ISCORMA 2001 Design Optimization of High Speed Laboratory Centrifuges Using an Evolutionary Strategy J. Strackeljan, X. Feng, D. Behr 1003
ISCORMA 2001 Detection of a Rotor Crack by a Periodic Excitation Y. Ishida, T. Inoue, K. Nishimura 1004
ISCORMA 2001 Detection of Feedback Related Faults in Magnetic Bearing/Rotor Systems Using Synchronous Control Techniques M. N. Sahinkaya, M. O. T. Cole, P. S. Keogh, C. R. Burrows 1005
ISCORMA 2001 Sensitive and Noise-Immune Vibration Discriminants for Instability Phenomena Detection Caused by Incipient Machinery Deterioration A. Sokolova, F. Balitsky 1006
ISCORMA 2001 A Hybrid Radial Bearing With Improved Rotordynamic Stability L. San Andrés 2006
ISCORMA 2001 Dynamic Response of a Rotor Supported on a Floating Ring Bearing J. Naranjo, C. Holt, L. San Andrés 2005
ISCORMA 2001 Dynamic Analysis of High Speed Spindle System With Diametrical and Thrust Magnetic Bearings T. N. Shiau, C. M. Chang, K. S. Hsu 2003
ISCORMA 2001 Some Types, Classification and Definitions of Instability in Rotating Machinery V. Oravský 2009
ISCORMA 2001 The Effect of Bearing Clearances on Its Dynamic Stiffness Z. Racic 3009
ISCORMA 2001 Design Optimization of Fixed Pad Journal Bearing for Rotor System Using a Genetic Algorithm Approach H. Saruhan, K. E. Rouch, C. A. Roso 3001
ISCORMA 2001 Investigation of New Design of 3-Lobe Journal Bearing R. Karpiuk, W. Radulski, O. Olszewski, P. Ostrowski, A. Malec 3013
ISCORMA 2001 Active Controlled Fluid Film Based on Wave Bearing Technology F. Dimofte, R. C. Hendricks 3014
ISCORMA 2001 Analysis of the Dynamic Characteristics of Lab-Centrifuges and Its Application Y. Yang, Z. Wang 4003
ISCORMA 2001 Effect of Lubrication System on Dynamic Analysis of Scroll Compressors W.-S. Lee, J.-J. Chieh, W.-L. Chen, S.-L. Chen 4010
ISCORMA 2001 A Composite Air Spindle-Rotor System D. G. Lee, S. H. Chang 4013
ISCORMA 2001 Rotordynamics and DDM Design Sensitivity Analysis of an APU Gas Turbine Having a Spline Shaft Connection A. S. Lee, J. W. Ha 4001
ISCORMA 2001 Fact and Fallacy in Linear Rotordynamics Analysis A. Caldwell 5001
ISCORMA 2001 Life Begins at 70 K. Liu 5009
ISCORMA 2001 On Transient Excitation of a Damped Two-Bladed Rotor J. F. Bratt 5007
ISCORMA 2001 Vibration Characteristics of Rotors With Massive Overhangs B. Ryjik 5006
ISCORMA 2001 Online Lubrication Performance Monitoring of Fluid Film Bearing by Shaft Vibration Measurement T. Toyota, T. Niho, T. Chiba 3011
ISCORMA 2001 Numerical Analysis of the Journal Motion in the Hydrodynamic Bearing of the Internal Combustion Engine V. M. Fridman, C. F. Musolff, I. L. Piraner 3012
ISCORMA 2001 Computational Modelling of Dynamic Behaviour and Stability of Journal Bearings Using the Bézier Body E. Malenovský, F. Pochylý 3002
ISCORMA 2001 Externally Pressurized Bearings Allow Rotor Dynamic Optimization D. E. Bently, T. Eldridge, J. Jensen 3018
ISCORMA 2001 Why We Need to Install Exciters in Rotating Machines? -- Benefits and Prospects C.-W. Lee 1007
ISCORMA 2001 Diagnostic Approaches for Gears and Bearings C. Breneur, J. Mahfoudh, K. Stofleth, D. Play 1008
ISCORMA 2001 Vibroacoustical Diagnostics of the Movable Reflector-Modulator of the IBR-2 Pulsed Research Reactor S. V. Evropin, V. D. Sizarev, L. V. Yakushina, V. D. Ananiev, L. V. Edunov 1009
ISCORMA 2001 Expert System Source Identification of Excessive Vibration R. G. Kirk, Z. Guo 1010
ISCORMA 2001 Cracked Beam Section Model Applied to Turbine Rotors C. Vare, S. Andrieux 4002
ISCORMA 2001 Dynamic Analysis of Rotor Systems With Angular Contact Ball Bearings Subject to Axial and Radial Loads S.-W. Hong, Y. C. Shin 4009
ISCORMA 2001 Dynamics of Rotating Flexible Blade-Disc-Shaft Assemblies -- Application to a Turbomolecular Pump Rotor G. Jacquet-Richardet, E. Chatelet, C. Gaboyer, O. Dauvillier 4014
ISCORMA 2001 Dynamic Behavior of High-Speed Rotor Supported by Fluid Film Journal Bearings Y. M. Temis, M. Y. Temis 4012
ISCORMA 2001 Analysis of Externally Pressurized Fluid-Film Bearings for High-Speed Rotating Machinery Z. Guo, R. G. Kirk 3006
ISCORMA 2001 Experimental Study of the Rotor Rig With a Bubble Inserted Into the Bearing Clearance D. E. Bently, A. Petchenev, O. Malakhova 3015
