformation Invariant Shape Similarity Comparison of Solid Models with Applications to DFM William C. Regli, David McWherter, Mitchell Peabody, Ali Shokoufandeh, Drexel University DETC2001/DFM-21191
ASME Biennial 2001 Design on an International Project Philip Pfund, Fermi National Accelerator Lab DETC2001/IED-21212
ASME Biennial 2001 Global Engineering Design Team (GEDT) - A Business View on Structuring Undergraduate Projects Jim Baxter, Cathy Barnes, Alan de Pennington, University of Leeds; Mark Henderson, Arizona State University; Tom Bourdo, Arizona State University; Valana Wells, Arizona State University DETC2001/IED-21213
ASME Biennial 2001 Educating for Global Product Realization on a Global Scale Imre Horvath, Ernest van Breemen, Delft University of Technology; Debasish Dutta, Derek Yip-Hoi, University of Michigan; Jongwon Kim, Kunwoo Lee, Seoul National University DETC2001/IED-21214
ASME Biennial 2001 Web-Based Collaborative Product Design Review in Extended Enterprises GQ Huang, J. Y. Shen, K. L. Mak, University of Hong Kong DETC2001/IED-21215
ASME Biennial 2001 The Role of Internets to Facilitate Designer/Client Communication David Challice, Peter Hogarth, Bournemouth University DETC2001/IED-21216
ASME Biennial 2001 Early Lessons in Executing Distributive Collaborative Student Design Projects Andrew Murray, Jon M. Stevens, University of Dayton DETC2001/IED-21217
ASME Biennial 2001 Coupling of Multibody and Control Simulation Tools for the Design of Mechatronic Systems Ondrej Vaculin, Wolf-Reiner Krueger, and Martin Spieck, German Aerospace Research Center, Germany DETC2001/VIB-21323
ASME Biennial 2001 Modeling of Overactuated Closed-Loop Mechanisms with Singularities: Simulation and Control L. Ganovski, P. Fisette, and J.C. Samin, Universite Catholique de Louvain, Belgium DETC2001/VIB-21324
ASME Biennial 2001 Direct Yaw Moment Control for Motorized Wheel Electric Vehicles A. Goodarzi and G. R. Vossoughi, Sharif University, Iran; E. Esmailzadeh, University of Victoria, Canada DETC2001/VIB-21325
ASME Biennial 2001 A Control Method for Non-Linear Time-Varying System Using Mixed H_2/H_Infinity Control:Position and Force Control of 2-Link Manipulator Itsuro Kajiwara, Tokyo Institute of Technology; Katsuhiro Yambe, NGK Insulators, Ltd.; Chiaki Nishidome, Tokyo Institute of Technology, Japan DETC2001/VIB-21326
ASME Biennial 2001 The Composite Adaptive Control of Free-Floating Space Robot System with Prismatic Joint Chen Li, Fuzhou University; Liu Yanzhu, Shanghai Jiaotong University, China DETC2001/VIB-21327
ASME Biennial 2001 Lund's Contribution to Rotor Stability Analysis: The Indispensable and Fundamental Basis of Modern Compressor Design (Invited Paper) Edgar J. Gunter, University of Virginia DETC2001/VIB-21373
ASME Biennial 2001 Application of Lund's Stability Analysis Program in Design of ModernTurbomachinery (Invited Paper) Pranabesh DeChoudhury, Elliott Company DETC2001/VIB-21374
ASME Biennial 2001 Some Unusual Cases of Rotor Instability (Invited Paper) Karl-Olof Olsson, Linköping University, Sweden DETC2001/VIB-21375
ASME Biennial 2001 Jorgen W Lund : Theories Versus Tests (Invited Paper) Jorgen Tonnesen, JT Consult, Denmark DETC2001/VIB-21376
ASME Biennial 2001 Inertia Effects in SFD Bearings Generated by Circumferential Oil Supply Groove (Invited Paper) Jørgen W. Lund, Claus M. Myllerup, and Henning Hartmann, Odegaard & Danneskiold -Samsoe A/S (ODS), Denmark Panel Discussion Tony Smalley, Neville Rieger, Claus Myllerup and Jorgen Tonnesen DETC2001/VIB-21377
ASME Biennial 2001 Forced Dynamics of an Orbiting Conducting Tether Monica Pasca, Sede Architettura, Italy DETC2001/VIB-21428
ASME Biennial 2001 On the Vibrations of a Linear, and a Weakly Nonlinear Damped System Darmawijoyo, W. T. van Horssen, Delft Univ. of Technology, Netherlands DETC2001/VIB-21427
ASME Biennial 2001 Rain-Wind Induced Vibrations of a Simple Oscillator Adriaan van der Burgh, Delft Univ. of Technology, Netherlands DETC2001/VIB-21429
ASME Biennial 2001 Analysis of Parametrically Excited Nonlinear Systems via Quasi-Periodic Normal Forms (Presentation Only) Susan Wooden and Subhash Sinha, Auburn University DETC2001/VIB-21430
ASME Biennial 2001 Vibration Confinement via Optimal Eigenvector Assignment and Piezoelectric Networks J. Tang and K. W. Wang, The Pennsylvania State University DETC2001/VIB-21474
ASME Biennial 2001 Confinement and Suppression of Structural Vibrations S. Choura, Institut Prparatoire Aux Etudes D'Ingnieurs de Sfax, and A. S. Yigit, Kuwait University DETC2001/VIB-21475
ASME Biennial 2001 Modal Control for Piezo-Coupled Elastic Beams and Plates J. J. Murray, SUNY Stony Brook, G. J. Knowles, QorTek, Inc. DETC2001/VIB-21476
ASME Biennial 2001 Vibration Control of Parallel Identical Flexible Structures using Interactive Force S. Kougo, H. Fujihara, and K. Seto, Nihon University, Japan DETC2001/VIB-21477
ASME Biennial 2001 Motion and Vibration Control of Three Dimensional Flexible Shaking Table using LQI Control Approach H. Hiramatsu, K. Seto, and T. Watanabe, Nihon University, Japan DETC2001/VIB-21478
ASME Biennial 2001 Friction, Instability and Parametric Studies of a Nonlinear Model for an Aircraft Brake Whirl Analysis J. Sinou, F. Thouverez, Louis Jezequel, Laboratoire de Trabologie et Dynamique des Systemes, France, G. Mazet, Messier-Bugatti, France DETC2001/VIB-21726
ASME Biennial 2001 Reducing Friction Forces by Means of Applied Vibration Izhak Bucher, Technion, Israel, Oded Wertheim, Nextec, Israel DETC2001/VIB-21727
ASME Biennial 2001 Measurement and Identification of Friction (Presentation Only) A. Akay, Carnegie Mellon University DETC2001/VIB-21728
ASME Biennial 2001 Degenerate System Stability Analysis (Presentation Only) J. Enright, BFGoodrich Company DETC2001/VIB-21729
ASME Biennial 2001 Transient Dynamic Analysis of Friction Induced Vibration D. Glaznieks, Dunlop Aviation, England DETC2001/VIB-21730
ASME Biennial 2001 Analysis of Belt-Drive Mechanics Using a Creep-Rate Dependent Friction Law Michael J. Leamy, United States Military Academy DETC2001/VIB-21558
ASME Biennial 2001 The Influence of Nonlinear Boundary Conditions on the Nonplanar Autoparametric Responses of a Cantilever Beam Haider N. Arafat, Virginia Polytechnic Institute and State University DETC2001/VIB-21559
ASME Biennial 2001 A Comprehensive Analytical Approach to Model Disc Brake System for Squeal Prediction Anil K. Bajaj, Purdue University DETC2001/VIB-21560
ASME Biennial 2001 Nonlinear Resonance and Parametric Instability of a Power Transmission Belt: Numerical Analysis with Experiments Francesco Pellicano, Universita degli Studi di Modena e Reggio, Italy DETC2001/VIB-21561
ASME Biennial 2001 Dynamics of Oscillator With Soft Impacts Frantisek Peterka, Academy of Sciences of the Czech Republic, Czech Republic DETC2001/VIB-21609
ASME Biennial 2001 Stochastic Nonlinear Dynamics of a Beam System With Impact N. van de Wouw, A. de Kraker, H. Nijmeijer, Eindhoven University of Technology, Netherlands DETC2001/VIB-21610
ASME Biennial 2001 A Simple Method of Chaos Detection in Mechanical Systems With Discontinuities Andrzej Stefanski, Tomasz Kapitaniak, Technical University of Lodz, Poland; and John Brindley, University of Leeds, United Kingdom DETC2001/VIB-21622
ASME Biennial 2001 Comparison of the Dynamics of Low Immersion Milling and Cutting With Varying Spindle Speed Tamas Insperger and Gabor Stepan, Budapest University of Technology and Economics, Hungary DETC2001/VIB-21616
ASME Biennial 2001 Computer Aided Analysis of Nonlinear Vibrating Systems J. S. Rao and Tarun Puri, Indian Institute of Technology, New Delhi, India DETC2001/VIB-21638
ASME Biennial 2001 Application of Finite Element Method in Time Domain to a Rotor System with Nonlinear Supports L. G. Wang, W. H. Huang , and C. . Hu, Harbin Institute of Technology, Harbin, China DEC2001/VIB-21639
ASME Biennial 2001 Parameter Calculation of Single-Bagged Air Spring J. J. Lou and S. J. Zhu, Naval University of Engineering, Hubei, China DETC2001/VIB-21640
ASME Biennial 2001 Nonlinear-Design-for-Control: Deploying Nonlineaity for Useful Purposes D. Adams, Purdue University, Indiana DETC2001/VIB-21641
ASME Biennial 2001 An Experimental Study for Collision Stimulus Device Using a Maneto-Spring E. Fujita,Delta Tooling Co., Ltd., N. Soga and N. Nakagawa, Hiroshima University, Hiroshima, Japan, and E. Sugimoto, Y. Ogura and S. Kojima, Delta Tooling Co., Ltd., Japan DETC2001/VIB-21642
ASME Biennial 2001 Axial Nonlinear Mechanical Vibrations of Large Power Transformer Windings During Short Circuit J. X. Xu and Z. M. Chen, Xi'an Jiaotong University, Xi'an, China TUESDAY DETC2001/VIB-21643
ASME Biennial 2001 A Socio-Technical Approach to Knowledge Capture. Sharing and Reuse in Aerospace Design M. P. Kerr, P. E. Waterson, C. W. Clegg, University of Sheffield DETC2001/CIE-21254
ASME Biennial 2001 Estimating Technology Insertion Risk Using Fuzzy Logic Don Yates, Alley Butler, Louisiana Tech University DETC2001/CIE-21249
ASME Biennial 2001 Organizational Obstacles and Pitfalls on the Road to Product Data Management P. E. Waterson, K. Pepper, C. W. Clark, C. Fagan,University of Sheffield DETC2001/CIE-21241
ASME Biennial 2001 Product Life-Cycle Management and the Virtual Enterprise Richard H. Parr, PTC Global Services DETC2001/CIE-21228
ASME Biennial 2001 Distributed Multibody Dynamic Analysis Within Product Development Tobias Larsson, Andreas Larsson, Lenmart Karlsson, Luleå University of Technology DETC2001/CIE-21282
ASME Biennial 2001 Net Informational and Computational System for CFD Researchers Valeri Goriatchev, Mikhail Balachov, Dmitri Rykov, Tver State Technical University DETC2001/CIE-21283
ASME Biennial 2001 Design For Facility Over The Internet: A Case Study With Automotive Connecting Rod Designs Khurshid A.Qureshi, Ford Motor Company; Kazuhiro Saitou, University of Michigan DETC2001/CIE-21289
ASME Biennial 2001 Vehicle Analysis Using an Agent-Based Analysis Tools Framework Ken Gee, NASA DETC2001/CIE-21290
ASME Biennial 2001 An Information-Based Design Support System for Composite Structures Xiaochun Hu, Wei Sun, Drexel University DETC2001/CIE-21295
ASME Biennial 2001 Communication Model for the User Interface of a Shape Conceptualization System Gyorgy Kuczogi, I. Horvath, Joris S. M. Vergeest, Zoltan Rusak, Delft University of Technology DETC2001/CIE-21300
ASME Biennial 2001 Defining a Flexible Modeling Methodology for Design and Development of Automotive Powertrain Systems Mark Jennings, Michael Tiller, Kenneth R. Butts, Ford Research Laboratory DETC2001/CIE-21665
ASME Biennial 2001 Intelligent Compressor Design in a Network-Centric Environment Peter J. Ršhl, Raymond M. Kolonay, General Electric Corporate Research and Development; Michael J. Paradis, Michael W. Bailey, GE Aircraft Engines DETC2001/CIE-21667
ASME Biennial 2001 Interaction Modeling in Systems Design Rajarishi Sinha, Christian J. J. Paredis, Pradeep K.Khosla, Carnegie Mellon University DETC2001/CIE-21285
ASME Biennial 2001 Tuning a Hybrid Optimization Algorithm by Determining the Modality of the Design Space K. Hacker, J. Eddy, K. Lewis, University of Buffalo DETC2001/DAC-21093
ASME Biennial 2001 Successive Twinkling Simplex Search Optimization Algorithms M. Mekhilef, M. Trabia, University of Nevada, Las Wegas DETC2001/DAC-21132
ASME Biennial 2001 Structural Optimization of a Spherical Parallel Manipulator Using a Two-Level Approach F. Bidault, Ecole Centrale de Nantes, C-P. teng, J. Angeles, McGill University DETC2001/DAC-21030
ASME Biennial 2001 Packing Optimization using a Rubberband Analogy G. Fadel, A. Sinha, T. McKee Clemson University DETC2001/DAC-21051
ASME Biennial 2001 An Agent Based Optimization Approach to Manufacturing Process Planning S. Deshpande, J. Cagan, Carnegie Mellon University DETC2001/DAC-21032
ASME Biennial 2001 An Intelligent System for Spur Gear Design and Analysis E-S. Aziz, C. Chassapis, Stevens Institute of Technology DETC2001/DAC-21037
ASME Biennial 2001 Optimum Design Using Search Agents T. Miyashita, H. Yamakawa, Waseda University DETC2001/DAC-21011
ASME Biennial 2001 Cyberagent: Collaborative Agents for Distributed Applications over the Internet J. Shi, G.Q. Huang, K.L. Mak, The University of Hong Kong DETC2001/DAC-21073
ASME Biennial 2001 On the Extraction of Kinematic Behavior from Optimal Compliant Topologies with Application to Number Synthesis of Linkages A. Saxena, G.K. Ananthasuresh, University of Pennsylvania DETC2001/DAC-21017
ASME Biennial 2001 Toplogy Sythesis of Electro Thermal Compliant (ETC) Mechanisms using Line Elements N.D. Mankame, G.K. Ananthasuresh, University of Pennsylvania DETC2001/DAC-21019
ASME Biennial 2001 Toward the Design of Compliant Actuators with a Specified Force and Stroke M. Frecker, S. Bharti, Penn State University DETC2001/DAC-21054
ASME Biennial 2001 The Investigation of Compliant Centrifugal Clutch Designs N.B. Crane, Pratt & Whitney, B.L. Weight, L. Howell, Brigham Young University DETC2001/DAC-21071
ASME Biennial 2001 Qualitative Reasoning for Decision Synthesis David O. Kazmer, Liang Zhu, University of Massachusetts at Amherst DETC2001/DFM-21162
ASME Biennial 2001 Force Based Model For Automated Surface Roughness Prediction In Slot Milling Refat M. El-Zahry, A. Sarhan, A. A. Nasr, Assiut University DETC2001/DFM-21163
ASME Biennial 2001 Design Process Error Proofing: International Industry Survey and Research Roadmap Kurt A. Beiter, Lawrence P. Chao, Kosuke Ishii, Stanford University DETC2001/DFM-21196
ASME Biennial 2001 Possible Sources Of Sub-Optimization In Design For Manufacture: An Initial Survey I-S. Fan, M. J. Gregory, Cranfield University DETC2001/DFM-21205
ASME Biennial 2001 Toward Biomimetic Concept Generation V. Vakili, L. Shu, University of Toronto DETC2001/DTM-21715
ASME Biennial 2001 Influence of Design Representation on Effectiveness of Idea Generation Felicia McKoy, Noe Vargas-Hernandez, Joshua Summers, Jami Shah, Arizona State University DETC2001/DTM-21685
ASME Biennial 2001 Objective Based Modular Product Design: Concept Selection Chris Mattson, Spencer Magleby, Brigham Young University DETC2001/DTM-21712
ASME Biennial 2001 Close-to-the-Desired Methods of Multiobjective Optimization - Some Comments and Questions JiGuan Lin, Linsys Corporation DETC2001/DTM-21707
ASME Biennial 2001 The Idea of Complementarity in Multibody Dynamics Friedrich Pfeiffer, Technical University of Munich, Germany. DETC2001/VIB-21328
ASME Biennial 2001 Modeling of Joints with Clearance in Flexible Multibody Systems Olivier A. Bauchau and Jesus Rodriguez, Georgia Institute of Technology DETC2001/VIB-21329
ASME Biennial 2001 Influence of Reference Conditions in the Analysis of the Impact of Flexible Bodies Jose L. Escalona, Juana Mayo, and Jaime Dominguez, University of Sevilla, Spain DETC2001/VIB-21330
ASME Biennial 2001 Dynamics of Rolling Wheel with Contact Rigidity and Slip Yoshiaki Terumichi, Sophia University; Yoshihiro Suda, University of Tokyo; and Kiyoshi Sogabe, Sophia University, Japan DETC2001/VIB-21331
ASME Biennial 2001 Contact Dynamics of Reconfigurable Space Systems With Numerical Verification Method Takashi Takahashi, and Saburo Matunaga, Tokyo Institute of Technology, Japan DETC2001/VIB-21332
ASME Biennial 2001 Autobalance Anisotropic Mounted Rotors Hakan Wettergren, Linkoping University, Sweden DETC2001/VIB-21378
ASME Biennial 2001 Seven Major Steps to Improve Today's High-Speed Balancing Hatto Schneider, A. Buschbeck, Karl-Josef Hoffmann, A. Bornheimer and J. Schmidt, SCHENCK RoTec GmbH, Germany DETC2001/VIB-21379
ASME Biennial 2001 Flexible Rotor Balancing Taking Bearing Non-Linearity into Account P. Y. P. Chen, N. S. Feng,and E. J. Hahn, The University of New South Wales, Australia DETC2001/VIB-21380
ASME Biennial 2001 Active Mass Auto-balancing System for Centrifuge Rotor Providing an Artificial Gravity in Space Koichi Ohtomi, O. Nishimura,and Y. Chida, Toshiba Corporate R & D Center, and Y. Nakamura, National Space Development Agency, Japan DETC2001/VIB-21381
ASME Biennial 2001 Dynamics of Manufacturing System with Two Commensurate Delays: Cylindrical Workpiece Turning Using Multiple-Cutter ToolHeads Alexander M. Gouskov, Sergey A. Veronov, Bauman Moscow St. Technical Univ., Russia, Herni Paris, Joseph Fourier Univ., France, and Stephen A. Batzer, University of Arkansas DETC2001/VIB-21431
ASME Biennial 2001 Geared Rotordynamic Systems on Hydrodynamic Bearings S. Theodossiades and S. Natsiavas, Aristotle University, Greeece DETC2001/VIB-21432
ASME Biennial 2001 On the Transversal Vibrations of a Conveyer Belt Using a String-like Equation G. Suweken and W. T. van Horssen, Delft Univ. of Technology, Netherlands DETC2001/VIB-21433
ASME Biennial 2001 Parametric Vibration of Viscoelastic Moving Belts Using Standard Linear Solid Model Zhichao Hou and Jean W. Zu, University of Toronto, Canada DETC2001/VIB-21434
ASME Biennial 2001 Modeling and Chatter Suppression with Ultra-Precision in Dynamic Turning Metal Cutting Process Jingchuan Pan and Chun-Yi Su, Concordia University, Canada DETC2001/VIB-21435
ASME Biennial 2001 Active Wave Cancellation of the Axially Moving String C. A. Tan and S. Ying, Wayne State University DETC2001/VIB-21479
ASME Biennial 2001 Acoustic Modeling of Conical Bores with Actuating Boundary Conditions K. M. Farinholt and D. J. Leo, Virginia Tech DETC2001/VIB-21480
ASME Biennial 2001 Active Control of Radiated Sound from a Vibrating Plate J-S Hong and J-E Oh, Hanyang University, Korea DETC2001/VIB-21481
ASME Biennial 2001 Adaptive Feedforward Active Noise Control in an Acoustic Duct E. Esmailzadeh, A.R. Ohadi, and A. Alasty, University of Victoria DETC2001/VIB-21482
ASME Biennial 2001 Actuator Placement for Active Vibration Control Systems with External Excitations S. Yuan and L. Xie, Nanyang Technological University, Singapore PANEL: A. Akay, Carnegie Mellon University, J. Enright, BFGoodrich Company, G. Mazet, Messier-Bugatti, Y. Naerheim, Rockwell Science Center, C. Trustee, Dunlop Aviation DETC2001/VIB-21483
ASME Biennial 2001 Analysis of Axial Vibration of Compound Bars by Several Different Methods Charles W. Bert, The University of Oklahoma DETC2001/VIB-21564
ASME Biennial 2001 Equations of Motion of an Aircraft Wing Modeled as a Composite Plate-beam Model Including the Rigid-body Motion Haider N. Arafat , Virginia Polytechnic Institute and State University DETC2001/VIB-21563
ASME Biennial 2001 Analytical Solution of Forced Vibration of a Column Subjected to Conservative and Nonconservative Forces Zhixiang Xu, Saga University, China DETC2001/VIB-21562
ASME Biennial 2001 The Asymptotic Stability of Weakly Perturbed Two Dimensional Hamiltonian Systems Ludwig Arnold and Peter Imkeller, Unive rsity of Bremen; Germany and N. Sri Namachchivaya, University of Illinois at Urbana-Champaign DETC2001/VIB-21593
ASME Biennial 2001 Stabilisation of Period-1 Orbits of the HŽnon Map: Parametric Variation and Additive Noise Huw G. Davies, University of New Brunswick, Canada DETC2001/VIB-21594
ASME Biennial 2001 Global Behavior of a Nonlinear Quasiperiodic Mathieu Equation Randolph S. Zounes, Richard H. Rand, Cornell University DETC2001/VIB-21595
ASME Biennial 2001 A Unified Framework for the Study of Periodic Solutions of Nonlinear Delay Differential Equations M. S. Fofana, Worcester Polytechnic Institute DETC2001/VIB-21617
ASME Biennial 2001 P-Bifurcation Aspects of a Modified Duffing Oscillator Near Equilibrium M. S. Fofana and Dariusz Szwarc, Worcester Polytechnic Institute DETC2001/VIB-21596
ASME Biennial 2001 Research into the Use of Fractal Geometry for Condition Monitoring of Machinery T. X. Liu, H. X . Hua and Z. N. Chen, Shanghai University, and J. M. Zhu, Shanghai University of Technology, Shanghai, China DETC2001/VIB-21644
ASME Biennial 2001 New Approach of Wavelet Fractal Analysis to Mechanical Fault Diagnosis Z. J. He and Y. Y. Zi, Xi'an Jiaotong University, Shanx i, China DETC2001/VIB-21645
ASME Biennial 2001 Can Wavelet Transforms Used for Data Compression Equally Suitable for the Use of Machine Fault Diagnosis P. Tse and Ling S. He, City University of Hong Kong, Kowloon, China DETC2001/VIB-21647
ASME Biennial 2001 Web and Virtual Instrument Based Machine Remote Sensing, Monitoring and Fault Diagnostic System P. Tse, City University of Hong Kong, Kowloon, China DETC2001/VIB-21648
ASME Biennial 2001 Identifying, Correcting, and Avoiding Errors in CAD Models Which Affect Interoperability Hong Gu, Thomas R. Chase, University of Minnesota; Douglas C. Cheney, DETC2001/CIE-21225
ASME Biennial 2001 Where Interoperability Ends Joris S. M. Vergeest, Imre Horvath, Delft University of Technology DETC2001/CIE-21231
ASME Biennial 2001 A Concept for the Support of an Efficient Search for Product Data Gritt Ahrens, Sven DŸsselmann,Technical University of Berlin DETC2001/CIE-21234
ASME Biennial 2001 Fuzzy Data Type Modeling with EXPRESS Z. M. Ma, W. J. Zhang, University of Saskatchewan; W. M. Ma, City University of Hong Kong DETC2001/CIE-21235
ASME Biennial 2001 Towards A Specification For A Product Model To Assist The Design Of Injection Molds Hector Morano, Vicente Borja, Marcelo Lopez, çlvaro Ayala, Universidad Nacional Aut-mata de Mexico DETC2001/CIE-21284
ASME Biennial 2001 A Graph Grammar Based Approach For Development Of An Internet-Based Product Family Information System Zahed Siddique, Zili Shao, University of Oklahoma DETC2001/CIE-21280
ASME Biennial 2001 A Survey of Methods and Approaches to Knowledge Management in the Product Development Environment Maria Benson, Janis Terpenny, University of Massachusetts at Amherst DETC2001/CIE-21288
ASME Biennial 2001 A Web-Based Distributed Product Realization Environment Angran Xiao, Hae-Jin Choi, Rahul Kulkarni, Janet K. Allen, David Rosen, Georgia Institute of Technology; Farrokh Mistree, National Institute of Standards and Technology DETC2001/CIE-21766
ASME Biennial 2001 Collaborative Modeling with Features Rafael Bidarra, Eelco van den Berg, Willem F.Bronsvoort, Delft University of Technology DETC2001/CIE-21286
ASME Biennial 2001 An Effective Geometric and Kinematical Analysis of Ruled Surface Feature Manufacturability for Rapid Prototyping P. J.de Jager, J. J. Broek, I. Horvath, A.Kooijman, A. de Smit, Delft University of Technology DETC2001/CIE-21299
ASME Biennial 2001 An Efficient Geometric Algorithm for Extracting Mechanical Elements: A Step Towards Developing an Automated Extraction Tool for MEMS Sashidhar Bellam, Satyandra K. Gupta, University of Maryland DETC2001/CIE-21302
ASME Biennial 2001 A Declarative Feature-Based Cross Sectional Design Tool for Surface Micromachined MEMS Feng Gao, Radha Sarma, University of Toledo DETC2001/CIE-21775
ASME Biennial 2001 Metamodel Assessment Strategies for System-Level Design M. Meckesheimer, R. Barton, T.W. Simpson, Penn State University, A.J. Booker, Boeing DETC2001/DAC-21028
ASME Biennial 2001 The Use of Metamodeling Techniques for Optimization Under Uncertainty R. Jin, X. Du, W. Chen, University of Illinois at Chicago DETC2001/DAC-21039
ASME Biennial 2001 Improvement on the Adaptive Response Surface Method for High-Dimensional Computation-Intensive Design Problems G. Wang, University of Manitoba DETC2001/DAC-21141
ASME Biennial 2001 Fixture Configuration Design for Sheet Metal Laser Welding with a Two-stage Response Surface Methodology B. Li, B.W. Shiu, K.J. Lau, Hong Kong Polytechnic University DETC2001/DAC-21096
ASME Biennial 2001 A Game-Theoretic Approach to Integrated Product Design W. Steinhour, K. Krishnamurthy, University of Missouri-Rolla DETC2001/DAC-21086
ASME Biennial 2001 On the Aggregation of Preferences in Engineering Design B. Allen, University of Minnesota DETC2001/DAC-21015
ASME Biennial 2001 Utility-Based Decision Support for Selection in Engineering Design M.G. Fernandez, C. Conner Seepersad, D.W. Rosen, J.K. Allen, F. Mistree, Georgia Institute of Technology DETC2001/DAC-21106
ASME Biennial 2001 Reading Required Characters in Market of Products by Using Data Envelopment Analysis M. Arakawa, H. Nakayama, Y.B. Yun, H. Ishikawa, Kagawa University DETC2001/DAC-21009
ASME Biennial 2001 Topology Optimization of Compliant Mechanisms with Strength Considerations A. Saxena, G.K. Ananthasuresh, University of Pennsylvania DETC2001/DAC-21016
ASME Biennial 2001 Towards the Design of Heterogeneous Compliant Mechanisms L. Yin, G.K. Ananthasuresh, University of Pennsylvania DETC2001/DAC-21018
ASME Biennial 2001 Understanding Large Deformation Behavior of Compliant Mechanisms Using Nonlinear Models J. Joo, S. Kota, N. Kikuchi, University of Michigan DETC2001/DAC-21084
ASME Biennial 2001 Design of Compliant Force and Displacement Amplification Micro-Mechanisms M. Parkinson, B. Jensen, K. Kurabayashi, University of Michigan DETC2001/DAC-21089
ASME Biennial 2001 Design Of An Evaluative Tool For A Multi-Station Injection Molding System Using An Evolutionary Algorithm L.H. Shu, University of Toronto DETC2001/DFM-21187
ASME Biennial 2001 Haptic And Aural Rendering Of A Virtual Milling Process Q. J. Ge, Chu-Fei Chang, State University of New York at Stony Brook; Amitabh Varshney, University of Maryland DETC2001/DFM-21170
ASME Biennial 2001 Automatic Setup Planning and Operation Sequencing Satifying Tolerance Requirement Gao Shuming, Yuguang Wu, Zichen Chen, Zhejiang University DETC2001/DFM-21174
ASME Biennial 2001 The Machine Designs Behind Reference Free Part Encapsulation Sanjay E. Sarma, Elmer Lee, Massachusetts Institute of Technology DETC2001/DFM-21188
ASME Biennial 2001 A Mixed Integer Programming Formulation For Generating Shared Press-Brake Setups S.K. Gupta, Deepak Rajagopal, University of Maryland DETC2001/DFM-21203
ASME Biennial 2001 Understanding Perceptual Gaps in Integrated Product Development Teams Jonathan Cagan, Craig Vogel, Laurie Weingart, Carnegie Mellon University DETC2001/DTM-21681
ASME Biennial 2001 An Approach to Decision-Based Design Henk Wassenaar, Wei Chen, University of Illinois at Chicago DETC2001/DTM-21683
ASME Biennial 2001 A Framework for Flexible Systems and Its Implementation in Multiattribute Decision Making Andrew Olewnik, Trevor Brauen, Scott Ferguson, Kemper Lewis, University of Buffalo DETC2001/DTM-21703
ASME Biennial 2001 Idetifying Shared Understanding in Design Using Document Analysis Andrew Hill, Shuan Song, Andy Dong, Alice Agogino, University of California at Berkeley DETC2001/DTM-21713
ASME Biennial 2001 A Unified Formulation of Multibody Kinematic Equations in Terms of Absolute Joint and Indirect Coordinates John J. McPhee, University of Waterloo, Canada DETC2001/VIB-21333
ASME Biennial 2001 Improved "Order-N" Performance Algorithm for the Simulation of Constrained Multi-Rigid-Body Dynamic Systems Kurt Anderson, Rensselaer Polytechnic Institute DETC2001/VIB-21334
ASME Biennial 2001 Efficient Direct Differentiation Sensitivity Analysis for General Multi-Rigid-Body Dynamic Systems Kurt Anderson, Rensselaer Polytechnic Institute DETC2001/VIB-21335
ASME Biennial 2001 Velocity Transformation of a Revolute-Spherical Massless Link for Dynamic Analysis of Multibody Systems Jeong-Hyun Sohn, Wan-Suk Yoo, O-Kwang Lim, and Keum-Shik Hong, Pusan National University, South Korea DETC2001/VIB-21336
ASME Biennial 2001 Motion and Vibration Analysis of a Roller Coaster Katsuhisa Fujita, and Tetsuya Kimura, Osaka Prefecture University, Japan; and Yoshinori Yamamoto, Sanoyas Hishino Meisho Co., Japan DETC2001/VIB-21337
ASME Biennial 2001 Twice-Running Speed Response Due to Elliptical Bearing Clearances Dara W. Childs, Texas A & M University DETC2001/VIB-21382
ASME Biennial 2001 Theoretical Study on Instability Boundary of Rotor-Hydrodynamic Bearing Systems: Part I- Jeffcott Rotor with External Damping Zenglin Guo and R. Gordon Kirk, Virginia Polytechnic Institute and State University DETC2001/VIB-21384
ASME Biennial 2001 Theoretical Study on Instability Boundary of Rotor-Hydrodynamic Bearing Systems: Part II- Rotor with External Flexible Damped Support Zenglin Guo and R. Gordon Kirk, Virginia Polytechnic Institute and State University DETC2001/VIB-21385
ASME Biennial 2001 Rotordynamics Involving Axial Rubbing Against a Disk Dara W. Childs and Nameer A. Siddiqui, Texas A & M University DETC2001/VIB-21383
ASME Biennial 2001 A New Finding on the Dynamic Stiffness Matrices of Asymmetric and Axisymmetric Shafts Francesco A. Raffa and Furio Vatta, Politecnico di Torino, Italy DETC2001/VIB-21386
ASME Biennial 2001 Dynamics Stability of Rotating Abrasive Tool for Deep Hole Honing Alexander M. Gouskov, Sergey A. Voronov, Bauman Moscow St. Technical Univ., Russia ; Stephen A. Batzer, University of Arkansas DETC2001/VIB-21436
ASME Biennial 2001 Combined Parametrical and Transversal Excitation of a Stretched String in an Elastic Medium Caswita, Adriaan van der Burgh, Delft Univ. of Technology, Netherlands DETC2001/VIB-21437
ASME Biennial 2001 Dynamics of Towed Cables During Transient Motions Leslie Ng, Richard Rand, William Keith, Cornell University DETC2001/VIB-21438
ASME Biennial 2001 Mesh Stiffness Variation Instabilities inTwo-Stage Gear Systems Jian Lin, Robert G. Parker, The Ohio State University DETC2001/VIB-21439
ASME Biennial 2001 Two Mode Resonator and Contact Model for Standing Wave Piezomotor B. Andersen, M. Blanke,J. Helbo, Aalborg University, Sweden DETC2001/VIB21484
ASME Biennial 2001 A Refined Model For A Piezoelectric Transformer W. Seemann, R. Gausmann, University Of Kaiserslautern, Germany DETC2001/VIB21485
ASME Biennial 2001 Computer Algebra Program For The Derivation Of The Equations Of Piezoelectric Structures K. Schlacher, S. Kugi, University of Linz, Austria DETC2001/VIB21486
ASME Biennial 2001 Distributed Friction and Microslip in Mechanical Joints with Varying Degrees of Freedom D. Quinn, The University of Akron DETC2001/VIB-21514
ASME Biennial 2001 Identification of a Micro-slip Friction Damping Function Using Directed Genetic Programming J. Gregory, T. Paez, R. Coleman, and D. Gregory, Sandia National Laboratories DETC2001/VIB-21515
ASME Biennial 2001 An Experimental Method to Identify the Effects of Joints on Structures Using Laser Vibrometry X. Ma, A. Vakakis, and L. Bergman, The University of Illinois at Urbana-Champaign DETC2001/VIB-21516
ASME Biennial 2001 Bending Effects in the Energy Dissipation of Bolted Interfaces D. Segelman and M. Heinstein, Sandia National Laboratories DETC2001/VIB-21517
ASME Biennial 2001 Nonlinearly Coupled In-Plane and Transverse Vibrations of a Spinning Disk Jean W. Zu, University of Toronto, Canada DETC2001/VIB-21565
ASME Biennial 2001 Rocking Vibration of Rotating Disk and Spindle Systems with Asymmetric Bearings Steve Shen, The University of Washington DETC2001/VIB-21566
ASME Biennial 2001 Measurement and Analysis of Modulated Doublet Mode Response in Mock Bladed Disks Jonathan Wickert, Carnegie Mellon University DETC2001/VIB-21567
ASME Biennial 2001 Out-of-plane Vibrations of a Stepped Euler-Bernoulli Beam Clamped Radially to a Rotating Hub S. Naguleswaran, University of Canterbury, New Zealand DETC2001/VIB-21568
ASME Biennial 2001 Efficient Dynamic Simulation of Flexible Link Manipulators With PID Control Ronald G. K. M. Aarts and J. B. Jonker, University of Twente, Netherlands DETC2001/VIB-21615
ASME Biennial 2001 Control of Rotary Cranes Using Fuzzy Logic Amjed A. Al -mousa, Ali H. Nayfeh, and Pushkin Kachroo, Virginia Polytechnic Institute and State University DETC2001/VIB-21598
ASME Biennial 2001 Delayed Position-Feedback Controller for the Reduction of Payload Pendulations of Rotary Cranes Ali H. Nayfeh and Ziyad N. Masoud, Virginia Polytechnic Institute and State University DETC2001/VIB-21601
ASME Biennial 2001 Dynamics of Semi-Actively Controlled Vehicles Involving Wheel Hop G. Verros and S. Natsiavas, Aristotle University, Greece DETC2001/VIB-21604
ASME Biennial 2001 Application of a Sliding Mode Observer for Dynamic Positioning of Ships Myung-Hyun Kim and Daniel J. Inman,Virginia Polytechnic Institute and State University DETC2001/VIB-21602
ASME Biennial 2001 A Study on the Charateristics of Rubber Flexible Pipes Y. L. Zhao and L. He, Naval University of Engineering, Hubei, China DETC2001/VIB-21649
ASME Biennial 2001 Nonlinear Parametric Vibrations of an Elastic Structure with a Cylindrical Liquid Container (In the Case of an Anti-Symmetric Sloshing Mode) T. Ikeda and S. Murakami, Shimane Un iversity, Matsue, Japan DETC2001/VIB-21650
ASME Biennial 2001 Coupling Vibration Analysis of Blood Vessels J. L. Miao and H. X. Liu, Beijing Metronics Medical Institute, Beijing, China DETC2001/VIB-21651
ASME Biennial 2001 Driving Characteristics of Traveling Wave Ultrasonic Motor (Effect of Rotor Vibration) T. Nakashima, M. Yoshizawa and H. Kuno, Keio University, M. Tsukui and T. Akuto, Mitsuba Co., Ltd, Kiryu, and K. Takatsuka, Fukui University of Technology, Fukui, Japan DETC2001/VIB-21653
ASME Biennial 2001 A Conceptual Design Information Structure and its Formation Process Based on Protocol Analysis in CAD Models Which Affect Interoperability Kei Kurakawa, Nara Institute of Science and Technology DETC2001/CIE-21226
ASME Biennial 2001 An Architecture for Virtual Prototyping Of Complex Systems Bipin Chadha, John Welsh, Lockheed Martin ATL DETC2001/CIE-21239
ASME Biennial 2001 Comparative Study Of Representation Structures for Modeling Function and Behavior of Mechanical Devices Joshua D. Summers, Noe Vargas-Hernandez, Zuozhi Zhao, Jami J.Shah, Zoe Lacroix, Arizona State University DETC2001/CIE-21243
ASME Biennial 2001 Distributed Modeling in Engineering: Toward a Tool-Supported Integration of Notations Using Meta Object Facilities Dirk Jesko, University of Magdeburg; George Paul, University of Magdeburg DETC2001/CIE-21245
ASME Biennial 2001 A Design Procedure Applicable to Different Classes of Assemblies Daniel E. Whitney, Gaurav Shukla, Massachusetts Institute of Technology DETC2001/CIE-21304
ASME Biennial 2001 Specification of Assembly Requirements in Terms of Elementary Manipulation Tasks Matthew D. Devenish, Graham G. Rogers, Curtin University of Technology DETC2001/CIE-21306
ASME Biennial 2001 The Geometric Principle of Automatic Modular Fixture Planning Yuguang Wu, Shuming Gao, Zichen Chen, Zhejiang University DETC2001/CIE-21666
ASME Biennial 2001 A Region Based Approach to Automated Design of Multi-Piece Molds with Application to Rapid Tooling Yong Chen, David Rosen, Georgia Institute of Technology DETC2001/CIE-21294
ASME Biennial 2001 Multidisciplinary Robust Design Optimization of an Internal Combustion Engine C.D. McAllister, T. Simpson, Penn State University DETC2001/DAC-21124
ASME Biennial 2001 Analytical Target Cascading in Automotive Vehicle Design H. M. Kim, D.G. Rideout, P.Y. Papalambros, J.L. Stein, University of Michigan DETC2001/DAC-21079
ASME Biennial 2001 Optimal Concurrent Design Based Upon Distributed Database and Knowledge Base Modeling F. Zhang, D. Xue, University of Calgary DETC2001/DAC-21148
ASME Biennial 2001 Implicit Uncertainty Propagation for Robust Collaborative Optimization X. Gu, J. Renaud, University of Notre Dame DETC2001/DAC-21118
ASME Biennial 2001 The Use of the Voxmap Pointshell Method of Collision Detection in Virtual Assembly Methods Planning T. C. Johnson, J.M. Vance, Iowa State University DETC2001/DAC-21137
ASME Biennial 2001 Effectiveness of Haptic Sensation for the Evaluation of Virtual Prototypes S. Volkov, J.M. Vance, Iowa State University DETC2001/DAC-21135
ASME Biennial 2001 Spatial Mechanism Design in Virtual Reality with Networking J.N. Kihonge, J.M. Vance, Iowa State University, P.M. Larochelle, Florida Institute of Technology DETC2001/DAC-21136
ASME Biennial 2001 Towards A Non-Nominal Virtual Geometry Verification Process By Combining VR Ans CAT Technologies C. Wickman, Chalmers University of Technolgy DETC2001/DAC-21143
ASME Biennial 2001 Posture Prediction versus Inverse Kinematics K. Abdel-Malek, W. Yu, The Univesrity of Iowa, E. Tanbour, Hon Industries, M. Jaber, Ryerson Polytechnic University DETC2001/DAC-21013
ASME Biennial 2001 Analysis Of Finite Self Motion And Finite Dwell In Closed Loop Mechanisms And Parallel Manipulators S. Bandyopadhyay, A. Ghosal, University of Pennsylvania DETC2001/DAC-21024
ASME Biennial 2001 Workspace-Based Design Of Parallel Manipulators Of Star Topology With A Genetic Algorithm L. Baron, Ecole Polytechnique de Montreal DETC2001/DAC-21026
ASME Biennial 2001 Structure Synthesis Of The 3-DOF (3 Translation) Parallel Robot Mechanism Based On Single-Opened-Chain Units T-L. Yang, Southeast University DETC2001/DAC-21152
ASME Biennial 2001 Assembly Redesign For Rapid Prototyping S.T. Tan, University of Toronto DETC2001/DFM-21167
ASME Biennial 2001 Design For Control And Optimization Of Flow Front Progression In Liquid Molding Processes Sanjay Parthasarathy, Soumitri Kolavennu, Wendy Foslien, Anoop Mathur, Honeywell Laboratories DETC2001/DFM-21175
ASME Biennial 2001 Assembly Quality Methodology: An Application Of The Defect Prediction To Audio Equipment Assembled At Various Manufacturing Sites Kosuke Ishii, Hirokazu Shibata, Sony Electronics Incorporated; Brent Cheldelin, Stanford University DETC2001/DFM-21194
ASME Biennial 2001 Environmentally Benign Manufacturing: Trends In Europe, Japan, And The USA Dave Allen, University of Texas at Austin; Diana Bauer, Environmental Protection Agency; Bert Bras, Georgia Institute of Technology; Tim Gotowski, Massachusetts Institute of Technology; Cindy Murphy, University of Texas at Austin; Tom Piwonka, University DETC2001/DFM-21204
ASME Biennial 2001 Evolving a Functional Basis for Engineering Design Julie Hirtz, Robert Stone, Daniel McAdams, University of Missouri at Rolla; Simon Szykman, National Institute of Standards and Technology; Kristin Wood, University of Texas at Austin DETD2001/DTM-21688
ASME Biennial 2001 Affordance: The Fundmental Concept in Engineering Design Jonathan Maier, Georges Fadel, Clemson University DETC2001/DTM-21700
ASME Biennial 2001 Functional Modeling Using Experimental Studies Mark Kurfman, Robert Stone, University of Missouri at Rolla; Jagan Rajan, Kristin Wood, University of Texas at Austin DETC2001/DTM-21709
ASME Biennial 2001 Towards Logical Framework for Sequential Design Martin Dzbor, Zdenek Zdrahal Panelists: Philip Pfund, Fermi National Accelerator Lab, Jim Baxter, University of Leeds, Imre Horvath, Delft University of Technology,GQ Huang, University of Hong Kong,David Challice, Bournemouth University,Andrew Murray, Uni DETC2001/DTM-21720
ASME Biennial 2001 Development and Validation of a S-N based Two Phase Bending Fatigue Life Prediction Model Avinash Singh, GM Power Train DETC01/RSAFP-21741
ASME Biennial 2001 A Procedure for Fast Evaluation of High-Cycle Fatigue under Multiaxial Random Loading Bin Li, Manuel de Freitas, Instituto Superior Techico DETC01/RSAFP-21742
ASME Biennial 2001 Study Film-Edge Induced Stresses In Substrates By Infrared Photoelasticity Haijing Peng, S. P. Wong, Chinese University of Hong Kong; Shounan Zhao, South China University of Technology DETC01/RSAFP-21743
ASME Biennial 2001 Development and Validation of a S-N based Two Phase Bending Fatigue Life Prediction Model Avinash Singh, GM Power Train DETC01/RSAFP-21741
ASME Biennial 2001 A Procedure for Fast Evaluation of High-Cycle Fatigue under Multiaxial Random Loading Bin Li, Manuel de Freitas, Instituto Superior Techico DETC01/RSAFP-21742
ASME Biennial 2001 Study Film-Edge Induced Stresses In Substrates By Infrared Photoelasticity Haijing Peng, S. P. Wong, Chinese University of Hong Kong; Shounan Zhao, South China University of Technology DETC01/RSAFP-21743
ASME Biennial 2001 Lumped-Parameters Brick Element for Modeling Shell Flexible Multibody Systems Tamer Wasfy, Advanced Science and Automation Corp DETC2001/VIB-21338
ASME Biennial 2001 On the Modeling of Shells in Multibody Dynamics Olivier Bauchau, Georgia Institute of technology and Carlo L. Bottasso, Milan Polytechnic, Italy DETC2001/VIB-21339
ASME Biennial 2001 Study on Derivation and Application of Mean Axis for Deformable Beam by Means of the Absolute Nodal Coordinate Multibody Dynamics Formulation Yoshitaka Takahashi, and Nobuyuki Shimizu, Iwaki Meisei University, Japan DETC2001/VIB-21340
ASME Biennial 2001 A New Plate Element Based on the Absolute Nodal Coordinate Formulation Aki M. Mikkola, Lappeenranta University of Technology, Finland, and Ahmed A. Shabana, University of Illinois at Chicago DETC2001/VIB-21341
ASME Biennial 2001 Dynamic Finite Element Modeling of Belt-Drives Michael J. Leamy, United States Military Academy, and Tamer M. Wasfy, Advanced Science and Automation Corporation DETC2001/VIB-21342
ASME Biennial 2001 Modal Control of Flywheel Motion in Magnetic Bearings Z. Gosiewski, Aviation Institute and Jerzy T. Sawicki, Cleveland State University DETC2001/VIB-21388
ASME Biennial 2001 Analysis of Electromagnetic Excitation Sources of Noise and Vibration in Interior Permanent Magnet Motor Hong-Seok Ko and Kwang-Joon Kim, Korea Advanced Institute of Science and Technology, South Korea DETC2001/VIB-21387
ASME Biennial 2001 Active Control of Rotor Vibrations by Means of Piezoelectric Actuators Costantino Carmignani, Paola Forte and Emiliano Rustighi, University of Pisa DIMNP, Italy DETC2001/VIB-21390
ASME Biennial 2001 Influence of a Synchronized Self-shifting Clutch in a Single-shaft Plant on the Torsional Behaviour of the Shaft Train in Case of Electrical Faults Meinolf Klocke, University of Dortmund, and Stefan Verstege, Siemens AG, Germany DETC2001/VIB-21389
ASME Biennial 2001 Explanation Of Appearance And Characteristics Of Intermittency Chaos Of The Impact Oscillator Frantisek Peterka,Institute Of Thermomechanics, Academy Of Sciences Of The Czech Republic, Czech Republic DETC2001/Vib-21440
ASME Biennial 2001 Structure-Borne Vibro-Impact Resonances And Periodic Green Functions Vladimir Babitsky,Department Of Mechanical Engineering, Loughborough University, United Kingdom DETC2001/Vib-21441
ASME Biennial 2001 Grazing Bifurcations Of Initially Quasi-Periodic System Attractors Harry Dankowicz,Virginia Polytechnic Institute And State University DETC2001/Vib-21442
ASME Biennial 2001 Steady State Vibrations Of A Piecewise Linear System Gholamreza Nakhaie Jazar, Postdoctoral Fellow Mechanical Engineering, Department Faculty Of Engineering Waterloo, Canada DETC2001/Vib-21443
ASME Biennial 2001 Nonlinear Transient Localization And Bet Phenomena Due To Backlash In A Coupled Flexible System Alexander Vakakis University Of Illinois And National Technical University Of Athens, Greece DETC2001/Vib-21444
ASME Biennial 2001 Optimization Of A Resonant Bimorph Actuator E.M. Mockensturm, J. Frank, G.H. Koopomann, G.A. Lesieutre, Pennsylvania State University DETC2001/VIB21487
ASME Biennial 2001 Nonlinear Behavior of Piezo-Beam-Systems Subjected to Weak Electric Field U.v. Wagner, P. Hagedorn, M.N. Nguyen, University of Darmstadt, Germany DETC2001/VIB21488
ASME Biennial 2001 Nonlinear Dynamics of a Cantilever Beam Actuated by Piezoelectric Layers K. Wolf, O. Gottlieb, Israel Institute of Technology DETC2001/VIB21489
ASME Biennial 2001 On Equivalence of the Moving Mass and Moving Oscillator Problems A. V. Pesterev, Russian Academy of Sciences; L. A. Bergman, University of Illinois at Urbana-Champaign; C. A. Tan, Wayne State University; T.-C. Tsao, University of California at Los Angeles; B. Yang, University of Southern California DETC2001/VIB-21518
ASME Biennial 2001 Vibration Control of a Beam Using a Sliding Support P. H. Nguyen and J. H. Ginsberg, Georgia Institute of Technology DETC2001/VIB-21519
ASME Biennial 2001 Effects of Boundary Flexibility in the Moving Oscillator Problem Y. H. Chen, Xian Jiaotong University; C. A. Tan, Wayne State University; L. A. Bergman, University of Illinois at Urbana-Champaign DETC2001/VIB-21521
ASME Biennial 2001 Load Identification Through Wavelet Parametrization P. Nordberg, Chalmers University of Technology, Sweden DETC2001/VIB-21523
ASME Biennial 2001 Moving Force Identification for Multi-Span Bridges by Using Acceleration Measurements F. T. K. Au, R. J. Liang and Y. K. Cheung, The University of Hong Kong, Hong Kong DETC2001/VIB-21525
ASME Biennial 2001 An Investigation of Torsional Wave Control in a Multiple Stepped Turbogenerator Shaft System Zhiyong Hao, Tianjin University DETC2001/VIB-21569
ASME Biennial 2001 Eigenstructure Calculation for Mixed Vibratory Systems Composed of a Continuous Beam and Concentrated Actuators Michael J. Panza, Gannon University DETC2001/VIB-21570
ASME Biennial 2001 Determination of External Forces -- Application to the Calibration of an Electromagnetic Actuator Izhak Bucher, Technion -- Israel Institute of Technology, Israel DETC2001/VIB-21571
ASME Biennial 2001 Passive Vibration Control of the Head Actuator Assembly in Hard Disk Drive N.Q. Guo, Nanyang Technological University, Singapore DETC2001/VIB-21572
ASME Biennial 2001 Visco-Elastic Systems under Narrow-Band Excitation W. Xu and T. Fang, Northwestern Polytechnical University, Xi'an, H. W. Rong, Foshan University, Guangdong, China DETC2001/VIB-21654
ASME Biennial 2001 The Analysis of Nonlinear Random Vibration of Vehicles J. L. Miao and H. X. Liu, Beijing Metronics Medical Institute, Beijing, China DETC2001/VIB-21655
ASME Biennial 2001 The Nonlinear Vibration of a Vehicle and Passenger System A. Luo and Yuancheng He, Southern Illinois University Edwardsville, IL DETC2001/VIB-21657
ASME Biennial 2001 Using the Abstract Prototyping Technique in the Development of Design Support System E. Z. Opiyo, Imre Horvath, Joris S. M. Vergeest , Delft University of Technology DETC2001/CIE-21233
ASME Biennial 2001 Pattern-Based Approach in Conflict Cause Identification in Distributed Design Environment Tianhong Jiang, Motorola Incorporated; Gale E. Nevill, Jr., University of Florida DETC2001/CIE-21237
ASME Biennial 2001 Estimating Reduction in Development Time for Implementing a Product Platform Approach Zahed Siddique, University of Oklahoma DETC2001/CIE-21238
ASME Biennial 2001 Strategic Product Planning: The Development of Products and Markets of Tomorrow as an Entrepreneurial Challenge JŸrgen Gausemeier, University of Paderborn; Volker Binger, University of Paderborn DETC2001/CIE-21244
ASME Biennial 2001 Exploration of A Multi-User Collaborative Assembly Environment on the Internet: A Case Study Li Chen, Zhijie Song, Billy Liavas, University of Toronto DETC2001/CIE-21291
ASME Biennial 2001 Representing the Charters of Freedom Encasements in a Design Repository: A Case Study Robert Allen, NIST DETC2001/CIE-21292
ASME Biennial 2001 Affordable Space Systems Manufacturing: Intelligent Synthesis Technology, Process Planning, and Production Scheduling Jeffrey W. Herrmann, Mark Fleischer, Edward Lin, Vidit Mathur, University of Maryland; DETC2001/CIE-21281
ASME Biennial 2001 Web-Based Distributed System And Database Modeling For Concurrent Design D. Xue, Y. Xu, University of Calgary DETC2001/CIE-21287
ASME Biennial 2001 Application of Vague Geometric Representation for Shape Instance Generation of the Human Body Niels C. C. M.Moes, Zoltan Rusak, Imre Horvath, Delft University of Technology DETC2001/CIE-21298
ASME Biennial 2001 Physics-Based B-Spline Heterogeneous Object Modeling Xiaoping Qian, Debasish Dutta, University of Michigan DETC2001/CIE-21664
ASME Biennial 2001 Generating Offsets that are Homologous to Their Skeletons David Thompson, Richard Crawford, University of Texas at Austin DETC2001/CIE-21765
ASME Biennial 2001 A Skeletal Topological Modeler Based On Bounding Spheres David Thompson, Richard Crawford, University of Texas at Austin DETC2001/CIE-21307
ASME Biennial 2001 Multi-User Modeling of NURBS-Based Objects Cheryl V. Foster, Yuri Shapirstein, Christopher D. Cera, William C. Regli, Drexel University DETC2001/CIE-21256
ASME Biennial 2001 Using a Neural Network to Determine Fitness in Genetic Design S. Farritor, J. Zhang, University of Nebraska-Lincoln DETC2001/DAC-21052
ASME Biennial 2001 Global System Optimization Using Hierarchical Genetic Algorithms Based on Decision-Making Components M. Yoshimura, K. Izui, Kyoto University DETC2001/DAC-21075
ASME Biennial 2001 On the Heurstics of Discrete Optimization M.H. Gadallah, Cairo University DETC2001/DAC-21059
ASME Biennial 2001 Effectiveness of Neural Network and Genetic Algorithm in Hull Form Design M.R.H. Khondoker, C.M. Rahman, M.M. Islam, Bangladesh University of Engineering DETC2001/DAC-21078
ASME Biennial 2001 Expansion Approach for Layout Design of Complex Planar Gear Transmission System Y. Lu, J. Cha, Northern Jiaotong University DETC2001/DAC-21100
ASME Biennial 2001 Automatic Adaptive Quadrilateral Mesh Generation using Medial Axis Transform W. R. Quadros, B. Gurumoorthy, Indian Institute of Science, K. Ramaswami, F.B. Prinz, Stanford University DETC2001/DAC-21066
ASME Biennial 2001 Solid Model Reconstruction of Wireframe Cad Models K. Inoue, IBM Japan, Ltd, K. Shimada, K. Chilaka, Carnegie Mellon University DETC2001/DAC-21074
ASME Biennial 2001 Quad-Layer: Layered Quadrilateral Meshing of Narrow Two-Dimensional Domain by Bubble Packing and Chordal Axis Transformation S. Yamakawa, K. Shimada Carnegie Mellon University DETC2001/DAC-21149
ASME Biennial 2001 Discrete Curvature Approximations for the Segmentation of Polyhedral Surfaces D. Lessage, J.C. Leon, Domaine Universitaire, P. Veron, l'Ecole Nationale Superieure des Arts et Meiters DETC2001/DAC-21092
ASME Biennial 2001 Elastick: A Vision Based Interface for Designing Spatial Curves and Surfaces H. Suzuki, S. Fukushige, University of Tokyo DETC2001/DAC-21131
ASME Biennial 2001 Position Analysis Of A New Family Of 3-DOF Translational Parallel Manipulators M. Carricato, V. Parenti-Castelli, University Of Bologna DETC2001/DAC-21036
ASME Biennial 2001 Optimal Integration Of Smart Actuators In Parallel And Cooperating Robots To Enhance Operating Speed And Accuracy L. Yuan, J. Rastegar, State University of New York at Stony Brook DETC2001/DAC-21115
ASME Biennial 2001 Planar Cable Direct-Driven Robots, Part II: Dynamics and Control B. Williams, Ohio University, P. Gallina, University of Padova DETC2001/DAC-21146
ASME Biennial 2001 Position Analysis For A Class Of Novel 3-DOF Translational Parallel Robot Mechanisms T-L. Yang, Southeast University DETC2001/DAC-21151
ASME Biennial 2001 Structural synthesis of a class of five-dof parallel robot mechanisms based on single-opened-chain units F-H. Yao, Southeast University DETC2001/DAC-21153
ASME Biennial 2001 Using Yielded Cost as a Metric for Modeling Manufacturing Processes Peter Sandborn, Daniel V. Becker, University of Maryland DETC2001/DFM-21166
ASME Biennial 2001 Incorporating Manufacturing Cycle Time Cost In New Product Development Jeffrey W. Herrmann, Mandar M. Chincholkar, University of Maryland DETC2001/DFM-21169
ASME Biennial 2001 Feature-based, Design-concurrent Cost Calculation Using Case-based Reasoning Alexander Layer, Siegmar Haasis, Daimler Chrysler AG; Fred van Houten, University of Twente DETC2001/DFM-21176
ASME Biennial 2001 Cost-Specification Analysis: Design Concept Selection Based On Target Cost And Specifications Kosuke Ishii, Shun Takai, Stanford University DETC2001/DFM-21193
ASME Biennial 2001 Integrating Market Research with the Product Development Process: A step towards Design for Profit S.K. Gupta, Anoop K. Samuel, University of Maryland DETC2001/DFM-21202
ASME Biennial 2001 Capstone Design and Manufacturing of a Hand Made Small Electric Vehicle Haruo Sakamoto, Takashi Uchino, Toru Kaino, Tatsuro Sawada, Masaaki Yokoyama, Kochi University of Technology DETC2001/IED-21220
ASME Biennial 2001 Application of Double Impact Oscillator in Forming Frantisek Peterka, Academy of Science of the Czech Republic DETC2001/IED-21221
ASME Biennial 2001 Tolerance Optimization: A Decomposition Scheme, Variance Reduction and Fractional Approximation Mohamed Gadallah, Institute of Statistical Studies, Cai ro DETC2001/IED-21222
ASME Biennial 2001 Modeling for Optimization(MO_OP): Tools for Manufacturing and Design Engineering MohamedGadallah, Institute of Statistical Studies, Cairo; Hazim El-Mounayri, Purdue School of Engineering DETC2001/IED-21223
ASME Biennial 2001 Longitudinal Design Teams: Students Teaching Students Janet Rice, Robert H. Allen, Artin A. Shoukas, Johns Hopkins University DETC2001/IED-21208
ASME Biennial 2001 Power Demand of Actively Controlled Multibody Systems Werner O. Schiehlen, and Nils Guse, University of Stuttgart, Germany. DETC2001/VIB-21343
ASME Biennial 2001 Modeling Controlled Articulated Flexible Systems Using Assumed Modes Part I: Theory Theodore G. Mordfin, CSC Advanced Marine, Sivakumar S.K. Tadikonda and Massimo Ruzzene, The Catholic University of America DETC2001/VIB-21344
ASME Biennial 2001 Modeling Controlled Articulated Flexible Systems Using Assumed Modes Part II: Numerical Investigation Theodore G. Mordfin, CSC Advanced Marine, Sivakumar S.K. Tadikonda, and Massimo Ruzzene, The Catholic University of America DETC2001/VIB-21345
ASME Biennial 2001 Realization of Salto Backward Using a Horizontal Bar Exercise Robot Yoshihiro Takita, and Shigenobu Arai, National Defense Academy, Japan DETC2001/VIB-21346
ASME Biennial 2001 Inverse Dynamics of Musculo-Skeletal Systems Using an Efficient Min/Max Muscle Recruitment Model M. Damsgaard, J. Rasmussen, S.T. Christensen, Aalborg University, Denmark DETC2001/VIB-21347
ASME Biennial 2001 CFD Rotordynamic Analysis of Gas Labyrinth Seals J Jeffrey Moore, Dresser-Rand Co DETC2001/VIB-21394
ASME Biennial 2001 Modal Estimation of Gyroscopic Effect in Rotordynamic Systems Jerzy T. Sawicki, Cleveland State University DETC2001/VIB-21393
ASME Biennial 2001 Experimental Investigation of a Platform Damper with Curved Contact Areas Martin Jareland, Linkoping University, Sweden DETC2001/VIB-21391
ASME Biennial 2001 Forced Response of Disks Due to Distributed Pressure Fields A. H. Mohamad, J. Ravoux and Georges Jacquet-Richardet, Laboratoire de Mecanique des Structures, France DETC2001/VIB-21392
ASME Biennial 2001 Modeling and Stability Analysis of Turboprop Engine Instalations Rabih Alkhatib and Farid Golnaraghi, University of Waterloo, Canada DETC2001/VIB-21395
ASME Biennial 2001 The Dynamics of a Flexible Levitated Droplet Dan B. Marghitu, Auburn University DETC2001/VIB-21445
ASME Biennial 2001 SEMI-DISCRETIZATION OF DELAYED DYNAMICAL SYSTEMS Gabor Stepan, Budapest University of Technology and Economics, Department of Applied Mechanics, Hungary DETC2001/VIB-21446
ASME Biennial 2001 Topological Solitons in Nondegenerare One-component Chains I. Analytical study Leonid Manevitch, Head of Theoretical Division, Institute for Chemical Physics, Moscow, Russia DETC2001/VIB-21447
ASME Biennial 2001 Topological Solitons in Nondegenerare One-component Chains II. Numerical study Leonid Manevitch, Head of Theoretical Division, Institute for Chemical Physics, Moscow, Russia DETC2001/VIB-21448
ASME Biennial 2001 Symbolic Stability Boundaries and Root Locus Plots in Time-Periodic Systems Eric Butcher Dept. of Mech. Engr. Univ. Alaska Fairbanks DETC2001/VIB-21449
ASME Biennial 2001 High Performance Self-moving Cell Linear Motor Using Piezo Stack Actuator J. Kim, J. Lee, Inha University, South Korea DETC2001/VIB21490
ASME Biennial 2001 High Dynamic Range Colocated Sensoriactuator for Control of High-Speed Opotical Systems B.L. Bower, G.J. Knowles, QorTek, Inc. Williamsport DETC2001/VIB21491
ASME Biennial 2001 Shape Control of Timoshenko Beams by Shear-Based Piezoelectric Actuation M. Krommer, H. Irschik, Johannes Kepler University of Linz, Austria DETC2001/VIB21492
ASME Biennial 2001 High durability of functionally graded piezoelectric bending actuators J. Qiu, Tohoku University, Japan DETC2001/VIB21493
ASME Biennial 2001 Electromechanics and Distributed Modal Signal Analysis of Piezoelectric-Elastic Spherical Shells H.S. Tzou, P. Smithmaitrie, University of Kentucky DETC2001/VIB21494
ASME Biennial 2001 Vibration Control of Rope-Sway of Elevator for High-Rise Building M. Otuski, R. Nakada, and K. Yoshida, Keio University; K. Nagata and S. Fujimoto, Toshiba Corporation; T. Munakata, Toshiba Elevator and Building Systems Corporation, Japan DETC2001/VIB-21520
ASME Biennial 2001 Design of a Scaled Model for a High Rise, High Speed Elevator W. D. Zhu, University of Maryland at Baltimore County; L. J. Teppo, SPARTA, Inc. DETC2001/VIB-21731
ASME Biennial 2001 Parametric Studies on Moving Axle Load Identification L. Yu and T. H. T. Chan, The Hong Kong Polytechnic University, Hong Kong DETC2001/VIB-21524
ASME Biennial 2001 A Comparative Study on Dynamic Wheel Loads of Multi-Axle Vehicle and Bridge Responses C. W. Kim, Pohang College; M. Kawatani, Kobe University, Japan DETC2001/VIB-21526
ASME Biennial 2001 Input-Shaped Control of Gantry Cranes: Simulation and Curriculum Development C. Forest, D. Frakes, and W. Singhose, Georgia Institute of Technology DETC2001/VIB-21522
ASME Biennial 2001 Bifurcations and Chaos in the Response of a Rigid Rotor Supported by Eccentric Squeeze-Film Dampers J.I. Inayat-Hussain, H. Kanki, N.W. Mureithi, Dept. of Mechanical Engineering, Kobe University, Japan DETC2001/VIB-21573
ASME Biennial 2001 An Experimental Study of Torsional Vibration Absorbers A.G. Haddow, S.W. Shaw, Dept. of Mechanical Engineering, Michigan State University, East Lansing, MI DETC2001/VIB-21574
ASME Biennial 2001 Nonlinear Dynamics of a Flexible Spinning Disc Subjected to Combined External and Parametric Excitation A. Jana and A. Raman, Dept. of Mechanical Engineering, Purdue University, West Lafayette, IN DETC2001/VIB-21575
ASME Biennial 2001 Internal Resonance of the Jeffcott Rotor with Nonlinear Spring Characteristics Y. Ishida, T. Inoue, Dept. of Electronic -Mechanical Engineering, Nagoya University, Japan DETC2001/VIB-21576
ASME Biennial 2001 Control of an Elasto-Plastic Pendulum Johannes Gerstmayr, Hans Irschik, Johannes Kepler University of Linz, Austria DETC2001/VIB-21600
ASME Biennial 2001 A Simple Adaptive Feedback Controller for Tower Cranes Hanafy M. Omar and A. H. Nayfeh, Virginia Polytechnic Institute and State University DETC2001/VIB-21606
ASME Biennial 2001 Optimal Control of Homoclinic Bifurcation in a Periodically Driven Helmholtz Oscillator Stefano Lenci and Giuseppe Rega, Universita di Roma La Sapienza, Rome, Italy DETC2001/VIB-21599
ASME Biennial 2001 The Effect of Nonlinear Stiffness on the Maximum Response of the Shock-Isolating System under Shock Action X. T. Weng, S. J. Zhu and L. He, Navy University, Hubei, China DETC2001/VIB-21658
ASME Biennial 2001 Control of a Buckled Beam Subjected to a Compressive Force H. Yabuno, K. Ando and N. Aoshima, University of Tsukuba, Tsukuba, Japan DETC2001/VIB-21662
ASME Biennial 2001 Prospect of Applying Controlling Chaotic Vibration in the Waterborne-Noise Confrontation R. J. Jiang, S. J. Zhu, and L. He, Naval University of Engineering, Hubei, China WEDNESDAY DETC2001/VIB-21663
ASME Biennial 2001 Practical Considerations and Lessons Learned In Setting Up A Virtual Reality System For Industrial Virtual Prototyping Joseph P. De Kroon, Bert Bras, Georgia Institute of Technology DETC2001/CIE-21258
ASME Biennial 2001 Designing Flexible Production Systems with Virtual Reality JŸrgen Gausemeier, Holger Krumm, Michael Grafe, Peter Ebbesmeyer, University of Paderborn DETC2001/CIE-21262
ASME Biennial 2001 Definition Clarification and Review on Virtual Prototyping G. Gary Wang, University of Manitoba DETC2001/CIE-21265
ASME Biennial 2001 A New Method for Building B-Spline Curves and Its Application to Geometry Design and Structured Grid Generation Horacio Florez Guzman, Universidad Sim -n Bol'var; Raœl Manzanilla Morillo, INTESA DETC2001/CIE-21268
ASME Biennial 2001 Automatic Unstructured Mesh Generation around Two-dimensional Domains Described by B-Spline Curves Horacio Florez Guzman, Universidad Simon Bolivar DETC2001/CIE-21269
ASME Biennial 2001 Generalizing of Numerically Solving Methods of Eigenvalue Problems to Asymmetrical, Damping Included Case Shahram Rezaei, Sharif Univerisity of Technology DETC2001/CIE-21270
ASME Biennial 2001 On the Identification of Hysteresis in Inelastic Systems Fai Ma, University of California Challenges DETC2001/CIE-21271
ASME Biennial 2001 Promoting Modularity in Evolutionary Design H. Lipson, J.B. Pollack, Brandeis University, N.P. Suh, MIT DETC2001/DAC-21099
ASME Biennial 2001 Some Preliminary Results on the Development and Comparison of a New Multi- Objective Genetic Algorithm A. Farhang-Mehr, J. Wu, S. Azarm, University of Maryland DETC2001/DAC-21021
ASME Biennial 2001 Effective Generation of Pareto Sets Using Genetic Programming J. Eddy, K. Lewis, University of Buffalo DETC2001/DAC-21094
ASME Biennial 2001 Fuzzy Reform Optimization of Design Task in Concurrent Engineering Y. Zhao, J. Cha, J. Zhang, Northern Jiaotong University DETC2001/DAC-21158
ASME Biennial 2001 Solution Selectors: A User-Oriented Answer to the Geometric Constraint Multiple Solution Problem B. Bettig, Michigan Technological University, J. Shah, Arizona State University DETC2001/DAC-21029
ASME Biennial 2001 A New Mathematical Model for Geometric Tolerances as Applied to Rectangular Faces J. Davidson, Arizona State University DETC2001/DAC-21046
ASME Biennial 2001 An Integrated Framework For 3D Tolerance Chains In Design And Manufacturing E. Ballot, Ecole des Mines de Paris, O. Bourdet, Ecole Normale Superieure de Cachan DETC2001/DAC-21023
ASME Biennial 2001 An Efficient Algorithm for Circular Blending of Edges S.K. Jaiswal, A. Ghosal, B. Gurumoorthy, Indian Institute of Science DETC2001/DAC-21065
ASME Biennial 2001 Computer Assisted Navigation Systems For Hip And Knee Reconstructive Surgery-Evaluation Of Traditional Surgical Technique A. DiGioia, Carnegie Mellon University DETC2001/DAC-21048
ASME Biennial 2001 Design of Multifunctional Compliant Mechanisms for Minimally Invasive Surgery Preliminary Results M. Frecker, Penn State University DETC2001/DAC-21055
ASME Biennial 2001 Development of 5-mm-Trocar Laporascopic Forceps with Mechanical Feedback J. Herder, Delft University DETC2001/DAC-21070
ASME Biennial 2001 Development Of The Endo-Periscope For Improvement Of Depth Perception In Laporascopic Surgery P. Breedveld, Delft University DETC2001/DAC-21031
ASME Biennial 2001 Planned Experiments for Mechanical Assemblies Sue M. Lewis, Christine J. Sexton, Colin P. Please, University of Southampton DETC2001/DFM-21168
ASME Biennial 2001 Assembly/Disassembly Simulation Early During A Design Process Jean-Claude Léon, UMR CNRS; Nicolas Renjneri, Matra Datavision; Gilles Debarbouille, Matra Datavision DETC2001/DFM-21178
ASME Biennial 2001 Towards Massively Parallel MEMS Assembly Robert H. Sturges, Mark W. Abbott, Virginia Polytechnic Institute and State University DETC2001/DFM-21183
ASME Biennial 2001 Variation Propagation of Multi-station Assembly Systems with Compliant Parts. Jack Hu, Jaime A. Camelio, University of Michigan; Dariusz J. Ceglarek, University of Wisconsin DETC2001/DFM-21190
ASME Biennial 2001 A Class of Forms From Function: The Case of Parts Moving in Contact Horea Ilies, Ford Motor Company; Vadim Shapiro, University of Wisconsin at Madison DETC2001/DTM-21704
ASME Biennial 2001 A Methodology for Reusing Freeform Shape Content Joris Vergeest, Imre Horvath, Sander Spanjaard, Delft University of Technology DETC2001/DTM-21708
ASME Biennial 2001 Re-Interpretation of Conceptual Design Sketches in Mechanical Engineering Martin Pache, Udo Lindemann, Technical University of Mÿnchen; Anne Roemer, Winfried Hacker, Technical University of Dresden DETC2001/DTM-21711
ASME Biennial 2001 Transformation of an EGT Grammar: New Grammar, New Designs Xin Li, Linda Schmidt, University of Maryland; Weidong He, Lixing Li, Yuanmei Q ian, Dalian Railway Institute DETC2001/DTM-21716
ASME Biennial 2001 Absorbed Power as an Indicator of Health Risk Associated with Whole-Body Vibration Exposure Rama Bhat, Concordia University; and P.E. Boileau, IRSST, Canada DETC2001/VIB-21348
ASME Biennial 2001 Design of Vibration Absorbers for Step Motions and Step Disturbances Joel Fortgang and William Singhose, Georgia Institute of Technology DETC2001/VIB-21349
ASME Biennial 2001 Investigation of the Dynamic Behavior of a Nonlinear Semi-Definite Mechanical System Khalid Alsaif, King Saud University, Saudi Arabia DETC2001/VIB-21350
ASME Biennial 2001 Dynamics of Flexible Beam Using a Component Mode Synthesis Based Formulation Nobuyuki Kobayashi, Hiroyuki Sugiyama, and Masahiro Watanabe, Aoyama Gakuin University, Japan DETC2001/VIB-21351
ASME Biennial 2001 A Novel Frequency-domain Method of Structural Damage Identification Usik Lee, Jinho Shin, Inha University, South Korea DETC2001/VIB-21396
ASME Biennial 2001 Application of Nonlinear Receptance Coupling to Dynamic Stiffness Evaluation for Reconfigurable Machine Tools Ahmet S. Yigit, Kuwait University, Kuwait; and A. Galip Ulsoy, University of Michigan DETC2001/VIB-21397
ASME Biennial 2001 Bayesian Updating of Nonlinear Model Predictions Using Markov Chain Monte Carlo Simulation James L. Beck, S.K. Au, K.-V. Yuen, California Institute of Technology DETC2001/VIB-21398
ASME Biennial 2001 Optimal Sensor and Actuator Configuration for Structural Identification Costas Papadimitriou, University of Thessaly, Greece DETC2001/VIB-21399
ASME Biennial 2001 An investigation of a rocking-sliding block Lawrence Virgin, Dept. Mechnaical Engineering Duke University DETC2001/VIB-21452
ASME Biennial 2001 Application of the harmonic balance method to ground moling machines operating in periodic regimes Marian Wiercigroch, Aberdeen University, Scotland DETC2001/VIB-21453
ASME Biennial 2001 Feasibility of two-dimensional control for ship-mounted cranes Ali H. Nayfeh, Department of Engineering Science and Mechanics, Virginia Polytechnic Institute and State University DETC2001/VIB-21454
ASME Biennial 2001 Stochastically Pertrubed Rotating Shafts Sri Namachchivaya, Department of Aeronautical and Astronautical Engineering, University of Illinois DETC2001/VIB-21450
ASME Biennial 2001 Analysis of Bifurcations and Chaos in Three Coupled Physical Pendulums with Impacts Jan Awrejcewitcz, Technical University of Lodz ,Department of Automatics and Biomechanics, Poland DETC2001/VIB-21451
ASME Biennial 2001 Smart Structures: Gas Turbine Engine Applications Sanford Fleeter, Patrick B. Lawless, Purdue University DETC2001/VIB-21748
ASME Biennial 2001 Smart Hydrodynamic Bearings Using Surface Micro Vibrations (Presentation Only) Kristin Wood, University of Texas, Austin DETC2001/VIB-21749
ASME Biennial 2001 Control of Magnetic Bearing Spindles During N-Waved Machining Zdzislaw Gosiewski, Aviation Institute; Jerzy T. Sawicki, Kenneth R. Bischof, Cleveland State University DETC2001/VIB-21740
ASME Biennial 2001 Sensorless Early Detection of Mechanical Faults: Developments in Smart Rotating Machines Alexander G. Parlos, Kyusung Kim, Raj M. Bharadwaj, Texas A&M University DETC2001/VIB-21750
ASME Biennial 2001 Fault Tolerant Control of Magnetic Bearings Uhn Joo Na, Alan B. Palazzolo, Texas A&M University; Andrew Provenza, Benjamin Choi, Gerald Montague, Albert Kascak, NASA Glenn Research Center DETC2001/VIB-21751
ASME Biennial 2001 Aquatic Mobile Robot using Waving Motion of a Flexible Fin Koichi Muramatsu, Masahiro Watanabe & Nobuyuki Kobayashi, Aoyama-Gakuin University, Japan DETC2001/VIB-21528
ASME Biennial 2001 Obstacle Avoidance for 2D Hyper-Redundant Manipulators Using Harmonic Potential Functions and the Mode Shape Technique Farbod Fahimi, Hashem Ashrafiuon & C. Nataraj, Villanova University DETC2001/VIB-21527
ASME Biennial 2001 Analysis of Varying Natural Frequencies and Damping Ratios of a Sample Parallel Manipulator Throughout Its Workspace using Linearized Equations of Motion Kris Kozak, Imme Ebert-Uphoff & William Singhose, Georgia Institute of Technology DETC2001/VIB-21529
ASME Biennial 2001 Large Deflection Dynamics and Control for Planar Continuum Robots Ian A. Gravagne, Christopher D. Rahn & Ian D. Walker, The Pennsylvania State University DETC2001/VIB-21530
ASME Biennial 2001 Dynamics and Stability of a Nonlinear Brake Model J. Wauer and J. Heilig, Institute fur Technische Mechanik, Universitat Karlsruhe, Germany DETC2001/VIB-21579
ASME Biennial 2001 Signal Based Methods to Extract a Priori Information for the Identification of Nonlinear Systems J-U Bruns and K. Popp, Institute of Mechanics, University of Hannover, Germany DETC2001/VIB-21578
ASME Biennial 2001 Mechanics of Regenerative Vibration Drilling: Analytical and Experimental Study of the Formation of Lobed Holes P.V. Bayly, S.G. Calvert, Dept. of Mechanical Eng., Washington University, St. Louis, MO; M.T. Lamar, Applied Physics Lab, Baltimore, MD DETC2001/VIB-21580
ASME Biennial 2001 Stability of Interrupted Cutting by Temporal P.V. Bayly, B.P. Mann, Dept. of Mechanical Engineering, Washington University, St. Louis, MO; J.E. Halley, The Boeing Co., St. Louis, MO; M.A. Davies, NIST, Gaithersburg, MD DETC2001/VIB-21581
ASME Biennial 2001 A Nonlinear Model of Machining Dynamics M.S. Fofana, Manufacturing Engineering Program, Worcester Polytechnic Institute, Worcester, MA; S. Bukkapatnam, Industrial and Systems Engineering, University of Southern California, Los Angeles, CA DETC01/VIB 21755: Using Triaxial Accelerometer Data for DETC2001/VIB-21582
ASME Biennial 2001 Calibrating Virtual Environments for Engineering Applications Um Jayaram, Roglenda Repp, Washington State University DETC2001/CIE-21264
ASME Biennial 2001 A Haptics-Based Virtual Environment for Engineering Design and Manufacturing Applications Cartik Sharma, T. Kesavadas, State University of New York at Buffalo DETC2001/CIE-21266
ASME Biennial 2001 Design Synthesis in a Virtual Environment Douglas Maxwell, Alley Butler,Louisiana Tech University; Rob King, Naval Research Laboratory DETC2001/CIE-21267
ASME Biennial 2001 Dynamics and Distributed Control of Conical Shell Laminated with Full and Diagonal Actuators H. S.Tzou, D. W.Wang, W. K.Chai, University of Kentucky DETC2001/CIE-21272
ASME Biennial 2001 Prediction of Thermal Displacements in Finite Element Tool Models Jšrg Abmus, Niels Wessel, JŸrgen Kurths, University of Potsdam; Frank Weidermann, Jan Konvicka, Steffen Nestmann, Raimund Neugebauer, Fraunhofer IWU, Chemnitz DETC2001/CIE-21273
ASME Biennial 2001 Response of Submerged Structures by the Finite Element-cum-Boundary Element Method C. W. S. To, University of Nebraska; M. A. O'Grady, DETC2001/CIE-21274
ASME Biennial 2001 Hybrid Strain Based Finite Element Modeling of Laminated Plates with Distributed Piezoelectric Components C. W. S. To, Wei Lu, University of Nebraska DETC2001/CIE-21275
ASME Biennial 2001 Sketch Based Mesh Extrusion with Remeshing Techniques Charlie C. L. Wang, Matthew M. F. Yuen, Hong Kong University of Science and Technology DETC2001/CIE-21305
ASME Biennial 2001 Computer-Based Design of Disc Brakes by Multi-Objective Form Optimization Sayed M. Metwalli, Hesham A. Hegazi, Cairo University DETC2001/CIE-21680
ASME Biennial 2001 Problem Formulation and Basic Elements for Automated Multi-Piece Mold Design Yong Chen, David Rosen, Georgia Institute of Technology DETC2001/CIE-21293
ASME Biennial 2001 Virtual Prototyping Based Design Optimization of PEM Fuel Cell Gas Delivery Plates Rong Zheng, Zuomin Dong, University of Victoria DETC2001/CIE-21296
ASME Biennial 2001 A Decision-Support Design Tool for Thermoplastic Feature Design for Dimensional Stability J. Patrick, Hewlett Packard, L. Stauffer, University of Idaho DETC2001/DAC-21127
ASME Biennial 2001 Optimization of the Closure-Weld Region of Cylindrical Containers for Long- Term Corrosion Resistance Z. Ceylan, M. Trabia, University of Nevada, Las Wegas DETC2001/DAC-21133
ASME Biennial 2001 Comparison of Combined Embodiment Design and Control Optimization Strategies using Optimality Conditions J. A. Reyer, H. K. Fathy, P.Y. Papalambros, A. G. Ulsoy, University of Michigan DETC2001/DAC-21119
ASME Biennial 2001 Minimum Fuel Consumption and Co-Emission and Optimum Speed of the Motorcycle with a CVT Y.M. Huang, B.S. Hu, National Taiwan University DETC2001/DAC-21072
ASME Biennial 2001 Finding and Removing Features from Polyhedra J. Ribelles, Universitat Laume, P. Heckbert, T. Stahovich, V. Srivatava, Carnegie Mellon University, M. Garland, University of Illinois DETC2001/DAC-21068
ASME Biennial 2001 Tool Path Generation Based on B-Spline Wavelets R. Narayanaswami, J. Pang, Iowa State University DETC2001/DAC-21108
ASME Biennial 2001 Analysis Of A Geometric Specification P. Serre, A. Riviere, Institut Supérieur des Matériaux et de la Construction Mécanique, A.N. Duong, A. Ortuzar, Dassault Systemes DETC2001/DAC-21123
ASME Biennial 2001 The Computation Of 3D Pattern Matching As A Tool For Conceptual Freeform Shape Design J.S.M. Vergeest, S. Spanjaard, Delft University of technology DETC2001/DAC-21139
ASME Biennial 2001 Modeling of an Electroactive Steerable End-Effector for Minimally Invasive Surgery M. Frecker, Penn State University DETC2001/DAC-21056