ISCORMA 2001 Stability Insights From Hybrid-Bearing Research at the Texas A&M University Turbomachinery Laboratory D. W. Childs 3016
ISCORMA 2001 Hydrostatic Pivoted Pad Bearing for Oil-Free Turbomachinery L. M. Greenhill, V. J. Lease 3005
ISCORMA 2001 Numerically Calculated Rotor Dynamic Coefficients of a Pump Rotor Side Space T. Staubli, M. Bissig 4007
ISCORMA 2001 An Analysis of Rotor System Dynamics Using Properties of Separate Rotors, Obtained by FEM Softwares B. Ryjik 4011
ISCORMA 2001 Identification of External Disturbances in Rotating Machinery With Magnetic Bearings Z. Gosiewski 4004
ISCORMA 2001 Decoupling Control of Fault-Tolerant Magnetic Bearings U. J. Na, A. B. Palazzolo, A. F. Kascak 4008
ISCORMA 2001 Determination of Contact Forces During Rubbing Considering Blade Dynamics J. Ahrens, H. Ulbrich 5004
ISCORMA 2001 Thermo-Mechanical Behavior of Rotor With Rubbing J. T. Sawicki, A. Montilla-Bravo, Z. Gosiewski 5008
ISCORMA 2001 Consideration of Whirl Frequency Ratio and Effective Damping Coefficient of Seal T. Iwatsubo, H. Ishimaru 2014
ISCORMA 2001 The Effect of Swirl Braked Grooved Seals on the Stability and the Unbalance Response of a Flexible Rotor H. Ishimaru, T. Iwatsubo 2004
ISCORMA 2001 Effects of Seal Geometry on Rotordynamic Fluid Forces G. Morimoto, H. Nishida, Y. Yoshida, Y. Tsujimoto, S. Morii, Y. Kawashima 2012
ISCORMA 2001 Design Verification and Troubleshooting by Vibration Exciting Test in Actual Operating Condition H. Kanki 2013
ISCORMA 2001 Condition Monitoring and Diagnosis of Rotating Machinery by Gram-Charlier Expansion of Vibration Signal T. Toyota, T. Niho, P. Chen 1013
ISCORMA 2001 Vibration and Stability of 3000 HP Titanium Construction Chemical Process Blower L. Gutzwiller, M. A. Corbo 1014
ISCORMA 2001 Application of In-Operation Modal Analysis in Diagnostics of Machinery T. Uhl, T. Barszcz, W. Lisowski 1016
ISCORMA 2001 Rotordynamic Influence on Rolling Element Bearing Selection and Operation G. K. Queitzsch, Jr., D. P. Fleming 1017
ISCORMA 2001 Air-Hammer Instability of Externally Pressurized Compressible-Fluid Bearings J. S. Jacob, J. J. Yu, D. E. Bently, P. Goldman 2015
ISCORMA 2001 Effect of Interference Fits on Threshold Speeds of Rotordynamic Instability J. M. Vance, D. Ying 2007
ISCORMA 2001 Surge Characteristics of Centrifugal Compressors With IGV's C. Rodgers 2002
ISCORMA 2001 Stability Analysis of Isotropic Rotor-Bearing Systems With Internal Damping Using Finite Elements L. Forrai 2010
ISCORMA 2001 An Effect of Pad Support Position on the Dynamic Characteristics of Tilting 4-Pad Journal Bearing S. Strzelecki 3008
ISCORMA 2001 Analysis of Short Magnetohydrodynamic Journal Bearings J. Wauer, B. Schweizer 3004
ISCORMA 2001 Development of a Test Rig for the Measurement of Squeeze-Film Damper Force Coefficients J. I. Inayat-Hussain, H. Kanki, Y. Senno 3010
ISCORMA 2001 Short Journal Bearings With Misaligned Axes J. Gomez-Mancilla, V. R. Nosov 3017
ISCORMA 2001 Experimental Study of an Overhung Rotor System With Gyroscopic Effects, and the System's Response to Partial Rub K. Dayton, P. Goldman, W. Franklin, D. E. Bently 5011
ISCORMA 2001 Presentation: Determining Dynamic Stiffness of a Pressurized Bearing Using 3D CFD Code With Experimental Verification Robert Blumenthal and Wes Franklin 0
ISCORMA 2003 Numerical Modelling and Simulation in Rotordynamics G. Genta
ISCORMA 2003 Reviewing Turbomachine Sealing and Secondary Flows R. C. Hendricks, B. M. Steinetz, M. J. Braun, L. T. Tam, A. Muszynska, E. V. Zaretsky, M. M. Athavale, A. J. Przekwas
ISCORMA 2003 Unconventional Bearings in Turbomachinery - Modeling and Selected Applications Z. Kozanecki
ISCORMA 2003 The Influence of Damping on the Efficiency of Autobalancing Devices for Rigid Rotors B. Ryzhik, L. Sperling, and H. Duckstein
ISCORMA 2003 The Application of High Speed and Optimal Control in Electromagnetic Bearing System Based on DSP, S. Liu, Z. Bian, and C. Yin
ISCORMA 2003 Influence of Control Loop on Torsional Vibrations of Rotating Machinery Z. Domachowski, W. Próchnicki, Z. Puhaczewski, and M. Dzida
ISCORMA 2003 Dynamic Characteristics of Tilting 12-Pad Journal Bearing O. Olszewski, S. Strzelecki, and T. Someya