ASME Biennial 2001 A Robot For Hand Rehabilitation: A Continuation Of The MIT-MANUS Neuro- Rehabilitation Workstation H. Krebs, MIT DETC2001/DAC-21085
ASME Biennial 2001 Design Of Passive Reconfigurable Manipulation Assistive Aids V. Krovi, Mcgill University DETC2001/DAC-21087
ASME Biennial 2001 Perfect Static Balance With Normal Springs J. Herder, Delft University DETC2001/DAC-21069
ASME Biennial 2001 Greedy Tool Heuristic for Rough Milling of Complex Pockets Ajay Joneja, Shaoming Zhu, Hong Kong University of Science and Technology; Yuan-Shin Lee, North Carolina State University DETC2001/DFM-21179
ASME Biennial 2001 Form Follows Function: Case-Based Learning over Product Evolution William H. Wood, Manish Verma, University of Maryland at Baltimore DETC2001/DFM-21182
ASME Biennial 2001 Intra-setup Planner and Rule Editor: Combining Human Flexibility And Control with Automation in Process Planning Caroline C. Hayes, Vipin Sharma, University of Minnesota DETC2001/DFM-21186
ASME Biennial 2001 Strategic Decisions in the Early Stages of Product Family Design Georges M. Fadel, Jonathan R. A. Maier, Clemson University DETC2001/DFM-21200
ASME Biennial 2001 Determining Relationships Between Modularity and Cost in Product Retirement Y. Zhang, S. Allamneni, Utah State University; K. Gershenson, Michigan Technological University DETC2001/DTM-21686
ASME Biennial 2001 Interfaces and Product Architecture Mike Van Wie, James Greer, Matthew Campbell, Robert Stone, University of Missouri at Rolla; Kristin Wood, University of Texas at Austin DETC2001/DTM-21689
ASME Biennial 2001 Modularization to Support Multiple Brand Platforms Agus Sudjianto, Ford Motor Company; Kevin Otto, Massachusetts Institute of Technology DETC2001/DTM-21695
ASME Biennial 2001 Platform Product Development: Product Model Anders Claesson, Hans Johannesson, Chalmers University of Technology; Stellan Gedell, Saab Automobile AB DETC2001/DTM-21714
ASME Biennial 2001 Non linear Effects in Dynamic Analysis of Flexible Multibody Systems Y.C. Mbono Samba, Yaounde I University, M. Pascal, Pierre et Marie Curie University, France DETC2001/VIB-21353
ASME Biennial 2001 Experimental Validation of a Dynamical Model for Flexible Link Mechanisms R. Caracciolo, A. Gasparetto, A. Trevisani, Universita di Padova, Italy DETC2001/VIB-21354
ASME Biennial 2001 Comparison Between Flexible Multibody Tracked Vehicle Simulation and Experimental Data Toshikazu Nakanishi, Komatsu, Ltd.; and Koji Isogai, Kyushu University, Japan DETC2001/VIB-21355
ASME Biennial 2001 Experimental and Analytical Investigation on Spaghetti Problem Yoshimasa Komaki, Nobuyuki Kobayashi and Masahiro Watanabe, Aoyama Gakuin University, Japan DETC2001/VIB-21356
ASME Biennial 2001 Plastic Deformation of Steel Safety Guardrails D., Neuenhaus, Christian Kammel, U.J. Gessler, and G. Sedlacek, Aachen University of Technology, Germany DETC2001/VIB-21357
ASME Biennial 2001 Instant Chaos Extreme Parametric Uncertainty and Sustained Chaotic Transients in Nonlinear Continuum Mechanics Ira Schwartz, Ioanna Triandaf, Yvette Wood, US Naval Research Laboratory, Ioannis Georgiou, National Technical University of Athens, Greece DETC2001/VIB-21400
ASME Biennial 2001 Pattern Formation in a Parametrically Excited P.D.E. Michael Stubna, Richard H. Rand, Cornell University DETC2001/VIB-21401
ASME Biennial 2001 A System Identification Technique Using Pseudo-wavelets for General Linear Systems Zhikun Hou, Adriana Hera, Worcester Polytechnic Institute DETC2001/VIB-21402
ASME Biennial 2001 Reduction of Arbitrary Dynamical Systems by Wavelet Bases Roger Ghanem, John Hopkins University and Fransesco Romeo, University of Rome, Italy DETC2001/VIB-21403
ASME Biennial 2001 K-L Decomposition for Reducing the Order and Monitoring of the Dynamics of Coupled Oscillators Xianghong Ma, General Electric R&D, Alexander F. Vakakis, National Technical University of Athens, Greece and University of Illinois, Lawrence Bergman, University of Illinois DETC2001/VIB-21404
ASME Biennial 2001 Forced response of a SDOF friction oscillator colliding with a hysteretic obstacle Ugo Andreaus, Dipartimento di Ingegneria Strutturale e Geotecnica, Università di Roma "La Sapienza", Italy DETC2001/VIB-21455
ASME Biennial 2001 Study of an elastoplastic model with an infinite number of degrees of freedom Charles H. Lamarque, Ecole Nationale des Travaux Publics de l'Etat, Département Génie Civil Bâtiment, France DETC2001/VIB-21456
ASME Biennial 2001 Discontinuous bifurcations in stick-slip mechanical systems Ugo Galvanetto, Department of Aeronautics, Imperial College of Science, Technology and Medicine, United Kingdom DETC2001/VIB-21457
ASME Biennial 2001 Periodic and non-periodic thermomechanic responses of shape memory oscillators Walter Lacarbonara, Dipartimento di Ingegneria Strutturale e Geotecnica, Università di Roma "La Sapienza", Italy DETC2001/VIB-21458
ASME Biennial 2001 Analysis of piecewise linear systems with boundaries in displacement and velocity using vector fields Mikio Nakai, Faculty of Engineering, Department of Precision Engineering, Kyoto University, Japan DETC2001/VIB-21459
ASME Biennial 2001 Active Stabilization of Centrifugal Compressor Using Adjustable Geometry Impeller K. M. Saad Eldin, University of Maryland DETC2001/VIB-21736
ASME Biennial 2001 A Theoretical Model of Oscillations of Paramagnetic or Diamagnetic Structures Subject to Passive Magnetic Elements Bruno A. Piombo and Elvio Bonisoli, Politecnico di Torino; Massimo Ruzzene, Catholic University of America DETC2001/VIB-21737
ASME Biennial 2001 Newtonian and Variational Formulations of the Vibrations of Plates With Active Constrained Layer Damping Chul H. Park and A. Baz, University of Maryland DETC2001/VIB-21738
ASME Biennial 2001 Localization and Control of Wave Propagation in Active Periodic Fluid-Loaded Shells M. Ruzzene, Catholic University of America and A. Baz, University of Maryland DETC2001/VIB-21739
ASME Biennial 2001 Sensorless Modal Stabilization for Three-Link Robotic Arm With Elastic Wrist Drive Belt Martin Hosek, Brooks Automation, Inc. DETC2001/VIB-21531
ASME Biennial 2001 Dynamic Modeling of a Non-Redundant Spatial Mobile Manipulator James M. Stiles, University of California, Davis, Jae H. Chung, Stevens Institute of Technology & Steven A. Velinsky, University of California, Davis DETC2001/VIB-21532
ASME Biennial 2001 Open-loop Control of a Flexible Manipulator With Two Links: Experimental Results G. Mimmi, L. Frosini, Universita degli studi di Pavia, Italy, P. Pennacchi & C. Rottenbacher, Politecnico di Milano, Italy DETC2001/VIB-21533
ASME Biennial 2001 The Robust Adaptive Control Of Free-Floating Space Manipulator Systems Chen Li, Fuzhou University, China, Liu Yanzhu, Shanghai Jiaotong University, China DETC2001/VIB-21534
ASME Biennial 2001 Nonlinear and Chaotic Snap-Through Response of Buckling Plates under Sinusoidal Base Excitation C-F Ng, W-Y Poon, Y-Y Lee, Dept. of Civil and Structural Engineering, The Hong Kong Polytechnic University, Hong Kong DETC2001/VIB-21583
ASME Biennial 2001 Twinkling Phenomena in Snap-Through Oscillators B.F. Feeny and A.R. Diaz, Dept. of Mechanical Engineering, Michigan State University, East Lansing, MI DETC2001/VIB-21584
ASME Biennial 2001 Improved Estimations of Unstable Periodic Orbits Extracted from Chaotic Sets B.F. Feeny, Dept. of Mechanical Engineering, Michigan State University, East Lansing, MI; Z. Al-Zamel, Dept. of Mechanical and Automotive Engineering, GOTEVT, Saudi Arabia DETC2001/VIB-21585
ASME Biennial 2001 Studies on Codimension-3 Degenerate Bifurcations of the Flexible Beam W. Zhang, College of Mechanical Engineering, Beijing Polytechnic University, China DETC2001/VIB-21586
ASME Biennial 2001 Perturbation Solution for Secondary Bifurcation in the Quadratically-Damped Mathieu Equation R.H. Rand, Dept. of Theoretical and Applied Mechanics, Cornell University, Ithaca, NY; W.L. Keith, D.V. Ramani, Naval Undersea Warfare Center, Newport, RI DETC2001/VIB-21587
ASME Biennial 2001 Optical and Electronic Design of a Laser-Based Vehicle Delineation Detection System Bin Lin, Harry H. Cheng, Benjamin D. Shaw, Bo Chen, University of California at Davis; Joe Palen, Office of New Technology and Research DETC2001/CIE-21668
ASME Biennial 2001 An Intelligent Hydraulic Valve System Based on Field Message Communication Weibo Li, Wei Li, Yu Wang, Genmao Wu, Zhejiang University DETC2001/CIE-21669
ASME Biennial 2001 Timing Studies of Real-Time Linux for Control Frederick M. Proctor, William P. Shackleford, National Institute of Standards and Technology DETC2001/CIE-21670
ASME Biennial 2001 Steepest-Directed Tool Path in 3-Axis CNC Machining - The Most Efficient Machining Scheme and Its Mathematical Proof Zezhiong C. Chen, Zuomin Dong, Geoffrey W. Vickers, University of Victoria DETC2001/CIE-21301
ASME Biennial 2001 An Algorithm to Generate Efficient Cutter Path for Pocket Milling Operations using Modified Zigzag Strategy Satyandra K. Gupta, Sunil K. Saini, Zhiyang Yao, University of Maryland DETC2001/CIE-21303
ASME Biennial 2001 Tool Path Planning Algorithm of Normal Curvature Approach Milling Model for Freeform Surfaces Xianzhong Yi, Jianghan Petroleum University DETC2001/CIE-21297
ASME Biennial 2001 Automatic Determination Of The Small Displacements In A Mechanical Assembly Of Two Parts C. Forster, E. Dore, UTC, France DETC2001/DAC-21053
ASME Biennial 2001 Comparative Study Of Seismic Analises For Piping Systems F. Jonsdottir, M. T. Jonsson, University of Iceland DETC2001/DAC-21076
ASME Biennial 2001 Derivation Of Analytical Expressions For Calculation Of Agma Geometry Factor J For External Spur Gears A. Sahir Arikan, Middle East Technical University, Turkey DETC2001/DAC-21120
ASME Biennial 2001 The Inluence Of Optimization In The Problems Of Waves Propagation In Cylindrical Shells A. Sarkisyan, Yerevan State University, Armenia DETC2001/DAC-21122
ASME Biennial 2001 An Approach to Sweeping NURBS J. Yang, K. Abdel-Malek, J. Cremer, University of Iowa DETC2001/DAC-21150
ASME Biennial 2001 A Finite Element Approach to Direct Surface Manipulation A. Marsan, Y. Chen, P. Stewart, Ford Motor Company DETC2001/DAC-21103
ASME Biennial 2001 Capturing Assembly Tolerances and Criteria in a Common Model E. Morse, University of North Carolina at Charlotte DETC2001/DAC-21107
ASME Biennial 2001 On the Classification of Fitting Problems for Single Patch Free-Form Surfaces in Reverse Engineering M.M. Shalaby, A.O. Nassef, S. Metawalli, Cairo University DETC2001/DAC-21105
ASME Biennial 2001 Three Equation Kinematic Models For The Human Knee Passive Motion Simulation M. Carricato, University Of Bologna DETC2001/DAC-21111
ASME Biennial 2001 Path Verification For Unstructured Environments And Medical Applications L. Stocco, Integrated Surgical Systems, Inc. DETC2001/DAC-21128
ASME Biennial 2001 Mouth Operated Neurosurgical Robot T. Sugar, Arizona State University DETC2001/DAC-21130
ASME Biennial 2001 Mobility Analysis of RSSR Mechanisms by Working Volume W-Y. Chung, Chinese Culture University DETC2001/DAC-21045
ASME Biennial 2001 Designing a Requirement Driven Product Development Process Qi Dong, Daniel Whitney, Massachusetts Institute of Technology DETC2001/DTM-21682
ASME Biennial 2001 Product Development Using Advanced Simulation Soo-Haeng Cho, Steven Eppinger, Massachusetts Institute of Technology DETC2001/DTM-21691
ASME Biennial 2001 Assessment of Rework Probabilities for Simulating Product Development Processes Ali Yassine, Daniel Whitney, Tony Zambito, Massachusetts Institute of Technology DETC2001/DTM-21693
ASME Biennial 2001 Complexity of Planning in Design Christopher Earl, Jeffrey Johnson, Open University; Claudia Eckert, Cambridge University DETC2001/DTM-21697
ASME Biennial 2001 An Investigation of Catalogues Product Development Information at a Major Consumer Products Company Timothy Hoffman, Steven Shooter, Bucknell University; Simon Szykman, Steven Fenves, National Institute of Standards and Technology DETC2001/DTM-21690
ASME Biennial 2001 Thermal Behavior of Aluminum Metal-Matrix Composite During Cooling Process Aydin Turgut, Firat University; F. Okumus, MIGYEM Md. DETC01/RSAFP-21744
ASME Biennial 2001 A Novel Strategy for Probability Based Failure Avoidance of Operating Technical Systems. Dirk Soffker, University of Wuppertal DETC01/RSAFP-21745
ASME Biennial 2001 The Effects on the Critical Load of Metal-Matrix Composite Plates with a Hole Under In-plane Loading Aydin Turgut, Firat University; F. Okumus, MIGYEM Md. DETC01/RSAFP-21746
ASME Biennial 2001 Evaluation of Combustion Chamber Leakage for Condition Based Maintenance of Four Stroke Marine Diesel Engines Md. Abul Mollah Hossain, University Putra Malaysia DETC01/RSAFP-21747
ASME Biennial 2001 Closed Form Solutions to the Equations of Motion Avoiding Mass Matrix Inversion and Eigenvectors Decomposition K. Reaud, C. Vallee, D. Fortune, Universite de Poitiers, France DETC2001/VIB-21358
ASME Biennial 2001 Identification of Multi-Body Dynamics by External Force/Torque Measurements Martin Grotjahn and Bodo Heimann, University of Hannover, Germany DETC2001/VIB-21359
ASME Biennial 2001 Utilization of Coupled Simulation in the Fatigue Loads Prediction of a Hydraulically Driven Log Crane Aki M. Mikkola, Lappeenranta University of Technology, Finland DETC2001/VIB-21360
ASME Biennial 2001 The Automatic Stabilization Algorithm for Euler-Lagrange Equations with Holonomic Constraints in Multibody System Dynamics Pan Zhenkuan, and Zhao Weijia, Qingdao University, China DETC2001/VIB-21362
ASME Biennial 2001 Computationally Efficient Time-domain Modeling of Fluid Transmission Lines Bernhard Manhartsgruber, University of Linz, Austria DETC2001/VIB-21406
ASME Biennial 2001 Failure Prediction Using Nonlinear Short-time Prediction and Multi-time Scale Recursive Estimation J.P. Cusumano, Penn State University, D. Chelidze, University of Rhode Island, A. Chatterjee, Indian Institute of Science - Bangalore, India DETC2001/VIB-21407
ASME Biennial 2001 Biomechanical Considerations in Antenatal Care of High Risk Pregnancies Rama B. Bhat, Concordia University, Padmavathi P. Bhat, Sahana Clinic, India DETC2001/VIB-21408
ASME Biennial 2001 POD (K-L) Analysis of the Interaction Free Dynamics of a Beam/Pendulum Configuration: An Experimental Study Ioannis Georgiou, National Technical University of Athens, Ira Schwartz, US Naval Research Laboratory DETC2001/VIB-21409
ASME Biennial 2001 Modelling and Analysis of Frictional Phenomena in Dynamical Systems Roman Bogacz, Institute of Fundamental Technological Research, Warsaw, Poland DETC2001/VIB-21768
ASME Biennial 2001 Non-Smooth Variational Problem in Mechanics Jerzy Bajkowski, Warsaw University of Technology, Poland DETC2001/VIB-21769
ASME Biennial 2001 Nonlinear Analysis of Rotor Systems Including a Bearing Clearance by the Multiple Shooting Method David Demailly, Laboratoire de Tribologie et Dynamique des Systemes, Ecole Centrale de Lyon, France DETC2001/VIB-21770
ASME Biennial 2001 Modeling of Electro-Rheological Materials (Presentation Only) DETC2001/VIB-21753: Magneto-Elastic Compliant Mechanisms Janarthanan Venkataraghavan, Arun R. Srinivas, Texas A&M University DETC2001/VIB-21752
ASME Biennial 2001 A Model to Evaluate the Aerodynamic Energy Requirements of Active Materials in Morphing Wings Gregory W. Pettit, Harry H. Robertshaw, Frank H. Gern, Daniel J. Inman, Virginia Polytechnic Institute and State University DETC2001/VIB-21754
ASME Biennial 2001 Structural Diagnostics Using Nonlinear Analysis (SDNA) with Smart Sensor Arrays Douglas.E.Adams, Purdue University and R.W.Bano, The Modal Shop Inc. DETC2001/VIB-21535
ASME Biennial 2001 A Structural Health Monitoring System for Laminated Composites S.H.Diaz Valdes and C. Soutis, Imperial College of Science, Technology and Medicine, United Kingdom DETC2001/VIB-21539
ASME Biennial 2001 Evaluation of Distributed Sensor for Structural Health Monitoring M.J.Sundaresan,A.Ghoshal,W.N.Martin, and M.J.Schulz, North Carolina A & T University DETC2001/VIB-21541
ASME Biennial 2001 Scattering and Transmission of Mixed-Mode Waves in Delaminated Thick Composite Beams D.R.Mahapatra and S. Gopalakrishnan, Indian Institute of Science, Bangalore, India and T.S.Sankar, University of Quebec, Canada DETC2001/VIB-21543
ASME Biennial 2001 Phase Shift Near Natural Frequencies of Nonlinear Rods I.T. Georgiou, Dept. of Naval Architecture and Marine Engineeing, National Technical University of Athens, Greece DETC2001/VIB-21588
ASME Biennial 2001 Nonplanar Motion of a String due to Two-Frequency Excitation K. Kamiya, K. Yasuda, Dept. of Electronic-Mechanical Engineering, Nagoya University, Japan DETC2001/VIB-21591
ASME Biennial 2001 Coupled Slow and Fast Dynamics of Flow Excited Elastic Cable Systems N. Perkins, University of Michigan DETC2001/VIB-21589
ASME Biennial 2001 Nonlinear Modeling and Identification of the Dynamic Behavior of Polyurethane Foam P. Davies, A.K. Bajaj, R. Singh, School of Mechanical Engineering, Purdue University, West Lafayette, IN DETC2001/VIB-21592
ASME Biennial 2001 Unified Approach to Study Noisy Nonlinear Mathieu-Type Systems N.S. Namachchivaya, Dept. of Aeronautical and Astronautical Engineering, R.B. Sowers, Dept. of Mathematics, University of Illinois at Urbana-Champaign, IL; H.J. Van Roessel, Dept. of Mathematical Sciences, University of Alberta, Edmonton, Alberta, Canada DETC2001/VIB-21590
ASME Biennial 2001 Physically Based Modeling in Virtual Assembly Yong Wang, Uma Jayaram, Sankar Jayaram, Washington State University; Kevin Lyons, National Institute of Standards and Technology DETC2001/CIE-21259
ASME Biennial 2001 Analysis of the Robotic Assembling Accuracy Based on Virtual Assembly Environment Zhang Zheng, Luo Xuebuo, Xie Cunxi, South China University of Technology DETC2001/CIE-21263
ASME Biennial 2001 Fast and Smooth NC Milling Animation Using Partial Redrawing Technique Masatomo Inui, Makoto Takano, Ibaraki University DETC2001/CIE-21260
ASME Biennial 2001 Prediction and Diagnosis of Propagated Errors in Assembly Systems using Virtual Factories Cem M.Baydar, Kazuhiro Saitou, University of Michigan DETC2001/CIE-21261
ASME Biennial 2001 Web-based Interactive Design of Freeform Motions S.T. Li, Metalsoft Inc., Q.J. Ge, SUNY Stony Brook, A. Varshney, University of Maryland DETC2001/DAC-21138
ASME Biennial 2001 Material Instrumentation : A Differents Points Of View Cristallization In The Multi-Trade Products Design, An Visual And Tactile Field Application N. Stoeltzlen, S. Minel, C. Bouchard, D. Millet, A. Aoussat, ENSAM DETC2001/DAC-21129
ASME Biennial 2001 An approach to Computer Aided Conceptual Design of the Mechanical Products with Middle Complex Level X. Cheng, L. Changyi, Nanjing University of Science and Technology DETC2001/DAC-21041
ASME Biennial 2001 Conflict Elimination of Product Concurrent Design Based on Black Model Y. Zhao, Northern Jiaotong University DETC2001/DAC-21159
ASME Biennial 2001 Design Automation Rationale by Dichromatic Graphs J. Escanaverino, J. Liamos-Soriz, A.G. Toll, T.O. Cardenas, ISPJAE, Cuba DETC2001/DAC-21050
ASME Biennial 2001 A Meta-Object Based Approach to Finite Element Modeling S. Shanbhag, I. Grosse, J.C. Wileden, University of Massachusetts, A. Kaplan, Clemson University DETC2001/DAC-21062
ASME Biennial 2001 CAD/FEM analysis of teeth contact stress and load share in face gears S. Barone, L. Borgianni, P. Forte, University of Pisa DETC2001/DAC-21027
ASME Biennial 2001 Sheet Modeling and Thickening Operations Based on Non-Manifold Boundary Representations S.H. Lee, H-S. Kim, Kookmin University DETC2001/DAC-21010
ASME Biennial 2001 View-Dependent Deformation with Sketching Input C.L. Wang, M.F. Yuen, The Hong Kong University of Science and Technology DETC2001/DAC-21142
ASME Biennial 2001 Rapid Manufacturing By Laser Aided Direct Metal Deposition Process: Issues and Examples J. Choi, University of Missouri-Rolla, J. Mazuder, University of Michigan DETC2001/DAC-21043
ASME Biennial 2001 Support Structures Extraction for Hybrid Layered Manufacturing J. Ruan, J. Zhang, F. Liou, University of Missouri-Rolla DETC2001/DAC-21098
ASME Biennial 2001 Fluid Mechanics of Slot Coating in Layered Manufacturing M. Haberer, C.B. Park, Paraschvoiu, B. Benhabib, University of Toronto, G. Zak, Queen's University DETC2001/DAC-21156
ASME Biennial 2001 Adaptive Slicing for a Five-axis Laser Aided Manufacturing Process J. Zhang, University of Missouri-Rolla DETC2001/DAC-21157
ASME Biennial 2001 Basin of Attraction of the Simplest Walking Model A.L. Schwab, and M. Wisse, Delft University of Technology, Netherlands DETC2001/VIB-21363
ASME Biennial 2001 An Adding Mass Method for Stiff Dynamic System Simulation and Applications to Construction Machinery Etsujiro Imanishi, Satoshi Yonezawa, and Naoki Sugano, Kobe Steel; and Eiko Hirooka, Kobelco Research Institute; and Takahiro Kobayashi, Kobelco Construction Machinery,Japan DETC2001/VIB-21364
ASME Biennial 2001 Stochastic Analysis of a Fractionally Damped Beam Om P. Agrawal, Southern Illinois University DETC2001/VIB-21365
ASME Biennial 2001 An Efficient Finite Element Modeling Tool for Surgical Simulation: the E-Mesh Radius N. Azouz, S. Payandeh, CEMIF, France DETC2001/VIB-21366
ASME Biennial 2001 A Numerical Method for Multibody System Frictional Impact Simulation Evtim V. Zahariev, Bulgarian Academy of Sciences, Bulgaria DETC2001/VIB-21367
ASME Biennial 2001 Dynamic Instability and Nonlinear Vibration of Doubly-curved Cross-ply Shallow Shells Ali H. Nayfeh, Khaled Alhazza, Virginia Polytechnic Institute and State University DETC2001/VIB-21410
ASME Biennial 2001 Parametric Identification and Fault Detection in Vehicle Models with Nonlinear Suspension P. Metallidis, G. Verros, and S. Natsiavas, Aristotle University of Thessaloniki, and C. Papadimitriou, University of Thessaly, Greece DETC2001/VIB-21411
ASME Biennial 2001 Nonlinear Parametric Identification of Oscillating Cables Using Wavelets F. Romeo, V. Gattulli, and F. Benedettini, University of L'Aquila, Italy DETC2001/VIB-21405
ASME Biennial 2001 Structure-excitation Modal Decoupling by Modification of the Involved Acoustic Modes of the Sound Insulating Enclosure Christos Papadopoulos, National Technical University of Athens, Greece DETC2001/VIB-21412
ASME Biennial 2001 Bayesian Estimation of Cumulative Damage from Seismic Response Records of a Building E. Heredia-Zavoni, A. Zeballos, and L. Esteva, Instituto de Ingenieria, UNAM, Mexico DETC2001/VIB-21413
ASME Biennial 2001 Theory, Experiments and Simulation of Instantaneous Collisions of Solids Eric Dimnet, Laboratoire Lagrange, Laboratoire central des ponts et chaussees DETC2001/VIB-21771
ASME Biennial 2001 Active Control for a 2DoF of Building Including Elastoplastic Soil-structure Coupling Terms Claude-Henry Lamarque, Ecole Nationale des Travaux Publics de l'Etat DETC2001/VIB-21772
ASME Biennial 2001 Dynamic Polytope Function and Control Modeling Ichiro Hagiwara, Department of Mechanical Science and Engineering, Tokyo Institute of Technology DETC2001/VIB-21773
ASME Biennial 2001 Vibration Simulation of Hydraulic Hammers Kwun-Lon Ting, Manufacturing Center Tennessee Technological University DETC2001/VIB-21774
ASME Biennial 2001 Optimal Design of Underwater Shells with Active Stiffeners W. Akl and A. Baz, University of Maryland, and M. Ruzzene, Catholic University DETC2001/VIB-21496
ASME Biennial 2001 Optimization in the Simulation Based Design Environment W. A. Kusmik, NAVSEA Division Newport DETC2001/VIB-21497
ASME Biennial 2001 Simulation-Based Design of Hybrid Vibration Mounts J. H. Su, Carderock Division, Naval Surface Warfare Center DETC2001/VIB-21495
ASME Biennial 2001 Analysis of Pump Induced Radiated Noise from Undersea Vehicles S. Hassan and R. Roberts, NAVSEA Division Newport Panel on Noise Control with Simulation Based Design A. Baz, University of Maryland, W. A. Kusmik, NAVSEA Division, Newport, RI, J. H. Su, Carderock Division, Naval Surface Warfare Center, Bethesda, MD, and DETC2001/VIB-21498
ASME Biennial 2001 Distributed Modal Signals of Nonlinear Paraboloidal Shells with Distributed Neurons H.S.Tzou and J.H.Ding, University of Kentucky, Lexington DETC2001/VIB-21545
ASME Biennial 2001 An Experimental Approach To the Design of PVDF Sensors D.Cuhat and P.Davies, Purdue University DETC2001/VIB-21537
ASME Biennial 2001 Vibration Testing and Control of Inflatable Structures Using Smart Materials G.Park, M.H.Kim, M.Mandian, and D.J.Inman, Virginia Polytechnic Institute and State University DETC2001/VIB-21540
ASME Biennial 2001 Modal Volatges and Distributed Signal analysis of Conical Shells of Revolution H.S.Tzou,W.K.Chai,and D.W.Wang,University of Kentucky, Lexington DETC2001/VIB-21544
ASME Biennial 2001 Digital Signal Processor Based Active Vibration control System Using Adaptive Control Algorithm And Smart Actuators/Sensors P.Shashikala,V.Shankar,and R.Balasubramanium,National Aerospace Laboratories, Bangalore, India DETC2001/VIB-21538
ASME Biennial 2001 Finite Element Analysis of Thermal Buckling and Postbuckling of Composite Plates with embedded SMA Z.Weifeng, Z .Jung, and Wu Yongdong, Huazhong University of Science and Technaology, China DETC2001/VIB-21536
ASME Biennial 2001 Order Reduction of Bilinear Systems Containing a Clearance E. Butcher, University of Alaska, Fairbanks DETC2001/VIB-21732
ASME Biennial 2003 Flexible Multibody Systems With Large Deformations Using Absolute Nodal Coordinates for Isoparametric Solid Brick Elements Lars Kubler, Peter Eberhard, Johannes Geisler DETC2003/VIB-48303
ASME Biennial 2003 The Vectorial Parameterization of Motion Olivier A. Bauchau, Jou-Young Choi DETC2003/VIB-48304
ASME Biennial 2003 Flexible Multibody System Applications Using Nodal and Modal Coordinates Oskar Wallrapp, Simon Wiedemann DETC2003/VIB-48305
ASME Biennial 2003 Comparison of the Absolute Nodal Coordinate and the Floating Frame of Reference Formulation by Means of a Simplified Strain Formulation, J. Gerstmayr DETC2003/VIB-48306
ASME Biennial 2003 Comparison of Physical Experiments and Computer Simulation With ANCF: Large Deformation of a Thin Cantilever Beam Wan-Suk Yoo, Jeong-Han Lee, Jeong-Hyun Sohn, Su-Jin Park, Oleg Dmitrochenko, Dmitri Pogorelov DETC2003/VIB-48307
ASME Biennial 2003 Effect of Tapered Guide Shape on Spaghetti Problems Nobuyuki Kobayashi, Yoshimasa Komaki, Takamure Irie, Masahiro Watanabe DETC2003/VIB-48308
ASME Biennial 2003 Extracting Signatures for Rigid Body Motion and Modes of Coupled Vibration in Elastic Multi-Rod Mechanisms by POD Processing of the Finite Element Dynamics of a Motion Ioannis T. Gerogiou, Mohammad A. Bani-Khaled DETC2003/VIB-48309
ASME Biennial 2003 Numerical Continuation Methods and Bifurcation Analysis Applied to Multibody System Dynamics J. P. Meijaard DETC2003/VIB-48310
ASME Biennial 2003 A Modular Dynamic Model for Multibody System Adapted to Interactive Simulation N. Seguy, P. Joli, Z. Q. Feng, M. Pascal DETC2003/VIB-48311
ASME Biennial 2003 Parallel Computing Procedure Based on DAE for Multibody Dynamics Yoshitaka Takahashi, Nobuyuki Shimizu DETC2003/VIB-48312
ASME Biennial 2003 A Gluing Algorithm for Distributed Simulation of Multibody Systems Jinzhong Wang, Zheng-Dong Ma, Gregory M. Hulbert DETC2003/VIB-48313
ASME Biennial 2003 Constraint Gradient Projective Method for Stabilized Dynamic Simulation of Constrained Multibody Systems Zdravko Terze, Joris Naudet, Dirk Lefeber DETC2003/VIB-48314
ASME Biennial 2003 A Hybrid Global-Topological Real-Time Formulation for Multibody Systems Javier Cuadrado, Daniel Dopico DETC2003/VIB-48315
ASME Biennial 2003 Methods of Recursive Coordinate Reduction Kurt S. Anderson, James H. Critchley DETC2003/VIB-48316
ASME Biennial 2003 On Parallel Methods of Multibody Dynamics James H. Critchley, Kurt S. Anderson DETC2003/VIB-48317
ASME Biennial 2003 A Novel Approach for the Dynamic Analysis and Simulation of Constrained Mechanical Systems Jozef Kovecses, Jean-Claude Piedboeuf DETC2003/VIB-48318
ASME Biennial 2003 Motion and Vibration of a Moving Body on the 3D Trajectory Considering Running Resistance Katsuhisa Fujita, Yuji Funakoshi, Yoshiko Hayami, Yoshinori Yamamoto DETC2003/VIB-48319
ASME Biennial 2003 Motion of a Tethered System Under Attitude Control With Large Deformation, Rotation and Translation Shoichiro Takehara, Yoshiaki Terumichi, Masahiro Nohmi, Kiyoshi Sogabe DETC2003/VIB-48320
ASME Biennial 2003 A Non-Incremental Nonlinear Finite Element Solution for Cable Problems Hiroyuki Sugiyama, Aki M. Mikkola, Ahmed A. Shabana DETC2003/VIB-48321
ASME Biennial 2003 Torsional Buckling and Writhing Dynamics of Elastic Cables and DNA S. Goyal, N. C. Perkins, Christopher L. Lee DETC2003/VIB-48322
ASME Biennial 2003 Stability and Dynamic Analysis of the SET (Short Electrodynamic Tether) J. Valverde, J. L. Escalona, J. Dominguez, E. Freire DETC2003/VIB-48323
ASME Biennial 2003 Biaxial Vibrations of an Elasto-Plastic Beam With a Prescribed Rigid-Body Rotation M. Dibold, J. Gerstmayr, H. Irschik DETC2003/VIB-48324
ASME Biennial 2003 Studies on the Stiffness Properties of the Absolute Nodal Coordinate Formulation for Three-Dimensional Beams Jussi T. Sopanen, Aki M. Mikkola DETC2003/VIB-48325
ASME Biennial 2003 Use of Plasticity Theory in Flexible Multibody System Dynamics Hiroyuki Sugiyama, Ahmed A. Shabana DETC2003/VIB-48326
ASME Biennial 2003 Estimation of Partial Frequency Response Functions of a Parametrically Excited Flexible Multibody System Thorsten Prothmann, Delf Sachau DETC2003/VIB-48327
ASME Biennial 2003 Describing Rigid-Flexible Multibody Systems Using Natural and Absolute Nodal Coordinates D. Garcia-Vallejo, J. L. Escalona, J. Mayo, J. Dominguez, A. Alvarez DETC2003/VIB-48328
ASME Biennial 2003 Rosenbrock-Nystrom Integrator for SSODE of Mechanical Systems Adrian Sandu, Dan Negrut, Corina Sandu, Edward J. Haug, Florian A. Potra DETC2003/VIB-48329
ASME Biennial 2003 Implementing the Extended Reduced Order Physical Model Into Commercialized Software Packages: Implementing Modal Constraints Into Software Packages Takahito Sagane, Takao Kinoshita, Hiroshi Tajima, Kazuto Seto DETC2003/VIB-48330
ASME Biennial 2003 Multibody Inverse Dynamics Using an Energy Preserving Direct Transcription Process Carlo L. Bottasso, Alessandro Croce DETC2003/VIB-48331
ASME Biennial 2003 A Self-Stabilized Algorithm for Enforcing Constraints in Multibody Systems Olivier A. Bauchau DETC2003/VIB-48332
ASME Biennial 2003 A New Method for the Path Planning of an In-Pipe Inspection Robot Vincent Artigue, Madeleine Pascal DETC2003/VIB-48333
ASME Biennial 2003 Heart Composite Material Model for Stress-Strain Analysis Zhenhua Hu, Dimitris Metaxas, Leon Axel DETC2003/VIB-48334
ASME Biennial 2003 A Method to Investigate Vibrations in Tendon Driven Mechanisms F. Londi, P. P. Valentini, L. Vita DETC2003/VIB-48335
ASME Biennial 2003 Tonal Tuning of a Variable Inertia Vibration Absorber: A Feasibility Study Behrooz Fallahi, Said Megahed, Mohammed Seif DETC2003/VIB-48336
ASME Biennial 2003 A Shape Description Model by Using Sensor Data From Touch Venturia Chiroiu, Ligia Munteanu, Cornel Mihai Nicoleascu DETC2003/VIB-48337
ASME Biennial 2003 Dynamic Analysis and Contact Modeling for Two Dimensional Media Transport System H. J. Cho, D. S. Bae, J. H. Choi, Takashi Suzuki DETC2003/VIB-48338
ASME Biennial 2003 An Efficient Method for Contact/Impact Problems in Multibody Systems: Tree Topologies Kurt S. Anderson, Michael J. A. Sadowski DETC2003/VIB-48339
ASME Biennial 2003 An Efficient Method for Contact/Impact Problems in Multibody Systems: Topologies With Many Loops Kurt S. Anderson, Michael J. A. Sadowski DETC2003/VIB-48340
ASME Biennial 2003 Impact and Bifurcation of Flexible Multibody Systems Evtim V. Zahariev DETC2003/VIB-48341
ASME Biennial 2003 Formulation of Multibody Dynamics as Complementarity Problems J. C. Trinkle DETC2003/VIB-48342
ASME Biennial 2003 Asperity Spring Friction Model With Application to Belt-Drives Tamer M. Wasfy DETC2003/VIB-48343
ASME Biennial 2003 Dynamic Modeling and Simulation of Satellite Tethered Systems Kalyan K. Mankala, Sunil K. Agrawal DETC2003/VIB-48344
ASME Biennial 2003 Modeling and Control of Flexible Transporter System With Arbitrarily Time-Varying Cable Lengths Yuhong Zhang, Sunil K. Agrawal, Peter Hagedorn DETC2003/VIB-48345
ASME Biennial 2003 Dynamics Analysis of the Time-Varying Operation of Belt-Drives Michael Leamy DETC2003/VIB-48346
ASME Biennial 2003 Kinematic Analysis of Brake-Induced Vehicle Steering Wheel Vibration Wei-Yi Loh, Rena Basch, Tom Dalka DETC2003/VIB-48347
ASME Biennial 2003 From Off-Line to Real Time Simulations by Model Reduction and Modular Vehicle Modelling E. Pankiewicz, W. Rulka DETC2003/VIB-48348
ASME Biennial 2003 Experimental Approach for Finding the Response Time of MR Dampers for Vehicle Applications Fernando D. Goncalves, Jeong-Hoi Koo, Mehdi Ahmadian DETC2003/VIB-48349
ASME Biennial 2003 Optimal Comfort Response of Road Vehicles Using Flexible Multibody Dynamics Joao P. C. Goncalves, Jorge A. C. Ambrosio DETC2003/VIB-48350
ASME Biennial 2003 Edge Projected Planar Rectangular Element for Modeling Flexible Multibody Systems Tamer M. Wasfy DETC2003/VIB-48351
ASME Biennial 2003 Dynamic Modeling of a Flexible Cantilever Beam: An Experimental Technique S. M. Megahed, A. A. Nada DETC2003/VIB-48352
ASME Biennial 2003 A New Type Component Mode Synthesis Beam Element Based on the Absolute Nodal Coordinate Formulation Riki Iwai, Nobuyuki Kobayashi DETC2003/VIB-48353
ASME Biennial 2003 Spatial Joint Constraints in Flexible Multibody Systems Using the Absolute Nodal Coordinate Formulation Hiroyuki Sugiyama, Jose L. Escalona, Ahmed A. Shabana DETC2003/VIB-48354
ASME Biennial 2003 Dynamic Modeling of High-Speed Flexible Links Jinyang Liu, Jiazhen Hong DETC2003/VIB-48355
ASME Biennial 2003 Reconstruction of the Dynamic Rail-Wheel Contact Forces Svenja Kirchenkamp, Dirk Soffker DETC2003/VIB-48356
ASME Biennial 2003 Multibody Dynamics and Vibration Analysis for Railcar Wheelset Design Studies Werner Schiehlen, Holger Claus DETC2003/VIB-48357
ASME Biennial 2003 A Technique for Validating a Multibody Wheel/Rail Contact Algorithm Jose L. Escalona, Manuel Gonzalez, Khaled E. Zaazaa, Ahmed A. Shabana DETC2003/VIB-48358
ASME Biennial 2003 Three-Dimensional Multibody Tracked Vehicle Modeling and Simulation Corina Sandu, Jeffrey S. Freeman DETC2003/VIB-48359
ASME Biennial 2003 A Nonlinear Finite Element Model for Leaf Springs Mohamed A. Omar, Hiroyuki Sugiyama, Ahmed A. Shabana, Wei-Yi Loh, Rena Basch DETC2003/VIB-48360
ASME Biennial 2003 Vibration of an Euler-Bernoulli Uniform Beam Carrying Several Thin Disks S. Naguleswaran DETC2003/VIB-48361
ASME Biennial 2003 Extermal Properties of Some Resonant Motions of Natural Celestial Bodies Vladimir V. Beletskii, Anatoli A. Khentov DETC2003/VIB-48362
ASME Biennial 2003 On the Bending of a Cantilever Flexible Beam With an Embedded Ribbon of Shape Memory Alloy Veturia Chiroiu, Ligia Munteanu, Calin Chiroiu DETC2003/VIB-48363
ASME Biennial 2003 Study on Air Spring's Finite Element Model Shanyue Wu, Yingyun Huang, Shijian Zhu DETC2003/VIB-48364
ASME Biennial 2003 Six Degree of Freedom Active Isolation in Flexible Supporting Structures: Numerical Simulation and Experiment Yuan Cheng, Qian Zhou, Ge-Xue Ren, Hui Zhang DETC2003/VIB-48365
ASME Biennial 2003 Neuro-Fuzzy Control of Smart Flexible Mechanisms Ahmad Smaili, Fouad Mrad, Hadi Maamoun DETC2003/VIB-48366
ASME Biennial 2003 Multibody Dynamics of the 2 Sections Flexible Ladder Model Extending and Retracting Each Other Katsuhisa Fujita, Katsutoshi Koike, Yasuhiro Shiono, Takuro Koseki DETC2003/VIB-48367
ASME Biennial 2003 Recursive Method for the Dynamic Analysis of Open-Loop Flexible Multibody Systems Yunn-Lin Hwang DETC2003/VIB-48368
ASME Biennial 2003 General Dynamic Model of Flexible Multi-Body Systems With Its Application in Gun Systems GuoLai Yang, Yunsheng Chen DETC2003/VIB-48369
ASME Biennial 2003 Early Development of Fractional Order Control Shunji Manabe DETC2003/VIB-48370
ASME Biennial 2003 On Fractional Order Disturbance Observer YangQuan Chen, Blas M. Vinagre, Igor Podlubny DETC2003/VIB-48371
ASME Biennial 2003 Robust Speed Control of a Low Damped Four Mass System Based on CRONE Control Jocelyn Sabatier, Serge Poullain, Patrick Latteux, Alain Oustaloup, Jean Luc Thomas DETC2003/VIB-48372
ASME Biennial 2003 Modal Placement Control Method for Fractional Systems: Application to a Testing Bench Jocelyn Sabatier, Olivier Cois, Alain Oustaloup DETC2003/VIB-48373
ASME Biennial 2003 The Time-Varying Fractional Order Difference Equations Piotr W. Ostalczyk DETC2003/VIB-48374