ISCORMA 2003 Effect of Bore Profile on the Static and Dynamic Characteristics of 6-Lobe Journal Bearing S. Strzelecki
ISCORMA 2003 Influence of Elastohydrodynamic Contact Deformations in Fluid Film Bearing on High-Speed Rotor Dynamic Y. M. Temis and M.Y. Temis
ISCORMA 2003 Sub-Synchronous Whirl in the LE-7A Rocket Engine Fuel Turbo-Pump Motoi, A. Kitamura, N. Sakazume, M. Uchiumi, M. Uchida, K. Saiki, O. Nozaki, T. Iwatsubo
ISCORMA 2003 Detection Technique for Faults Perturbing Rotor Stability, Illustrated by Means of an Example of the Movable Reflector-Modulator of the Pulsed Research Reactor A. G. Sokolova, F. J. Balitsky, and V. D. Sizarev
ISCORMA 2003 Dynamic Analysis of a Dual Rotor-Bearing System in Support of the TF-41 Seeded-Fault Testing J. T. Sawicki, J. P. Gyekenyesi, G. Y. Baaklini, and A. L. Gyekenyesi
ISCORMA 2003 Rotational Test of a Flexible Rotor Supported by Active Magnetic Bearings H. Fujiwara, M. Ito, O. Matsushita, and Y. Kanemitsu
ISCORMA 2003 New Concept of the Spin Test System With Active Magnetic Bearings D. Kozanecka, Z. Kozanecki, T. Lech, and P. Swider
ISCORMA 2003 Steady-State Analysis of the Long Plain Journal Bearing in the Nanotechnology Environment C. H. T. Pan, D. Kim, and M. D. Bryant
ISCORMA 2003 Dynamic Analysis of the Long Plain Journal Bearing in the Nanotechnology Environment, C. H. T. Pan, D. Kim, and M. D. Bryant
ISCORMA 2003 Dynamic Behavior of Cracked Flexible Rotor Subjected to Constant Driving Torque J. T. Sawicki, D. E. Bently, X. Wu, G. Y. Baaklini, and M. I. Friswell
ISCORMA 2003 Detection of Steady Crack Growth on Rotating Shafts J. Gómez-Mancilla, V. R. Nosov, and R. García-Illescas
ISCORMA 2003 Control of Overhung Rotor Supported by Active Magnetic Bearings M. Ito, H. Fujiwara, O. Matsushita, and N. Takahashi
ISCORMA 2003 The Spindle Speed Optimal Control in Modern Milling Operations K. J. Kalinski and M. Galewski
ISCORMA 2003 On Vibration Control of Transiently Excited Structurally Damped 3-Bladed Rotor J. F. Bratt
ISCORMA 2003 Destabilizing Force of Labyrinth Seal Under Partial Admission Condition H. Kanki, S. Shibabe, and N. Goshima
ISCORMA 2003 Influence of Structural Parameters and Flow Conditions on the Dynamic Behaviour of Flexible Labyrinth Seals G. Schuck and R. Nordmann
ISCORMA 2003 Introduction to Computational Modelling of Taylor Vortices for Fluid-Film Interaction Structures E. Malenovský and F. Pochylý
ISCORMA 2003 Coupled Forms of Vibrations in Rotating Machinery J. Kicinski
ISCORMA 2003 Coupled Vibration Analysis of an Industrial Gas Turbine Engine & Drivetrain - Analysis and Testing A. Surial and A. Kaushal
ISCORMA 2003 New Theory of Rotor Dynamics: Dynamics of Umbrella-Type Rotor With Flexible Support A. Y. Zhivotov, Y. G. Zhivotov, and Y. V. Brazaluk
ISCORMA 2003 Experimental Verification of Piecewise Nonlinear Jeffcott Rotor Model With Preloaded Snubber Ring E. V. Karpenko, M. Wiercigroch, and R. D. Neilson
ISCORMA 2003 Dynamic of the Non-Holonomic Rotating Machinery With Variable Speed Drives M. Zlokolica, W. Wisutmethangoon, P. Ngamsritragul, B. Sovilj, and M. Vladimir
ISCORMA 2003 Stability of a Rotor Supported by Wave Journal Bearings as a Function of Oil Temperature M. I. Lambrulescu, F. Dimofte, and J. T. Sawicki
ISCORMA 2003 Thermal Effects on Dynamic Characteristics of Tilting 5-Pad Journal Bearing S. Strzelecki and Z. Towarek
ISCORMA 2003 Natural Frequencies and Mode Shapes of Rotating Three Shrouded Bladed Discs Placed on the Part of the Shaft R. Rzadkowski, L. Kwapisz, J. Sokolowski, R. Karpiuk, P. Ostrowski, and W. Radulski
ISCORMA 2003 On the Role of Damping on the Dynamics of Rotating Blades G. Genta
ISCORMA 2003 Improvement of Rotor Performance Under Rubbing Conditions Through Active Auxiliary Bearings J. Jiang and H. Ulbrich
ISCORMA 2003 Impacting of a Rotor Against Retainer Bearing A. Muszynska
ISCORMA 2003 Impact Velocity Modeling of Gear Vibration to Estimate Defect Width A. Parey and N. Tandon
ISCORMA 2003 Modeling the Oil Flow Beneath the Flexible Sleeve of an Active Oil Bearing X. Yu, G. Davies, and J. Krodkiewski