ASME Biennial 2003 A Fractional Calculus Perspective of PID Tuning Ramiro S. Barbosa, J. A. Tenreiro Machado, Isabel M. Ferreira DETC2003/VIB-48375
ASME Biennial 2003 Geometric Interpretation of Discrete Fractional Order Controllers Based on Sampling Time Scaling Property and Experimental Verification of Fractional 1/Sa Systems' Robustness Chengbin Ma, Yoichi Hori DETC2003/VIB-48376
ASME Biennial 2003 Comparison of Fractional and Integer Order Control of an Hexapod Robot Manuel F. Silva, J. A. Tenreiro Machado, Antonio M. Lopes DETC2003/VIB-48377
ASME Biennial 2003 The Hydractive CRONE Suspension: Operation Principle and Stability Study Olivier Altet, Xavier Moreau, Alain Oustaloup, Cedric Nouillant DETC2003/VIB-48380
ASME Biennial 2003 The CRONE Suspension: Modelling and Stability Analysis Xavier Moreau, Olivier Altet, Alain Oustaloup DETC2003/VIB-48381
ASME Biennial 2003 Preshaping Command Inputs for 2nd Generation CRONE Control: Application on an Instrumented DC Motor Bench Pierre Melchior, Alexandre Poty, Bruno Orsoni, Alain Oustaloup DETC2003/VIB-48382
ASME Biennial 2003 Fractional Order Dynamics in the Trajectory Planning of Redundant and Hyper-Redundant Manipulators Fernando B. M. Duarte, J. A. Tenreiro Machado DETC2003/VIB-48383
ASME Biennial 2003 Fractional Calculus Model of the Semilunar Heart Valve Vibrations Moustafa El-Shahed DETC2003/VIB-48384
ASME Biennial 2003 A Local Fractional Derivative Xiaorang Li, Christopher Essex, Matt Davison DETC2003/VIB-48385
ASME Biennial 2003 Averaging for Oscillations With Light Fractional Order Damping Pankaj Wahi, Anindya Chatterjee DETC2003/VIB-48386
ASME Biennial 2003 H Norm of Fractional Differential Systems 2 Rachid Malti, Mohamed Aoun, Olivier Cois, Alain Oustaloup, Francois Levron DETC2003/VIB-48387
ASME Biennial 2003 Optimal Fractional-Order Damping Tom T. Hartley, Carl F. Lorenzo DETC2003/VIB-48388
ASME Biennial 2003 Numerical Simulations of Fractional Systems Mohamed Aoun, Rachid Malti, Francois Levron, Alain Oustaloup DETC2003/VIB-48389
ASME Biennial 2003 Modelling and Simulation of Fractional Systems Using a Non-Integer Integrator Thierry Poinot, Jean-Claude Trigeassou DETC2003/VIB-48390
ASME Biennial 2003 A New Discretization Method for Fractional Order Differentiators via Continued Fraction Expansion YangQuan Chen, Blas M. Vinagre, Igor Podlubny DETC2003/VIB-48391
ASME Biennial 2003 The Fractional Fourier Transform and Its Applications to Image Representation and Beamforming I. Samil Yetik, M. Alper Kutay, Haldun M. Ozaktas DETC2003/VIB-48392
ASME Biennial 2003 Fractional Order: Frequential Parametric Identification of the Skin Effect in the Rotor Bar of Squirrel Cage Induction Machine Sylvain Canat, Jean Faucher DETC2003/VIB-48393
ASME Biennial 2003 Initial Condition Problems of Fractional Viscoelastic Equations Masataka Fukunaga, Nobuyuki Shimizu DETC2003/VIB-48394
ASME Biennial 2003 Internal Variable Models of Viscoelasticity With Fractional Relaxation Laws A. Hanyga DETC2003/VIB-48395
ASME Biennial 2003 Implementation of Fractional Calculus Using Hierarchical Models: Application to the Terminal Transition of a Complex Polymer Nicole Heymans DETC2003/VIB-48396
ASME Biennial 2003 Application of Fractional Derivatives to Modeling the Quasi-Static Response of Polyurethane Foam Rong Deng, Patricia Davies, Anil K. Bajaj DETC2003/VIB-48397
ASME Biennial 2003 On the Generalized Navier-Stokes Equations Moustafa El-Shahed, Ahmed Salem DETC2003/VIB-48399
ASME Biennial 2003 Dynamics of Infinite Beams Described by Fractional Time Derivatives Peter Ruge, Carolin Trinks DETC2003/VIB-48400
ASME Biennial 2003 Fractional Giona-Roman Equation on Heterogeneous Fractal Structures in External Force Fields and Its Solutions Fu-Yao Ren, Jin-Rong Liang, Wei-Yuan Qiu, Yun Xu DETC2003/VIB-48401
ASME Biennial 2003 Forced Vibrations of Continuous Rotor With Strong Geometrical Nonlinearity Imao Nagasaka, Jun Liu, Yukio Ishida, Kouta Katou DETC2003/VIB-48403
ASME Biennial 2003 Non-Linear Dynamics of a Rotor-Bearing System Based on the Invariant Manifold Approach Cristiano Viann Serra Villa, Jean-Jacques Sinou, Fabrice Thouverez DETC2003/VIB-48404
ASME Biennial 2003 Chaotic Vibration and Internal Resonance Phenomena in Rotor Systems: Part I - Theoretical Analysis Tsuyoshi Inoue, Yukio Ishida DETC2003/VIB-48405
ASME Biennial 2003 Chaotic Vibration and Internal Resonance Phenomena in Rotor Systems: Part II - Experimental Analysis Tsuyoshi Inoue, Yukio Ishida DETC2003/VIB-48406
ASME Biennial 2003 Dynamic Analysis of the Optical Disk Drive System Equipped With an Automatic Ball Balancer With Consideration of Torsional Motion Chun-Chieh Wang, Cheng-Kuo Sung, Paul C. P. Chao DETC2003/VIB-48407
ASME Biennial 2003 Problems of Vibration Near Critical Speeds in Rigid Rotors With Autobalancing Devices Boris Ryzhik, Lutz Sperling, Henner Duckstein DETC2003/VIB-48408
ASME Biennial 2003 Stability Investigation of a Two-Link 3DOF Rotational Pendulum Roland Horvath, George T. Flowers, Ruel A. Overfelt DETC2003/VIB-48409
ASME Biennial 2003 Experimental Investigation of a System With Multiple Nearly Identical Centrifugal Pendulum Vibration Absorbers Tyler M. Nester, Alan G. Haddow, Steven W. Shaw DETC2003/VIB-48410
ASME Biennial 2003 A New Modeling Technique and Control System Design of a Flexible Rotor Supported by Active Magnetic Bearings for Motion and Vibration Control Mitsuhiro Ichihara, Hideo Shida, Takahito Sagane, Hiroshi Tajima, Muneharu Saigou, Kazuto Seto DETC2003/VIB-48411
ASME Biennial 2003 Optimal Design in Flexible Rotor-Sliding Bearing System With Squeeze Film Damper Yong-Zhong Lu, Dao-Sun Liao DETC2003/VIB-48412
ASME Biennial 2003 Dynamic Analysis of an Unsymmetrical Rotor Supported by Oil Film Bearing Zhansheng Liu, Senlin Huang, Jiexian Su, Songbo Xia DETC2003/VIB-48414
ASME Biennial 2003 Nonlinear Simulation Analysis and Experiment of Fluid Plain Journal Bearing With Incompressible Fluid Katsuhisa Fujita, Atsuhiko Shintani, Koji Yoshioka, Kouhei Okuno, Hiroaki Tanaka, Yasuhiro Asaida, Hiroaki Saito DETC2003/VIB-48415
ASME Biennial 2003 Experimental Study on Vibration Properties and Control of Squeeze Mode MR Fluid Damper-Flexible Rotor System Jianxiao Wang, Guang Meng, Eric Hahn DETC2003/VIB-48416
ASME Biennial 2003 Nonlinear Free Vibration of a Rotor Shaft System With Viscoelastically Supported Bearings N. Shabaneh, J. W. Zu DETC2003/VIB-48417
ASME Biennial 2003 Test Response of a Turbocharger Supported on Floating Ring Bearings: Part I - Assessment of Subsynchronous Motions Chris Holt, Luis San Andres, Sunil Sahay, Peter Tang, Gerry La Rue, Kostantin Gjika DETC2003/VIB-48418
ASME Biennial 2003 Test Response of a Turbocharger Supported on Floating Ring Bearings: Part II - Comparisons to Nonlinear Rotordynamic Predictions Chris Holt, Luis San Andres, Sunil Sahay, Peter Tang, Gerry La Rue, Kostantin Gjika DETC2003/VIB-48419
ASME Biennial 2003 Response and Stability of a Gas Pocket Damper Seal to Large Rotor Displacements Ramon Alberto Aguilar Armendariz, John M. Vance DETC2003/VIB-48420
ASME Biennial 2003 Aeroelastic Flutter of a Flexible Disk Rotating in an Enclosed Compressible Fluid Nambheol Kang, Arvind Raman DETC2003/VIB-48421
ASME Biennial 2003 Investigation of Turbine Coolers Vibration Parameters Vladimir L. Simonov DETC2003/VIB-48422
ASME Biennial 2003 Annulus Whirling Motion Analysis of the Rotary Drill String by the Action of Hydrodynamic Pressure and Friction Force Wensheng Xiao, Yang Zhang, Yifang Zhong DETC2003/VIB-48423
ASME Biennial 2003 An Efficient Algorithm for Blade Loss Simulations Using a High Fidelity Ball Bearing and Damper Model Guangyoung Sun, Nikhil Kaushik, Alan B. Palazzolo, Andrew J. Provenza, Charles Lawrence, Kelly Carney DETC2003/VIB-48424
ASME Biennial 2003 Ball Bearing Vibration Analysis Including Localized and Distributed Defects Jussi T. Sopanen, Aki M. Mikkola DETC2003/VIB-48425
ASME Biennial 2003 A Set-Valued Force Law for Spatial Coulomb-Contensou Friction Remco I. Leine, Christoph Glocker DETC2003/VIB-48426
ASME Biennial 2003 Contact Pressure of Quadrupedal Animals Dan B. Marghitu, Steven F. Swaim, Paul F. Rumph, Dorian Cojocaru, Robert L. Gillette, M. Stacie Scardino DETC2003/VIB-48427
ASME Biennial 2003 Vibration Suppression by an Elastic Impact Damper Kimihiko Yasuda, Keisuke Kamiya, Rentaro Kato DETC2003/VIB-48428
ASME Biennial 2003 Stress and Strain Tensors in Granular Medium Application to Masonry Structures Brahim Chetouane, Claude Bohatier, Frederic Dubois, Marc Vinches DETC2003/VIB-48430
ASME Biennial 2003 New Hydraulic System Modelling Friedrich Pfeiffer, Fredrik Borchsenius, Martin Foerg DETC2003/VIB-48431
ASME Biennial 2003 Constraint Stabilization for Time-Stepping Approaches for Rigid Multibody Dynamics With Joints, Contact, and Friction Mihai Anitescu, Andrew Miller, Gary D. Hart DETC2003/VIB-48432
ASME Biennial 2003 Convergence Behaviors of Reduced-Order Models for Frictional Contacts D. Deshmukh, E. J. Berger DETC2003/VIB-48433
ASME Biennial 2003 Modeling of the Dynamics of Jointed Beam Structures Yaxin Song, D. Michael McFarland, L. A. Bergman, C. J. Hartwigsen, Alexander F. Vakakis DETC2003/VIB-48434
ASME Biennial 2003 Reduction of Structural Dynamics Models Having Nonlinear Damping Jihwan Kim, T. D. Burton DETC2003/VIB-48435
ASME Biennial 2003 Experimental Study of Nonlinear Effects in a Typical Shear Lap Joint Configuration Christian J. Hartwigsen, Yaxin Song, D. Michael McFarland, Lawrence Bergman, Alexander F. Vakakis DETC2003/VIB-48436
ASME Biennial 2003 Joint Parameters Identification of a Structure With Large Number of Discrete Joints J. H. Wang, S. C. Chuang DETC2003/VIB-48437
ASME Biennial 2003 On the Development of a Model Updating Strategy of Non-Linear Vibrating Structures Gaetan Kerschen, Jean-Claude Golinval DETC2003/VIB-48438
ASME Biennial 2003 The Nonlinear Vibration and Stability of Axially Traveling Thin Plates Albert C. J. Luo, Hamid R. Hamidzadeh DETC2003/VIB-48439
ASME Biennial 2003 Dynamic Characterization and Stability of a Large Size Multibody Tiltrotor Model by POD Analysis Pierangelo Masarati, Giuseppe Quaranta, Massimiliano Lanz, Paolo Mantegazza DETC2003/VIB-48440
ASME Biennial 2003 Component Mode Synthesis Using Nonlinear Normal Modes Polarit Apiwattanalunggarn, Steven W. Shaw, Christophe Pierre DETC2003/VIB-48441
ASME Biennial 2003 Order Reduction of Nonsmooth Structural Systems With Multiple Surfaces of Discontinuity Eric A. Butcher, Rongdong Lu DETC2003/VIB-48442
ASME Biennial 2003 Nonlinear Normal Modes for Vibratory Systems Under Periodic Excitation Dongying Jiang, Christophe Pierre, Steven W. Shaw DETC2003/VIB-48443
ASME Biennial 2003 Frequency Shifting in Nonlinear Resonant Systems With Damping Abdelghani Znider, D. Dane Quinn DETC2003/VIB-48444
ASME Biennial 2003 Order Reduction of Nonlinear Time Periodic Systems Using Invarient Manifolds S. C. Sinha, Sangram Redkar, Eric A. Butcher, Venkatesh Deshmukh DETC2003/VIB-48445
ASME Biennial 2003 Nonlinear Dynamics of a System of Coupled Oscillators With Essential Stiffness Nonlinearities Alexander F. Vakakis, Richard H. Rand DETC2003/VIB-48446
ASME Biennial 2003 A POD-Based Identification of the Reduced Dynamics of an Exact Nonlinear Rod Loaded Transversely Ioannis T. Georgiou, Christos E. Kanavis DETC2003/VIB-48447
ASME Biennial 2003 System Identification of Mistuned Bladed Disks From Traveling Wave Response Measurements D. M. Feiner, J. H. Griffin, K. W. Jones, J. A. Kenyon, O. Mehmed, A. P. Kurkov DETC2003/VIB-48448
ASME Biennial 2003 Numerical Identification of Electromagnetic Force Parameters for Linearized Rotordynamic Model of Cage Induction Motors Timo P. Holopainen, Asmo Tenhunen, Erkki Lantto, Antero Arkkio DETC2003/VIB-48449
ASME Biennial 2003 Coupling of an Aircraft Landing Gear Simulation Strategy to Parameter Identification Techniques for Enhanced Fidelity Tood Rook DETC2003/VIB-48450
ASME Biennial 2003 Study on the Method of Modified Random Decrement for Transfer Function Zhenzhong Zhang, Shijian Zhu DETC2003/VIB-48451
ASME Biennial 2003 Dynamical Systems Approach to Material Damage Diagnosis David Chelidze DETC2003/VIB-48452
ASME Biennial 2003 Structure Preserving Transformations and Isospectral Flows for Second Order Systems Michael I. Friswell, Seamus D. Garvey, Uwe Prells DETC2003/VIB-48453
ASME Biennial 2003 Reliability-Based Optimal Design of Fluid Filled Tanks Under Seismic Excitation C. Theodosiou, P. Aichouh, S. Natsiavas, C. Papadimitriou DETC2003/VIB-48454
ASME Biennial 2003 A Model for the Coupled Lift and Drag on a Circular Cylinder Ali H. Nayfeh, Farouk Owis, Muhammad R. Hajj DETC2003/VIB-48455
ASME Biennial 2003 Motion and Vibration Control of a Flexible Transportation System Keisuke Takemoto, Masato Mori, Toru Watanabe, Kazuto Seto DETC2003/VIB-48456
ASME Biennial 2003 Statistical Approximations of Power Flow for a Vehicle Structure With Uncertainties Soo-Yeol Lee, Matthew P. Castanier, Christophe Pierre DETC2003/VIB-48457
ASME Biennial 2003 Damper Seal Comparison in a High Pressure Re-Injection Centrifugal Compressor During Full-Load, Full-Pressure Factory Testing Using Direct Rotordynamic Stability Measurement J. Jeffrey Moore, Thomas A. Soulas DETC2003/VIB-48458
ASME Biennial 2003 Rotor Stability Criteria for Multi-Stage Centrifugal Compressors John W. Fulton DETC2003/VIB-48459
ASME Biennial 2003 Usage of the Lund Rotordynamic Programs in the Analysis of Centrifugal Compressors Edmund A. Memmott DETC2003/VIB-48460
ASME Biennial 2003 Nonlinear Response Characteristics of a Cracked Rotor in Maneuvering Aircraft Fu-Sheng Lin, Guang Meng, Eric Hahn DETC2003/VIB-48462
ASME Biennial 2003 Dynamic Evaluation of a Three Point Mount Baseplate for a Motor Driven, Centrifugal Compressor Package Joseph S. Kubany IV, Joseph A. Tecza, Per Gustafsson DETC2003/VIB-48463
ASME Biennial 2003 Reduction of High-Amplitude Cogging Torque Response in a 12,000 Horsepower Synchronous Drive Motor James M. Corliss, Siddharth Pant, Kevin Hui, Larry Duddy, Jon Veno DETC2003/VIB-48464
ASME Biennial 2003 Stability Considerations for a Vertical Mount Energy Storage Flywheel Jess Underwood, R. Gordon Kirk DETC2003/VIB-48465
ASME Biennial 2003 Aeroelastic Flutter of a Rotating Disk in an Unbounded Compressible Inviscid Fluid Anirban Jana, Arvind Raman DETC2003/VIB-48466
ASME Biennial 2003 Hydrostatic Gas Journal Bearings for Micro-Turbomachinery L. X. Liu, C. J. Teo, A. H. Epstein, Z. S. Spakovsky DETC2003/VIB-48467
ASME Biennial 2003 Scaling Laws for Ultra-Short Hydrostatic Gas Journal Bearings Z. S. Spakovszky, L. X. Liu DETC2003/VIB-48468
ASME Biennial 2003 An Optimal Shaft Balance Solution Using Integer Programming Eric Bechhoefer, Shawn Tayloe DETC2003/VIB-48469
ASME Biennial 2003 An Analytical Prediction of the Global Period-1 Motion in a Periodically Forced, Piecewise Linear System Santhosh Menon, Albert C. J. Luo DETC2003/VIB-48470
ASME Biennial 2003 A Review of Optimal Shock Isolation Yinglong Zhao, Lin He, Yu Wang DETC2003/VIB-48471
ASME Biennial 2003 Measuring Vibration Isolator¡¯s Shock Characteristics by Air Gun Xuetao Weng, Yingyun Huang, Shijian Zhu, Yu Wang DETC2003/VIB-48472
ASME Biennial 2003 The Experimental Study on the Shock Stiffness of Rubber Isolator Tan Bo, Yingyun Huang, Gang Chen DETC2003/VIB-48473
ASME Biennial 2003 A Parametric Absorber for Friction-Induced Vibrations Horst Ecker DETC2003/VIB-48474
ASME Biennial 2003 Modified PIO Design for Robust Unknown Input Estimation Idriz Krajcin, Dirk Soffker DETC2003/VIB-48475
ASME Biennial 2003 An Original Setup Test Rig for Analysing Lubricated Contact Under Dynamic Normal Excitation Forces Toufiq El Kilali, Joel Perret-Liaudet, Denis Mazuyer DETC2003/VIB-48476
ASME Biennial 2003 Multivalued Stochastic Differential Equations and Its Applications in Dynamics F. Bernardin, C. H. Lamarque, M. Schatzman DETC2003/VIB-48477
ASME Biennial 2003 Stability Analysis of the Rocking Block: Numerical Investigations on Analytical Stability Boundaries Alessio Ageno, Anna Sinopoli DETC2003/VIB-48478
ASME Biennial 2003 Numerical and Experimental Investigations of Simple Non-Linear System Modelling a Girling Duo-Servo Brake Mechanism Jan Awrejcewicz, Pawel Olejnik DETC2003/VIB-48479
ASME Biennial 2003 Modeling and Numerical Investigation of Non-Linear Dynamics of a Mono-Cylinder Combustion Engine Jan Awrejcewicz, Grzegorz Kudra DETC2003/VIB-48480
ASME Biennial 2003 Order-Component Separation and Ranking of Dynamic Signals Using Angular-Information Kalman-Filtering Order Tracking Min-Chun Pan, Yu-Fong Lin DETC2003/VIB-48481
ASME Biennial 2003 Operating Investigation of Transmission Systems Using Advanced Time-Frequency Representations Min-Chun Pan, Jeng-Yi Huang DETC2003/VIB-48482
ASME Biennial 2003 Order Tracking Filtering Based on Instantaneous Frequency Estimation and Zero-Phase Distortion Digital Filtering Shuren Qin, Yu Guo DETC2003/VIB-48483
ASME Biennial 2003 Cutting Vibration Monitoring Using a Spindle Displacement Sensor in Turning IlHae Kim, Dong Young Jang DETC2003/VIB-48484
ASME Biennial 2003 Modeling and Identification of Polyurethane Foam in Uniaxial Compression: Combined Elastic and Viscoelastic Response Rajani K. Ippili, Richard D. Widdle, Jr., Patricia Davies, Anil K. Bajaj DETC2003/VIB-48485
ASME Biennial 2003 Low-Cost Control of Impact Hammer Performance Jenny Jerrelind, Harry Dankowicz DETC2003/VIB-48486
ASME Biennial 2003 Dynamic Response of Whole Body System Subjected to Walking Generated Excitation Rama B. Bhat DETC2003/VIB-48487
ASME Biennial 2003 Stability Analysis of a Vibrational System Subject to Negative Viscous Damping and Displacement-Dependent Dry Friction Damping Aldo A. Ferri, Wayne E. Whiteman DETC2003/VIB-48488
ASME Biennial 2003 Shock Isolation Through Passive Energy Pumping in a System With Piecewise Linear Stiffnesses Fotios Georgiadis, Alexander F. Vakakis, D. Michael McFarland, Lawrence Bergman DETC2003/VIB-48490
ASME Biennial 2003 The Application of Adaptive Canceling in Chaos Identification Shuyong Liu, Shijian Zhu, Zhenming Liu, Weiian Qian DETC2003/VIB-48491
ASME Biennial 2003 Discrete Dynamic Modeling of Shafts With Transverse Cracks Using Bond Graph Mohammad Durali, Hosein Borhan DETC2003/VIB-48492
ASME Biennial 2003 Multi-Objective Parameter Identification in Structural Dynamics Y. Haralampidis, M. Pavlidou, C. Papadimitriou DETC2003/VIB-48493
ASME Biennial 2003 Updating Nonlinear Dynamical Models Using Response Measurements Only Ka-Veng Yuen, James L. Beck DETC2003/VIB-48494
ASME Biennial 2003 A Proper Orthogonal Decomposition Analysis to Identify the Dominant Modes of the Steady State Acoustic Pressure Field in a Cavity Ioannis T. Gerogiou, Christos I. Papadopoulos DETC2003/VIB-48495
ASME Biennial 2003 Three Conditions Lyapunov Exponents Should Satisfy Jingjun Lou, Shijian Zhu DETC2003/VIB-48496
ASME Biennial 2003 Bifurcation Analysis of Nonlinear Vibration Isolation System With Hard Stiffness by Cell Mapping Xiang Yu, Shijian Zhu, Jingjun Lou DETC2003/VIB-48497
ASME Biennial 2003 Performance of Piecewise Linear Vibration Isolators Under Harmonic Excitation Qiwei He, Jingjun Lou, Shijian Zhu DETC2003/VIB-48498
ASME Biennial 2003 Three Fingered Flexible Fixture Design Siamak Arzanpour, James K. Mills, William L. Cleghorn DETC2003/VIB-48500
ASME Biennial 2003 Compliance Optimisation for Robotic Assembly I. Sharf, A. Bykov DETC2003/VIB-48501
ASME Biennial 2003 Distributed-Parameters Base Modeling and Vibration Analysis of Micro-Cantilevers Used in Atomic Force Microscopy Nader Jalili, Mohsen Dadfarnia, Darren M. Dawson DETC2003/VIB-48502
ASME Biennial 2003 Vibration of a Flexible Manipulator Carrying Offset Payloads S. Naguleswaran DETC2003/VIB-48503
ASME Biennial 2003 Design of Extended Kalman Filter for a Shape Memory Alloy Manipulator Mohammad H. Elahinia, Hashem Ashrafiuon, Mehdi Ahmadian, William T. Baumann DETC2003/VIB-48504
ASME Biennial 2003 Dynamic Modeling and Simulation of Impact in Tether Net/Gripper Systems Kalyan K. Mankala, Sunil K. Agrawal DETC2003/VIB-48505
ASME Biennial 2003 Modeling and Direction Control of 2 D.O.F Heavy Launching Bed on a Moving Car Using a Full Suspension Model Mohammad Durali, Arash Afsharzadeh DETC2003/VIB-48506
ASME Biennial 2003 Variable Damping Design in Position Control of Flexible Single Arm Michael J. Panza DETC2003/VIB-48507
ASME Biennial 2003 Multiple Cooperating Robot Dynamics and Fuzzy Logic Control for Internal Force Minimization Manish Kumar, Devendra P. Garg DETC2003/VIB-48508
ASME Biennial 2003 Effect of Dynamics on Path Planning of Mobile Robots Bryan Wenzel, C. Nataraj DETC2003/VIB-48509
ASME Biennial 2003 Comparison of Two Distributed Fuzzy Logic Controllers for Two-Link Rigid-Flexible Manipulator Linda Z. Shi, Mohamed B. Trabia DETC2003/VIB-48510
ASME Biennial 2003 Robust Control in Bending and Torsional Coupled Vibrations of a Flexible Robot Arm Kohei Takamura, Kousuke Yamamoto, Hiromiti Kawabe, Shirley J. Dyke, Toru Watanabe, Kazuto Seto DETC2003/VIB-48511
ASME Biennial 2003 Nonlinear Averaging of Multi-Sensor Data Sugathevan Suranthiran, Suhada Jayasuriya DETC2003/VIB-48512
ASME Biennial 2003 Digital Optimal Vibration Control of a Flexible Structure Containing Piezoelectric Elements Gustavo L. C. M. de Abreu, Jose F. Ribeiro, Valder Steffen, Jr. DETC2003/VIB-48514
ASME Biennial 2003 Implementation of a Genetically Optimized Interpolative Fuzzy Inference Engine in Controlling a Ball-Plate Laboratory Setup Caro Lucas, Alireza Fatehi, Danial Shahmirzadi, Mohsen M. Takami DETC2003/VIB-48515
ASME Biennial 2003 HOPF Bifurcation in a Disk-Shaped NEMS Maxim Zalalutdinov, Jeevak Parpia, Keith Aubin, Harold Craighead, Tuncay Alan, Alan Zehnder, Richard Rand DETC2003/VIB-48516
ASME Biennial 2003 A Nonlinear Reduced-Order Model for Electrostatic MEMS Eihab M. Abdel-Rahman, M. I. Younis, Ali H. Nayfeh DETC2003/VIB-48517
ASME Biennial 2003 Pull-In Dynamics of an Elastic Beam Actuated by Distributed Electrostatic Force Slava Krylov, Ronen Maimon DETC2003/VIB-48518
ASME Biennial 2003 Bifurcations and Chaotic Dynamics in an Electrostatically Actuated Impact Microactuator: A Numerical Exploration Xiaopeng Zhao, Chevva Konda Reddy, Ali H. Nayfeh DETC2003/VIB-48519
ASME Biennial 2003 Nonlinear Oscillations of Microelectromechanical Resonators He Li, B. Balachandran DETC2003/VIB-48520
ASME Biennial 2003 Mechanically Biased Nano-Resonators for Signal Transduction Robert H. Blick, Andreas Hoerner, Florian W. Beil, Werner Wegscheider DETC2003/VIB-48521
ASME Biennial 2003 Dynamics and Touchdown in Electrostatic MEMS Gilberto Flores, Gema A. Mercado, John A. Pelesko DETC2003/VIB-48522
ASME Biennial 2003 Nonlinear Vibrations in Contact Atomic Force Microscopy Joseph A. Turner DETC2003/VIB-48524
ASME Biennial 2003 Hysteresis Effect in Adhesive Elastic Contact Zheng Wei, Ya-Pu Zhao DETC2003/VIB-48525
ASME Biennial 2003 A Generalized Model of Electrically Actuated, Microbeam-Based MEMS Devices Eihab M. Abdel-Rahman, Samir A. Emam, Ali H. Nayfeh DETC2003/VIB-48526
ASME Biennial 2003 Recovery of Preload in Bolted Joint Using Shape Memory Alloy Elements Mehrdaad Ghorashi, Daniel J. Inman DETC2003/VIB-48527
ASME Biennial 2003 Dynamic Finite Element Analysis of a Piezoelectric Bimorph Beam Deflector With Consideration of Hysteresis Effect Paul C. P. Chao, C. W. Chiu, J. S. Huang, H. C. Tseng DETC2003/VIB-48528
ASME Biennial 2003 Dynamic Response Optimization of Asymmetrically Configured Piezoelectric Fans Sudipta Basak, Arvind Raman DETC2003/VIB-48529
ASME Biennial 2003 A Reduced-Order Model for Electrically Actuated Clamped Circular Plates Gregory W. Vogl, Ali H. Nayfeh DETC2003/VIB-48530
ASME Biennial 2003 Mechanical Behavior of an Electrostatically Actuated Microplate Xiaopeng Zhao, Eihab M. Abdel-Rahman, Ali H. Nayfeh DETC2003/VIB-48531
ASME Biennial 2003 Passive Vibration Control Through Nonlinear Energy Pumping Alexander F. Vakakis, D. Michael McFarland, Lawrence Bergman, Leonid Manevitch, Oleg Gendelman DETC2003/VIB-48532
ASME Biennial 2003 Passive Nonlinear Energy Pumping in Coupled Oscillators: Steady State Results Xiaoai Jiang, D. Michael McFarland, Lawrence A. Bergman, Alexander F. Vakakis DETC2003/VIB-48533
ASME Biennial 2003 Damping of Flexural Vibration by Low-Density Foams and Granular Materials Kripa K. Varanasi, Samir A. Nayfeh DETC2003/VIB-48534
ASME Biennial 2003 Particle Damping for Passive Vibration Suppression: Numerical Modeling With Experimental Verification Zhiwei Xu, Michael Yu Wang, Tianning Chen DETC2003/VIB-48535
ASME Biennial 2003 Damping and Vibration Control via Nanoscale Technologies for Defense Oriented Applications Gary L. Anderson, Devendra P. Garg DETC2003/VIB-48536
ASME Biennial 2003 Damping Characteristics of Carbon Nanotube Based Composites X. Zhou, E. Shin, K. W. Wang, C. E. Bakis DETC2003/VIB-48537
ASME Biennial 2003 Passive Control of Tire Vibration With a Dry Polymer Additive: Experiments and Analysis J. E. Frank, G. H. Koopmann, W. Chen DETC2003/VIB-48538
ASME Biennial 2003 Characterization, Modeling and Vibration Control of a Flexible Rubber Beam With Embedded Piezoelectric Actuators and Sensors Matthew L. Grier, Nader Jalili DETC2003/VIB-48539
ASME Biennial 2003 Active Vibration Control of Meso- and Microstructures via Piezoelectric Films Yi-Chu Hsu, Chia-Che Wu, G. Z. Cao, I. Y. Shen DETC2003/VIB-48540
ASME Biennial 2003 Shunt Tuning of a Piezoelectric Cantilever Beam Resonator Muturi G. Muriuki, William W. Clark DETC2003/VIB-48541
ASME Biennial 2003 Design and Control of Active Magnetic Bearing System With Lorentz Force Type Axial Actuator Ha-Yong Kim, Chong-Won Lee DETC2003/VIB-48542
ASME Biennial 2003 High-Performance Micro-Electrohydrodynamic Pump Actuator Kazim M. Ali, Reza Kashani, Kevin Hallinan DETC2003/VIB-48543
ASME Biennial 2003 Dynamic Analysis of an Active Flexible Isolation System Kongjie Song, Lingling Sun, Yuguo Sun, Bing Zhang DETC2003/VIB-48544
ASME Biennial 2003 Multi-Harmonic Adaptive Vibration Control of AMB-Driveline Systems With Non-Constant Velocity Flexible Couplings Hans A. DeSmidt, K. W. Wang, Edward C. Smith DETC2003/VIB-48545
ASME Biennial 2003 Stabilization of Active Magnetic Bearing System Subject to Base Motion Hyun-Sik Kim, Ha-Yong Kim, Chong-Won Lee, Tae-Ha Kang DETC2003/VIB-48546
ASME Biennial 2003 Optimal Feedback Controls of Linear Systems With Time Delay Jie Sheng, Ozer Elbeyli, J. Q. Sun DETC2003/VIB-48547
ASME Biennial 2003 Active Feedback Control Systems of Floor Impulse Noise Sadao Akishita, Kei Ameyama, Atsushi Mitani DETC2003/VIB-48548
ASME Biennial 2003 A New Method Seeking Optimal Parameters and Locations for Bearings of Rotating Machinery Systems Zhichu Fang, Miao Wang DETC2003/VIB-48549
ASME Biennial 2003 The Multi-Degree-of-Freedom Tuned-Mass Damper for Suppression of Single-Mode Vibration Under Random and Harmonic Excitation, Lei Zuo, Samir A. Nayfeh DETC2003/VIB-48550
ASME Biennial 2003 Viscoelastic Rotational Vibration Absorber for Remote Sensing Applications Adam L. Webster, William H. Semke DETC2003/VIB-48551
ASME Biennial 2003 Mass Measurement System Using an Undamped Dynamic Vibration Absorber for Weightless Conditions Takeshi Mizuno, Shinsuke Sato DETC2003/VIB-48552
ASME Biennial 2003 Experimental Dynamic Analysis of Magneto-Rheological Tuned Vibration Absorbers Jeong-Hoi Koo, Mehdi Ahmadian, Mehdi Setareh, Thomas M. Murray DETC2003/VIB-48553
ASME Biennial 2003 Applications of the Sherman-Morrison Matrix Inversion Formula in Linear and Non-Linear Vibrations, Controls and Acoustics Mehmet Bulent Ozer, Thomas J. Royston DETC2003/VIB-48554
ASME Biennial 2003 Control Modeling of Flexible Wall Cavity Vibroacoustic Systems Reza Kashani DETC2003/VIB-48555
ASME Biennial 2003 Power Flow Analysis for Complicated System Lingling Sun, Kongjie Song DETC2003/VIB-48556
ASME Biennial 2003 Theoretical and Experimental Investigation of Fuzzy Logic Based Active Vibration Control of Beams Manu Sharma, S. P. Singh, B. L. Sachdeva DETC2003/VIB-48557
ASME Biennial 2003 Isolation and Vibration Transmission Reduction of Systems Mounted on a Flexible Structure Yanning Liu, Yanchu Xu, Bill Flynn DETC2003/VIB-48558
ASME Biennial 2003 A Ray-Tracing Approach to Simulation and Evaluation of a Real-Time Quarter Car Model With Semi-Active Suspension System Using Matlab Brendan J. Chan, Corina Sandu DETC2003/VIB-48559
ASME Biennial 2003 Energy Regenerative and Active Control Suspension Yohji Okada, Sang-Soo Kim, Keisuke Ozawa DETC2003/VIB-48560
ASME Biennial 2003 Realization of a Suspension With Negative Stiffness for High-Performance Vibration Isolation Systems Takeshi Mizuno, Takefumi Toumiya DETC2003/VIB-48561
ASME Biennial 2003 Study on Power Flow and H¡Ä Robust Control in Raft Hybrid Vibration Isolation System Weimin Mao, Yueyun Cao, Shijian Zhu DETC2003/VIB-48562
ASME Biennial 2003 2:2:1 Resonance in the Quasiperiodic Mathieu Equation Richard Rand, Kamar Guennoun, Mohamed Belhaq DETC2003/VIB-48563
ASME Biennial 2003 Positioning and Vibration Control of Time-Varying Vibration Systems by Means of Nonstationary Optimal Regulator Susumu Hara, Kenji Nakamura, Tatsuo Narikiyo DETC2003/VIB-48564
ASME Biennial 2003 Analysis of Solitary Waves in Arteries G. Nakhaie Jazar, M. Mahinfalah, M. Rastgaar Aagaah, F. Fahimi DETC2003/VIB-48565
ASME Biennial 2003 Effect of a Pothole on the Dynamics of an MDOF Vehicle Alexander V. Pesterev, Lawrence A. Bergman, Chin An Tan, Bingen Yang DETC2003/VIB-48566
ASME Biennial 2003 A New Perturbation Method for Oscillatory Systems Ronald E. Mickens DETC2003/VIB-48567
ASME Biennial 2003 Degenerate Cases in Using the Direct Method Rifat Sipahi, Nejat Olgac DETC2003/VIB-48568
ASME Biennial 2003 Galerkin Projections for Delay Differential Equations Pankaj Wahi, Anindya Chatterjee DETC2003/VIB-48570
ASME Biennial 2003 Sway Reduction on Container Cranes Using Delayed Feedback Controller: Simulations and Experiments Ziyad N. Masoud, Nader A. Nayfeh, Ali H. Nayfeh DETC2003/VIB-48571
ASME Biennial 2003 Global Attractors of High-Speed Milling: Analyses, Numerics and Experiments Gabor Stepan, Robert Szalai, Brian P. Mann, Philip V. Bayly, Tamas Insperger, Janez Gradisek, Edvard Govekar DETC2003/VIB-48572
ASME Biennial 2003 Influence of Honing Dynamic on Surface Formation Alexander M. Gouskov, Sergey A. Voronov, Eric A. Butcher, Subhash C. Sinha DETC2003/VIB-48573
ASME Biennial 2003 Stability Analysis of Parametrically Excited Systems With Time-Delay Eric A. Butcher, Haitao Ma, Ed Bueler, Victoria Averina, Zsolt Szabo DETC2003/VIB-48574
ASME Biennial 2003 Transient Response of a Viscoelastic Axially Moving String With Power Constitutive Model Weijia Zhao, Li-Qun Chen DETC2003/VIB-48575
ASME Biennial 2003 Mode-Coupled Regenerative Machine Tool Vibrations Tamas Kalmar-Nagy, Francis C. Moon DETC2003/VIB-48576
ASME Biennial 2003 An Efficient Technique to Determine Susceptibility of Aircraft Brake to Judder at the Design Stage Todd Rook DETC2003/VIB-48577
ASME Biennial 2003 Links Between Disc Brake Squeal and Pad In-Plane Motion Fulun Yang, Valery Pilipchuk, Chin An Tan DETC2003/VIB-48578
ASME Biennial 2003 Non-Linear Dynamics of a Complex Aircraft Brake System: Experimental and Theoretical Approaches Jean-Jacques Sinou, Fabrice Thouverez, Olivier Dereure, Guy-Bernard Mazet DETC2003/VIB-48579
ASME Biennial 2003 Friction/Vibration Coupling Due to Viscoelastic Interaction of Rough Surfaces of Two Disks in Frictional Contact Kambiz Farhang, Aik-Liang Lim DETC2003/VIB-48580
ASME Biennial 2003 An Improved Noise Path Synthesis Technique for Systems With Nonlinear Joints Todd Rook DETC2003/VIB-48581
ASME Biennial 2003 Characterization and Reconstruction of Crack Forces for a Cracked de Laval Rotor Based on State Space Theory Alfayo A. Alugongo, Chen Jin DETC2003/VIB-48582
ASME Biennial 2003 Modeling and Free Vibration of Flex Circuits in Hard Disk Drives Jonathan Wickert DETC2003/VIB-48583
ASME Biennial 2003 Dynamic Analysis of a Nonlinear Torsional Flexible Coupling With Elastic Links Shiyuan Wu, Charles W. Bert DETC2003/VIB-48584
ASME Biennial 2003 Nonlinear Dynamics of Single-Cylinder Flexible Reciprocating Engines I. Goudas, I. Stavrakis, S. Natsiavas DETC2003/VIB-48585
ASME Biennial 2003 Method of Complex Amplitudes: Harmonically Excited Oscillator With Strong Cubic Nonlinearity O. V. Gendelman, L. I. Manevitch DETC2003/VIB-48586
ASME Biennial 2003 Steady-State Dynamics of Smooth and Non-Smooth Systems With Strong Nonlinearities Xiaoai Jiang, Alexander F. Vakakis DETC2003/VIB-48587
ASME Biennial 2003 Motion Confinement in a Linear Chain of Coupled Oscillators With a Strongly Nonlinear End Attachment Leonid Manevitch, Oleg Gendelman, Andrey I. Musienko, Alexander F. Vakakis, Lawrence Bergman DETC2003/VIB-48588
ASME Biennial 2003 Vibration Isolation and Chaotic Vibration Rong-Jun Jiang, Shi-Jian Zhu DETC2003/VIB-48589
ASME Biennial 2003 Nonlinear Dynamics of One-Way Clutches in Belt-Pulley Systems Farong Zhu, Robert G. Parker DETC2003/VIB-48590
ASME Biennial 2003 Matching Solutions Based on Small and Large ¥ä Approaches Igor V. Andrianov, Jan Awrejcewicz DETC2003/VIB-48591
ASME Biennial 2003 Computation of Normal Forms for High Dimensional Nonlinear Systems and Application to Nonplanar Motions of a Cantilever Beam Wei Zhang, Feng-Xia Wang, Jean W. Zu DETC2003/VIB-48592
ASME Biennial 2003 Dynamics of Two Van Der Pol Oscillators Coupled via a Bath Erika Camacho, Richard Rand, Howard Howland DETC2003/VIB-48593
ASME Biennial 2003 Domains of Attraction for an Autoparametric Mass-Pendulum System: A Lyapunov Exponent Map Approach Khalid El-Rifai, George Haller, Anil K. Bajaj DETC2003/VIB-48594
ASME Biennial 2003 Reconstructing the Phase Space With Fractional Derivatives B. F. Feeny, G. Lin, T. Das DETC2003/VIB-48595
ASME Biennial 2003 Effect of Feedback Control on the Bifurcation Stability of a Nonlinear Servohydraulic System: An Experimental Investigation Amit Shukla, David F. Thompson, Srinivas Kowta DETC2003/VIB-48596
ASME Biennial 2003 Flexural-Torsional Post Critical Behavior of a Cantilever Beam Dynamically Excited: Theoretical Model and Experimental Tests Daniele Zulli, Rocco Alaggio, Francesco Benedettini DETC2003/VIB-48597
ASME Biennial 2003 Measurement of Large Harmonic Vibration Amplitudes Almantas Mozuras, Evgueni Podzharov DETC2003/VIB-48598
ASME Biennial 2003 Displacement Measurement, Nonlinearity, Noise, and Thermal Stability Almantas Mozuras, Evgueni Podzharov DETC2003/VIB-48599
ASME Biennial 2003 Nonlinear Dynamics of a Pipe Conveying Pulsatile Flow: Effect of an Asymmetric Spring Supported End Kiyotaka Yamashita, Masatsugu Yoshizawa, Jun Agata, Arata Motoki DETC2003/VIB-48600
ASME Biennial 2003 Nonlinear Vibration of Sheet Metal Plates Under Interacting Parametric and External Excitation During Manufacturing Chung Hwan Kim, Chong-Won Lee, N. C. Perkins DETC2003/VIB-48601
ASME Biennial 2003 Nonlinear Response of a Buckled Beam to a Three-to-One Internal Resonance Samir A. Emam, Ali H. Nayfeh DETC2003/VIB-48602
ASME Biennial 2003 Modal Interactions in a Thermally Loaded Annular Plate Haider N. Arafat, Ali H. Nayfeh DETC2003/VIB-48603
ASME Biennial 2003 Nonlinear Oscillations of a Particle in the Plane Under Longitudinal End Excitation Rajesh K. Jha, Robert G. Parker DETC2003/VIB-48604
ASME Biennial 2003 An Experimental Study of Parametrically Excited Cantilever Beam and System Identification of Nonlinear Modes Timothy A. Doughty, Patricia Davies, Anil Bajaj DETC2003/VIB-48605
ASME Biennial 2003 Optoelectronic Vibration Measurement System Vladimir L. Simonov DETC2003/VIB-48608
ASME Biennial 2003 Application of Taguchi Method to Identify Damage in Cantilever Beam Kye-Si Kwon, Rong-Ming Lin DETC2003/VIB-48610
ASME Biennial 2003 Experiments on Linear and Nonlinear Control of a Multi-DOF Parallel Mechanism Sandor Riebe, Heinz Ulbrich DETC2003/VIB-48612
ASME Biennial 2003 Metric Damping of MDOF Systems in High Transient Motion A. Al Majid, A. Allezy, R. Dufour DETC2003/VIB-48613
ASME Biennial 2003 Hydropneumatic Suspension Design Mauricio Baldi, Pable Siqueira Meirelles DETC2003/VIB-48614
ASME Biennial 2003 An Experimental Investigation of the Parametric Resonance in a Buckled Beam Hiroshi Yabuno, Manami Ohkuma, Walter Lacarbonara DETC2003/VIB-48615
ASME Biennial 2003 Nonlinear Vibrations of an Inclined Cable A. Berlioz, C.-H. Lamarque DETC2003/VIB-48616
ASME Biennial 2003 Finding Unstable Fixed Points From Time Series Data Takaaki Maehara, Mikio Nakai DETC2003/VIB-48617
ASME Biennial 2003 Implementation of the Wideband Autoparametric Vibration Absorber on a Flexible Structure Ashwin Vyas, Anil K. Bajaj, Arvind Raman DETC2003/VIB-48618
ASME Biennial 2003 A Plethora of Nonlinear Dynamics Phenomena Observed in a Simple Cantilever Plate Pramod Malatkar, Ali H. Nayfeh DETC2003/VIB-48619
ASME Biennial 2003 Assured Stability of Drillstrings Equipped With Polycrystalline Diamond Compact (PDC) Bits M. A. Elsayed DETC2003/VIB-48620
ASME Biennial 2003 Experimental Studies on Artificial Vibration Oil Production Ren-yuan Sun DETC2003/VIB-48621
ASME Biennial 2003 Modal Characterization of Turbomachinery Bladed Disks by Optical Measurements J.-P. Lombard, E. Seinturier, J.-L. Raynaud DETC2003/VIB-48622
ASME Biennial 2003 Rotordynamics Analysis: Experimental and Numerical Investigations Jean-Jacques Sinou, David Demally, Cristiano Villa, Fabrice Thouverez, Michel Massenzio, Franck Laurant DETC2003/VIB-48623
ASME Biennial 2003 Experimental and Numerical Study of a New Percussive Drilling Model With a Drift Luiz Fernando P. Franca, Hans Ingo Weber DETC2003/VIB-48624
ASME Biennial 2003 Identification Method for Both Linear and Piecewise Linear Dynamical Systems S. Coutel, C. H. Lamarque, S. Pernot DETC2003/VIB-48625
ASME Biennial 2003 Experimental Validation of a Non-Linear Model Under Non-Ideal Excitation R. M. L. R. F. Brasil, F. J. Garzeri, J. M. Balthazar DETC2003/VIB-48627
ASME Biennial 2003 Stick-Slip Chaos in a Non-Ideal Self-Excited System B. R. Pontes, J. M. Balthazar, V. A. Oliveira DETC2003/VIB-48628
ASME Biennial 2003 Active Bearing of Rotors Utilizing Robust Controlled Piezo Actuators A. Alizadeh, C. Ehmann, U. Schonhoff, R. Nordmann DETC2003/VIB-48850
ASME Biennial 2003 Dynamic Behavior of a Revolute Clearance Joint in Multibody Mechanical Systems P. Flores, H. M. Lankarani, J. Ambrosio, J. C. P. Claro DETC2003/VIB-48853
ASME Biennial 2003 Modeling Lubricated Revolute Clearance Joints in Multibody Mechanical Systems P. Flores, H. M. Lankarani, J. Ambrosio, J. C. P. Claro DETC2003/VIB-48854
ASME Biennial 2005 Modal Reduction of Mathematical Models of Biological Molecules Aiqin Li, Earl H. Dowell, Duke University, Durham, NC, United States DETC2005-84056 System Identification and Reduced Order Modeling With Applications to Linear and Nonlinear Systems
ASME Biennial 2005 Long Term Ride Dynamics of Large Order Vehicle Models with Nonlinear Suspension Prodromos Metallidis, Ioannis Stavrakis, George Verros,Sotirios Natsiavas, Aristotle University, Thessaloniki, Greece DETC2005-85178 System Identification and Reduced Order Modeling With Applications to Linear and Nonlinear Systems
ASME Biennial 2005 Jump Avoidance Conditions for Piecewise Linear Vibration Isolator Sagar Deshpande, Sudhir Mehta, Reza Jazar, North Dakota State University, Fargo, ND, United States DETC2005-85396 System Identification and Reduced Order Modeling With Applications to Linear and Nonlinear Systems
ASME Biennial 2005 A New Method for Vibration Mode Analysis David Chelidze, Wenliang Zhou, University of Rhode Island, Kingston, RI, United States DETC2005-85138 System Identification and Reduced Order Modeling With Applications to Linear and Nonlinear Systems
ASME Biennial 2005 Modal Parameter Identification of Time- Varying Systems Using the Time-Varying Multivariate Autoregressive Model Lilan Liu, Hongzhao Liu, Ziying Wu, Daning Yuan, Pengfei Li, Xi’an University of Technology, Xi’an, ShaanXi, China DETC2005-84118 System Identification and Reduced Order Modeling With Applications to Linear and Nonlinear Systems
ASME Biennial 2005 Force Product Criteria of Sliding Motion in a Forced Oscillator including Dry Friction Albert Luo, Brandon C. Gegg, Sothern Illinois University Edwardsville, Edwardsville, IL, United States DETC2005-84147 Friction Induced Vibration and Noise
ASME Biennial 2005 Analytical investigation of Hopf Bifurcations Occurring in a 1DOF Sliding-Friction Oscillator with Application to Disc-Brake Vibrations Hartmut Hetzler, Daniel Schwarzer, Wolfgang Seemann, Universitaet Karlsruhe (TH), Karlsruhe, Germany DETC2005-84312 Friction Induced Vibration and Noise
ASME Biennial 2005 Vibration Analysis of a Brake Mechanism: Modeling, Simulation and Experimental Results Mihaela Dupac, P. K. Raju, Auburn University, Auburn, AL, United States DETC2005-84953 Friction Induced Vibration and Noise
ASME Biennial 2005 Estimation of Critical Value of Friction Coefficient for Brake Squeal Analysis Jinchun Huang, Charles Krousgrill, Anil Bajaj, Purdue University, West Lafayette, IN, United States DETC2005-85373 Friction Induced Vibration and Noise
ASME Biennial 2005 Frequency Locking in a Forced Mathieuvan der Pol System Manoj Pandey, Richard Rand, Alan Zehnder, Cornell University, Ithaca, NY, United States DETC2005-84018 Nonlinear Dynamics, Optimization and Reliability of Mechanical Systems
ASME Biennial 2005 The Different Effects of Damping on Dynamic Instability Veturia Chiroiu, Institute of Solid Mechanics, Romanian Academy, Bucharest, Romania, Stefania Donescu, Technical University of Civil Engineering, Bucharest, Romania, Ligia Munteanu, Institute of Solid Mechanics, Romanian Academy, Bucharest, Romania DETC2005-84050 Nonlinear Dynamics, Optimization and Reliability of Mechanical Systems
ASME Biennial 2005 Robust Design Analysis and Modeling of an Escalator for Vibration Reduction Yisug Kwon, George S. Copeland, Randy Roberts, OTIS Elevator - Worldwide Engineering, Farmington, CT, United States, DETC2005-84169 Nonlinear Dynamics, Optimization and Reliability of Mechanical Systems
ASME Biennial 2005 Chaos in the Quasiperiodically Forced Helmholtz-Duffing Oscillator with Two-Well Potential Jingjun Lou, Shijian Zhu, Qiwei He, Naval University of Engineering, Wuhan, Hubei, China DETC2005-84187 Nonlinear Dynamics, Optimization and Reliability of Mechanical Systems
ASME Biennial 2005 A Novel Vibration Analysis of Stiff-Soft Structural Systems by the Method of Spectral Proper Orthogonal Decomposition Ioannis T. Georgiou, National Technical University of Athens, Zografos, Athens, Greece, Christos I. Papadopoulos, National Technical University of Athens, Dept of Naval Architecture & Marine Engineering, Zografos, Athens, Greece DETC2005-85296 Vibration of Complex Structures I
ASME Biennial 2005 Vibration Localization in Near-Periodic Coupled Two-Dimensional Resonator Arrays John A. Judge, The Catholic University of America, Washington, DC, United States, Joseph F. Vignola, Brian H. Houston, Douglas M. Photiadis, Martin H. Marcus, The Naval Research Laboratory, Washington, DC, United States DETC2005-84855 Vibration of Complex Structures I
ASME Biennial 2005 Propagation Properties of Three-Coupled Periodic Mechanical Systems Francesco Romeo, Achille Paolone, Università di Roma ‘La Sapienza’, Rome, Italy DETC2005-85617 Vibration of Complex Structures I
ASME Biennial 2005 Modal Synthesis Method for Poroelastic Fluid-Structure Coupled Problems Including Structural Damping Pascal Penning, Veronique Kehr-Candille, ONERA Structural Dynamics and Coupled Systems Department, Chatillon, France, Roger Ohayon, Conservatoire National des Arts et Metiers (CNAM), Paris, France DETC2005-85327 Vibration of Complex Structures I
ASME Biennial 2005 Modal Reduction Method for Vibrational Analysis of Structures Partially Filled with Internal Liquids Jean-Sebastien Schotte, ONERA, Chatillon, France, Roger Ohayon, Conservatoire National des Arts et Metiers (CNAM), Paris, France DETC2005-85203 Vibration of Complex Structures I
ASME Biennial 2005 Passive Balancing for Rotor Systems Using Pendulum Balancers George Flowers, Roland Horvath, Auburn University, Auburn, AL, United States, Jerry Fausz, Air Force Research Laboratory, Kirtland AFB, NM, United States DETC2005-84194 Balancing and Rotor Elements
ASME Biennial 2005 An Off-Resonance Synchronous Vibration Based Method for Rotor System Damage Detections Huageng Luo, GE Global Research Center, Niskayuna, NY, United States, Hector Rodriguez, GE Energy, Greenville, SC, United States, Darren L. Hallmna, GE Global Research, Niskayuna, NY, United States, Dennis Corbly, GE Transportations, Cincinnati, OH, United States DETC2005-84197 Balancing and Rotor Elements
ASME Biennial 2005 Effects of Nonlinear Damping Washers on the Automatic Ball Balancer for Optical Disk Drives Paul C. P. Chao, Chung-Yuan Christian University, Chung-Li, Taiwan, China, Cheng-Kuo Sung, Ben-Cheng Yo, National Tsing-Hua University, Hsinchu, Taiwan, China DETC2005-84563 Balancing and Rotor Elements
ASME Biennial 2005 Dynamic Pressure Data Acquisition via Strain Gage Measurements Gyorgy Szasz, Karen K. Fujikawa, Raju Ananth, Structural Integrity Associates, Inc., Centennial, CO, United States DETC2005-85729 Balancing and Rotor Elements
ASME Biennial 2005 Torsion Vibration Analysis of a Cardan Shaft Driven by a Permanent Magnet Electric Motor Jussi Sopanen, Lasse Laurila, Markus Hirvonen, Lappeenranta University of Technology, Lappeenranta, Finland DETC2005-84825 Balancing and Rotor Elements
ASME Biennial 2005 Natural Frequencies of a Cantilever Beam Under Longitudinal Rotation of the Support Mehdi Esmaeili, Mohammad Durali, Sharif University of Technology, Tehran, Iran, Nader Jalili, Clemson University, Clemson, SC, United States DETC2005-84830 Vibration Analysis of Distributed Systems
ASME Biennial 2005 Cantilever Beam Microgyroscope Modeling and Performance Evaluation Mehdi Esmaeili, Mohammad Durali, Sharif University of Technology, Tehran, Iran, Nader Jalili, Clemson University, Clemson, SC, United States DETC2005-84826 Vibration Analysis of Distributed Systems
ASME Biennial 2005 Modeling and Simulation of an Elastic Ship-Mounted Crane Yousef Al-Sweiti, Dirk Soeffker, University Duisburg-Essen, Duisburg, Germany DETC2005-84580 Vibration Analysis of Distributed Systems
ASME Biennial 2005 Transition of Neural Signals on Cylindrical Shells with Various Curvatures J.G. DeHaven, H. S. Tzou, Younghee Han, University of Kentucky, Lexington, KY, United States DETC2005-85153 Vibration Analysis of Distributed Systems
ASME Biennial 2005 Vibration of Beams with Unconventional Boundary Conditions Using Artificial Neural Network Pezhman Hassanpour Asl, University of Toronto, Toronto, ON, Canada, Hamid Mehdigholi, Sharif University of Technology, Tehran, Iran, Ebrahim Esmailzadeh, University of Ontario Inst. of Tech., Oshawa, ON, Canada DETC2005-84948 Vibration Analysis of Distributed Systems
ASME Biennial 2005 Minimax Design of Statistics-Based Control with Noise Uncertainty for Highway Bridges Khanh Pham, Air Force Research Laboratory, Kirtland AFB, NM, United States DETC2005-84593 Active Control of Vibration and Acoustics I
ASME Biennial 2005 Nonlinear Control of Hybrid Electrostrictive/ Peizoelectic Polymeric Structures: Theory and Experiment H. S. Tzou, W. K. Chai, University of Kentucky, Lexington, KY, United States DETC2005-85596 Active Control of Vibration and Acoustics I
ASME Biennial 2005 Multi Mode Vibration Control and Broader Band Motion Control of Three Dimensional Shaking Table Tsunehiro Wakasugi, Toru Watanabe, Kazuto Seto, Nihon University, Tokyo, Japan DETC2005-85184 Active Control of Vibration and Acoustics I
ASME Biennial 2005 Adaptive Fuzzy Logic Control of a Flexible Four-Bar Mechanism With a Smart Coupler Link Ahmad Smaili, Foaud Mrad, Hadi Maamoun, American University of Beirut, Beirut, Lebanon DETC2005-85298 Active Control of Vibration and Acoustics I
ASME Biennial 2005 Irreversible Passive Energy Transfer in the Damped Response of Coupled Oscillators with Essential Nonlinearity Gaetan Kerschen, University of Liege, Liege, Belgium, Young Lee, Alexander Vakakis, National Technical University of Athens, Athens, Greece, D. Michael McFarland, Lawrence A. Bergman, University of Illinois at Urbana-Champaign, Urbana, IL, United States DETC2005-84498 System Identification and Reduced Order Modeling With Applications to Linear and Nonlinear Systems
ASME Biennial 2005 Reduced Order Modelling in Nonlinear Mechanical Oscillators with Energy Pumping Xianghong Ma, School of Eng. and Applied Science, Birmingham, United Kingdom, Alexander Vakakis, National Technical University of Athens, Athens, Greece, Lawrence A. Bergman, University of Illinois, Urbana, IL, United States DETC2005-85214 System Identification and Reduced Order Modeling With Applications to Linear and Nonlinear Systems
ASME Biennial 2005 Passage through Resonance in a Three Degree-of-Freedom Vibration Isolation System Ryo Kawana, Tetsuro Tokoyoda, Kazushige Satou, Masatsugu Yoshizawa, Toshihiko Sugiura, Keio University, Yokohama, Japan DETC2005-85171 System Identification and Reduced Order Modeling With Applications to Linear and Nonlinear Systems
ASME Biennial 2005 Nonlinear Energy Pumping with Strongly Nonlinear Coupling: Identification of Resonance Captures in Numerical and Experimental Results Emmanuel Gourdon, ENTPE (LGM), Vaulx en Velin Cedex, France, Simon Coutel, LGM-EGCB ENTPE, Vaulx en Velin Cedex, France, C. H. Lamarque, Stephans Pernot, LGMDGCB- ENTPE, Vaulx en Velin Cedex, France DETC2005-84233 System Identification and Reduced Order Modeling With Applications to Linear and Nonlinear Systems
ASME Biennial 2005 Break Squeal Noise due to Disk Misalignment Yeon-Sun Choi, Ju-Pyo Park, Sungkyunkwan University, Suwon, Korea (Republic) DETC2005-84113 Friction Induced Vibration and Noise
ASME Biennial 2005 Frequency Response Analysis of Piecewise Nonlinear Vibration Isolator Patrick Stahl, Bobcat, Fargo, ND, United States, Reza Jazar, North Dakota State University, Fargo, ND, United States DETC2005-84879 Friction Induced Vibration and Noise
ASME Biennial 2005 A Parametric Study on the Friction- Induced Vibration of a Brake Model During Decelerated Sliding Chin An Tan, Jinsha Li, Wayne State University, Detroit, MI, United States DETC2005-85361 Friction Induced Vibration and Noise
ASME Biennial 2005 Stiffness Calculation and Dynamic Simulation of Air Spring Xu Wei, He Lin, Shuai Chang-geng, Ye Zhen-xia, Naval University of Engineering, Wuhan, Hubei, China DETC2005-84338 Nonlinear Dynamics, Optimization and Reliability of Mechanical Systems
ASME Biennial 2005 Suppression of Internal Resonances of Rubber Isolators Using Dynamic Vibration Absorbers Yu Du, Adaptive Technologies Inc., Blacksburg, VA, United States, Efstratios Nikolaidis, The University of Toledo, Toledo, OH, United States, Ricardo A. Burdisso, Virginia Tech., Blacksburg, VA, United States DETC2005-84566 Nonlinear Dynamics, Optimization and Reliability of Mechanical Systems
ASME Biennial 2005 An Accurate Solution for the Numerical Integral Method of Non-Linear Dynamic Systems Yongqiang Li, Jie Liu, Northeastern University, Shenyang, China DETC2005-84772 Nonlinear Dynamics, Optimization and Reliability of Mechanical Systems
ASME Biennial 2005 Stabilizing Effects of Speed Fluctuations on the Dynamic Responce of Rolling Element Bearings with Radial Clearances Anastasios Lioulios, Ioannis Antoniadis, National Technical University of Athens, Athens, Greece DETC2005-84983 Nonlinear Dynamics, Optimization and Reliability of Mechanical Systems
ASME Biennial 2005 A Bayesian Identification Methodology for Selection among Pareto-Optimal Structural Models Using Modal Residuals Kostas Christodoulou, C. Papadimitriou, University of Thessaly, Volos, Magnesia, Greece DETC2005-85300 Nonlinear Dynamics, Optimization and Reliability of Mechanical Systems
ASME Biennial 2005 Surprisingly Complicated Dynamics of a Single-Degree-of-Freedom Linear Oscillator Coupled to a Nonlinear Attachment Young Lee, University of Illinois at Urbana-Champaign, Urbana, IL, United States, Gaetan Kerschen, University of Liege, Liege, Belgium, Alexander Vakakis, Panagiotis Panagopoulos, National Technical University of Athens, Athens, Greece, Lawrence A. Bergman, University of Illinois, Urbana, IL, United States, D. Michael McFarland, University of Illinois at Urbana-Champaign, Urbana, IL, United States DETC2005-84688 Vibration of Complex Structures II
ASME Biennial 2005 Order-Tuned Vibration Absorbers for Cyclic Rotating Flexible Structures Brian J. Olson, Steve Shaw, Michigan State University, East Lansing, MI, United States, Christophe Pierre, McGill University, Montreal, Quebec, Canada DETC2005-84641 Vibration of Complex Structures II
ASME Biennial 2005 Rotating Mistuned Bladed Disk Assembly Dynamic Response Prediction Using Component Mode Synthesis Methods with Interface Modes Francois Duvauchelle, Duc-Minh Tran, ONERA (Office National d’Etudes et de Recherches Aerospatiales), Chatillon, France, Roger Ohayon, Conservatoire National des Arts et Metiers (CNAM), Paris, France DETC2005-85216 Vibration of Complex Structures II
ASME Biennial 2005 Stability and Contact Analysis of a Flexible Bladed-Rotor Nicolas Lesaffre, Ecole Centrale de Lyon, Laboratoire LTDS, UMR CNRS 5513, Equipe D2S, Ecully, France, Jean-Jacques Sinou, Fabrice Thouverez, Ecole Centrale de Lyon, Ecully, France (Metro) DETC2005-84505 Vibration of Complex Structures II
ASME Biennial 2005 Aircraft Engine Structural Rotor-Stator Modal Interaction Mathias Legrand, Sebastien Roques, Ecole Centrale de Nantes, Nantes, France, Christophe Pierre, McGill University, Montreal, Quebec, Canada, Bernard Reseux, Ecole Centrale de Nantes, Nantes, Loire-Atlantique, France DETC2005-85251 Vibration of Complex Structures II
ASME Biennial 2005 Application of Vibration Analysis in Ball Bearing Fault Detection Firooz Bakhtiari-Nejad, Sina E. Yeganeh, Ali H. Nayeb, Amir Kabir University of Technology, Tehran, Tehran, Iran DETC2005-84544 Diagnosis and Crack Detection
ASME Biennial 2005 Dynamic Response of Rigid Rotors Supported on Rolling Element Bearings with an Outer Raceway Defect C. Nataraj, Robert Gerard Pietrusko, Villanova University, Villanova, PA, United States DETC2005-85646 Diagnosis and Crack Detection
ASME Biennial 2005 Detection of a Rotor Crack Based on the Nonlinear Vibration Diagnosis Using Periodic Excitation Yukio Ishida, Nagoya University, Nagoya, Chikusa-ku, Japan, Tsuyoshi Inoue, Nagoya University, Nagoya, Japan DETC2005-84718 Diagnosis and Crack Detection
ASME Biennial 2005 Crack Position and Depth Identification in Rotating Shafts – Part 2: Experimental Results Paolo Pennacchi, Politecnico di Milano, Milano, MI, Italy, Nicolo Bachschmid, Ezio Tanzi, Dipartimento di Meccanica - Politecnico di Milano, Milano, MI, Italy DETC2005-85447 Diagnosis and Crack Detection
ASME Biennial 2005 Crack Position and Depth Identification in Rotating Shafts – Part 1: Theoretical Model Paolo Pennacchi, Nicolo Bachschmid, Andrea Vania, Politecnico di Milano, Milano, MI, Italy DETC2005-85446 Diagnosis and Crack Detection
ASME Biennial 2005 Vibration Analysis and Health Monitoring of Cracks in Composite Disk Rotor Systems George Flowers, Hai Xin, Roland Horvath, Auburn University, Auburn, AL, United States, Jerry Fausz, Air Force Research Laboratory, Kirtland AFB, NM, United States DETC2005-85626 Diagnosis and Crack Detection
ASME Biennial 2005 Comparison of Exact and Approximate Frequency Response of a Piecewise Linear Vibration Isolator Reza Jazar, Mohammad Mahinfalah, Mohammad Rastgaar Aagaah, G. Nazari, North Dakota State University, Fargo, ND, United States DETC2005-84522 Vibration Control of Mechanical Systems
ASME Biennial 2005 Disturbance Attenuation Using Non-Singleton Fuzzy Logic Andras Simon, George Flowers, Auburn University, Auburn, AL, United States DETC2005-84433 Vibration Control of Mechanical Systems
ASME Biennial 2005 Nonlinear Dynamic Analysis and Chaotic Behavior in Atomic Force Microscopy Hossein Nejat Pishkenari, Sharif University of Technology, Tehran, Iran, Nader Jalili, Clemson University, Clemson, SC, United States, Aria Alasti, Sharif University of Technology, Tehran, Iran DETC2005-84822 Vibration Control of Mechanical Systems
ASME Biennial 2005 Passive Control of Vibration of Elastically Supported Beams Subjected to Moving Loads Davood Younesian, University of Ontario Institutes of Technology, Oshawa, ON, Canada, Mohammad H. Kargarnovin, Sharif University of Technology, Tehran, Iran, Ebrahim Esmailzadeh, University of Ontario Institutes of Technology, Oshawa, ON, Canada DETC2005-84940 Vibration Control of Mechanical Systems
ASME Biennial 2005 Inverse Dynamics-Based Fuzzy Logic Control of a Projectile Smart Fin Mohamed Trabia, Surya Parimi, Woosoon Yim, University of Nevada, Las Vegas, NV, United States DETC2005-84294 Vibration Control of Mechanical Systems
ASME Biennial 2005 On the Placement of Active Bars and Optimal Feedback Gain in Random Adaptive Structures for Vibration Suppression Fan Yang, Ramin Sedaghati, Concordia University, Montreal, ON, Canada, Davood Younesian, Ebrahim Esmailzadeh, University of Ontario Institute of Technology, Oshawa, ON, Canada DETC2005-85220 Vibration Control of Mechanical Systems
ASME Biennial 2005 Analytical Formulation and Damping Analysis of Beams with Enhanced Active Constrained Layer Treatments Under Various Boundary Conditions Jianxin Gao, Wei-Hsin Liao, The Chinese University of Hong Kong, Hong Kong, China DETC2005-84530 Semi-Active and Hybrid Control
ASME Biennial 2005 Variable Damping and Stiffness Vibration Control with Two Magnetorheological Fluid Dampers in Series Yanqing Liu, Hiroshi Matsuhisa, Hideo Utsuno, Jeong Gyu Park, Kyoto University, Kyoto, Japan DETC2005-84675 Semi-Active and Hybrid Control
ASME Biennial 2005 Performance Evaluation of Semi-Active Control with Magnetorheological Damper Shaopu Yang, Cunzhi Pan, Shijiazhuang Railway Institute, Shijiazhuang, Hebei, China, Shuqi Guo, Beijing Jiaotong University, Beijing, Hebei, China DETC2005-84500 Semi-Active and Hybrid Control
ASME Biennial 2005 Analysis on Harmonic Responses of Vehicle Suspension Systems With Megnetorheological Dampers Shuqi Guo, Beijing Jiaotong University, Beijing, Hebei, China, Shaopu Yang, Cunzhi Pan, Shijiazhuang Railway Institute, Shijiazhuang, Hebei, China DETC2005-84703 Semi-Active and Hybrid Control
ASME Biennial 2005 Parameter Identification of a Nonlinear Joint within a Noise Synthesis Framework Todd Rook, The Ohio State University, Tipp City, OH, United States DETC2005-85011 System Identification and Reduced Order Modeling With Applications to Linear and Nonlinear Systems
ASME Biennial 2005 An Iwan Model for Dissipation in Structural Systems with Frictional Joints Jason Miller, Dane Quinn, The University of Akron, Akron, OH, United States DETC2005-84985 System Identification and Reduced Order Modeling With Applications to Linear and Nonlinear Systems
ASME Biennial 2005 Problem of Uniqueness of Non-linear Joint Parameter Identification by Force-State Mapping without Knowing the Joint Model J. H.Wang, National Tsing Hua University, Hsing Chu, Taiwan, China, Hui Yuan Huang, National Tsing Hua University, Hsinchu, Taiwan, China DETC2005-84560 System Identification and Reduced Order Modeling With Applications to Linear and Nonlinear Systems
ASME Biennial 2005 Shear Lag Based IWAN Model for Interface Friction Contacts Dinar Deshmukh, Edward J. Berger, University of Virginia, Charlottesville, VA, United States DETC2005-85328 System Identification and Reduced Order Modeling With Applications to Linear and Nonlinear Systems
ASME Biennial 2005 Efficient Simulation of a Dynamic System with LuGre Friction Nguyen Do, Al Ferri, Georgia Institute of Technology, Atlanta, GA, United States, Olivier Bauchau DETC2005-85339 Nonlinear Dynamics, Optimization and Reliability of Mechanical Systems
ASME Biennial 2005 An Enrichment Scheme for Polynomial Chaos Expansion Applied to Random Eigenvalue Problem Debraj Ghosh, The Johns Hopkins University, Baltimore, MD, United States, Roger Ghanem, University of Southern California, Los Angeles, CA, United States DETC2005-85450 Nonlinear Dynamics, Optimization and Reliability of Mechanical Systems
ASME Biennial 2005 Nonlinear Thermal Vibration Analysis of a Thin Laminated Microstructure Xiaoling He, University of Wisconsin, Milwaukee, WI, United States DETC2005-85326 Nonlinear Dynamics, Optimization and Reliability of Mechanical Systems
ASME Biennial 2005 Steady-State Dynamic Response of Preisach Hysteretic Systems Pol Spanos, Antonios Kontsos, Rice University, Houston, TX, United States, P. Cacciola, University of Messina, Messina, Italy DETC2005-85552 Nonlinear Dynamics, Optimization and Reliability of Mechanical Systems
ASME Biennial 2005 Sensitivity Analysis for the Transverse Displacements of a Cracked Plate Using the Spatial Wavelet Approach Hy Sun, Yiu Yin Lee, Heung-fai Lam, City University of Hong Kong, Hong Kong, China, R. K. L. Su, Hong Kong University, Hong Kong, China DETC2005-85778 Nonlinear Dynamics, Optimization and Reliability of Mechanical Systems
ASME Biennial 2005 Some Observations of Mode Localizations in Flexibly Coupled Two Rotors Yohta Kunitoh, Hiroshi Yabuno, University of Tsukuba, Tsukuba- shi, Ibaraki, Japan, Tsuyoshi Inoue, Nagoya University, Nagoya, Japan, Yukio Ishida, Nagoya University, Nagoya, Chikusa-ku, Japan DETC2005-84557 Nonlinear Dynamics
ASME Biennial 2005 Vibration Suppression of Rotating Machinery Utilizing Discontinuous Spring Characteristics Jun Liu, Yukio Ishida, Nagoya Unviersity, Nagoya, Japan DETC2005-84054 Nonlinear Dynamics
ASME Biennial 2005 Modeling and Analysis of Friction Rim Dampers for Blisks Denis Laxalde, Jean-Jacques Sinou, Fabrice Thouverez, Ecole Centrale de Lyon, Ecully Cedex, France (Metro), Jean- Pierre Lombard, Snecma, Moissy-Cramayel, France (Metro) DETC2005-84417 Nonlinear Dynamics
ASME Biennial 2005 The Influence of Internal Damping on the Rotor Dynamic Stability of a Flywheel Rotor with Flexible Hub George Flowers, Alfonso Moreira, Auburn University, Auburn, AL, United States, Mark Balas, University of Wyoming, Laramie, WY, United States, Alex Matras, University of Colorado, Boulder, CO, United States, Jerry Fausz, Air Force Research Laboratory, Kirtland AFB, NM, United States DETC2005-84195 Nonlinear Dynamics
ASME Biennial 2005 Thermal Effects on the Natural Frequency of Nonlinear, Co-Rotating Disks Albert Luo, Southern Illinois Unviersity Edwardsville, Edwardsville, IL, United States, Nader Saniei, Loyola Marymount University, LOs Angeles, CA, United States, William R. Harp, North Carolina State University, Raleigh, NC, United States DETC2005-84143 Flow Induced Vibration
ASME Biennial 2005 Flow Induced Vibration of an Axisymmetric Flow between Two Parallel Disks Grant Warner, Northeastern University, Boston, MA, United States, Hamid Nayeb-Hashemi, Northeastern University, Dept. of Mechanical Eng, Boston, MA, United States, M. Olia, Wentworth Institute of Technology, Boston, MA, United States DETC2005-84854 Flow Induced Vibration
ASME Biennial 2005 Natural Frequency Analysis of Liquid- Filled Tanks Rouzbeh Amini, Grant Warner, Northeastern University, Boston, MA, United States, Hamid Nayeb-Hashemi, Northeastern University, Dept. of Mechanical Eng, Boston, MA, United States DETC2005-84856 Flow Induced Vibration
ASME Biennial 2005 Comparative Performance Study of Jatropha Methyl Ester as Diesel Oil Substitute on Di-diesel Engine with Emphasis on Vibration and Noise as Potential Engine Parameters Niranjan Kumar Injeti, Chandraprasad Sunkara, Andhra University, Visakhapatnam, India, Ravi Kiran Sastry G, Maharaja Engineering College, Vijayanagaram, India, Appa Rao Basava, Andhra University, Visakhapatnam, India DETC2005-84136 Flow Induced Vibration
ASME Biennial 2005 Applications of Acoustic Rhinometry in the Modeling of Living Human Nasal Cavity Based on CT Scan Yingxi Liu, Jun Zhang, Dalian University of Technology, Dalian, Liaoning, China, Xiuzhen Sun, Dalian Medical University, Dalian, Liaoning, China DETC2005-84189 Vibrations and Acoustics in Bio-mechanical Systems
ASME Biennial 2005 Acoustic Noise Reduction Liner for a 4T MRI Scanner Chris K. Mechefske, Queen’s University, Kingston, ON, Canada DETC2005-84245 Vibrations and Acoustics in Bio-mechanical Systems
ASME Biennial 2005 MRI Scanner Vibration and Acoustic Noise Chris K. Mechefske, Queen’s University, Kingston, ON, Canada DETC2005-84246 Vibrations and Acoustics in Bio-mechanical Systems
ASME Biennial 2005 An Experimental Investigation of the Natural Frequencies of the Tracheobrochial Network Pui Au, Diagnostics and Control Research Centre, Auckland, New Zealand, Ahmed Al-Jumaily, Auckland University of Technology, Auckland, New Zealand DETC2005-84376 Vibrations and Acoustics in Bio-mechanical Systems
ASME Biennial 2005 On the Calculation of Radiation Force on Spheres due to Arbitrary Spatially Distributed Acoustic Beams Glauber Silva, Universidade Federal de Alagoas, Maceio, Alagoas, Brazil, Mostafa Fatemi, Mayo Clinic College of Medicine, Rochester, MN, United States DETC2005-85660 Vibrations and Acoustics in Bio-mechanical Systems
ASME Biennial 2005 Vibration Control Using Connected Control Device for Two Identical Structures Arranged in Parallel Kiyofumi Fujimura, Kazuya Makita, Toru Watanabe, Kazuto Seto, Nihon University, Tokyo, Japan DETC2005-85194 Passive Damping
ASME Biennial 2005 Vibration Damping Using Low-Wave- Speed Media: Complex Wavenumber and Energy Approximations Kripa Varanasi, GE Global Research, Niskayuna, NY, United States, Samir Nayfeh, Massachusetts Institute of Technology, Cambridge, MA, United States DETC2005-85452 Passive Damping
ASME Biennial 2005 Finite Element Analysis of Wavy Composites William Pratt, Southern Utah University, Cedar City, UT, United States DETC2005-85273 Passive Damping
ASME Biennial 2005 Structural-Acoustic Optimization of Sandwich Panels Francesco Franco, University of Naples “Federico II”, Napoli, Italy, Kenneth Cunefare, Massimo Ruzzene, Georgia Institute of Technology, Atlanta, GA, United States DETC2005-85383 Passive Damping
ASME Biennial 2005 Nonlinear Stochastic Optimal Control of Quasi Hamiltonian Systems W. Q. Zhu, Zhejiang University, Hangzhou, Zhejiang, China DETC2005-84361 Random Vibration and Control
ASME Biennial 2005 Sensitivity Analysis of the Extended Bouc- Wen Model of Hysteresis Ma Fai, Ali Imam, University of California at Berkeley, Berkeley, CA, United States DETC2005-84035 Random Vibration and Control
ASME Biennial 2005 Feedback Control of Stochastic Systems to Track Prespecified Probability Density Functions Ozer Elbeyli, J. Q. Sun, University of Delaware, Newark, DE, United States DETC2005-84105 Random Vibration and Control
ASME Biennial 2005 Experimental Investigation on the Micro- Step Control Disturbance Rejection under Random Excitations Ali Selk Ghafari, Mehdi Behzad, Sharif University of Technology, Tehran, Tehran, Iran DETC2005-84531 Random Vibration and Control
ASME Biennial 2005 Transient and Steady-State Stochastic Analysis of Nonlinear Oscillators Using the Fokker-Planck- Kolmonogrov Equation Todd Rook, The Ohio State University, Tipp City, OH, United States DETC2005-85029 Random Vibration and Control
ASME Biennial 2005 Transversal Nonlinear Dynamics of Stretched Chain on Elastic Foundation Leonid I. Manevitch, Andrey I. Musienko, N.N. Semenov Institute for Chemical Physics, Moscow, Russia DETC2005-84920 System Identification and Reduced Order Modeling With Applications to Linear and Nonlinear Systems
ASME Biennial 2005 Frequency Response of Vibration Isolators with Saturating Spring Elements Mohammad Rastgaar Aagaah, Nian Mahmoudian, Reza Jazar, Mohammad Mahinfalah, North Dakota State University, Fargo, ND, United States DETC2005-84520 System Identification and Reduced Order Modeling With Applications to Linear and Nonlinear Systems
ASME Biennial 2005 Dynamics of Three Coupled van der Pol Oscillators with Application to Circadian Rhythms Kevin Rompala, Richard Rand, Cornell University, Ithaca, NY, United States, Howard Howland, Dept. of Neurobiology and Behavior, Ithaca, NY, United States DETC2005-84017 System Identification and Reduced Order Modeling With Applications to Linear and Nonlinear Systems
ASME Biennial 2005 Order Reduction of Nonlinear Systems with Periodic Quasiperiodic Coefficients Sangram Redkar, Subhash C. Sinha, Auburn University, Auburn, AL, United States DETC2005-85306 System Identification and Reduced Order Modeling With Applications to Linear and Nonlinear Systems
ASME Biennial 2005 Triggering Mechanisms of Limit Cycle Oscillations in a Two Degree-of-Freedom Wing Flutter Model Young Lee, University of Illinois at Urbana-Champaign, Urbana, IL, United States, Alexander Vakakis, National Technical University of Athens, Greece, Lawrence A. Bergman, D. Michael McFarland, University of Illinois at Urbana-Champaign, Urbana, IL, United States, Gaetan Kerschen, University of Liege, Liege, Belgium DETC2005-84687 System Identification and Reduced Order Modeling With Applications to Linear and Nonlinear Systems
ASME Biennial 2005 Effective Model Reduction for Magnetically Levitated Flexible Rotors Including Contact Dynamics Hadi Abulrub, M. Necip Sahinkaya, Patrick S. Keogh, Clifford R. Burrows, University of Bath, Bath, United Kingdom DETC2005-84418 Contact Dynamics
ASME Biennial 2005 Motion Patterns at Rotor Stator Contact Ulrich Ehehalt, Darmstadt University of Tehnology, Darmstadt, Germany, Eric Hahn, The University of New South Wales, Sdney, NSW, Australia, Richard E. Markert, Darmstadt University of Technology, Darmstadt, Germany DETC2005-84440 Contact Dynamics
ASME Biennial 2005 Multiple Solutions in an Amplitude Limited Jeffcott Rotor Including Rubbing and Stick-Slip Effect Jan-Olov Aidanpää, Luleå University of Technology, Luleå, Sweden DETC2005-84616 Contact Dynamics
ASME Biennial 2005 Vibration Analysis of Rotors in Rolling Contact - Part II: Laboratory Application and Scaling Group Michel L. Cotsaftis, Ecole Centrale d’Electronique (ECE), Paris, French Sou. Terr., Erno Keskinen, Juha Miettinen, Olli Nuutila, Pekka Salmenpera, Tampere University of Technology, Tampere, Finland DETC2005-84466 Contact Dynamics
ASME Biennial 2005 Half-Critical Response of Cylindrical Rotor to Distributed Elasticity Excitation Erno Keskinen, Tampere University of Technology, Tampere, Finland, Michel L. Cotsaftis, Ecole Centrale d’Electronique (ECE), Paris, French Sou. Terr., Matti Martikainen, Tampere University of Technology, Tampere, Finland DETC2005-85365 Contact Dynamics
ASME Biennial 2005 Interaction of Neonates with a Bubble Oscillation System Prasika Manilal, Ahmed Al-Jumaily, Auckland University of Technology, Auckland, New Zealand DETC2005-84331 Vibrations and Acoustics in Bio-Mechanical Systems
ASME Biennial 2005 In-situ Quantitative Analysis of Tumor Suppressor Protein (hDMP1) Using a Nanomechanical Cantilever Beam Ali Mallakin, WFU Baptist Medical Center, Winston-Salem, NC, United States, Kazushi Inoue, Wake Forest University Baptist Medical, Winston-Salem, NC, United States, Martin Guthold, Department of Physics, Winston-Salem, NC, United States DETC2005-84503 Vibrations and Acoustics in Bio-Mechanical Systems
ASME Biennial 2005 Using a Virtual Dummy to Simulate Vibration Dose Value for Different Car Occupants Leonardo Vita, Ettore Pennestri, Roberto Stefanelli, Pier Paolo Valentini, University of Rome Tor Vergata, Rome, Italy DETC2005-84857 Vibrations and Acoustics in Bio-Mechanical Systems
ASME Biennial 2005 An Investigation on Human Vibration Analysis Using Image Processing Method Maryam Hoviattalab, Roya Narimani, Alireza Mirbagheri, Sharif University of Technology, Tehran, Iran DETC2005-84578 Vibrations and Acoustics in Bio-Mechanical Systems
ASME Biennial 2005 Active Vibration Damping Using an Inertial, Self-Sensing, Electrodynamic Actuator Christoph Paulitsch, University of Southampton, Southampton, United Kingdom, Paolo Gardonio, Stephen J. Elliott, University of Southampon, ISVR, Southampton, United Kingdom DETC2005-84632 Active Control of Vibration and Acoustics II
ASME Biennial 2005 Adaptive Least-Mean Square Feedforward Control with Actuator Saturation by Direct Minimization Lei Zuo, Abbott Laboratories, Abbot Park, IL, United States, Samir Nayfeh, Massachusetts Institute of Technology, Cambridge, MA, United States DETC2005-85494 Active Control of Vibration and Acoustics II
ASME Biennial 2005 Motion and Vibration Control of a Flexible Transportation System Used Piezoelectric Films as Sensor for Vibration Detection Masato Nishikiori, Toru Watanabe, Kazuto Seto, Nihon University, Tokyo, Japan DETC2005-85192 Active Control of Vibration and Acoustics II
ASME Biennial 2005 Active Control of Shock Hidekazu Nishimura, Faculty of Engineering, Chiba University, Chiba, Chiba, Japan, Dezhang Wang, Yoichi Amano, Chiba University, Chiba, Japan, Taro Shimogo, Keio University, Yokohama, Japan DETC2005-85623 Active Control of Vibration and Acoustics II