ISCORMA 2003 Influence of Oil Flow Under the Flexible Sleeve of the Active Bearing on the Stability of the Rotor Bearing System X. Yu, G. Davies, and J. Krodkiewski
ISCORMA 2003 Synchronous Analysis for Diagnostics of Rolling Bearings in the Turbo Jet Engine Z. Gosiewski and A. Romaniuk
ISCORMA 2003 Diagnosing of Unbalancing Gas Turbine Rotors A. Charchalis and A. Grzadziela
ISCORMA 2003 Robust Active Vibration Control of Flexible Rotors Using Piezo Actuators as Active Bearing A. Alizadeh, C. Ehmann, U. Schönhoff, and R. Nordmann
ISCORMA 2003 Stability Control of an AMB-Driveline System With Internal Damping and Non-Constant Velocity Couplings H. A. DeSmidt, K. W. Wang, E. C. Smith, andA. J. Provenza
ISCORMA 2003 Dynamic Characteristics of Rotor-Bearing System With the Rotor Reinforced by Light Coating of Composite Material S. M. Ghoneam and S. Strzelecki
ISCORMA 2003 On the Use of the "Bagplot" Representation for a Sensitivity Analysis on the Effects of Bearing Dynamic Stiffness Variations on the Vibrations of a Steam Turbine P. Pennacchi and A. Vania
ISCORMA 2003 ADRE® Application in Measuring Hot-Cold-Hot Machinery Component Movement I. Dabelic
ISCORMA 2003 Analytical-Numerical Approach for Non-Linear Dynamic Modeling of the Bearing-Rotor-Shaft Systems to Design and Fault Diagnostics T. Szolc, J. Kicinski, and R. Rzadkowski
ISCORMA 2003 Feedforward and Feedback Control During N-Waved Machining by Magnetic Bearing Spindles Z. Gosiewski and J. T. Sawicki
ISCORMA 2003 FPGA Based Transconductance Amplifier for AMB Application M. Chiaberge, C. Damilano, F. Maddaleno, and G. Genta
ISCORMA 2003 Actuator/Sensor Integration in Magnetic Bearings Z. Gosiewski and M. Szaro
ISCORMA 2003 Non-Axisymmetrical 3D Element for FEM Rotordynamics M. Silvagni, G. Genta, and A. Tonoli
ISCORMA 2003 Vibration Measurements and FE Modeling Tools in Root Cause Analysis (I) Z. Racic
ISCORMA 2003 Runout Measurements With Non-Contact Probes, and FE Modeling, Tools in RootCause Analysis (II) Z. Racic
ISCORMA 2003 Vibration Problems of High Power Air Blower Machine V. Barzdaitis, M. Bogdevicius, and S. Gecys
ISCORMA 2003 Full Load String Test Experience on the Instability of a High Speed Back to Back Compressor Equipped With a Honeycomb Seal M. Camatti, G. Vannini, L. Baldassarre, J. Fulton, and P. Forte
ISCORMA 2003 Instability Induced by Iron Losses in Rotor-Active Magnetic Bearing System N. Takahashi, M. Hiroshima, H. Miura, and Y. Fukushima
ISCORMA 2003 Stability of Gas-Lubricated Externally Pressurized Two-Layered Porous Journal Bearings, N. Saha and B. C. Majumdar
ISCORMA 2003 Stability Performance Comparison of Rotor-Bearing Systems Supported on Conventional and Hybrid Journal Bearings J. Gómez-Mancilla, V. Nosov, A. Ordoñez-Pantoja, and G. Silva-Navarro
ISCORMA 2003 Dynamics of a Rigid Rotor in Non-Linear Squeeze-Film Dampers J. I. Inayat-Hussain
ISCORMA 2003 Identification of Dynamic Stiffness of Squeeze Film Damper Using Active Magnetic Bearing System as an Exciter K.-J. Kim and C.-W. Lee
ISCORMA 2003 Field Experience With Vibration of Well Balanced Rotors Due to Shaft-Bearing Misalignment and Other Factors R. S. Norek
ISCORMA 2003 Dynamic Response of Rotor Bearing System Under the Effect of Residual Shaft Bow Mounted on Viscoelastic Suspensions T. N. Shiau and E. K. Lee
ISCORMA 2003 Unbalance Response Prediction for Rotors on Ball Bearings Using Speed and Load Dependent Nonlinear Bearing Stiffness D. P. Fleming and J. V. Poplawski
ISCORMA 2003 Vibration Control of Nonlinear Rotor Systems Using Dynamic Damper Y. Ishida and T. Inoue
ISCORMA 2003 Experimental Determination of Rotor Bearing Parameters and Fluid Inertia Effect Using Nonsynchronous Perturbation Testing D. E. Bently, D. W. Mathis, G. R. Thomas, and G. G. Nichols
ISCORMA 2003 Simulating and Testing the Transient Response of Rotors Equipped With Externally Pressurized Bearings Using State Space Modeling D. E. Bently, D. W. Mathis, and J. M. Meagher
ISCORMA 2003 Normalization of Vibration Measurements: Unnecessary Complication or ImportantPrerequisite? T. Galka
ISCORMA 2003 Industrial SCADA Software Enriched With MATLAB/Simulink Functionality Applied to the AMB System A. Pilat and K. Kolek