ASME Biennial 2005 Optimizing Distributed-Contact Friction in Ring Dampers Xiangqing W. Tangpong, Carnegie Mellon University, Pittsburgh, PA, United States, Yuri Karpenko, Ford Motor Company, Dearborn, MI, United States, Jonathan Wickert, Adnan Akay, Carnegie Mellon University, Pittsburgh, PA, United States DETC2005-85066 Vibration and Control of Continuous Systems
ASME Biennial 2005 Wrinkling and Free Vibration of Catenary- Supported Thin Membranes Hongli Ding, Bingen Yang, University of Southern California, Los Angeles, CA, United States, Houfei Fang, Michael C. Lou, Jet Propulsion Laboratory, Pasadena, CA, United States DETC2005-85089 Vibration and Control of Continuous Systems
ASME Biennial 2005 Free Vibration Analysis of Circular FGM Plate Having Variable Thickness under Axisymmetric Condition by Finite Element Method Mansour Nik-Khah-Bahrami, Abazar Shamekhi, University of Tehran, Tehran, Tehran, Iran DETC2005-84021 Vibration and Control of Continuous Systems
ASME Biennial 2005 Iterative Learning Velocity and Tension Control for Axially Moving Materials Haiyu Zhao, Christopher Rahn, The Pennsylvania State University, University Park, PA, United States DETC2005-84700 Vibration and Control of Continuous Systems
ASME Biennial 2005 Dynamic Response of a Piezoelectric Flextensional Microactuator Jongpil Cheong, Srinivas Tadigadapa, Christopher Rahn, The Pennsylvania State University, University Park, PA, United States DETC2005-84701 Vibration and Control of Continuous Systems
ASME Biennial 2005 Dynamic Analysis of MEMS Resonators Under Primary-Resonance Excitation Ali H. Nayfeh, Virginia Polytechnic Institute and State University, Blacksburg, VA, United States, Mohammad Younis, State University of New York at Binghamton, Binghamton, NY, United States, Eihab Abdel-Rahman, Virginia Polytechnic Institute and State University, Blacksburg, VA, United States DETC2005-84146 Dynamic Analysis of Nano- and Micro-Electromechanical System
ASME Biennial 2005 Contact Analysis of the Rotor in a Variable Capacitance Micro-motor Wen-Ming Zhang, Guang Meng, Shanghai Jiao Tong University, Shanghai, China DETC2005-84009 Dynamic Analysis of Nano- and Micro-Electromechanical System
ASME Biennial 2005 Finite Element Discretization of Piezothermoelastic Equations Using the Generalized Equation of Heat Conduction Zsolt Vizvary, Budapest University of Technology and Economics, Budapest, Hungary DETC2005-84190 Dynamic Analysis of Nano- and Micro-Electromechanical System
ASME Biennial 2005 Dynamic Stability of a Single-axis Vibratory MEMS Gyroscope Tianfu Wang, Samuel Asokanthan, The University of Western Ontario, London, ON, Canada DETC2005-85090 Dynamic Analysis of Nano- and Micro-Electromechanical System
ASME Biennial 2005 Dynamic Analysis of a Torsional MEMS Scanner Mirror Part 1: Disturbance Analysis Framework Faik Can Meral, Ipek Basdogan, Koç Üniversity, Istanbul, Turkey DETC2005-85225 Dynamic Analysis of Nano- and Micro-Electromechanical System
ASME Biennial 2005 Dynamic Analysis of a Torsional MEMS Scanner Mirror, Part 2: Sensitivity Analysis Framework Faik Can Meral, Ipek Basdogan, Koç Üniversity, Istanbul, Turkey DETC2005-85330 Dynamic Analysis of Nano- and Micro-Electromechanical System
ASME Biennial 2005 Nonlinear Bending-Torsion Flutter of a Cantilever Wing Subjected to Parametric Excitation Raouf A. Ibrahim, Stefan Castravete, Wayne State University, Detroit, MI, United States DETC2005-84737 Random Vibration and Control
ASME Biennial 2005 Non-linear Systems Under Parametric Alpha-stable Lévy White Noises Mario Di Paola, Massimiliano Zingales, Antonina Pirrotta, University of Palermo, Palermo, Italy DETC2005-85685 Random Vibration and Control
ASME Biennial 2005 Random Loads Fatigue. The Use of Spectral Methods within Multibody Simulation Filippo Cianetti, University of Perugia, Perugia, Italy, Claudio Braccesi, Luca Landi, Università Degli Studi di Perugia, Perugia, PG, Italy DETC2005-84453 Random Vibration and Control
ASME Biennial 2005 Optimal Control of Random Vibration in Shell Structures with Embedded Piezoelectric Components Cho W. S. To, Tao Chen, University of Nebraska, Lincoln, NE, United States DETC2005-84792 Random Vibration and Control
ASME Biennial 2005 A Probabilistic Theory of Random Maps Ozer Elbeyli, J. Q. Sun, University of Delaware, Newark, DE, United States DETC2005-84106 Random Vibration and Control
ASME Biennial 2005 A Probabilistic Analysis for Static and Dynamic Frequency of Blade with Uncertain Boundary Conditions ZhangQi Wang, Liqiang An, Zhenzhong Peng, North China Electric Power University, Baoding, HeBei, China DETC2005-84185 Random Vibration and Control
ASME Biennial 2005 Limiting Stiffness and Damping Coefficients of Foil Bearing Jerzy Sawicki, Cleveland State University, Cleveland, OH, United States, T. V. V. L. N. Rao, BITS Pilani Dubai Campus, Dubai, U.A.E., United Arab Emir. DETC2005-84550 Fluid Bearings
ASME Biennial 2005 Stability-Optimized Clearance Configuration of Fluid-Film Journal Bearings Koichi Matsuda, Yoichi Kanemitsu, Shinya Kijimoto, Kyushu University, Fukuoka, Japan DETC2005-84671 Fluid Bearings
ASME Biennial 2005 Optimum Design of Rotor-Bearing Systems Considering the Nonlinear Effects of Bearing Fluid Forces Zhaobo Chen, Yinghou Jiao, Songbo Xia, Wenhu Huang, Harbin Institute of Technology, Harbin, Heilongjiang, China DETC2005-84677 Fluid Bearings
ASME Biennial 2005 The Effect of Bearing Properties on the Eigenvalues of a Rotordynamic System Jerry H. Ginsberg, Benjamin B. Wagner, Georgia Institute of Technology, Atlanta, GA, United States DETC2005-84787 Fluid Bearings
ASME Biennial 2005 Design and Application of a Nonlinear Energy Sink to Mitigate Vibrations of an Air Spring Supported Slab Sanjay Goyal, Timothy M. Whalen, Purdue University, West Lafayette, IN, United States DETC2005-85099 Vibration Isolation and Absorbers I
ASME Biennial 2005 Vibration Isolation of Precision Payloads for Aerial Vehicles Using Magnetorheological Isolators Young-Tai Choi, Mikel Brigley, Norman Wereley, University of Maryland, College Park, MD, United States DETC2005-85263 Vibration Isolation and Absorbers I
ASME Biennial 2005 Design of a Combined Radial-Axial Active Magnetic Bearing Seung-Jong Kim, Ha-Yong Kim, KIST, Seoul, Korea (Republic) DETC2005-85454 Vibration Isolation and Absorbers I
ASME Biennial 2005 Study of a Hybrid Vibration Isolator and Its Properties Zhu Shijian, Wu Xianjun, Naval University of Engineering, Wuhan, Hubei, China DETC2005-84277 Vibration Isolation and Absorbers I
ASME Biennial 2005 On the Inharmonicity of a Struck String Mikio Nakai, Osaka Sangyo University, Otsu, Shiga, Japan, Kazuya Kawaguchi, Mitsubishi Heavy Industries Ltd, Nagoya, Aichi, Japan DETC2005-84727 Nonlinear Vibrations of Strings and Cables
ASME Biennial 2005 Self-excited Oscillation of a Taut String in a Wire-Plate Electrode System with a Corona Discharge Yoshiaki Itoh, Kanagawa Industrial Technology Research Institute, Ebina, Kanagawa, Japan, Masatsugu Yoshizawa, Noritaka Ikejiri, Takashi Kumashiro, Keio University, Yokohama, Japan DETC2005-84321 Nonlinear Vibrations of Strings and Cables
ASME Biennial 2005 Non-Linear Dynamic Analysis of a Cable- Stayed Beam Carlos Mazzilli, Franz Rojas, Universidade de Sao Paulo, Sao Paulo, SP, Brazil DETC2005-84366 Nonlinear Vibrations of Strings and Cables
ASME Biennial 2005 Auto-Parametric Vibration of a Cable- Stayed-Beam Structure under Stochastic Loads Yong Xia, The University of Western Australia, Perth, Australia, Yozo Fujino, The University of Tokyo, Tokyo, Japan DETC2005-84477 Nonlinear Vibrations of Strings and Cables
ASME Biennial 2005 Galloping Instabilities of Geometrically Nonlinear Nonshallow Cables Under Steady Wind Flows Walter Lacarbonara, Achille Paolone, Università di Roma ‘La Sapienza’, Rome, Italy, Fabrizio Vestroni, Dipartimento di Ingegneria Strutturale e Geotecnica, Rome, Italy DETC2005-84023 Nonlinear Vibrations of Strings and Cables
ASME Biennial 2005 Study on the Response of Flexible Joint Coupling With Unbalanced Rotor Zhang Zhenzhong, Zhao Cunsheng, Zhu Shijian, Naval University of Engineering, Wuhan, Hubei, China DETC2005-84206 Engine and Powertrain Dynamics
ASME Biennial 2005 On Some Peculiarities Encountered in the Identification of Nonlinear Gear-Pair Systems Dimitrios Giagopulos, Christos Salpistis, Sotirios Natsiavas, Aristotle University, Thessaloniki, Greece DETC2005-85006 Engine and Powertrain Dynamics
ASME Biennial 2005 Determination of Engine Roughness Using Multi-Physics Numerical Predictions Malika Perera, Loughborough University, Leicestershire, United Kingdom, Stephanos Theodossiades, Homer Rahnejat DETC2005-85669 Engine and Powertrain Dynamics
ASME Biennial 2005 Continuum Model of a Slewing ISAT (Innovative Space Antenna Technology) Armaghan Salehian, Eugene M. Cliff, Daniel J. Inman, Virginia Tech, Blacksburg, VA, United States DETC2005-84025 Vibration and Control of Continuous Systems
ASME Biennial 2005 Vibration Analysis of Rotating Asymmetric Structures I. Y. (Steve) Shen, Hyunchul Kim, University of Washington, Seattle, WA, United States DETC2005-84036 Vibration and Control of Continuous Systems
ASME Biennial 2005 Vibration and Guiding of Moving Media With Edge Weave Imperfections V. Kartik, Jonathan Wickert, Carnegie Mellon University, Pittsburgh, PA, United States DETC2005-84502 Vibration and Control of Continuous Systems
ASME Biennial 2005 Modeling and Vibration Analysis of Deployable Space Boom Structures Bingen Yang, Hongli Ding, Univeristy of Southern California, Los Anageles, CA, United States, Houfei Fang, Michael C. Lou, Jet Propulsion Laboratory, Pasadena, CA, United States DETC2005-84519 Vibration and Control of Continuous Systems
ASME Biennial 2005 Spatial Motion of a String Subjected to Two Harmonic Excitations with Different Frequencies Keisuke Kamiya, Nagoya University, Nagoya, Japan, Kimihiko Yasuda, Aichi Institute of Technology, Toyoda, Aichi, Japan DETC2005-85144 Vibration and Control of Continuous Systems
ASME Biennial 2005 Time Response Dynamics of Linear Model of Microcantilever MEMS Nian Mahmoudian, Mohammad Rastgaar Aagaah, Reza Jazar, Mohammad Mahinfalah, North Dakota State University, Fargo, ND, United States DETC2005-84521 Dynamic Analysis of Nano- and Micro-Electromechanical System
ASME Biennial 2005 Effects of Axial Load on Wave Propagation in Double-Walled Carbon Nanotubes used as a Flexible Tip in AFM Hamid Dalir, Javad Akbari, Sharif University of Technology, Tehran, Tehran, Iran, Takeshi Hatsuzawa, Tokyo Institute of Technology, Tokyo, Japan, Anooshirvan Farshidianfar, Ferdowsi University of Mashhad, Mashhad, Mashhad, Iran DETC2005-84549 Dynamic Analysis of Nano- and Micro-Electromechanical System
ASME Biennial 2005 Two-Dimensional Modeling of Multilayer Multimaterial Circuit Boards by Using an EQLAM Multilayer Model Yuqi Wang, Kin Huat Low, Kay Hiang Hoon, Nanyang Technological University, Singapore, Singapore, Singapore DETC2005-84620 Dynamic Analysis of Nano- and Micro-Electromechanical System
ASME Biennial 2005 Molecular Dynamics Simulations of Carbon Nanotube-based Oscillators Shaoping Xiao, David Andersen, Wenyi Hou, The University of Iowa, Iowa City, IA, United States DETC2005-84747 Dynamic Analysis of Nano- and Micro-Electromechanical System
ASME Biennial 2005 Dynamic Finite Element Modeling of Carbon Nanotubes Using an Intrinsic Formulation Michael Leamy, MITRE, McLean, VA, United States DETC2005-84482 Dynamic Analysis of Nano- and Micro-Electromechanical System
ASME Biennial 2005 Natural Frequency Analysis of a Fixed- Fixed Cracked Plate in Bending Hien Luong T. Nguyen, Ho Chi Minh University of Technology, Ho Chi Minh City, Viet Nam, Quang Giang Vuong, Hochiminh City University of Technology, Hochiminh City, Viet Nam DETC2005-85186 Vibration and Control of Mechanical Systems
ASME Biennial 2005 Study on the Stiffness Characteristics of Air Spring with FEM Ye Zhenxia, Zhu Haichao, He Lin, Naval University of Engineering, Wuhan, Hubei, China DETC2005-84257 Vibration and Control of Mechanical Systems
ASME Biennial 2005 Model Updating Using a Quadratic Form Pablo A. Tarazaga, Virginia Tech, Blacksburg, VA, United States, Yoram Halevi, Faculty of ME -Technion, Haifa, Israel, Daniel J. Inman, Virginia Tech, Blacksburg, VA, United States DETC2005-84786 Vibration and Control of Mechanical Systems
ASME Biennial 2005 Experimental and Theoretical Investigation of Conical and Cylindrical Isolators Tongele N. Te-Alakebanga, Southern Illinois University Edwardsville, Edwardsville, IL, United States, Tung-Huei Chen, The Catholic University of America, Washington, DC, United States DETC2005-85074 Vibration and Control of Mechanical Systems
ASME Biennial 2005 Results of Vibration Control of a Maglev Vehicle Utilizing a Linear Generator Erimitsu Suzuki, Ken Watanabe, Railway Technical Research Institute, Tokyo, Japan DETC2005-84980 Vibration and Control of Mechanical Systems
ASME Biennial 2005 Unbalance Response Control of Rotor by Magneto-rheological Fluid Based Squeeze Film Damper Keun-Joo Kim, LG Electronics Inc., Seoul, Korea (Republic), Chong-Won Lee, KAIST, Daejeon, Korea (Republic) DETC2005-84526 Squeeze Film Dampers and Seals
ASME Biennial 2005 Development of Compact Damper Bearing Hiroshi Kanki, Yoshichika Sato, Takayuki Ueshima, Kobe University, Kobe, Hyogo, Japan DETC2005-84775 Squeeze Film Dampers and Seals
ASME Biennial 2005 Identification of Structural Stiffness and Damping Coefficients of a Shoed Brush Seal Adolfo Delgado, Luis San Andres, Texas A&M University, College Station, TX, United States DETC2005-84159 Squeeze Film Dampers and Seals
ASME Biennial 2005 Stability of High Pressure Turbine Under Partial Admission Condition Hiroshi Kanki, Akinori Tanitsuji, Kobe University, Kobe, Hyogo, Japan DETC2005-84774 Squeeze Film Dampers and Seals
ASME Biennial 2005 Optimum Placement of Piezoelectric Ceramic Modules for Vibration Suppression of Highly Constrained Structures Alberto Belloli, Oliver Thomaschewski, Paolo Ermanni, ETH - Swiss Federal Institute of Technology Zurich, Zurich, Switzerland DETC2005-84614 Piezoelectric Transducers for Vibration Control
ASME Biennial 2005 Analysis of Power Generating Performance for Unimorph Cantilever Piezoelectric Beams with Interdigitated Electrodes Changki Mo, SangJu National University, Sangju, Gyeongbuk, Korea (Republic), Sunghwan Kim, LG Digital Appliance Research Lab, Seoul, Korea (Republic), William W. Clark, University of Pittsburgh, Pittsburgh, PA, United States DETC2005-85657 Piezoelectric Transducers for Vibration Control
ASME Biennial 2005 Vibration Control Based on a Probabilistic Nonlinear Processing of the Piezoelement Output Voltage Daniel Guyomar, INSA Lyon, Villeurbanne, France, Adrien badel, INSA-LGEF, Villeurbanne, France, Claude Richard, INSA Lyon, Villeurbanne, France, Elie Lefeuvre, INSA-LGEF, Villeurbanne, France DETC2005-85693 Piezoelectric Transducers for Vibration Control
ASME Biennial 2005 Numerical Integration Method to Determine Periodic Solutions of Nonlinear Systems Takao Torii, Nobuyoshi Morita, Shizuoka University, Hamamatsu, Japan, Kimihiko Yasuda, Aichi institute of Technology, Toyoda, Aichi, Japan DETC2005-84529 Dynamics and Nonlinear Control
ASME Biennial 2005 Comparison of Passive and Active Energy Pumping in Mechanical Nonlinear System Andrey I. Musienko, Leonid I. Manevitch, N.N. Semenov Institute for Chemical Physics, Moscow, Russia DETC2005-84806 Dynamics and Nonlinear Control
ASME Biennial 2005 Torsional Vibration Suppression by a Centrifugal Pendulum Vibration Absorber Yukio Ishida, Nagoya University, Dept. of Mechanical Science and Engineering, Nagoya, Chikusa-ku, Japan, Tsuyoshi Inoue, Nagoya University, Nagoya, Japan, Taishi Kagawa, Nippon Steel Co, Tokai-shi, Aichi, Japan, Motohiko Ueda, Denso, Kariya-shi, Aichi, Japan DETC2005-84648 Dynamics and Nonlinear Control
ASME Biennial 2005 Local Flow Variation Method for Damage Identification Ming Liu, David Chelidze, University of Rhode Island, Kingston, RI, United States DETC2005-85142 Dynamics and Nonlinear Control
ASME Biennial 2005 Stabilization of a Buckled Beam by High- Frequency Excitation (Linear Analysis and Experiments) Koji Tsumoto, Hiroshi Yabuno, Nobuharu Aoshima, University of Tsukuba, Tsukuba, Ibaraki, Japan DETC2005-84947 Dynamics and Nonlinear Control
ASME Biennial 2005 Experimental and Analytical Analyses of a Sliding Tube Type Driveshaft Induced Vehicle Vibration Ten Bin Juang, Ming-Te Cheng, Liqun Na, Ford Motor Company, Ann Arbor, MI, United States DETC2005-84328 Engine and Powertrain Dynamics
ASME Biennial 2005 V8 Engine Bearing Dynamics – High Performance with Minimum Friction Ian McLuckie, Scott Barrett, Advanced Integrated Engineering Solutions Ltd, LeicesterShire, United Kingdom DETC2005-85001 Engine and Powertrain Dynamics
ASME Biennial 2005 Identification of Modal Damping Ratios for a Simplified Wind Turbine Tower Using Fourier Analysis Paul Murtagh, Biswajit Basu, Brian Broderick, University of Dublin, Trinity College, Dublin, Ireland DETC2005-85523 Engine and Powertrain Dynamics
ASME Biennial 2005 Development Process of Clatter and Rattle Noise Free (CARF-) Transmissions Bertsche Bernd, University of Stuttgart, Stuttagart / Germany, Baden Württemberg, Germany, Dogan Süreyya Nejat, DaimlerChrysler AG, Stuttgart, Germany, Ryborz Joachim, ZF Friedrichshafen AG, Friedrichshafen, Baden Württemberg, Germany, Stockmeier Moritz, Novak Wolfgang, University of Stuttgart, Stuttgart, Baden Württemberg, Germany DETC2005-85591 Engine and Powertrain Dynamics
ASME Biennial 2005 Integrated Multi-Body Dynamic and CAMTappet Contact Analysis for a Single Cylinder IC Engine Mircea Teodorescu, City University, London, United Kingdom, Manu Kushwaha, Ford Motor Company, Essex, United Kingdom, Homer Rahnejat, Steve Rothberg, Loughborough University, Loughborough, United Kingdom DETC2005-85728 Engine and Powertrain Dynamics
ASME Biennial 2005 Hydroelasticity Vibration of a Rectangular Tank Wall Kuksu Kim, Daewoong Kim, Youngbum Lee, Suhyun Choi, Yongsoo Kim, Daewoo Shipbuilding & Marine Engineering Co., Ltd., Geoje, Kyungnam, Korea (Republic) DETC2005-84222 Vibration and Control of Continuous Systems
ASME Biennial 2005 Dynamic Modeling and Experiment Verification of a Piezoelectric Part Feeder Paul C. P. Chao, Jeng-Sheng Huang, Chi-Wei Chiu, Jen Yin Wu-Chi, Chung-Yuan Christian University, Chung-Li, Taiwan, China DETC2005-84564 Vibration and Control of Continuous Systems
ASME Biennial 2005 Experimental Validation of a State- Switched Absorber Used to Control Vibrating Continuous Systems Mark Holdhusen, University of Wisconsin-Marathon County, Wausau, WI, United States, Kenneth Cunefare, The Georgia Institute of Technology, Atlanta, GA, United States DETC2005-85021 Vibration and Control of Continuous Systems
ASME Biennial 2005 Dynamic Stability of Ring-based MEMS Gyroscopes Jihyun Cho, Samuel Asokanthan, The University of Western Ontario, London, ON, Canada DETC2005-85321 Vibration and Control of Continuous Systems
ASME Biennial 2005 The Measurement of the Dynamic Properties for an Elastic Half-Space Medium Hamid Hmaidzadeh, Tennessee State University, Nashville, TN, United States, Mohammad Dehghani, Lawrence Livermore National Laboratory, Livermore, CA, United States DETC2005-85600 Vibration and Control of Continuous Systems
ASME Biennial 2005 Nonlinear MultiMode Dynamics of a Microbeam for Noncontact Atomic Force Microscopy in Ultra-High Vacuum Oded Gottlieb, W. Wu, Technion - Israel Institute of Technology, Haifa, Israel, S. Pragai, Israel Institue of Technology, Haifa, Israel DETC2005-85742 Dynamic Analysis of Nano- and Micro-electromechanical Systems
ASME Biennial 2005 Nonlinear Identification of a Capacitive Dual-Backplate MEMS Microphone Jian Liu, David Martin, Karthik Kadirvel, Toshikazu Nishida, Mark Sheplak, Brian Mann, University of Florida, Gainesville, FL, United States DETC2005-84591 Dynamic Analysis of Nano- and Micro-electromechanical Systems
ASME Biennial 2005 Nonlinear Response of Parametrically- Excited MEMS Jeffrey F. Rhoads, Steve Shaw, Michigan State University, East Lansing, MI, United States, Kimberly L. Turner, Jeff Moehlis, Barry E. DeMartini, Wenhua Zhang, University of California, Santa Barbara, Santa Barbara, CA, United States DETC2005-84603 Dynamic Analysis of Nano- and Micro-electromechanical Systems
ASME Biennial 2005 Subharmonic Excitation for Electrically Actuated Microbeams Ali H. Nayfeh, Virginia Polytechnic Institute and State University, Blacksburg, VA, United States, Mohammad Younis, State University of New York at Binghamton, Binghamton, NY, United States DETC2005-84144 Dynamic Analysis of Nano- and Micro-electromechanical Systems
ASME Biennial 2005 A Study of Errors Induced by Decoupling Approximation in Damped Linear Vibratory Systems Nopdanai Ajavakom, Fai Ma, University of California at Berkeley, Berkeley, CA, United States DETC2005-85207 Vibration and Control of Mechanical Systems
ASME Biennial 2005 Advanced Model-Based Disturbance Compensation Control using Proportional-Integral-Observer Idriz Krajcin, Dirk Soeddker, University Duisburg-Essen, Duisburg, Germany DETC2005-84997 Vibration and Control of Mechanical Systems
ASME Biennial 2005 Maximally Robust Sway Free Point-to- Point Transportation of Boom Crane Loads by a FIR Filtering Approach of the Motion Commands George N. Glossiotis, Ioannis Antoniadis, National Technical University of Athens, Athens, Greece DETC2005-84846 Vibration and Control of Mechanical Systems
ASME Biennial 2005 Reduction of Vibration for an Axially Moving String with a Tensioner Li-Qun Chen, Shanghai University, Shanghai, China, Wei Zhang, Shanghai Institute of Applied Mathematics and Mechanics, Shanghai, China DETC2005-84439 Vibration and Control of Mechanical Systems
ASME Biennial 2005 Active Damping Guide Roller Design Based on Integrated Structure/Controller Optimization with a Structured Controller W. J. Fu, C. M. Zhu, Shanghai Jiaotong University, Shanghai, China DETC2005-84545 Vibration and Control of Mechanical Systems
ASME Biennial 2005 Power Transmission System Modelling Morteza Ebrahimi, Robert Whalley, University Bradford, Bradford, United Kingdom DETC2005-84307 Vibration and Control of Mechanical Systems
ASME Biennial 2005 Experimental Compensation of Runout and High Order Harmonic Effects in Lorentz Force Type Integrated Motor-Bearing System Sung-Ho Park, Chong-Won Lee, KAIST, Daejeon, Korea (Republic) DETC2005-85483 Magnetic Force Utilization
ASME Biennial 2005 Modelling of Magnetic Pull in Large Size Generator Paolo Pennacchi, Politecnico di Milano, Milano, MI, Italy, Lucia Frosini, Università di Pavia, Pavia, PV, Italy DETC2005-85368 Magnetic Force Utilization
ASME Biennial 2005 An Optimal Control Algorithm for Suppression of Harmonic Base Excitation in Nonlinear Magnetic Bearings Steven Marx, Naval Surface Warfare Center, Philadelphia, PA, United States, C. Nataraj, Villanova University, Villanova, PA, United States DETC2005-85630 Magnetic Force Utilization
ASME Biennial 2005 Structural Finite Element Modeling of Electromechanical Interaction in Rotordynamics of Electrical Machines Antti Laiho, Helsinki University of Technology, Espoo, Espoo, Finland, Timo P. Holopainen, ABB Electrical Machines, Helsinki, Finland, Paul Klinge, VTT Industrial Systems, Helsinki, Finland, Antero Arkkio, Laboratory of Electromechanics, Helsinki, Finland DETC2005-85255 Magnetic Force Utilization
ASME Biennial 2005 Vibration Isolation Control via Simultaneous Left and Right Eigenvector Assignment Tian-Yau Wu, Kon-Well Wang, Penn State University, University Park, PA, United States DETC2005-84824 Vibration Isolation and Absorbers II
ASME Biennial 2005 Control Bifurcations of a Magneto-rheological Fluid Based Active Suspension System Amit Shukla, Miami University, Oxford, OH, United States DETC2005-85436 Vibration Isolation and Absorbers II
ASME Biennial 2005 Study on Optimization Design of Hybrid Vibration Isolation System on Flexible Foundation Mao Weimin, Zhu Shijian, Naval University of Engineering, Wuhan, Hubei, China, Jiang Huiming, Hubei University of Technology, Wuhan, Hubei, China DETC2005-84315 Vibration Isolation and Absorbers II
ASME Biennial 2005 Study on the Sensitivity of Controllable Parameters in an Active Vibration Isolation System of Air Spring With Rubber Bellow Shuai Chg, Lin He, Zhiqiang Lu, Naval University of Engineering, Wuhan, Hubei, China DETC2005-84370 Vibration Isolation and Absorbers II
ASME Biennial 2005 Nonlinear Dynamics of Closed Spherical Shells Ali H. Nayfeh, Haider N. Arafat, Virginia Polytechnic Institute and State University, Blacksburg, VA, United States DETC2005-85409 Dynamics, Bifurcations, and Nonlinear Phenomena
ASME Biennial 2005 Parametric Resonance of Hopf Bifurcation Richard Rand, Cornell University, Ithaca, NY, United States, Albert Barcilon, Dept. Meteorology and GFDI, Tallahassee, FL, United States, Tina Morrison, Cornell University, Ithaca, NY, United States DETC2005-84016 Dynamics, Bifurcations, and Nonlinear Phenomena
ASME Biennial 2005 Nonlinear Vibrations of a Beam with a Tip Mass Attached to a Rotating Hub Jerzy Warminski, Lublin University of Technology, Lublin, Poland, José M balthazar, State University of Sao Paulo at Rio Claro, Rio Claro, Brazil DETC2005-84518 Dynamics, Bifurcations, and Nonlinear Phenomena
ASME Biennial 2005 Degenerate Bifurcation Scenarios in the Dynamics of Coupled Oscillators with Symmetric Nonlinearities Oleg Gendelman, Technion - Israel Institute of Technology, Haifa, Israel DETC2005-84373 Dynamics, Bifurcations, and Nonlinear Phenomena
ASME Biennial 2005 Nonlinear Vibrations of Elastic Structures Carrying Two Rectangular Liquid-Filled Tanks Under Horizontal Excitation Takashi Ikeda, Shimane University, Matsue, Shimane, Japan DETC2005-84476 Dynamics, Bifurcations, and Nonlinear Phenomena
ASME Biennial 2005 An Overview on a Nonideal System With Three and a Half Degrees of Freedom Karen L. Guilherme, Paulo R. G. Kurka, UNICAMP, Campinas, São Paulo, Brazil, José M balthazar, State University of Sao Paulo at Rio Claro, Rio Claro, Rio Claro, Brazil, Masayoshi Tsuchida, State University of São Paulo - IBILCE, São José do Rio Preto, São Paulo, Brazil DETC2005-85426 Dynamics, Bifurcations, and Nonlinear Phenomena
ASME Biennial 2005 Study on Tool Wear and Vibration Characteristics in Micro Drilling Operation Ying Tang, University of Science and Technology Beijing, Beijing, Beijing, China, Yuan Ji, Beijing University of Aeronautics and Astronautics, Beijing, Beijing, China DETC2005-84071 Dynamics, Vibrations and Control in Manufacturing Systems
ASME Biennial 2005 A Comprehensive Model for Cutting Dynamics Achala V. Dassanayake, C. Steve Suh, Texas A&M University, College Station, TX, United States DETC2005-85075 Dynamics, Vibrations and Control in Manufacturing Systems
ASME Biennial 2005 Enhancement of Turning Process Using Vibration Signature Analysis Marlon C. Batey, NASA Langley Research Center, Hampton, VA, United States, Hamid Hmaidzadeh, Tennessee State University, Nashville, TN, United States DETC2005-85567 Dynamics, Vibrations and Control in Manufacturing Systems
ASME Biennial 2005 Forced Response of Translating Media with Variable Length and Tension and a Mass-Spring Termination Yan Chen, Weidong Zhu, University of Maryland Baltimore County, Baltimore, MD, United States DETC2005-85747 Vibration and Control of Mechanical Systems
ASME Biennial 2005 Multi-Pulse Chaotic Motions of a Rotor- Active Magnetic Bearing with Time-Varying Stiffness Wei Zhang, Ming-Hui Yao, Xue-Ping Zhan, Li-Lai Bai, Beijing University of Technology, Beijing, China DETC2005-84676 Vibration and Control of Mechanical Systems
ASME Biennial 2005 Aspects of Osillations of Beams and Plates Mariya Zarubinska, Wim T. van Horssen, Delft University of Technology, Delft, Netherlands DETC2005-84969 Vibration and Control of Mechanical Systems
ASME Biennial 2005 Main Resonance of a Nonlinear Oscillator under Semi-Active Control Yongjun Shen, Shaopu Yang, Shijiazhuang Railway Institute, Shijiazhuang City, Hebei, China DETC2005-84724 Vibration and Control of Mechanical Systems
ASME Biennial 2005 Simulation of Engine Vibration on Nonlinear Hydraulic Engine Mounts A.R. Ohadi, Amirkabir University of Technology, Tehran, Iran, G. Maghsoodi, Iran University of Science and Technology, Tehran, Iran DETC2005-85684 Vibration and Control of Mechanical Systems
ASME Biennial 2005 Dynamic Displacement Tracking of Force- Loaded Linear Elastic or Viscoelastic Bodies by Eigenstrain- Induced Actuation Stresses Hans Irschik, Michael Krommer, University of Linz, Linz, Austria DETC2005-84835 Dynamics, Oscillations, and Stability
ASME Biennial 2005 An Efficient Computation Method for Hopf Bifurcation of High Dimensional Systems Songhui Zhu, Benedict College, Columbia, SC, United States, Pei Yu, The University of Western Ontario, London, ON, Canada, Stacey Jones, Benedict College, Columbia, SC, United States DETC2005-85294 Dynamics, Oscillations, and Stability
ASME Biennial 2005 Stability, Bifurcation and Jumping Phenomenon in a 2-D Model of Supersonic Lifting Surfaces Pei Yu, Zhen Chen, The University of Western Ontario, London, ON, Canada, Liviu Librescu, Virginia Polytechnic Institute and State University, Blacksburg, VA, United States, Piergiovanni Marzocca, Clarkson University, Potsdam, NY, United States DETC2005-85312 Dynamics, Oscillations, and Stability
ASME Biennial 2005 Differential Cable Length Manipulation for Oscillation Control of Quay-Side Container Cranes Ziyad Masoud, Virginia Tech, Blacksburg, VA, United States DETC2005-85320 Dynamics, Oscillations, and Stability
ASME Biennial 2005 Structural Dynamic and Aeroelastic Finite Element Simulation of an F-18 Tail Rudder, Impact of Adding a Control Surface Kevin Anderson, Kevin White, Wayne McEntire, California State Polytechnic University at Pomona, Pomona, CA, United States DETC2005-85586 Dynamics, Oscillations, and Stability
ASME Biennial 2005 Orbit Motion Tracking Control for Rotating Machine with Magnetic Suspensions Guangyoung Sun, NASA John H. Glenn Research Center, Cleveland, OH, United States DETC2005-84249 Active Magnetic Bearings
ASME Biennial 2005 Rotor Drop Transient Analysis of AMB Machinery R.G. Kirk, Virginia Tech, Blacksburg, VA, United States, E.J. Gunter, Rodyn Vibration Analysis, Inc., Charlottesville, VA, United States, W. J. Chen, Eigen Technologies Inc., Davidson, NC, United States DETC2005-84272 Active Magnetic Bearings
ASME Biennial 2005 An Evaluation of Stability Indices Using Sensitivity Functions for Active Magnetic Bearing Supported High-Speed Rotor Naohiko Takahashi, Hitachi Industries Co., Ltd., Tsuchiura, Ibaraki-ken, Japan, Hiroyuki Fujiwara, Makoto Ito, National Defense Academy, Yokosuka, Kanagawa-ken, Japan, Yasuo Fukushima, Hitachi Industries Co., Ltd., Tsuchiura, Ibarakiken, Japan, Osami Matsushita, National Defense Academy, Yokosuka, Kanagawa-ken, Japan DETC2005-84836 Active Magnetic Bearings
ASME Biennial 2005 Modeling, Motion and Vibration Control for Flexible Rotor Supported by Active Magnetic Bearings Yuichi Nakajima, Takahito Sagane, Nihon University, Tokyo, Japan, Hiroshi Tajima, Nihon University, Zama, Kanagawa, Japan, Toru Watanabe, Kazuto Seto, Nihon University, Tokyo, Japan DETC2005-85195 Active Magnetic Bearings
ASME Biennial 2005 Modular Add-on System for Vibration Control in Gantry Milling Machines Haitham Rashidy, Michael F. Zäh, Florian Grätz, Institute for Machine Tools and Industrial Management, Munich, Germany DETC2005-84142 Dynamics, Vibrations and Control in Manufacturing Systems
ASME Biennial 2005 Nonlinear Dynamics and Control of Ultrasonically Assisted Machining Vladimir Babitsky, Loughborough University, Loughborough, LEICS, United Kingdom, V. Astashev, Institute of Machine Studies, Russian Academy of Sciences, Moscow, Russia DETC2005-84304 Dynamics, Vibrations and Control in Manufacturing Systems
ASME Biennial 2005 Adaptive Modeling of Laser Powder Deposition Process for Control and Monitoring Application Mohammad Durali, Alireza Fathi, Sharif University of Technology, Tehran, Iran, Amir Khajepour, Ehsan Toyserkani, University of Waterloo, Waterloo, ON, Canada DETC2005-84911 Dynamics, Vibrations and Control in Manufacturing Systems
ASME Biennial 2005 Observer Based Adaptive Backstepping Velocity Controller for a Flexible Mechanism of a PMLSM Markus Hirvonen, Olli Pyrhönen, Heikki Handroos, Lappeenranta University of Technology, Lappeenranta, Finland DETC2005-84991 Dynamics, Vibrations and Control in Manufacturing Systems
ASME Biennial 2005 About the Links Between the Static and Dynamic Stabilities Jean Lerbet, Navier Institut, Ecole Nationale des Ponts et Chaussées, Marne-La-Vallée, France DETC2005-84130 Dynamics, Oscillations, and Stability
ASME Biennial 2005 A Boundary Tracing Method and Its Application to Inward-Oriented Rotating Cantilever Beam Lothar Gaul, Nils Wagner, University of Stuttgart, Stuttgart, Germany DETC2005-84411 Dynamics, Oscillations, and Stability
ASME Biennial 2005 Double-Hopf Bifurcation in an Oscillator with External Forcing and Time-Delayed Feedback Control Zhen Chen, Pei Yu, The University of Western Ontario, London, ON, Canada DETC2005-85549 Dynamics, Oscillations, and Stability
ASME Biennial 2005 Hamilton’s Principle for Fluid-Structure Interaction and Applications to Reduced-Order Modeling Rene Gabbai, Haym Benaroya, Rutgers, The State University of NJ, Piscataway, NJ, United States DETC2005-84145 Nonlinear Fluid-Structure Interactions I
ASME Biennial 2005 Suppression of Limit Cycle Oscillations in a van der Pol Oscillator by Means of a Passive Nonlinear Energy Sink Young Lee, University of Illinois at Urbana-Champaign, Urbana, IL, United States, Alexander Vakakis, Lawrence A. Bergman, University of Illinois, Urbana, IL, United States, D. Michael McFarland, University of Illinois at Urbana-Champaign, Urbana, IL, United States DETC2005-84691 Nonlinear Fluid-Structure Interactions I
ASME Biennial 2005 Vortex-induced Vibration of a Cylinder Spring-supported in a Narrow Channel (Influence of Spring Stiffness on the Interaction of Cylinder Vibration and Unsteady Fluid Flow) Shunsuke Aritomi, Keio University, Yokohama, Japan, Shinichi Maruyama, Gunma University, Gunma, Japan, Kenya Ito, Masatsugu Yoshizawa, Keio University, Yokohama, Japan DETC2005-84960 Nonlinear Fluid-Structure Interactions I
ASME Biennial 2005 Quantifying Attractor Morphing for High- Sensitivity Detection of Parameter Variations by Point Cloud Averaging Ali Hashmi, Bogdan Epureanu, University of Michigan - Ann Arbor, Ann Arbor, MI, United States DETC2005-85022 Nonlinear Fluid-Structure Interactions I
ASME Biennial 2005 Recent Results on Non-Linear Dynamic Response of Advanced Sandwich Panels Under In-Air/ Underwater Explosion (Presentation Only) Liviu Librescu, Virginia Polytechnic Institute and State University, Blacksburg, VA, United States DETC2005-85784 Nonlinear Fluid-Structure Interactions I
ASME Biennial 2005 Sound-Radiation Analysis for Boat Hull Based on Hammering Test and BEM Taro Tomatsu, Tokio Inst. of Technology, Tokio, Japan, Tetsuya Otsuka, Masaaki Okuma, Tokyo Institute of Technology, Tokyo, Japan, Takeshi Okada, Tetsuro Ikeno, Kazuyuki Shiomi, Honda R&D Co., Ltd., Saitama, Japan DETC2005-84628 Coupling Experimental Based Models with Analytical Models in Linear and Nonlinear Dynamics
ASME Biennial 2005 Dynamic Behaviour Characterization of a Brake Disc by means of Electronic Speckle Pattern Interferometry Measurements Alessandro Zanarini, Research & Development, Dantec Ettemeyer GmbH, Ulm, Germany DETC2005-84630 Coupling Experimental Based Models with Analytical Models in Linear and Nonlinear Dynamics
ASME Biennial 2005 Railway Bridges Identification Techniques Luigi Garibaldi, Politecnico di Torino, Torino, Italy, Luigi Bregant, University of Trieste, Trieste, Italy, Claudio Valente, University “G.d’Annunzio”, Chieti-Pescara, Italy, Fabio Brancaleoni, University of “Roma TRE”, Rome, Italy, Giuseppe Catania, Diem, University of Bologna, Bologna, Italy DETC2005-84650 Coupling Experimental Based Models with Analytical Models in Linear and Nonlinear Dynamics
ASME Biennial 2005 Modelling Approach for a High Speed Machine Tool Spindle-Bearing System Vincent Gagnol, Belhassen-Chedli Bouzgarrou, Pascal Ray, LAMI - Mechanical Engineering Research Group, Aubiere, France, Christian Barra, PCI-SCEMM, Saint Etienne, France DETC2005-84681 Coupling Experimental Based Models with Analytical Models in Linear and Nonlinear Dynamics