ISCORMA 2003 Nonlinear Regular and Chaotic Bending Vibrations of a Rotating Shaft Z. Dzygadlo and I. Nowotarski
ISCORMA 2005 STABILITY AND STRENGTH OF MODES IN ROTATING MACHINERY Lee, C.-W. 2
ISCORMA 2005 COMPREHENSIVE ANALYSIS OF A ROTORDYNAMIC PROBLEM Racic, Z. 100 Monitoring and diagnostics (practice, field case histories)
ISCORMA 2005 ABSOLUTE AND RELATIVE VIBRATIONS INCONSISTENCIES IN MONITORING AND DIAGNOSTIC OF HIGH POWER TURBOGENERATOR Barzdaitis, V., Jonušas, R., Bogdevicius, M., Didžiokas, R. 101 Monitoring and diagnostics (practice, field case histories)
ISCORMA 2005 USING STATISTICAL MODELS IN HYDRO GENERATING UNITS CONDITION MONITORING AND DIAGNOSTICS Brito, G. C., Jr. 102 Monitoring and diagnostics (practice, field case histories)
ISCORMA 2005 MONITORING AND DIAGNOSIS OF THE HYDRAULIC TURBINES BY BENTLY NEVADA SYSTEM Nicolae, V., Constantin, C., Dorobantu, C., Antonescu, I. 104 Monitoring and diagnostics (practice, field case histories)
ISCORMA 2005 SUCCESSFUL TROUBLE-SHOOTING OF MIGRATING SECOND CRITICAL SPEED ON A 240MW STEAM TURBINE Adams, Maurice, Adams, Michael, Anderson, N., Rossero, D., Giberson, M. 105 Monitoring and diagnostics (practice, field case histories)
ISCORMA 2005 ROTORDYNAMICS SIGNATURE FOR EMBEDDED SYSTEM Carabelli, S., Macchi, P., Silvagni, M., Tonoli, A., Visconti, M. 106 Monitoring and diagnostics (practice, field case histories)
ISCORMA 2005 APPLICATION OF ROTOR DYNAMIC ANALYSIS FOR EVALUATION OF SYNCHRONOUS SPEED INSTABILITY AND AMPLITUDE HYSTERESIS AT 2ND MODE FOR A GENERATOR ROTOR IN A HIGH-SPEED BALANCING FACILITY L’vov, M. M., Gunter, E. J. 107 Monitoring and diagnostics (practice, field case histories)
ISCORMA 2005 HEALTH MONITORING OF ROTATING MACHINERY THROUGH EXTERNAL FORCING Mani, G., Quinn, D., Kasarda, M., Kirk, G., Inman, D. 108 Monitoring and diagnostics (practice, field case histories)
ISCORMA 2005 COMMISSIONING OF PRESSURIZED GAS BEARINGS IN A 180 HP METHANE TURBOEXPANDER IN AN LNG PRODUCTION FACILITY Bently, D. E., Thomas, G. R. 109 Monitoring and diagnostics (practice, field case histories)
ISCORMA 2005 EFFECTIVELY AVOIDING DOWNTIME THROUGH PERMANENT VIBRATION MONITORING - SOME CASE STUDIES De Bauw, K., Grégoire, S. 110 Monitoring and diagnostics (practice, field case histories)
ISCORMA 2005 ESTIMATING BEARING STATIC LOAD DISTRIBUTION IN MULTI-BEARING Lees, A. W., Friswell, M. I., Sinha, J. K., Ashmore, I. 201 Stability of rotating equipment
ISCORMA 2005 DYNAMIC ANALYSIS OF A TURBOCHARGER IN FLOATING BUSHING BEARINGS Gunter, E. J., Chen, W. J. 203 Stability of rotating equipment
ISCORMA 2005 STABILITY OF HIGH PRESSURE TURBINE UNDER PARTIAL ADMISSION CONDITION Kanki, H., Tanitsuji, A. 204 Stability of rotating equipment
ISCORMA 2005 CONTROLLED UMP IN ELECTRICAL MACHINES CAN STABILIZE OTHERWISE UNSTABLE MACHINES Garvey, S. D., Khoo, S. W. K., Kalita, K. 205 Stability of rotating equipment
ISCORMA 2005 BLADE VIBRATIONS IN A RADIAL INFLOW TURBINE WITH VARIOUS NUMBERS OF NOZZLE GUIDE VANES Klaus, M., Schulz, A., Bauer, H.-J. 206 Stability of rotating equipment
ISCORMA 2005 INFLUENCE OF CASING TREATMENT GROOVES ON COMPRESSOR STABLE OPERATION RANGE Nezym, V. Yu. 207 Stability of rotating equipment
ISCORMA 2005 THE DIAGNOSING AND CORRECTIVE ACTIONS TAKEN TO REDUCE THE EFFECTS OF STEAM WHIRL IN A GE D-11 STEAM TURBINE Mondy, R. E. 208 Stability of rotating equipment
ISCORMA 2005 ON INCREASING THE STABILITY THRESHOLD OF A ROTOR BY OPEN-LOOP CONTROL OF THE BEARING MOUNT STIFFNESS Ecker, H., Tondl, A. 209 Stability of rotating equipment
ISCORMA 2005 STABILIZATION OF LABYRINTH SEAL FORCE BY INJECTING THE LEAKAGE FLOW TO PRESWIRL GROOVE Nakamura, R., Iwatsubo, T. 211 Stability of rotating equipment
ISCORMA 2005 NONLINEAR WHIRL RESPONSE OF A HIGH-SPEED SEAL TEST ROTOR WITH MARGINAL AND EXTENDED SQUEEZE-FILM DAMPERS Proctor, M. P., Gunter, E. J. 212 Stability of rotating equipment
ISCORMA 2005 ROTOR UNBALANCE-RELATED LATERAL/TORSIONAL VIBRATION COUPLING LEADING TO SELF-EXCITED VIBRATIONS Muszynska, A., Yuan, J. 213 Stability of rotating equipment
ISCORMA 2005 EFFECT OF DAMPING AND FRICTION ON THE ROTOR/SEAL FULL ANNULAR RUB Muszynska, A., Yu, J. J. 214 Stability of rotating equipment