ASME Biennial 2005 Dynamic Hybrid Modeling of the Vertical Z Axis in an HSM Machining Center:Towards Virtual Machining Giovanni Tani, Diem, University of Bologna, Bologna, Italy, Alessandro Fortunato, Claudio Mantega, University of Bologna, Bologna, Italy, Raffaele Bedini, University of Florence, Florence, Italy DETC2005-84810 Coupling Experimental Based Models with Analytical Models in Linear and Nonlinear Dynamics
ASME Biennial 2005 Fault Diagnosis and Prognosis for Fuel Supply System in Gas Turbine Engines Kyusung Kim, Onder Uluyol, Charles Ball, Honeywell, Minneapolis, MN, United States DETC2005-84615 On the Use of Instrumentation, Signal Processing and AI Tools to Monitor, Diagnose and Control Complex Systems
ASME Biennial 2005 The Development of a Monitoring and Control System for Pulverised Coal Flames Using Artificial Intelligence Techniques Oui H Tan, Steve Wilcox, John Ward, University of Glamorgan, Pontypridd, Wales, United Kingdom DETC2005-85018 On the Use of Instrumentation, Signal Processing and AI Tools to Monitor, Diagnose and Control Complex Systems
ASME Biennial 2005 The Design of Enhanced Condition Monitoring Systems Using a Novel Sensor Positioning and Signal Conditioning Approach Amin Al-Habaibeh, Nottingham Trent University, Nottingham, United Kingdom, R. M. Parkin, Lensys Ltd., Loughborough, United Kingdom, J. Redgate, Advanced Design and Manufacturing, Nottingham, United Kingdom DETC2005-85658 On the Use of Instrumentation, Signal Processing and AI Tools to Monitor, Diagnose and Control Complex Systems
ASME Biennial 2005 Embedded Fault Tree Logic Implementation Based on Complex Programmable Logic Device Yuguo Sun, University of Shanghai for Science and Technology, Shanghai, China, Jin Chen, Shanghai Jiaotong University, Shanghai, China DETC2005-84886 On the Use of Instrumentation, Signal Processing and AI Tools to Monitor, Diagnose and Control Complex Systems
ASME Biennial 2005 Chaotic Motions of a Parametrically Excited Pendulum with Non-Exponentially Small Parameters C. Lu, Southern Illinois University, Edwardsville, IL, United States DETC2005-84636 Classic and Quantum Dynamics
ASME Biennial 2005 Levy Flights Over Quantum Paths Nick Laskin, TopQuark Inc., Toronto, ON, Canada DETC2005-84469 Classic and Quantum Dynamics
ASME Biennial 2005 Visualizing Coherent and Fractal Structures in Numerical Experiments on Chaotic Advection in Fluids Sergey Prants, V.I. Il’ichev Pacific Ist., Russ. Ac. Sci, Vladivostok, Russia, Maxim V. Budyansky, V.I. Il’ichev Pacific Oceanological Ist., Vladivostok, Russia DETC2005-84088 Classic and Quantum Dynamics
ASME Biennial 2005 Chaos and Quasi-Periodic Motions on the Homoclinic Surface of Nonlinear Hamiltonian Systems with Two Degrees of Freedom Albert Luo, Southern Illinois University Edwardsville, Edwardsville, IL, United States DETC2005-84754 Classic and Quantum Dynamics
ASME Biennial 2005 The Application of Cell Mapping Method to High-Dimensional Nonlinear System Yu Xiang, Zhu Shijian, Liu Shuyong, Naval University of Engineering, Wuhan, Hubei, China DETC2005-84203 Classic and Quantum Dynamics
ASME Biennial 2005 Finite Element Analysis for Interior Booming Noise Reduction in a Tractor Cabin Jason Cao, Liming Dai, University of Regina, Regina, SK, Canada DETC2005-84151 Acoustics and Wave Propagation
ASME Biennial 2005 Homogenization of Vibrating Periodic Lattice Structures Stefano Gonella, Massimo Ruzzene, Georgia Institute of Technology, Atlanta, GA, United States DETC2005-84428 Acoustics and Wave Propagation
ASME Biennial 2005 Nearfield Acoustic Holography Using Energy-Based Measurements Michael Harris, Jonathan Blotter, Scott Sommerfeldt, Brigham Young University, Provo, UT, United States, Hans-Elias de Bree, Microflown Technologies, Zevenaar, Netherlands DETC2005-85080 Acoustics and Wave Propagation
ASME Biennial 2005 Sound Quality Testing and Analysis of Multiple Brands of Sewing Machines James J. Chatterley, Scott Sommerfeldt, Jonathan Blotter, Andrew J. Boone, Craig C. Smith, Brigham Young University, Provo, UT, United States, Thomas L. Lagö, Brigham Young University and Axiom EduTech, Alpine, UT, United States DETC2005-85636 Acoustics and Wave Propagation
ASME Biennial 2005 Finite Element Method for Dynamic Analyzing in the Underground Structure Hui Qi, Wentao Li, Mingqiang Li, Harbin Engineering University, Harbin, Heilongjiang, China DETC2005-85706 Acoustics and Wave Propagation
ASME Biennial 2005 Analysis of Nonlinear Vibration for the Cracked Rotors with Unsymmetrical Viscoelastic Supported Conditions Changping Chen, Yiming Fu, Hunan University, P.R.China, Changsha, Hunan, China, Liming Dai, University of Regina, Regina, SK, Canada DETC2005-85718 Acoustics and Wave Propagation
ASME Biennial 2005 Multi-Stage Modeling of Turbine Engine Rotor Vibration Sang Heon Song, Matthew P. Castanier, Christophe Pierre, University of Michigan, Ann Arbor, MI, United States DETC2005-85740 Nonlinear Fluid-Structure Interactions II
ASME Biennial 2005 Investigating the Effects of Porous Material Compression on the Acoustical Behavior of Absorption and Barrier Materials A. R. Ohadi, Amirkabir University of Technology, Tehran, Iran, M. Moghaddami, Iran University of Science and Technology, Tehran, Iran DETC2005-85683 Nonlinear Fluid-Structure Interactions II
ASME Biennial 2005 Disk Design Methodology for Reducing Blade Vibration in Turbine Engine Rotors Sanghum Baik, Matthew P. Castanier, Christophe Pierre, University of Michigan, Ann Arbor, MI, United States DETC2005-85741 Nonlinear Fluid-Structure Interactions II
ASME Biennial 2005 Modeling the Transient and Steady-State Flow over a Stationary Cylinder Ali H. Nayfeh, Osama A. Marzouk, Haider N. Arafat, Imran Akhtar, Virginia Polytechnic Institute and State University, Blacksburg, VA, United States DETC2005-85376 Nonlinear Fluid-Structure Interactions II
ASME Biennial 2005 Prestress Effects in Fluid-Structure Vibration Analysis (Presentation Only) Roger Ohayon, Conservatoire National des Arts et Metiers (CNAM), Paris, France DETC2005-85786 Nonlinear Fluid-Structure Interactions II
ASME Biennial 2005 A Method to Identify the Stiffness of Engine Mounts using Experimental Modal Analysis Taro Tomatsu, Tokio Inst. of Technology, Tokio, Japan, Takeshi Okada, Tetsuro Ikeno, Kazuyuki Shiomi, Honda R&D Co., Ltd., Saitama, Japan, Masaaki Okuma, Tokyo Institute of Technology, Tokyo, Japan DETC2005-84629 Coupling Experimental Based Models with Analytical Models in Linear and Nonlinear Dynamics
ASME Biennial 2005 Damage Location Assessment in a Composite Panel by Means of Electronic Speckle Pattern Interferometry Measurements Alessandro Zanarini, Research & Development, Dantec Ettemeyer GmbH, Ulm, Germany DETC2005-84631 Coupling Experimental Based Models with Analytical Models in Linear and Nonlinear Dynamics
ASME Biennial 2005 Frequency Domain Analysis of a Fractional Derivative SDOF System Luigi Garibaldi, Politecnico di Torino, Torino, Italy, Silvio Sorrentino, Sheffield University, Sheffield, United Kingdom DETC2005-84651 Coupling Experimental Based Models with Analytical Models in Linear and Nonlinear Dynamics
ASME Biennial 2005 Analytical Solutions to Surface Location Error in Milling Tony Schmitz, Brian Mann, University of Florida, Gainesville, FL, United States DETC2005-84805 Coupling Experimental Based Models with Analytical Models in Linear and Nonlinear Dynamics
ASME Biennial 2005 Degradation Assessment for Machinery Prognostics Using Hidden Markov Models Hai Qiu, University of Wisconsin-Milwaukee, Milwaukee, WI, United States, Haitao Liao, Wichita State University, Wichita, KS, United States, Jay Lee, University of Cincinnati, Cincinnati, OH, United States DETC2005-84193 Advances on Remote and Embedded Prognostics
ASME Biennial 2005 The Use Of Artificial Intelligence In The Modelling And Heat Treatment Parameters Identification For Alloy-Steel Re-Heating Process Zyh Siong Chong, Steve Wilcox, John Ward, University of Glamorgan, Pontypridd, United Kingdom DETC2005-84802 Advances on Remote and Embedded Prognostics
ASME Biennial 2005 Sensitivity Analysis of an Information Maximization Approach to the Blind Separation of the Vibration Responses of Defective Rolling Element Bearings Christos Yiakopoulos, Ioannis Antoniadis, National Technical University of Athens, Athens, Greece DETC2005-85226 Advances on Remote and Embedded Prognostics
ASME Biennial 2005 Smart Asset Maintenance System for Machine Fault Diagnosis - Its Effectiveness, Methodology, and Applications Jacko T Leung, Peter W.T. Tse, City University of Hong Kong, Hong Kong, China DETC2005-84300 Advances on Remote and Embedded Prognostics
ASME Biennial 2005 Quantum Chaos and Quantum Fractals with Atoms and Photons in a Microcavity Sergey Prants, Michael Uleysky, V.I. Il’ichev Pacific Ist., Russ. Ac. Sci, Vladivostok, Russia DETC2005-84090 Classic and Quantum Dynamics
ASME Biennial 2005 Equation of Nonlinear Motion of Viscoelastic Beams Nima S. Mahmoodi, Siamak E. Khadem, Tarbiat Modaress University, Tehran, Iran, Ebrahim Esmailzadeh, University of Ontario Inst. of Tech., Oshawa, ON, Canada DETC2005-84944 Classic and Quantum Dynamics
ASME Biennial 2005 Numerical Assessment of Nonlinear Electric Field of HVDC Wall Bushing Longfu Luo, Hunan University, Changsha, China, Liming Dai, University of Regina, Regina, SK, Canada DETC2005-85710 Classic and Quantum Dynamics
ASME Biennial 2005 Transition Curves for Nonhomogeneous Mathieu Equation Davood Younesian, Ebrahim Esmailzadeh, University of Ontario Inst. of Tech., Oshawa, ON, Canada, Ramin Sedaghati, Concordia University, Montreal, QC, Canada DETC2005-85170 Classic and Quantum Dynamics
ASME Biennial 2005 Improved Current Statistic Model and Adaptive Filtering Hongtao Hu, Zhongliang Jing, Shanghai Jiao Tong University, Shanghai, China DETC2005-85726 Classic and Quantum Dynamics
ASME Biennial 2005 An Analytic Study on Controlling Duffing Chaos in Amplitude Domain and in Frequency Domain Jiehua Peng, Shaoyang University, Shaoyang, Hunan Province, China, Jiashi Tang, Hunan University, Changsha, China DETC2005-84970 Classic and Quantum Dynamics
ASME Biennial 2005 Cavitation Detection of a Centrifugal Pump Using Noise Spectrum Seyed Farshid Chini, Hassan Rahimzadeh, Mohsen Bahrami, Amirkabir University of Technology, Tehran, Iran DETC2005-84363 Acoustics and Wave Propagation
ASME Biennial 2005 End Effects and Dynamic Equivalence In Mechanical Waveguides Baruch Karp, Ben-Gurion University, Beer-Sheva, Israel DETC2005-84931 Acoustics and Wave Propagation
ASME Biennial 2005 Wave Field in Fluid Saturated Porous Media Subjected to Excitations of Multiple Energy Sources Liming Dai, Guoqing Wang, University of Regina, Regina, SK, Canada DETC2005-85601 Acoustics and Wave Propagation
ASME Biennial 2005 Dynamic Anti-Plane Characteristic of an Infinite Piezoelectric Medium with a Non-Circular Cavity Tianshu Song, Lili Sun, Diankui Liu, Harbin Engineering University, Harbin, Heilongjiang, China DETC2005-85695 Acoustics and Wave Propagation
ASME Biennial 2005 A Musical Use for the Haar Function Wavelet Daryl Caswell, University of Calgary, Calgary, AB, Canada DETC2005-85713 Acoustics and Wave Propagation
ASME Biennial 2005 Free Vibration of Elliptical Plates in Uniform Temperature Field Xiaohu Yao, Qing Han, South China University of Technology, Guangzhou, China, Liming Dai, University of Regina, Regina, SK, Canada DETC2005-85775 Acoustics and Wave Propagation
ASME Biennial 2005 A Technique for Assessing Tire Forces in a Vehicle Moving Along a Harmonic Profile and Its Application to Low-Speed Testing Alexander V. Pesterev, Institute for Systems Analysis, Moscow, Russia, Lawrence A. Bergman, University of Illinois, Urbana, IL, United States, Chin An Tan, Wayne State University, Detroit, MI, United States DETC2005-85259 Coupling Experimental Based Models with Analytical Models in Linear and Nonlinear Dynamics
ASME Biennial 2005 Modal Identification of Multi-Degree-of- Freedom Mechanical Systems Endowed with Geometric Nonlinearities Rodolfo Camillacci, Fabio Brancaleoni, University of “Roma TRE”, Rome, Italy, Claudio Valente, University “G.d’Annunzio”, Chieti-Pescara, Italy DETC2005-85524 Coupling Experimental Based Models with Analytical Models in Linear and Nonlinear Dynamics
ASME Biennial 2005 Nonlinear Modeling and Experimental Identification of Hemispherical Soft Pads for Robotic Manipulators Paolo Tiezzi, Luigi Biagiotti, Claudio Melchiorri, Gabriele Vassura, University of Bologna, Bologna, Italy DETC2005-85659 Coupling Experimental Based Models with Analytical Models in Linear and Nonlinear Dynamics
ASME Biennial 2005 A New Method for Multi-fault Diagnosis of Rotor System Jianping Jing, Guang Meng, Shanghai Jiaotong University, Shanghai, China DETC2005-84178 Advanced Signal Processing Techniques for Condition Monitoring and Fault Diagnostics
ASME Biennial 2005 Comprehensive Method of Chaotic Vibration Identification Liu Shuyong, Wuhan Naval University of Engineering, Wuhan, China, Yu Xiang, Zhu Shijian, Naval University of Engineering, Wuhan, Hubei, China DETC2005-84212 Advanced Signal Processing Techniques for Condition Monitoring and Fault Diagnostics
ASME Biennial 2005 Dynamic-Signal Characterization of Rotary Machinery Using Improved Gabor Order Tracking Technique Min-Chun Pan, Sh.-W. Liao, National Central University, Taoyuan County, Taiwan/China DETC2005-84358 Advanced Signal Processing Techniques for Condition Monitoring and Fault Diagnostics
ASME Biennial 2005 Order Tracking Techniques in Diagnostic Tasks Min-Chun Pan, National Central University, Taoyuan County, Taiwan/China DETC2005-84359 Advanced Signal Processing Techniques for Condition Monitoring and Fault Diagnostics
ASME Biennial 2005 Direct and Indirect Vibro-Acoustic Measurements for Road Noise NVH Predictions Alessandro Zanarini, Research & Development, Dantec Ettemeyer GmbH, Ulm, Germany, Filip De Coninck, Katholieke Universiteit Leuven, Heverlee, Belgium, Krzysztof Mendrok, AGH University of Science & Technology, Krakow, Poland, Paul Sas, PMA, Katholieke Universiteit Leuven, Heverlee, Belgium DETC2005-85633 Coupling Experimental Based Models with Analytical Models in Linear and Nonlinear Dynamics
ASME Biennial 2005 Experimental Identification of a Fractional Derivative Linear Model for Viscoelastic Materials Giuseppe Catania, Silvio Sorrentino, University of Bologna, Bologna, Italy DETC2005-85725 Coupling Experimental Based Models with Analytical Models in Linear and Nonlinear Dynamics
ASME Biennial 2005 A Reduced Order System ID Approach to the Modeling of Nonlinear Structural Behavior in Aeroelasticity Peter Attar, AFRL/VAAC, Wright-Patterson AFB, OH, United States, Earl H. Dowell, Duke University, Durham, NC, United States DETC2005-84309 Nonlinear Dynamics Experimentation and System Identification
ASME Biennial 2005 Experimental Investigation of Targeted Energy Transfers in Strongly and Nonlinearly Coupled Oscillators D. Michael McFarland, University of Illinois at Urbana-Champaign, Urbana, IL, United States, Gaetan Kerschen, University of Liege, Liege, Belgium, Jeffrey Kowtko, Young Lee, University of Illinois at Urbana-Champaign, Urbana, IL, United States, Lawrence A. Bergman, University of Illinois, Urbana, IL, United States, Alexander Vakakis DETC2005-84497 Nonlinear Dynamics Experimentation and System Identification
ASME Biennial 2005 Time-Varying and Non-Linear Dynamical System Identification Using the Hilbert Transform Michael Feldman, Technion - Israel Institute of Technology, Haifa, Israel DETC2005-84644 Nonlinear Dynamics Experimentation and System Identification
ASME Biennial 2005 Parametric Identification of Chaotic Systems via a Long-period Harmonic Balance Yang Liang, Brian Feeny, Michigan State University, East Lansing, MI, United States DETC2005-85032 Nonlinear Dynamics Experimentation and System Identification
ASME Biennial 2005 Free Oscillations of a Beam with a Local Non Linearity: Comparison of Mechanical Modeling and Experiments by Means of Wavelet Analysis Pierre Argoul, Silvano Erlicher, Tien Minh Nguyen, ENPC (LAMI), Marne la Vallée Cedex 2, France DETC2005-85049 Nonlinear Dynamics Experimentation and System Identification
ASME Biennial 2005 Identification and Control of Hysteresis in Rolling Element Guideways Farid Al-Bender, Katholieke Universiteit Leuven, PMA Division, Heverlee (Leuven), Belgium, Wim Symens, FMTC, Heverlee (Leuven), Belgium DETC2005-85246 Nonlinear Dynamics Experimentation and System Identification
ASME Biennial 2005 Remote Machine Monitoring through Internet and Mobile Communication Using XML Wanbin Wang, Peter W.T. Tse, City University of Hong Kong, Hongkong, China DETC2005-84280 Web-, Wireless-, and Mobile-based Monitoring and Engineering Asset Management
ASME Biennial 2005 Effective Architecture for Web-based Maintenance System and Its Security Alan N. L. Cheuk, Peter W. T. Tse, Jacko T. Leung, City University of Hong Kong, Hong Kong, China DETC2005-84645 Web-, Wireless-, and Mobile-based Monitoring and Engineering Asset Management
ASME Biennial 2005 Index-based Performance Assessment and Condition Monitoring of a Mobile Working Machine Vesa Hölttä, Matti Repo, Helsinki University of Technology, Control Engineering Laboratory, Espoo, Finland, Lauri Palmroth, Tampere University of Technology, Institute of Automation and Control, Tampere, Finland, Aki Putkonen, Plustech Oy, Tampere, Finland DETC2005-84844 Web-, Wireless-, and Mobile-based Monitoring and Engineering Asset Management
ASME Biennial 2005 Primary Research of Safety Valve Online Testing Technology Chongzhi Guo, Youhong Wang, Southern China University of Technology, Guangzhou, Guangdong, China DETC2005-85535 Web-, Wireless-, and Mobile-based Monitoring and Engineering Asset Management
ASME Biennial 2005 A Predictive Tool for Remaining Useful Life Estimation of Rotating Machinery Components Haitao Liao, Wichita State University, Wichita, KS, United States, Daming Lin, University of Toronto, Toronto, ON, Canada, Hai Qiu, University of Wisconsin-Milwaukee, Milwaukee, WI, United States, Dragan Banjevic, University of Toronto, Toronto, ON, Canada, Jay Lee, University of Cincinnati, Cincinnati, OH, United States, Andrew Jardine, University of Toronto, Toronto, ON, Canada DETC2005-84095 Web-, Wireless-, and Mobile-based Monitoring and Engineering Asset Management
ASME Biennial 2005 A Case Study in Backlash Characterization in Mechanical Systems Tegoeh Tjahjowidodo, KU Leuven, Leuven, Belgium, Farid Al- Bender, Katholieke Universiteit Leuven, PMA Division, Heverlee (Leuven), Belgium, Prof. Dr. ir. Hendrik Van Brussel, KU Leuven, Leuven, Belgium DETC2005-85013 Nonlinear Dynamics Experimentation and Characterization
ASME Biennial 2005 A Comparison on the Performance of Heuristic Methods of Search for Parameter Characterization of the Bouc/Wen Model of Mechanical Hysteresis Klaus H. Hornig, George Flowers, Auburn University, Auburn, AL, United States DETC2005-84410 Nonlinear Dynamics Experimentation and Characterization
ASME Biennial 2005 Friction-Induced Limit Cycling In Flexible Rotor Systems: An Experimental Drill-String System Nathan van de Wouw, Nenad Mihajlovic, Henk Nijmeijer, Eindhoven University of Technology, Eindhoven, Netherlands DETC2005-84487 Nonlinear Dynamics Experimentation and Characterization
ASME Biennial 2005 Dynamic Analysis of the Nonlinear Behavior of Capacitive MEMS using the Finite Element Formulation Veronique Rochus, Gaetan Kerschen, Jean-Claude Golinval, University of Liege, Liege, Belgium DETC2005-84994 Nonlinear Dynamics Experimentation and Characterization
ASME Biennial 2005 Stability Analysis of Supercavitating Underwater Vehicles (Presentation Only) Seong Sik Ahn, Massimo Ruzzene, Georgia Institute of Technology, Atlanta, GA, United States DETC2005-85009 Nonlinear Dynamics Experimentation and Characterization
ASME Biennial 2005 Reduced-Order Modeling Using Smooth Orthogonal Decomposition (Presentation Only) David Chelidze, Wenliang Zhou, University of Rhode Island, Kingston, RI, United States DETC2005-85145 Nonlinear Dynamics Experimentation and Characterization
ASME Biennial 2005 Full Spectrum Cascade Analysis for Acceleration Signal in Compound Rub Malfunctions Fengqi Wu, Guang Meng, Shanghai Jiaotong University, Shanghai, China DETC2005-84183 Pattern Recognition Techniques
ASME Biennial 2005 Induction Motor Fault Detection and Diagnosis using Artificial Neural Networks Chris K. Mechefske, Lingxin Li, Queen’s University, Kingston, ON, Canada DETC2005-84215 Pattern Recognition Techniques
ASME Biennial 2005 Machine Fault Detection Using Genetic Programming B. Samanta, Sultan Qaboos University, Muscat, Muscat, Oman DETC2005-84642 Pattern Recognition Techniques
ASME Biennial 2005 Vibratory Data Fusion for Gearbox Fault Detection Using Autoassociative Neural Networks Alfonso Fernández, Fernando Viadero, Pablo Garcia, Ramon Sancibrian, University of Cantabria, Santander, Cantabria, Spain DETC2005-85114 Pattern Recognition Techniques
ASME Biennial 2005 Experiment of Oil-Film Whirl in Rotor System and Wavelet Fractal Analyses Qing Kai Han, hongliang Yao, Zhi Wei Zhang, Bang Chun Wen, Northeastern University, Shenyang, Liaoning Province, China DETC2005-85218 Experiments with Nonlinear Dynamic Systems III
ASME Biennial 2005 Experimental Research on Nonlinear Vibration Characteristics of Rotor–bearing System with Coupling Fault of Rub-impact and Oil Whirl Changli Liu, East China University of Science and Technology, Shangai, Shanghai, China, Yimin Zhang, Qing Kai Han, Bangchun Wen, Northeastern University, Shenyang, Liaoning, China DETC2005-85287 Experiments with Nonlinear Dynamic Systems III
ASME Biennial 2007 Analysis of the Elastic Wave Behavior in a Cracked Shaft (Technical Publication) Kelsen LaBerge, Maurice Adams, Case Western Reserve University, Cleveland, OH, United States DETC2007-35305
ASME Biennial 2007 Cracked Rotor Diagnostics Using Soft Computing (Technical Publication) Biswanath Samanta, C. Nataraj, Villanova University, Villanova, PA, United States DETC2007-35181
ASME Biennial 2007 Detection of Carrier-Plate Cracks Using Vibration Spectra (Technical Publication) Romano Patrick, Georgia Tech, Atlanta, GA, United States, Al Ferri, George Vachtsevanos, Georgia Tech, Atlanta, GA, United States DETC2007-35091
ASME Biennial 2007 Bifurcation and Chaos Behavior of Rotor-Bearing System with Crack and Pedestal Looseness Faults (Technical Publication) Yuegang Luo, Songhe Zhang, Dalian Nationalities University, Dalian, China, Feng Wen, Bang Chun Wen, Northeastern University, Shenyang, China DETC2007-34616
ASME Biennial 2007 Interactions Between Backlash and Bearing Clearance Nonlinearity in Geared Flexible Rotors (Technical Publication) N. Ersan Gurkan, H. Nevzat Ozguven, Middle East Technical University, Ankara, Turkey DETC2007-34101
ASME Biennial 2007 Numerical Simulation on the Effects of van der Waals Forces in Micro-rotor Systems (Technical Publication) Jian-Bin Zhou, Guang Meng, Wen-Ming Zhang, Jie-Yu Chen, Shanghai Jiao Tong University, Shanghai, China DETC2007-34355
ASME Biennial 2007 Experimental and Numerical Analysis of Dynamics of the Rotor-Bearing-Seal System (Technical Publication) Shen Xiaoyao, Jing Jianping, Gong Qimiao, Shanghai Jiaotong University, Shanghai, China DETC2007-34374
ASME Biennial 2007 Stability Analysis of Two-Layered Finite Hydrodynamic Porous Journal Bearing Using Linear and Nonlinear Transient Method (Technical Publication) Sashindra Kumar Kakoty, Swarup Kumar Laha, Prasenjit Mallik, Indian Institute of Technology Guwahati, Guwahati, Assam, India DETC2007-34416
ASME Biennial 2007 Dynamic Stress Concentration on a Semiinfinite Piezoelectric Medium with a Circular Cavity near the Surface (Technical Publication) Tianshu Song, Shilong Wang, Harbin Engineering University, Harbin, Heilongjiang, China DETC2007-35232
ASME Biennial 2007 On the Coupling Between Torsional and Lateral Vibrations in a Rotor Dynamic System with Set- Valued Friction (Technical Publication) Nathan van de Wouw, Eindhoven University of Technology, Eindhoven, Netherlands, Nenad Mihajlovic, Philips Research Laboratories, Eindhoven, Netherlands, Henk Nijmeijer, Eindhoven University of Technology, Eindhoven, Netherlands DETC2007-34921
ASME Biennial 2007 The Effect of Surface Waviness and Number of Rolling Elements on the Dynamic Behavior of Rotor-Bearing Systems (Technical Publication) S.P. Harsha, C. Nataraj, Villanova University, Villanova, PA, United States DETC2007-35389
ASME Biennial 2007 Diagnosing Subsynchronous Vibrations: Unstable or Benign (Technical Publication) Vinayaka Rajagopalan, John M. Vance, Texas A&M University, College Station, TX, United States DETC2007-35694
ASME Biennial 2007 Bifurcation Analysis of a One DOF Rotor on Electromagnetic Bearings (Technical Publication) C. Nataraj, Villanova University, Villanova, PA, United States, Steven Marx, Naval Sea Systems Command Philadelphia, Philadephia, PA, United States DETC2007-35721
ASME Biennial 2007 A New Class of Asynchronous Rotordynamic Response in High-Speed Rotors (Technical Publication) Fredric Ehrich, Massachusetts Institute of Technology, Cambridge, MA, United States DETC2007-35912
ASME Biennial 2007 Nonlinear Dynamic Behavior of Turbocharger Rotor-Bearing Systems with Hydrodynamic Oil Film and Squeeze Film Damper in Series: Prediction and Experiment (Technical Publication) Kostandin Gjika, Chris Groves, Honeywell Turbo Technologies, Thaonles- Vosges, France, Luis San Andres, Texas A&M University, College Station, TX, United States, Gerald D. Larue, Honeywell Turbo Technologies, Torrance, CA, United States DETC2007-34136
ASME Biennial 2007 Nonlinear Vibration and Bifurcation Analysis for Rotor-Seal-Bearing Systems of Centrifugal Compressors (Technical Publication) Yuefang Wang, Yong Li, Dalian University of Technology, Dalian, Liaoning, China, Yong Zhang, Shenyang Blowers Works (Group) Co., Shenyang, Liaoning, China, Xiaoyan Wang, Dalian University of Technology, Dalian, Liaoning, China DETC2007-34549
ASME Biennial 2007 Nonlinear Vibration in a Vertical Rigid Rotor Supported by the Magnetic Bearing: Case Considering the Delays of Both Electric Current and Magnetic Flux (Technical Publication) Tsuyoshi Inoue, Nagoya University, Nagoya, Japan, Motoki Sugiyama, Tokai Rika Co, Ltd., Nagoya, Japan, Yasuhiko Sugawara, Yukio Ishida, Nagoya University, Nagoya, Japan DETC2007-34637
ASME Biennial 2007 Nonlinear Dynamic Characterization of Oil-Free Wire Mesh Dampers (Technical Publication) Bugra Ertas, Huageng Luo, GE Global Research Center, Niskayuna, NY, United States DETC2007-34665
ASME Biennial 2007 Chaos Properties of a Rotor System with Nonlinear Hydro-Static Bearings (Technical Publication) Changping Chen, Hunan University, Changsha, China, Liming Dai, University of Regina, Regina, SK, Canada DETC2007-34432
ASME Biennial 2007 Using Acoustic Emission and Vibration Detection to Identify the Rotor-Stator Rubbing (Technical Publication) Liu Zhansheng, Wang Xiao Wei, Dou Wei, Harbin Institute of Technology, Harbin, Heilongjiang,China, China DETC2007-34303
ASME Biennial 2007 Identification of a Rotor Crack in a Gas Turbine Without Twice Per Revolution Symptoms (Technical Publication) Paolo Pennacchi, Andrea Vania, Politecnico di Milano, Milan, MI, Italy DETC2007-34323
ASME Biennial 2007 Development of Beam-To-Beam Contact Detection Algorithms for Rotor-Stator Rubbing Applications (Technical Publication) Sébastien Roques, Ecole Centrale Nantes, Nantes, France, Mathias Legrand, McGill University, Montreal, QC, Canada, Carlo Maria Stoisser, EDF Research and Development, Clamart, France, Patrice Cartraud, Ecole Centrale Nantes, Nantes, France, Christophe Pierre, McGill University, Montreal, QC, Canada DETC2007-34625
ASME Biennial 2007 Vibration Analysis and Detection of Rotor Crack in a Multi-Disk Rotor System by Periodic Excitation Using AMB (Technical Publication) Tsuyoshi Inoue, Nagoya University, Nagoya, Japan, Toshihiro Yamamichi, Sharp Corporation, Osaka, Japan, Masato Kato, Yukio Ishida, Nagoya University, Nagoya, Japan DETC2007-34639
ASME Biennial 2007 Imbalance Detection and Health Monitoring From Gain Variations in an Adaptive Disturbance Rejection Controller (Technical Publication) Kelly Barber, George Flowers, Auburn University, Auburn, AL, United States, Jerry Fausz, United States Air Force Research Laboratory, Kirtland AFB, NM, United States, Alex Matras, Dynamic Concepts Inc., Huntsville, AL, United States, Mark Balas, University of Wyoming, Laramie, WY, United States DETC2007-34517
ASME Biennial 2007 Simulation Investigations of the Effect of a Supporting Structure Defect on the Dynamic State of the Rotor Supported on Slide Bearings (Technical Publication) Grzegorz Zywica, Polish Academy of Sciences, Gdansk, Poland DETC2007-34415
ASME Biennial 2007 Research on Coupling Faults with Oil-Film Instability and Bearing Rub-Impact Based on Reassigned Wavelet Scalogram (Technical Publication) Xiaopeng Li, Hui Ma, Guiqiu Song, Northeastern University, Shenyang, Liaoning, China, Bangchun Wen DETC2007-34546
ASME Biennial 2007 Characteristic Signal Detection Based on Re-scaling Frequency Stochastic Resonance and Its Application in Fault Diagnosis (Technical Publication) Yong-gang Leng, Guo Yan, Dao-Kui Zhou, Tianjin University, Tianjin, China, DETC2007-34987
ASME Biennial 2007 Self-Organising Features of Rotor- Dynamic Faults (Technical Publication) Nalinaksh Vyas, IIT Kanpur, Kanpur, UP, India, Ankur Kumar, Tata Steel Ltd., Chennai, India DETC2007-35922
ASME Biennial 2007 Effect of Misalignment of Retainer Bearings on Dynamic Responses of Rotor System during Emergency Stop (Technical Publication) Antti Y.J. Kärkkäinen, Lappeenranta University of Technology, Lappeenranta, Finland, Marlene Helfert, Darmstadt University of Technology, Darmstadt, Germany, Beat Aeschlimann, MECOS Traxler AG, Winterthur, Switzerland, Aki M. Mikkola, Lappeenranta University of Technology, Lappeenranta, Finland, Jussi T. Sopanen, South Carelia Polytechnic, Lappeenranta, Finland DETC2007-34161
ASME Biennial 2007 The Optimum Design of Hydrodynamic Lubrication Bearing for Minimization of the Total Life Cost (Technical Publication) Takuzo Iwatsubo, Jun Yamabayashi, Kansai University, Suita, Japan DETC2007-34596
ASME Biennial 2007 On the Dynamic Characterization of Flywheel Touchdown Bearing System Design (Technical Publication) Guangyoung Sun, NASA GRC, Cleveland, OH, United States, Ralph Jansen, Kirsten Duffy, University of Toledo/NASA GRC, Cleveland, OH, United States DETC2007-34974
ASME Biennial 2007 A Study of Orifice Compensated Multilobe Hole-Entry Hybrid Journal Bearing (Technical Publication) T Nagaraju, P.E.S. College of Engineering, Mandya, India, J. Sharana Basavaraja, B.M.S. College of Engineering, Bangalore, India, Satish C. Sharma, Indian Institute of Technology Roorkee, Roorkee, Uttrakhand, India, S.C. Jain DETC2007-35923
ASME Biennial 2007 Stability and Stationary Response of A Skew Jeffcott Rotor with Geometric Uncertainty (Technical Publication) Nicolas Driot, LaMCoS, INSA-Lyon, Villeurbanne, France, Alain Berlioz, University of Toulouse, Toulouse, France, Claude Lamarque, Civil Engineering Dept., Vaulx en Velin, France DETC2007-34737
ASME Biennial 2007 Numerical Simulation and Experimental Research on Pedestal Looseness of a Rotor System (Poster) Hui Ma, Hong Liang Yao, Zhao Hui Ren, Feng Wen, Bang Chun Wen, Northeastern University, Shenyang, Liaoning, China DETC2007-34199
ASME Biennial 2007 Simulation and Experiment Analyses on Resonance for a Rotor System with Elastic Supports (Technical Publication) Qing Kai Han, Wang Li, Hong Liang Yao, Northeastern University, Shenyang, China, Bangchun Wen DETC2007-34420
ASME Biennial 2007 Vibration of a Spinning Rotationally Periodic Rotor (Technical Publication) Hyunchul Kim, Steve Shen, University of Washington, Seattle, WA, United States DETC2007-34888
ASME Biennial 2007 Balancing of a Highly Flexible Rotor by Using Artificial Neural Networks (Technical Publication) Manuel Villafane Saldarriaga, Federal University of Uberlandia, Uberlandia, Minas Gerais, Brazil, Jarir Mahfoudh, Laboratoire de Dynamique des Machines et des Structures- INSA de Lyon, Lyon, France, Valder Steffen Jr., Federal University of Uberlandia, Uberlandia, MG, Brazil, Johan Der Hagopian, Laboratoire de Dynamique des Machines et des Structures - INSA de Lyon, Lyon, France DETC2007-34176
ASME Biennial 2007 Practical Balancing of Flexible Rotors for Power Industry (Technical Publication) Zlatan Racic, ZR Consulting, Bradenton, FL, United States, Juan Hidalgo, ReGENco LLC, West Allis, WI, United States DETC2007-34333
ASME Biennial 2007 On the ?Snubbing? Mechanism for Reducing Blade Vibration (Technical Publication) Nicolo Bachschmid, Paolo Pennacchi, Politecnico di Milano, Milan, Italy, Emanuel Pesatori, Franco Tosi Meccanica S.p.A., Milano, Italy, Giorgio Turozzi, R&D - Franco Tosi Meccanica S.p.A., Legnano (MI), Italy DETC2007-34800
ASME Biennial 2007 Vibration Suppression of Rotating Machinery Utilizing an Automatic Ball Balancer and Discontinuous Spring Characteristics (Technical Publication) Jun Liu, Yukio Ishida, Nagoya University, Nagoya, Aichi, Japan DETC2007-34462
ASME Biennial 2007 Suppression of Internal Damping-Induced Instability Using Adaptive Techniques (Technical Publication) Andras Simon, George Flowers, Auburn University, Auburn, AL, United States DETC2007-34187
ASME Biennial 2007 Vibration of the Vertical Rigid Rotor Supported by a Repulsive-Type Magnetic Bearing: Effects of Both the Axial Displacement and the Magnetical Anisotropicities of Magnets (Technical Publication) Tsuyoshi Inoue, Tomohiro Sugai, Yukio Ishida, Nagoya University, Nagoya, Japan DETC2007-35149
ASME Biennial 2007 Active Control of Radial Rotor Vibration in Cage Induction Electrical Machines by a Built-in Force Actuator (Technical Publication) Antti Laiho, VTT Techical Research Center of Finland, Espoo, Espoo, Finland, Andrej Burakov, Helsinki University of Technology, Helsinki, Finland, Kari Tammi, VTT, ESPOO, Finland, Kai Zenger, Antero Arkkio, Helsinki University of Technology, Helsinki, Finland DETC2007-35231
ASME Biennial 2007 Comparison of Active Control Algorithms for Rotor Unbalance Compensation (Technical Publication) Kari Tammi, Antti Laiho, VTT Techical Research Center of Finland, Espoo, Espoo, Finland DETC2007-35253
ASME Biennial 2007 Comparison of Modal Parameter Estimation Techniques for Electromechanical Rotordynamics of Cage Induction Motors (Technical Publication) Timo P. Holopainen, ABB Electrical Machines, Helsinki, Finland, Seppo Aatola, VTT Technical Research Centre of Finland, Espoo, Finland, Hunter Cloud, Guoxin Li, BRG Machinery Consulting, Charlottesville, VA, United States DETC2007-34654
ASME Biennial 2007 Multi-Dimensional Harmonic Balance Applied to Rotor Dynamics (Technical Publication) Mikhail Guskov, Jean-Jacques Sinou, Fabrice Thouverez, Ecole Centrale de Lyon, Ecully Cedex, France DETC2007-34792
ASME Biennial 2007 Dynamical Behavior of a Rotor Under Rotational Random Base Excitation (Technical Publication) Lucie Bachelet, INSA-Lyon, Villeurbanne, France, Nicolas Driot, INSALyon, Villeurbanne, France, Fabrice Poirion, Onera, Chatillon, France, Guy Ferraris, INSA-Lyon, Villeurbanne, France DETC2007-34799
ASME Biennial 2007 Dynamic Investigation on a Pelton Runner: FEM Calculations and Experimental Results (Technical Publication) Emanuel Pesatori, Giorgio Turozzi, Franco Tosi Meccanica S.p.A., Legnano (MI), Italy, Paolo Pennacchi, Alessandro Tosi, Politecnico di Milano, Milano, Italy DETC2007-35219
ASME Biennial 2007 Computational Model for Calculating the Dynamical Behaviour of Generators Caused by Unbalanced Magnetic Pull and Experimental Validation (Technical Publication) Paolo Pennacchi, Politecnico di Milano, Milan, MI, Italy, Lucia Frosini, Università di Pavia, Pavia, PV, Italy DETC2007-35333
ASME Biennial 2007 Thermoelastic Growth of an Auxiliary Bearing Surface Due to Repeated Rotor Dynamic Contact and Rubbing (Technical Publication) Woon Y. Yong, Patrick Keogh, University of Bath, Bath, United Kingdom DETC2007-35214
ASME Biennial 2007 Wavelet Coefficient Characteristics During Rotor/Auxiliary Bearing Contact in Active Magnetic Bearing Systems (Technical Publication) Iain S. Cade, Department of Mechanical Engineering, Bath, Somerset, United Kingdom, Patrick Keogh, Mehmet Sahinkaya, University of Bath, Bath, United Kingdom, Clifford R. Burrows, Department of Mechanical Engineering, Bath, United Kingdom DETC2007-35362