ISCORMA 2005 STATIC AND DYNAMIC DATA LABYRINTH SEAL FOR OPTIMUM DESIGN Iwatsubo, T., Mochida, H., Matsuda, M. 215 Stability of rotating equipment
ISCORMA 2005 PERFORMANCE ANALYSIS OF SEALING DEVICE IN GAS TURBINE ENGINE Kadaner, J. S., Temis, J. M., Selivanov, A. V. 216 Stability of rotating equipment
ISCORMA 2005 MORTON EFFECT ANALYSIS - THEORY, PROGRAM AND CASE STUDY Kirk, R. G., Guo, Z. 217 Stability of rotating equipment
ISCORMA 2005 INSTABILITY OF A ROTATING PRE-TWISTED BLADE WITH A CRACK Huang, B.-W. 218 Stability of rotating equipment
ISCORMA 2005 WHIRLING MOTION OF THE IMPELLER OF A CENTRIFUGAL PUMP AS A VENTRICULAR ASSIST DEVICE Tsukiya, T., Taenaka, Y., Tsujimoto, Y., Horiguchi, H. 219 Stability of rotating equipment
ISCORMA 2005 EFFECT OF DESIGN PARAMETERS ON THE DYNAMIC CHARACTERISTICS OF TILTING-PAD JOURNAL BEARINGS Strzelecki, S., Kapusta, H. 220 Stability of rotating equipment
ISCORMA 2005 EFFECT OF BEARING CLEARANCE ON THE STABILITY OF CYLINDRICAL JOURNAL BEARING Strzelecki, S., Zielinski, T. 221 Stability of rotating equipment
ISCORMA 2005 CFD EVALUATION OF TURBOMACHINERY SECONDARY FLOW LEAK PATH AND LABYRINTH SEAL ENTRY SWIRL Guo, Z., Kirk, R. G. 222 Stability of rotating equipment
ISCORMA 2005 CONTROL OF IMPACT PHENOMENA OF A RUBBING ROTOR Ulbrich, H., Chavez, A., Ginzinger, L. 223 Stability of rotating equipment
ISCORMA 2005 EVALUATION OF STABILITY MARGIN OF ACTIVE MAGNETIC BEARING CONTROL SYSTEM USING SENSITIVITY FUNCTION Fujiwara, H. 224 Stability of rotating equipment
ISCORMA 2005 STABILITY ANALYSIS OF VERTICAL ROTOR WITH EXTERNAL STIFFNESS AND DAMPING SUPPORTED ON JOURNAL BEARINGS Sawicki, J. T., Rao, T. V. V. L. N. 229 Stability of rotating equipment
ISCORMA 2005 VIBRATIONS OF A ROTOR SUPPORTED ON AERODYNAMIC BEARINGS AS AN EVOLUTIVE SYSTEM Pust, L., Kozanek, J. 300 Bearing/seal technology
ISCORMA 2005 FLUID FILM BEARING FOR HEAVY LOADED APPLICATIONS – COMPARISONS AND OPTIMIZATIONS Dimofte, F., Sawicki, J. T., Lambrulescu, M. I., Handschuh, R. F., Long-Davis, M. J. 302 Bearing/seal technology
ISCORMA 2005 TEST RESULTS OF PAD TRACKING FOR A SPHERICAL PIVOT TILTING PAD BEARING Sabnavis, G., Kirk, R. G. 303 Bearing/seal technology
ISCORMA 2005 DYNAMIC CHARACTERISTICS OF TILTING 5-PAD JOURNAL BEARING AT TURBULENT OIL FILM Strzelecki, S. 305 Bearing/seal technology
ISCORMA 2005 DYNAMIC CHARACTERISTICS OF THE CYLINDRICAL JOURNAL BEARINGS OF VARIABLE AXIAL PROFILE Strzelecki, S., Ghoneam, S. M. 306 Bearing/seal technology
ISCORMA 2005 PIEZO ACTUATORS FOR VIBRATION REDUCTION OF AERO ENGINE ROTORS - CASE STUDY Ehmann, C., Liebich, R. 307 Bearing/seal technology
ISCORMA 2005 AN ANALYSIS OF THE DYNAMIC REGIME OF HYDRODYNAMIC WAVE JOURNAL BEARINGS Ene, N. M., Dimofte, F., Keith, T. G., Jr. 308 Bearing/seal technology
ISCORMA 2005 ANGULAR SELF-SENSING ALGORITHM OF LORENTZ FORCE TYPE INTEGRATED MOTOR-BEARING SYSTEM Jeon, H.-W., Park, S.-H., Park, Y., Lee, C.-W. 309 Bearing/seal technology
ISCORMA 2005 DIAGNOSIS OF CRACKED SHAFTS USING ANGULAR MOMENTUM CHANGES CALCULATED FROM DIRECTIONALLY FILTERED ORBIT DATA Meagher, J., Chun, H.-W. W. 400 Rotating machinery modeling
ISCORMA 2005 APPLICATION OF STATISTICAL METHODS FOR THE EVALUATION OF THE CONDITION OF MARINE GAS TURBINE ENGINES AND PREDICTING THE TIME OF THEIR FAULTLESS OPERATION Adamkiewicz, A. 402 Rotating machinery modeling
ISCORMA 2005 NON-LINEAR VIBRATIONS IN CRACKED ROTORS Sinou, J.-J., Lees, A. W. 403 Rotating machinery modeling
ISCORMA 2005 DYNAMIC ANALYSIS OF HIGH-SPEED CENTRIFUGAL PUMP BEARING SUPPORT STRUCTURE Ramakrishna, K., Narsireddy, K., Saibabu, K. S. 404 Rotating machinery modeling
ISCORMA 2005 DYNAMIC MODELLING OF SPUR GEAR PAIR INCLUDING A CRACK Parey, A., Tandon, N. 405 Rotating machinery modeling
ISCORMA 2005 PROBABILISTIC APPROACH FOR ROBUST DESIGN OF GAS-LUBRICATED TILTING-PAD BEARING Wu, E.-R. 408 Rotating machinery modeling
ISCORMA 2005 IDENTIFICATION OF ANISOTROPY AND ASYMMETRY IN ROTOR SYSTEMS FROM DIRECTIONAL FREQUENCY RESPONSE ESTIMATES Seo, Y.-H., Kang, S.-W., Lee, C.-W. 409 Rotating machinery modeling
ISCORMA 2005 RESONANT DYNAMICS IN A ROTORDYNAMIC SYSTEM WITH NONLINEAR INERTIAL COUPLING Quinn, D. 411 Rotating machinery modeling