ASME Biennial 2007 Nonlinear Dynamic Response Analysis of Rotor-Ball bearing-Stator Coupling System Including Unbalance-Rubbing Coupling Faults (Technical Publication) Guo Chen, Nanjing University of Aeronautics and Astronautics, Nanjing, Jiangsu, China, Rong Tao Hou, Nanjing University of Science and Technology, Nanjing, Jiangsu, China DETC2007-34186
ASME Biennial 2007 Study of Component Mode Synthesis Methods in a Rotor-Stator Interaction Case (Technical Publication) Alain Batailly, Patrice Cartraud, Ecole Centrale de Nantes, Nantes, France, Mathias Legrand, Christophe Pierre, McGill University, Montreal, QC, Canada, Jean-Pierre Lombard, Snecma (Safran group), Moissy-Cramayel, France DETC2007-34781
ASME Biennial 2009 On the Monitoring and Diagnosis of Assembly Faults in Diesel Engine Cold Tests: A Case Study Simone Delvecchio, Gianluca D’Elia, Raffaele Di Gregorio, and Emiliano Mucchi DETC2009-86264 Condition Monitoring and Diagnosis
ASME Biennial 2009 Fault Diagnosis of Rotating Machinery Due to Clearance Using Hilbert-Huang Transform Yeon-Sun Choi DETC2009-86332 Condition Monitoring and Diagnosis
ASME Biennial 2009 The Revelation of Propagating Ultrasonic Guided Waves Through Simulation When They Encountered Defects in a Pipe P. Tse, S. Tang, and X. Wang DETC2009-86380 Condition Monitoring and Diagnosis
ASME Biennial 2009 Classification of Delamination and Matrix Cracking in Carbon Fibre Composite Plates Using Acoustic Emission (AE) Dirk Aljets, Alex Chong, Steven Wilcox, Karen Holford, Rhys Pullin, and Mark Eaton DETC2009-86414 Condition Monitoring and Diagnosis
ASME Biennial 2009 Parameter Identification of a Cantilever Beam Immersed in Viscous Fluids With Potential Applications to the Probe Calibration of Atomic Force Microscopes Wenlung Li and S. P. Tseng DETC2009-86415 Condition Monitoring and Diagnosis
ASME Biennial 2009 Automatic Condition Monitoring and Early Fault Detection of Gearbox Dong Wang, Qiang Miao, Chengdong Wang, and Jingqi Xiong DETC2009-86469 Condition Monitoring and Diagnosis
ASME Biennial 2009 A Novel Real Time Diagnostic Method for Crack Detection on a Rotating Shaft Fernando A. Bejarano, Amilcar A. Rincon, Yamil Camacho, and Xaymara Perereira DETC2009-86571 Condition Monitoring and Diagnosis
ASME Biennial 2009 An Efficient Diagnosis Technique for Variations of Shaft-Bow and Unbalance Tachung Yang and Ming-Wei Hsu DETC2009-86711 Condition Monitoring and Diagnosis
ASME Biennial 2009 Analysis of Acoustic Wave Due to Gas Leakage in Buried Gas Pipe Eui Youl Kim, Sang Kwon Lee, and Min Soo Kim DETC2009-86743 Condition Monitoring and Diagnosis
ASME Biennial 2009 Development of the Sound Metric for the Impact Sound of a Car Using Wavelet Transform Eun Woo Na, Sang Kwon Lee, and Ho-Wuk Kim DETC2009-86757 Condition Monitoring and Diagnosis
ASME Biennial 2009 Rotating Machinery Fault Detection Using EEMD and Bispectrum Yaguo Lei, Ming J. Zuo, and Mohammad Hoseini DETC2009-86794 Condition Monitoring and Diagnosis
ASME Biennial 2009 Vibration-Based Fault Diagnosis of Slurry Pump Using Neighborhood Rough Set Model Xiaomin Zhao, Qinghua Hu, Yaguo Lei, and Ming J. Zuo DETC2009-86797 Condition Monitoring and Diagnosis
ASME Biennial 2009 Engineering System Fault Detection Using Particle Filters B. Samanta DETC2009-86809 Condition Monitoring and Diagnosis
ASME Biennial 2009 Torsional Vibration Analysis and Stress Calculation for the Fault 600MW Steam Turbine Generator Shaft System Dongxiang Jiang, Liangyou Hong, Zheng Wang, and Xiaorong Xie DETC2009-86854 Condition Monitoring and Diagnosis
ASME Biennial 2009 Bearing Fault Diagnosis Based on Embedded Multiple Sensors Yimin Shao, Chris K. Mechefske, Liang Ge, and Jieping Fang DETC2009-86856 Condition Monitoring and Diagnosis
ASME Biennial 2009 Condition Monitoring and Diagnostics in Heavy-Duty Wheels: A First Experimental Approach Marco Malagò, Emiliano Mucchi, and Giorgio Dalpiaz DETC2009-87333 Condition Monitoring and Diagnosis
ASME Biennial 2009 Rolling Element Bearing Fault Classification Using K-Means Frequency Domain Based Clustering Christos Yiakopoulos, Ioannis Antoniadis, and Konstantinos Gryllias DETC2009-87369 Condition Monitoring and Diagnosis
ASME Biennial 2009 Modal Sensitivities, Spatial Signal Distribution and Average of Segmented Ring Sensors Y. S. Lin, C. C. Chang, C. C. Chu, and H. S. Tzou DETC2009-87411 Condition Monitoring and Diagnosis
ASME Biennial 2009 Integrated Cut Performance and Sample Inspection System for Microtome Setup Evaluation Daniel Brisach, James Glancey, Justin Alms, and Nate Cloud DETC2009-87521 Condition Monitoring and Diagnosis
ASME Biennial 2009 Adaptive Angular-Velocity Vold-Kalman Order Tracking Used in Characterizing Dynamic Signals Measured From Rotary Machines Min-Chun Pan and Wei-Chen Chu DETC2009-87691 Condition Monitoring and Diagnosis
ASME Biennial 2009 Induction Motor Multi-Fault Analysis Based on Intrinsic Mode Functions in Hilbert-Huang Transform Xin Xue and V. Sundararajan DETC2009-87833 Condition Monitoring and Diagnosis
ASME Biennial 2009 Shape Optimization of Multi-Chamber Mufflers With Plug-Inlet Tube on a Venting Process by Genetic Algorithms Min-Chie Chiu DETC2009-86092 Coupling Experimental Based Models With Analytical Models in Linear and Nonlinear Dynamics
ASME Biennial 2009 A Coupled Theoretical-Experimental Dynamical Model for Chatter Prediction in Milling Processes Giuseppe Catania and Nicolò Mancinelli DETC2009-86216 Coupling Experimental Based Models With Analytical Models in Linear and Nonlinear Dynamics
ASME Biennial 2009 Rayleigh-Ritz Analysis of Vibrating Plates Based on a Class of Eigenfunctions Giuseppe Catania and Silvio Sorrentino DETC2009-86262 Coupling Experimental Based Models With Analytical Models in Linear and Nonlinear Dynamics
ASME Biennial 2009 An Analytical Model for Force Estimation on Arms of Concrete Mixers Luca Landi and Claudio Braccesi DETC2009-86621 Coupling Experimental Based Models With Analytical Models in Linear and Nonlinear Dynamics
ASME Biennial 2009 PB-Spline Hybrid Surface Fitting Technique Antonio Carminelli and Giuseppe Catania DETC2009-87195 Coupling Experimental Based Models With Analytical Models in Linear and Nonlinear Dynamics
ASME Biennial 2009 PB-Spline Finite Element Shell Modeling and Refinement Technique Antonio Carminelli and Giuseppe Catania DETC2009-87232 Coupling Experimental Based Models With Analytical Models in Linear and Nonlinear Dynamics
ASME Biennial 2009 A Model of Force Generation by Locust Skeletal Muscle in Response to Individual Stimuli Emma Wilson, Emiliano Rustighi, Philip L. Newland, and Brian R. Mace DETC2009-86620 Dynamics and Control of Bio-Systems
ASME Biennial 2009 Intrinsic Mode Decomposition of Physiological Signals for Feature Extraction B. Samanta and C. Nataraj DETC2009-86806 Dynamics and Control of Bio-Systems
ASME Biennial 2009 A Matlab/Simulink Model of the Inner Ear Angular Accelerometers Sensors Pierre Selva, Joseph Morlier, and Yves Gourinat DETC2009-87166 Dynamics and Control of Bio-Systems
ASME Biennial 2009 Complex Modal Decomposition Applied to Nematode Posturing B. F. Feeny, P. W. Sternberg, and C. J. Cronin DETC2009-87800 Dynamics and Control of Bio-Systems
ASME Biennial 2009 Wave Propagation in Two-Dimensional Nonlinear Periodic Lattices Raj K. Narisetti, Massimo Ruzzene, and Michael J. Leamy DETC2009-86279 Dynamics of Band-Gap Materials and Structures
ASME Biennial 2009 Nonlinear Periodic Systems: Bands and Localization Alexander Vakakis DETC2009-87315 Dynamics of Band-Gap Materials and Structures
ASME Biennial 2009 An Experimental Investigation of Acoustic Band Gaps and Localization in Granular Elastic Chains Nicholas Boechler and Chiara Daraio DETC2009-87427 Dynamics of Band-Gap Materials and Structures
ASME Biennial 2009 Vibration Isolation Via Linear and Nonlinear Periodic Devices A. Spadoni and C. Daraio DETC2009-87620 Dynamics of Band-Gap Materials and Structures
ASME Biennial 2009 A Three-Dimensional Lumped Parameter Model of Nanoscale Phononic Crystals Bruce L. Davis and Mahmoud I. Hussein DETC2009-87674 Dynamics of Band-Gap Materials and Structures
ASME Biennial 2009 Control Concepts of Semi-Active Friction Dampers Lothar Gaul and Jens Becker DETC2009-86166 Dynamics of Mechanical Systems With Contact and Friction
ASME Biennial 2009 Effects of Rolling Friction on Ball Positioning for an Automatic Ball Balancer T. C. Chan, C. K. Sung, Paul C. P. Chao, and Y. M. Hung DETC2009-86379 Dynamics of Mechanical Systems With Contact and Friction
ASME Biennial 2009 Stick-Slip Dynamics in Ultrasonic Consolidation James M. Gibert, Daniel T. McCullough, Georges M. Fadel, Eric M. Austin, and Grant K. M. Martin DETC2009-86527 Dynamics of Mechanical Systems With Contact and Friction
ASME Biennial 2009 Design of Limit-Switch Sensors Based on Discontinuity-Induced Nonlinearities Bryan Wilcox and Harry Dankowicz DETC2009-86560 Dynamics of Mechanical Systems With Contact and Friction
ASME Biennial 2009 Dynamics of a Cleaning Blade Based on a 2DOF Link Model Yoshinori Inagaki, Tsuyoshi Nohara, Go Kono, Minoru Kasama, and Masatsugu Yoshizawa DETC2009-86821 Dynamics of Mechanical Systems With Contact and Friction
ASME Biennial 2009 Damping Performance of a Particle Damper in Two Dimensions Riaz A. Bhatti and Wang Yanrong DETC2009-86862 Dynamics of Mechanical Systems With Contact and Friction
ASME Biennial 2009 Features of Early Crack in a Gear Based on a 16DOF Nonlinear Time-Varying Stiffness Dynamic Model Xiaojun Zhou, Yimin Shao, and Ming J. Zuo DETC2009-86999 Dynamics of Mechanical Systems With Contact and Friction
ASME Biennial 2009 Dynamic Analysis of Structures With Nonlinear Bolted Joints by Using an Adaptive Harmonic Balance Method Vincent Jaumouillé and Jean-Jacques Sinou DETC2009-87162 Dynamics of Mechanical Systems With Contact and Friction
ASME Biennial 2009 Vibration Damping in Bolted Friction Beam-Columns Hadjila Bournine, David J. Wagg, and Simon Neild DETC2009-87184 Dynamics of Mechanical Systems With Contact and Friction
ASME Biennial 2009 The Effect of Thermo-Hydrodynamics on Manual Automotive Transmissions Gear Rattle Miguel De la Cruz, Stephanos Theodossiades, Homer Rahnejat, and Patrick Kelly DETC2009-87226 Dynamics of Mechanical Systems With Contact and Friction
ASME Biennial 2009 Design Procedure of a Nonlinear Vibration Absorber Using Bifurcation Analysis: Application to the Drill-String System Régis Viguié and Gaëtan Kerschen DETC2009-87358 Dynamics of Mechanical Systems With Contact and Friction
ASME Biennial 2009 Application of the Energy Operator Separation Algorithm (EOSA) for the Instantaneous Amplitude and Frequency Calculation of Nonlinear Dynamic Systems Response Konstantinos Gryllias and Ioannis Antoniadis DETC2009-87375 Dynamics of Mechanical Systems With Contact and Friction
ASME Biennial 2009 Nonlinear Modal Analysis of Mechanical Systems With Frictionless Contact Interfaces Denis Laxalde, Mathias Legrand, and Christophe Pierre DETC2009-87387 Dynamics of Mechanical Systems With Contact and Friction
ASME Biennial 2009 Contact Dynamics With Onset of Plasticity in Probing Nanoscale Thin Solid Films by AFM and Nanoindentation Xiaoling He DETC2009-87646 Dynamics of Mechanical Systems With Contact and Friction
ASME Biennial 2009 Dynamic Analysis of a Motion Transformer Mimicking a Hula Hoop C. X. Lu, C. C. Wang, C. K. Sung, and Paul C. P. Chao DETC2009-86378 Energy Harvesting and Scavenging
ASME Biennial 2009 Energy Harvesting From an Impulsive Load With Essential Nonlinearities Angela Triplett, Dane Quinn, Alexander F. Vakakis, and Lawrence A. Bergman DETC2009-86669 Energy Harvesting and Scavenging
ASME Biennial 2009 Energy Harvesting From Vibrations With a Nonlinear Oscillator David A. W. Barton, Stephen G. Burrow, and Lindsay R. Clare DETC2009-86841 Energy Harvesting and Scavenging
ASME Biennial 2009 Transfer Function Modeling of Distributed Piezoelectric Vibration Energy Harvesters Chin An Tan and Heather L. Lai DETC2009-86853 Energy Harvesting and Scavenging
ASME Biennial 2009 Harvesting Energy From the Nonlinear Oscillations of a Bistable Piezoelectric Inertial Energy Generator Samuel C. Stanton and Brian P. Mann DETC2009-86902 Energy Harvesting and Scavenging
ASME Biennial 2009 New Insight Into Energy Harvesting Via Axially-Loaded Beams Mohammed F. Daqaq DETC2009-86974 Energy Harvesting and Scavenging
ASME Biennial 2009 Influence of Power Conditioning on the Optimization of Energy Harvesting Systems Stephen G. Burrow and Lindsay R. Clare DETC2009-87028 Energy Harvesting and Scavenging
ASME Biennial 2009 Reduced-Order Modeling of Energy Harvesters Thiago Seuaciuc-Osório and Mohammed F. Daqaq DETC2009-87287 Energy Harvesting and Scavenging
ASME Biennial 2009 Energy Harvesting by Vibrations With MEMS Piezoelectric Benders Changki Mo, Ryan R. Knight, Amanda A. Frederick, and William W. Clark DETC2009-87309 Energy Harvesting and Scavenging
ASME Biennial 2009 Segment-Type Energy Harvester Powering Wireless Sensor for Building Automation Soobum Lee, Byeng D. Youn, and Byungchang Jung DETC2009-87436 Energy Harvesting and Scavenging
ASME Biennial 2009 Optimal Energy Harvesting From Low-Frequency Bistate Force Loadings Jeff T. Scruggs and Sam Behrens DETC2009-87632 Energy Harvesting and Scavenging
ASME Biennial 2009 Effect of Material Constants and Mechanical Damping on Piezoelectric Power Generation Alper Erturk, Steven R. Anton, Onur Bilgen, and Daniel J. Inman DETC2009-87659 Energy Harvesting and Scavenging
ASME Biennial 2009 Electromechanical Modeling of the Low Frequency MEMS Energy Harvester M. Amin Karami and Daniel J. Inman DETC2009-87710 Energy Harvesting and Scavenging
ASME Biennial 2009 Circuit Optimization and Vibration Analysis of Electromagnetic Energy Harvesting Systems Lei Zuo and Xiudong Tang DETC2009-87728 Energy Harvesting and Scavenging
ASME Biennial 2009 Middleware Design for Energy Harvester of Wireless Sensor Nodes Zhenhuan Zhu, S. Olutunde Oyadiji, and Samir Mekid DETC2009-87810 Energy Harvesting and Scavenging
ASME Biennial 2009 Thermal Effects on Geometrically Nonlinear Vibrations of Rectangular Plates With Fixed Ends M. Amabili and S. Carra DETC2009-86113 Experimental Nonlinear Dynamics and System ID
ASME Biennial 2009 Effect of Weight on the Experimental Modal Analysis of Slender Cantilever Beams Lawrence Virgin and David Holland DETC2009-86149 Experimental Nonlinear Dynamics and System ID
ASME Biennial 2009 Modal Analysis With Smooth Karhunen-Loève Decomposition S. Bellizzi and Rubens Sampaio DETC2009-86235 Experimental Nonlinear Dynamics and System ID
ASME Biennial 2009 Experimental Study on the Nonlinear Vibration Response of Cone-Shaped Spring Isolator Shu-Yong Liu, Shij-Ian Zhu, Qi-Wei He, and Zhen-Hai Zhang DETC2009-86329 Experimental Nonlinear Dynamics and System ID
ASME Biennial 2009 Theoretical and Experimental Investigations of Nonlinear Vibrations for a Beam Structure Dong-xing Cao, Wei Zhang, Ming-hui Yao, and Qian Wang DETC2009-86375 Experimental Nonlinear Dynamics and System ID
ASME Biennial 2009 Interaction Between In-Plane and Out-Of-Plane Cable Modes for a Cable-Deck System Maria R. Marsico, Simon A. Neild, Alicia Gonzalez-Buelga, and David J. Wagg DETC2009-86590 Experimental Nonlinear Dynamics and System ID
ASME Biennial 2009 Development of Experimental Chaos Identification Analysis System Liu Shuyong, Yang Qingchao, and Diao Aiming DETC2009-86633 Experimental Nonlinear Dynamics and System ID
ASME Biennial 2009 An Experimental Investigation of State-Variable Modal Decomposition Method for Modal Analysis Umar Farooq and Brian F. Feeny DETC2009-87060 Experimental Nonlinear Dynamics and System ID
ASME Biennial 2009 Analysis of Vibro-Impact Dynamical System Using Piecewise Linear Vector Fields Mikio Nakai DETC2009-87176 Experimental Nonlinear Dynamics and System ID
ASME Biennial 2009 Experimental Evaluation of Nonlinear Dynamics and Coupled Motions in a Pantograph Pia Harèll Poznic, Jenny Jerrelind, and Lars Drugge DETC2009-87246 Experimental Nonlinear Dynamics and System ID
ASME Biennial 2009 Modal Testing of Nonlinear Vibrating Structures Based on a Nonlinear Extension of Force Appropriation M. Peeters, G. Kerschen, and J. C. Golinval DETC2009-87321 Experimental Nonlinear Dynamics and System ID
ASME Biennial 2009 On Combined Use of POD Modes and Ritz Vectors for Model Reduction in Nonlinear Structural Dynamics Nishant Kumar and Thomas D. Burton DETC2009-87416 Experimental Nonlinear Dynamics and System ID
ASME Biennial 2009 Estimation of States and Parameters in Chaotic Systems Using Particle Swarm Optimization B. Samanta and C. Batarah DETC2009-87535 Experimental Nonlinear Dynamics and System ID
ASME Biennial 2009 Correspondence Between Intrinsic Mode Functions and Slow Flows Young S. Lee, Stylianos Tsakirtzis, Alexander F. Vakakis, Lawrence A. Bergman, and D. Michael McFarland DETC2009-87588 Experimental Nonlinear Dynamics and System ID
ASME Biennial 2009 Concealed Weapon Detection Using Acoustic Spectral Characterisation George A. Vadakkel and S. Olutunde Oyadiji DETC2009-87629 Experimental Nonlinear Dynamics and System ID
ASME Biennial 2009 A Shape Function-Based Updating Parameters Selection Method for Long-Span Bridges Gang Liu, Zongming Huang, Yimin Shao, and Shangbin Weng DETC2009-86143 Finite Element Modeling, Modal Testing, Model Updating, and Structural Damage Detection
ASME Biennial 2009 Random Loads Fatigue—The Simulation of Non-Linear Systems Filippo Cianetti and Claudio Braccesi DETC2009-86251 Finite Element Modeling, Modal Testing, Model Updating, and Structural Damage Detection
ASME Biennial 2009 FEA Study of Belt Angle Effect to Tire Cornering Stiffness and Ply Steer Min Lu DETC2009-86267 Finite Element Modeling, Modal Testing, Model Updating, and Structural Damage Detection
ASME Biennial 2009 Damage Identification Through Spectral Element Model Updating Mustafa H. Arafa and Ashraf O. Nassef DETC2009-86418 Finite Element Modeling, Modal Testing, Model Updating, and Structural Damage Detection
ASME Biennial 2009 Fluid Added Mass Effect in the Modal Response of a Pump-Turbine Impeller Eduard Egusquiza, Carme Valero, Miguel Coussirat, Quanwei Liang, and Ulrich Seidel DETC2009-86830 Finite Element Modeling, Modal Testing, Model Updating, and Structural Damage Detection
ASME Biennial 2009 A SEA Model for the Noise Analysis and Prediction of a Vacuum Cleaner Lifang Yang and Zhiyong Long DETC2009-87256 Finite Element Modeling, Modal Testing, Model Updating, and Structural Damage Detection
ASME Biennial 2009 Modeling of Dynamic Interaction Between Gun System Components During the Recoil Motion of the Gun Nadeem Ahmed, R. D. Brown, and J. G. Hetherington DETC2009-87292 Finite Element Modeling, Modal Testing, Model Updating, and Structural Damage Detection
ASME Biennial 2009 Periodic Steady State Response and Fatigue Analysis of a Nonlinear City Bus Model George Valsamos, Christos Theodosiou, and Sotirios Natsiavas DETC2009-87320 Finite Element Modeling, Modal Testing, Model Updating, and Structural Damage Detection
ASME Biennial 2009 Experimental Guidelines for NVH Improvements in Helicopter Vibro-Acoustic Comfort Emiliano Mucchi, Elena Pierro, and Antonio Vecchio DETC2009-87383 Finite Element Modeling, Modal Testing, Model Updating, and Structural Damage Detection
ASME Biennial 2009 Response-Only Frequency-Domain Method for Structural Damage Detection Shuncong Zhong and S. Olutunde Oyadiji DETC2009-87650 Finite Element Modeling, Modal Testing, Model Updating, and Structural Damage Detection
ASME Biennial 2009 Resonance Frequency Detection of Dental Implant Stability With Various Bone Defects: In-Vitro Experiments H.-B. Zhuang, M.-Ch. Pan, Ch.-S. Chen, and S.-Y. Lee DETC2009-87744 Finite Element Modeling, Modal Testing, Model Updating, and Structural Damage Detection
ASME Biennial 2009 Improvement of Degeneracy for Hybrid Transducer Yung Ting, Le Ba Tan, Gunawan Hariyanto, Bing-Kuan Hou, Lang Van Thang, Cheng-Yu Chen, and Tran Thai Son DETC2009-87753 Finite Element Modeling, Modal Testing, Model Updating, and Structural Damage Detection
ASME Biennial 2009 Finite Element Modeling of Structures With L-Shaped Beams and Bolted Joints: Model Updating and Predictive Modeling Approaches K. He and W. D. Zhu DETC2009-87811 Finite Element Modeling, Modal Testing, Model Updating, and Structural Damage Detection
ASME Biennial 2009 Experimental Impact of a Pendulum With the Sand Dan B. Marghitu and Seunghun Lee DETC2009-87845 Machinery and Device Vibration
ASME Biennial 2009 Damping Enhancement in Printed Circuit Boards With Potting Materials or Microfibrous Metallic Cloth Robert Dean, Nesha Hyatt, Russ Garner, Brian Grantham, George Flowers, and Meagan Black DETC2009-87846 Machinery and Device Vibration
ASME Biennial 2009 Review of Recent Developments in Composite Materials for Aerospace Applications Bruce Shue, George Flowers, and Alfonso Moreira DETC2009-87847 Machinery and Device Vibration
ASME Biennial 2009 A Study on Vibration-Induced Fretting Degradation in Connector Systems Chen Chen, George T. Flowers, Michael Bozack, and Jeffrey Suhling DETC2009-87848 Machinery and Device Vibration
ASME Biennial 2009 Influence of Quantifiable Extrinsic Stresses on Tin Whisker Growth Chad L. Rodekohr, George T. Flowers, Michael J. Bozack, Robert N. Dean, Robert L. Jackson, and Pradeep Lall DETC2009-87849 Machinery and Device Vibration
ASME Biennial 2009 MEMS Gyroscopes Susceptibility to High Frequency Acoustic Noise Grant Roth, George T. Flowers, and Robert Dean DETC2009-87854 Machinery and Device Vibration
ASME Biennial 2009 Simplified Analysis Strategies for Fluid-Structure Interaction in High Speed Turbomachinery Brittany Consuegra and George T. Flowers DETC2009-87855 Machinery and Device Vibration
ASME Biennial 2009 Resonance Suppression in Multi-DOF Rotating Flexible Structures Using Order-Tuned Absorbers Serif Gozen, Brian J. Olson, Christophe Pierre, and Steven W. Shaw DETC2009-86287 Nonlinear Mechanisms in Bladed Disk Assemblies
ASME Biennial 2009 Influence of Thermal Effects During Blade-Casing Contact Experiments Antoine Millecamps, Philippe Dufrénoy, Jean-François Brunel, François Garcin, and Marco Nucci DETC2009-86842 Nonlinear Mechanisms in Bladed Disk Assemblies
ASME Biennial 2009 Evaluation of Component Mode Synthesis Methods for the Detection of Modal Interaction Through Rotor Stator Contacts Alain Batailly, Mathias Legrand, Patrice Cartraud, Christophe Pierre, and Jean-Pierre Lombard DETC2009-87036 Nonlinear Mechanisms in Bladed Disk Assemblies
ASME Biennial 2009 An Approach on Bladed-Disc Tuning Loc Duong, Kazem Kazerounian, and Kevin D. Murphy DETC2009-87325 Nonlinear Mechanisms in Bladed Disk Assemblies
ASME Biennial 2009 Damping Material Characterization and Modeling: An Industrial Case-Study Fabien Poncelet, Bruno Bernay, Gaetan Kerschen, and Jean-Claude Golinval DETC2009-87342 Nonlinear Mechanisms in Bladed Disk Assemblies
ASME Biennial 2009 Component Mode Synthesis Method Using Partial Interface Modes—Application to Tuned and Mistuned Bladed Disk With Local Non-Linearity Duc-Minh Tran DETC2009-87353 Nonlinear Mechanisms in Bladed Disk Assemblies
ASME Biennial 2009 A Substructure Based Reduced Order Model for Mistuned Bladed Disks Andreas Hohl, Christian Siewert, Lars Panning, and Jörg Wallaschek DETC2009-87459 Nonlinear Mechanisms in Bladed Disk Assemblies
ASME Biennial 2009 Numerical Investigation of Abradable Coating Wear Through Plastic Constitutive Law: Application to Aircraft Engines Mathias Legrand and Christophe Pierre DETC2009-87669 Nonlinear Mechanisms in Bladed Disk Assemblies
ASME Biennial 2009 A Theory for Nonlinear Webs Albert C. J. Luo DETC2009-86192 Nonlinear Vibration With Optimization Approaches
ASME Biennial 2009 Nonlinear Oscillation and Stability Analysis of the Turning Process With a Worn Tool Hamed Moradi, Mohammad T. Ahmadian, and Firooz Bakhtiari-Nejad DETC2009-86250 Nonlinear Vibration With Optimization Approaches
ASME Biennial 2009 Nonlinear Dynamic Modeling of Elastic Beam Fixed on a Moving Cart and Carrying Lumped Tip Mass Subjected to External Periodic Force Fadi A. Ghaith DETC2009-86318 Nonlinear Vibration With Optimization Approaches
ASME Biennial 2009 Vibratory Mobilization of Two-Phase Liquid Trapped in Capillary Gang Cheng and Liming Dai DETC2009-87021 Nonlinear Vibration With Optimization Approaches
ASME Biennial 2009 Analytical Approach on Nonlinear Vibration and Wave Response of Saturated Porous Media Subjected to Multiple Excitations Liming Dai and Guoqing Wang DETC2009-87022 Nonlinear Vibration With Optimization Approaches
ASME Biennial 2009 Periodic Solutions for Coupled Van Der Pol Oscillators of Two-Degree-Of-Freedom Solved by Homotopy Analysis Method Wei Zhang, Youhua Qian, and Qian Wang DETC2009-87135 Nonlinear Vibration With Optimization Approaches
ASME Biennial 2009 Bifurcation and Stability of the Periodic Motion of a Rotor Bearing System With Pedestal Looseness and Rub-Impact Changli Liu, Xiuli Zhang, Li Cui, Pengru Xie, and Jianrong Zheng DETC2009-86079 Rotor Dynamics
ASME Biennial 2009 Study on Nonlinear Vibration and Dynamic Characteristics of Rigid Rotor Roller Bearing System Li Cui, Changli Liu, and Jianrong Zheng DETC2009-86161 Rotor Dynamics
ASME Biennial 2009 Vibration Analysis of an Unbalanced Rotating Shaft Due to Ball Waviness S. H. Upadhyay, S. C. Jain, and S. P. Harsha DETC2009-86272 Rotor Dynamics
ASME Biennial 2009 Diagnosis and Treatment of Bowed, Misalign, and Eccentric Rotor Trains Juan Hidalgo and Zlatan Racic DETC2009-86307 Rotor Dynamics
ASME Biennial 2009 Active Self-Excited Vibration Elimination of Rotating Machine With an Electromagnetic Exciter Chen-Chao Fan and Min-Chun Fan DETC2009-86405 Rotor Dynamics
ASME Biennial 2009 Simple Electromagnetic Force Model for Industrial Rotordynamic Analyses of Electrical Machines Timo P. Holopainen DETC2009-86468 Rotor Dynamics
ASME Biennial 2009 A New Method for the Dynamic Analysis of Pelton Runners Using CFD/FEM Interaction Massimiliano Sanvito, Luisa Coscarelli, Emanuel Pesatori, Giorgio Turozzi, and Paolo Pennacchi DETC2009-86472 Rotor Dynamics
ASME Biennial 2009 Model Based Analysis of Steam-Whip Instability Onsets Occurred in a Power Plant Paolo Pennacchi and Andrea Vania DETC2009-86474 Rotor Dynamics
ASME Biennial 2009 Application of Robust Regression Methods to Rotor Balancing Using High Breakdown Point and Bounded-Influence Estimators Paolo Pennacchi, Andrea Vania, and Steven Chatterton DETC2009-86475 Rotor Dynamics
ASME Biennial 2009 Updating of the Torsional Model of a Steam Turbo Generator Roberto Ricci, Paolo Pennacchi, Emanuel Pesatori, and Giorgio Turozzi DETC2009-86553 Rotor Dynamics
ASME Biennial 2009 Calculation of Polynomial Curves for Speed-Dependent Bearing Coefficients Tachung Yang and Kai-Shang Lin DETC2009-86567 Rotor Dynamics
ASME Biennial 2009 Adaptive Disturbance Rejection and Stabilization for Rotor Systems With Internal Damping András Simon and George T. Flowers DETC2009-86610 Rotor Dynamics
ASME Biennial 2009 Fault Feature Analysis of Rotor System With Looseness Fault Hui Ma, Wei Sun, Jishuang Dai, Bangchun Wen, and Zongyan Wang DETC2009-86647 Rotor Dynamics
ASME Biennial 2009 Stability Analysis of a Cracked Rotor With Several Degrees of Freedom Roberto Ricci and Paolo Pennacchi DETC2009-86764 Rotor Dynamics
ASME Biennial 2009 Analysis of a Worn Multirecess Hydrostatic Journal Bearing System Kumar E. Vijaya, Vikas M. Phalle, Satish C. Sharma, and S. C. Jain DETC2009-86787 Rotor Dynamics
ASME Biennial 2009 Nonlinear Dynamics Characteristic of Rotor-Bearing System by a Finite Element Model Chaofeng Li, Zhaohui Ren, Xiapeng Li, and Bangchun Wen DETC2009-86813 Rotor Dynamics
ASME Biennial 2009 Vibration Analysis of the Self-Excited Vibration in the Rotor System Due to Ball Balancer Tsuyoshi Inoue, Hideaki Niimi, and Yukio Ishida DETC2009-86896 Rotor Dynamics
ASME Biennial 2009 FEM Modelling and Experimental Verification of a Rotor System With a Open Crack Tsuyoshi Inoue, Nobuhiro Nagata, and Yukio Ishida DETC2009-86898 Rotor Dynamics
ASME Biennial 2009 Dynamic Characteristics of Nonlinear Elastics Rotor-Bearing System With Coupling Faults of Pedestal Looseness and Rub-Impact Yuegang Luo, Songhe Zhang, Zhaohui Ren, and Bangchun Wen DETC2009-86913 Rotor Dynamics
ASME Biennial 2009 Fault Diagnosis of Ball Bearings Using Soft Computing Kalyan M. Bhavaraju, P. K. Kankar, Satish C. Sharma, and S. P. Harsha DETC2009-86926 Rotor Dynamics
ASME Biennial 2009 Imbalances in High Precision Cutting Machinery Jenny Niebsch and Ronny Ramlau DETC2009-86937 Rotor Dynamics
ASME Biennial 2009 Ann Based Fault Classification of High Speed Ball Bearings Aashish Bhatnagar, P. K. Kankar, Satish C. Sharma, and S. P. Harsha DETC2009-87016 Rotor Dynamics
ASME Biennial 2009 Vibration Signature Analysis of a Rotor Bearing System Using Response Surface Method P. K. Kankar, Satish C. Sharma, and S. P. Harsha DETC2009-87018 Rotor Dynamics
ASME Biennial 2009 Modeling and Torsional Vibration Analysis of an Engine Cold-Test Cell for Structural Reliability and Engine Assembly Defect Diagnostics Kamran A. Gul, Douglas E. Adams, and Nasir Bilal DETC2009-87020 Rotor Dynamics
ASME Biennial 2009 Introduction of Model-Based Identification Methods Applied to Rotating Machinery of Électricité de France Roberto Ricci, Paolo Pennacchi, Franck Meissonnier, Ionel Nistor, Carlo Maria Stoisser, and Philippe Voinis DETC2009-87146 Rotor Dynamics
ASME Biennial 2009 Dynamic Analysis of Ball Bearings Due to Clearance Effect S. H. Upadhyay, S. C. Jain, and S. P. Harsha DETC2009-87147 Rotor Dynamics
ASME Biennial 2009 Intermittent Chaotic Dynamics of Rail Axle Supported by Roller Bearings S. P. Harsha and C. ‘Nat’ Nataraj DETC2009-87183 Rotor Dynamics
ASME Biennial 2009 Analysis of Unbalanced Magnetic Pull Calculation in Generators With Two Pole Pairs Lucia Frosini, Paolo Pennacchi, and Carlo Maria Stoisser DETC2009-87194 Rotor Dynamics
ASME Biennial 2009 Instantaneous Frequency Estimation in Rotating Machinery Using a Harmonic Signal Decomposition (HARD) Parametric Method Ioannis Antoniadis, Christos Yiakopoulos, and Konstantinos Gryllias DETC2009-87348 Rotor Dynamics
ASME Biennial 2009 Torsional Vibrations on a Hopper Dredger Due to Transient Conditions F. Petit and M. Loccufier DETC2009-87374 Rotor Dynamics
ASME Biennial 2009 Accounting for Roller Dynamics in the Design of Bifilar Torsional Vibration Absorbers Ryan J. Monroe, Steven W. Shaw, Alan H. Haddow, and Bruce K. Geist DETC2009-87431 Rotor Dynamics
ASME Biennial 2009 Thermoelastic Whirling Analysis of Cylinders During Grinding Erno Keskinen, Timo Karvinen, Teppo Syrjänen, Vladimir Dospel, Janne Koponen, and Mika Töhönen DETC2009-87469 Rotor Dynamics
ASME Biennial 2009 Analysis of Rotor Bearing Systems With Uncertainties: A Fuzzy Approach Singiresu S. Rao and Yazhao Qiu DETC2009-87471 Rotor Dynamics
ASME Biennial 2009 Fault Parameter Identification for Model Based Prognostics of a Ball Bearing With an Outer Race Defect Karthik Kappaganthu, C. Nataraj, and Biswanath Samanta DETC2009-87599 Rotor Dynamics
ASME Biennial 2009 Analysis and Troubleshooting of Steam Induced Instability for an Industrial Turbomachinery Song-yuan Lu, Zheng-feng Wu, and Xu Zhao DETC2009-87831 Rotor Dynamics
ASME Biennial 2009 Vibration Characteristics, Analysis and Diagnosis for Rub Between Rotor and Stator of Turbomachine in the Field Song-yuan Lu, Xu Zhao, and Zheng-feng Wu DETC2009-87832 Rotor Dynamics
ASME Biennial 2009 One-Shot Balancing of Rigid Rotors: A Closed-Form Solution Enrique S. Gutiérrez-Wing and Jorge E. Aguirre-Romano DETC2009-87836 Rotor Dynamics
ASME Biennial 2009 Free Vibration Analysis of Rotating Tapered Bresse-Rayleigh Beams Using the Differential Transformation Method S. Olutunde Oyadiji and Dominic R. Jackson DETC2009-87843 Rotor Dynamics
ASME Biennial 2009 A Modal Approach for Chaotic Vibrations of a Drillstring Kathira Mongkolcheep, Alan Palazzzolo, Annie Ruimi, and Randall Tucker DETC2009-87844 Rotor Dynamics
ASME Biennial 2009 Dynamics Stiffness Matrix Method for the Free Vibration Analysis of Rotating Uniform Shear Beams S. Olutunde Oyadiji and Dominic R. Jackson DETC2009-87852 Rotor Dynamics
ASME Biennial 2009 The Analyses of Dynamic Stability at Milling Machine Tools Petru A. Pop DETC2009-86070 Vibration, Stability, and Control
ASME Biennial 2009 Using a Vibration Absorber to Suppress Chatter Vibration in Turning Process With a Worn Tool Hamed Moradi, Firooz Bakhtiari-Nejad, and Mohammad R. Movahhedi DETC2009-86100 Vibration, Stability, and Control
ASME Biennial 2009 Nonlinear Vibrations and Stability of Shells Conveying Water Flow Marco Amabili, Kostas Karagiozis, and Michael P. Païdoussis DETC2009-86114 Vibration, Stability, and Control
ASME Biennial 2009 Uncertainties in Drill Dynamics: The Role of a Random Weight-On-Hook T. G. Ritto, C. Soize, and R. Sampaio DETC2009-86233 Vibration, Stability, and Control
ASME Biennial 2009 F.E.M. Design Method of Metallic and Composite Smart Structures With Piezoelectric Actuators Valérie Pommier-Budinger, Marc Budinger, Javier Romero Martinez, and Rafael Galan Galan DETC2009-86234 Vibration, Stability, and Control
ASME Biennial 2009 On Stability of Periodic Motion in a Switching System With Multiple Subsystems Albert C. J. Luo and Yang Wang DETC2009-86269 Vibration, Stability, and Control
ASME Biennial 2009 Quasi-Active Damping Jack N. Potter, Simon A. Neild, and David J. Wagg DETC2009-86582 Vibration, Stability, and Control
ASME Biennial 2009 Self-Excited Vibrations in a Delay Oscillator: Application to Milling With Simultaneously Engaged Helical Flutes Firas A. Khasawneh, Brian P. Mann, Oleg A. Bobrenkov, and Eric A. Butcher DETC2009-86636 Vibration, Stability, and Control
ASME Biennial 2009 Simultaneous Resonances of Geometric Nonlinear Nonuniform Beams Dumitru I. Caruntu DETC2009-86779 Vibration, Stability, and Control
ASME Biennial 2009 Numerical Studies on the Frequency Response of Vibration of Damped Axially Moving Wire Chunhui Chung and Imin Kao DETC2009-86880 Vibration, Stability, and Control
ASME Biennial 2009 Finite Difference Based Electrical Modeling and Vibration Control Simulation of Piezoelectric Structronic Plate System B. Y. Ren, H. S. Tzou, H. H. Yue, and L. Wang DETC2009-87175 Vibration, Stability, and Control
ASME Biennial 2009 Structured Eigensolution Properties of Planetary Gears With Elastically Deformable Ring Gears Robert G. Parker and Xionghua Wu DETC2009-87340 Vibration, Stability, and Control
ASME Biennial 2009 Vibration Analysis of Composite Beams With End Effects Via the Formal Asymptotic Method Jun-Sik Kim and K. W. Wang DETC2009-87414 Vibration, Stability, and Control
ASME Biennial 2009 Nonlinear Resonant Vibration of Counter-Shaft Gears With Fluctuating Mesh Stiffness Robert G. Parker DETC2009-87580 Vibration, Stability, and Control
ASME Biennial 2009 Switched Stiffness Vibration Controllers for Fluidic Flexible Matrix Composites Amir Lotfi-Gaskarimahalle and Christopher D. Rahn DETC2009-87591 Vibration, Stability, and Control
ASME Biennial 2009 An Investigation of the Damping Effects of Various Gas Environments on a Vibratory MEMS Device George Flowers, Robert Dean, Robert Jackson, and Jin Kim Seong DETC2009-87640 Vibration, Stability, and Control
ASME Biennial 2009 Parameter Sensitivity Analysis of Rotating Beams in Frequency Domain Masoud Ansari, Ebrahim Esmailzadeh, and Nader Jalili DETC2009-87686 Vibration, Stability, and Control
ASME Biennial 2009 Design of a New Type of Eddy Current Damper With Increased Damping Density Lei Zuo, Brian Scully, and Samir Nayfeh DETC2009-87714 Vibration, Stability, and Control
ASME Biennial 2009 Distributed Sensing Signals of Truncated Concial Shells With Clamped-Free Boundary Conditions H. Li, Z. B. Chen, and H. S. Tzou DETC2009-87765 Vibration, Stability, and Control
ASME Biennial 2009 Photonic Control of Plates Laminated With Multi-DOF Photostrictive Actuators Xin-Jie Wang, Hong-Hao Yue, Jing Jiang, Zong-Quan Deng, and Horn-Sen Tzou DETC2009-87792 Vibration, Stability, and Control
ASME Biennial 2009 Stable Inversion Using the Assumed-Modes Rayleigh-Ritz Approximation for Tip Tracking of an Elastic Beam Priyanka Mandali and Qiao Sun DETC2009-87794 Vibration, Stability, and Control

Copyright © 2017 Rotating Machinery Analysis, Inc.. All rights reserved.