ISCORMA 2005 FREE BODY DYNAMICS OF A SPINNING CYLINDER WITH PLANAR RESTRAINT [AKA: FUN WITH A BARREL] Moraru, L., Dimofte, F., Hendricks, R. C. 412 Rotating machinery modeling
ISCORMA 2005 CHAOTIC BEHAVIOR OF ROTORS ON LUBRICATED BEARINGS Genta, G., Amati, N., Repaci, A. 417 Rotating machinery modeling
ISCORMA 2005 EXPERIMENTS AND ANALYSIS FOR A COMMON CASE OF CRACKED ROTORS INSTABILITY AIDING ITS DETECTION Gómez-Mancilla, J., Machorro-López, J. 418 Rotating machinery modeling
ISCORMA 2005 UNBALANCE RESPONSE PREDICTION FOR ACCELERATING ROTORS WITH LOAD-DEPENDENT NONLINEAR BEARING STIFFNESS Fleming, D. P., Sawicki, J. T., Poplawski, J. V. 420 Rotating machinery modeling
ISCORMA 2005 LASER CLADDING, DRILLING AND SHAPING AS PRODUCTION, REPAIR AND OVERHAUL TECHNOLOGIES FOR ROTATING MACHINERY Kreutz, E. W., Willach, J., Trippe, L., Kelbassa, I. 501 General rotor dynamics
ISCORMA 2005 DYNAMIC CHARACTERISTICS OF NON-CIRCULAR TAPERED ANNULAR SEALS CONSIDERING FLUID INERTIA EFFECTS IN TURBULENT FLOW Ghosh, M. K., Gautam, S. S. 502 General rotor dynamics
ISCORMA 2005 FEA STUDY IN WOBBLING EFFECT ON A LARGE DIAMETER TURBINE- ENERGETECH 1st GENERATION WAVE ENERGY TURBINE HUB Obeyesekera, R. 503 General rotor dynamics
ISCORMA 2005 THE BEAUTY OF ROTORDYNAMICS Genta, G. 504 General rotor dynamics
ISCORMA 2005 CONTRIBUTION OF BEARING STRUCTURE IN GAS TURBINE POWER UNIT ROTOR DYNAMICS Temis, J. M., Temis, M. J. 506 General rotor dynamics
ISCORMA 2005 UNBALANCE RESPONSE CONTROL IN HIGH-SPEED GAS TURBINE SYSTEM USING MAGNETO-RHEOLOGICAL FLUID BASED SEMI-ACTIVE SQUEEZE FILM DAMPER Kim, K.-J., Lee, C.-W. 507 General rotor dynamics
ISCORMA 2005 VIBRATION SUPPRESSION OF A ROTOR SYSTEM BY A MAGNETIC DAMPER Ishida, Y., Inoue, T. 508 General rotor dynamics
ISCORMA 2005 SOME CONSIDERATIONS ON CYCLIC SYMMETRY IN ROTORDYNAMICS Genta, G., Silvagni, M. 509 General rotor dynamics
ISCORMA 2005 DYNAMIC CHARACTERISTIC STUDY OF A NONLINEAR ROTOR THRUST BEARING SYSTEM Shiau, T. N., Hsu, W. C. 510 General rotor dynamics
ISCORMA 2007 EXPERIENCES WITH FLUTTER VIBRATIONS OF LOW-PRESSURE STEAM TURBINE BLADES Rieger, N. 100
ISCORMA 2007 DYNAMIC BEHAVIOR OF LARGE ROTATING ELECTRIC MACHINES (Analysis with Simplified Analytical Mathematical Models) Brito, G. C., Brol, Keila B., Brol, Kellen B. 104
ISCORMA 2007 DEVELOPMENT OF MECHANICAL EXCITER FOR DYNAMIC TESTING OF HEAVY STRUCTURES AND FOUNDATIONS Ramakrishna, K, Rao, S., Ghosh, M., Saibabu, K. 105
ISCORMA 2007 LOW-PRESSURE TURBINE ROTOR CRACK INFLUENCE ON DYNAMIC STATE OF LARGE POWER TURBO-SET - NUMERICAL ANALYSIS Banaszek, S., 107
ISCORMA 2007 APPLICATION OF ACOUSTIC IMPULSE RESPONSE IN DIAGNOSTIC TESTS OF ROTOR BLADE IN STATIONARY CONDITIONS Kotowski, A., Lindstedt, P. 109
ISCORMA 2007 FIELD BALANCING OF A GENERATOR USING A MODEL-BASED METHOD Bachschmid, N., Pennacchi, P., Vania, A. 111
ISCORMA 2007 ANALYSIS AND DIAGNOSIS OF VIBRATION INDUCED UNEVEN COMMUTATOR WEAR ON A COMMUTER JET APU Adams, M., 112
ISCORMA 2007 SIMULATION OF THE EFFECTS OF THE UNBALANCED MAGNETIC PULL IN FOUR-POLES SLIM GENERATORS Pennacchi, P., Frosini, L. 113
ISCORMA 2007 HIGH SPEED TURBOCHARGER INSTABILITY Kirk, R. G., Kornhauser, A. A., Sterling, J., Alsaeed, A. 114
ISCORMA 2007 PATTERN RECOGNITION BASED SHAFT ANGLE ENCODER Pilat, A., Sawicki, J. T. 115
ISCORMA 2007 AN EXTERNALLY WATER PRESSURIZED BEARING IN A HYDRO GENERATING SET Canning, A. 116
ISCORMA 2007 THE EFFECT OF APPLIED HIGH SPEED BALANCING METHOD ON FLEXIBLE GENERATOR ROTOR RESPONSE IN OPERATION Racic, Z., Hidalgo, J. 118
ISCORMA 2007 NO VIBRATION - NO PROBLEM: OR IS THERE? Thomas, G. R. 119
ISCORMA 2007 STABILITY ANALYSIS OF A HIGH-SPEED SEAL TEST ROTOR WITH MARGINAL AND EXTENDED SQUEEZE-FILM DAMPERS --- THEORETICAL AND EXPERIMENTAL RESULTS Proctor, M. P., Gunter, E. J. 201
ISCORMA 2007 STABILITY LIMITS OF A SELF-EXCITED TORSIONAL VIBRATION SYSTEM Ecker, H., Springer, H. 202
ISCORMA 2007 STABILITY IMPROVEMENT OF A ROTOR SYSTEM BY MEANS OF FLEXIBLE SLEEVE FLUID FILM BEARING Yu, X., Krodkiewski, J. M. 203
ISCORMA 2007 STIFFNESS AND DAMPING RESULTS FROM PERTURBATION TESTING OF EXTERNALLY PRESSURIZED RADIAL GAS BEARINGS Hatch, C. T., Colwell, R. G., Murray, M. J., Gillis, J. B., Bently, D. E. 301
ISCORMA 2007 THE CONTROL OF BEARING STIFFNESS USING SHAPE MEMORY Lees, A. W., Jana , S., Inman, D. J., Cartmell, M. P. 303
ISCORMA 2007 CFD RESULTS OF INLET AND REVERSE PUMPING FLOW FOR COMMON LABYRINTH SEAL LEAK PATH GEOMETRIES Kirk, R. G., Guo, Z. 307
ISCORMA 2007 NON-LINEAR MODEL OF A TILTING PAD GAS JOURNAL BEARING FOR THE POWER MEMS MICROTURBINE Martyna, M., Kozanecki, Z. 309
ISCORMA 2007 ELASTOHYDRODYNAMIC CONTACT THEORY IN FOIL GASDYNAMIC BEARING MODEL Temis, J. M., Temis, M. J., Meshcheryakov, A. B. 310
ISCORMA 2007 THE EFFECT OF STRUCTURAL DISTORTION ON THE FATIGUE LIFE OF LARGE-DIAMETER BALL BEARING Sawicki, J. T., Johansson, S. A., Rumbarger, J. H., Sharpless, R. B. 311
ISCORMA 2007 FREQUENCY EFFECTS ON LINEAR STIFFNESS AND DAMPING COEFFICIENTS OF TILTING-PAD JOURNAL BEARINGS Dmochowski, W. 312
ISCORMA 2007 A ROTORDYNAMIC MODEL FOR USE IN HIGH-SPEED GAS BEARING TESTING Hatch, C. T., Colwell, R. G., Murray, M. J., Bently, D. E. 313
ISCORMA 2007 A LATERAL ROTOR DYNAMIC CALCULATION METHOD FOR ASYNCHRONOUS MACHINES CONSIDERING ELECTROMAGNETIC FORCES BY ANALYZING THE CALCULATED ROTOR ORBIT Werner, U. 401
ISCORMA 2007 VIBRATION SUPPRESSION OF WASHING/SPIN-DRYER MACHINE USING DISCONTINUOUS SPRING CHARACTERISTICS Ishida, Y., Liu, J. 402
ISCORMA 2007 VIBRATION CONTROLLED DETERMINATION OF THE CLUTCH ANGLE FOR SINGLE-SHAFT COUPLINGS Humer, M., Rosendahl, J. 403
ISCORMA 2007 STUDY ON DIAGNOSTIC INDICATORS OF GEAR TOOTH CRACK LENGTH AND LOCATION IN A VIRTUAL GEAR TRANSMISSION Carmignani, C., Forte, P., Melani, G. 404
ISCORMA 2007 EXPERIMENTAL STUDIES OF RUB CONTROL WITH AN ACTIVE AUXILIARY BEARING Ginzinger, L., Ulbrich, H. 405
ISCORMA 2007 CHARACTERIZATION AND MODELING OF SHAFT CRACKS AND ROTATING ASYMMETRIES Wu, X., Meagher, J. 407
ISCORMA 2007 DETECTION OF ASYMMETRY IN FLEXIBLE ROTATING SYSTEMS FROM THE ZEROS OF SYSTEM-IDENTIFIED MODELS Seo, Y.-H., Lee, C.-W., Park, K. C. 410
ISCORMA 2007 MODELING AND TESTING OF GEAR POWER TRANSMISSION Barzdaitis, V., Bogdevicius, M., Didziokas, R., Mažeika, P. 411
ISCORMA 2007 THE INFLUENCE OF LABYRINTH SEAL DESIGN ON STEAM TURBINE ROTOR STABILITY: PARAMETRIC STUDY Prchlik, L., Wittner, M., Misek, T., Albl, P. 412
ISCORMA 2007 LATERAL FORCED VIBRATION OF BEAM WITH MATERIAL DAMPING Norek, R. S. 413
ISCORMA 2007 MODEL BASED DIAGNOSTICS OF ROTATING MACHINERY Iwaniec, J., Bednarz, J., Uhl, T., Barszcz, T. 414
ISCORMA 2007 VIBRATION BASED METHOD FOR SHAFT CRACK DETECTION Gosiewski, Z., Sawicki, J. T. 415
ISCORMA 2007 DISCRETE MODELING OF ROTORS: METHODS AND LIMITATIONS Muszynska, A., Jones, D. I. G. 416
ISCORMA 2007 PARAMETRIC CONTROL OF BLADE VIBRATIONS IN ROTATING MACHINERY Pumhöessel, T. 501
ISCORMA 2007 STABILITY OF TILTING 5-PAD JOURNAL BEARING Ghoneam, S. M., Strzelecki, S., Towarek, Z. 502
ISCORMA 2007 THE INFLUENCE OF LINEAR AND NONLINEAR MODES ON THE DRY FRICTION BACKWARD WHIRL IN ROTOR/STATOR SYSTEMS Jiang, J., Zhang, X. 503
ISCORMA 2007 EXPERIMENTAL STUDY OF DESTABILIZING FORCE IN CENTRIFUGAL COMPRESSOR IMPELLER Kanki, H., Adachi, K., Jyoutoku, M. 504
ISCORMA 2007 INVESTIGATION OF TRANSIENT RESPONSE UNDER SHOCK LOAD IN A HIGH SPEED SEPARATOR WITH NONLINEAR SUPPORT ELEMENTS Zhang, Y. 507
ISCORMA 2007 DYNAMIC BEHAVIOR OF GTU ROTOR-BEARINGS-CASING SYSTEM Belyaev, V. E., Petrov, E. V., Temis, J. M., Temis, M. J., Egorov, A. M. 509
ISCORMA 2007 VIBRATION TRANSMISSION THROUGH BEARINGS WITH APPLICATION TO GEARBOXES Fleming, D. P. 510
ISCORMA 2007 HIGH-TEMPERATURE TURBINE APPLICATIONS USING OPEN POROUS METALLIC FOAMS WITH THERMAL BARRIER COATINGS AND COOLING HOLE ARRAYS Kreutz, E. W., Walther, K., Poprawe, R., Angel, S., Ratte, E., Bleck, W., Bobzin, K., Lugscheider, E., Nickel, R., Richardt, K., Bagcivan, N. 511
ISCORMA 2007 MODELING AND NONLINEAR CONTROL OF A TOOTHLESS SELF-BEARING MOTOR Grochmal, T. R., Forbrich, C., Lynch, A. F. 512
ISCORMA 2007 NEW FACILITY TO TEST FLUID FILM JOURNAL BEARINGS AT THE NASA GLENN RESEARCH CENTER IN CLEVELAND, OHIO, USA Dimofte, F., Ene, N. M., Handschuh, R. F., Keith, T. G., Jr. 513

Copyright © 2017 Rotating Machinery Analysis, Inc.. All rights reserved.